* src/lxc/lxc_driver.c (lxcOpen, lxcDomainSetMemoryParameters)
(lxcDomainGetMemoryParameters): Reject unknown flags.
* src/lxc/lxc_container.c (lxcContainerStart): Rename flags to
cflags to reflect that it is not tied to libvirt.
Like commit 1740c381, but for libvirt-qemu.
* src/remote/qemu_protocol.x (qemu_monitor_command_args): Adjust
type to match API.
* src/qemu_protocol-structs: Update accordingly.
Continuation of commit 313ac7fd, and enforce things with a syntax
check.
Technically, virNetServerClientCalculateHandleMode is not printing
a mode_t, but rather a collection of VIR_EVENT_HANDLE_* bits;
however, these bits are < 8, so there is no different in the
output, and that was the easiest way to silence the new syntax check.
* cfg.mk (sc_flags_debug): New syntax check.
(exclude_file_name_regexp--sc_flags_debug): Add exemptions.
* src/fdstream.c (virFDStreamOpenFileInternal): Print flags in
hex, mode_t in octal.
* src/libvirt-qemu.c (virDomainQemuMonitorCommand)
(virDomainQemuAttach): Likewise.
* src/locking/lock_driver_nop.c (virLockManagerNopInit): Likewise.
* src/locking/lock_driver_sanlock.c (virLockManagerSanlockInit):
Likewise.
* src/locking/lock_manager.c: Likewise.
* src/qemu/qemu_migration.c: Likewise.
* src/qemu/qemu_monitor.c: Likewise.
* src/rpc/virnetserverclient.c
(virNetServerClientCalculateHandleMode): Print mode with %o.
I got bit in a debugging session on an uninstalled libvirtd; the
code tried to call out to the installed $LIBEXECDIR/libvirt_iohelper
instead of my just-built version. So I set a breakpoint and altered
the binary name to be "./src/libvirt_iohelper", and it still failed
because I don't have "." on my PATH.
According to POSIX, execvp only searches PATH if the name does
not contain a slash. Since we are trying to mimic that behavior,
an anchored name should be relative to the current working dir.
This tightens existing behavior, but most callers already pass
an absolute name or a name with no slashes, so it probably won't
be noticeable.
* src/util/util.c (virFindFileInPath): Anchored relative names do
not invoke a PATH search.
When replacing the default SEGV/ABORT/BUS signal handlers you
can't rely on the process being terminated after your custom
handler runs. It is neccessary to manually restore the default
handler and then re-raise the signal
* src/rpc/virnetserver.c: Restore default handler and raise
signal
When monitor is entered with qemuDomainObjEnterMonitorWithDriver, the
correct method for leaving and unlocking the monitor is
qemuDomainObjExitMonitorWithDriver.
Most of the code in these two functions is supposed to be identical but
currently it isn't (which is natural since the code is duplicated).
Let's move common parts of these functions into qemuMigrationPrepareAny.
This also fixes qemuMigrationPrepareTunnel which didn't store received
lockState in the domain object.
Asynchronous jobs may take long time to finish and may consist of
several phases which we need to now about to help with recovery/rollback
after libvirtd restarts.
Query commands are safe to be called during long running jobs (such as
migration). This patch makes them all work without the need to
special-case every single one of them.
The patch introduces new job.asyncCond condition and associated
job.asyncJob which are dedicated to asynchronous (from qemu monitor
point of view) jobs that can take arbitrarily long time to finish while
qemu monitor is still usable for other commands.
The existing job.active (and job.cond condition) is used all other
synchronous jobs (including the commands run during async job).
Locking schema is changed to use these two conditions. While asyncJob is
active, only allowed set of synchronous jobs is allowed (the set can be
different according to a particular asyncJob) so any method that
communicates to qemu monitor needs to check if it is allowed to be
executed during current asyncJob (if any). Once the check passes, the
method needs to normally acquire job.cond to ensure no other command is
running. Since domain object lock is released during that time, asyncJob
could have been started in the meantime so the method needs to recheck
the first condition. Then, normal jobs set job.active and asynchronous
jobs set job.asyncJob and optionally change the list of allowed job
groups.
Since asynchronous jobs only set job.asyncJob, other allowed commands
can still be run when domain object is unlocked (when communicating to
remote libvirtd or sleeping). To protect its own internal synchronous
commands, the asynchronous job needs to start a special nested job
before entering qemu monitor. The nested job doesn't check asyncJob, it
only acquires job.cond and sets job.active to block other jobs.
EnterMonitor and ExitMonitor methods are very similar to their
*WithDriver variants; consolidate them into EnterMonitorInternal and
ExitMonitorInternal to avoid (mainly future) code duplication.
The UML inotify handler would kill off guests when certain
conditions arise, but it forgot to remove transient guests
from the list of domains
* src/uml/uml_driver.c: Cleanup transient guests
Since a host can run several different virtualization types at
the same time, audit messages should allow domains to be identified.
Add a 'virt={qemu,kvm,uml,lxc,...}' key to domain audit messages
* src/conf/domain_audit.c: Identify virt type of guest
When passing through filesystems from the host to a guest, the
host filesystem passed must be audited
* src/conf/domain_audit.{c,h}: Add virDomainAuditFS
The LXC and UML drivers can both make use of auditing. Move
the qemu_audit.{c,h} files to src/conf/domain_audit.{c,h}
* src/conf/domain_audit.c: Rename from src/qemu/qemu_audit.c
* src/conf/domain_audit.h: Rename from src/qemu/qemu_audit.h
* src/Makefile.am: Remove qemu_audit.{c,h}, add domain_audit.{c,h}
* src/qemu/qemu_audit.h, src/qemu/qemu_cgroup.c,
src/qemu/qemu_command.c, src/qemu/qemu_driver.c,
src/qemu/qemu_hotplug.c, src/qemu/qemu_migration.c,
src/qemu/qemu_process.c: Update for changed audit API names
Given a PID, the QEMU driver reads /proc/$PID/cmdline and
/proc/$PID/environ to get the configuration. This is fed
into the ARGV->XML convertor to build an XML configuration
for the process.
/proc/$PID/exe is resolved to identify the full command
binary path
After checking for name/uuid uniqueness, an attempt is
made to connect to the monitor socket. If successful
then 'info status' and 'info kvm' are issued to determine
whether the CPUs are running and if KVM is enabled.
* src/qemu/qemu_driver.c: Implement virDomainQemuAttach
* src/qemu/qemu_process.h, src/qemu/qemu_process.c: Add
qemuProcessAttach to connect to the monitor of an
existing QEMU process
When attaching to an external QEMU process, it is neccessary
to check if the process is using KVM or not. This can be done
using a monitor command
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
API for checking if KVM is enabled
To enable attaching to externally launched QEMU, we need
to be able to reverse engineer a guest XML config based
on the argv for a PID in /proc
* src/qemu/qemu_command.c, src/qemu/qemu_command.h: Add
qemuParseCommandLinePid which extracts QEMU config from
argv in /proc, given a PID number
When converting QEMU argv into a virDomainDefPtr, also extract
the pidfile, monitor character device config and the monitor
mode.
* src/qemu/qemu_command.c, src/qemu/qemu_command.h: Extract
pidfile & monitor config from QEMU argv
* src/qemu/qemu_driver.c, tests/qemuargv2xmltest.c: Add extra
params when calling qemuParseCommandLineString
Avoid re-formatting the pidfile path everytime we need it. Create
it once when starting the guest, and preserve it until the guest
is shutdown.
* src/libvirt_private.syms, src/util/util.c,
src/util/util.h: Add virFileReadPidPath
* src/qemu/qemu_domain.h: Add pidfile field
* src/qemu/qemu_process.c: Store pidfile path in qemuDomainObjPrivate
This tweaks the RPC generator to cope with some naming
conventions used for the QEMU specific APIs
* daemon/remote.c: Server side dispatcher
* src/remote/remote_driver.c: Client side dispatcher
* src/remote/qemu_protocol.x: Wire protocol definition
* src/rpc/gendispatch.pl: Use '$structprefix' in method
names, fix QEMU flags and fix dispatcher method names
Introduce a new API in libvirt-qemu.so
virDomainPtr virDomainQemuAttach(virConnectPtr domain,
unsigned long long pid,
unsigned int flags);
This allows libvirtd to attach to an existing, externally
launched QEMU process. This is useful for QEMU developers who
prefer to launch QEMU themselves for debugging/devel reasons,
but still want the benefit of libvirt based tools like
virt-top, virt-viewer, etc
* include/libvirt/libvirt-qemu.h: Define virDomainQemuAttach
* src/driver.h, src/libvirt-qemu.c, src/libvirt_qemu.syms:
Driver glue for virDomainQemuAttach
Set StrictHostKeyChecking=no to auto-accept new ssh host keys if the
no_verify extra parameter was specified. This won't disable host key
checking for already known hosts. Includes a test and documentation.
Since we are going to add some libvirt-qemu.so entry points in
0.9.4, we might as well start checking for RPC stability, just
as for libvirt.so.
* src/Makefile.am (PROTOCOL_STRUCTS): New variable.
(remote_protocol-structs): Rename...
(%_protocol-structs): ...and make more generic.
* src/qemu_protocol-structs: New file.
log2() is heavy when ffs() can do the same thing. But ffs()
requires gnulib support for mingw.
This patch solves this linker error on Fedora 14.
/usr/bin/ld: libvirt_lxc-domain_conf.o: undefined reference to symbol 'log2@@GLIBC_2.2.5'
/usr/bin/ld: note: 'log2@@GLIBC_2.2.5' is defined in DSO /lib64/libm.so.6 so try adding it to the linker command line
/lib64/libm.so.6: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
* .gnulib: Update to latest, for ffs.
* bootstrap.conf (gnulib_modules): Import ffs.
* src/conf/domain_conf.c (virDomainDefParseXML): Use ffs instead
of log2.
Reported by Dave Allan.
The drivers were accepting domain configs without checking if those
were actually meant for them. For example the LXC driver happily
accepts configs with type QEMU.
Add a check for the expected domain types to the virDomainDefParse*
functions.
Detected in valgrind run:
==9184== 1 bytes in 1 blocks are definitely lost in loss record 1 of 19
==9184== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==9184== by 0x3073715F78: xdr_array (xdr_array.c:97)
==9184== by 0x4CF97C9: xdr_remote_domain_get_security_label_ret (remote_protocol.c:1696)
==9184== by 0x4D08741: virNetMessageDecodePayload (virnetmessage.c:286)
==9184== by 0x4D00F78: virNetClientProgramCall (virnetclientprogram.c:318)
==9184== by 0x4CE3887: call (remote_driver.c:3933)
==9184== by 0x4CF71C6: remoteDomainGetSecurityLabel (remote_driver.c:1580)
==9184== by 0x4CCA480: virDomainGetSecurityLabel (libvirt.c:7340)
==9184== by 0x41993A: cmdDominfo (virsh.c:2414)
==9184== by 0x411E92: vshCommandRun (virsh.c:12730)
==9184== by 0x4211ED: main (virsh.c:14076)
==9184==
==9184== 2 bytes in 1 blocks are definitely lost in loss record 2 of 19
==9184== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==9184== by 0x3073715F78: xdr_array (xdr_array.c:97)
==9184== by 0x4CF974F: xdr_remote_node_get_security_model_ret (remote_protocol.c:1713)
==9184== by 0x4D08741: virNetMessageDecodePayload (virnetmessage.c:286)
==9184== by 0x4D00F78: virNetClientProgramCall (virnetclientprogram.c:318)
==9184== by 0x4CE3887: call (remote_driver.c:3933)
==9184== by 0x4CF6F96: remoteNodeGetSecurityModel (remote_driver.c:1648)
==9184== by 0x4CBF799: virNodeGetSecurityModel (libvirt.c:7382)
==9184== by 0x4197D7: cmdDominfo (virsh.c:2394)
==9184== by 0x411E92: vshCommandRun (virsh.c:12730)
==9184== by 0x4211ED: main (virsh.c:14076)
==9184==
==9184== 8 bytes in 1 blocks are definitely lost in loss record 3 of 19
==9184== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==9184== by 0x3073715F78: xdr_array (xdr_array.c:97)
==9184== by 0x4CF9729: xdr_remote_node_get_security_model_ret (remote_protocol.c:1710)
==9184== by 0x4D08741: virNetMessageDecodePayload (virnetmessage.c:286)
==9184== by 0x4D00F78: virNetClientProgramCall (virnetclientprogram.c:318)
==9184== by 0x4CE3887: call (remote_driver.c:3933)
==9184== by 0x4CF6F96: remoteNodeGetSecurityModel (remote_driver.c:1648)
==9184== by 0x4CBF799: virNodeGetSecurityModel (libvirt.c:7382)
==9184== by 0x4197D7: cmdDominfo (virsh.c:2394)
==9184== by 0x411E92: vshCommandRun (virsh.c:12730)
==9184== by 0x4211ED: main (virsh.c:14076)
==9184==
==9184== LEAK SUMMARY:
==9184== definitely lost: 11 bytes in 3 blocks
* src/remote/remote_driver.c: Avoid leak on remoteDomainGetSecurityLabel
and remoteNodeGetSecurityModel.
Kernel cmdline args can be passed to xen pv domains even when a
bootloader is specified. The current config-to-sxpr mapping
ignores cmdline when bootloader is present.
Since the xend sub-driver is used with many xen toolstack versions,
this patch takes conservative approach of adding an else block to
existing !def->os.bootloader, and only appends sxpr if def->os.cmdline
is non-NULL.
V2: Fix existing testcase broken by this patch and add new testcases
If virDomainSaveConfig() failed, we will return NULL to source,
and the vm is still available to restart during confirm() step in
v3 protocol. So we should kill it off in qemuMigrationFinish().
In v2 protocol, we should not set vm to NULL, because we hold
a reference of vm and should unrefernce it.
This patch creates new <bios> element which, at this time has only the
attribute useserial='yes|no'. This attribute allow users to use
Serial Graphics Adapter and see BIOS messages from the very first moment
domain boots up. Therefore, users can choose boot medium, set PXE, etc.
The dispatch for the CLOSE RPC call was invoking the method
virNetServerClientClose(). This caused the client connection
to be immediately terminated. This meant the reply to the
final RPC message was never sent. Prior to the RPC rewrite
we merely flagged the connection for closing, and actually
closed it when the next RPC call dispatch had completed.
* daemon/remote.c: Flag connection for a delayed close
* daemon/stream.c: Update to use new API for closing
failed connection
* src/rpc/virnetserverclient.c, src/rpc/virnetserverclient.h:
Add support for a delayed connection close. Rename the
virNetServerClientMarkClose method to virNetServerClientImmediateClose
to clarify its semantics
When closing a remote connection we issue a (fairly pointless)
'CLOSE' RPC call to the daemon. If this fails we skip all the
cleanup of private data, but the virConnectPtr object still
gets released as normal. This causes a memory leak. Since the
CLOSE RPC call is pretty pointless, just carry on freeing the
remote driver if it fails.
* src/remote/remote_driver.c: Ignore failure to issue CLOSE
RPC call
When sending back the final OK or ERROR message on completion
of a stream, we were not decrementing the 'nrequests' tracker
on the client. With the default requests limit of '5', this
meant once a client had created 5 streams, they are unable to
process any further RPC calls. There was also a bug when
handling an error from decoding a message length header, which
meant a client connection would not immediately be closed.
* src/rpc/virnetserverclient.c: Fix release of request after
stream completion & mark client for close on error
In one exit path we forgot to free the virNetMessage object causing
a large memory leak for streams which send a lot of data. Some other
paths were calling VIR_FREE directly instead of virNetMessageFree
although this was (currently) harmless.
* src/rpc/virnetclientstream.c: Fix leak of msg object
* src/rpc/virnetclientprogram.c: Call virNetMessageFree instead
of VIR_FREE
The virNetTLSContextNew was being passed key/cert parameters in
the wrong order. This wasn't immediately visible because if
virNetTLSContextNewPath was used, a second bug reversed the order
of those parameters again.
Only if the paths were manually specified in /etc/libvirt/libvirtd.conf
did the bug appear
* src/rpc/virnettlscontext.c: Fix order of params passed to
virNetTLSContextNew
This option accepts 3 values:
-keep, to keep current client connected (Spice+VNC)
-disconnect, to disconnect client (Spice)
-fail, to fail setting password if there is a client connected (Spice)
When virFileOpenAs is called with VIR_FILE_OPEN_AS_UID flag and uid/gid
different from root/root while libvirtd is running as root, we fork a
new child, change its effective UID/GID to uid/gid and run
virFileOpenAsNoFork. It doesn't make any sense to fchown() the opened
file in this case since we already know that uid/gid can access the file
when open succeeds and one of the following situations may happen:
- the file is already owned by uid/gid and we skip fchown even before
this patch
- the file is owned by uid but not gid because it was created in a
directory with SETGID set, in which case it is desirable not to change
the group
- the file may be owned by a completely different user and/or group
because it was created on a root-squashed or even all-squashed NFS
filesystem, in which case fchown would most likely fail anyway
Add libvirt support for MicroBlaze architecture as a QEMU target. Based on mips/mipsel pattern.
Signed-off-by: John Williams <john.williams@petalogix.com>
No caller was using the flags argument, and this function is internal
only, so we might as well skip it.
* src/util/util.h (safezero): Update signature.
* src/util/util.c (safezero): Update function.
* src/locking/lock_driver_sanlock.c
(virLockManagerSanlockSetupLockspace)
(virLockManagerSanlockCreateLease): Update all callers.
* src/storage/storage_backend.c (createRawFile): Likewise.
Most APIs use 'unsigned int flags'; but a few stragglers were using
a signed value. In particular, the vir*GetXMLDesc APIs were
split-brain, with inconsistent choice of types. Although it is
an API break to use 'int' instead of 'unsigned int', it is ABI
compatible (pre-compiled apps will have no difference in behavior),
and generally apps can be recompiled without any issue (only rare
apps that compiled with extremely high warning levels, or which
pass libvirt API around as typed function pointers, would have to
make any code changes to deal with the change).
The migrate APIs use 'unsigned long flags', which can't be changed,
due to ABI constraints.
This patch intentionally touches only the public API, to prove the
claim that most existing code (including driver callbacks and virsh)
still compiles just fine in spite of the type change.
* include/libvirt/libvirt.h.in (virConnectOpenAuth)
(virDomainCoreDump, virDomainGetXMLDesc, virNetworkGetXMLDesc)
(virNWFilterGetXMLDesc): Use unsigned int for flags.
(virDomainHasCurrentSnapshot): Use consistent spelling.
* src/libvirt.c (virConnectOpenAuth, virDomainCoreDump)
(virDomainGetXMLDesc, virNetworkGetXMLDesc)
(virNWFilterGetXMLDesc, do_open): Update accordingly.
The next patch wants to adjust an end pointer to trim trailing
spaces but without modifying the underlying string, but a more
generally useful ability to trim trailing spaces in place is
also worth providing.
* src/util/util.h (virTrimSpaces, virSkipSpacesBackwards): New
prototypes.
* src/util/util.c (virTrimSpaces, virSkipSpacesBackwards): New
functions.
* src/libvirt_private.syms (util.h): Export new functions.
Inspired by a patch by Minoru Usui.
Most clients of virSkipSpaces don't want to omit backslashes.
Also, open-coding the list of spaces is not as nice as using
c_isspace.
* src/util/util.c (virSkipSpaces): Use c_isspace.
(virSkipSpacesAndBackslash): New function.
* src/util/util.h (virSkipSpacesAndBackslash): New prototype.
* src/xen/xend_internal.c (sexpr_to_xend_topology): Update caller.
* src/libvirt_private.syms (util.h): Export new function.
Move stat and mkdir to virFileMakePathHelper.
Also use the stat result to detect whether the existing path
is a directory and set errno accordingly if it's not.
When no <seclabel> is present in the XML, the virDomainSeclabelDef
struct is left as all zeros. Unfortunately, this means it gets setup
as type=dynamic, with relabel=no, which is an illegal combination.
Change the 'bool relabel' attribute in virDomainSeclabelDef to
the inverse 'bool norelabel' so that the default initialization
is sensible
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/security/security_apparmor.c, src/security/security_selinux.c:
Replace 'relabel' with 'norelabel'
Some callers expected virFileMakePath to set errno, some expected
it to return an errno value. Unify this to return 0 on success and
-1 on error. Set errno to report detailed error information.
Also optimize virFileMakePath if stat fails with an errno different
from ENOENT.
add a new API pciDeviceReAttachInit() in pci.c to initialize state values for nodedev reattach
Initialize three state value of device driver to 1. This is just for a new call to
qemudNodeDeviceReAttach()
Although most functions with flags check to verify no application is
passing in flag bits that are currently undefined, for some reason
this function wasn't.
* Change all flags args from int to unsigned int
* Allow passing flags in virDomainObjParseFile (and propogate those
flags all the way down the call chain). Previously the flags were
hardcoded (to VIR_DOMAIN_XML_INTERNAL_STATUS) several layers down
the chain. Pass that value in at the one place that is currently
calling virDomainObjParseFile.
virFileMakePath returns an errno value on error, that will never
be negative. An virFileMakePath error would have been ignored here,
instead of being reported correctly.
The struct A {} A; construct triggers a linker error on OSX about
duplicate symbols. This also differs from the common struct style.
Switch to common style to fix this.
Reported by Justin Clift.
Add a new attribute to the <seclabel> XML to allow resource
relabelling to be enabled with static label usage.
<seclabel model='selinux' type='static' relabel='yes'>
<label>system_u:system_r:svirt_t:s0:c392,c662</label>
</seclabel>
* docs/schemas/domain.rng: Add relabel attribute
* src/conf/domain_conf.c, src/conf/domain_conf.h: Parse
the 'relabel' attribute
* src/qemu/qemu_process.c: Unconditionally clear out the
'imagelabel' attribute
* src/security/security_apparmor.c: Skip based on 'relabel'
attribute instead of label type
* src/security/security_selinux.c: Skip based on 'relabel'
attribute instead of label type and fill in <imagelabel>
attribute if relabel is enabled.
Normally the dynamic labelling mode will always use a base
label of 'svirt_t' for VMs. Introduce a <baselabel> field
in the <seclabel> XML to allow this base label to be changed
eg
<seclabel type='dynamic' model='selinux'>
<baselabel>system_u:object_r:virt_t:s0</baselabel>
</seclabel>
* docs/schemas/domain.rng: Add <baselabel>
* src/conf/domain_conf.c, src/conf/domain_conf.h: Parsing
of base label
* src/qemu/qemu_process.c: Don't reset 'model' attribute if
a base label is specified
* src/security/security_apparmor.c: Refuse to support base label
* src/security/security_selinux.c: Use 'baselabel' when generating
label, if available
virStorageBackendCreateRaw: createRawFile already reported the
exact error.
Before the fix:
error: Failed to create vol vol-create.img
error: cannot create path '/var/lib/libvirt/images/vol-create.img': Unknown error 18446744073709551597
After the fix:
error: Failed to create vol vol-create.img
error: cannot fill file '/var/lib/libvirt/images/vol-create.img': No space left on device
Coverity detected that we could crash on bogus input. Meanwhile,
strtok_r is rather heavy compared to strchr.
* src/storage/storage_backend_iscsi.c (virStorageBackendIQNFound):
Check for parse failure, and use lighter-weight functions.
Detected by Coverity. qemuDomainEventQueue requires a non-NULL
pointer; most callers silently drop the event if we encountered
and OOM situation trying to create the event.
* src/qemu/qemu_migration.c (qemuMigrationFinish): Check for OOM.
Coverity noted that most clients reacted to failure to hash; but in
a best-effort kill loop, we can ignore failure.
* src/util/cgroup.c (virCgroupKillInternal): Ignore hash failure.
Coverity noted that 4 out of 5 calls to virNetClientStreamRaiseError
checked the return value. This case expects a particular value, so
warn if our expectations went wrong due to some bug elsewhere.
* src/rpc/virnetclient.c (virNetClientCallDispatchStream): Warn on
unexpected scenario.
Coverity warns if the majority of callers check a function for
errors, but a few don't; but in qemu_audit and qemu_domain, the
choice to not check for failures was safe. In qemu_command, the
failure to generate a uuid can only occur on a bad pointer.
* src/qemu/qemu_audit.c (qemuAuditCgroup): Ignore failure to get
cgroup controller.
* src/qemu/qemu_domain.c (qemuDomainObjEnterMonitor)
(qemuDomainObjEnterMonitorWithDriver): Ignore failure to get
timestamp.
* src/qemu/qemu_command.c (qemuParseCommandLine): Check for error.
Detected by Coverity. The leak is on an error path, but I'm not
sure whether that path is likely to be triggered in practice.
* src/rpc/virnetserverservice.c (virNetServerServiceAccept): Plug leak.
Spotted by Coverity. If we don't update tmp each time through
the loop, then if the filter being removed was not the head of
the list, we accidentally lose all filters prior to the one we
wanted to remove.
* src/rpc/virnetserverclient.c (virNetServerClientRemoveFilter):
Don't lose unrelated filters.
Detected by Coverity. Some, but not all, error paths were clean;
but they were repetitive so I refactored them.
* src/util/pci.c (pciGetDevice): Plug leak.
To avoid regressions, we let callers specify whether to require a
minor and micro version. Callers that were parsing uname() output
benefit from defaulting to 0, whereas callers that were parsing
version strings from other sources should not change in behavior.
* src/util/util.c (virParseVersionString): Allow caller to choose
whether to fail if minor or micro is missing.
* src/util/util.h (virParseVersionString): Update signature.
* src/esx/esx_driver.c (esxGetVersion): Update callers.
* src/lxc/lxc_driver.c (lxcVersion): Likewise.
* src/openvz/openvz_conf.c (openvzExtractVersionInfo): Likewise.
* src/uml/uml_driver.c (umlGetVersion): Likewise.
* src/vbox/vbox_MSCOMGlue.c (vboxLookupVersionInRegistry):
Likewise.
* src/vbox/vbox_tmpl.c (vboxExtractVersion): Likewise.
* src/vmware/vmware_conf.c (vmwareExtractVersion): Likewise.
* src/xenapi/xenapi_driver.c (xenapiGetVersion): Likewise.
Reported by Matthias Bolte.
According to the automake manual, CPPFLAGS (aka INCLUDES, as spelled
in automake 1.9.6) should only include -I, -D, and -U directives; more
generic directives like -Wall belong in CFLAGS since they affect more
phases of the build process. Therefore, we should be sticking CFLAGS
additions into a CFLAGS container, not a CPPFLAGS container.
* src/Makefile.am (libvirt_driver_vmware_la_CFLAGS): Use AM_CFLAGS.
(INCLUDES): Move CFLAGS items...
(AM_CFLAGS): ...to their proper location.
* python/Makefile.am (INCLUDES, AM_CFLAGS): Likewise.
* tests/Makefile.am (INCLUDES, AM_CFLAGS): Likewise.
(commandtest_CFLAGS, commandhelper_CFLAGS)
(virnetmessagetest_CFLAGS, virnetsockettest_CFLAGS): Use AM_CFLAGS.
linux 3.0 has no micro version number, and that is causing problems
for virParseVersionString. The patch below should allow for:
major
major.minor
major.minor.micro
If major or minor are not present they just default to zero.
We found this in Ubuntu (https://bugs.launchpad.net/bugs/802977)
Detected by Coverity. No real harm in leaving these, but fixing
them cuts down on the noise for future analysis.
* src/rpc/virnetserver.c (virNetServerAddService): Delete unused
entry.
* src/util/sysinfo.c (virSysinfoRead): Delete dead assignment to
base.
EXTRA_DIST files should unconditionally be part of the tarball,
rather than depending on the presence of sanlock-devel.
Meanwhile, parallel builds could fail if we don't use mkdir -p.
* src/Makefile.am (EXTRA_DIST): Always ship sanlock .aug and
template .conf files.
(%-sanlock.conf): Use MKDIR_P.
Detected by Coverity. Both are instances of bad things happening
if pipe2 fails; the virNetClientNew failure could free garbage,
and virNetSocketNewConnectCommand could close random fds.
Note: POSIX doesn't guarantee the contents of fd[0] and fd[1]
after pipe failure: http://austingroupbugs.net/view.php?id=467
We may need to introduce a virPipe2 wrapper that guarantees
that on pipe failure, the fds are explicitly set to -1, rather
than our current state of assuming the fds are unchanged from
their value prior to the failed pipe call.
* src/rpc/virnetclient.c (virNetClientNew): Initialize variable.
* src/rpc/virnetsocket.c (virNetSocketNewConnectCommand):
Likewise.
The virDomainMigratePrepareTunnel3 impl in the remote driver
was using the procedure number for the virDomainMigratePrepareTunnel
method. This doesn't work out so well, because it makes the server
ignore & drop all stream packets
* src/remote/remote_driver.c: Fix procedure for PrepareTunnel3
We ignore any stream data packets which come in for streams which
are not registered, since these packets are async and do not have
a reply. If we get a stream control packet though we must send back
an actual error, otherwise a (broken) client may hang forever
making it hard to diagnose the client bug.
* src/rpc/virnetserverprogram.c: Send back error for unexpected
stream control messages
If a message packet for a invalid stream is received it is just
free'd. This is not good because it doesn't let the client RPC
request counter decrement. If a stream is shutdown with pending
packets the message also isn't released properly because of an
incorrect header type
* daemon/stream.c: Fix message header type
* src/rpc/virnetserverprogram.c: Send dummy reply instead of
free'ing ignored stream message
The qemudDomainSaveFlag method will call EndJob on the 'vm'
object it is passed in. This can result in the 'vm' object
being free'd if the last reference is removed. Thus no caller
of 'qemudDomainSaveFlag' must *ever* reference 'vm' again
upon return.
Unfortunately qemudDomainSave and qemuDomainManagedSave
both call 'virDomainObjUnlock', which can result in a
crash. This is non-deterministic since it involves a race
with the monitor I/O thread.
Fix this by making qemudDomainSaveFlag responsible for
calling virDomainObjUnlock instead.
* src/qemu/qemu_driver.c: Fix potential use after free
when saving guests
The 'char control[CMSG_SPACE(sizeof(int))];' was not being
wiped, so could potentially contain uninitialized bytes.
While this was harmless in this case, it caused complaints
from valgrind
* src/qemu/qemu_monitor.c: memset 'control' variable
in qemuMonitorIOWriteWithFD
The event handler functions do not free the virJSONValuePtr
object. Every event received from a VM thus caused a memory
leak
* src/qemu/qemu_monitor_json.c: Fix leak of event object
The 'function' field in the PCI address was not correctly
initialized, so it was building the wrong address address
string and so not removing all functions from the in use
list.
* src/qemu/qemu_command.c: Fix initialization of PCI function
When adding a callback to an FD stream, we take an extra reference
on the virStreamPtr instance. We forgot to registered a free function
with the callback, so when the callback was removed, the extra
reference held on virStreamPtr was not released.
* src/fdstream.c: Use a free callback to release reference on
virStreamPtr when removing callback
To save on memory reallocation, virNetMessage instances that
have been transmitted, may be reused for a subsequent incoming
message. We forgot to clear out the old data of the message
fully, which caused later confusion upon read.
* src/rpc/virnetserverclient.c: memset entire message before
reusing it
The virNetServerClient object had a hardcoded limit of 10 requests
per client. Extend constructor to allow it to be passed in as a
configurable variable. Wire this up to the 'max_client_requests'
config parameter in libvirtd
* daemon/libvirtd.c: Pass max_client_requests into services
* src/rpc/virnetserverservice.c, src/rpc/virnetserverservice.h: Pass
nrequests_client_max to clients
* src/rpc/virnetserverclient.c, src/rpc/virnetserverclient.h: Allow
configurable request limit
If we pass VIR_DOMAIN_AFFECT_LIVE | VIR_DOMAIN_AFFECT_CONFIG to
qemuGetSchedulerParametersFlags() or *nparams is less than 1,
we will unlock qemu_driver without locking it. It's very dangerous.
We should lock qemu_driver after calling virCheckFlags().
virDomainVcpuPinDefFree() does not free def->cputune.vcpupin if nvcpupin
is 0, and does not set def->cputune.vcpupin to NULL.
If we set nvcpupin to 0 but do not free vcpupin, vcpupin will not be freed
when vm->def is freed.
Use VIR_FREE() instead of virDomainVcpuPinDefFree() to free the memory
and set def->cputune.vcpupint to NULL.
When the remote client receives end of file on the stream
it never invokes the stream callback. Applications relying
on async event driven I/O will thus never see the EOF
condition on the stream
* src/rpc/virnetclient.c, src/rpc/virnetclientstream.c:
Ensure EOF is dispatched
The client stream object can be used independently of the
virNetClientPtr object, so must have full locking of its
own and not rely on any caller.
* src/remote/remote_driver.c: Remove locking around stream
callback
* src/rpc/virnetclientstream.c: Add locking to all APIs
and callbacks
When a filter steals an RPC message, that message must
not be freed, except by the filter code itself
* src/rpc/virnetserverclient.c: Don't free stolen RPC
messages
Improve log messages issued when encountering a bogus
message length to include the actual length and the
limit violated
* src/rpc/virnetmessage.c: Improve log messages
On stream completion it is neccessary to send back a
message with an empty payload. The message header was
not being filled out correctly, since we were not writing
any payload. Add a method for encoding an empty payload
which updates the message headers correctly.
* src/rpc/virnetmessage.c, src/rpc/virnetmessage.h: Add
a virNetMessageEncodePayloadEmpty method
* src/rpc/virnetserverprogram.c: Write empty payload on
stream completion
The RPC client treats failure to register a socket watch
as non-fatal, since we do not mandate that a libvirt client
application provide an event loop implementation. It is
thus inappropriate to a log a message at VIR_LOG_WARN
* src/rpc/virnetsocket.c: Lower logging level
If a streams error is raised, virNetClientIOEventLoop
returns 0, but an error is set. Check for this and
propagate it if present
* src/rpc/virnetclient.c: Propagate streams error
If a callback being invoked from a stream issues a virStreamAbort
operation, the stream data will be free'd but the callback will
then still try to use this. Delay free'ing of the stream data when
a callback is dispatching
* src/fdstream.c: Delay stream free when callback is active
Although we create a temporary file, it is owned by root:root and have
rights 0600. In case qemu does not run under root, it is unable to write
to that file and thus we transfer 0B sized file.
addnhostsSave and hostsfileSave expect < 0 return value on error from
addnhostsWrite and hostsfileWrite but then pass err instead of -err
to virReportSystemError that expects an errno value.
Also addnhostsWrite returns -ENOMEM and errno, change this to -errno.
addnhostsWrite and hostsfileWrite tried to unlink the tempfile after
renaming it, making both fail on the final step. Remove the unnecessary
unlink calls.
networkSaveDnsmasqHostsfile was added in 8fa9c22142 (Apr 2010).
It has a force flag. If the dnsmasq hostsfile already exists force
needs to be true to overwrite it. networkBuildDnsmasqArgv sets force
to false, networkDefine sets it to true. This results in the
hostsfile being written only in networkDefine in the common case.
If no error occurred networkSaveDnsmasqHostsfile returns true and
networkBuildDnsmasqArgv adds the --dhcp-hostsfile to the dnsmasq
command line.
networkSaveDnsmasqHostsfile was changed in 89ae9849f7 (24 Jun 2011)
to return a new dnsmasqContext instead of reusing one. This change broke
the logic of the force flag as now networkSaveDnsmasqHostsfile returns
NULL on error, but the early return -- if force was not set and the
hostsfile exists -- returns 0. This turned the early return in an error
case and networkBuildDnsmasqArgv didn't add the --dhcp-hostsfile option
anymore if the hostsfile already exists. It did because networkDefine
created the hostsfile already.
Then 9d4e2845d4 fixed the return 0 case in networkSaveDnsmasqHostsfile
but didn't apply the force option correctly to the new addnhosts file.
Now force doesn't control an early return anymore, but influences the
handling of the hostsfile context creation and dnsmasqSave is always
called now. This commit also added test cases that reveal several
problems. First, the tests now calls functions that try to write the
dnsmasq config files to disk. If someone runs this tests as root this
might overwrite actively used dnsmasq config files, this is a no-go. Also
the tests depend on configure --localstatedir, this needs to be fixed as
well, because it makes the tests fail when localstatedir is different
from /var.
This patch does several things to fix this:
1) Move dnsmasqContext creation and saving out of networkBuildDnsmasqArgv
to the caller to separate the command line generation from the config
file writing. This makes the command line generation testable without the
risk of interfering with system files, because the tests just don't call
dnsmasqSave.
2) This refactoring of networkSaveDnsmasqHostsfile makes the force flag
useless as the saving happens somewhere else now. This fixes the wrong
usage of the force flag in combination with then newly added addnhosts
file by removing the force flag.
3) Adapt the wrong test cases to the correct behavior, by adding the
missing --dhcp-hostsfile option. Both affected tests contain DHCP host
elements but missed the necessary --dhcp-hostsfile option.
4) Rename networkSaveDnsmasqHostsfile to networkBuildDnsmasqHostsfile,
because it doesn't save the dnsmasqContext anymore.
5) Move all directory creations in dnsmasq context handling code from
the *New functions to dnsmasqSave to avoid directory creations in system
paths in the test cases.
6) Now that networkBuildDnsmasqArgv doesn't create the dnsmasqContext
anymore the test case can create one with the localstatedir that is
expected by the tests instead of the configure --localstatedir given one.
Detected by gcc -O2, introduced in commit 532ce9c2. If dmidecode
outputs a field unrecognized by the parsers, then the code would
dereference an uninitialized eol variable.
* src/util/sysinfo.c (virSysinfoParseBIOS)
(virSysinfoParseSystem, virSysinfoParseProcessor)
(virSysinfoParseMemory): Avoid uninitialized variable.
Detected by gcc -O2:
remote/remote_driver.c: In function 'doRemoteOpen':
remote/remote_driver.c:2753:26: error: 'sasl' may be used uninitialized in this function [-Werror=uninitialized]
* src/remote/remote_driver.c (remoteAuthSASL): Initialize sasl.
The current sanlock plugin requires a central management
application to manually add <lease> elements to each guest,
to protect resources that are assigned to it (eg writable
disks). This makes the sanlock plugin useless for usage
in more ad hoc deployment environments where there is no
central authority to associate disks with leases.
This patch adds a mode where the sanlock plugin will
automatically create leases for each assigned read-write
disk, using a md5 checksum of the fully qualified disk
path. This can work pretty well if guests are using
stable disk paths for block devices eg /dev/disk/by-path/XXXX
symlinks, or if all hosts have NFS volumes mounted in
a consistent pattern.
The plugin will create one lockspace for managing disks
with filename /var/lib/libvirt/sanlock/__LIBVIRT__DISKS__.
For each VM disks, there will be another file to hold
a lease /var/lib/libvirt/sanlock/5903e5d25e087e60a20fe4566fab41fd
Each VM disk lease is usually 1 MB in size. The script
virt-sanlock-cleanup should be run periodically to remove
unused lease files from the lockspace directory.
To make use of this capability the admin will need to do
several tasks:
- Mount an NFS volume (or other shared filesystem)
on /var/lib/libvirt/sanlock
- Configure 'host_id' in /etc/libvirt/qemu-sanlock.conf
with a unique value for each host with the same NFS
mount
- Toggle the 'auto_disk_leases' parameter in qemu-sanlock.conf
Technically the first step can be skipped, in which case
sanlock will only protect against 2 vms on the same host
using the same disk (or the same VM being started twice
due to error by libvirt).
* src/locking/libvirt_sanlock.aug,
src/locking/sanlock.conf,
src/locking/test_libvirt_sanlock.aug: Add config params
for configuring auto lease setup
* libvirt.spec.in: Add virt-sanlock-cleanup program, man
page
* tools/virt-sanlock-cleanup.in: Script to purge unused
disk resource lease files
Introduce a configuration file with a single parameter
'require_lease_for_disks', which is used to decide whether
it is allowed to start a guest which has read/write disks,
but without any leases.
* libvirt.spec.in: Add sanlock config file and augeas
lens
* src/Makefile.am: Install sanlock config file and
augeas lens
* src/locking/libvirt_sanlock.aug: Augeas master lens
* src/locking/test_libvirt_sanlock.aug: Augeas test file
* src/locking/sanlock.conf: Example sanlock config
* src/locking/lock_driver_sanlock.c: Wire up loading
of configuration file
Allow a 'configFile' parameter to be passed into the lock
drivers to provide configuration. Wire up the QEMU driver
to pass in file names '/etc/libvirt/qemu-$NAME.conf
eg qemu-sanlock.conf
* src/locking/lock_driver.h, src/locking/lock_driver_nop.c,
src/locking/lock_driver_sanlock.c, src/locking/lock_manager.c,
src/locking/lock_manager.h: Add configFile parameter
* src/qemu/qemu_conf.c: Pass in configuration file path to
lock driver plugins
If a domain name is defined for a network, add the --expand-hosts
option to the dnsmasq commandline. This results in the domain being
added to any hostname that is defined in a dns <host> element and
contains no '.' characters (i.e. it is an "unqualified"
hostname). Since PTR records are automatically created for any name
defined in <host>, the result of a PTR request will change from the
unqualified name to the qualified name.
This also has the same effect on any hostnames that dnsmasq reads
from the host's /etc/hosts file.
(In the case of guest hostnames that were learned by dnsmasq via DHCP
requests, they were already getting the domain name added on, even
without --expand-hosts).
The standard remote protocol for libvirtd no longer needs to
include definitions of the generic message header/error structs
or status codes. This is all defined in the generic RPC protocol
* src/remote/remote_protocol.x: Remove all RPC message definitions
* src/remote/remote_protocol.h, src/remote/remote_protocol.c:
Re-generate
* daemon/remote_generate_stubs.pl: Delete obsolete script
This guts the libvirtd daemon, removing all its networking and
RPC handling code. Instead it calls out to the new virServerPtr
APIs for all its RPC & networking work
As a fallout all libvirtd daemon error reporting now takes place
via the normal internal error reporting APIs. There is no need
to call separate error reporting APIs in RPC code, nor should
code use VIR_WARN/VIR_ERROR for reporting fatal problems anymore.
* daemon/qemu_dispatch_*.h, daemon/remote_dispatch_*.h: Remove
old generated dispatcher code
* daemon/qemu_dispatch.h, daemon/remote_dispatch.h: New dispatch
code
* daemon/dispatch.c, daemon/dispatch.h: Remove obsoleted code
* daemon/remote.c, daemon/remote.h: Rewrite for new dispatch
APIs
* daemon/libvirtd.c, daemon/libvirtd.h: Remove all networking
code
* daemon/stream.c, daemon/stream.h: Update for new APIs
* daemon/Makefile.am: Link to libvirt-net-rpc-server.la
This guts the current remote driver, removing all its networking
handling code. Instead it calls out to the new virClientPtr and
virClientProgramPtr APIs for all RPC & networking work.
* src/Makefile.am: Link remote driver with generic RPC code
* src/remote/remote_driver.c: Gut code, replacing with RPC
API calls
* src/rpc/gendispatch.pl: Update for changes in the way
streams are handled
The libvirt sanlock plugin is intentionally leaking a file
descriptor to QEMU. To enable QEMU to use this FD under
SELinux, it must be labelled correctly. We dont want to use
the svirt_image_t for this, since QEMU must not be allowed
to actually use the FD. So instead we label it with svirt_t
using virSecurityManagerSetProcessFDLabel
* src/locking/domain_lock.c, src/locking/domain_lock.h,
src/locking/lock_driver.h, src/locking/lock_driver_nop.c,
src/locking/lock_driver_sanlock.c, src/locking/lock_manager.c,
src/locking/lock_manager.h: Optionally pass an FD back to
the hypervisor for security driver labelling
* src/qemu/qemu_process.c: label the lock manager plugin
FD with the process label
Add a new security driver method for labelling an FD with
the process label, rather than the image label
* src/libvirt_private.syms, src/security/security_apparmor.c,
src/security/security_dac.c, src/security/security_driver.h,
src/security/security_manager.c, src/security/security_manager.h,
src/security/security_selinux.c, src/security/security_stack.c:
Add virSecurityManagerSetProcessFDLabel & impl
The virSecurityManagerSetFDLabel method is used to label
file descriptors associated with disk images. There will
shortly be a need to label other file descriptors in a
different way. So the current name is ambiguous. Rename
the method to virSecurityManagerSetImageFDLabel to clarify
its purpose
* src/libvirt_private.syms,
src/qemu/qemu_migration.c, src/qemu/qemu_process.c,
src/security/security_apparmor.c, src/security/security_dac.c,
src/security/security_driver.h, src/security/security_manager.c,
src/security/security_manager.h, src/security/security_selinux.c,
src/security/security_stack.c: s/FDLabel/ImageFDLabel/
This is in response to bugzilla 664629
https://bugzilla.redhat.com/show_bug.cgi?id=664629
The patch below returns an appropriate error message if the chain of
nwfilters is found to contain unresolvable variables and therefore
cannot be instantiated.
Example: The following XMl added to a domain:
<interface type='bridge'>
<mac address='52:54:00:9f:80:45'/>
<source bridge='virbr0'/>
<model type='virtio'/>
<filterref filter='test'/>
</interface>
that references the following filter
<filter name='test' chain='root'>
<filterref filter='clean-traffic'/>
<filterref filter='allow-dhcp-server'/>
</filter>
now displays upon 'virsh start mydomain'
error: Failed to start domain mydomain
error: internal error Cannot instantiate filter due to unresolvable variable: DHCPSERVER
'DHPCSERVER' is contained in allow-dhcp-server.
We already have a public virDomainPinVcpu, which implies that
Pin and Vcpu are treated as separate words. Unreleased commit
e261987c introduced virDomainGetVcpupinInfo as the first public
API that used Vcpupin, although we had prior internal uses of
that spelling. For consistency, change the spelling to be two
words everywhere, regardless of whether pin comes first or last.
* daemon/remote.c: Treat vcpu and pin as separate words.
* include/libvirt/libvirt.h.in: Likewise.
* src/conf/domain_conf.c: Likewise.
* src/conf/domain_conf.h: Likewise.
* src/driver.h: Likewise.
* src/libvirt.c: Likewise.
* src/libvirt_private.syms: Likewise.
* src/libvirt_public.syms: Likewise.
* src/libxl/libxl_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/xen/xend_internal.c: Likewise.
* tools/virsh.c: Likewise.
* src/remote/remote_protocol.x: Likewise.
* src/remote_protocol-structs: Likewise.
Suggested by Matthias Bolte.
Convert networkDnsmasqLeaseFileName to a replaceable function pointer
that allow the testsuite to use a version of that function that is not
depending on configure --localstatedir.
This fixes 5 of 6 test failures, when configure --localstatedir isn't
set to /var.
The build currently fails when trying to create virnetprotocol.c
into $(builddir)/rpc, which doesn't exist. But since the file
is part of the tarball, it should be generated into $(srcdir).
Caught by autobuild.sh.
* src/Makefile.am (VIR_NET_RPC_GENERATED): Generate into srcdir.
This patch implements the code to address the new API (virDomainGetVcpupinInfo)
in the qemu driver.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
This patch introduces a new libvirt API (virDomainGetVcpupinInfo),
as a counterpart to virDomainPinVcpuFlags.
We can use virDomainGetVcpus API to retrieve CPU affinity information,
but can't use this API against inactive domains (at least in case of KVM),
as it lacks a flags parameter.
The usual thing is to add a new virDomainGetVcpusFlags, but that API name
is already occupied by the counterpart to virDomainGetMaxVcpus, which
has a completely different signature.
The virDomainGetVcpupinInfo is the new API to retrieve CPU affinity
information of active and inactive domains. While the usual convention
is to list an array before its length, this API violates that rule
in order to be more like virDomainGetVcpus (where maxinfo was doing
double-duty as the length of two different arrays).
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
It's unlikely that we'll ever want to escape a string as long as
INT_MAX/6, but adding this check can't hurt.
* src/util/buf.c (virBufferEscapeSexpr, virBufferEscapeString):
Check for (unlikely) overflow.
Integer overflow and remote code are never a nice mix.
This has existed since commit 56cd414.
* src/libvirt.c (virDomainGetVcpus): Reject overflow up front.
* src/remote/remote_driver.c (remoteDomainGetVcpus): Avoid overflow
on sending rpc.
* daemon/remote.c (remoteDispatchDomainGetVcpus): Avoid overflow on
receiving rpc.
Done as a separate commit to make backporting the next patch easier.
We are already using "intprops.h", but this makes it explicit.
* .gnulib: Update, for syntax-check fix.
* bootstrap.conf (gnulib_modules): Make intprops use explicit.
* src/locking/domain_lock.c (includes): Drop unused header.
* src/nwfilter/nwfilter_learnipaddr.c (includes): Use "", not <>,
for gnulib.
This commit introduces names definition for the DNS hosts file using
the following syntax:
<dns>
<host ip="192.168.1.1">
<name>alias1</name>
<name>alias2</name>
</host>
</dns>
Some of the improvements and fixes were done by Laine Stump so
I'm putting him into the SOB clause again ;-)
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Laine Stump <laine@laine.org>
The dnsmasq commandline was being built as a part of running
dnsmasq. This patch puts the commandline build into a separate
function (and exports it as a private API) making it possible to build
a dnsmasq commandline without executing it, so that we can write a
test program to verify that the proper commandlines are being created.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
This commit introduces the <dns> element and <txt> record for the
virtual DNS network. The DNS TXT record can be defined using following
syntax in the network XML file:
<dns>
<txt name="example" value="example value" />
</dns>
Also, the Relax-NG scheme has been altered to allow the texts without
spaces only for the name element and some nitpicks about memory
free'ing have been fixed by Laine so therefore I'm adding Laine to the
SOB clause ;-)
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Laine Stump <laine@laine.org>
Commit 12317957ec introduced an incompatible
architectural change for the AppArmor security driver. Specifically,
virSecurityManagerSetAllLabel() is now called much later in
src/qemu/qemu_process.c:qemuProcessStart(). Previously, SetAllLabel() was
called immediately after GenLabel() such that after the dynamic label (profile
name) was generated, SetAllLabel() would be called to create and load the
AppArmor profile into the kernel before qemuProcessHook() was executed. With
12317957ec, qemuProcessHook() is now called
before SetAllLabel(), such that aa_change_profile() ends up being called
before the AppArmor profile is loaded into the kernel (via ProcessLabel() in
qemuProcessHook()).
This patch addresses the change by making GenLabel() load the AppArmor
profile into the kernel after the label (profile name) is generated.
SetAllLabel() is then adjusted to only reload_profile() and append stdin_fn to
the profile when it is specified. This also makes the AppArmor driver work
like its SELinux counterpart with regard to SetAllLabel() and stdin_fn.
Bug-Ubuntu: https://launchpad.net/bugs/801569
When adding virDomainGetVcpusFlags in commit ea3f5c6, I did
enough rebasing that the doc comments in libvirt.c no longer
matched the final chosen enum names in libvirt.h.
And now we've gone ahead and deprecated the names
VIR_DOMAIN_VCPU_{LIVE,CONFIG}.
* src/libvirt.c (virDomainGetVcpusFlags): Fix comment.
Use NUMA's older nodemask_t (fixed-size map) rather than the newer
'struct bitmask' (variable-size) in order to still compile on RHEL 5,
with its numactl-devel-0.9.8.
* src/qemu/qemu_process.c [HAVE_NUMA]: Prefer back-compat mode.
(qemuProcessInitNumaMemoryPolicy): Use older nodemask_t.
To ensure virnetprotocol.[ch] are generated before any other
files, add them to BUILT_SOURCES and MAINTAINERCLEANFILES.
At the same time, move ESX_DRIVER_GENERATED out of DISTCLEAN
and into MAINTAINERCLEANFILES, since they are included in
EXTRA_DIST
* src/Makefile.am: Add virnetprotocol.[ch] to BUILT_SOURCES
The Makefile.am rules for generating RPC protocol had a couple
of bugs
- A instance of remote/rpcgen_fix.pl was not changed
to rpc/genprotocol.pl
- A dep from rpc/virnetmessage.h on the generated
rpc/virnetprotocol.h was missing
- The generated rpc/virnetprotocol.[ch] were not listed
in MAINTAINERCLEANFILES
* Makefile.am: Fix RPC protocol generation
The qemuMigrationPrepareDirect/PrepareTunnel methods accidentally
set the domain job to QEMU_JOB_MIGRATION_OUT when it should have
been QEMU_JOB_MIGRATION_IN. This didn't have any ill-effect, but
it is none-the-less wrong.
* src/qemu/qemu_migration.c: Fix job type
The code emitting taint warnings was mistakenly thinking
that guests run from the QEMU session driver were tainted
for having high privileges. This is of course nonsense
since the session driver is always unprivileged
* src/qemu/qemu_domain.c: Don't warn for high privileges in
non-privileged QEMU
If an application is using libvirt + KVM as a piece of its
internal infrastructure to perform a specific task, it can
be desirable to guarentee the VM dies when the virConnectPtr
disconnects from libvirtd. This ensures the app can't leak
any VMs it was using. Adding VIR_DOMAIN_START_AUTOKILL as
a flag when starting guests enables this to be done.
* include/libvirt/libvirt.h.in: All VIR_DOMAIN_START_AUTOKILL
* src/qemu/qemu_driver.c: Support automatic killing of guests
upon connection close
* tools/virsh.c: Add --autokill flag to 'start' and 'create'
commands
Migration is a multi-step process
1. Begin(src)
2. Prepare(dst)
3. Perform(src)
4. Finish(dst)
5. Confirm(src)
At step 2, a QEMU process is lauched in the destination to
accept the incoming migration. Occasionally the process
that is controlling the migration workflow aborts, and fails
to call step 4, Finish. This leaves a QEMU process running
on the target (albeit with paused CPUs). Unfortunately because
step 2 actives a job on the QEMU process, it is unkillable by
normal means.
By registering the VM for autokill against the src virConnectPtr
in step 2, we can ensure that the guest is forcefully killed off
if the connection is closed without step 4 being invoked
* src/qemu/qemu_migration.c: Register autokill in PrepareDirect
and PrepareTunnel. Unregister autokill on successful run
of Finish
* src/qemu/qemu_process.c: Unregister autokill when stopping a
process
Sometimes it is useful to be able to automatically destroy a guest when
a connection is closed. For example, kill an incoming migration if
the client managing the migration dies. This introduces a map between
guest 'uuid' strings and virConnectPtr objects. When a connection is
closed, any associated guests are killed off.
* src/qemu/qemu_conf.h: Add autokill hash table to qemu driver
* src/qemu/qemu_process.c, src/qemu/qemu_process.h: Add APIs
for performing autokill of guests associated with a connection
* src/qemu/qemu_driver.c: Initialize autodestroy map
For controlled shutdown we issue a 'system_powerdown' command
to the QEMU monitor. This triggers an ACPI event which (most)
guest OS wire up to a controlled shutdown. There is no equiv
ACPI event to trigger a controlled reboot. This patch attempts
to fake a reboot.
- In qemuDomainObjPrivatePtr we have a bool fakeReboot
flag.
- The virDomainReboot method sets this flag and then
triggers a normal 'system_powerdown'.
- The QEMU process is started with '-no-shutdown'
so that the guest CPUs pause when it powers off the
guest
- When we receive the 'POWEROFF' event from QEMU JSON
monitor if fakeReboot is not set we invoke the
qemuProcessKill command and shutdown continues
normally
- If fakeReboot was set, we spawn a background thread
which issues 'system_reset' to perform a warm reboot
of the guest hardware. Then it issues 'cont' to
start the CPUs again
* src/qemu/qemu_command.c: Add -no-shutdown flag if
we have JSON support
* src/qemu/qemu_domain.h: Add 'fakeReboot' flag to
qemuDomainObjPrivate struct
* src/qemu/qemu_driver.c: Fake reboot using the
system_powerdown command if JSON support is available
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
binding for system_reset command
* src/qemu/qemu_process.c: Reset the guest & start CPUs if
fakeReboot is set
Move the daemon/remote_generator.pl to src/rpc/gendispatch.pl
and move the src/remote/rpcgen_fix.pl to src/rpc/genprotocol.pl
* daemon/Makefile.am: Update for new name/location of generator
* src/Makefile.am: Update for new name/location of generator
To facilitate creation of new clients using XDR RPC services,
pull alot of the remote driver code into a set of reusable
objects.
- virNetClient: Encapsulates a socket connection to a
remote RPC server. Handles all the network I/O for
reading/writing RPC messages. Delegates RPC encoding
and decoding to the registered programs
- virNetClientProgram: Handles processing and dispatch
of RPC messages for a single RPC (program,version).
A program can register to receive async events
from a client
- virNetClientStream: Handles generic I/O stream
integration to RPC layer
Each new client program now merely needs to define the list of
RPC procedures & events it wants and their handlers. It does
not need to deal with any of the network I/O functionality at
all.
Allow RPC servers to advertise themselves using MDNS,
via Avahi
* src/rpc/virnetserver.c, src/rpc/virnetserver.h: Allow
registration of MDNS services via avahi
* src/rpc/virnetserverservice.c, src/rpc/virnetserverservice.h: Add
API to fetch the listen port number
* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Add API to
fetch the local port number
* src/rpc/virnetservermdns.c, src/rpc/virnetservermdns.h: Represent
an MDNS advertisement
To facilitate creation of new daemons providing XDR RPC services,
pull a lot of the libvirtd daemon code into a set of reusable
objects.
* virNetServer: A server contains one or more services which
accept incoming clients. It maintains the list of active
clients. It has a list of RPC programs which can be used
by clients. When clients produce a complete RPC message,
the server passes this onto the corresponding program for
handling, and queues any response back with the client.
* virNetServerClient: Encapsulates a single client connection.
All I/O for the client is handled, reading & writing RPC
messages.
* virNetServerProgram: Handles processing and dispatch of
RPC method calls for a single RPC (program,version).
Multiple programs can be registered with the server.
* virNetServerService: Encapsulates socket(s) listening for
new connections. Each service listens on a single host/port,
but may have multiple sockets if on a dual IPv4/6 host.
Each new daemon now merely has to define the list of RPC procedures
& their handlers. It does not need to deal with any network related
functionality at all.
This extends the basic virNetSocket APIs to allow them to have
a handle to the TLS/SASL session objects, once established.
This ensures that any data reads/writes are automagically
passed through the TLS/SASL encryption layers if required.
* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Wire up
SASL/TLS encryption
This provides two modules for handling SASL
* virNetSASLContext provides the process-wide state, currently
just a whitelist of usernames on the server and a one time
library init call
* virNetTLSSession provides the per-connection state, ie the
SASL session itself. This also include APIs for providing
data encryption/decryption once the session is established
* src/Makefile.am: Add to libvirt-net-rpc.la
* src/rpc/virnetsaslcontext.c, src/rpc/virnetsaslcontext.h: Generic
SASL handling code
This provides two modules for handling TLS
* virNetTLSContext provides the process-wide state, in particular
all the x509 credentials, DH params and x509 whitelists
* virNetTLSSession provides the per-connection state, ie the
TLS session itself.
The virNetTLSContext provides APIs for validating a TLS session's
x509 credentials. The virNetTLSSession includes APIs for performing
the initial TLS handshake and sending/recving encrypted data
* src/Makefile.am: Add to libvirt-net-rpc.la
* src/rpc/virnettlscontext.c, src/rpc/virnettlscontext.h: Generic
TLS handling code
Introduces a simple wrapper around the raw POSIX sockets APIs
and name resolution APIs. Allows for easy creation of client
and server sockets with correct usage of name resolution APIs
for protocol agnostic socket setup.
It can listen for UNIX and TCP stream sockets.
It can connect to UNIX, TCP streams directly, or indirectly
to UNIX sockets via an SSH tunnel or external command
* src/Makefile.am: Add to libvirt-net-rpc.la
* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Generic
sockets APIs
* tests/Makefile.am: Add socket test
* tests/virnetsockettest.c: New test case
* tests/testutils.c: Avoid overriding LIBVIRT_DEBUG settings
* tests/ssh.c: Dumb helper program for SSH tunnelling tests
This provides a new struct that contains a buffer for the RPC
message header+payload, as well as a decoded copy of the message
header. There is an API for applying a XDR encoding & decoding
of the message headers and payloads. There are also APIs for
maintaining a simple FIFO queue of message instances.
Expected usage scenarios are:
To send a message
msg = virNetMessageNew()
...fill in msg->header fields..
virNetMessageEncodeHeader(msg)
...loook at msg->header fields to determine payload filter
virNetMessageEncodePayload(msg, xdrfilter, data)
...send msg->bufferLength worth of data from buffer
To receive a message
msg = virNetMessageNew()
...read VIR_NET_MESSAGE_LEN_MAX of data into buffer
virNetMessageDecodeLength(msg)
...read msg->bufferLength-msg->bufferOffset of data into buffer
virNetMessageDecodeHeader(msg)
...look at msg->header fields to determine payload filter
virNetMessageDecodePayload(msg, xdrfilter, data)
...run payload processor
* src/Makefile.am: Add to libvirt-net-rpc.la
* src/rpc/virnetmessage.c, src/rpc/virnetmessage.h: Internal
message handling API.
* testutils.c, testutils.h: Helper for printing binary differences
* virnetmessagetest.c: Validate all XDR encoding/decoding
This patch defines the basics of a generic RPC protocol in XDR.
This is wire ABI compatible with the original remote_protocol.x.
It takes everything except for the RPC calls / events from that
protocol
- The basic header virNetMessageHeader (aka remote_message_header)
- The error object virNetMessageError (aka remote_error)
- Two dummy objects virNetMessageDomain & virNetMessageNetwork
sadly needed to keep virNetMessageError ABI compatible with
the old remote_error
The RPC protocol supports method calls, async events and
bidirectional data streams as before
* src/Makefile.am: Add rules for generating RPC code from
protocol & define a new libvirt-net-rpc.la helper library
* src/rpc/virnetprotocol.x: New generic RPC protocol
GCC complained about a C99 for-loop declaration outside of C99 mode
when compiling on RHEL 5.
* src/qemu/qemu_driver.c (qemudDomainPinVcpuFlags): Avoid C99 for
loop, since gcc 4.1.2 hates it.
This patch fixes the compilation of netlink.c and interface.c on those
systems missing either libnl or that have an older linux/if_link.h
include file not supporting macvtap or VF_PORTS.
WITH_MACVTAP is '1' if newer include files were detected, '0' otherwise.
IFLA_PORT_MAX is defined in linux/if_link.h if yet more functionality is
supported.
volDelete used to return VIR_ERR_INTERNAL_ERROR when attempting to
delete a volume which was still being allocated. It should return
VIR_ERR_OPERATION_INVALID.
* src/storage/storage_driver.c: Fix return of volDelete.
See previous patch for why this is good...
* src/xen/xen_driver.h (xenXMConfCache): Manage filename
dynamically.
* src/xen/xm_internal.c (xenXMConfigCacheAddFile)
(xenXMConfigFree, xenXMDomainDefineXML): Likewise.
POSIX allows implementations where PATH_MAX is undefined, leading
to compilation error. Not to mention that even if it is defined,
it is often wasteful in relation to the amount of data being stored.
All clients of vol->key were audited, and found not to care about
whether key is static or dynamic, except for these offenders:
* src/datatypes.h (struct _virStorageVol): Manage key dynamically.
* src/datatypes.c (virReleaseStorageVol): Free key.
(virGetStorageVol): Copy key.
In a second cleanup step this patch makes several interface functions from macvtap.c commonly available by moving them into interface.c and prefixing their names with 'iface'. Those functions taking Linux-specific structures as parameters are only visible on Linux.
ifaceRestoreMacAddress returns the return code from the ifaceSetMacAddr call and display an error message if setting the MAC address did not work. The caller is unchanged and still ignores the return code (which is ok).
In a first cleanup step, make nlComm from macvtap.c commonly available
for other code to use. Since nlComm uses Linux-specific structures as
parameters it's prototype is only visible on Linux.
Files under src/util must not depend on src/conf
Solve the macvtap problem by moving the definition
of macvtap modes from domain_conf.h into macvtap.h
* src/util/macvtap.c, src/util/macvtap.h: Add enum
for macvtap modes
* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove
enum for macvtap modes
For virtio disks and interfaces, qemu allows users to enable or disable
ioeventfd feature. This means, qemu can execute domain code, while
another thread waits for I/O event. Basically, in some cases it is win,
in some loss. This feature is available via 'ioeventfd' attribute in disk
and interface <driver> element. It accepts 'on' and 'off'. Leaving this
attribute out defaults to hypervisor decision.
The following patch addresses the problem that when a PASSTHROUGH
mode DIRECT NIC connection is made the MAC address of the NIC is
not automatically set and reset to the configured VM MAC and
back again.
The attached patch fixes this problem by setting and resetting the MAC
while remembering the previous setting while the VM is running.
This also works if libvirtd is restarted while the VM is running.
the patch passes make syntax-check
Since we virEventRegisterDefaultImpl is now a public API, callers need
a way to invoke the default registered Handle and Timeout functions. We
already have general functions for these internally, so promote
them to the public API.
v2:
Actually add APIs to libvirt.h
* virDomainDefParse: There is a goto label "no_memory", which
reports OOM error, and then fallthrough label "error". This
patch changes things like following:
virReportOOMError();
goto error;
into:
goto no_memory;
Removes special case code from the generator and handle additional
methods.
The generated version of remoteDispatchDomainPinVcpu(Flags) has no
length check, but this check was useless anyway as it was applied to
data that was already deserialized from its XDR form.
Pinning to all physical cpus means resetting, hence it is preferable to
delete vcpupin setting of XML.
This patch changes qemu driver to delete vcpupin setting by invoking
virDomainVcpupinDel API when pinning the specified virtual cpu to
all host physical cpus.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
This patch add the private API (virDomainVcpupinDel).
This API can delete the vcpupin setting of a specified virtual cpu.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Implemented as setting NUMA policy between fork and exec as a hook,
using libnuma. Only support memory tuning on domain process currently.
For the nodemask out of range, will report soft warning instead of
hard error in libvirt layer. (Kernel will be silent as long as one
of set bit in the nodemask is valid on the host. E.g. For a host
has two NUMA nodes, kernel will be silent for nodemask "01010101").
So, soft warning is the only thing libvirt can do, as one might want
to specify the numa policy prior to a node that doesn't exist yet,
however, it may come as hotplug soon.
* src/conf/domain_conf.h: Introduce one new struct for representing
NUMA tuning related stuffs.
* src/conf/domain_conf.c: Parse and format numatune XML.
When building libvirt without libvirtd, we will receive the following error
message:
make[3]: Entering directory `/home/wency/rpmbuild/BUILD/libvirt-0.9.2/tools'
CC virsh-virsh.o
CC virsh-console.o
GEN virt-xml-validate
GEN virt-pki-validate
CCLD virsh
./src/.libs/libvirt.so: undefined reference to `numa_available'
./src/.libs/libvirt.so: undefined reference to `numa_max_node'
collect2: ld returned 1 exit status
The reason is that: we check numactl only when building qemu driver, and qemu
driver will not be built when bulding without libvirtd. So with_numactl's
value is check and we will not link libnuma.so.
In the other function, we call numa_available() and numa_max_node() only
when HAVE_NUMACTL is 1. We should do the same check in the function nodeGetMemoryStats().
During a savevm operation, libvirt will now use fd migration if qemu
supports it. When the AppArmor driver is enabled, AppArmorSetFDLabel()
is used but since this function simply returns '0', the dynamic AppArmor
profile is not updated and AppArmor blocks access to the save file. This
patch implements AppArmorSetFDLabel() to get the pathname of the file by
resolving the fd symlink in /proc, and then gives that pathname to
reload_profile(), which fixes 'virsh save' when AppArmor is enabled.
Reference: https://launchpad.net/bugs/795800
Most of the safezero() implementations return -1 on error,
setting errno. The safezero() impl using posix_fallocate()
though returned a positive errno value on error (due to
the unusual API contract of posix_fallocate() compared to
most syscall APIs).
* src/util/util.c: Ensure safezero() returns -1 and sets
errno on error.
* src/storage/storage_backend.c: Change safezero != 0 to
< 0 for detecting errors
If the 'mac_filter' configuration parameter is enabled, and there
is a failure to enable filtering, no error is reported back to
the caller. Also fix some bogus whitespace indentation for
hugetlbfs_mount
* src/qemu/qemu_conf.c: Add missing error reporting
Even though rpc uses 'unsigned int' for the _len parameter that
passes the length of item<length>, the public libvirt APIs all
use 'int' and filter out lengths < 0, except for virDomainSendKey.
* include/libvirt/libvirt.h.in (virDomainSendKey): All other APIs
use int for array length.
* src/libvirt.c (virDomainSendKey): Adjust.
* src/driver.h (virDrvDomainSendKey): Likewise.
* daemon/remote_generator.pl: Likewise.
Detected by autobuild.sh when cross-building for mingw.
Introduced in commits ce76e85 and af35cec.
* src/nodeinfo.c (nodeGetCPUStats, nodeGetMemoryStats): Mark
parameters as potentially unused.
The position of the struct parameter in the function signature
differs. Instead of hardcoding the handling for this add an annotation
to the .x file to define the position.
The LXC driver networking uses veth device pairs. These can
be easily hooked into the network filtering code.
* src/lxc/lxc_driver.c: Add calls to setup/teardown nwfilter
The algorithm for autoassigning vethXXX devices, was always
skipping over the starting dev index when finding a free
name for the guest device. This should only be done if the host
device was autoallocated.
* src/lxc/veth.c: Don't skip over veth indexes
Prefer bootindex=N option for -device over the old way -boot ORDER
possibly accompanied with boot=on option for -drive. This gives us full
control over which device will actually be used for booting guest OS.
Moreover, if qemu doesn't support boot=on, this is the only way to boot
of certain disks in some configurations (such as virtio disks when used
together IDE disks) without transforming domain XML to use per device
boot elements.
When an operation started by virDomainBlockPullAll completes (either with
success or with failure), raise an event to indicate the final status. This
allows an API user to avoid polling on virDomainBlockPullInfo if they would
prefer to use the event mechanism.
* daemon/remote.c: Dispatch events to client
* include/libvirt/libvirt.h.in: Define event ID and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle the new event
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for block_stream completion and emit a libvirt block pull event
* src/remote/remote_driver.c: Receive and dispatch events to application
* src/remote/remote_protocol.x: Wire protocol definition for the event
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for BLOCK_STREAM_COMPLETED event
from QEMU monitor
Signed-off-by: Adam Litke <agl@us.ibm.com>
The virDomainBlockPull* family of commands are enabled by the
'block_stream' and 'info block_stream' qemu monitor commands.
* src/qemu/qemu_driver.c src/qemu/qemu_monitor_text.[ch]: implement disk
streaming by using the stream and info stream text monitor commands
* src/qemu/qemu_monitor_json.[ch]: implement commands using the qmp monitor
Signed-off-by: Adam Litke <agl@us.ibm.com>
Acked-by: Daniel P. Berrange <berrange@redhat.com>
The generator can handle DomainBlockPullAll and DomainBlockPullAbort.
DomainBlockPull and DomainBlockPullInfo must be written by hand.
* src/remote/remote_protocol.x: provide defines for the new entry points
* src/remote/remote_driver.c daemon/remote.c: implement the client and
server side
* src/remote_protocol-structs: structure definitions for protocol verification
Signed-off-by: Adam Litke <agl@us.ibm.com>
Set up the types for the block pull functions and insert them into the
virDriver structure definition. Symbols are exported in this patch to prevent
documentation compile failures.
* include/libvirt/libvirt.h.in: new API
* src/driver.h: add the new entry to the driver structure
* python/generator.py: fix compiler errors, the actual python bindings are
implemented later
* src/libvirt_public.syms: export symbols
Signed-off-by: Adam Litke <agl@us.ibm.com>
From a security pov copy and paste between the guest and the client is not
always desirable. So we need to be able to enable/disable this. The best place
to do this from an administration pov is on the hypervisor, so the qemu cmdline
is getting a spice disable-copy-paste option, see bug 693645. Example qemu
invocation:
qemu -spice port=5932,disable-ticketing,disable-copy-paste
https://bugzilla.redhat.com/show_bug.cgi?id=693661
Drivers load running persistent and transient domain configs before
inactive persistent domain configs, however only the latter would set a
domain's autostart flag. This mismatch between the loaded and on-disk
state could later cause problems with "virsh autostart":
# virsh autostart example
error: Failed to mark domain example as autostarted
error: Failed to create symlink '/etc/libvirt/qemu/autostart/example.xml to '/etc/libvirt/qemu/example.xml': File exists
This patch ensures the autostart flag is set correctly even when the
domain is already defined.
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=632100https://bugzilla.redhat.com/show_bug.cgi?id=675319
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Add public virDomainSendKey() and enum libvirt_keycode_set
for the @codeset.
Python version of virDomainSendKey() has not been implemented yet,
it will be done soon.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Previously, the parent process opened 'null' to /dev/null, then
the child process closes 'null' as well as 'childout'. But if
childout was set to be null, then this is a double close. At
least the double close was confined to the child process after a
fork, and therefore there is no risk of another thread opening
an fd of the same value to be bitten by the double close, but it
is always better to avoid double-close to begin with.
Additionally, if all three fds were specified, then opening
'null' was wasted.
This patch fixes things to lazily open null on the first use,
then guarantees it gets closed exactly once.
* src/util/command.c (getDevNull): New helper function.
(virExecWithHook): Use it to avoid spurious opens and double close.
This also reduces malloc pressure for invoking a child when
VIR_DEBUG is enabled.
* src/util/command.c (virExecWithHook): Drop debug, since the only
caller (virCommandRunAsync) also prints debug info.
If qemu supports -chardev, our char frontend aliases are ex. 'charserial0'
not just 'serial0'. Typically we don't use this code path because the
pty's are scraped from stdout.
Qemu once supported following memory stats which will returned by
"query_balloon":
stat_put(dict, "actual", actual);
stat_put(dict, "mem_swapped_in", dev->stats[VIRTIO_BALLOON_S_SWAP_IN]);
stat_put(dict, "mem_swapped_out", dev->stats[VIRTIO_BALLOON_S_SWAP_OUT]);
stat_put(dict, "major_page_faults", dev->stats[VIRTIO_BALLOON_S_MAJFLT]);
stat_put(dict, "minor_page_faults", dev->stats[VIRTIO_BALLOON_S_MINFLT]);
stat_put(dict, "free_mem", dev->stats[VIRTIO_BALLOON_S_MEMFREE]);
stat_put(dict, "total_mem", dev->stats[VIRTIO_BALLOON_S_MEMTOT]);
But it later disabled all the stats except "actual" by commit
07b0403dfc2b2ac179ae5b48105096cc2d03375a.
libvirt doesn't parse "actual", so user will always see a empty result
with "virsh dommemstat $domain". Even qemu haven't disabled the stats,
we should support parsing "actual".
There is the case where cpu affinites for vcpu of qemu doesn't work
correctly. For example, if only one vcpupin setting entry is provided
and its setting is not for vcpu0, it doesn't work.
# virsh dumpxml VM
...
<vcpu>4</vcpu>
<cputune>
<vcpupin vcpu='3' cpuset='9-11'/>
</cputune>
...
# virsh start VM
Domain VM started
# virsh vcpuinfo VM
VCPU: 0
CPU: 31
State: running
CPU time: 2.5s
CPU Affinity: yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
VCPU: 1
CPU: 12
State: running
CPU time: 0.9s
CPU Affinity: yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
VCPU: 2
CPU: 30
State: running
CPU time: 1.5s
CPU Affinity: yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
VCPU: 3
CPU: 13
State: running
CPU time: 1.7s
CPU Affinity: yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
This patch fixes this problem.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Since the addition of the lock manager framework in 6a943419c5
dlopen is always required, but the checks in configure wasn't changed
to reflect that. This didn't show up directly because the VirtualBox
driver linking dlopen in covered it. But disabling the VirtualBox
driver makes the build fail due to missing dlopen.
Change the dlopen check in configure to pick up dlopen when available.
Reported by Ruben Kerkhof.
This patch deprecates following enums:
VIR_DOMAIN_MEM_CURRENT
VIR_DOMAIN_MEM_LIVE
VIR_DOMAIN_MEM_CONFIG
VIR_DOMAIN_VCPU_LIVE
VIR_DOMAIN_VCPU_CONFIG
VIR_DOMAIN_DEVICE_MODIFY_CURRENT
VIR_DOMAIN_DEVICE_MODIFY_LIVE
VIR_DOMAIN_DEVICE_MODIFY_CONFIG
And modify internal codes to use virDomainModificationImpact.
The below patch decreases the response time of libvirt to errors reported by Qemu upon startup by checking whether the qemu process is still alive while polling for the local socket to show up.
This patch also introduces a special handling of signal for the Win32 part of virKillProcess.
If qemu supports multi function PCI device, the format of the PCI address passed
to qemu is "bus=pci.0,multifunction=on,addr=slot.function".
If qemu does not support multi function PCI device, the format of the PCI address
passed to qemu is "bus=pci.0,addr=slot".
Hot pluging/unpluging multi PCI device is not supported now. So the function
of hotplugged PCI device must be 0. When we hot unplug it, we should set release
all functions in the slot.
We save all used PCI address in the hash table. The key is generated by domain,
bus and slot now. We will support multi function PCI device, so the key should
be generated by domain, bus, slot and function.
We do not support to hot unplug multi function PCI device now. If the device is
one function of multi function PCI device, we shoul not allow to hot unplugg
it.
XenAPI session login can fail for a number of reasons, but currently no
specific
reason is displayed to the user, e.g.:
virsh -c XenAPI://citrix-xen.example.com/
Enter username for citrix-xen.example.com: root
Enter root's password for citrix-xen.example.com:
error: authentication failed: (null)
error: failed to connect to the hypervisor
This patch displays the session error description on failure.
Coverity complained about these intentional fallthrough cases, but
not about other cases that were explicitly marked with nice comments.
For some reason, Coverity doesn't seem smart enough to parse the
up-front English comment in virsh about intentional fallthrough :)
* tools/virsh.c (cmdVolSize): Mark fallthrough in a more typical
fashion.
* src/conf/nwfilter_conf.c (virNWFilterRuleDefDetailsFormat)
(virNWFilterRuleDetailsParse): Mark explicit fallthrough.
Detected by Coverity. The beginning of the function already filtered
out NULL objectContentList as invalid. Further investigation shows:
esxVI_RetrieveProperties is generated and returns a list of objects
that match the given propertyFilterSpec.
esxVI_LookupObjectContentByType then tests whether the result
corresponds to the expected occurrence and reports an error otherwise.
This simplifies the callers of esxVI_LookupObjectContentByType, but
due to the missing dereference the check was never performed because
the code thought that at least one item was obtained. NULL represents
an empty list. This is a potential segfault fix because callers of
esxVI_LookupObjectContentByType that specified "required" occurrence
assume *objectContentList to be non-NULL when
esxVI_LookupObjectContentByType succeeds.
* src/esx/esx_vi.c (esxVI_LookupObjectContentByType): Check
correct pointer.
Detected by Coverity. The only ways to get to the cleanup label
were by an early abort (list still unassigned) or after successfully
transferring list to dest, so there is no list to clean up.
* src/secret/secret_driver.c (loadSecrets): Kill dead code.
Detected by Coverity. All existing callers happen to be in
range, so this isn't too serious.
* src/qemu/qemu_cgroup.c (qemuCgroupControllerActive): Check
bounds before dereference.
Coverity already saw through a NULL dereference without these
annotations, and gcc is still too puny to do good NULL analysis.
But clang still benefits (and is easier to run than coverity),
not to mention that adding this bit of documentation to the code
may help future developers remember the constraints.
* src/util/uuid.h (virGetHostUUID, virUUIDFormat): Document
restrictions, for improved static analysis.
Detected by Coverity. Commit a98d8f0d tried to make uuid debugging
more robust, but missed some APIs. And on the APIs that it visited,
the mere act of preparing the debug message ends up dereferencing
uuid prior to the null check. Which means the APIs which are supposed
to gracefully reject NULL arguments now end up with SIGSEGV.
* src/libvirt.c (VIR_UUID_DEBUG): New macro.
(virDomainLookupByUUID, virDomainLookupByUUIDString)
(virNetworkLookupByUUID, virNetworkLookupByUUIDString)
(virStoragePoolLookupByUUID, virStoragePoolLookupByUUIDString)
(virSecretLookupByUUID, virSecretLookupByUUIDString)
(virNWFilterLookupByUUID, virNWFilterLookupByUUIDString): Avoid
null dereference.
Similar in nature to commit fd21ecfd, which shut up valgrind.
sigaction is apparently a nasty interface for analyzer tools,
at least for how many false positives it generates.
* src/util/command.c (virExecWithHook): Initialize entire var, since
coverity gripes about the (unused and non-standard) sa_restorer.
Detected by Coverity. The code was doing math on shifted unsigned
char (which promotes to int), then promoting that to unsigned long
during assignment to size. On 64-bit platforms, this risks sign
extending values of size > 2GiB. Bug present since commit
489fd3 (v0.6.0).
I'm not sure if a specially-crafted bogus qcow2 image could
exploit this, although it's probably not possible, since we
were already checking for the computed results being within
range of our fixed-size buffer.
* src/util/storage_file.c (qcowXGetBackingStore): Avoid sign
extension.
Add a simple handshake with the lxc_controller process so we can detect
process startup failures. We do this by adding a new --handshake cli arg
to lxc_controller for passing a file descriptor. If the process fails to
launch, we scrape all output from the logfile and report it to the user.
Seems reasonable to have all command wrappers in the same place
v2:
Dont move SetInherit
v3:
Comment spelling fix
Adjust WARN0 comment
Remove spurious #include movement
Don't include sys/types.h
Combine virExec enums
Signed-off-by: Cole Robinson <crobinso@redhat.com>
virGetVersion itself doesn't take a virConnectPtr, but in order to obtain
the hypervisor version against which libvirt was compiled it is used in
combination with virConnectGetType like this:
hvType = virConnectGetType(conn)
virGetVersion(&libVer, hvType, &typeVer)
When virConnectGetType is called on a remote connection then the remote
driver returns the type of the underlying driver on the server side, for
example QEMU. Then virGetVersion compares hvType to a set of strings that
depend on configure options and returns LIBVIR_VERSION_NUMBER in most
cases. Now this fails in case libvirt on the client side is just compiled
with the remote driver enabled only and the server side has the actual
driver such as the QEMU driver. It just happens to work when the actual
driver is enabled on client and server side. But that's not always true.
I noticed this on FreeBSD:
freebsd# virsh -c qemu+tcp://192.168.178.22/system version
Compiled against library: libvir 0.9.2
error: failed to get the library version
error: this function is not supported by the connection driver: virGetVersion
This is not FreeBSD specific, happens on Windows as well due to the
similar driver support configuration. The problem is that virConnectGetType
returns QEMU, but virGetVersion on the client side only accepts Remote
as hvType due to all other drivers being disabled on the client side.
Daniel P. Berrange suggested to get rid of all the conditional code in
virGetVersion, ignoring the hvType and always setting typeVer to
LIBVIR_VERSION_NUMBER. virConnectGetVersion is supposed to be used to
obtain the hypervisor version.
When peer-2-peer migration was invoked by a client supporting
v3, but where the target server only supported v2, we'd not
correctly shutdown the guest.
* src/qemu/qemu_migration.c: Ensure guest is shutdown in
v2 peer 2 peer migration
The v2 migration protocol doesn't use cookies, so we should not
be raising an error if the cookie parameters are NULL.
* src/qemu/qemu_migration.c: Don't raise error if cookie is NULL
The error code for virKillProcess is returned in the errno variable
not the return value. THis mistake caused the logs to be filled with
errors when shutting down QEMU processes
* src/qemu/qemu_process.c: Fix process kill check.
VirtualBox 4.0.8 changed the registry key layout. Before the version
number was in a Version key. Now the Version key contains %VER% and
the actual version number is in VersionExt now.
Move value lookup code into its own function: vboxLookupRegistryValue.
This commit is safe precisely because there has been no release
for any of the enum values being deleted (they were added post-0.9.1).
After the 0.9.2 release, we can then take advantage of
virDomainModificationImpact in more places.
* include/libvirt/libvirt.h.in (virDomainModificationImpact): New
enum.
(virDomainSchedParameterFlags, virMemoryParamFlags): Delete, since
these were never released, and the new enum works fine here.
* src/libvirt.c (virDomainGetMemoryParameters)
(virDomainSetMemoryParameters)
(virDomainGetSchedulerParametersFlags)
(virDomainSetSchedulerParametersFlags): Update documentation.
* src/qemu/qemu_driver.c (qemuDomainSetMemoryParameters)
(qemuDomainGetMemoryParameters, qemuSetSchedulerParametersFlags)
(qemuSetSchedulerParameters, qemuGetSchedulerParametersFlags)
(qemuGetSchedulerParameters): Adjust clients.
* tools/virsh.c (cmdSchedinfo, cmdMemtune): Likewise.
Based on ideas by Daniel Veillard and Hu Tao.
This fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=702044https://bugzilla.redhat.com/show_bug.cgi?id=709454
Both of these complain of a failure to use an image file that resides
on a read-only NFS volume. The function in the DAC security driver
that chowns image files to the qemu user:group before using them
already has special cases to ignore failure of chown on read-only file
systems, and in a few other cases, but it hadn't been checking for
EINVAL, which is what is returned if the qemu user doesn't even exist
on the NFS server.
Since the explanation of EINVAL in the chown man page almost exactly
matches the log message already present for the case of EOPNOTSUPP,
I've just added EINVAL to that same conditional.
Coverity couldn't see that priv is NULL on failure. But on failure,
we might as well guarantee that callers don't try to free uninitialized
memory.
* src/remote/remote_driver.c (remoteGenericOpen): Even on failure,
pass priv back to caller.
Coverity complained that infd could be -1 at the point where it is
passed to write, when in reality, this code can only be reached if
infd is non-negative.
* src/util/command.c (virCommandProcessIO): Help out coverity.
Detected by Coverity. Bug introduced in 08106e2044 (unreleased).
* src/conf/domain_conf.c (virDomainChannelDefCheckABIStability):
Use correct sizeof operand.
Detected by Coverity. Introduced in commit aaf2b70, and turned into
a regression in the next few commits through 4e6e6672 (unreleased).
* src/conf/domain_event.c (virDomainEventStateFree): Free object,
per documentation.
Detected by Coverity. This leaked a cpumap on every iteration
of the loop. Leak introduced in commit 1cc4d02 (v0.9.0).
* src/qemu/qemu_process.c (qemuProcessSetVcpuAffinites): Plug
leak, and hoist allocation outside loop.
Spotted by coverity. Triggers on failed stat, although I'm not sure
how easy that condition is, so I'm not sure if this is a runtime
memory hog. Regression introduced in commit 8077d64 (unreleased).
* src/util/storage_file.c (virStorageFileGetMetadataFromFD):
Reduce need for malloc, avoiding a leak.
Coverity detected that options was being set by strdup but never
freed. But why even bother with an options variable? The options
parameter never changes! Leak present since commit 44948f5b (0.7.0).
This function could probably be rewritten to take better advantage
of virCommand, but that is more invasive.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemMount): Avoid wasted strdup, and
guarantee proper cleanup on all paths.
