Since aarch64 doesn't support CPU hotplug at the moment, we have
to get a bit creative.
While the 'query-cpus-fast' output is taken directly from a VM
configured as
<vcpu current='7'>16</vcpu>
<cpu mode='host-passthrough'>
<topology sockets='2' dies='1' clusters='2' cores='2' threads='2'/>
</cpu>
the 'query-hotpluggable-cpus' output is constructed by hand
starting from the former and using the 'x86-dies' test data as
a model.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This makes it so libvirt can obtain accurate information about
guest CPUs from QEMU, and should make it possible to correctly
perform operations such as CPU hotplug.
Of course this is mostly moot at the moment: only aarch64 can use
CPU clusters, and CPU hotplug is not yet implemented on that
architecture.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The default number of CPU clusters is 1, and values other than
that one are currently rejected by all hypervisor drivers.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For machines that don't expose useful information through sysfs,
the dummy ID 0 is used.
https://issues.redhat.com/browse/RHEL-7043
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The data is taken from an HPE Apollo 70 machine, which uses
aarch64 CPUs. It is interesting for us because non-dummy
information about CPU clusters is exposed through sysfs.
In order to keep things reasonable, the data was manually
modified so that only 8 of the original 224 CPUs are included.
Care has been taken to ensure that the topology is otherwise
unaltered.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
virsh already stores the connection URI in 'ctl->connname', use that
instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Probe the current URI so that other places don't need to do that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virsh already stores the connection URI in 'ctl->connname', use that
instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Probe the current URI so that other places don't need to do that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Entering $SCRATCH_DIR, going back to the original directory and
setting SELinux labels for the newly-installed QEMU binaries
are all steps that logically belong to this template rather
than its callers.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We enter $SCRATCH_DIR before going through the process of
cloning QEMU's upstream repo and building it, but once we're
done we don't get back to libvirt's sources, so the very next
step fails with
/tmp/script.: line 188: ci/jobs.sh: No such file or directory
Use pushd/popd to ensure that we're back to the correct place
once QEMU has been built and installed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Just like in rest of the function virDomainFSDefParseXML,
use goto error so that def will be cleaned up in error cases.
Signed-off-by: Shaleen Bathla <shaleen.bathla@oracle.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
A QEMU change (10218ae6d006f76410804cc4dc690085b3d008b5) introduced
some libnuma calls that require read access to
/sys/devices/system/node/*/cpumap, which currently is forbidden by the
standard apparmor profile.
This commit allows read-only access to the file specified above.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/515
Signed-off-by: Sergio Durigan Junior <sergio.durigan@canonical.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
In v9.7.0-rc1~130 I've shortened the path that's generated for
<channel/> source. With that, I had to adjust regex that matches
all versions of paths we have ever generated so that we can drop
them (see comment around qemuDomainChrDefDropDefaultPath()). But
as it is usually the case with regexes - they are write only. And
while I attempted to make one portion of the path optional
("/target/") I accidentally made regex accept more, which
resulted in libvirt dropping the user provided path and
generating our own instead.
Fixes: d3759d3674
Resolves: https://issues.redhat.com/browse/RHEL-20807
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The first thread to issue a client RPC request will own the event
loop execution, sitting in the virNetClientIOEventLoop function.
It releases the client lock while running:
virNetClientUnlock()
g_main_loop_run()
virNetClientLock()
If a second thread arrives with an RPC request, it will queue it
for the first thread to process. To inform the first thread that
there's a new request it calls g_main_loop_quit() to break it out
of the main loop.
This works if the first thread is in g_main_loop_run() at that
time. There is a small window of opportunity, however, where
the first thread has released the client lock, but not yet got
into g_main_loop_run(). If that happens, the wakeup from the
second thread is lost.
This patch deals with that by changing the way the wakeup is
performed. Instead of directly calling g_main_loop_quit(), the
second thread creates an idle source to run the quit function
from within the first thread. This guarantees that the first
thread will see the wakeup.
Tested by: Fima Shevrin <efim.shevrin@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When VIR_DOMAIN_BLOCK_RESIZE_CAPACITY is set, the 'size' parameter
is currently ignored. Since applications must none the less pass a
value for this parameter, it is preferrable to declare some explicit
semantics for it.
This declare that the parameter must be 0, or the exact size of the
underlying block device. The latter gives the management application
the ability to sanity check that the block device size matches what
they think it should be.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
These are special in that, when a new target is introduced, some
preparation is needed before the changes can be merged. Since
this only happens every six months or so, it's unsurprising that
we keep messing it up and forgetting some steps. Having notes
right in the file will hopefully help going forward.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These are jobs are supposed to be running tests using a QEMU
binary built from the latest upstream sources, but right now
they're just doing the same thing as the other jobs for the
target. Use the correct job templates.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Notable changes compared to 7.0.0, the most recent version that
we had capabilities for until now:
* SPICE support is no longer compiled in. CCID devices are
also affected as they are implemented using libcacard,
which is part of SPICE;
* uses of -no-acpi are replaced with -M virt,acpi=off;
* -netdev uses JSON.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The vexpress machine has never supported ACPI. This fact has
been silently ignored by QEMU so far, but recent versions have
started reporting attempts to use the combination as an error.
The other features (APIC, PAE) are also not relevant to the
vexpress machine, or the QEMU driver.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
During post-copy migration (once it actually switches to post-copy mode)
dirty memory pages are continued to be migrated iteratively, while the
destination can explicitly request a specific page to be migrated before
the iterative process gets to it (which happens when a guest wants to
read a page that was not migrated yet). Without the postcopy-preempt
capability enabled such pages need to wait until all other pages already
queued are transferred. Enabling this capability will instruct the
hypervisor to create a separate migration channel for explicitly
requested pages so that they can preempt the queue.
The only requirement for the feature to work is running a migration over
a protocol that supports multiple connections. In other words, we can't
pre-create the connection and pass its file descriptor to QEMU (i.e.,
using MIGRATION_DEST_CONNECT_SOCKET), but we have to let QEMU open the
connections itself (using MIGRATION_DEST_SOCKET). This change is applied
to all post-copy migrations even if postcopy-preempt is not supported to
avoid making the code even uglier than it is now. There's no real
difference between the two methods with modern QEMU (which can properly
report connection failures) anyway.
This capability is enabled for all post-copy migration as long as the
capability is supported on both sides of migration.
https://issues.redhat.com/browse/RHEL-7100
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We enable various migration capabilities according to the flags passed
to a migration API. Missing support for such capabilities results in an
error because they are required by the corresponding flag. This patch
adds support for additional optional capability we may want to enable
for a given API flag in case it is supported. This is useful for
capabilities which are not critical for the flags to be supported, but
they can make things work better in some way.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The migration cookie contains two bitmaps of migration capabilities:
supported and automatic. qemuMigrationParamsCheck expects the letter so
lets make it more obvious by renaming the parameter as remoteAuto.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add validation and formatting of the commandline arguments for
'iothread-vq-mapping' parameter. The validation logic mirrors what qemu
allows.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a new <iothreads> sub-element of disk's <driver> which will
allow configuring multiple iothreads and also map them to specific
virt-queues of virtio devices.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability represents the support for mapping virtqueues to
iothreads for the 'virtio-blk' device.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rework the helper to use a GPtrArray structure to simplify callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
