Now that we have some qemuSecurity wrappers over
virSecurityManager APIs, lets make sure everybody sticks with
them. We have them for a reason and calling virSecurityManager
API directly instead of wrapper may lead into accidentally
labelling a file on the host instead of namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Previously the code called virStorageSourceUpdateBlockPhysicalSize which
did not do anything on empty drives since it worked only on block
devices. After the refactor in c5f6151390 it's called for all devices
and thus attempts to deref the NULL path of empty drives.
Add a check that skips the update of the physical size if the storage
source is empty.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1420718
This follows the same check for disk, because we cannot remove iothread
if it's used by disk or by controller. It could lead to crashing QEMU.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If virDomainDelIOThread API was called with VIR_DOMAIN_AFFECT_LIVE
and VIR_DOMAIN_AFFECT_CONFIG and both XML were already a different
it could result in removing iothread from config XML even if there
was a disk using that iothread.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The bare fact that mnt namespace is available is not enough for
us to allow/enable qemu namespaces feature. There are other
requirements: we must copy all the ACL & SELinux labels otherwise
we might grant access that is administratively forbidden or vice
versa.
At the same time, the check for namespace prerequisites is moved
from domain startup time to qemu.conf parser as it doesn't make
much sense to allow users to start misconfigured libvirt just to
find out they can't start a single domain.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These functions do not need to see the whole virDomainDiskDef.
Moreover, they are going to be called from places where we don't
have access to the full disk definition. Sticking with
virStorageSource is more than enough.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have a function for properly assigning the blockdeviotune
info, let's use it instead of dropping the group name on every
assignment. Otherwise it will not work with both --live and --config
options.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
For example when both total_bytes_sec and total_bytes_sec_max are set,
but the former gets cleaned due to new call setting, let's say,
read_bytes_sec, we end up with this weird message for the command:
$ virsh blkdeviotune fedora vda --read-bytes-sec 3000
error: Unable to change block I/O throttle
error: unsupported configuration: value 'total_bytes_sec_max' cannot be set if 'total_bytes_sec' is not set
So let's make it more descriptive. This is how it looks after the change:
$ virsh blkdeviotune fedora vda --read-bytes-sec 3000
error: Unable to change block I/O throttle
error: unsupported configuration: cannot reset 'total_bytes_sec' when 'total_bytes_sec_max' is set
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1344897
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We were setting it based on whether it was supported and that lead to
setting it to NULL, which our JSON code caught. However it ended up
producing the following results:
$ virsh blkdeviotune fedora vda --total-bytes-sec-max 2000
error: Unable to change block I/O throttle
error: internal error: argument key 'group' must not have null value
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Extract the call to qemuDomainSelectHotplugVcpuEntities outside of
qemuDomainSetVcpusLive and decide whether to hotplug or unplug the
entities specified by the cpumap using a boolean flag.
This will allow to use qemuDomainSetVcpusLive in cases where we prepare
the list of vcpus to enable or disable by other means.
For the blockjobs, where libvirt is able to track the state internally
we can fix locking of images we can remove the appropriate locks.
Also when doing a pivoting operation we should not acquire the lock on
any of those images since both are actually locked already.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1302168
Images that became the backing chain of the current image due to the
snapshot need to be unlocked in the lock manager. Also if qemu was
paused during the snapshot the current top level images need to be
released until qemu is resumed so that they can be acquired properly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1191901
The code at first changed the definition and then rolled it back in case
of failure. This was ridiculous. Refactor the code so that the image in
the definition is changed only when the snapshot is successful.
The refactor will also simplify further fix of image locking when doing
snapshots.
Libvirt is able to properly model what happens to the backing chain
after a snapshot so there's no real need to redetect the data.
Additionally with the _REUSE_EXT flag this might end up in redetecting
wrong data if the user puts wrong backing chain reference into the
snapshot image.
The code at the very bottom of the DAC secdriver that calls
chown() should be fine with read-only data. If something needs to
be prepared it should have been done beforehand.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When coldplugging vcpus to a VM that already has a few hotpluggable
vcpus the code might generate invalid configuration as
non-hotpluggable cpus need to be clustered starting from vcpu 0.
This fix forces the added vcpus to be hotpluggable in such case.
Fixes a corner case described in:
https://bugzilla.redhat.com/show_bug.cgi?id=1370357
This patch adds support and documentation for
a generalized hardware cache event called cache_l1d
perf event.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
When changing the metadata via virDomainSetMetadata, we now
emit an event to notify the app of changes. This is useful
when co-ordinating different applications read/write of
custom metadata.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 4b951d1e38 missed the fact that the
VM needs to be resumed after a live external checkpoint (memory
snapshot) where the cpus would be paused by the migration rather than
libvirt.
According to commit id '0282ca45a' the 'physical' value should
essentially be the last offset of the image or the host physical
size in bytes of the image container. However, commit id '15fa84ac'
refactored the GetBlockInfo to use the same returned data as the
GetStatsBlock API for an active domain. For the 'entry->physical'
that would end up being the "actual-size" as set through the
qemuMonitorJSONBlockStatsUpdateCapacityOne (commit '7b11f5e5').
Digging deeper into QEMU code one finds that actual_size is
filled in using the same algorithm as GetBlockInfo has used for
setting the 'allocation' field when the domain is inactive.
The difference in values is seen primarily in sparse raw files
and other container type files (such as qcow2), which will return
a smaller value via the stat API for 'st_blocks'. Additionally
for container files, the 'capacity' field (populated via the
QEMU "virtual-size" value) may be slightly different (smaller)
in order to accomodate the overhead for the container. For
sparse files, the state 'st_size' field is returned.
This patch thus alters the allocation and physical values for
sparse backed storage files to be more appropriate to the API
contract. The result for GetBlockInfo is the following:
capacity: logical size in bytes of the image (how much storage
the guest will see)
allocation: host storage in bytes occupied by the image (such
as highest allocated extent if there are no holes,
similar to 'du')
physical: host physical size in bytes of the image container
(last offset, similar to 'ls')
NB: The GetStatsBlock API allows a different contract for the
values:
"block.<num>.allocation" - offset of the highest written sector
as unsigned long long.
"block.<num>.capacity" - logical size in bytes of the block device
backing image as unsigned long long.
"block.<num>.physical" - physical size in bytes of the container
of the backing image as unsigned long long.
External disk-only snapshots with recent enough qemu don't require
libvirt to pause the VM. The logic determining when to resume cpus was
slightly flawed and attempted to resume them even if they were not
paused by the snapshot code. This normally was not a problem, but with
locking enabled the code would attempt to acquire the lock twice.
The fallout of this bug would be a error from the API, but the actual
snapshot being created. The bug was introduced with when adding support
for external snapshots with memory (checkpoints) in commit f569b87.
Resolves problems described by:
https://bugzilla.redhat.com/show_bug.cgi?id=1403691
When attaching a device to a domain that's using separate mount
namespace we must maintain /dev entries in order for qemu process
to see them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The libvirt-domain.h documentation indicates that for a qcow2 file
in a filesystem being used for a backing store should report the disk
space occupied by a file; however, commit id '15fa84ac' altered the
code to trust that the wr_highest_offset should be used whenever
wr_highest_offset_valid was set.
As it turns out this will lead to indeterminite results. For an active
domain when qemu hasn't yet had the need to find the wr_highest_offset
value, qemu will report 0 even though qemu-img will report the proper
disk size. This causes reporting of the following XML:
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2'/>
<source file='/path/to/test-1g.qcow2'/>
to be as follows:
Capacity: 1073741824
Allocation: 0
Physical: 1074139136
with qemu-img indicating:
image: /path/to/test-1g.qcow2
file format: qcow2
virtual size: 1.0G (1073741824 bytes)
disk size: 1.0G
Once the backing source file is opened on the guest, then wr_highest_offset
is updated, but only to the high water mark and not the size of the file.
This patch will adjust the logic to check for the file backed qcow2 image
and enforce setting the allocation to the returned 'physical' value, which
is the 'actual-size' value from a 'query-block' operation.
NB: The other consumer of the wr_highest_offset output (GetAllDomainStats)
has a contract that indicates 'allocation' is the offset of the highest
written sector, so it doesn't need adjustment.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Instead of having duplicated code in qemuStorageLimitsRefresh and
virStorageBackendUpdateVolTargetInfo to get capacity specific data
about the storage backing source or volume -- create a common API
to handle the details for both.
As a side effect, virStorageFileProbeFormatFromBuf returns to being
a local/static helper to virstoragefile.c
For the QEMU code - if the probe is done, then the format is saved so
as to avoid future such probes.
For the storage backend code, there is no need to deal with the probe
since we cannot call the new API if target->format == NONE.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Instead of having duplicated code in qemuStorageLimitsRefresh and
virStorageBackendUpdateVolTargetInfoFD to fill in the storage backing
source or volume allocation, capacity, and physical values - create a
common API that will handle the details for both.
The common API will fill in "default" capacity values as well - although
those more than likely will be overridden by subsequent code. Having just
one place to make the determination of what the values should be will
make things be more consistent.
For the QEMU code - the data filled in will be for inactive domains
for the GetBlockInfo and DomainGetStatsOneBlock API's. For the storage
backend code - the data will be filled in during the volume updates.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit id '8dc27259' introduced virStorageSourceUpdateBlockPhysicalSize
in order to retrieve the physical size for a block backed source device
for an active domain since commit id '15fa84ac' changed to use the
qemuMonitorGetAllBlockStatsInfo and qemuMonitorBlockStatsUpdateCapacity
API's to (essentially) retrieve the "actual-size" from a 'query-block'
operation for the source device.
However, the code only was made functional for a BLOCK backing type
and it neglected to use qemuOpenFile, instead using just open. After
the open the block lseek would find the end of the block and set the
physical value, close the fd and return.
Since the code would return 0 immediately if the source device wasn't
a BLOCK backed device, the physical would be displayed incorrectly,
such as follows in domblkinfo for a file backed source device:
Capacity: 1073741824
Allocation: 0
Physical: 0
This patch will modify the algorithm to get the physical size for other
backing types and it will make use of the qemuDomainStorageOpenStat
helper in order to open/stat the source file depending on its type.
The qemuDomainGetStatsOneBlock will no longer inhibit printing errors,
but it will still ignore them leaving the physical value set to 0.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Split out the opening of the file and fetch of the stat buffer into a
helper qemuDomainStorageOpenStat. This will handle either opening the
local or remote storage.
Additionally split out the cleanup of that into a separate helper
qemuDomainStorageCloseStat which will either close the file or
call the virStorageFileDeinit function.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Originally added by commit id '89646e69' prior to commit id '15fa84ac'
and '71d2c172' which ensured that qemuStorageLimitsRefresh was only called
for inactive domains.
Adjust the comment describing the need for FIXME and move all the text
to the function description.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In preparation to the code move to virnetdevtap.c, this change:
* renames virNetInterfaceStats to virNetDevTapInterfaceStats
* changes 'path' to 'ifname', to use the same vocable as other
method in virnetdevtap.c.
* Add the attributes checker
When vhostuser interfaces are used, the interface statistics
are not available in /proc/net/dev.
This change looks at the openvswitch interfaces statistics
tables to provide this information for vhostuser interface.
Note that in openvswitch world drop/error doesn't always make sense
for some interface type. When these informations are not available we
set them to 0 on the virDomainInterfaceStats.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's nothing to compress if the requested snapshot memory format is
set to 'raw' explicitly. After commit 9e14689ea libvirt would try to
run /sbin/raw to process the memory stream if the qemu.conf option
snapshot_image_format is set.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1402726
If you've ever tried running a huge page backed guest under
different user than in qemu.conf, you probably failed. Problem is
even though we have corresponding APIs in the security drivers,
there's no implementation and thus we don't relabel the huge page
path. But even if we did, so far all of the domains share the
same path:
/hugepageMount/libvirt/qemu
Our only option there would be to set 0777 mode on the qemu dir
which is totally unsafe. Therefore, we can create dir on
per-domain basis, i.e.:
/hugepageMount/libvirt/qemu/domainName
and chown domainName dir to the user that domain is configured to
run under.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far this function takes virDomainObjPtr which:
1) is an overkill,
2) might be not available in all the places we will use it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
With current perf framework, this patch adds support and documentation
for the branch_instructions perf event.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
Rather than have multiple bool values, create a single enum with bits
representing what fields are set. Fields are generally set in groups
of 3 (read, write, total).
Rather than using negative logic and setting the maxparams to a lesser
value based on which capabilities exist, alter the logic to modify the
maxparams based on a base value plus the found capabilities. Reduces the
chance that some backported feature produces an incorrect value.
The function just returned cached capabilities without checking whether
they are still valid. We should check that and refresh the capabilities
to make sure we don't return stale data. In other words, we should do
what all other lookup functions do.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If a user asked for a KVM domain capabilities when KVM is not available,
we would happily return data we got when probing through TCG and
pretended they were relevant for KVM. Let's just report KVM is not
supported to avoid confusion.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When domain capabilities were introduced we did not have enough data to
decide whether KVM works on the host or not and thus working legacy/VFIO
device assignment was used as a witness. Now that we know whether KVM
was enabled when probing QEMU capabilities (and thus we know it's
working), we can use this knowledge to provide better default value for
virttype.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We have couple of functions that operate over NULL terminated
lits of strings. However, our naming sucks:
virStringJoin
virStringFreeList
virStringFreeListCount
virStringArrayHasString
virStringGetFirstWithPrefix
We can do better:
virStringListJoin
virStringListFree
virStringListFreeCount
virStringListHasString
virStringListGetFirstWithPrefix
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Removed the comment 'Set the migration source' as it isn't valid anymore
and 'start it up' isn't useful as qemuProcessStart() is already a
speaking name.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
qemuDomainObjExitAgent is unsafe.
First it accesses domain object without domain lock.
Second it uses outdated logic that goes back to commit 79533da1 of
year 2009 when code was quite different. (unref function
instead of unreferencing only unlocked and disposed object
in case of last reference and leaved unlocking to the caller otherwise).
Nowadays this logic may lead to disposing locked object
i guess.
Another problem is that the callers of qemuDomainObjEnterAgent
use domain object again (namely priv->agent) without domain lock.
This patch address these two problems.
qemuDomainGetAgent is dropped as unused.
Sometimes after domain restart agent is unavailabe even
if it is up and running in guest. Diagnostic message is
"QEMU guest agent is not available due to an error"
that is 'priv->agentError' is set. Investiagion shows that
'priv->agent' is not NULL, so error flag is set probably
during domain shutdown process and not cleaned up eventually.
The patch is quite simple - just clean up error flag unconditionally
upon domain stop.
Other hunks address other cases when error flag is not cleaned up.
1. processSerialChangedEvent. We need to clean error flag
unconditionally here too. For example if upon first 'connected' event we
fail to connect and set error flag and then connect on second
'connected' event then error flag will remain set erroneously
and make agent unavailable.
2. qemuProcessHandleAgentEOF. If error flag is set and we get
EOF we need to change state (and diagnostic) from 'error' to
'not connected'.
qemuConnectAgent return -1 or -2 in case of different errors.
A. -1 is a case of unsuccessuful connection to guest agent.
B. -2 is a case of destoyed domain during connection attempt.
All qemuConnectAgent callers handle the first error the same way
so let's move this logic into qemuConnectAgent itself. Patched
function returns 0 in case A and -1 in case B.
New line character in name of domain is now forbidden because it
mess virsh output and can be confusing for users.
Validation of name is done in drivers, after parsing XML to avoid
problems with dissappeared domains which was already created with
new-line char in name.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It was introduced by commit 7a51d9ebb, which started to use
monitor commands without job acquiring, which is unsafe and leads
to simultaneous access to vm->mon structure by different threads.
Crash backtrace is the following (shortened):
Program received signal SIGSEGV, Segmentation fault.
qemuMonitorSend (mon=mon@entry=0x7f4ef4000d20, msg=msg@entry=0x7f4f18e78640) at qemu/qemu_monitor.c:1011
1011 while (!mon->msg->finished) {
0 qemuMonitorSend () at qemu/qemu_monitor.c:1011
1 0x00007f691abdc720 in qemuMonitorJSONCommandWithFd () at qemu/qemu_monitor_json.c:298
2 0x00007f691abde64a in qemuMonitorJSONCommand at qemu/qemu_monitor_json.c:328
3 qemuMonitorJSONQueryCPUs at qemu/qemu_monitor_json.c:1408
4 0x00007f691abcaebd in qemuMonitorGetCPUInfo g@entry=false) at qemu/qemu_monitor.c:1931
5 0x00007f691ab96863 in qemuDomainRefreshVcpuHalted at qemu/qemu_domain.c:6309
6 0x00007f691ac0af99 in qemuDomainGetStatsVcpu at qemu/qemu_driver.c:18945
7 0x00007f691abef921 in qemuDomainGetStats at qemu/qemu_driver.c:19469
8 qemuConnectGetAllDomainStats at qemu/qemu_driver.c:19559
9 0x00007f693382e806 in virConnectGetAllDomainStats at libvirt-domain.c:11546
10 0x00007f6934470c40 in remoteDispatchConnectGetAllDomainStats at remote.c:6267
(gdb) p mon->msg
$1 = (qemuMonitorMessagePtr) 0x0
This change fixes it by calling qemuDomainRefreshVcpuHalted only when job is acquired.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Function qemuDomainAttachShmemDevice() steals the device data if the
hotplug was successful, but the condition checked for unsuccessful
execution otherwise.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This is needed in order to migrate a domain with shmem devices as that
is not allowed to migrate.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If we failed to unlink old dom cfg file, we goto rollback.
But inside rollback, we fogot to unlink the new dom cfg file.
This patch fixes this issue.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Whilst working on another issue, I've noticed that in some
functions we have a local @driver variable among with access to
global @qemu_driver variable. This makes no sense.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Rather than waiting until we've free'd up all the resources, cause the
'workerPool' thread pool to flush as soon as possible during stateCleanup.
Otherwise, it's possible something waiting to run will SEGV such as is the
case during race conditions of simultaneous exiting libvirtd and qemu process.
Resolves the following crash:
[1] crash backtrace: (bt is shortened a bit):
0 0x00007ffff7282f2b in virClassIsDerivedFrom
(klass=0xdeadbeef, parent=0x55555581d650) at util/virobject.c:169
1 0x00007ffff72835fd in virObjectIsClass
(anyobj=0x7fffd024f580, klass=0x55555581d650) at util/virobject.c:365
2 0x00007ffff7283498 in virObjectLock
(anyobj=0x7fffd024f580) at util/virobject.c:317
3 0x00007ffff722f0a3 in virCloseCallbacksUnset
(closeCallbacks=0x7fffd024f580, vm=0x7fffd0194db0,
cb=0x7fffdf1af765 <qemuProcessAutoDestroy>)
at util/virclosecallbacks.c:164
4 0x00007fffdf1afa7b in qemuProcessAutoDestroyRemove
(driver=0x7fffd00f3a60, vm=0x7fffd0194db0) at qemu/qemu_process.c:6365
5 0x00007fffdf1adff1 in qemuProcessStop
(driver=0x7fffd00f3a60, vm=0x7fffd0194db0, reason=VIR_DOMAIN_SHUTOFF_CRASHED,
asyncJob=QEMU_ASYNC_JOB_NONE, flags=0)
at qemu/qemu_process.c:5877
6 0x00007fffdf1f711c in processMonitorEOFEvent
(driver=0x7fffd00f3a60, vm=0x7fffd0194db0) at qemu/qemu_driver.c:4545
7 0x00007fffdf1f7313 in qemuProcessEventHandler
(data=0x555555832710, opaque=0x7fffd00f3a60) at qemu/qemu_driver.c:4589
8 0x00007ffff72a84c4 in virThreadPoolWorker
(opaque=0x555555805da0) at util/virthreadpool.c:167
Thread 1 (Thread 0x7ffff7fb1880 (LWP 494472)):
1 0x00007ffff72a7898 in virCondWait
(c=0x7fffd01c21f8, m=0x7fffd01c21a0) at util/virthread.c:154
2 0x00007ffff72a8a22 in virThreadPoolFree
(pool=0x7fffd01c2160) at util/virthreadpool.c:290
3 0x00007fffdf1edd44 in qemuStateCleanup ()
at qemu/qemu_driver.c:1102
4 0x00007ffff736570a in virStateCleanup ()
at libvirt.c:807
5 0x000055555556f991 in main (argc=1, argv=0x7fffffffe458) at libvirtd.c:1660
We don't support cpu pinning for TCG domains because QEMU runs them in
one thread only. But vcpupin command was able to set them, which
resulted in a failed startup, so make sure that doesn't happen.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
When user tries to resume already running domain (Qemu or LXC)
VIR_ERR_OPERATION_INVALID error should be raised with message that
domain is already running.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1009008
https://bugzilla.redhat.com/show_bug.cgi?id=1300776
Complete the implementation of support for TLS encryption on
chardev TCP transports by adding the hotplug ability of a secret
to generate the passwordid for the TLS object for chrdev, RNG,
and redirdev.
Fix up the order of object removal on failure to be the inverse
of the attempted attach (for redirdev, chr, rng) - for each the
tls object was being removed before the chardev backend.
Likewise, add the ability to hot unplug that secret object as well
and be sure the order of unplug matches that inverse order of plug.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add support for a duration/length for the bps/iops and friends.
Modify the API in order to add the "blkdeviotune." specific definitions
for the iotune throttling duration/length options
total_bytes_sec_max_length
write_bytes_sec_max_length
read_bytes_sec_max_length
total_iops_sec_max_length
write_iops_sec_max_length
read_iops_sec_max_length
Create a helper to set the bytes/iops iotune default values based on
the current qemu setting for both the live and persistent definitions.
NB: This also fixes an unreported bug where the persistent values for
*_max and size_iops_sec would be set back to 0 if unrelated persistent
values were set.
Create a macros to hide all the comparisons for each of the fields.
Add a 'continue;' for a compiler hint that we only need to find one
this should be similar enough to the if - elseif - elseif logic.
Extended qemuDomainGetStatsVcpu to include the per vcpu halted
indicator if reported by QEMU. The key for new boolean value
has the format "vcpu.<n>.halted".
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Change the virDomainChrDef to use a pointer to 'source' and allocate
that pointer during virDomainChrDefNew.
This has tremendous "fallout" in the rest of the code which mainly
has to change source.$field to source->$field.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Certain operations may make the vcpu order information invalid. Since
the order is primarily used to ensure migration compatibility and has
basically no other user benefits, clear the order prior to certain
operations and document that it may be cleared.
All the operations that would clear the order can still be properly
executed by defining a new domain configuration rather than using the
helper APIs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1370357
virDomainDefSetVcpus was not designed to handle coldplug of vcpus now
that we can set state of vcpus individually.
Introduce qemuDomainSetVcpusConfig that properly handles state changes
of vcpus when coldplugging so that invalid configurations are not
created.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1375939
https://bugzilla.redhat.com/show_bug.cgi?id=1368417
So far, when it comes to 'virsh update-device --config' of disks
we are limiting ourselves for just the disk source update and
just for CDROMs and floppies. This makes no sense. Especially if
you look around and see that we already allow full update to
graphics and net devices. So let's just take whatever XML user
wants to have there and replace our internal definition with it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
enum types are unsigned and the qemuGetCompressionProgram
function can return -1 on error. It is therefore inappropriate
to return an enum type. This fixes a build error where the
internal 'ret' variable was used in a comparison with -1
../../src/qemu/qemu_driver.c: In function 'qemuGetCompressionProgram':
../../src/qemu/qemu_driver.c:3280:5: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits]
../../src/qemu/qemu_driver.c:3289:5: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits]
cc1: all warnings being treated as errors
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We want to pass the proper opaque pointer instead of NULL to
virDomainDefParse and subsequently virDomainDefParseNode too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some callers might want to pass yet another pointer to opaque
data to post parse callbacks. The driver generic one is not
enough because two threads executing post parse callback might
want to see different data (e.g. domain object pointer that
domain def belongs to).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Based upon a patch from Chen Hanxiao <chenhanxiao@gmail.com>, rather than
need to call virFindFileInPath twice, let's just save the path and pass it
along with the compressed type. (NB: the second call would be in virExec as
called from virCommandRunAsync which is called from qemuMigrationToFile
using the argument 'compressor' which up to this point would be the string
from the cfg file that isn't the fully qualified path).
Since we now have the path, we can remove qemuCompressProgramName which
would return NULL or the string representation of the compress type.
