Commit Graph

2871 Commits

Author SHA1 Message Date
Joao Martins
d239a5427f conf: add caps to virDomainDefFormat*
And use the newly added caps->host.netprefix (if it exists) for
interface names that match the autogenerated target names.

Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
2016-02-04 12:38:26 +00:00
Martin Kletzander
92757d4d2d systemd: Add virSystemdGetMachineNameByPID
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-02-03 14:57:43 +01:00
Martin Kletzander
9ba2646291 Revert "systemd: Escape only needed characters for machined"
This reverts commit 0e0149ce91.

That commit was added to comply with systemd rules that were changed in
the meantime, so this patch is pointless.
2016-02-03 14:44:37 +01:00
Eric Blake
041f7c9304 tests: avoid realpath in test-lib.sh
Ever since commit ace4aecd, running 'make check' on RHEL 6 produces:

./test-lib.sh: line 21: realpath: command not found

for every shell script test, because 'realpath' was not part of
coreutils back then.

* tests/test-lib.sh (_scriptdir): Compute with only portable shell.

Signed-off-by: Eric Blake <eblake@redhat.com>
2016-02-01 13:03:28 -07:00
Andrea Bolognani
771eaeb2b3 pci: Phase out virPCIDeviceReattachInit()
The name is confusing, and there are just two uses: one is a test case,
and the other will be removed as part of an upcoming refactoring of
the hostdev code.
2016-01-28 11:31:28 +01:00
Pavel Hrdina
36785c7e77 device: cleanup input device code
The current code was a little bit odd.  At first we've removed all
possible implicit input devices from domain definition to add them later
back if there was any graphics device defined while parsing XML
description.  That's not all, while formating domain definition to XML
description we at first ignore any input devices with bus different to
USB and VIRTIO and few lines later we add implicit input devices to XML.

This seems to me as a lot of code for nothing.  This patch may look
to be more complicated than original approach, but this is a preferred
way to modify/add driver specific stuff only in those drivers and not
deal with them in common parsing/formating functions.

The update is to add those implicit input devices into config XML to
follow the real HW configuration visible by guest OS.

There was also inconsistence between our behavior and QEMU's in the way,
that in QEMU there is no way how to disable those implicit input devices
for x86 architecture and they are available always, even without graphics
device.  This applies also to XEN hypervisor.  VZ driver already does its
part by putting correct implicit devices into live XML.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-01-26 17:53:33 +01:00
Pavel Hrdina
2686e44e05 tests: add some missing tests to qemuxml2xmltest
Those tests are in qemuargv2xmltest and it makes sense to include them
also in qemuxml2xmltest and qemuxml2argvtest.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-01-26 17:53:33 +01:00
Pavel Hrdina
2d446b6eeb tests: use virtTestDifferenceFull in tests where we have output file
This will enable regenerate functionality for those tests to make
developer lives easier while updating tests.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-01-26 17:53:33 +01:00
Peter Krempa
7141fc7a27 test: Touch up error message when attempting to pin invalid vCPU
Report
error: invalid argument: requested vcpu '100' is not present in the domain
instead of
error: invalid argument: requested vcpu is higher than allocated vcpus
2016-01-25 17:53:08 +01:00
Peter Krempa
f82a8014c0 tests: qemuxml2xml: Order pinning information numerically
A future patch will refactor the storage of the pinning information in a
way where the ordering will be lost. Order them numerically to avoid
changing the tests later.
2016-01-25 17:53:07 +01:00
Michal Privoznik
35c3aab44d vmx: Adapt to emptyBackingString for cdrom-image
https://bugzilla.redhat.com/show_bug.cgi?id=1266088

We are missing this value for cdrom-image device. It seems like
there's no added value to extend this to other types of disk
devices [1].

1: https://www.redhat.com/archives/libvir-list/2016-January/msg01038.html

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-01-25 08:34:23 +01:00
Roman Bogorodskiy
ef01addb38 bhyve: bhyveload: respect boot dev and boot order
Make bhyveload respect boot order as specified by os.boot section of the
domain XML or by "boot order" for specific devices. As bhyve does not
support a real boot order specification right now, it's just about
choosing a single device to boot from.
2016-01-25 04:19:33 +03:00
Ian Campbell
daeace5c5d libxl: Support cmdline= in xl config files
... and consolidate the cmdline/extra/root parsing to facilitate doing
so.

The logic is the same as xl's parse_cmdline from the current xen.git master
branch (e6f0e099d2c17de47fd86e817b1998db903cab61).

On the formatting side switch to producing cmdline= instead of extra=.

Update a few tests and add serveral more.
  - test-cmdline is added to test the exclusive use of cmdline.
  - test-fullvirt-direct-kernel-boot.cfg is updated due to the switch
    on the formatting side and now tests the exclusive use of cmdline=.
  - Tests are added for both paravirt and fullvirt where the .cfg uses
    extra= and (paravirt only) root=. These are format (xl->xml) only
    since the inverse will generate cmdline= hence is not a round trip
    (which was already true if using root=, which used to generate
    extra= on the way back).
  - Tests are added for both paravirt and fullvirt where the .cfg
    declares cmdline= as well as bogus extra= and (paravirt only) root=
    entries which should be ignored. Again these are format only tests
    since the inverse won't include the bogus lines.

The last two bullets here required splitting the DO_TEST macro into
two halves, as is done in the xmconfigtest.c case.

In order to introduce a use of VIR_WARN for logging I had to add
virerror.h and VIR_LOG_INIT.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
2016-01-21 10:48:44 -07:00
John Ferlan
4f84617078 conf: Add storage pool device attribute part_separator
Add a new storage pool source device attribute 'part_separator=[yes|no]'
in order to allow a 'disk' storage pool using a device mapper multipath
device to not add the "p" partition separator to the generated device
name when libvirt_parthelper is run.

This will allow libvirt to find device mapper multipath devices which were
configured in /etc/multipath.conf to use 'user_friendly_names' or custom
'alias' names for the LUN.
2016-01-19 13:02:59 -05:00
Michal Privoznik
7f866e54df qemuTestDriverInit: fill driver with zeroes
In the commit aea47e48c4 we have fixed a single pointer within
driver structure. Since all callers pass statically allocated
driver on stack other pointers within driver may contain random
values too. Before touching it lets overwrite it with zeroes and
thus fix all dangling pointers.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-01-18 13:22:14 +01:00
Cole Robinson
ebfd6f45c3 testutils: Fix coverity warning with REGENERATE_OUTPUT
- Don't double check for expectName
- actual is always non-NULL by this point, so don't check it either
2016-01-12 11:30:19 -05:00
Dmitry Andreev
981c01d419 qemu: add support of optional 'autodeflate' attribute
Autodeflate can be enabled/disabled for memballon device
of model 'virtio'.

xml:
<devices>
  <memballoon model='virtio' autodeflate='on'/>
</devices>

qemu:
qemu -device virtio-balloon-pci,...,deflate-on-oom=on

Autodeflate cannot be enabled/disabled for running domain.
2016-01-12 10:48:21 -05:00
Dmitry Andreev
3522a311ea qemu: add capability check for memballoon 'deflate-on-oom' feature
Add appropriate capability check and new virQEMUCaps flag for the new
virtio balloon feature. QEMU commit with the complete feature description:
http://git.qemu.org/?p=qemu.git;a=commit;h=e3816255bf4b6377bb405331e2ee0dc14d841b80
2016-01-12 10:48:21 -05:00
Laine Stump
bd04ad42e7 qemu: auto-add a USB2 controller set for Q35 machines
Use virDomainDefAddUSBController() to add an EHCI1+UHCI1+UHCI2+UHCI3
controller set to newly defined Q35 domains that don't have any USB
controllers defined.
2016-01-11 13:21:10 -05:00
Laine Stump
163338ec28 qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35
The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4))
on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A,
so let's attempt to make the virtual machine match that for
controllers with auto-assigned addresses when possible.

Three test cases were added to assure that the proper addresses are
assigned - one with a single set of unaddressed USB controllers, one
with 3 (to grab both preferred slots plus one more), and one with the
order of the controller definitions reordered, to assure that the
auto-assignment isn't mixed up by order.
2016-01-11 13:04:17 -05:00
Michal Privoznik
0a84286d8f qemu: Introduce QEMU_CAPS_VSERPORT_CHANGE
This capability tells if qemu is capable of vserport_change
events.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-01-11 17:17:52 +01:00
Cole Robinson
fde937bda0 qemu: command: wire up usage of q35/ich9 disable s3/s4
If the q35 specific disable s3/s4 setting isn't supported, fallback to
specifying the PIIX setting, which is the previous behavior. It doesn't
have any effect, but qemu will just warn about it rather than error:

  qemu-system-x86_64: Warning: global PIIX4_PM.disable_s3=1 not used
  qemu-system-x86_64: Warning: global PIIX4_PM.disable_s4=1 not used

Since it doesn't error, I don't think we should either, since there
may be configs in the wild that already have q35 + disable_s3/4 (via
virt-manager)
2016-01-10 15:16:38 -05:00
Cole Robinson
c77fd89000 qemu: caps: check for q35/ICH9 disable S3/S4
Update test data to match
2016-01-10 14:59:53 -05:00
Cole Robinson
5900356efb qemu: caps: Rename CAPS_DISABLE_S[34] to CAPS_PIIX_DISABLE_S[34]
These settings are specific to PIIX, so clarify it
2016-01-10 14:59:53 -05:00
Martin Kletzander
8156493d8d Fix USB model defaults for ppc64
The condition was checking for UHCI (and OHCI for ppc64) availability so
that it can specify the proper device instead of legacy usb.  However,
for ppc64, we don't need to check both OHCI and UHCI, but only OHCI as
that is the legacy default.  The condition is so big that it was just a
matter of time when someone will make a mistake there, so let's use more
lines so that it is visible what the condition checks for.

This fixes usage of -device instead of -usb for ppc64 that supports
pci-usb-ohci and does not support piix3-usb-uhci.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1297020

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-01-09 18:39:17 +01:00
Martin Kletzander
aea47e48c4 Avoid wild securityManager pointer in tests
For some reason we are not setting the driver with memset() to zeros.
But since commit 74abc3deac
driver->securityManager is being accessed and qemuagenttest started
crashing due to that.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-01-09 18:28:53 +01:00
Cole Robinson
8d48ce02c3 tests: qemuxml2xml: Wire up QEMUCaps usage
Future changes will make some of these tests dependent on specific
QEMUCaps flags, so wire up the basic handling. Flags will be added
in future patches.
2016-01-08 21:21:34 -05:00
Cole Robinson
af3bd44fd6 tests: add genericxml2xmltest
For testing hypervisor independent XML handling. Right now it's just
populated with an example test case.
2016-01-08 21:21:34 -05:00
Cole Robinson
f8ce014319 tests: qemuxml2xml: drop early file loading
For the standard active/inactive XML testing, if we leave the file loading
up to the generic XML2XML infrastructure, we get the benefit of
VIR_TEST_REGENERATE_OUTPUT, at the price of a few more disk reads. Seems
worth it.
2016-01-08 21:21:34 -05:00
Cole Robinson
5770c17074 tests: Share domain XML2XML compare helper
This creates a shared function in testutils.c that consolidates all
the slightly different implementations.
2016-01-08 21:21:34 -05:00
Cole Robinson
ace4aecd5e tests: Fix running schematests directly from topdir
Previously it failed like:

$ ./tests/domainschematest
./tests/domainschematest: line 4: ./test-lib.sh: No such file or directory
2016-01-08 21:21:34 -05:00
Cole Robinson
825d357a46 tests: Add newlines with VIR_TEST_REGENERATE_OUTPUT
Since test files are formatted predictably nowadays, we can make
VIR_TEST_REGENERATE_OUTPUT handle most cases for us with a simple
replacement. test-wrap-argv.pl is still canon, but this bit makes
it easier to confirm test output changes during active development.
2016-01-08 21:21:34 -05:00
Jim Fehlig
ec63000a62 xenconfig: support vif bandwidth in xm and xl parser and formatter
Both xm and xl config have long supported specifying vif rate
limiting, e.g.

vif = [ 'mac=00:16:3E:74:3d:76,bridge=br0,rate=10MB/s' ]

Add support for mapping rate to and from <bandwidth> in the xenconfig
parser and formatter. rate is mapped to the required 'average' attribute
of the <outbound> element, e.g.

  <interface type='bridge'>
    ...
    <bandwidth>
      <outbound average='10240'/>
    </bandwidth>
  </interface>

Also add a unit test to check the conversion logic.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2016-01-08 18:56:00 -07:00
Jim Fehlig
1dd34bbb4b xenconfig: support vif bandwidth in sexpr parser and formatter
The xen sexpr config format has long supported specifying vif rate
limiting, e.g.

  (device
    (vif
      (mac '00:16:3e:1b:b1:47')
      (rate '10240KB/s')
      ...
    )
  )

Add support for mapping rate to and from <bandwidth> in the xenconfig
sexpr parser and formatter. rate is mapped to the required 'average'
attribute of the <outbound> element, e.g.

  <interface type='bridge'>
    ...
    <bandwidth>
      <outbound average='10240'/>
    </bandwidth>
  </interface>

Also add unit tests to check the conversion logic.

This patch benefits both the old xen driver and the libxl driver.
Both drivers gain support for vif bandwidth when converting to/from
domXML and xen-sxpr. In addition, the old xen driver will now be
able to handle vif 'rate' setting when communicating with xend.
2016-01-08 18:56:00 -07:00
Andrea Bolognani
117375ca49 tests: qemuxml2argv: Add tests for USB controller on q35 2016-01-08 19:46:43 +01:00
Cole Robinson
a4af45c065 tests: qemuxml2xml: Convert fprintf to VIR_TEST_DEBUG 2016-01-08 13:25:21 -05:00
Jiri Denemark
09bbd96239 qemu: Rename qemuMonitorMigrationStatus struct
The structure actually contains migration statistics rather than just
the status as the name suggests. Renaming it as
qemuMonitorMigrationStats removes the confusion.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-01-08 18:18:58 +01:00
Pavel Hrdina
4921c54411 tests.nwfilterebiptablestest: swap actual and expected
Those parameters should be in opposite order.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-01-08 16:08:15 +01:00
Pavel Hrdina
c060f44c16 tests.testutils: use virTestDifferenceFull in virtTestCompareToFile
Let's use the new virTestDifferenceFull function that will regenerate
the expected output and fail the test to let developer know that there
something was updated.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-01-08 16:08:15 +01:00
Pavel Hrdina
781d70c027 tests.testutils: use VIR_TEST_REGENERATE_OUTPUT for virTestDifferenceFull
This patch enable regeneration of expected output file for
virTestDifferenceFull.  It also introduces new
virTestDifferenceFullNoRegenerate function for special cases, where we
don't want to regenerate output.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-01-08 16:08:15 +01:00
Pavel Hrdina
0104c43195 tests: add helper for VIR_TEST_REGENERATE_OUTPUT flag
When this flag is specified, some of the expected output files will be
regenerated with the actual output data.  Use helper function like for
other flags.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-01-08 16:05:26 +01:00
Martin Kletzander
7140807917 qemu: Don't bother user with libvirt-internal paths
If user defines a virtio channel with UNIX socket backend and doesn't
care about the path for the socket (e.g. qemu-agent channel), we still
generate it into the persistent XML.  Moreover when then user renames
the domain, due to its persistent socket path saved into the per-domain
directory, it will not start.  So let's forget about old generated paths
and also stop putting them into the persistent definition.

https://bugzilla.redhat.com/show_bug.cgi?id=1278068

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-01-07 11:29:53 +01:00
Michal Privoznik
d7db33bfe9 qemu: Specify format= iff disk source is not empty
Just recently, qemu forbade specifying format for sourceless
disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense.
If there's no file to open, why specify its format. Anyway, I
have a domain like this:

    <disk type='file' device='cdrom'>
      <driver name='qemu' type='raw'/>
      <target dev='hda' bus='ide'/>
      <readonly/>
      <address type='drive' controller='0' bus='0' target='0' unit='0'/>
    </disk>

and obviously I am unable to start it. Therefore, a fix on our
side is needed too.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-01-05 16:41:16 +01:00
Michal Privoznik
50371ed1d5 tests: Make test-wrap-argv.pl executable
While 'perl test-wrap-argv.pl' is not too long,
'./test-wrap-argv.pl' is shorter.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-12-29 09:37:35 +01:00
Dmitry Mishin
53a15aed39 qemu: Process new 'append' attribute for char dev with output to a file
By default, QEMU truncates serial file on open. Sometimes, it could be weird -
for example, when we are trying to investigate some event, which occured several
restarts ago. This patch adds an ability to preserve previous content.

Signed-off-by: Dmitry Mishin <dim@virtuozzo.com>
2015-12-24 14:50:33 +00:00
Dmitry Mishin
429b4211d0 tests: add qemu 2.6 caps test
Signed-off-by: Dmitry Mishin <dim@virtuozzo.com>
2015-12-24 14:49:38 +00:00
Andrea Bolognani
6d9cdd2a57 pci: Introduce virPCIStubDriver enumeration
This replaces the virPCIKnownStubs string array that was used
internally for stub driver validation.

Advantages:

  * possible values are well-defined
  * typos in driver names will be detected at compile time
  * avoids having several copies of the same string around
  * no error checking required when setting / getting value

The names used mirror those in the
virDomainHostdevSubsysPCIBackendType enumeration.
2015-12-21 11:17:22 +01:00
Andrea Bolognani
e1b2458364 pci: Remove 'reprobe' parameter from virPCIDeviceUnbind()
The value is not inspected inside the function, so it makes more
sense for the caller to change the device's setting explicitly.
2015-12-21 11:04:37 +01:00
Jim Fehlig
5b74103b0b Xen: support maxvcpus in xm and xl config
From: Ian Campbell <ian.campbell@citrix.com>

xend prior to 4.0 understands vcpus as maxvcpus and vcpu_avail
as a bit map of which cpus are online (default is all).

xend from 4.0 onwards understands maxvcpus as maxvcpus and
vcpus as the number which are online (from 0..N-1). The
upstream commit (68a94cf528e6 "xm: Add maxvcpus support")
claims that if maxvcpus is omitted then the old behaviour
(i.e. obeying vcpu_avail) is retained, but AFAICT it was not,
in this case vcpu==maxcpus==online cpus. This is good for us
because handling anything else would be fiddly.

This patch changes parsing of the virDomainDef maxvcpus and vcpus
entries to use the corresponding 'maxvcpus' and 'vcpus' settings
from xm and xl config. It also drops use of the old Xen 3.x
'vcpu_avail' setting.

The change also removes the maxvcpus limit of MAX_VIRT_VCPUS (since
maxvcpus is simply a count, not a bit mask), which is particularly
crucial on ARM where MAX_VIRT_CPUS == 1 (since all guests are
expected to support vcpu placement, and therefore only the boot
vcpu's info lives in the shared info page).

Existing tests adjusted accordingly, and new tests added for the
'maxvcpus' setting.
2015-12-18 17:52:00 -07:00
Jim Fehlig
60ac2aa821 Xen: xenconfig: remove xendConfigVersion from public sexpr functions
Remove use of xendConfigVersion in the s-expresion config formatter/parser
in src/xenconfig/. Adjust callers in the xen and libxl drivers accordingly.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-12-17 21:28:48 -07:00
Jim Fehlig
f2b4a65728 Xen: tests: use latest XEND_CONFIG_VERSION in xml2sexpr tests
Change all xml2sexpr tests to use the latest XEND_CONFIG_VERSION
(XEND_CONFIG_VERSION_3_1_0 = 4). Fix tests that do not conform to
the latest version.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-12-17 21:22:34 -07:00
Jim Fehlig
bec993d60a Xen: xenconfig: remove disks from '(image)' sexpr
It has been quite some time since xend required specifying cdroms
and fds in '(image (hvm ...))'. Remove the code from the parsing
and formatting functions and fixup the associated tests.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-12-17 21:22:34 -07:00
Jim Fehlig
87dce7a762 Xen: tests: use latest XEND_CONFIG_VERSION in sexpr2xml tests
Change all sexpr2xml tests to use the latest XEND_CONFIG_VERSION
(XEND_CONFIG_VERSION_3_1_0 = 4). Fix tests that do not conform to
the latest version.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-12-17 21:22:33 -07:00
Jim Fehlig
7d7c08be1c Xen: xenconfig: remove xendConfigVersion from public functions
Remove use of xendConfigVersion in the xm and xl config formatter/parsers
in src/xenconfig/. Adjust callers in the xen and libxl drivers accordingly.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-12-17 21:22:33 -07:00
Jim Fehlig
9e6d721985 Xen: tests: use latest XEND_CONFIG_VERSION in xm/xl tests
Change all tests to use the latest XEND_CONFIG_VERSION
(XEND_CONFIG_VERSION_3_1_0 = 4). Fix tests that do not conform to
the latest version.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-12-17 21:22:33 -07:00
Jim Fehlig
134e05e005 Xen: tests: remove old xml2sexpr tests
Remove XML to s-expression converstion tests for old xend 3.0.2
config format.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-12-17 21:22:33 -07:00
Jim Fehlig
ed5cf72035 Xen: tests: remove old sexpr2xml tests
Remove s-expression to XML conversion tests for old xend 3.0.2
config format.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-12-17 21:22:33 -07:00
Jim Fehlig
f281926e1d Xen: tests: remove net-ioemu xm config test
Remove the fullvirt-net-ioemu test since explicitly specifying
'type=ioemu' has not been needed in xm/xend for a long time. It is
not used at all in xl/libxl.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-12-17 21:22:33 -07:00
Jim Fehlig
59baedd87f Xen: tests: remove old xm config tests
Remove xm config tests for old xend 3.0.2 config format.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-12-17 21:22:33 -07:00
Peter Krempa
ace1ee225f test: qemuxml2argv: Mock virMemoryMaxValue to remove 32/64 bit difference
Always return LLONG_MAX even on 32 bit systems. The limitation
originates from our use of "unsigned long" in several APIs. The internal
data type is unsigned long long. Make the test suite deterministic by
removing the architecture difference.

Flaw was introduced in 645881139b where
I've added a test that uses too large numbers.
2015-12-11 12:23:38 +01:00
Andrea Bolognani
8df2f1d874 tests: scsihost: Use fakerootdir instead of fakesysfsdir
This updates the test program to make it consistent with recent changes
to the mock libraries, and also opens up the possibility of mocking more
than just /sys in the future.
2015-12-09 15:22:59 +01:00
Andrea Bolognani
d2939c0f4d tests: Use more specific names for variables
Instead of fakesysfsdir, which is very generic, use fakesysfspcidir and
fakesysfscgroupdir. This makes it explicit what part of the fake sysfs
filesystem they're referring to, and also leaves open the possibility of
handling files in two unrelated parts of the fake sysfs filesystem.

No functional changes.
2015-12-09 15:22:58 +01:00
Andrea Bolognani
46468c62ff tests: Rename LIBVIRT_FAKE_SYSFS_DIR to LIBVIRT_FAKE_ROOT_DIR
The old name is no longer accurate, since now we're using its value as
the root of the fake filesystem.

No functional changes.
2015-12-09 15:22:58 +01:00
Andrea Bolognani
bc80c45d5d tests: cgroupmock: Use the temporary directory as fake root
We might need to mock files living outside SYSFS_PREFIX later on,
so it's better to treat the temporary directory we are passed via
the environment as the root of the fake filesystem and create
SYSFS_PREFIX inside it.

The environment variable name will be changed to reflect the new use
we're making of it in a later commit.
2015-12-09 15:22:58 +01:00
Andrea Bolognani
f94398e72e tests: pcimock: Use the temporary directory as fake root
We might need to mock files living outside PCI_SYSFS_PREFIX later on,
so it's better to treat the temporary directory we are passed via
the environment as the root of the fake filesystem and create
PCI_SYSFS_PREFIX inside it.

The environment variable name will be changed to reflect the new use
we're making of it in a later commit.
2015-12-09 15:22:58 +01:00
Andrea Bolognani
b76d936670 tests: pcimock: Remove check for fakesysfsdir
init_env() will return right away if fakesysfsdir is already
initialized, so this check is redundant.
2015-12-09 15:22:58 +01:00
Andrea Bolognani
8e3122faf5 tests: scsihost: Don't set LIBVIRT_FAKE_SYSFS_DIR
The test program is not preloading any of the mock libraries that read
that environment variable, so setting it is pointless.
2015-12-09 15:22:58 +01:00
Pavel Hrdina
91a00424db xen: use virDomainDefPostParse for parsing XM/XL/SEXPR cofings
This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-12-09 12:59:21 +01:00
Pavel Hrdina
1dc38b729b lxc: use virDomainDefPostParse for parsing LXC config string
This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-12-09 12:59:02 +01:00
Pavel Hrdina
eba20715f9 vmware/vmx: use virDomainDefPostParse after parsing vmx config
This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-12-09 12:36:44 +01:00
Peter Krempa
645881139b qemu: domain: Prevent overflows in memory alignment code
Since libvirt for dubious historical reasons stores memory size as
kibibytes, it's possible that the alignments done in the qemu code
overflow the the maximum representable size in bytes. The XML parser
code handles them in bytes in some stages. Prevent this by doing
overflow checks when alinging the size and add a test case.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1260576
2015-12-04 15:21:20 +01:00
Michal Privoznik
01f6cbcf07 tests: Run virnetdaemontest iff WITH_YAJL
The test itself and daemon require a JSON parsing library. If not
present, skip the test.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-12-01 14:03:30 +01:00
Ján Tomko
971f5f229d qemu: build command line for virtio-input-host device
<input type='passthrough' bus='virtio'>
  <source evdev='/dev/input/event1234'/>
</input>

results in:

-device virtio-input-host-pci,id=input0,evdev=/dev/input/event1234

https://bugzilla.redhat.com/show_bug.cgi?id=1231114
2015-11-30 13:00:04 +01:00
Ján Tomko
1a538a07c7 conf: add XML for input device passthrough
Add xml for the new virtio-input-host-pci device:
<input type='passthrough' bus='virtio'>
  <source evdev='/dev/input/event1234'/>
</input>

https://bugzilla.redhat.com/show_bug.cgi?id=1231114
2015-11-30 12:29:03 +01:00
Ján Tomko
e9d7550ac2 qemu: add capability for virtio-input-host-device
Add QEMU_CAPS_VIRTIO_INPUT_HOST for both
virtio-input-host-device and virtio-input-host-pci.
2015-11-30 12:29:02 +01:00
Ján Tomko
7210cef452 qemu: build command line for virtio input devices
Add support for these qemu devices:
virtio-mouse-{pci,device}
virtio-keyboard-{pci,device}
virtio-tablet-{pci,device}

https://bugzilla.redhat.com/show_bug.cgi?id=1231114
2015-11-30 12:25:36 +01:00
Ján Tomko
bebdfafb2b conf: parse and format virtio input bus in domain XML
To be used by the family of virtio input devices:

<input type='mouse' bus='virtio'/>
<input type='tablet' bus='virtio'/>
<input type='keyboard' bus='virtio'/>

https://bugzilla.redhat.com/show_bug.cgi?id=1231114
2015-11-30 12:22:06 +01:00
Ján Tomko
5c62d6c456 qemu: add capabilities for virtio input devices
Add capabilities for virtio-keyboard, virtio-mouse
and virtio-tablet devices:

name "virtio-keyboard-device", bus virtio-bus
name "virtio-keyboard-pci", bus PCI
name "virtio-mouse-device", bus virtio-bus
name "virtio-mouse-pci", bus PCI
name "virtio-tablet-device", bus virtio-bus
name "virtio-tablet-pci", bus PCI

Map both -device and -pci versions of the device to one capability.

https://bugzilla.redhat.com/show_bug.cgi?id=1231114
2015-11-30 12:21:31 +01:00
Pavel Hrdina
cb97426208 virlogd: fix crash if log file exists and it's larger the maxlen
If for some reason there is an existing log file, that is larger then
max length of log file, we need to rollover that file immediately.
Trying to figure out how much data we could write will resolve in
overflow of unsigned variable 'towrite' and this leads to segfault.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-11-30 10:45:45 +01:00
Marc-André Lureau
06198b9c73 qemu: add virtio-gpu virgl support
Check if virtio-gpu provides virgl option, and add qemu command line
formatter.

It is enabled with the existing accel3d attribute:
<model type='virtio' heads='1'>
 <acceleration accel3d='yes'/>
</model>

Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-11-27 16:48:53 +01:00
Marc-André Lureau
21373feb4e qemu: add virtio video device
qemu 2.5 provides virtio video device.  It can be used with -device
virtio-vga for primary devices, or -device virtio-gpu for non-vga
devices. However, only the primary device (VGA) is supported with this
patch.

Reference:
https://bugzilla.redhat.com/show_bug.cgi?id=1195176

Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-11-27 16:48:53 +01:00
Martin Kletzander
0e0149ce91 systemd: Escape only needed characters for machined
Machine name escaping follows the same rules as serice name escape,
except that '.' and '-' must not be escaped in machine names, due
to a bug in systemd-machined.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1282846

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-11-27 16:39:46 +01:00
Martin Kletzander
baa3b463b3 virtlogd: Fix build without DBus
The rule for virrotatingfiletest was defined in DBUS-only block even
though the test does not use DBus at all.  Also DBUS_CFLAGS and
DBUS_LIBS are removed from the rules.  The original error was:

/usr/lib/gcc/x86_64-pc-linux-gnu/5.2.0/../../../../lib64/Scrt1.o: In
function `_start':
(.text+0x20): undefined reference to `main'

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-11-27 16:39:46 +01:00
Guido Günther
35b2a2d99a virtlogd: use %llu to print 64bit types
Otherwise we fail on 32bit with:

CC     logging/virtlogd-log_daemon_dispatch.o
logging/log_daemon_dispatch.c: In function 'virLogManagerProtocolDispatchDomainReadLogFile':
logging/log_daemon_dispatch.c:120:9: error: format '%zu' expects argument of type 'size_t', but argument 7 has type 'uint64_t' [-Werror=format]
2015-11-26 19:37:37 +01:00
Daniel P. Berrange
910e65d973 util: add APIs for reading/writing from/to rotating files
Add virRotatingFileReader and virRotatingFileWriter objects
which allow reading & writing from/to files with automation
rotation to N backup files when a size limit is reached. This
is useful for guest logging when a guaranteed finite size
limit is required. Use of external tools like logrotate is
inadequate since it leaves the possibility for guest to DOS
the host in between invokations of logrotate.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-26 14:28:55 +00:00
Martin Kletzander
e24eda48cf systemd: Escape machine name for machined
According to the documentation, CreateMachine accepts only 7bit ASCII
characters in the machinename parameter, so let's make sure we can start
machines with unicode names with systemd.  We already have a function
for that, we just forgot to use it.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1062943
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1282846

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-11-26 15:15:41 +01:00
Ján Tomko
7ec235ed09 schema: use a better regex for listen addresses
A domain with '::' as the listen address fails to validate.

Reuse the 'ipAddr' and 'dnsName' regexes from basictypes instead
of reinventing them.

https://bugzilla.redhat.com/show_bug.cgi?id=1285665
2015-11-26 11:05:18 +01:00
Dmitry Andreev
59fc0d0609 Allow multiple panic devices
'model' attribute was added to a panic device but only one panic
device is allowed. This patch changes panic device presence
from 'optional' to 'zeroOrMore'.
2015-11-25 14:46:21 +01:00
Dmitry Andreev
ca6ddffe2c qemu: add support for hv_crash feature as a panic device
Panic device type used depends on 'model' attribute.

If no model is specified then device type depends on hypervisor
and guest arch. 'pseries' model is used for pSeries guest and
'isa' model is used in other cases.

XML:
<devices>
  <panic model='hyperv'/>
</devices>

QEMU command line:
qemu -cpu <cpu_model>,hv_crash
2015-11-25 14:46:20 +01:00
Dmitry Andreev
5e8d2ebd7a tests: add tests for the new panic device attribute - 'model' 2015-11-25 12:30:05 +01:00
Jiri Denemark
2c4ba8b4f3 qemu: Use -incoming defer for migrations
Traditionally, we pass incoming migration URI on QEMU command line,
which has some drawbacks. Depending on the URI QEMU may initialize its
migration state immediately without giving us a chance to set any
additional migration parameters (this applies mainly for fd: URIs). For
some URIs the monitor may be completely blocked from the beginning until
migration is finished, which means we may be stuck in qmp_capabilities
command without being able to send any QMP commands.

QEMU solved this by introducing "defer" parameter for -incoming command
line option. This will tell QEMU to prepare for an incoming migration
while the actual incoming URI is sent using migrate-incoming QMP
command. Before calling this command we can normally talk to the
monitor and even set any migration parameters which will be honored by
the incoming migration.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2015-11-19 09:41:23 +01:00
Jiri Denemark
34b9fe6101 qemu: Move incoming URI code to qemu_migration
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2015-11-19 09:41:23 +01:00
Jiri Denemark
08600de376 qemu: Don't generate migration URI in qemuBuildCommandLine
Make callers of qemuBuildCommandLine responsible for providing the URI
which should be passed as a parameter for -incoming.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2015-11-19 09:41:23 +01:00
Joao Martins
b52779b30c util: add virDiskNameParse to handle disk and partition idx
Introduce a new helper function "virDiskNameParse" which extends
virDiskNameToIndex but handling both disk index and partition index.
Also rework virDiskNameToIndex to be based on virDiskNameParse.
A test is also added for this function testing both valid and
invalid disk names.

Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
2015-11-18 13:48:38 -07:00
Peter Krempa
4ad31f8f65 qemu: ppc64: Support memory hotplug without NUMA enabled
ppc64 guests don't require adding a NUMA node for hotplug memory to
work. Lift the requirement and add test cases.
2015-11-18 10:32:18 +01:00
Stefan Berger
5ed7afa9de tpm: adapt sysfs cancel path for new TPM driver
This patch addresses BZ 1244895.

Adapt the sysfs TPM command cancel path for the TPM driver that
does not use a miscdevice anymore since Linux 4.0. Support old
and new paths and check their availability.

Add a mockup for the test cases to avoid the testing for
availability of the cancel path.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2015-11-17 20:52:13 -05:00
Jiri Denemark
826ce0e77d tests: Add QEMU 2.4.0 capabilities
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2015-11-11 17:02:53 +01:00
Jiri Denemark
3c7059528d tests: Remove qemuxmlnstest
It's just a copy&paste of qemuxml2argv test anyway. We can test most of
them (except for qemuxmlns-qemu-ns-domain.xml which fails to validate
against our schema) by qemuxml2argv test.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2015-11-11 17:02:53 +01:00
Pavel Hrdina
fc03eb53c0 domain-conf: reorder usb controllers so the master is first
USB controllers can share the same 'index' which indicates, that there
is some sort of master-companion relationship.  Reorder the controllers
in XML in to place the master controller before its companions.  This is
required by QEMU to not fail with error message:

error: internal error: process exited while connecting to monitor:
2015-10-26T16:25:17.630265Z qemu-system-x86_64:
-device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x6:
USB bus 'usb.0' not found

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1166452

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-11-11 15:30:49 +01:00
Daniel P. Berrange
4e8993a250 qemu: assume various QEMU 0.10 features are always available
The -sdl and -net ...name=XXX arguments were both introduced
in QEMU 0.10, so the QEMU driver can assume they are always
available.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:18 +00:00
Daniel P. Berrange
72edc90a65 qemu: assume -vga is always available
As of QEMU 0.10.0 the -vga argument was introduced, so the
QEMU driver can assume it is always available.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:17 +00:00
Daniel P. Berrange
f81e0d480e qemu: assume -drive format is always available
As of QEMU 0.10.0 the -drive format= parameter was added,
so the QEMU driver can assume it is always available.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:17 +00:00
Daniel P. Berrange
468273a69c qemu: assume -drive cache always uses v2 option names
As of QEMU 0.10.0, the -drive cache option stopped using
the on/off value names, so the QEMU driver can assume
use of the new value names.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:17 +00:00
Daniel P. Berrange
2e90c9daf9 qemu: assume support for all migration protocols except rdma
Since we require QEMU 0.12.0, we can assume that QEMU supports
all of the fd, tcp, unix and exec migration protocols.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:17 +00:00
Daniel P. Berrange
8e5a21ee05 qemu: assume vnet-hdr feature is always available 2015-11-10 10:38:17 +00:00
Daniel P. Berrange
257e2056e7 qemu: really remove last traces of Xenner support
We have twice previously attempted to remove Xenner
support

  commit de9be0ab4d
  Author: Daniel P. Berrange <berrange@redhat.com>
  Date:   Wed Aug 22 17:29:01 2012 +0100

    Remove xenner support

  commit 92572c3d71
  Author: Ján Tomko <jtomko@redhat.com>
  Date:   Wed Feb 18 16:33:50 2015 +0100

    Remove code handling the QEMU_CAPS_DOMID capability

This change really does remove the last traces of it
in the capabilities handling code

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:15 +00:00
Daniel P. Berrange
dc7f6c3d30 qemu: assume -uuid is always available
The -uuid arg was added in QEMU 0.10.0, so the QEMU driver can
assume it is always available.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:02 +00:00
Daniel P. Berrange
4588c2ce97 qemu: assume -name is always available
The -name arg was added in QEMU 0.9.1, so the QEMU driver can
assume it is always available.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:02 +00:00
Daniel P. Berrange
f78610038d qemu: assume -drive argument is always available
As of QEMU 0.9.1 the -drive argument can be used to configure
all disks, so the QEMU driver can assume it is always available
and drop support for -hda/-cdrom/etc.

Many of the tests need updating because a great many were
running without CAPS_DRIVE set, so using the -hda legacy
syntax.

Fixing the tests uncovered a bug in the argv -> xml
convertor which failed to handle disk with if=floppy.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:01 +00:00
Daniel P. Berrange
f7ee34114d qemu: assume -no-reboot is always available
The -no-reboot arg was added in QEMU 0.9.0, so the QEMU driver
can now assume it is always present.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:01 +00:00
Daniel P. Berrange
9cd0fe69cd qemu: assume -vnc arg always takes a ':'
As of QEMU 0.9.0 the -vnc option accepts a ':' to separate port
from listen address, so the QEMU driver can assume that support
for listen addresses is always available.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:01 +00:00
Daniel P. Berrange
fc604c12d5 qemu: mandate QEMU version 0.12.0 or newer
Check the QEMU version and refuse to work with QEMU versions
older than 0.12.0. This is approximately the vintage of QEMU
that is available in RHEL-6 era distros.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:00 +00:00
Daniel P. Berrange
8afd34f2d8 tests: redo test argv file line wrapping
Back in

  commit bd6c46fa0c
  Author: Juerg Haefliger <juerg.haefliger@hp.com>
  Date:   Mon Jan 31 06:42:57 2011 -0500

    tests: handle backspace-newline pairs in test input files

all the test argv files were line wrapped so that the args
were less than 80 characters.

The way the line wrapping was done turns out to be quite
undesirable, because it often leaves multiple parameters
on the same line. If we later need to add or remove
individual parameters, then it leaves us having to redo
line wrapping.

This commit changes the line wrapping so that every
single "-param value" is one its own new line. If the
"value" is still too long, then we break on ',' or ':'
or ' ' as needed.

This means that when we come to add / remove parameters
from the test files line, the patch diffs will only
ever show a single line added/removed which will greatly
simplify review work.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-09 15:50:39 +00:00
Jiri Denemark
e4ee043636 Remove new lines from log messages
VIR_DEBUG and VIR_WARN will automatically add a new line to the message,
having "\n" at the end or at the beginning of the message results in
empty lines.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2015-11-04 13:09:35 +01:00
Andrea Bolognani
e739d956e8 tests: Remove unused nodeinfo test data
A bunch of files that we don't currently parse, and are very
unlikely to ever start parsing, made their way into the nodeinfo
test data. Get rid of them.
2015-10-22 09:32:58 +02:00
Ishmanpreet Kaur Khera
32cee5b2f0 Avoid using !STREQ and !STRNEQ
We have macros for both positive and negative string matching.
Therefore there is no need to use !STREQ or !STRNEQ. At the same
time as we are dropping this, new syntax-check rule is
introduced to make sure we won't introduce it again.

Signed-off-by: Ishmanpreet Kaur Khera <khera.ishman@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-10-21 15:03:35 +02:00
John Ferlan
cc2d49f9be qemu: Fix qemu startup check for QEMU_CAPS_OBJECT_IOTHREAD
https://bugzilla.redhat.com/show_bug.cgi?id=1249981

When qemuDomainPinIOThread was added in commit id 'fb562614', a check
for the IOThread capability was not needed since a check for iothreadpids
covered the condition where the support for IOThreads was not present.
The iothreadpids array was only created if qemuProcessDetectIOThreadPIDs
was able to query the monitor for IOThreads. It would only do that if
the QEMU_CAPS_OBJECT_IOTHREAD capability was set.

However, when iothreadids were added in commit id '8d4614a5' and the
check for iothreadpids was replaced by a search through the iothreadids[]
array for the matching iothread_id that left open the possibility that
an iothreadids[] array was defined, but the entries essentially pointed
to elements with only the 'iothread_id' defined leaving the 'thread_id'
value of 0 and eventually the cpumap entry of NULL.

This was because, the original IOThreads commit id '72edaae7' only
checked if IOThreads were defined and if the emulator had the IOThreads
capability, then IOThread objects were added at startup. The "capability
failure" check was only done when a disk was assigned to an IOThread in
qemuCheckIOThreads. This was because the initial implementation had no way
to dynamically add IOThreads, but it was possible to dynamically add a
disk to the domain. So the decision was if the domain supported it, then
add the IOThread objects. Then if a disk with an IOThread defined was
added, it could check the capability and fail to add if not there. This
just meant the 'iothreads' value was essentially ignored.

Eventually commit id 'a27ed6e7' allowed for the dynamic addition and
deletion of IOThread objects. So it was no longer necessary to generate
IOThread objects to dynamically attach a disk to. However, the startup
and disk check code was not modified to reflect this.

This patch will move the capability failure check to when IOThread
objects are being added to the command line. Thus a domain that has
IOThreads defined will not be started if the emulator doesn't support
the capability. This means when qemuCheckIOThreads is called to add
a disk, it's no longer necessary to check the capability. Instead the
code can use the IOThreadFind call to indicate that the IOThread
doesn't exist.

Finally because it could be possible to have a domain running with the
iothreadids[] defined prior to this change if libvirtd is restarted each
having mostly empty elements, qemuProcessDetectIOThreadPIDs will check
if there are niothreadids when the QEMU_CAPS_OBJECT_IOTHREAD capability
check fails and remove the elements and array if it exists.

With these changes in place, it turns out the cputune-numatune test
was failing because the right bit wasn't set in the test. So used the
opportunity to fix that and create a test that would expect to fail
with some sort of iothreads defined and used, but not having the
correct capability.
2015-10-16 06:55:45 -04:00
Wei Jiangang
28a72d65ca tests: make redirects happen in correct order
It should redirect stdout to /dev/null first,
then redirect stderr to whatever stdout currently points at.

Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com>
2015-10-14 13:10:38 +02:00
Michal Privoznik
79bd55b302 virSecurityManagerNew: Turn array of booleans into flags
So imagine you want to crate new security manager:

  if (!(mgr = virSecurityManagerNew("selinux", "QEMU", false, true, false, true)));

Hard to parse, right? What about this:

  if (!(mgr = virSecurityManagerNew("selinux", "QEMU",
                                    VIR_SECURITY_MANAGER_DEFAULT_CONFINED |
                                    VIR_SECURITY_MANAGER_PRIVILEGED)));

Now that's better! This is what the commit does.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-10-07 17:51:28 +02:00
Cole Robinson
a946c50ded tests: eventtest: Fix coverity warning
We can ignore the result of virtTestResult here, because failure is
unconditionally reported by the callers
2015-10-07 10:48:45 -04:00
Cole Robinson
1a83a068e4 tests: qemu: Add aarch64 virtio pci tests
- qemuxml2argv-aarch64-mmio-default-pci: Verify that we still default
  to virtio-mmio even if qemu is new enough to support PCI
- qemuxml2argv-aarch64-virtio-pci: Check generated arm virtio PCI args
2015-10-06 10:27:10 -04:00
Martin Kletzander
7d19413955 tests: Check GIC-related XMLs in qemuxml2xmltest
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-10-06 15:10:36 +02:00
Peter Krempa
51a4178f24 conf: Remove <metadata> elements with no namespace
Our docs state that subelements of <metadata> shall have a namespace
and the medatata APIs expect that too. To avoid inaccessible
<metadata> sub-elements, just remove those that don't conform to the
documentation.

Apart from adding the new condition this patch renames the function and
refactors the code flow to allow the changes.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1245525
2015-10-06 13:36:12 +02:00
Cole Robinson
bb5fc5c778 testutils: Drop virtTestResult
virtTestResult is suboptimal for a few reasons:

- It poorly duplicates virtTestRun pass/fail reporting logic
- It doesn't have virtTestRun's alloc testing support
- It only reports the test name _after_ the test has run.
- It doesn't follow the standard virtTestRun pattern that most other
  tests use.

There's no users left, so drop it. If any other async tests like eventtest
spring up that don't cleanly fit the virtTestRun pattern, I suggest they
just open code the support for it around virtTestRun
2015-10-05 14:34:04 -04:00
Cole Robinson
ae8755370f tests: eventtest: Open code virtTestResult
These event tests aren't run synchronously, so there isn't an obvious
function to pass to virtTestRun. Instead, open code roughly what
virtTestResult did before: printing an error message if a test failed.
2015-10-05 14:34:04 -04:00
Cole Robinson
64cc686d79 tests: sheepdog: Drop use of virtTestResult
Instead use the same pattern that most other test files use.
2015-10-05 14:34:04 -04:00
Cole Robinson
3de074efa5 testutils: Add coloring to verbose PASS/FAILED output
Helps to visually track down test failures if debugging the test suite.

The colors match what 'make check' does for pass/fail/skip
2015-10-05 14:34:04 -04:00
Martin Kletzander
41c2aa729f qemu: Use memory-backing-file only when needed
We are using memory-backing-file even when it's not needed, for example
if user requests hugepages for memory backing, but does not specify any
pagesize or memory node pinning.  This causes migrations to fail when
migrating from older libvirt that did not do this.  So similarly to
commit 7832fac847 which does it for
memory-backend-ram, this commit makes is more generic and
backend-agnostic, so the backend is not used if there is no specific
pagesize of hugepages requested, no nodeset the memory node should be
bound to, no memory access change required, and so on.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1266856

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-10-02 16:14:26 +02:00
Martin Kletzander
ad8ab88c91 qemu: Extract -mem-path building into its own function
That function is called qemuBuildMemPathStr() and will be used in
other places in the future.  The change in the test suite is proper due
to the fact that -mem-prealloc makes only sense with -mem-path (from
qemu documentation -- html/qemu-doc.html).

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-10-02 16:14:26 +02:00
Pavel Fedin
12a73cf14a qemu: Add test cases for gic-version option
These tests make sure that we can use this option only when the capability is
set.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
2015-10-02 16:14:26 +02:00
Shivangi Dhir
7383b8cc06 qemu: Make virtType of type virDomainVirtType
Earlier virtType was of type int. After, introducing the enum VIR_DOMAIN_VIRT_NONE,
the type of virtType is modified to virDomainVirtType.
2015-09-25 15:34:09 -04:00
Shivangi Dhir
62569e45ea conf: Add new VIR_DOMAIN_VIRT_NONE enum
Introduce VIR_DOMAIN_VIRT_NONE to give domaintype the default value of zero.
This is specially helpful in constructing better error messages
when we don't want to look up the default emulator by virtType.

The test data in vircapstest.c is also modified to reflect this change.
2015-09-25 15:33:53 -04:00
John Ferlan
a36b0ad2d5 tests: Resolve Coverity RESOURCE_LEAK
The cleanup path did not clear the reference for sk1 and sk2

Signed-off-by: John Ferlan <jferlan@redhat.com>
2015-09-24 09:53:38 -04:00
John Ferlan
6743809dbf tests: Resolve Coverity RESOURCE_LEAK
In the error path need to unref the 'caps' as well

Signed-off-by: John Ferlan <jferlan@redhat.com>
2015-09-24 09:53:38 -04:00
Peter Krempa
624ec1c2f9 qemu: Align memory module sizes to 2MiB
My original implementation was based on a qemu version that still did
not have all the checks in place. Using sizes that would align to odd
megabyte increments will produce the following error:

qemu-kvm: -device pc-dimm,node=0,memdev=memdimm0,id=dimm0: backend memory size must be multiple of 0x200000
qemu-kvm: -device pc-dimm,node=0,memdev=memdimm0,id=dimm0: Device 'pc-dimm' could not be initialized

Introduce an alignment retrieval function for memory devices and use it
to align the devices separately and modify a test case to verify it.
2015-09-23 13:54:54 +02:00
Michal Privoznik
086f37e97a tests: Avoid use of virQEMUDriverCreateXMLConf(NULL)
We use the function to create a virDomainXMLOption object that is
required for some functions. However, we don't pass the driver
pointer to the object anywhere - rather than pass NULL. This
causes trouble later when parsing a domain XML and calling post
parse callbacks:

  Program received signal SIGSEGV, Segmentation fault.
  0x000000000043fa3e in qemuDomainDefPostParse (def=0x7d36c0, caps=0x7caf10, opaque=0x0) at qemu/qemu_domain.c:1043
  1043        qemuCaps = virQEMUCapsCacheLookup(driver->qemuCapsCache, def->emulator);
  (gdb) bt
  #0  0x000000000043fa3e in qemuDomainDefPostParse (def=0x7d36c0, caps=0x7caf10, opaque=0x0) at qemu/qemu_domain.c:1043
  #1  0x00007ffff2928bf9 in virDomainDefPostParse (def=0x7d36c0, caps=0x7caf10, xmlopt=0x7c82c0) at conf/domain_conf.c:4269
  #2  0x00007ffff294de04 in virDomainDefParseXML (xml=0x7da8c0, root=0x7dab80, ctxt=0x7da980, caps=0x7caf10, xmlopt=0x7c82c0, flags=0) at conf/domain_conf.c:16400
  #3  0x00007ffff294e5b5 in virDomainDefParseNode (xml=0x7da8c0, root=0x7dab80, caps=0x7caf10, xmlopt=0x7c82c0, flags=0) at conf/domain_conf.c:16582
  #4  0x00007ffff294e424 in virDomainDefParse (xmlStr=0x0, filename=0x7c7ef0 "/home/zippy/work/libvirt/libvirt.git/tests/securityselinuxlabeldata/disks.xml", caps=0x7caf10, xmlopt=0x7c82c0, flags=0) at conf/domain_conf.c:16529
  #5  0x00007ffff294e4b2 in virDomainDefParseFile (filename=0x7c7ef0 "/home/zippy/work/libvirt/libvirt.git/tests/securityselinuxlabeldata/disks.xml", caps=0x7caf10, xmlopt=0x7c82c0, flags=0) at conf/domain_conf.c:16553
  #6  0x00000000004303ca in testSELinuxLoadDef (testname=0x53c929 "disks") at securityselinuxlabeltest.c:192
  #7  0x00000000004309e8 in testSELinuxLabeling (opaque=0x53c929) at securityselinuxlabeltest.c:313
  #8  0x0000000000431207 in virtTestRun (title=0x53c92f "Labelling \"disks\"", body=0x430964 <testSELinuxLabeling>, data=0x53c929) at testutils.c:211
  #9  0x0000000000430c5d in mymain () at securityselinuxlabeltest.c:373
  #10 0x00000000004325c2 in virtTestMain (argc=1, argv=0x7fffffffd7e8, func=0x430b4a <mymain>) at testutils.c:863
  #11 0x0000000000430deb in main (argc=1, argv=0x7fffffffd7e8) at securityselinuxlabeltest.c:381

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-09-22 17:05:16 +02:00
Michal Privoznik
b1dc59b395 qemuTestDriverInit: init the driver lock too
Even though usage of the lock is limited to a very few cases,
it's still needed. Therefore we should initialize it too.
Otherwise we may get some random test failures:

==1204== Conditional jump or move depends on uninitialised value(s)
==1204==    at 0xEF7F7CF: pthread_mutex_lock (in /lib64/libpthread-2.20.so)
==1204==    by 0x9CA89A5: virMutexLock (virthread.c:89)
==1204==    by 0x450B2A: qemuDriverLock (qemu_conf.c:83)
==1204==    by 0x45549C: virQEMUDriverGetConfig (qemu_conf.c:869)
==1204==    by 0x448E29: qemuDomainDeviceDefPostParse (qemu_domain.c:1240)
==1204==    by 0x9CC9B13: virDomainDeviceDefPostParse (domain_conf.c:4224)
==1204==    by 0x9CC9B91: virDomainDefPostParseDeviceIterator (domain_conf.c:4251)
==1204==    by 0x9CC7843: virDomainDeviceInfoIterateInternal (domain_conf.c:3440)
==1204==    by 0x9CC9C25: virDomainDefPostParse (domain_conf.c:4276)
==1204==    by 0x9CEEE03: virDomainDefParseXML (domain_conf.c:16400)
==1204==    by 0x9CEF5B4: virDomainDefParseNode (domain_conf.c:16582)
==1204==    by 0x9CEF423: virDomainDefParse (domain_conf.c:16529)

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-09-22 17:05:16 +02:00
Peter Krempa
3b2db51430 test: Add test to validate that memory sizes don't get updated on migration 2015-09-22 16:09:28 +02:00
Peter Krempa
bd874b6c42 qemu: ppc64: Align memory sizes to 256MiB blocks
For some machine types ppc64 machines now require that memory sizes are
aligned to 256MiB increments (due to the dynamically reconfigurable
memory). As now we treat existing configs reasonably in regards to
migration, we can round all the sizes unconditionally. The only drawback
will be that the memory size of a VM can potentially increase by
(256MiB - 1byte) * number_of_NUMA_nodes.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1249006
2015-09-22 16:09:28 +02:00
Peter Krempa
c7d7ba85a6 qemu: command: Align memory sizes only on fresh starts
When we are starting a qemu process for an incomming migration or
snapshot reloading we should not modify the memory sizes in the domain
since we could potentially change the guest ABI that was tediously
checked before. Additionally the function now updates the initial memory
size according to the NUMA node size, which should not happen if we are
restoring state.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1252685
2015-09-22 16:09:28 +02:00
Peter Krempa
ed94ad9e40 conf: Drop VIR_DOMAIN_DEF_PARSE_CLOCK_ADJUST flag
The flag was used only for formatting the XML and once the parser and
formatter flags were split in 0ecd685109
it doesn't make sense any more to have it.
2015-09-22 16:09:27 +02:00
Pavel Fedin
0636c4a8f6 tests: use mockup cache
Use the new API in order to correctly add capability sets to the cache
before parsing XML files

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2015-09-22 13:56:59 +02:00
Pavel Fedin
f7dd335749 Implement infrastracture for mocking up QEMU capabilities cache
The main purpose of this patch is to introduce test mode to
virQEMUCapsCacheLookup(). This is done by adding a global variable, which
effectively overrides binary name. This variable is supposed to be set by
test suite.

The second addition is qemuTestCapsCacheInsert() function which allows the
test suite to actually populate the cache.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2015-09-22 13:56:59 +02:00
Pavel Fedin
5b7bf20877 tests: split out common qemu driver initialization
Two utility functions are introduced for proper initialization and
cleanup of the driver.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2015-09-22 13:56:59 +02:00
Matthias Bolte
636a990587 vmx: Expose datacenter path in domain XML
Tool such as libguestfs need the datacenter path to get access to disk
images. The ESX driver knows the correct datacenter path, but this
information cannot be accessed using libvirt API yet. Also, it cannot
be deduced from the connection URI in a robust way.

Expose the datacenter path in the domain XML as <vmware:datacenterpath>
node similar to the way the <qemu:commandline> node works. The new node
is ignored while parsing the domain XML. In contrast to <qemu:commandline>
it is output only.
2015-09-17 11:34:54 +01:00
John Ferlan
b421a70811 virfile: Check for existence of dir in virFileDeleteTree
Commit id 'f1f68ca33' added code to remove the directory paths for
auto-generated sockets, but that code could be called before the
paths were created resulting in generating error messages from
virFileDeleteTree indicating that the file doesn't exist.

Rather than "enforce" all callers to make the non-NULL and existence
checks, modify the virFileDeleteTree API to silently ignore NULL on
input and non-existent directory trees.
2015-09-16 11:23:16 -04:00
Michal Privoznik
307fb9044c virSecurityManager: Track if running as privileged
We may want to do some decisions in drivers based on fact if we
are running as privileged user or not. Propagate this info there.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-09-15 11:30:14 +02:00
Martin Kletzander
cce83f1318 tests: Don't use testutils in mock libraries
Mock libraries are not built with testutils.c, but there's one which
uses VIR_TEST_DEBUG.  But because that debug should be an error, if we
change it, then it will not only be more semantically correct, but mingw
compiler will be happier as well.

It also follows suit with all other mock libraries.

For few other things, used in this file, need libvirt.la to be added
into LIBADD for mingw as well.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-09-11 13:34:02 +02:00
Andrea Bolognani
fedbb015a9 qemu: Introduce QEMU_CAPS_DEVICE_VIRTIO_NET
This capability can be used to detect whether or not the QEMU
binary supports the virtio-net-* network device.
2015-09-10 09:25:02 +02:00
Andrea Bolognani
fb58318d7f qemu: Introduce QEMU_CAPS_DEVICE_E1000
This capability can be used to detect whether or not the QEMU
binary supports the e1000 network device.
2015-09-10 09:25:01 +02:00
Andrea Bolognani
b8d545a8b8 qemu: Introduce QEMU_CAPS_DEVICE_RTL8139
This capability can be used to detect whether or not the QEMU
binary supports the rtl8139 network device.
2015-09-10 09:25:01 +02:00
Luyao Huang
83ae3ee39b conf: fix crash when parsing a unordered NUMA <cell/>
https://bugzilla.redhat.com/show_bug.cgi?id=1260846

Introduced by 8fedbbdb, if we parse an unordered NUMA cell, will
get a segfault. This is because of a check for overlapping @cpus
sets we have there. However, since the array to hold guest NUMA
cells is allocated upfront and therefore it contains all zeros,
an out of order cell will break our assumption that cell IDs have
increasing character. At this point we try to access yet NULL
bitmap and therefore segfault.

Signed-off-by: Luyao Huang <lhuang@redhat.com>
2015-09-08 10:40:20 +02:00
Matthias Bolte
98d8c811ce vmx: Add handling for CDROM devices with SCSI passthru
https://bugzilla.redhat.com/show_bug.cgi?id=1172544
2015-09-07 22:19:42 +02:00
Jonathan Toppins
5c668a78d8 qemu: add udp interface support
Adds a new interface type using UDP sockets, this seems only applicable
to QEMU but have edited tree-wide to support the new interface type.

The interface type required the addition of a "localaddr" (local
address), this then maps into the following xml and qemu call.

<interface type='udp'>
  <mac address='52:54:00:5c:67:56'/>
  <source address='127.0.0.1' port='11112'>
    <local address='127.0.0.1' port='22222'/>
  </source>
  <model type='virtio'/>
  <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
</interface>

QEMU call:
	-net socket,udp=127.0.0.1:11112,localaddr=127.0.0.1:22222

Notice the xml "local" entry becomes the "localaddr" for the qemu call.

reference:
http://lists.gnu.org/archive/html/qemu-devel/2011-11/msg00629.html

Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2015-09-02 10:17:50 +02:00
ik.nitk
c27553b6e2 lxc: Inherit namespace feature
This patch adds feature for lxc containers to inherit namespaces.
This is very similar to what lxc-tools or docker provides.  Look
for "man lxc-start" and you will find that you can pass command
args as [ --share-[net|ipc|uts] name|pid ]. Or check out docker
networking option in which you can give --net=container:NAME_or_ID
as an option for sharing +namespace.

>From this patch you can add extra libvirt option to share
namespace in following way.

 <lxc:namespace>
   <lxc:sharenet type='netns' value='red'/>
   <lxc:shareipc type='pid' value='12345'/>
   <lxc:shareuts type='name' value='container1'/>
 </lxc:namespace>

The netns option is specific to sharenet. It can be used to
inherit from existing network namespace.

Co-authored: Daniel P. Berrange <berrange@redhat.com>
2015-08-26 11:28:30 +01:00
Sergey Bronnikov
4076d30f85 docs: Rename 'parallels' to 'vz'
Parallels driver was renamed to Virtuozzo. Replace old name by new
one for libvirt docs and schemas.
2015-08-25 07:21:33 -04:00
intrigeri
2f01cfdf05 virt-aa-helper: allow access to /usr/share/ovmf/
We forbid access to /usr/share/, but (at least on Debian-based systems)
the Open Virtual Machine Firmware files needed for booting UEFI virtual
machines in QEMU live in /usr/share/ovmf/. Therefore, we need to add
that directory to the list of read only paths.

A similar patch was suggested by Jamie Strandboge <jamie@canonical.com>
on https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1483071.
2015-08-24 13:00:39 +02:00
Martin Kletzander
f1e927c4bf tests: Use qemuProcessPrepareMonitorChr in qemuxmlnstest
The output of that function was not tested until now.  In order to keep
the paths in /tmp, the test driver config is "fixed" as well.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-08-24 11:53:17 +02:00
Martin Kletzander
f1f68ca334 qemu: Fix access to auto-generated socket paths
We are automatically generating some socket paths for domains, but all
those paths end up in a directory that's the same for multiple domains.
The problem is that multiple domains can each run with different
seclabels (users, selinux contexts, etc.).  The idea here is to create a
per-domain directory labelled in a way that each domain can access its
own unix sockets.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146886

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-08-24 11:53:17 +02:00
Erik Skultety
4ac0d545e8 test: Replace tabs with spaces in virnetdaemondata json files
JSON data that are used to initialize tests in virnetdaemontest should
be in a consistent format, i.e. not using tabs for indentation, those
should be replaced by spaces.
2015-08-24 09:30:40 +02:00
Andrea Bolognani
7dc52241b3 tests: Add some compatibility-related cases to the CPU tests 2015-08-21 15:42:38 -07:00
Martin Kletzander
8ce86722d7 qemu: Keep numad hint after daemon restart
The numad hint stored in priv->autoNodeset is information that gets lost
during daemon restart.  And because we would like to use that
information in the future, we also need to save it in the status XML.
For the sake of tests, we need to initialize nnumaCell_max to some
value, so that the restoration doesn't fail in our test suite.  There is
no need to fill in the actual numa cell data since the recalculating
function virCapabilitiesGetCpusForNodemask() will not fail, it will just
skip filling the data in the bitmap which we don't use in tests anyway.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-08-13 15:06:06 +02:00
Martin Kletzander
1f24c1494a conf: Don't try formating non-existing addresses
Commit a6f9af8292 added checking for address colisions between
starting and ending addresses of forwarding addresses, but forgot that
there might be no addresses set at all.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-08-11 16:07:41 +02:00
Andrea Bolognani
818e68c5b4 tests: Add a bunch of cpu test case for ppc64
The test cases cover the cpuCompare(), cpuBaseline() and
cpuNodeData() implementation.
2015-08-11 15:25:28 +02:00
Andrea Bolognani
049df97504 tests: Re-enable ppc64 cpu tests
Now that all the changes have been implemented we can run the
test cases once again, after updating them to reflect the new
behaviour.
2015-08-11 15:25:28 +02:00
Andrea Bolognani
04f5a60d4b tests: Temporarily disable ppc64 cpu tests
The upcoming commits will make heavy modifications to the ppc64
driver, split so that it's easier to review the changes.

Instead of updating the test cases so that they pass, possibly
only to update them again with the following commit, disable them
for the time being.

Another commit will update them all in one go once all required
changes are in place.
2015-08-11 11:04:57 +02:00
Andrea Bolognani
96b2c7459c cpu: CPU model names have to match on ppc64
Limitations of the POWER architecture mean that you can't run
eg. a POWER7 guest on a POWER8 host when using KVM. This applies
to all guests, not just those using VIR_CPU_MATCH_STRICT in the
CPU definition; in fact, exact and strict CPU matching are
basically the same on ppc64.

This means, of course, that hosts using different CPUs have to be
considered incompatible as well.

Change ppc64Compute(), called by cpuGuestData(), to reflect this
fact and update test cases accordingly.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1250977
2015-08-11 11:04:57 +02:00
Andrea Bolognani
e5ef51a4c0 tests: Improve result handling in cpuTestGuestData()
A test is considered successful if the obtained result matches
the expected result: if that's not the case, whether because a
test that was expected to succeed failed or because a test that
was supposed to fail succeeded, then something's not right and
we want the user to know about this.

On the other hand, if a failure that's unrelated to the bits
we're testing occurs, then the user should be notified even if
the test was expected to fail.

Use different values to tell these two situations apart.

Fix a test case that was wrongly expected to fail as well.
2015-08-11 11:04:57 +02:00
Andrea Bolognani
81a925e0f9 tests: Remove unused file
No functional changes.
2015-08-11 11:04:57 +02:00
Laine Stump
a6f9af8292 network: validate network NAT range
This patch modifies virSocketAddrGetRange() to function properly when
the containing network/prefix of the address range isn't known, for
example in the case of the NAT range of a virtual network (since it is
a range of addresses on the *host*, not within the network itself). We
then take advantage of this new functionality to validate the NAT
range of a virtual network.

Extra test cases are also added to verify that virSocketAddrGetRange()
works properly in both positive and negative cases when the network
pointer is NULL.

This is the *real* fix for:

https://bugzilla.redhat.com/show_bug.cgi?id=985653

Commits 1e334a and 48e8b9 had earlier been pushed as fixes for that
bug, but I had neglected to read the report carefully, so instead of
fixing validation for the NAT range, I had fixed validation for the
DHCP range. sigh.
2015-08-10 13:06:56 -04:00
Martin Kletzander
cf0404455c qemu: Enable ioeventfd usage for virtio-scsi controllers
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1150484

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-08-10 15:05:34 +02:00
Martin Kletzander
35eecddee3 conf: Add ioeventfd option for controllers
This will be used with a virtio-scsi controller later on.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-08-10 15:05:34 +02:00
Martin Kletzander
a8743c3938 rpc: Remove keepalive_required option
Since its introduction in 2011 (particularly in commit f4324e3292),
the option doesn't work.  It just effectively disables all incoming
connections.  That's because the client private data that contain the
'keepalive_supported' boolean, are initialized to zeroes so the bool is
false and the only other place where the bool is used is when checking
whether the client supports keepalive.  Thus, according to the server,
no client supports keepalive.

Removing this instead of fixing it is better because a) apparently
nobody ever tried it since 2011 (4 years without one month) and b) we
cannot know whether the client supports keepalive until we get a ping or
pong keepalive packet.  And that won't happen until after we dispatched
the ConnectOpen call.

Another two reasons would be c) the keepalive_required was tracked on
the server level, but keepalive_supported was in private data of the
client as well as the check that was made in the remote layer, thus
making all other instances of virNetServer miss this feature unless they
all implemented it for themselves and d) we can always add it back in
case there is a request and a use-case for it.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-08-10 13:15:56 +02:00
Laine Stump
7d69387cd6 qemu: support new pci controller model "pcie-switch-downstream-port"
This is backed by the qemu device xio3130-downstream. It can only be
connected to a pcie-switch-upstream-port (x3130-upstream) on the
upstream side.
2015-08-09 22:32:00 -04:00
Laine Stump
76379a6ec1 conf: new pcie-controller model "pcie-switch-downstream-port"
This controller can be connected only to a port on a
pcie-switch-upstream-port. It provides a single hotpluggable port that
will accept any PCI or PCIe device, as well as any device requiring a
pcie-*-port (the only current example of such a device is the
pcie-switch-upstream-port).
2015-08-09 22:30:47 -04:00
Laine Stump
ad1748a1aa qemu: add capabilities bit for device xio3130-downstream
The downstream ports of an x3130-upstream switch can each have one of
these plugged into them (and that is the only place they can be
connected). Each xio3130-downstream provides a single PCIe port that
can have PCI or PCIe devices hotplugged into it. Apparently an entire
set of x3130-upstream + several xio3130-downstreams can be hotplugged
as a unit, but it's not clear to me yet how that would be done, since
qemu only allows attaching a single device at a time.

This device will be used to implement the
"pcie-switch-downstream-port" model of pci controller.
2015-08-09 22:29:25 -04:00
Laine Stump
cb99086d1b qemu: support new pci controller model "pcie-switch-upstream-port"
this is backed by the qemu device x3130-upstream. It can only plug
into a pcie-root-port or pcie-switch-downstream-port.
2015-08-09 22:16:10 -04:00
Laine Stump
38ea9515af conf: new pci controller model "pcie-switch-upstream-port"
This controller can be connected only to a pcie-root-port or a
pcie-switch-downstream-port (which will be added in a later patch),
which is the reason for the new connect type
VIR_PCI_CONNECT_TYPE_PCIE_PORT. A pcie-switch-upstream-port provides
32 ports (slot=0 to slot=31) on the downstream side, which can only
have pci controllers of model "pcie-switch-downstream-port" plugged
into them, which is the reason for the other new connect type
VIR_PCI_CONNECT_TYPE_PCIE_SWITCH.
2015-08-09 22:12:29 -04:00
Laine Stump
4cde758808 qemu: add capabilities bit for device x3130-upstream
This is the upstream part of a PCIe switch. It connects to a PCIe port
(but not PCI) on the upstream side, and can have up to 31
xio3130-downstream controllers (but no other types of devices)
connected to its downstream side.

This device will be used to implement the "pcie-switch-upstream-port"
model of pci controller.
2015-08-09 22:02:16 -04:00
Laine Stump
16328520f6 qemu: support new pci controller model "pcie-root-port"
This is backed by the qemu device ioh3420.

chassis and port from the <target> subelement are used to store/set the
respective qemu device options for the ioh3420. Currently, chassis is
set to be the index of the controller, and port is set to
"(slot << 3) + function" (per suggestion from Alex Williamson).
2015-08-09 21:58:55 -04:00
Laine Stump
dce3b8beb3 conf: new pci controller model "pcie-root-port"
This controller can be connected (at domain startup time only - not
hotpluggable) only to a port on the pcie root complex ("pcie-root" in
libvirt config), hence the new connect type
VIR_PCI_CONNECT_TYPE_PCIE_ROOT. It provides a hotpluggable port that
will accept any PCI or PCIe device.

New attributes must be added to the controller <target> subelement for
this - chassis and port are guest-visible option values that will be
set by libvirt with values derived from the controller's index and pci
address information.
2015-08-09 21:52:52 -04:00
Laine Stump
408b100a06 qemu: add capabilities bit for device ioh3420
This is a PCIE "root port". It connects only to a port of the
integrated pcie.0 bus of a Q35 machine (can't be hotplugged), and
provides a single PCIe port that can have PCI or PCIe devices
hotplugged into it.

This device will be used to implement the "pcie-root-port" model of
pci controller.
2015-08-09 21:44:11 -04:00
Laine Stump
18c104516e qemu: implement <target chassisNr='n'/> subelement/attribute of <controller>
This uses the new subelement/attribute in two ways:

1) If a "pci-bridge" pci controller has no chassisNr attribute, it
will automatically be set to the controller's index as soon as the
controller's PCI address is known (during
qemuDomainAssignPCIAddresses()).

2) when creating the commandline for a pci-bridge device, chassisNr
will be used to set qemu's chassis_nr option (rather than the previous
practice of hard-coding it to the controller's index).
2015-08-09 21:40:40 -04:00
Laine Stump
8dc88aeed6 conf: add new <target> subelement with chassisNr attribute to <controller>
There are some configuration options to some types of pci controllers
that are currently automatically derived from other parts of the
controller's configuration. For example, in qemu a pci-bridge
controller has an option that is called "chassis_nr"; up until now
libvirt has always set chassis_nr to the index of the pci-bridge. So
this:

  <controller type='pci' model='pci-bridge' index='2'/>

will always result in:

  -device pci-bridge,chassis_nr=2,...

on the qemu commandline. In the future we may decide there is a better
way to derive that option, but even in that case we will need for
existing domains to retain the same chassis_nr they were using in the
past - that is something that is visible to the guest so it is part of
the guest ABI and changing it would lead to problems for migrating
guests (or just guests with very picky OSes).

The <target> subelement has been added as a place to put the new
"chassisNr" attribute that will be filled in by libvirt when it
auto-generates the chassisNr; it will be saved in the config, then
reused any time the domain is started:

  <controller type='pci' model='pci-bridge' index='2'>
    <model type='pci-bridge'/>
    <target chassisNr='2'/>
  </controller>

The one oddity of all this is that if the controller configuration
is changed (for example to change the index or the pci address
where the controller is plugged in), the items in <target> will
*not* be re-generated, which might lead to conflict. I can't
really see any way around this, but fortunately if there is a
material conflict qemu will let us know and we will pass that on
to the user.
2015-08-09 21:35:00 -04:00
Laine Stump
bf20251048 conf: add new <model> subelement with name attribute to <controller>
This new subelement is used in PCI controllers: the toplevel
*attribute* "model" of a controller denotes what kind of PCI
controller is being described, e.g. a "dmi-to-pci-bridge",
"pci-bridge", or "pci-root". But in the future there will be different
implementations of some of those types of PCI controllers, which
behave similarly from libvirt's point of view (and so should have the
same model), but use a different device in qemu (and present
themselves as a different piece of hardware in the guest). In an ideal
world we (i.e. "I") would have thought of that back when the pci
controllers were added, and used some sort of type/class/model
notation (where class was used in the way we are now using model, and
model was used for the actual manufacturer's model number of a
particular family of PCI controller), but that opportunity is long
past, so as an alternative, this patch allows selecting a particular
implementation of a pci controller with the "name" attribute of the
<model> subelement, e.g.:

  <controller type='pci' model='dmi-to-pci-bridge' index='1'>
    <model name='i82801b11-bridge'/>
  </controller>

In this case, "dmi-to-pci-bridge" is the kind of controller (one that
has a single PCIe port upstream, and 32 standard PCI ports downstream,
which are not hotpluggable), and the qemu device to be used to
implement this kind of controller is named "i82801b11-bridge".

Implementing the above now will allow us in the future to add a new
kind of dmi-to-pci-bridge that doesn't use qemu's i82801b11-bridge
device, but instead uses something else (which doesn't yet exist, but
qemu people have been discussing it), all without breaking existing
configs.

(note that for the existing "pci-bridge" type of PCI controller, both
the model attribute and <model> name are 'pci-bridge'. This is just a
coincidence, since it turns out that in this case the device name in
qemu really is a generic 'pci-bridge' rather than being the name of
some real-world chip)
2015-08-09 21:29:27 -04:00
Laine Stump
f8fe8f0345 conf: more useful error message when pci function is out of range
If a pci address had a function number out of range, the error message
would be:

  Insufficient specification for PCI address

which is logged by virDevicePCIAddressParseXML() after
virDevicePCIAddressIsValid returns a failure.

This patch enhances virDevicePCIAddressIsValid() to optionally report
the error itself (since it is the place that decides which part of the
address is "invalid"), and uses that feature when calling from
virDevicePCIAddressParseXML(), so that the error will be more useful,
e.g.:

  Invalid PCI address function=0x8, must be <= 7

Previously, virDevicePCIAddressIsValid didn't check for the
theoretical limits of domain or bus, only for slot or function. While
adding log messages, we also correct that ommission. (The RNG for PCI
addresses already enforces this limit, which by the way means that we
can't add any negative tests for this - as far as I know our
domainschematest has no provisions for passing XML that is supposed to
fail).

Note that virDevicePCIAddressIsValid() can only check against the
absolute maximum attribute values for *any* possible PCI controller,
not for the actual maximums of the specific controller that this
device is attaching to; fortunately there is later more specific
validation for guest-side PCI addresses when building the set of
assigned PCI addresses. For host-side PCI addresses (e.g. for
<hostdev> and for network device pools), we rely on the error that
will be logged when it is found that the device doesn't actually
exist.

This resolves:

  https://bugzilla.redhat.com/show_bug.cgi?id=1004596
2015-08-08 18:37:35 -04:00
Daniel P. Berrange
3433180ec8 tests: extend workaround for gnutls private key loading failure
In gnutls 3.4.3 there is a regression in the loading of private
keys via gnutls_x509_privkey_import. We already have a workaround
to deal with failures on older gnutls, but the error code that
the new gnutls returns is different. Extend the workaround so that
is checks for GNUTLS_E_REQUESTED_DATA_NOT_AVAILABLE too.

See also gnutls https://bugzilla.redhat.com/show_bug.cgi?id=1250020

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-08-04 12:28:24 +01:00
Kothapally Madhu Pavan
d9557572ae Avoid starting a PowerPC VM with floppy disk
PowerPC pseries based VMs do not support a floppy disk controller.
This prohibits libvirt from creating qemu command with floppy device.

Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1180486

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2015-08-04 10:17:07 +02:00
Andrea Bolognani
b7102e9031 tests: Add subcores3 nodeinfo test
This makes sure the subcore-unaware CPU counting logic is used
whenever the configuration is invalid.
2015-08-03 08:38:47 -04:00
Andrea Bolognani
28616e8e70 tests: Add subcores2 nodeinfo test
This makes sure CPUs are counted correctly when some of the cores are
completely offline.
2015-08-03 08:38:47 -04:00
Andrea Bolognani
ad43a09cba tests: Add subcores1 nodeinfo test
This makes sure CPUs are counted correctly when using the default
configuration, that is, all primary threads are online and all
secondary threads are offline.
2015-08-03 08:38:47 -04:00
Shivaprasad G Bhat
3020f550ca tests: Prepare for subcore tests
The nodeGetThreadsPerSubcore() function is mocked to return 8 for
ppc64 tests, which corresponds to the default subcore mode.

Update the expected output for the deconfigured-cpus nodeinfo
test to account for this change.

Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
2015-08-03 08:38:46 -04:00
Martin Kletzander
54965743e2 tests: Finish rename of the long nodeinfo test case
Commit 2094d01e2f forgot to rename two
more files.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-07-27 08:22:24 +02:00
Daniel Veillard
2094d01e2f Renamed deconfigured-cpus to allow make dist
Simplest was just to rename that extra long name and move files in git
accordingly
2015-07-27 10:17:05 +08:00
Chris J Arges
be6c35e4ac tests: add vol-qcow2-zerocapacity test to storagevolxml2argvtest
Add a testcase for the previous change to ensure zero capacity volumes can be
defined without a backing store.

Signed-off-by: Chris J Arges <chris.j.arges@canonical.com>
2015-07-24 11:23:45 -04:00
Martin Kletzander
a5bdb8459a Revert "qemu: Use heads parameter for QXL driver"
This reverts commit 7b401c3bda.

Until libvirt is able to differentiate whether heads='1' is just a
leftover from previous libvirt or whether that's added by user on
purpose and also whether the domain was started with the support for
qxl's max_outputs, we cannot incorporate this patch into the tree
due to compatibility reasons.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-07-24 13:06:47 +02:00
Luyao Huang
b70b5ff41a test: introduce a function in test driver to check get vcpupin info
As there is a regression in use vcpupin get info, introduce a new function
to test the virsh client.

Signed-off-by: Luyao Huang <lhuang@redhat.com>
2015-07-24 06:49:54 -04:00
Roman Bogorodskiy
6cb9ef1bab bhyve: add UTC clock support
Bhyve as of r279225 (FreeBSD -CURRENT) or r284894 (FreeBSD 10-STABLE)
supports using UTC time offset via the '-u' argument to bhyve(8). By
default it's still using localtime.

Make the bhyve driver use UTC clock if it's requested by specifying
<clock offset='utc'> in domain XML and if the bhyve(8) binary supports
the '-u' flag.
2015-07-22 19:05:09 +03:00
Andrea Bolognani
cc3d52eb2f tests: Restore links in deconfigured-cpus nodeinfo test
When cleaning up the data (taken from a running system) for inclusion
I went a little too far and deleted a bunch of links that should have
been left alone. The test worked despite this because it was going
through a fallback code path.

A few other files are affected as well: again, the data is taken from
a running system, so even thought we would probably be okay if we
just added the links, aligning everything is definitely safer.
2015-07-22 09:57:57 +02:00
Peter Krempa
88f6c007c3 cgroup: Drop resource partition from virSystemdMakeScopeName
The scope name, even according to our docs is
"machine-$DRIVER\x2d$VMNAME.scope" virSystemdMakeScopeName would use the
resource partition name instead of "machine-" if it was specified thus
creating invalid scope paths.

This makes libvirt drop cgroups for a VM that uses custom resource
partition upon reconnecting since the detected scope name would not
match the expected name generated by virSystemdMakeScopeName.

The error is exposed by the following log entry:

debug : virCgroupValidateMachineGroup:302 : Name 'machine-qemu\x2dtestvm.scope' for controller 'cpu' does not match 'testvm', 'testvm.libvirt-qemu' or 'machine-test-qemu\x2dtestvm.scope'

for a "/machine/test" resource and "testvm" vm.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1238570
2015-07-22 07:12:56 +02:00
Moshe Levi
ac3ed2085f nodedev: add RDMA and tx-udp_tnl-segmentation NIC capabilities
Adding functionality to libvirt that will allow
it query the interface for the availability of RDMA and
tx-udp_tnl-segmentation Offloading NIC capabilities

Here is an example of the feature XML definition:

<device>
<name>net_eth4_90_e2_ba_5e_a5_45</name>
  <path>/sys/devices/pci0000:00/0000:00:03.0/0000:08:00.1/net/eth4</path>
  <parent>pci_0000_08_00_1</parent>
  <capability type='net'>
    <interface>eth4</interface>
    <address>90:e2:ba:5e:a5:45</address>
    <link speed='10000' state='up'/>
    <feature name='rx'/>
    <feature name='tx'/>
    <feature name='sg'/>
    <feature name='tso'/>
    <feature name='gso'/>
    <feature name='gro'/>
    <feature name='rxvlan'/>
    <feature name='txvlan'/>
    <feature name='rxhash'/>
    <feature name='rdma'/>
    <feature name='txudptnl'/>
    <capability type='80203'/>
  </capability>
</device>
2015-07-21 07:08:35 -04:00
Frediano Ziglio
7b401c3bda qemu: Use heads parameter for QXL driver
Allows to specify maximum number of head to QXL driver.

Actually can be a compatiblity problem as heads in the XML configuration
was set by default to '1'.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
2015-07-20 10:35:18 +02:00
Boris Fiuczynski
35e3fb50ee qemu: Test for virtio-9p-ccw support
This patch adds a test for the qemu command line generation.

Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@us.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
2015-07-15 14:37:30 +02:00
Andrea Bolognani
75f6f54546 nodeinfo: Make sysfs_prefix usage more consistent
Make sure sysfs_prefix, when present, is always the first argument
to a function; don't use a different name to refer to it; check
whether it is NULL, and hence SYSFS_SYSTEM_PATH should be used, only
when using it directly and not just passing it down to another
function; always pass down the same value we've been passed when
calling another function.
2015-07-14 17:11:36 -04:00
Andrea Bolognani
f8b784a8ef tests: Add nodeinfo test for non-present CPUs
Some of the possible CPUs in a system might not be present, eg. they
might be defective or might have been deconfigured from the ASM console
in a Power system. Due to this fact, Linux keeps track of what CPUs are
possible and what are present separately.

This test uses the data from a system where not all the possible CPUs
are present to make sure libvirt handles this situation correctly.
2015-07-13 16:07:44 -04:00
John Ferlan
f1a43a0f91 nodeinfo: Add sysfs_prefix to nodeGetCPUCount
Add the sysfs_prefix argument to the call to allow for setting the
path for tests to something other than SYSFS_SYSTEM_PATH.
2015-07-13 15:59:32 -04:00
Cédric Bosdonnat
24f3c2f7e0 virt-aa-helper: add DomainGuest to mockup caps
With commit 3f9868a virt-aa-helper stopped working due to missing
DomainGuest in the caps.

The test with -c without arch also needs to be
removed since the new capabilities code uses the host arch when none is
provided.
2015-07-10 11:30:36 +02:00
John Ferlan
2e09729b1c conf: Don't allow duplicated target names regardless of bus
https://bugzilla.redhat.com/show_bug.cgi?id=1142631

Commit id 'e0e290552' added a check to determine if the same bus
had the same target value.  It seems that's not quite good enough
as the check should check the target name value regardless of bus type.

Also added a DO_TEST_DIFFERENT to exhibit the issue
2015-07-09 08:30:02 -04:00
Luyao Huang
955d9bb8d0 qemu: report error when shmem has an invalid address
If user passes an invalid address for shared memory device to qemu,
neither libvirt nor qemu will report an error, but qemu will auto assign
a pci address to the shared memory device.

Signed-off-by: Luyao Huang <lhuang@redhat.com>
2015-07-08 16:30:42 +02:00
Luyao Huang
e9401342e1 qemu: Assign IDs for shared memory devices
Signed-off-by: Luyao Huang <lhuang@redhat.com>
2015-07-08 16:30:42 +02:00
Luyao Huang
e309ea6658 qemu: Auto assign pci addresses for shared memory devices
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1165029

Signed-off-by: Luyao Huang <lhuang@redhat.com>
2015-07-08 16:30:42 +02:00
Ján Tomko
4edf01c92c Explicitly format the isa-fdc controller for newer q35 machines
Since QEMU commit ea96bc6 [1]:
i386: drop FDC in pc-q35-2.4+ if neither it nor floppy drives are wanted
the floppy controller is no longer implicit.

Specify it explicitly on the command line if the machine type version
is 2.4 or later.

Note that libvirt's floppy drives do not result in QEMU implying the
controller, because libvirt uses if=none instead of if=floppy.

https://bugzilla.redhat.com/show_bug.cgi?id=1227880

[1] http://git.qemu.org/?p=qemu.git;a=commitdiff;h=ea96bc6
2015-07-08 15:35:35 +02:00
Jiri Denemark
ffbafd4e88 qemu: Avoid using ".(null)" in UNIX socket path
The code which generates paths for UNIX socket blindly used target name
without checking if it was set. Thus for the following device XML

    <channel type='unix'>
      <source mode='bind'/>
      <target type='virtio'/>
    </channel>

we would generate "/var/lib/libvirt/qemu/channel/target/NAME.(null)"
path which works but is not really correct. Let's not use the
".target_name" suffix at all if target name is not set.

https://bugzilla.redhat.com/show_bug.cgi?id=1226854

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2015-07-01 09:47:32 +02:00
John Ferlan
c79ebf53b5 conf: Validate disk lun using correct types
https://bugzilla.redhat.com/show_bug.cgi?id=1201143

The formatdomain.html description for <disk> device 'lun' indicates that
it must be either a type 'block' or type 'network' with protocol 'iscsi';
however, we did not make that check until domain startup.

This caused issues for virt-manager which had an unexpected failure at
run time rather config time.

This patch adds a check in post part disk device checking for the specific
and supported lun types as well as adjusting the test failure to be for
parse config rather than run time.
2015-06-30 08:39:32 -04:00
Jiri Denemark
365b454ed9 qemu: Fix assignment of the default spicevmc channel name
Make sure we only assign the default spicevmc channel name to spicevmc
virtio channels. Caused by commits 3269ee65 and 1133ee2b, which moved
the assignment from XML parsing code to QEMU but failed to keep the
logic.

https://bugzilla.redhat.com/show_bug.cgi?id=1179680

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2015-06-30 10:31:29 +02:00
Jiri Denemark
528e70a29a qemuxml2argv: Remove Haswell CPU from unrelated tests
Proper Haswell CPU model handling is tested in several
qemuxml2argv-cpu-* which are run in a special environment. Let's remove
the CPU model from other tests to make them less fragile.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2015-06-29 13:28:20 +02:00
Peter Krempa
1c5e782caa test: qemu: Make sure that wr_highest_offset_valid gets set properly
Remove one instance of the field being present so that the code that
sets that flag can be tested.
2015-06-26 16:41:24 +02:00
Peter Krempa
78aefb5275 qemu: monitor: Remove qemuMonitorGetBlockExtent
Now that qemuMonitorGetAllBlockStatsInfo collects also wr_highest_offset
the whole function can be killed.
2015-06-26 16:41:24 +02:00
Peter Krempa
0d130a011c qemu: monitor: Open-code retrieval of wr_highest_offset
Instead of using qemuMonitorJSONDevGetBlockExtent (which I plan to
remove later) extract the data in place.

Additionally add a flag that will be set when the wr_highest_offset was
extracted correctly so that callers can act according to that.

The test case addition should help make sure that everything works.
2015-06-26 16:41:24 +02:00
Michal Privoznik
70d75ffc79 qemuBuildMemoryBackendStr: Honour passed @pagesize
So far the argument has not much meaning and was practically ignored.
This is not good since when doing memory hotplug, the size of desired
hugepage backing is passed in that argument. Taking closer look at the
tests I'm fixing reveals the bug. For instance, while the following is
in the test:

    <memory model='dimm'>
      <source>
        <nodemask>1-3</nodemask>
        <pagesize unit='KiB'>4096</pagesize>
      </source>
      <target>
        <size unit='KiB'>524287</size>
        <node>0</node>
      </target>
      <address type='dimm' slot='0' base='0x100000000'/>
    </memory>

the generated commandline corresponding to this XML was:

    -object memory-backend-ram,id=memdimm0,size=536870912,\
    host-nodes=1-3,policy=bind

Have you noticed? Yes, memory-backend-ram! Nothing can be further away
from the right answer. The hugepage backing is requested in the XML
and we happily ignore it. This is just not right. It's
memory-backend-file which should have been used:

    -object memory-backend-file,id=memdimm0,prealloc=yes,\
    mem-path=/dev/hugepages4M/libvirt/qemu,size=536870912,\
    host-nodes=1-3,policy=bind

The problem is, that @pagesize passed to qemuBuildMemoryBackendStr
(where this part of commandline is built) was ignored. The hugepage to
back memory was searched only and only by NUMA nodes pinning. This
works only for regular guest NUMA nodes.

Then, I'm changing the hugepages size in the test XMLs too. This is
simply because in the test suite we create dummy mount points just for
2M and 1G hugepages. And in the test 4M was requested. I'm sticking to
2M, but 1G should just work too.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-06-26 09:23:06 +02:00
Michal Privoznik
f8e9deb1d4 qemuBuildMemoryBackendStr: Fix hugepages lookup process
https://bugzilla.redhat.com/show_bug.cgi?id=1196644

This function constructs the backend (host facing) part of the
memory device.  At the beginning, the configured hugepages are
searched to find the best match for given guest NUMA node.
Configured hugepages can have a @nodeset attribute to specify on
which guest NUMA nodes should be the hugepages backing used.
There is, however, one 'corner case'. Users may just tell 'use
hugepages to back all the nodes'. In other words:

  <memoryBacking>
    <hugepages/>
  </memoryBacking>

  <cpu>
    <numa>
      <cell id='0' cpus='0-1' memory='1024000' unit='KiB'/>
    </numa>
  </cpu>

Our code fails in this case. Well, since there's no @nodeset (nor
any <page/> child element to <hugepages/>) we fail to lookup the
default hugepage size to use.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-06-26 09:15:26 +02:00
Luyao Huang
786539d6bf conf: Format scheduler priority when it is zero
https://bugzilla.redhat.com/show_bug.cgi?id=1235116

According to our XML definition, zero is as valid as any other value.
Mainly because it should be kernel-agnostic.

Signed-off-by: Luyao Huang <lhuang@redhat.com>
2015-06-25 23:25:30 +02:00
Eric Blake
cb005533ab json: enhance parser test
We already enable the parser option to detect invalid UTF-8, but
didn't test it.  Also, JSON states that behavior of an object
with a duplicated key is undefined; we chose to reject it, but
were not testing it.

With the enhanced tests in place, we can simplify yajl2
initialization by relying on parser defaults being sane.

* src/util/virjson.c (virJSONValueFromString): Simplify.
* tests/jsontest.c (mymain): Test more bad usage.

Signed-off-by: Eric Blake <eblake@redhat.com>
2015-06-25 09:11:15 +02:00
Eric Blake
7e191fd939 json: even stricter trailing garbage detection
Since older yajl ignores trailing garbage, a client can cause
problems by intentionally ending the wrapper array early. Since
we already track nesting, it's not too much harder to reject
invalid nesting pops.

* src/util/virjson. (_virJSONParser): Add field.
(virJSONValueFromString): Set witness.
(virJSONParserHandleEndArray): Use it to catch abuse.
* tests/jsontest.c (mymain): Test it.

Signed-off-by: Eric Blake <eblake@redhat.com>
2015-06-25 09:11:15 +02:00
Eric Blake
7cd991b74c json: reject trailing garbage
Yajl 2 has a nice feature that it can be configured whether to
allow multiple JSON objects parsed from a single stream, defaulting
to off.  And yajl 1.0.12 at least provided a way to tell if all
input bytes were parsed, or if trailing bytes remained after a
valid JSON object was parsed.  But we target RHEL 6 yajl 1.0.7,
which has neither of these.  So fake it by always parsing '[...]'
instead, so that trailing garbage either trips up the array parse,
or is easily detected when unwrapping the result.

* src/util/virjson.c (virJSONValueFromString): With older json,
wrap text to avoid trailing garbage.
* tests/jsontest.c (mymain): Add tests for this.

Signed-off-by: Eric Blake <eblake@redhat.com>
2015-06-25 09:11:15 +02:00
Eric Blake
54dbba5bc3 json: reject javascript comments
We have been allowing javascript style comments in JSON ever
since commit 9428f2c (v0.7.5), but qemu doesn't send them, and
they are not strict JSON.  Reject them for now; if we can later
prove that it is worthwhile, we can reinstate it at that point
(or even make it conditional, by adding a bool parameter to
the libvirt entry point).

* src/util/virjson.c (virJSONValueFromString): Don't enable
comment parsing.
* tests/jsontest.c (mymain): Test it.

Signed-off-by: Eric Blake <eblake@redhat.com>
2015-06-25 09:11:15 +02:00
Eric Blake
f2acaebd40 json: cope with older yajl semantics
Commit ceb496e5 fails on RHEL 6, with yajl 1.0.7, because that
version of yajl returns yajl_status_insufficient_data when the
parser is waiting for the rest of a token (this enum value was
dropped in yajl 2, so we have to wrap it).  It also exposes a
problem where older yajl silently ignores trailing garbage after
a successful parse, so this patch works around that by changing
the testsuite.  Another more invasive patch can add tighter
semantics to json parsing, but this is sufficient for a minimal
clean backport.

While touching this, fix up our error message cleanup. Yajl
documents that error messages produced by yajl_get_error()
MUST be cleaned with yajl_free_error(); this is certainly
true if we were to pass non-NULL allocator callbacks during
yajl_alloc(), but probably harmless in our usage of passing
NULL.  But better safe than sorry.

* src/util/virjson.c (virJSONValueFromString): Allow different
error code.  Use canonical cleanup of error message.
(VIR_YAJL_STATUS_OK): New helper macro.
* tests/jsontest.c (mymain): Wrap text to avoid difference in
trailing garbage handling

Signed-off-by: Eric Blake <eblake@redhat.com>
2015-06-25 09:11:15 +02:00
Boris Fiuczynski
366e31a6ef Test for the new watchdog model diag288
Adding a test for the new watchdog model diag288.

Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
2015-06-24 15:26:32 +02:00
Boris Fiuczynski
4fda44940b Test for the new watchdog action inject-nmi
Adding a test for the new watchdog action "inject-nmi".

Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
2015-06-24 15:26:31 +02:00
Michal Privoznik
82285d5290 vircapstest: Properly report error for failed tests
There are two macros used in the test: CAPSCOMP and CAPS_EXPECT_ERR.
Both run a test case and if a failure occurred, they set the @ret
variable to a value of -1 to indicate an error. Well, that's what they
should do. Due to a typo, they set the variable to a positive one
effectively masking any failed test.

Then, we have couple of tests failing. Fix them too.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-06-24 13:47:05 +02:00
Eric Farman
c733e97323 docs: Fix XML schema handling of LUN address in hostdev tag
Defining a domain with a SCSI disk attached via a hostdev
tag and a source address unit value longer than two digits
causes an error when editing the domain with virsh edit,
even if no changes are made to the domain definition.
The error suggests invalid XML, somewhere:

  # virsh edit lmb_guest
  error: XML document failed to validate against schema:
  Unable to validate doc against /usr/local/share/libvirt/schemas/domain.rng
  Extra element devices in interleave
  Element domain failed to validate content

The virt-xml-validate tool fails with a similar error:

  # virt-xml-validate lmb_guest.xml
  Relax-NG validity error : Extra element devices in interleave
  lmb_guest.xml:17: element devices: Relax-NG validity error :
  Element domain failed to validate content
  lmb_guest.xml fails to validate

The hostdev tag requires a source address to be specified,
which includes bus, target, and unit address attributes.
According to the SCSI Architecture Model spec (section
4.9 of SAM-2), a LUN address is 64 bits and thus could be
up to 20 decimal digits long.  Unfortunately, the XML
schema limits this string to just two digits.  Similarly,
the target field can be up to 32 bits in length, which
would be 10 decimal digits.

  # lsscsi -xx
  [0:0:19:0x4022401100000000]  disk    IBM      2107900          3.44 /dev/sda
  # lsscsi
  [0:0:19:1074872354]disk    IBM      2107900          3.44  /dev/sda
  # cat lmb_guest.xml
  <domain type='kvm'>
    <name>lmb_guest</name>
    <memory unit='MiB'>1024</memory>
  ...trimmed...
    <devices>
      <controller type='scsi' model='virtio-scsi' index='0'/>
      <hostdev mode='subsystem' type='scsi'>
        <source>
          <adapter name='scsi_host0'/>
          <address bus='0' target='19' unit='1074872354'/>
        </source>
      </hostdev>
  ...trimmed...

Since the reference unit and target fields are used in
several places in the XML schema, create a separate one
specific for SCSI Logical Units that will permit the
greater length.  This permits both the validation utility
and the virsh edit command to succeed when a hostdev
tag is included.

Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
2015-06-22 16:15:49 -04:00
Eric Farman
22b8a61756 Convert SCSI logical unit from unsigned int to unsigned long long
The SCSI Architecture Model defines a logical unit address
as 64-bits in length, so change the field accordingly so
that the entire value could be stored.

Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
2015-06-22 16:03:33 -04:00
Eric Blake
58fd670335 json: make it easier to type-check when getting from object
While working in qemu_monitor_json, I repeatedly found myself
getting a value then checking if it was an object.  Add some
wrappers to make this task easier.

* src/util/virjson.c (virJSONValueObjectGetByType)
(virJSONValueObjectGetObject, virJSONValueObjectGetArray): New
functions.
(virJSONValueObjectGetString, virJSONValueObjectGetNumberInt)
(virJSONValueObjectGetNumberUint)
(virJSONValueObjectGetNumberLong)
(virJSONValueObjectGetNumberUlong)
(virJSONValueObjectGetNumberDouble)
(virJSONValueObjectGetBoolean): Simplify.
(virJSONValueIsNull): Change return type.
* src/util/virjson.h: Reflect changes.
* src/libvirt_private.syms (virjson.h): Export them.
* tests/jsontest.c (testJSONLookup): New test.

Signed-off-by: Eric Blake <eblake@redhat.com>
2015-06-22 10:38:21 -06:00
Eric Blake
ceb496e5f0 json: fully parse input string
I was adding a JSON test, and was shocked to find out our parser
treated the input string of "1" as invalid JSON.  It turns out
that YAJL specifically documents that it buffers input, and that
if the last input read could be a prefix to a longer token, then
you have to explicitly tell the parser that the buffer has ended
before that token will be processed.

It doesn't help that yajl 2 renamed the function from what it was
in yajl 1.

* src/util/virjson.c (virJSONValueFromString): Complete parse, in
case buffer ends in possible token prefix.
* tests/jsontest.c (mymain): Expose the problem.

Signed-off-by: Eric Blake <eblake@redhat.com>
2015-06-22 10:38:21 -06:00
Jiri Denemark
2ad46e5b0e qemu: Do not poll for spice migration status
QEMU_CAPS_SEAMLESS_MIGRATION capability says QEMU supports
SPICE_MIGRATE_COMPLETED event. Thus we can just drop all code which
polls query-spice and replace it with waiting for the event.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2015-06-19 15:15:11 +02:00
Pavel Boldin
5eb03b6ea0 util: add virTypedParamsAddStringList
The `virTypedParamsAddStringList' function provides interface to add a
NULL-terminated array of string values as a multi-value to the params.

Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-06-18 16:46:09 +02:00
Pavel Boldin
952907f540 util: virTypedParams{Filter,GetStringList}
Add multikey API:

 * virTypedParamsFilter that filters all the parameters with specified name.
 * virTypedParamsGetStringList that returns a list with all the values for
   specified name and string type.

Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-06-18 16:46:09 +02:00
Pavel Boldin
a5250449de util: multi-value virTypedParameter
The `virTypedParamsValidate' function now can be instructed to allow
multiple entries for some of the keys. For this flag the type with
the `VIR_TYPED_PARAM_MULTIPLE' flag.

Add unit tests for this new behaviour.

Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-06-18 16:46:09 +02:00
Peter Krempa
0b416434f8 qemu: 'privileged' flag is not really configuration
The privileged flag will not change while the configuration might
change. Make the 'privileged' flag member of the driver again and mark
it immutable. Should that ever change add an accessor that will group
reads of the state.
2015-06-18 15:13:45 +02:00
James Cowgill
f486bb0494 qemu: implement address for isa-serial
I needed to specify the iobase address for certain exotic mips configurations.

Signed-off-by: James Cowgill <james410@cowgill.org.uk>
2015-06-18 08:17:20 -04:00
Michal Privoznik
a9a27e602c virSysinfo: Introduce SMBIOS type 2 support
https://bugzilla.redhat.com/show_bug.cgi?id=1220527

This type of information defines attributes of a system
baseboard. With one exception: board type is yet not implemented
in qemu so it's not introduced here either.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-06-18 10:10:26 +02:00
Michal Privoznik
7690a5a838 tests: Sort EXTRA_DIST in the Makefile
We tend to keep the folders in the EXTRA_DIST sorted alphabetically.
However, we've failed sometimes and the list is not ordered anymore.
Reorder it back.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-06-18 09:37:26 +02:00
Michal Privoznik
992ae99d9e tests: Follow virnetserver to virnetdaemon transition
In a474611458 the virnetserver test was renamed to virnetdaemon.
Moreover, as the test relies on some data stored under
virnetserverdata/ the folder was renamed too. But this was not
reflected in the Makefile. Therefore when building outside of the
repository, the data folder was not distributed and test failed.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-06-17 14:22:23 +02:00
Martin Kletzander
beb0eda2e3 Add configuration options for permissions on daemon's admin socket
This is not going to be very widely used, but for some corner cases and
easier (unsafe) debugging, it might be nice.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-06-16 13:46:21 +02:00
Martin Kletzander
a474611458 tests: Adapt virnetservertest to daemon refactor
Rename the test to virnetdaemontest and use virNetDaemon objects instead
of virNetServer inside.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-06-16 13:46:20 +02:00
John Ferlan
38c9494878 storage: Fix the schema and add tests for cifs pool
Commit id '887dd362' added support for a netfs pool format type 'cifs'
and 'gluster' in order to add rng support for Samba and glusterfs netfs
pools. Originally, the CIFS type support was added as part of commit
id '61fb6979'. Eventually commit id 'b325be12' fixed the gluster rng
definition to match expectations.

As it turns out the CIFS rng needed a similar change since the directory
path is not an absDirPath, rather just a dirPath will be required.
2015-06-15 17:25:33 -04:00
Martin Kletzander
38788a3209 tests: Use libvirt properly with initialization and error dispatching
We were using "complicated" error printing in virnetservertest even
though we could've just dispatched the error.  Also add some good
practices that might come in handy (the code may fail without proper
initialization and event loop).

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-06-15 17:13:00 +02:00
Martin Kletzander
73ad20e936 Generate JSON with mDNS entries only when built --with-avahi
One string was already used only if that condition was true, second one
is added now.  Both are used in a nicer way.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-06-15 17:13:00 +02:00
Ján Tomko
243bbcc5db qemu caps: spell queue 2015-06-15 13:32:44 +02:00
Michal Privoznik
a377408f0b tests: Distribute virnetserverdata
Fairly recently we've introduced virnetservertest. This test has some
input data stored under tests/virnetserverdata which unfortunately was
not distributed among with the test. Therefore 'make distcheck'
failed. Fix this by adding the directory into EXTRA_DIST.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-06-12 09:48:04 +02:00