Previously this test only tested the generated nbdkit command for the
top level disk source. Update it to test the generated commmands for all
sources in the chain.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Regenerate the ci files using the latest libvirt-ci:
commit 5b9b11261fa28cae964fd91638056318f270e300
examples: illustrate use of remote project reference
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
libvirt commit 120a674f25
ci: lcitool: Maintain project package deps lists here
added an override file for lcitool in August, but nobody regenerating
libvirt's ci files from the manifest seemed to use the override dir.
libvirt-ci commit 1f4184edfdd541964a187810b34ac4c7702b6577
commandline: set --extra-data-dir default path
from January made $PWD/ci/lcitool the default.
Reflect the changes made in libvirt-ci's repo here too.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
I've seen examples in the wild of the cluster attribute having
non-zero value on x86_64.
This is obviously quite confusing, but it's the information that
Linux exposes to userspace and we don't really have a way to tell
apart a valid die/cluster ID from a dummy one.
What ultimately matters is that the underlying assumptions about
topology are respected, which they are: in the x86_64 cases that
I have analyzed, for example, each "cluster" contained exactly
one core, so any program that would use this information to
influence guest topology decisions would be unaffected by the
additional level showing up in the hierarchy.
In an attempt to reduce confusion, remove any reference to any
specific value for the attributes having any special meaning
attached to it.
In fact, since there are plans to make it possible to create
guests with multiple CPU clusters on x86_64, rework the note
into a more generic warning cautioning users that an attribute
showing up here does not imply that the same attribute can be
used when defining a guest CPU topology.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
To allow reuse of this template as-is in libvirt-wiki, we need to be
able to specify a distinct asset_href_base and link_href_base. Adjust
the template to allow that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Propagate it as a parameter both from site.xsl and from newapi.xsl, the
latter of which declared it as a variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the few generic styles to the appropriate document. 'libvirt.css'
will now be a compilation of styles related only to libvirt.org.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'table tbody td.y' and 'table tbody td.n' selectors don't exist
since commit 8841302e3d which converted
the table to rST.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate the styles related to the main page template and the build
process specifics (docutils-originated) into a separate CSS file.
Hint: Best viewed with 'git show --color-moved=blocks'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate the libvirt.org specific stuff from the main template style so
that the latter can be reused in libvirt-wiki without modification.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In order to promote simple assets sharing between main libvirt web and
the libvirt-wiki separate the virt tools blog feed loader from the main
code used for search.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
New docutils generates a <section> element rather than a <div
class='section'> as it did before thus breaking our headerlink
generator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The redirect to the 'maven' repository of libvirt doesn't work currently
for libvirt pages as the ':splat' replacement doesn't match due to a
missing '/'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some of our examples use GNU/Linux extensions functions/variables:
1) domtop.c uses usleep(3),
2) logging.c uses getopt(3).
Put _GNU_SOURCE definition at the top of corresponding files so
that users can just grab the code and compile it (in contrast
with the rest of the code where _GNU_SOURCE is declared in
meson-config.h).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virshGetDBusDisplay() function is declared to return a
pointer and yet, in one error path false is returned. Switch the
statement to return NULL, which is what other error paths use to
indicate an error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds a new attribute "register" to the <domain> element. If
set to "yes", the DNS server created for the virtual network is
registered with systemd-resolved as a name server for the associated
domain. The names known to the dnsmasq process serving DNS and DHCP
requests for the virtual network will then be resolvable from the host
by appending the domain name to them.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When checking for machined we do not really care whether systemd itself
is running, we just need machined to be either running or socket
activated by systemd. That is, exactly the same we do for logind.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanups, qemuMonitorIOWriteWithFD() is but a thin wrapper
over virSocketSendMsgWithFDs(). Replace the body of the former
with a call to the latter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanups, virSocketSendFD() is but a thin wrapper
over virSocketSendMsgWithFDs(). Replace the body of the former
with a call to the latter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of using strlen() to calculate length of payload we're
sending, let caller specify the size: they may want to send just
a portion of a buffer (even though the only current user
doesn't).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, virSocketSendMsgWithFDs() reports two errors:
1) if CMSG_FIRSTHDR() fails,
2) if sendmsg() fails.
Well, the latter sets an errno, so caller can just use
virReportSystemError(). And the former - it is very unlikely to
fail because memory for whole control message was allocated just
a few lines above.
The motivation is to unify behavior of virSocketSendMsgWithFDs()
and virSocketSendFD() because the latter is just a subset of the
former (will be addressed later).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The admin connection defaults to the system-wide 'libvirtd' daemon to
manage (libvirtd:///system). As we've now switched to modular daemons
this will not work for most users out of the box:
$ virt-admin version
error: Failed to connect to the admin server
error: no valid connection
error: Failed to connect socket to '/run/user/1000/libvirt/libvirt-admin-sock': No such file or directory
As we don't want to assume which daemon the user wants to manage in the
modular topology there's no reasonable default to pick.
Give a hint to the users to use the '-c' if the connection to the
default URI fails:
$ virt-admin version
NOTE: Connecting to default daemon. Specify daemon using '-c' (e.g. virtqemud:///system)
error: Failed to connect to the admin server
error: no valid connection
error: Failed to connect socket to '/run/user/1000/libvirt/libvirt-admin-sock': No such file or directory
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The 'raw' driver without any special configuration is not needed and
creates overhead in qemu.
Stop using the 'raw' format driver in cases when it's not needed. A
special case when it is needed is for FD passed images with only a
single writable FD passed, where we need an overlay driver to properly
reflect the 'read-only' flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Store whether qemu supports the appropriate option for block-stream and
block-commit commands and always use it if available.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability is asserted when both block-stream and block-commit QMP
commands support the 'backing-mask-protocol' argument.
The argument causes qemu to record 'raw' as the backing file format in
case when a protocol node is used directly. This is needed to preserve
compatibility of images after a block-commit or block-pull libvirt
operation with older libvirt versions in case when we'll want to remove
the unneded 'raw' format drivers from the block graph.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to 'v8.2.0-952-g14639717bf'.
Notable changes:
- 'backing-mask-protocol' feature added for block-commit and block-stream
- 'singlestep' mode dropped
- 'cmpccxadd' cpu feature became available
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Inside of virsocket.c there is an include of poll.h and
PKT_TIMEOUT_MS macro definition. Neither of these is really
needed and in fact it's a leftover after I reworked one of
previously merged commits during review.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
enable VIR_DOMAIN_NET_TYPE_ETHERNET network support for ch guests.
Tested with following interface config:
<interface type='ethernet'>
<target dev='chtap0' managed="yes"/>
<model type='virtio'/>
<driver queues='2'/>
<interface>
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This capability checks if ch can receive multiple fds along with net-add
api. This capability is required to enable multiple queues for
domain/guest interfaces.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virSocketSendMsgWithFDs method send fds along with payload using
SCM_RIGHTS. virSocketRecv method polls, receives and sends the response
to callers.
These methods are required to add network suppport in ch driver.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move domain interface management methods from qemu to hypervisor. This
refactoring allows the domain management methods to be shared between CH and
qemu drivers.
This commit does not introduce any functional changes.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Drop unused parameter from virDomainNetReleaseActualDevice method.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The order of properties in 'device-list-properties' can hange
arbitrarily and git is not great at picking the contexts in JSON to help
seeing what changed.
The new --dump-device-list-properties produces a stable order of
properties and dumps also the type and default value mainly useful for
comparing two .replies files.
Example output:
$ ./scripts/qemu-replies-tool.py tests/qemucapabilitiesdata/caps_9.0.0_x86_64.replies --dump-device-list-properties
(dev) ICH9-LPC acpi-index uint32 (0)
(dev) ICH9-LPC acpi-pci-hotplug-with-bridge-support bool
(dev) ICH9-LPC acpi_disable_cmd uint8
(dev) ICH9-LPC acpi_enable_cmd uint8
(dev) ICH9-LPC addr int32 (-1)
(dev) ICH9-LPC cpu-hotplug-legacy bool
(dev) ICH9-LPC disable_s3 uint8
(dev) ICH9-LPC disable_s4 uint8
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The order of entries in 'qom-list-types' sometimes changes arbitrarily.
The --dump-qom-list-types produces a stable order and drops the for
libvirt unneeded 'parent' information.
Sample output:
$ ./scripts/qemu-replies-tool.py tests/qemucapabilitiesdata/caps_9.0.0_x86_64.replies --dump-qom-list-types
(qom) 486-v1-x86_64-cpu
(qom) 486-x86_64-cpu
(qom) AC97
(qom) AMDVI-PCI
(qom) Broadwell-IBRS-x86_64-cpu
(qom) Broadwell-noTSX-IBRS-x86_64-cpu
(qom) Broadwell-noTSX-x86_64-cpu
(qom) Broadwell-v1-x86_64-cpu
(qom) Broadwell-v2-x86_64-cpu
(qom) Broadwell-v3-x86_64-cpu
[...]
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Make the tool useful also for non-testing purposes by adding 'dump'
mode, which will process the data and output information about the qemu
version.
The first 'dump' mode produces all possible valid query strings per
virQEMUQAPISchemaPathGet/virQEMUCapsQMPSchemaQueries. This is useful for
users to look up a query string via 'grep' rather than trying to come up
with it manually.
Additionally the data as represented by qemu changes naming very often
and that makes it un-reviewable to find changes between two qemu builds.
By using the dump mode, which produces results in stable order we can
use it to 'diff' two .replies file without churn.
Sample output '[...]' denotes an arbitrary trim:
$ ./scripts/qemu-replies-tool.py tests/qemucapabilitiesdata/caps_9.0.0_x86_64.replies --dump-qmp-query-strings
[...]
(qmp) blockdev-add
(qmp) blockdev-add/arg-type/auto-read-only
(qmp) blockdev-add/arg-type/auto-read-only/!bool
(qmp) blockdev-add/arg-type/cache
(qmp) blockdev-add/arg-type/cache/direct
(qmp) blockdev-add/arg-type/cache/direct/!bool
(qmp) blockdev-add/arg-type/cache/no-flush
(qmp) blockdev-add/arg-type/cache/no-flush/!bool
(qmp) blockdev-add/arg-type/detect-zeroes
(qmp) blockdev-add/arg-type/detect-zeroes/^off
(qmp) blockdev-add/arg-type/detect-zeroes/^on
(qmp) blockdev-add/arg-type/detect-zeroes/^unmap
[...]
(qmp) blockdev-add/arg-type/driver
(qmp) blockdev-add/arg-type/driver/^blkdebug
(qmp) blockdev-add/arg-type/driver/^blklogwrites
(qmp) blockdev-add/arg-type/driver/^blkreplay
(qmp) blockdev-add/arg-type/driver/^blkverify
(qmp) blockdev-add/arg-type/driver/^bochs
(qmp) blockdev-add/arg-type/driver/^cloop
[...]
(qmp) blockdev-add/arg-type/+blkdebug
(qmp) blockdev-add/arg-type/+blkdebug/align
(qmp) blockdev-add/arg-type/+blkdebug/align/!int
(qmp) blockdev-add/arg-type/+blkdebug/config
(qmp) blockdev-add/arg-type/+blkdebug/config/!str
(qmp) blockdev-add/arg-type/+blkdebug/image
(qmp) blockdev-add/arg-type/+blkdebug/image (recursion)
(qmp) blockdev-add/arg-type/+blkdebug/image/!str
(qmp) blockdev-add/arg-type/+blkdebug/inject-error
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
If the schema itself is extended in qemu we need to have a notification
to add appropriate handling to ensure that we have full coverage of all
fields.
Add validation that only fields that libvirt currently knows about are
present in the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Unexport the function and 'struct qemuMonitorTestCommandReplyTuple' as
they are currently used only in tests/qemumonitortestutils.c
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The helper was used only in 'qemucapabilitiesnumbering' test which was
removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The test case was completely replaced by the 'qemu-replies-tool.py'
script in default mode.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
