This is a slight change from previous patches since virSecret
does not have a name only UUID strings.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The virConnectListAllNWFilters() has no extra flags yet, which
simplifies things a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Yet again, we don't need listing by device capabilities, so flags
are unused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This one is a bit simpler since virStoragePoolListAllVolumes()
has no flags yet.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Provide more details related to the requirement that setting one
of the values requires setting all of them.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The libvirtd daemon uses systemd-machined D-Bus API when manipulating
domains. The systemd-machined is D-Bus activated on demand.
However, during system shutdown systemd-machined is stopped concurrently
with libvirtd and virsh users also doing their final cleanup may
transitively fail due to unavailability of systemd-machined. Example
error message
> libvirtd[1390]: 2017-12-20 18:55:56.182+0000: 32700: error : virSystemdTerminateMachine:503 : Refusing activation, D-Bus is shutting down.
To circumvent this we need to explicitly specify both ordering and
requirement dependency (to avoid late D-Bus activation) on
systemd-machined. See [1] for the dependency debate.
[1] https://lists.freedesktop.org/archives/systemd-devel/2018-January/040095.html
We recently added a generic XHCI USB3 controller to QEMU, and libvirt
supports adding that controller rather than the NEC XHCI USB3
controller, but when auto-adding a USB controller to Q35 domains we
were still adding the vendor-specific NEC controller. This patch
changes to add the generic controller instead, if it's available in
the QEMU binary that will be used.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Whenever a different kernel is booted, some capabilities related to KVM
(such as CPUID bits) may change. We need to refresh the cache to see the
changes.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
qemuDomainDefValidateVideo() (called from qemuDomainDefValidate()) is
just a loop performing various checks on each video device. Rather
than maintaining this separate function, just fold the validations
into qemuDomainDeviceDefValidateVideo(), which is called once for each
video device.
Commit 10c73bf1 fixed a bug that I had introduced back in commit
70249927 - if a vhost-scsi device had no manually assigned PCI
address, one wouldn't be assigned automatically. There was a slight
problem with the logic of the fix though - in the case of domains with
pcie-root (e.g. those with a q35 machinetype),
qemuDomainDeviceCalculatePCIConnectFlags() will attempt to determine
if the host-side PCI device is Express or legacy by examining sysfs
based on the host-side PCI address stored in
hostdev->source.subsys.u.pci.addr, but that part of the union is only
valid for PCI hostdevs, *not* for SCSI hostdevs. So we end up trying
to read sysfs for some probably-non-existent device, which fails, and
the function virPCIDeviceIsPCIExpress() returns failure (-1).
By coincidence, the return value is being examined as a boolean, and
since -1 is true, we still end up assigning the vhost-scsi device to
an Express slot, but that is just by chance (and could fail in the
case that the gibberish in the "hostside PCI address" was the address
of a real device that happened to be legacy PCI).
Since (according to Paolo Bonzini) vhost-scsi devices appear just like
virtio-scsi devices in the guest, they should follow the same rules as
virtio devices when deciding whether they should be placed in an
Express or a legacy slot. That's accomplished in this patch by
returning early with virtioFlags, rather than erroneously using
hostdev->source.subsys.u.pci.addr. It also adds a test case for PCIe
to assure it doesn't get broken in the future.
Commit 8708ca01c added virNetDevSwitchdevFeature() to check if a network
device has Switchdev capabilities. virNetDevSwitchdevFeature() attempts
to retrieve the PCI device associated with the network device, ignoring
non-PCI devices. It does so via the following call chain
virNetDevSwitchdevFeature()->virNetDevGetPCIDevice()->
virPCIGetDeviceAddressFromSysfsLink()
For non-PCI network devices (qeth, Xen vif, etc),
virPCIGetDeviceAddressFromSysfsLink() will report an error when
virPCIDeviceAddressParse() fails. virPCIDeviceAddressParse() also
logs an error. After commit 8708ca01c there are now two errors reported
for each non-PCI network device even though the errors are harmless.
To avoid the errors, introduce virNetDevIsPCIDevice() and use it in
virNetDevGetPCIDevice() before attempting to retrieve the associated
PCI device. virNetDevIsPCIDevice() uses the 'subsystem' property of the
device to determine if it is PCI. See the sysfs rules in kernel
documentation for more details
https://www.kernel.org/doc/html/latest/admin-guide/sysfs-rules.html
https://bugzilla.redhat.com/show_bug.cgi?id=1536461
This reverts commit aeda1b8c56.
Problem is that we need mon->lastError to be set because it's
used all over the place. Also, there's nothing wrong with
reporting error if one occurred. I mean, if there's a thread
executing an API and which currently is talking on monitor it
definitely wants the error reported.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When migrating a shutoff domain (i.e., offline migration), we have no
statistics to report and thus jobInfo will be NULL in
qemuMigrationFinish.
Broken by me in v3.10.0-183-ge8784e7868.
https://bugzilla.redhat.com/show_bug.cgi?id=1536351
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This is a variant of EPYC with indirect branch prediction protection.
The only difference between EPYC and EPYC-IBPB is the added "ibpb"
feature.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
After the latest CPU additions, the build fails with clang:
cputest.c:905:1: error: stack frame size of 26136 bytes
in function 'mymain' [-Werror,-Wframe-larger-than=]
Raise the relaxed limit which is used for tests.
We read from QEMU until seeing a \r\n pair to indicate a completed reply
or event. To avoid memory denial-of-service though, we must have a size
limit on amount of data we buffer. 10 MB is large enough that it ought
to cope with normal QEMU replies, and small enough that we're not
consuming unreasonable mem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As usual, a bunch of changes slipped through the cracks during the
development cycle. Update the release notes to include at least the
most notable ones.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Commit 7a931a4204 refactored the code and probably forgot to add
this line.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
This is a variant of Skylake-Server with indirect branch prediction
protection. The only difference between Skylake-Server and
Skylake-Server-IBRS is the added "spec-ctrl" feature.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This is a variant of Skylake-Client with indirect branch prediction
protection. The only difference between Skylake-Client and
Skylake-Client-IBRS is the added "spec-ctrl" feature.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This is a variant of Broadwell with indirect branch prediction
protection. The only difference between Broadwell and Broadwell-IBRS is
the added "spec-ctrl" feature.
The Broadwell-IBRS model in QEMU is a bit different since Broadwell got
several additional features since we added it in cpu_map.xml:
abm, arat, f16c, rdrand, vme, xsaveopt
Adding them only to the -IBRS variant would confuse our CPU detection
code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This is a variant of Broadwell-noTSX with indirect branch prediction
protection. The only difference between Broadwell-noTSX and
Broadwell-noTSX-IBRS is the added "spec-ctrl" feature.
The Broadwell-noTSX-IBRS model in QEMU is a bit different since
Broadwell-noTSX got several additional features since we added it in
cpu_map.xml:
abm, arat, f16c, rdrand, vme, xsaveopt
Adding them only to the -IBRS variant would confuse our CPU detection
code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This is a variant of Haswell with indirect branch prediction protection.
The only difference between Haswell and Haswell-IBRS is the added
"spec-ctrl" feature.
The Haswell-IBRS model in QEMU is a bit different since Haswell got
several additional features since we added it in cpu_map.xml:
arat, abm, f16c, rdrand, vme, xsaveopt
Adding them only to the -IBRS variant would confuse our CPU detection
code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This is a variant of Haswell-noTSX with indirect branch prediction
protection. The only difference between Haswell-noTSX and
Haswell-noTSX-IBRS is the added "spec-ctrl" feature.
The Haswell-noTSX-IBRS model in QEMU is a bit different since
Haswell-noTSX got several additional features since we added it in
cpu_map.xml:
arat, abm, f16c, rdrand, vme, xsaveopt
Adding them only to the -IBRS variant would confuse our CPU detection
code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This is a variant of IvyBridge with indirect branch prediction
protection. The only difference between IvyBridge and IvyBridge-IBRS is
the added "spec-ctrl" feature.
The IvyBridge-IBRS model in QEMU is a bit different since IvyBridge got
several additional features since we added it in cpu_map.xml:
arat, vme, xsaveopt
Adding them only to the -IBRS variant would confuse our CPU detection
code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This is a variant of SandyBridge with indirect branch prediction
protection. The only difference between SandyBridge and SandyBridge-IBRS
is the added "spec-ctrl" feature.
The SandyBridge-IBRS model in QEMU is a bit different since SandyBridge
got several additional features since we added it in cpu_map.xml:
arat, vme, xsaveopt
Adding them only to the -IBRS variant would confuse our CPU detection
code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This is a variant of Westmere with indirect branch prediction
protection. The only difference between Westmere and Westmere-IBRS is
the added "spec-ctrl" feature.
The Westmere-IBRS model in QEMU is a bit different since Westmere got
several additional features since we added it in cpu_map.xml:
arat, pclmuldq, vme
Adding them only to the -IBRS variant would confuse our CPU detection
code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This is a variant of Nehalem with indirect branch prediction protection.
The only difference between Nehalem and Nehalem-IBRS is the added
"spec-ctrl" feature.
Thus the diff matches QEMU, but the new CPU model itself is different.
The QEMU's versions of both models contain "vme" feature, while this
feature is missing in libvirt's models. While we can't change the
existing Nehalem CPU model, we could add "vme" to Nehalem-IBRS to make
it similar to QEMU, but doing so would fool our CPU detecting code so
that any Nehalem CPU with "vme" feature would be detected as
Nehalem-IBRS CPU without spec-ctrl. Not adding "vme" to Nehalem-IBRS is
safe as QEMU will just provide the feature anyway, which matches what
happens with Nehalem (and new enough machine types).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The CPU contains the updated microcode for CVE-2017-5715.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The CPU contains the updated microcode for CVE-2017-5715.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The CPU contains the updated microcode for CVE-2017-5715.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The CPU contains the updated microcode for CVE-2017-5715.
The *-guest.xml and *-json.xml CPU definitions use Skylake-Client CPU
model rather than Broadwell. This is similar to Xeon-E5-2650-v4 and it
is caused by our CPU model selection code when no model matches the CPU
signature (family + model). We'd need to maintain a complete list of CPU
signatures for our CPU models to fix this.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The CPU contains the updated microcode for CVE-2017-5715.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Added in QEMU commits TBD and TBD.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
/usr/bin/qemu-system-x86_64 -S -no-user-config -nodefaults -nographic -machine none,accel=kvm:tcg -qmp unix:/var/lib/libvirt/qemu/capabilities.monitor.sock,server,nowait -pidfile /var/lib/libvirt/qemu/capabilities.pidfile -daemonize
libvirtd needs to be allowed to kill these processes, otherwise they
remain running.
Add a check if it's a iSCSI hostdev and if it's not then don't use the
union member 'iscsi'. The segmentation fault occured when accessing
secinfo->type, but this can vary from case to case.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Update the min fedora to 26. Use a macro to record the min versions so that the
later error message is always in sync with the earlier version check. Clarify
the comment that refers to guessing of dist which does not actually happen.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
RHEL-6 doesn't have bash-completion package by default, it has to be
installed from EPEL.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Similar to commit @f44ec9c1, commit @500cbc06 introduced a new nested
'mdev_types' capability, however the mentioned commit didn't adjust
virNodeDeviceNumOfCaps and virNodeDeviceListCaps functions accordingly
to provide proper support for this capability.
After applying this patch the following python snippet returns the
expected results:
import libvirt
conn = libvirt.openReadOnly('qemu:///system')
devs = conn.listAllDevices()
for dev in devs:
if 'mdev_types' in dev.listCaps():
print dev.name(),dev.numOfCaps(),dev.listCaps()
Signed-off-by: Dan Zheng <dzheng@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Apparently we can't assume that people run readline recent enough
to have rl_completion_quote_character (added in readline-5.0
released in 2011). However, we can't compile without it. So if
not present, disable readline.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The functions defined in these sources are referenced all over
the place, however, compiler only when building with readline.
Thus when building without it linker gets sad as it can't find
them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When building without readline, this function does nothing but
return false. Without touching any of its arguments which
triggers a build error. Therefore, provide a stub that has
arguments marked as unused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
