Since this tests inactive/config XML files rename it accordingly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't special-case qemuxml2argvtest's handling of timeout but rather
allow each test array entry to have it's own.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is an intermediate step to merge qemuxml2xmltest into this common
helper. This eliminates double setup/parsing of the input data as well
as will ensure that all input XMLs are tested both for ARGV as well as
XML output. For now we skip tests that don't have an output XML to show
that the this does everything that qemuxml2xmltest does.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Get clean separation between the parsing and argv conversion so that
it's obvious in the test output:
2409) QEMU XML def parse s390-async-teardown.s390x-6.0.0 ... libvirt: QEMU Driver error : unsupported configuration: asynchronous teardown is not available with this QEMU binary
OK
2410) QEMU XML def -> ARGV s390-async-teardown.s390x-6.0.0 ... SKIP
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract the common setup and parsing of the input XML into a separate
helper testQemuConfXMLCommon(). The helper has semantics which will
allow us to call it from multiple places so that VIR_TEST_RANGE will
still work properly even when we'll add multiple steps reusing the
prepared data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the setup of the fake driver from testCompareXMLToArgv to 'mymain'.
With this we also won't need to reset the fake drivers which was done
only partially.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As we don't do any additional parsing of the input file in
qemuxml2argvtest we can simplify the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prior to all tests being converted to "DO_TEST_CAPS*" invocation the
fake-caps tests required knowing the architecture, which was pre-parsed
in qemuxml2argvtest. This code was now removed, but the arch parser was
forgotten.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virDomainDefFormatInternalSetRootName' which is the top level XML
formatter function has the following condition as the very first thing:
if (def->id == -1)
flags |= VIR_DOMAIN_DEF_FORMAT_INACTIVE;
This makes it pointless to separately do inactive->active and
inactive->inactive XML -> XML testing as both will be in the end treated
as inactive->inactive.
This patch adds a warning to virDomainDefFormatInternalSetRootName and
removes the second pointless invocation of the test from
qemuxml2xmtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Neither qemuxml2argvtest nor qemuxml2xmltest now test configs parsed as
active, thus this flag is no longer needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In previous patches we've added testing of XML's explicitly parsed as
active (ensuring that it e.g. has a domain id) formatted into both
active and inactive versions.
Now qemuxml2xmltest can be simplified by making it test only XMLs parsed
as inactive.
To do this we pass VIR_DOMAIN_DEF_PARSE_INACTIVE in parseFlags. This
will also cause that all output files will become identical so the setup
of the test cases can be simplified by using the non-split output file
name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add explicit test cases for XMLs from qemuxml2argvdata which
historically had different output in qemuxml2xmltest.
qemuxmlactivetest explicitly ensures that the input XMLs are parsed in
'live' state and formatted both in inactive as well as live state,
rather than the previously present inactive->inactive, live->live tests
only.
The XMLs picked in this case are those which had separate output files
in qemuxml2argvtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently the xml->xml testing we have in qemuxml2xmltest covers only 3
of the 4 possibilities:
By invocation:
active -> active;
inactive -> inactive;
by unintentionally:
active -> inactive (for configs which don't set an 'id' as the
formatter assumes it's inactive)
To do it better introduce proper active -> inactive/active testing into
qemuxmlactivetest. It's chosen such as we only really parse an XML as
live when restoring a status XML. To give users possibility to avoid
constructing a full status XML add a simpler variant. As of such it will
be used only for configs where we specifically cared about parsing live
data.
To ensure that the formatter doesn't decide that a config is inactive
because it doesn't have an ID we fill in a domain ID if it was not
present in the source.
In this patch the tests are not yet added.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the code so that the test macros invoke a helper function with
no additional steps. This change prevents regressions in compilation
time when adding extra steps for the tests, which happen when the test
macro gets too complicated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The typedef will come in handy to create an autoptr cleaning function
later on.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test will be testing both status XMLs and active XMLs. Rename it to
a shorter name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Get rid of the extra temporary variable and set the parse and format
flags based on liveness together.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The main idea of the test is to validate config when PCIe is compiled
out.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Index is auto-allocated normally. Additionally we now don't need the
extra active/inactive version of this test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case requires an exception in virschematest as the output file
is no longer invalid.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The exception is needed in qemuxml2xmltest which is in one instance
testing update from an invalid config to a valid one. Currently the
compliance with the test is achieved via a hack.
As further patches will be simpler without the hack present we need a
way to invert the expected output in specific cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On the guest configuration side, mention that support for the
"dies" attribute was introduced in libvirt 6.1.0 and clarify
that the ability to use non-default values is subject to
architecture and machine limitations.
On the host capabilities side, the documentation was pretty
much entirely missing. It's still far from perfect, but anything
is better than having no information at all.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since aarch64 doesn't support CPU hotplug at the moment, we have
to get a bit creative.
While the 'query-cpus-fast' output is taken directly from a VM
configured as
<vcpu current='7'>16</vcpu>
<cpu mode='host-passthrough'>
<topology sockets='2' dies='1' clusters='2' cores='2' threads='2'/>
</cpu>
the 'query-hotpluggable-cpus' output is constructed by hand
starting from the former and using the 'x86-dies' test data as
a model.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This makes it so libvirt can obtain accurate information about
guest CPUs from QEMU, and should make it possible to correctly
perform operations such as CPU hotplug.
Of course this is mostly moot at the moment: only aarch64 can use
CPU clusters, and CPU hotplug is not yet implemented on that
architecture.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The default number of CPU clusters is 1, and values other than
that one are currently rejected by all hypervisor drivers.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For machines that don't expose useful information through sysfs,
the dummy ID 0 is used.
https://issues.redhat.com/browse/RHEL-7043
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The data is taken from an HPE Apollo 70 machine, which uses
aarch64 CPUs. It is interesting for us because non-dummy
information about CPU clusters is exposed through sysfs.
In order to keep things reasonable, the data was manually
modified so that only 8 of the original 224 CPUs are included.
Care has been taken to ensure that the topology is otherwise
unaltered.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
virsh already stores the connection URI in 'ctl->connname', use that
instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Probe the current URI so that other places don't need to do that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virsh already stores the connection URI in 'ctl->connname', use that
instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Probe the current URI so that other places don't need to do that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Entering $SCRATCH_DIR, going back to the original directory and
setting SELinux labels for the newly-installed QEMU binaries
are all steps that logically belong to this template rather
than its callers.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We enter $SCRATCH_DIR before going through the process of
cloning QEMU's upstream repo and building it, but once we're
done we don't get back to libvirt's sources, so the very next
step fails with
/tmp/script.: line 188: ci/jobs.sh: No such file or directory
Use pushd/popd to ensure that we're back to the correct place
once QEMU has been built and installed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
