Future patches which will implement more bulk stats groups for QEMU will
need to access the connection object.
To accommodate that, a few changes are needed:
* enrich internal prototype to pass qemu driver object
* add per-group flag to mark if one collector needs monitor access or not
* If at least one collector of the requested stats needs monitor access
we must start a query job for each domain. The specific collectors
will run nested monitor jobs inside that.
* If the job can't be acquired we pass flags to the collector so
specific collectors that need monitor access can be skipped in order
to gather as much data as is possible.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Check to see if the UEFI binary mentioned in qemu.conf actually
exists, and if so expose it in domcapabilities like
<loader ...>
<value>/path/to/ovmf</value>
</loader>
We introduce some generic domcaps infrastructure for handling
a dynamic list of string values, it may be of use for future bits.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Up till now the virQEMUCapsFillDomainCaps() was type of void as
there was no way for it to fail. This is, however, going to
change in the next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
qemu for IBM Power processor architecture is adding functionality for
supporting multiple 'pseries' machine type versions, each with different
capabilities. This patch is for supporting the same
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
As of 542899168c we learned libvirt to use UEFI for domains.
However, management applications may firstly query if libvirt
supports it. And this is where virConnectGetDomainCapabilities()
API comes handy.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virStorageSourceInitChainElement initializes a new storage chain element
for use as a new disk source. If the new element doesn't contain the
driver name, copy it from the old source.
This fixes issue where a disk would forget the driver after a snapshot.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140984
Commit b606bbb4 broke reporting of errors when setting of guest time
fails via the guest agent as the return value is not checked and later
overwritten by the return value qemuMonitorRTCResetReinjection();
Fix this by checking the return value before resetting the RTC
reinjection.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1142294
For tuning the network, alternative devices
for creating tap and vhost devices can be specified via:
<backend tap='/dev/net/tun' vhost='/dev/net-vhost'/>
Instead of checking upfront if the <driver> element will be needed
in a big condition, just format all the attributes into a string
and output the <driver> element if the string is not empty.
We already are checking for negative value, reporting an error, but
using wrong function and the check only succeeds when a value that
cannot be converted to number successfully is encountered. This patch
provides just a minor change in call of the right version
of function virStrToLong.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1138539
The first one occurs in openvzDomainMigratePrepare3Params() where in
case no remote uri is given, the distant hostname is used. The name is
obtained via virGetHostname() which require callers to free the
returned value.
The second leak lies in openvzDomainMigratePerform3Params(). There's a
virCommand used later. However, at the beginning of the function
virCheckFlags() is called which returns. So the command created was
leaked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, the setns() wrapper is supported only for x86_64 and i686
which leaves us failing to build on other platforms like arm, aarch64
and so on. This means, that the wrapper needs to be extended to those
platforms and make to fail on runtime not compile time.
The syscall numbers for other platforms was fetched using this
command:
kernel.git $ git grep "define.*__NR_setns" | grep -e arm -e powerpc -e s390
arch/arm/include/uapi/asm/unistd.h:#define __NR_setns (__NR_SYSCALL_BASE+375)
arch/arm64/include/asm/unistd32.h:#define __NR_setns 375
arch/powerpc/include/uapi/asm/unistd.h:#define __NR_setns 350
arch/s390/include/uapi/asm/unistd.h:#define __NR_setns 339
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The backing store string location offset 0 determines that the file
isn't present. The string size shouldn't be then checked:
from qemu.git/docs/specs/qcow2.txt
== Header ==
The first cluster of a qcow2 image contains the file header:
Byte 0 - 3: magic
QCOW magic string ("QFI\xfb")
4 - 7: version
Version number (valid values are 2 and 3)
8 - 15: backing_file_offset
Offset into the image file at which the backing file name
is stored (NB: The string is not null terminated). 0 if the
image doesn't have a backing file.
16 - 19: backing_file_size
Length of the backing file name in bytes. Must not be
longer than 1023 bytes. Undefined if the image doesn't have
a backing file. ^^^^^^^^^
This patch intentionally leaves the backing file string size check in
place in case a malformatted file would be presented to libvirt. Also
according to the docs the string size is maximum 1023 bytes, thus this
patch adds a check to verify that.
I was also able to verify that the check was done the same way in the
legacy qcow fromat (in qemu's code).
If there are no iothreads, then return from qemuProcessDetectIOThreadPIDs
without error; otherwise, the following occurs:
error: Failed to start domain $dom
error: An error occurred, but the cause is unknown
https://bugzilla.redhat.com/show_bug.cgi?id=1101574
Add an option 'iothreadpin' to the <cpuset> to allow for setting the
CPU affinity for each IOThread.
The iothreadspin will mimic the vcpupin with respect to being able to
assign each iothread to a specific CPU, although iothreads ids start
at 1 while vcpu ids start at 0. This matches the iothread naming scheme.
Modify qemuProcessStart() in order to allowing setting affinity to
specific CPU's for IOThreads. The process followed is similar to
that for the vCPU's.
This involves adding a function to fetch the IOThread id's via
qemuMonitorGetIOThreads() and adding them to iothreadpids[] list.
Then making sure all the cgroup data has been properly set up and
finally assigning affinity.
In order to support cpuset setting, introduce qemuSetupCgroupIOThreadsPin
and qemuSetupCgroupForIOThreads to mimic the existing Vcpu API's.
These will support having an 'iotrhreadpin' element in the 'cpuset' in
order to pin named IOThreads to specific CPU's. The IOThread pin names
will follow the IOThread naming scheme starting at 1 (eg "iothread1")
up through an including the def->iothreads value.
When spanning tree protocol is allowed in bridge settings, forward delay
value is set as well (default is 0 if omitted). Until now, there was no
check for delay value validity. Delay makes sense only as a positive
numerical value.
Note: However, even if you provide positive numerical value, brctl
utility only uses values from range <2,30>, so the number provided can
be modified (kernel most likely) to fall within this range.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1125764
Coverity complains about the calculation of the buf & len within
the PROBE macro. So to quiet things down, do the calculation prior
to usage in either write() or qemuMonitorIOWriteWithFD() calls and
then have the PROBE use the calculated values - which works.
Seems when commit id 'ea130e3b' added the checks to ensure each of
the hard_limit, soft_limit, and swap_hard_limit wasn't set at
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED - a copy/paste error of using
the 'hard_limit' for each comparison was done. Adjust the code.
Coverity complains that because of how 'offset' is initialized to
0 (zero), the resulting math and comparison on rem is pointless.
According to the origin commit id '3ec128989', the code is a
replacement for gmtime(), but without the localtime() or GMT
calculations - so just remove this code and add a comment
indicating the removal
Since 98b9acf5aa
This was a false positive where Coverity was complaining that the
remoteDeserializeTypedParameters() could allocate 'params', but
none of the callers could return the allocated memory back to their
caller since on input the param was passed by value. Additionally,
the flow of the code was that if params was NULL on entry, then each
function would return 'nparams' as the number of params entries the
caller would need to allocate in order to call the function again
with 'nparams' and 'params' being set. By the time the deserialize
routine was called params would have something. For other callers
where the 'params' was passed by reference as NULL since it's expected
that the deserialize allocates the memory and then have that passed
back to the original caller to dispose there was no Coverity issue.
As it turns out Coverity didn't quite seem to understand the
relationship between 'nparams' and 'params'; however, if the
!userAllocated path of the deserialize code compared against
limit in any manner, then the Coverity error went away which
was quite strange, but useful.
As it turns out one code path remoteDomainGetJobStats had a
comparison against 'limit' while another remoteConnectGetAllDomainStats
did not assuming that limit would be checked. So I refactored the
code a bit to cause the limit check to occur in deserialize for
both conditions and then only made the check of current returned
size against the incoming *nparams fail the non allocation case.
This means the job code doesn't need to check the limit any more,
while the stats code now does check the limit.
Additionally, to help perhaps decipher which of the various
callers to the deserialize code caused the failure - I used
a #define to pass the __FUNCNAME__ of the caller along so that
error messages could have something like:
error: remoteConnectGetAllDomainStats: too many parameters '2' for nparams '0'
error: Reconnected to the hypervisor
(it's a contrived error just to show the funcname in the error)
The manufacurer and product from USB device itself are usually not particularly
useful -- they tend to be missing, or ugly (all-uppercase, padded with spaces,
etc.). Prefer what's in the usb id database and fall back to descriptors only
if the device is too new to be in database.
https://bugzilla.redhat.com/show_bug.cgi?id=1138887
This patch adds initial migration support to the OpenVZ driver,
using the VIR_DRV_FEATURE_MIGRATION_PARAMS family of migration
functions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We stupidly modeled block job bandwidth after migration
bandwidth, which in turn was an 'unsigned long' and therefore
subject to 32-bit vs. 64-bit interpretations. To work around
the fact that 10-gigabit interfaces are possible but don't fit
within 32 bits, the original interface took the number scaled
as MiB/sec. But this scaling is rather coarse, and it might
be nice to tune bandwidth finer than in megabyte chunks.
Several of the block job calls that can set speed are fed
through a common interface, so it was easier to adjust them all
at once. Note that there is intentionally no flag for the new
virDomainBlockCopy; there, since the API already uses a 64-bit
type always, instead of a possible 32-bit type, and is brand
new, it was easier to just avoid scaling issues. As with the
previous patch that adjusted the query side (commit db33cc24),
omitting the new flag preserves old behavior, and the
documentation now mentions limits of what happens when a 32-bit
machine is on either client or server side.
* include/libvirt/libvirt.h.in (virDomainBlockJobSetSpeedFlags)
(virDomainBlockPullFlags)
(VIR_DOMAIN_BLOCK_REBASE_BANDWIDTH_BYTES)
(VIR_DOMAIN_BLOCK_COMMIT_BANDWIDTH_BYTES): New enums.
* src/libvirt.c (virDomainBlockJobSetSpeed, virDomainBlockPull)
(virDomainBlockRebase, virDomainBlockCommit): Document them.
* src/qemu/qemu_driver.c (qemuDomainBlockJobSetSpeed)
(qemuDomainBlockPull, qemuDomainBlockRebase)
(qemuDomainBlockCommit, qemuDomainBlockJobImpl): Support new flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
Upstream qemu 1.4 added some drive-mirror tunables not present
when it was first introduced in 1.3. Management apps may want
to set these in some cases (for example, without tuning
granularity down to sector size, a copy may end up occupying
more bytes than the original because an entire cluster is
copied even when only a sector within the cluster is dirty,
although tuning it down results in more CPU time to do the
copy). I haven't personally needed to use the parameters, but
since they exist, and since the new API supports virTypedParams,
we might as well expose them.
Since the tuning parameters aren't often used, and omitted from
the QMP command when unspecified, I think it is safe to rely on
qemu 1.3 to issue an error about them being unsupported, rather
than trying to create a new capability bit in libvirt.
Meanwhile, all versions of qemu from 1.4 to 2.1 have a bug where
a bad granularity (such as non-power-of-2) gives a poor message:
error: internal error: unable to execute QEMU command 'drive-mirror': Invalid parameter 'drive-virtio-disk0'
because of abuse of QERR_INVALID_PARAMETER (which is supposed to
name the parameter that was given a bad value, rather than the
value passed to some other parameter). I don't see that a
capability check will help, so we'll just live with it (and it
has since been improved in upstream qemu).
* src/qemu/qemu_monitor.h (qemuMonitorDriveMirror): Add
parameters.
* src/qemu/qemu_monitor.c (qemuMonitorDriveMirror): Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDriveMirror):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDriveMirror):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockCopyCommon): Likewise.
(qemuDomainBlockRebase, qemuDomainBlockCopy): Adjust callers.
* src/qemu/qemu_migration.c (qemuMigrationDriveMirror): Likewise.
* tests/qemumonitorjsontest.c (qemuMonitorJSONDriveMirror): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The hard part of managing the disk copy is already coded; all
this had to do was convert the XML and virTypedParameters into
the internal representation.
With this patch, all blockcopy operations that used the old
API should also work via the new API. Additional extensions,
such as supporting the granularity tunable or a network rather
than file destination, will be added as later patches.
* src/qemu/qemu_driver.c (qemuDomainBlockCopy): New function.
Signed-off-by: Eric Blake <eblake@redhat.com>
In order to implement the new virDomainBlockCopy, the existing
block copy internal implementation needs to be adjusted. The
new function will parse XML into a storage source, and parse
typed parameters into integers, then call into the same common
backend. For now, it's easier to keep the same implementation
limits that only local file destinations are suported, but now
the check needs to be explicit. Similar to qemuDomainBlockJobImpl
consuming 'vm', this code also consumes the caller's 'mirror'
description of the destination.
* src/qemu/qemu_driver.c (qemuDomainBlockCopy): Rename...
(qemuDomainBlockCopyCommon): ...and adjust parameters.
(qemuDomainBlockRebase): Adjust caller.
Signed-off-by: Eric Blake <eblake@redhat.com>
When a domain is undefined, there are options to remove it's
managed save state or snapshots. However, there's another file
that libvirt creates per domain: the NVRAM variable store file.
Make sure that the file is not left behind if the domain is
undefined.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If we end up at the cleanup lable before we've VIR_EXPAND_N the list,
then calling virQEMUCapsFreeStringList() with a NULL proplist could
theoretically deref proplist if nproplist was set. Coverity doesn't
seem to acknowledge the relationship between proplist and nproplist
assuming in virQEMUCapsFreeStringList that nproplist could be at
least 1 and thus have a null deref. It only seems to follow the
NULL proplist.
Signed-off-by: John Ferlan <jferlan@redhat.com>
With the virGetGroupList() change in place - Coverity further complains
that if we fail to virFork(), the groups will be leaked - which aha seems
to be the case. Adjust the logic to save off the -errno, free the groups,
and then return the value we saved
Signed-off-by: John Ferlan <jferlan@redhat.com>
This ends up being a very bizarre false positive. With an assist from
eblake, the claim is that mgetgroups() could return a -1 value, but yet
still have a groups buffer allocated, yet the example shown doesn't
seem to prove that.
Rather than fret about it, by adding a well placed sa_assert() on the
returned *list value we can "assure" ourselves that the mgetgroups()
failure path won't signal this condition.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If a (floppy) drive isn't selected for snapshot explicitly and is empty
don't try to snapshot it. For external snapshots this would fail as we
can't generate a name for the snapshot from an empty drive.
Reported-by: Pavel Hrdina <phrdina@redhat.com>
To express empty drive we historically use storage source with empty
path. Unfortunately NBD disks may be declared without a path.
Add a helper to wrap this logic.
The libxl driver was blindly assigning libvirt's
virDomainLifecycleAction to libxl's libxl_action_on_shutdown, when
in fact the various actions take on different values in these enums.
Introduce helpers to properly map the enum values.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Test suites using the port allocator don't want to have different
behaviour depending on whether a port is in use on the host. Add
a VIR_PORT_ALLOCATOR_SKIP_BIND_CHECK which test suites can use
to skip the bind() test. The port allocator will thus only track
ports in use by the test suite process itself. This is fine when
using the port allocator to generate guest configs which won't
actually be launched
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
I've noticed two problem with the automatically created NVRAM varstore
file. The first, even though I run qemu as root:root for some reason I
get Permission denied when trying to open the _VARS.fd file. The
problem is, the upper directory misses execute permissions, which in
combination with us dropping some capabilities result in EPERM.
The next thing is, that if I switch SELinux to enforcing mode, I get
another EPERM because the vars file is not labeled correctly. It is
passed to qemu as disk and hence should be labelled as disk. QEMU may
write to it eventually, so this is different to kernel or initrd.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
With all the changes in my previous foray into this code, I forgot to
remove the libxlDomainEventQueue(driver, event); call inside the
dom == NULL condition.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Coverity notes that if the virConnectListAllDomains returns a negative
value then the loop at the cleanup label that ends on numDomains will
have issues.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Coverity notes that if qemuMonitorGetMachines() returns a negative
nmachines value, then the code at the cleanup label will have issues.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Coverity notes that if the call to virBitmapParse() returns a negative
value, then when we jump to the error label, the call to
virCapabilitiesClearHostNUMACellCPUTopology() will have issues
with the negative nb_cpus
Signed-off-by: John Ferlan <jferlan@redhat.com>
If the virNumaGetNodeCPUs() call fails with -1, then jumping to cleanup
with 'cpus == NULL' and calling virCapabilitiesClearHostNUMACellCPUTopology
will cause issues.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In qemuProcessInitPCIAddresses() if qemuMonitorGetAllPCIAddresses()
returns a negative (or zero) value, then no need to call the
qemuProcessDetectPCIAddresses().
Signed-off-by: John Ferlan <jferlan@redhat.com>
The code compares def->forwarders when deciding to return 0 at a
couple of points, then uses "def->nfwds" as a way to index into
the def->forwarders array. That reference results in Coverity
complaining that def->forwarders being NULL was checked as part
of an arithmetic OR operation where failure could be any one 5
conditions, but that is not checked when entering the loop to
dereference the array. Changing the comparisons to use nfwds
will clear the warnings
Signed-off-by: John Ferlan <jferlan@redhat.com>
If the qemuMigrationEatCookie() fails to set mig, we jump to cleanup:
which will call qemuMigrationCancelDriveMirror() without first checking
if mig == NULL
Signed-off-by: John Ferlan <jferlan@redhat.com>
Perhaps a false positive, but since Coverity doesn't understand the
relationship between the 'count' and the 'strings', rather than leave
the chance the on input 'strings' is NULL and causes a deref - just
check for it and return
Signed-off-by: John Ferlan <jferlan@redhat.com>
If the VIR_STRDUP(exptime,...) fails, then we will jump to cleanup,
no need to check if exptime is set which causes Coverity to issue
a complaint in the virStrToLong_ll call because there wasn't a check
for a NULL value while there was one for the reference right after
the VIR_STRDUP().
Signed-off-by: John Ferlan <jferlan@redhat.com>
If we jump to cleanup before allocating the 'result', then the call
to virBlkioDeviceArrayClear will deref result causing a problem.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If we jump to cleanup before allocating 'result', then the call to
virBlkioDeviceArrayClear() could dereference result
Signed-off-by: John Ferlan <jferlan@redhat.com>
If the virJSONValueNewObject() fails, then rather than going to error
and getting a Coverity false positive since it doesn't seem to understand
the relationship between nkeywords, keywords, and values and seems to
believe calling qemuFreeKeywords will cause a NULL deref - just return NULL
Signed-off-by: John Ferlan <jferlan@redhat.com>
Adjust the parentheses in/for the waitpid loops; otherwise, Coverity
points out:
(1) Event assignment: Assigning: "waitret" = "waitpid(pid, &status, 0) == -1"
(2) Event between: At condition "waitret == -1", the value of "waitret"
must be between 0 and 1.
(3) Event dead_error_condition: The condition "waitret == -1" cannot
be true.
(4) Event dead_error_begin: Execution cannot reach this statement:
"ret = -*__errno_location();".
Signed-off-by: John Ferlan <jferlan@redhat.com>
Coverity complains that when multiplying to 32 bit values that eventually
will be stored in a 64 bit value that it's possible the math could
overflow unless one of the values being multiplied is type cast to
the proper size.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Coverity complains that checking for !domlist after setting doms = domlist
and making a deref of doms just above
It seems the call in question was intended to me made in the case that
'doms' was passed in and not when the virDomainObjListExport() call
allocated domlist and already called virConnectGetAllDomainStatsCheckACL().
Thus rather than check for !domlist - check that "doms != domlist" in
order to avoid the Coverity message.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Handle a few places where Coverity complains about the value being
unused. For two of them (Close cases) - the comments above the close
indicate there is no harm to ignore the error - so added an ignore_value.
For the other condition, added an rc check like other callers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since cd4d547576
Coverity notes that setting 'ret = -3' prior to the unconditional
setting of 'ret = 0' will cause the value to be UNUSED.
Since the comment indicates that it is expect to allow the code
to continue, just remove the ret = -3 setting.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In qemuDomainSetBlkioParameters(), Coverity points out that the calls
to qemuDomainParseBlkioDeviceStr() are slightly different and points
out there may be a cut-n-paste error.
In the first call (AFFECT_LIVE), the second parameter is "param->field";
however, for the second call (AFFECT_CONFIG), the second parameter is
"params->field". It seems the "param->field" is correct especially since
each path as a setting of "param" to "¶ms[i]". Furthermore, there
were a few more instances of using "params[i]" instead of "param->"
which I cleaned up.
Signed-off-by: John Ferlan <jferlan@redhat.com>
After a4431931 the TAP FDs ale labeled with image label instead
of the process label. On the other hand, the commit was
incomplete as a few lines above, there's still old check for the
process label presence while it should be check for the image
label instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
From time to time weird bugreports occur on the list, e.g [1].
Even though the kernel supports setns syscall, there's an older
glibc in the system that misses a wrapper over the syscall.
Hence, after the configure phase we think there's no setns
support in the system, which is obviously wrong. On the other
hand, we can't rely on linux distributions to provide newer glibc
soon. Therefore we need to introduce the wrapper on or own.
1: https://www.redhat.com/archives/libvir-list/2014-September/msg00492.html
Signed-off-by: Stephan Sachse <ste.sachse@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virProcessTranslateStatus is used on error paths that should not spoil
the returned error. As the errors are ignored, use the quiet versions of
virAsprintf to create the message.
When using split UEFI image, it may come handy if libvirt manages per
domain _VARS file automatically. While the _CODE file is RO and can be
shared among multiple domains, you certainly don't want to do that on
the _VARS file. This latter one needs to be per domain. So at the
domain startup process, if it's determined that domain needs _VARS
file it's copied from this master _VARS file. The location of the
master file is configurable in qemu.conf.
Temporary, on per domain basis the location of master NVRAM file can
be overridden by this @template attribute I'm inventing to the
<nvram/> element. All it does is holding path to the master NVRAM file
from which local copy is created. If that's the case, the map in
qemu.conf is not consulted.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
QEMU now supports UEFI with the following command line:
-drive file=/usr/share/OVMF/OVMF_CODE.fd,if=pflash,format=raw,unit=0,readonly=on \
-drive file=/usr/share/OVMF/OVMF_VARS.fd,if=pflash,format=raw,unit=1 \
where the first line reflects <loader> and the second one <nvram>.
Moreover, these two lines obsolete the -bios argument.
Note that UEFI is unusable without ACPI. This is handled properly now.
Among with this extension, the variable file is expected to be
writable and hence we need security drivers to label it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Up to now, users can configure BIOS via the <loader/> element. With
the upcoming implementation of UEFI this is not enough as BIOS and
UEFI are conceptually different. For instance, while BIOS is ROM, UEFI
is programmable flash (although all writes to code section are
denied). Therefore we need new attribute @type which will
differentiate the two. Then, new attribute @readonly is introduced to
reflect the fact that some images are RO.
Moreover, the OVMF (which is going to be used mostly), works in two
modes:
1) Code and UEFI variable store is mixed in one file.
2) Code and UEFI variable store is separated in two files
The latter has advantage of updating the UEFI code without losing the
configuration. However, in order to represent the latter case we need
yet another XML element: <nvram/>. Currently, it has no additional
attributes, it's just a bare element containing path to the variable
store file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After the previous commit, migration statistics on the source and
destination hosts are not equal because the destination updated time
statistics. Let's send the result back so that the same data can be
queried on both sides of the migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Total time of a migration and total downtime transfered from a source to
a destination host do not count with the transfer time to the
destination host and with the time elapsed before guest CPUs are
resumed. Thus, source libvirtd remembers when migration started and when
guest CPUs were paused. Both timestamps are transferred to destination
libvirtd which uses them to compute total migration time and total
downtime. Obviously, this requires the time to be synchronized between
the two hosts. The reported times are useless otherwise but they would
be equally useless if we didn't do this recomputation so don't lose
anything by doing it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When migrating a transient domain or with VIR_MIGRATE_UNDEFINE_SOURCE
flag, the domain may disappear from source host. And so will migration
statistics associated with the domain. We need to transfer the
statistics at the end of a migration so that they can be queried at the
destination host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virDomainGetJobStats gains new VIR_DOMAIN_JOB_STATS_COMPLETED flag that
can be used to fetch statistics of a completed job rather than a
currently running job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Job statistics data were tracked in several structures and variables.
Let's make a new qemuDomainJobInfo structure which can be used as a
single source of statistics data as a preparation for storing data about
completed a job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The new blockcopy API wants to reuse only a subset of the disk
hotplug parser - namely, we only care about the embedded
virStorageSourcePtr inside a <disk> XML. Strange as it may
seem, it was easier to just parse an entire disk definition,
then throw away everything but the embedded source, than it
was to disentangle the source parsing code from the rest of
the overall disk parsing function. All that I needed was a
couple of tweaks and a new internal flag that determines
whether the normally-mandatory target element can be
gracefully skipped, since everything else was already optional.
* src/conf/domain_conf.h (virDomainDiskSourceParse): New
prototype.
* src/conf/domain_conf.c (VIR_DOMAIN_XML_INTERNAL_DISK_SOURCE):
New flag.
(virDomainDiskDefParseXML): Honor flag to make target optional.
(virDomainDiskSourceParse): New function.
Signed-off-by: Eric Blake <eblake@redhat.com>
qemu now checks for invalid address type for a panic device, which is
currently implemented only to use ISA address type, thus rejecting
any other options, except for leaving XML attributes blank, in that case,
defaults are used (this behaviour remains the same from earlier verions).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1138125
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When QEMU fails during incoming migration after we successfully started
it (i.e., during Perform or Finish phase), we report a rather unhelpful
message
Unable to read from monitor: Connection reset by peer
We already have a code that takes error messages from QEMU's error
output but we disable it once QEMU successfully starts. This patch
postpones this until the end of Finish phase during incoming migration
so that we can report a much better error message:
internal error: early end of file from monitor: possible problem:
Unknown savevm section or instance '0000:00:05.0/virtio-balloon' 0
load of migration failed
https://bugzilla.redhat.com/show_bug.cgi?id=1090093
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Return failure right away when the domain object can't be looked up
instead of jumping to cleanup. This allows to remove the condition
before unlocking the domain object.
The code would lookup the snapshot object before acquiring the job. This
could lead to a crash as one thread could delete the snapshot object,
while a second thread already had the reference.
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Creating snapshots modifies the domain state. Currently we wouldn't
enter the job for certain operations although they would modify the
state. Refactor job handling so that everything is covered by an async
job.
For security type='none' libvirt according to the docs should not
generate seclabel be it for selinux or any model. So, skip the
reservation of labels when type is none.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Fairly straightforward - I got lucky that the generated functions
worked out of the box :)
* src/remote/remote_protocol.x (remote_domain_block_copy_args):
New struct.
(REMOTE_PROC_DOMAIN_BLOCK_COPY): New RPC.
* src/remote/remote_driver.c (remote_driver): Wire it up.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
The usual portability fixes; and this includes a fix that adds
a new syntax check for double semicolons (commit 28de556 fixed
some, but gnulib found a better check).
* .gnulib: Update to latest.
* src/xenconfig/xen_common.c (xenFormatConfigCommon): Fix offender.
Signed-off-by: Eric Blake <eblake@redhat.com>
Since 9f781da69d
Resolve a libvirtd crash in virStoragePoolSourceFindDuplicate()
when there is an existing SCSI pool defined with adapter type as
'scsi_host' and defining a new SCSI pool with adapter type as
'fc_host' and parent attribute missing or vice versa.
For example, if there is an existing SCSI pool with adapter type
as 'scsi_host' defined using the following XML
<pool type='scsi'>
<name>TEST_SCSI_POOL</name>
<source>
<adapter type='scsi_host' name='scsi_host1'/>
</source>
<target>
<path>/dev/disk/by-path</path>
</target>
</pool>
When defining another SCSI pool with adapter type as 'fc_host' using the
following XML will crash libvirtd
<pool type='scsi'>
<name>TEST_SCSI_FC_POOL</name>
<source>
<adapter type='fc_host' wwnn='1234567890abcdef' wwpn='abcdef1234567890'/>
</source>
<target>
<path>/dev/disk/by-path</path>
</target>
</pool>
Same is true for the reverse case as well where there exists a SCSI pool
with adapter type as 'fc_host' and another SCSI pool is defined with
adapter type as 'scsi_host'.
This happens because for fc_host 'name' is optional attribute whereas for
scsi_host its mandatory. However the check in libvirt for finding duplicate
storage pools didn't take that into account while comparing
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
To date, anyone performing a block copy and pivot ends up with
the destination being treated as <disk type='file'>. While this
works for data access for a block device, it has at least one
noticeable shortcoming: virDomainGetBlockInfo() reports allocation
differently for block devices visited as files (the size of the
device) than for block devices visited as <disk type='block'>
(the maximum sector used, as reported by qemu); and this difference
is significant when trying to manage qcow2 format on block devices
that can be grown as needed.
Of course, the more powerful virDomainBlockCopy() API can already
express the ability to set the <disk> type. But a new API can't
be backported, while a new flag to an existing API can; and it is
also rather inconvenient to have to resort to the full power of
generating XML when just adding a flag to the older call will do
the trick. So this patch enhances blockcopy to let the user flag
when the resulting XML after the copy must list the device as
type='block'.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_REBASE_COPY_DEV):
New flag.
* src/libvirt.c (virDomainBlockRebase): Document it.
* tools/virsh-domain.c (opts_block_copy, blockJobImpl): Add
--blockdev option.
* tools/virsh.pod (blockcopy): Document it.
* src/qemu/qemu_driver.c (qemuDomainBlockRebase): Allow new flag.
(qemuDomainBlockCopy): Remember the flag, and make sure it is only
used on actual block devices.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
While reviewing the new virDomainBlockCopy API, Peter Krempa
pointed out that our existing design of using MiB/s for block
job bandwidth is rather coarse, especially since qemu tracks
it in bytes/s; so virDomainBlockCopy only accepts bytes/s.
But once the new API is implemented for qemu, we will be in
the situation where it is possible to set a value that cannot
be accurately reflected back to the user, because the existing
virDomainGetBlockJobInfo defaults to the coarser units.
Fortunately, we have an escape hatch; and one that has already
served us well in the past: we can use the flags argument to
specify which scale to use (see virDomainBlockResize for prior
art). This patch fixes the query side of the API; made easier
by previous patches that split the query side out from the
modification code. Later patches will address the virsh
interface, as well retrofitting all other blockjob APIs to
also accept a flag for toggling bandwidth units.
* include/libvirt/libvirt.h.in (_virDomainBlockJobInfo)
(VIR_DOMAIN_BLOCK_COPY_BANDWIDTH): Document sizing issues.
(virDomainBlockJobInfoFlags): New enum.
* src/libvirt.c (virDomainGetBlockJobInfo): Document new flag.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJobInfo): Add parameter.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJobInfo): Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockJobInfo):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJobInfo)
(qemuMonitorJSONGetBlockJobInfoOne): Likewise. Don't scale here.
* src/qemu/qemu_migration.c (qemuMigrationDriveMirror): Update
callers.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl): Likewise.
(qemuDomainGetBlockJobInfo): Likewise, and support new flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
The previous patch hoisted some bounds checks to the callers;
but someone that is not aware of the hoisted check could now
try passing an integer between LLONG_MAX and ULLONG_MAX. As a
safety measure, add new json conversion modes that let libvirt
error out early instead of pass bad numbers to qemu, if the
caller ever makes a mistake due to later refactoring.
Convert the various blockjob QMP calls to use the new modes,
and switch some of them to be optional (QMP has always supported
an omitted "speed" the same as "speed":0, for everything except
block-job-set-speed).
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONMakeCommandRaw):
Add 'j'/'y' and 'J'/'Y' to error out on negative input.
(qemuMonitorJSONDriveMirror, qemuMonitorJSONBlockCommit)
(qemuMonitorJSONBlockJob): Use it.
Signed-off-by: Eric Blake <eblake@redhat.com>
qemu treats blockjob bandwidth as a 64-bit number, in the units
of bytes/second. But we stupidly modeled block job bandwidth
after migration bandwidth, which in turn was an 'unsigned long'
and therefore subject to 32-bit vs. 64-bit interpretations, and
with a scale of MiB/s. Our code already has to convert between
the two scales, and report overflow as appropriate; although
this conversion currently lives in the monitor code. In fact,
our conversion code limited things to 63 bits, because we
checked against LLONG_MAX and reject what would be negative
bandwidth if treated as signed.
On the bright side, our use of MiB/s means that even with a
32-bit unsigned long, we still have no problem representing a
bandwidth of 2GiB/s, which is starting to be more feasible as
10-gigabit or even faster interfaces are used. And once you
get past the physical speeds of existing interfaces, any larger
bandwidth number behaves the same - effectively unlimited.
But on the low side, the granularity of 1MiB/s tuning is rather
coarse. So the new virDomainBlockJob API decided to go with
a direct 64-bit bytes/sec number instead of the scaled number
that prior blockjob APIs had used. But there is no point in
rounding this number to MiB/s just to scale it back to bytes/s
for handing to qemu.
In order to make future code sharing possible between the old
virDomainBlockRebase and the new virDomainBlockCopy, this patch
moves the scaling and overflow detection into the driver code.
Several of the block job calls that can set speed are fed
through a common interface, so it was easier to adjust all block
jobs at once, for consistency. This patch is just code motion;
there should be no user-visible change in behavior.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJob)
(qemuMonitorBlockCommit, qemuMonitorDriveMirror): Change
parameter type and scale.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob)
(qemuMonitorBlockCommit, qemuMonitorDriveMirror): Move scaling
and overflow detection...
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl)
(qemuDomainBlockRebase, qemuDomainBlockCommit): ...here.
(qemuDomainBlockCopy): Use bytes/sec.
Signed-off-by: Eric Blake <eblake@redhat.com>
Another layer of overly-multiplexed code that deserves to be
split into obviously separate paths for query vs. modify.
This continues the cleanup started in commit cefe0ba.
In the process, make some tweaks to simplify the logic when
parsing the JSON reply. There should be no user-visible
semantic changes.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJob): Drop parameter.
(qemuMonitorBlockJobInfo): New prototype.
(BLOCK_JOB_INFO): Drop enum.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockJob)
(qemuMonitorJSONBlockJobInfo): Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Split...
(qemuMonitorBlockJobInfo): ...into second function.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJob): Move
block info portions...
(qemuMonitorJSONGetBlockJobInfo): ...here, and rename...
(qemuMonitorJSONBlockJobInfo): ...and export.
(qemuMonitorJSONGetBlockJobInfoOne): Alter return semantics.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl, qemuDomainGetBlockJobInfo): Adjust
callers.
* src/qemu/qemu_migration.c (qemuMigrationDriveMirror)
(qemuMigrationCancelDriveMirror): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit fba6bc4 introduced support for the 'invtsc' feature,
which blocks migration. We should not include it in the
host-model CPU by default, because it's intended to be used
with migration.
https://bugzilla.redhat.com/show_bug.cgi?id=1138221
https://bugzilla.redhat.com/show_bug.cgi?id=1027096#c8
There are two ways in which security model can make it way into
<seclabel/>. One is as the @model attribute, the second one is
via security_driver knob in qemu.conf. Then, while parsing
<seclabel/> several checks and fix ups of old, stale combinations
are performed. However, iff @model is specified. They are not
done in the latter case. So it's still possible to feed libvirt
with senseless combinations (if qemu.conf is adjusted correctly).
One example of a seclabel that needs some adjustment (in case
security_driver=none in qemu.conf) is:
<seclabel type='dynamic' relabel='yes'/>
The fixup code is copied from virSecurityLabelDefParseXML
(covering the former case) into virSecurityLabelDefsParseXML
(which handles the latter case).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The qemu implementation for virDomainGetBlockJobInfo() has a
minor bug: it grabs the qemu job with intent to QEMU_JOB_MODIFY,
which means it cannot be run in parallel with any other
domain-modifying command. Among others, virDomainBlockJobAbort()
is such a modifying command, and it defaults to being
synchronous, and can wait as long as several seconds to ensure
that the job has actually finished. Due to the job rules, this
means a user cannot obtain status about the job during that
timeframe, even though we know that some client management code
exists which is using a polling loop on status to see when a job
finishes.
This bug has been present ever since blockpull support was first
introduced (commit b976165, v0.9.4 in Jul 2011), all because we
stupidly tried to cram too much multiplexing through a single
helper routine, but was made worse in 97c59b9 (v1.2.7) when
BlockJobAbort was fixed to wait longer. It's time to disentangle
some of the mess in qemuDomainBlockJobImpl, and in the process
relax block job query to use QEMU_JOB_QUERY, since it can safely
be used in parallel with any long running modify command.
Technically, there is one case where getting block job info can
modify domain XML - we do snooping to see if a 2-phase job has
transitioned into the second phase, for an optimization in the
case of old qemu that lacked an event for the transition. I
claim this optimization is safe (the jobs are all about modifying
qemu state, not necessarily xml state); but if it proves to be
a problem, we could use the difference between the capabilities
QEMU_CAPS_BLOCKJOB_{ASYNC,SYNC} to determine whether we even
need snooping, and only request a modifying job in the case of
older qemu.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Move info
handling...
(qemuDomainGetBlockJobInfo): ...here, and relax job type.
(qemuDomainBlockJobAbort, qemuDomainBlockJobSetSpeed)
(qemuDomainBlockRebase, qemuDomainBlockPull): Adjust callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
The existing virDomainBlockRebase code rejected the combination of
_RELATIVE and _COPY flags, but only by accident. It makes sense
to add support for the combination someday, at least for the case
of _SHALLOW and not _REUSE_EXT; but to implement it, libvirt would
have to pre-create the file with a relative backing name, and I'm
not ready to code that in yet.
Meanwhile, the code to forward on to the block copy code is getting
longer, and reorganizing the function to have the block pull done
early makes it easier to add even more block copy prep code.
This patch should have no semantic difference other than the quality
of the error message on the unsupported flag combination. Pre-patch:
error: unsupported flags (0x10) in function qemuDomainBlockCopy
Post-patch:
error: argument unsupported: Relative backing during copy not supported yet
* src/qemu/qemu_driver.c (qemuDomainBlockRebase): Reorder code,
and improve error message of relative copy.
Signed-off-by: Eric Blake <eblake@redhat.com>
Our style overwhelmingly uses hanging braces (the open brace
hangs at the end of the compound condition, rather than on
its own line), with the primary exception of the top level function
body. Fix the few remaining outliers, before adding a syntax
check in a later patch.
* src/interface/interface_backend_netcf.c (netcfStateReload)
(netcfInterfaceClose, netcf_to_vir_err): Correct use of { in
compound statement.
* src/conf/domain_conf.c (virDomainHostdevDefFormatSubsys)
(virDomainHostdevDefFormatCaps): Likewise.
* src/network/bridge_driver.c (networkAllocateActualDevice):
Likewise.
* src/util/virfile.c (virBuildPathInternal): Likewise.
* src/util/virnetdev.c (virNetDevGetVirtualFunctions): Likewise.
* src/util/virnetdevmacvlan.c
(virNetDevMacVLanVPortProfileCallback): Likewise.
* src/util/virtypedparam.c (virTypedParameterAssign): Likewise.
* src/util/virutil.c (virGetWin32DirectoryRoot)
(virFileWaitForDevices): Likewise.
* src/vbox/vbox_common.c (vboxDumpNetwork): Likewise.
* tests/seclabeltest.c (main): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
I'm about to add a syntax check that enforces our documented
HACKING style of always using matching {} on if-else statements.
This patch focuses on drivers that had several issues.
* src/lxc/lxc_fuse.c (lxcProcGetattr, lxcProcReadMeminfo): Correct
use of {}.
* src/lxc/lxc_driver.c (lxcDomainMergeBlkioDevice): Likewise.
* src/phyp/phyp_driver.c (phypConnectNumOfDomainsGeneric)
(phypUUIDTable_Init, openSSHSession, phypStoragePoolListVolumes)
(phypConnectListStoragePools, phypDomainSetVcpusFlags)
(phypStorageVolGetXMLDesc, phypStoragePoolGetXMLDesc)
(phypConnectListDefinedDomains): Likewise.
* src/vbox/vbox_common.c (vboxAttachSound, vboxDumpDisplay)
(vboxDomainRevertToSnapshot, vboxDomainSnapshotDelete): Likewise.
* src/vbox/vbox_tmpl.c (vboxStorageVolGetXMLDesc): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
We lacked of HOME environment variable,
set 'HOME=/' as default.
The kernel sets up $HOME for the init process.
Therefore any init can assume that $HOME is set.
libvirt currently violates that implicit rule.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
When FIPS mode is on, gnutls_dh_params_generate2 will fail if 1024 is
specified as the prime's number of bits, a bigger value works in both
cases.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Memory is allocated for 'mnt_src' by VIR_STRDUP in the loop. Next
loop it will be allocated again. So we need to free 'mnt_src'
before continue the loop.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Commit 0e1a1a8c introduced umask for virCommand, but the variables
used emit a warning on older compilers about shadowed global
declaration.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add umask to _virCommand, allow user to set umask to command.
Set umask(002) to qemu process to overwrite the default umask
of 022 set by many distros, so that unix sockets created for
virtio-serial has expected permissions.
Fix problem reported here:
https://sourceware.org/bugzilla/show_bug.cgi?id=13078#c11https://bugzilla.novell.com/show_bug.cgi?id=888166
To use virtio-serial device, unix socket created for chardev with
default umask(022) has insufficient permissions.
e.g.:
-device virtio-serial \
-chardev socket,path=/tmp/foo,server,nowait,id=foo \
-device virtserialport,chardev=foo,name=org.fedoraproject.port.0
srwxr-xr-x 1 qemu qemu 0 21. Jul 14:19 /tmp/somefile.sock
Other users in the same group (like real user, test engines, etc)
cannot write to this socket.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, there is one flag passed in during macvtap creation
(withTap) -- Let's convert this field to an unsigned int flag
field for future expansion.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The cleanup in commit cf976d9d used secdef->label to label the tap
FDs, but that is not possible since it's process-only label (svirt_t)
and not a object label (e.g. svirt_image_t). Starting a domain failed
with EPERM, but simply using secdef->imagelabel instead of
secdef->label fixes it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since 1b807f92, connecting with virsh to an already running session
libvirtd fails with:
$ virsh list --all
error: failed to connect to the hypervisor
error: no valid connection
error: Failed to connect socket to
'/run/user/1000/libvirt/libvirt-sock': Transport endpoint is already
connected
This is caused by a logic error in virNetSocketNewConnectUnix: even if
the connection to the daemon socket succeeded, we still try to spawn the
daemon and then connect to it.
This commit changes the logic to not try to spawn libvirtd if we
successfully connected to its socket.
Most of this commit is whitespace changes, use of -w is recommended to
look at it.
Currently, after calling commands to create a new volumes,
virStorageBackendZFSCreateVol calls virStorageBackendZFSFindVols that
calls virStorageBackendZFSParseVol.
virStorageBackendZFSParseVol checks if a volume already exists by
trying to get it using virStorageVolDefFindByName.
For a just created volume it returns NULL, so volume is reported as
new and appended to pool->volumes. This causes a volume to be listed
twice as storageVolCreateXML appends this new volume to the list as
well.
Fix that by passing a new volume definition to
virStorageBackendZFSParseVol so it could determine if it needs to add
this volume to the list.
In qemuDomainSnapshotCreateDiskActive() if we jumped to cleanup from a
failed actions = virJSONValueNewArray(), then 'cfg' would be NULL.
So just return -1, which in turn removes the need for cleanup:
Coverity complained about the following:
(3) Event ptr_arith:
Performing pointer arithmetic on "cur_fd" in expression "cur_fd++".
130 return virNetServerServiceNewFD(*cur_fd++,
The complaint is that pointer arithmetic taking place instead of the
expected auto increment of the variable... Adding some well placed
parentheses ensures our order of operation.
For virtio-blk-pci disks with the disk iothread attribute that are
running the correct emulator, add the "iothread=iothread#" to the
-device command line in order to enable iothreads for the disk as
long as the command is available, the disk iothread value provided is
valid, and is supported for the disk device being added
Add a new disk "driver" attribute "iothread" to be parsed as the thread
number for the disk to use. In order to more easily facilitate the usage
and configuration of the iothread, a "zero" for the attribute indicates
iothreads are not supported for the device and a positive value indicates
the specific thread to try and use.
Add a new capability to ensure the iothreads feature exists for the qemu
emulator being run - requires the "query-iothreads" QMP command. Using the
domain XML add correspoding command argument in order to generate the
threads. The iothreads will use a name space "iothread#" where, the
future patch to add support for using an iothread to a disk definition to
merely define which of the available threads to use.
Add tests to ensure the xml/argv processing is correct. Note that no
change was made to qemuargv2xmltest.c as processing the -object element
would require knowing more than just iothreads.
Introduce XML to allowing adding iothreads to the domain. These can be
used by virtio-blk-pci devices in order to assign a specific thread to
handle the workload for the device. The iothreads are the official
implementation of the virtio-blk Data Plane that's been in tech preview
for QEMU.
Coverity noted that all callers to libxlDomainEventQueue() could ensure
the second parameter (event) was true before calling except this case.
As I look at the code and how events are used - it seems that prior to
generating an event for the dom == NULL condition, the resume/suspend
event should be queue'd after the virDomainSaveStatus() call which will
goto cleanup and queue the saved event anyway.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Implement the API function for virDomainListGetStats and
virConnectGetAllDomainStats in a modular way and implement the
VIR_DOMAIN_STATS_STATE group of statistics.
Although it may look like the function looks universal I'd rather not
expose it to other drivers as the coming stats groups are likely to do
qemu specific stuff to obtain the stats.
One useless warning, but the other one rather pertinent. On entry
the 'trans' variable is initialized to VIR_DOMAIN_DISK_TRANS_DEFAULT.
When the "trans" was found in the parsing loop it def->geometry.trans
was assigned to the return from virDomainDiskGeometryTransTypeFromString
and then 'trans' was used to do the comparison to see if it was valid.
So remove 'trans' and use def->geometry.trans properly
In libxlDomainMigrationPrepare() if the uri_in is false, then
'hostname' is allocated and used "generically" in the routine,
but not freed. Conversely, if uri_in is true, then a uri is
allocated and hostname is set to the uri->hostname value and
likewise generically used.
At function exit, hostname wasn't free'd in the !uri_in path,
so that was added. To just make it clearer on usage the else
path became the call to virURIFree() although I suppose technically
it didn't have to since it would be a call using (NULL)
Coverity determined that on error path that 'mach' wouldn't be free'd
Since virCapabilitiesFreeGuestMachine() isn't globally available, we'll
insert first and then if the VIR_STRDUP's fail they it will eventually
cause the 'mach' to be freed in the error path
Coverity found that on error paths, the 'arg' value wasn't be cleaned
up. Followed the example in qemuAgentSetVCPUs() where upon successful call
to qemuAgentCommand() the 'cpus' is set to NULL; otherwise, when cleanup
occurs the free the memory for 'arg'
In function virQEMUCapsParseMachineTypesStr, VIR_STRNDUP allocates
memory for 'name' in {do,while} loop. If 'name' isn't freed before
'continue', its memory will be allocated again in the next loop.
In this case the memory allocated for 'name' in privious loop is
useless and not freed. Free it before continue this loop to fix that.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Coverity complains that checking for domain->def being non NULL in the
if (live) path of virDomainObjAssignDef() would be unnecessary or a
NULL deref since the call to virDomainObjIsActive() would already
dereference domain->def when checking if the def->id field was != -1.
Checked all callers to virDomainObjAssignDef() and each at some point
dereferences (vm)->def->{field} prior to calling when live is true.
In qemuNetworkIfaceConnect() a call to virNetDevBandwidthSet() is
made where the function prototype requires the first parameter
(net->ifname) to be non NULL. Coverity complains that the subsequent
non NULL check for net->ifname prior to the next call gets flagged as
an unnecessary check. Resolve by removing the extra check
In virDomainActualNetDefFormat() a call to virDomainNetGetActualType(def)
was made before a check for (!def) a few lines later. This triggered
Coverity to note the possible NULL deref. Just moving the initialization
to after the !def checks resolves the issue
There were two occurrances of attempting to initialize actualType by
calling virStorageSourceGetActualType(src) prior to a check if (!src)
resulting in Coverity complaining about the possible NULL dereference
in virStorageSourceGetActualType() of src.
Resolve by moving the actualType setting until after checking !src
If virDomainDiskDefFree(disk) is called in 'skipdisk:', then it's possible
to either return to skipdisk without reallocating a new disk (via the if
condition just prior) or to end the loop having deleted the disk. Since
virDomainDiskDefFree() does not pass by reference, disk isn't changed in
this context, thus the possible issue.
There were two warnings in this module
If the VIR_ALLOC_N(def->serials, 1) fails, then a virDomainChrDefFree(chr)
is called and we jump to cleanup which makes the same call. Just remove
the one after VIR_ALLOC_N()
In the label "skipnic:" a virDomainNetDefFree(net) is made; however, if
in going back to the top of the loop we jump back down to skipnic for any
reason, the call will attempt to free an already freed structure since
"net" was not passed by reference to virDomainNetDefFree(). Just set
net = NULL in skipnic: to resolve the issue.
Coverity complains that calling virNetworkDefFree(def), then jumping
to the cleanup: label which calls virNetworkDefFree(def) could result
in a double_free. Just remove the call from the if statement.
Since times when vbox moved to the daemon (due to some licensing
issue) the subdrivers that vbox implements were registered, but not
opened since our generic subdrivers took priority. I've tried to fix
this in 65b7d553f3 but it was not correct. Apparently moving
vbox driver registration upfront changes the default connection URI
which makes some users sad. So, this commit breaks vbox into pieces
and register vbox's network and storage drivers first, and vbox driver
then at the end. This way, the vbox driver is registered in the order
it always was, but its subdrivers are registered prior the generic
ones.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There's this unwritten rule in libvirt that vir_function is translated
into virFunction when needed (e.g. in remote protocol definition,
python, ...). Up till now we ignored such translation in driver module
loading and did fine. Well, we didn't have any module with an
underscore in its name. But this will change in next commit. The
problem is, once an a module is dlopen()-ed, we derive register
function name from its name. So instead of "driver_subdriverRegister"
do some magic to turn that into "driverSubdriverRegister".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While working on virDomainBlockCopy, I noticed we had a verify()
concerning internal XML flags that was incomplete after several
recent flag additions; move that up higher in the code to make it
harder to forget to modify on the next flag addition. Adjust
some formatting while at it.
* src/conf/domain_conf.c (verify): Move closer to internal flag
definitions. Cover missing flags ALLOW_ROM and ALLOW_BOOT.
Signed-off-by: Eric Blake <eblake@redhat.com>
In qemuDomainRevertToSnapshot(), it will check snap->def->state.
But when the state is PMSUSPENDED/NOSTATE/BLOCKED, it forgets to
call qemuDomainObjEndJob.
https://bugzilla.redhat.com/show_bug.cgi?id=1134154
Bug introduced in commit 1e833899.
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Let's fix this before we bake in a painful API. Since we know
that we have exactly one non-negative fd on success, we might
as well return the fd directly instead of forcing the user to
pass in a pointer. Furthermore, I found some memory and fd
leaks while reviewing the code - the idea is that on success,
libvirtd will have handed two fds in two different directions:
one to qemu, and one to the RPC client.
* include/libvirt/libvirt.h.in (virDomainOpenGraphicsFD): Drop
unneeded parameter.
* src/driver.h (virDrvDomainOpenGraphicsFD): Likewise.
* src/libvirt.c (virDomainOpenGraphicsFD): Adjust interface to
return fd directly.
* daemon/remote.c (remoteDispatchDomainOpenGraphicsFd): Adjust
semantics.
* src/qemu/qemu_driver.c (qemuDomainOpenGraphicsFD): Likewise,
and plug fd leak.
* src/remote/remote_driver.c (remoteDomainOpenGraphicsFD):
Likewise, and plug memory and fd leak.
Signed-off-by: Eric Blake <eblake@redhat.com>
This commit (finally) adds the virDomainBlockCopy API, with the
intent that it will provide more power to the existing 'virsh
blockcopy' command.
'virsh blockcopy' was first added in Apr 2012 (v0.9.12), which
corresponds to the upstream qemu 1.2 timeframe. It was done as
a hack on top of the existing virDomainBlockRebase() API call,
for two reasons: 1) it was targetting a feature that landed first
in downstream RHEL qemu, but had not stabilized in upstream qemu
at the time (and indeed, 'drive-mirror' only landed upstream in
qemu 1.3 with slight differences to the first RHEL attempt,
and later gained further parameters like granularity and buf-size
that are also worth exposing), and 2) extending an existing API
allowed it to be backported without worrying about bumping .so
versions. A virDomainBlockCopy() API was proposed at that time
[1], but we decided not to accept it into libvirt until after
upstream qemu stabilized, and it ended up getting scrapped.
Whether or not RHEL should have attempted adding a new feature
without getting it upstream first is a debate that can be held
another day; but enough time has now elapsed that we are ready to
do the interface cleanly.
[1] https://www.redhat.com/archives/libvir-list/2012-April/msg00768.html
Delaying the creation of a clean API until now has also had a
benefit: we've only recently learned of a few shortcomings in the
original design: 1) it is unable to target a network destination
(such as a gluster volume) because it hard-coded the assumption
that the destination is a local file name. Because of all the
refactoring we've done to add virStorageSourcePtr, we are in a
better position to declare an API that parses XML describing a
host storage source as the copy destination, which was not
possible had we implemented virDomainBlockCopy as it had been
originally envisioned (although a network target will have to wait
until a later libvirt release compared to the API addition to
actually be implemented). 2) the design of using MiB/sec as the
bandwidth throttle is rather coarse; qemu is actually tuned to
bytes/second, and libvirt is preventing access to that level of
detail. A later patch will add flags to existing block job API
that can request bytes/second instead of back-compat MiB/s, but as
this is a new API, we can get it right to begin with.
At least I had the foresight to create 'virsh blockcopy' as a
separate command at the UI level (commit 1f06c00) rather than
leaking the underlying API overload of virDomainBlockRebase onto
shell users.
A further note on the bandwidth option: virTypedParameters
intentionally lacks unsigned long (since variable-width
interaction between mixed 32- vs. 64-bit client/server setups is
nasty), but we have to deal with the fact that we are interacting
with existing older code that mistakenly chose unsigned long
bandwidth at a point before we decided to prohibit it in all new
API. The typed parameter is therefore unsigned long long, but
the implementation (in a later patch) will have to do overflow
detection on 32-bit platforms, as well as capping the value to
match the LLONG_MAX>>20 cap of the existing MiB/s interfaces.
* include/libvirt/libvirt.h.in (virDomainBlockCopy): New API.
(virDomainBlockJobType, virConnectDomainEventBlockJobStatus):
Update related documentation.
* src/libvirt.c (virDomainBlockCopy): Implement it.
* src/libvirt_public.syms (LIBVIRT_1.2.8): Export it.
* src/driver.h (_virDriver): New driver callback.
Signed-off-by: Eric Blake <eblake@redhat.com>
The motivation for this API is that management layers that use libvirt
usually poll for statistics using various split up APIs we currently
provide. To get all the necessary stuff, the app needs to issue a lot of
calls and aggregate the results.
The APIs I'm introducing here:
1) Returns data in a format that we can expand in the future and is
(pseudo) hierarchical. The data is returned as typed parameters where
the fields are constructed as dot-separated strings containing names and
other stuff in a list of typed params.
2) Stats for multiple (all) domains can be queried at once and are
returned in one call. This will decrease the overhead necessary to issue
multiple calls per domain multiplied by the count of domains.
3) Selectable (bit mask) fields in the returned format. This will allow
to retrieve only specific stats according to the app's need.
The stats groups will be enabled using a bit field @stats passed as the
function argument. A few sample stats groups that this API will support:
VIR_DOMAIN_STATS_STATE
VIR_DOMAIN_STATS_CPU
VIR_DOMAIN_STATS_BLOCK
VIR_DOMAIN_STATS_INTERFACE
(Note that this is only an example, the initial implementation supports
only VIR_DOMAIN_STATS_STATE while others will be added later.)
the returned typed params will use the following scheme
state.state = VIR_DOMAIN_RUNNING
state.reason = VIR_DOMAIN_RUNNING_BOOTED (the actual values according to
the enum)
cpu.count = 8
cpu.0.state = running
cpu.0.time = 1234
According to docs/schemas/domaincommon.rng and _virDomainBlockIoTuneInfo
all the iotune values are interpreted as unsigned long long, however
according to qemu_monitor_json.c, qemu silently truncates numbers
larger than LLONG_MAX. There's really not much of a usage for such
large numbers anyway yet. This patch provides the same overflow
check during a domain start as it does during setting
a blkdeviotune element in qemu_driver.c and thus reports an error when
a larger number than LLONG_MAX is detected.
https://bugzilla.redhat.com/show_bug.cgi?id=1131876
QEMU 2.1 added support for the kvm=off option to the -cpu command,
allowing the KVM hypervisor signature to be hidden from the guest.
This enables disabling of some paravirualization features in the
guest as well as allowing certain drivers which test for the
hypervisor to load. Domain XML syntax is as follows:
<domain type='kvm>
...
<features>
...
<kvm>
<hidden state='on'/>
</kvm>
</features>
...
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Commit b55cc5f4e did a shallow copy of libxl_{sdl,vnc}_info from the
domain config to the build info, which resulted in double-freeing
strings contained in the structures during cleanup, which later
resulted in a libvirtd crash. Fix by performing a deep copy of the
structure, VIR_STRDUP'ing embedded strings instead of simply copying
their pointers.
Fixes the following issue reported on the libvirt dev list
https://www.redhat.com/archives/libvir-list/2014-August/msg01112.html
I noticed a line 'int nparams = 0;;' in remote_dispatch.h, and
tracked down where it was generated. While at it, I found a
couple of other double semicolons. Additionally, I noticed that
commit df0b57a95 left a stale reference to the file name
remote_dispatch_bodies.h.
* src/conf/numatune_conf.c (virDomainNumatuneNodeParseXML): Drop
empty statement.
* tests/virdbustest.c (testMessageStruct, testMessageSimple):
Likewise.
* src/rpc/gendispatch.pl (remote_dispatch_bodies.h): Likewise, and
update stale comments.
Signed-off-by: Eric Blake <eblake@redhat.com>
When trying to set an invalid value into iotune element, standard
behavior was to not report any error, rather to reset all affected
subelements of the iotune element back to 0 which results in ignoring
those particular subelements by XML generator. Patch further
examines the return code of the virXPathULongLong function
and in case of an invalid non-integer value raises an error.
Fixed to preserve consistency with invalid value checking
of other elements.
Resolves https://bugzilla.redhat.com/show_bug.cgi?id=1131811
The commit "f5b4c141" introduced new "force" parameter
for "virFDStreamOpenFileInternal" but forget to update
one call of that function.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
virStorageBackendVolDownloadLocal and virStorageBackendVolUploadLocal
use virFDStreamOpenFile function to work with the volume fd.
virFDStreamOpenFile calls virFDStreamOpenFileInternal that implements
handling of the non-blocking I/O. If a file is not a character device and
not a fifo, it uses libvirt_iohelper.
On FreeBSD, it doesn't work as expected because disk devices (including
ZFS volumes) are exposed as character devices, and ZFS volumes do not
support open(2) with O_NONBLOCK.
To overcome this, introduce a forceIOHelper flag to
virFDStreamOpenFileInternal that forces using libvirt_iohelper. And
introduce virFDStreamOpenBlockDevice that calls
virFDStreamOpenFileInternal with the forceIOHelper set to true.
virFDStreamOpenInternal terminates if virSetNonBlock fails. As
virSetNonBlock uses gnulib's set_nonblocking_flag that sets errno,
call virReportSystemError() to let user know the reason of fail.
Commit b606bbb41 reminded me that any time we drop locks to run
back-to-back guest interaction commands, we have to check that
the guest didn't disappear in between the two commands. A quick
audit found a couple of spots that were missing this check.
* src/qemu/qemu_driver.c (qemuDomainShutdownFlags)
(qemuDomainSetVcpusFlags): Check that domain is still up.
Signed-off-by: Eric Blake <eblake@redhat.com>
Since '337a13628' - Coverity complains that 'net' is VIR_ALLOC()'d, but
on various 'cleanup' exit paths from the code there is no corresponding
cleanup.
Since '1b807f92d' - Coverity complains that in the error paths of
both virFork() and virProcessWait() that the 'passfd' will not be closed.
Added the VIR_FORCE_CLOSE(passfd) and initialized it to -1.
Also noted that variable 'buf' was never really used - so I removed it
When trying to set numatune mode directly using virsh numatune command,
correct error is raised, however numatune structure was not deallocated,
thus resulting in creating an empty numatune element in the guest XML,
if none was present before. Running the same command aftewards results
in a successful change with broken XML structure. Patch fixes the
deallocation problem as well as checking for invalid attribute
combination VIR_DOMAIN_NUMATUNE_PLACEMENT_AUTO + a nonempty nodeset.
Resolves https://bugzilla.redhat.com/show_bug.cgi?id=1129998
The 'min_guarantee' is used by VMware ESX and OpenVZ drivers,
with qemu however, libvirt should report error when starting a domain,
because this element is not used.
Resolves https://bugzilla.redhat.com/show_bug.cgi?id=1122455
On some places in the libvirt code we have:
f(a,z)
instead of
f(a, z)
This trivial patch fixes couple of such occurrences.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Libvirt measures vram in Kbytes, not in bytes, so calculation
of Mbytes was incorrect. PCS server can take vram argument
with units, so I added K postfix to make params a little bit clearer.
That sets a new flag, but that flag does mean the child will get
LISTEN_FDS and LISTEN_PID environment variables properly set and
passed FDs reordered so that it corresponds with LISTEN_FDS (they must
start right after STDERR_FILENO).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
It's just a wrapper around NewFD and NewUNIX that selects the right
option and increments the number of used FDs.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since not only systemd can do this (we'll be doing it as well few
patches later), change 'systemd' to 'caller' and fix LISTEN_FDS to
LISTEN_PID where applicable.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When formatting the forward mode addresses or interfaces the switch was
done based on the type of the network rather than of the type of the
individual <interface>/<address> element. In case a user would specify
an incorrect network type ("passhtrough") with <address> elements,
libvirtd would crash as it would attempt to format an <interface>.
Use the type of the individual element to format the XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1132347
https://bugzilla.redhat.com/show_bug.cgi?id=1078126
Using 'virsh attach-device --config' (or --persistent) to attach a
file backed lun device will succeed; however, subsequent domain restarts
will result in failure because the configuration of a file backed lun
is not supported.
Although allowing 'illegal configurations' is something that can be
allowed, it may not be practical in this case. Generally, when attaching
a device to a domain means the domain must be running. A way around
this is using the --config (or --persistent) option. When an attach
is done to a running domain, a temporary configuration is modified
first followed by the live update. The live update will make a number
of disk validity checks when building the qemu command to attach the
disk. If any fail, then change is rejected.
Rather than allow a potentially illegal combination, adjust the code
in the configuration path to make the same checks as the running path
will make with respect to disk validity checks. This way we avoid
having the potential for some subsequent start/reboot to fail because
an illegal combination was allowed.
NB: The live path still checks the configuration since it is possible
to just do --live guest modification...
Since vbox driver rewrite the virDriver structure init moved from
vbox_tmpl.c into vbox_common.c. However, our hvsupport.pl script
doesn't count with that. It still parses vbox_tmp.c and looks for
virDriver structure which is not found there anymore. As a result,
at hvsupport page is seems like vbox driver doesn't support
anything.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In case the host has 2 or more NUMA nodes, we fetch CPU map for each
node. However, we need to free the CPU map in between loops:
==29513== 96 (72 direct, 24 indirect) bytes in 3 blocks are definitely lost in loss record 951 of 1,264
==29513== at 0x4C2A700: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==29513== by 0x52AD24B: virAlloc (viralloc.c:144)
==29513== by 0x52AF0E6: virBitmapNew (virbitmap.c:78)
==29513== by 0x52FB720: virNumaGetNodeCPUs (virnuma.c:294)
==29513== by 0x53C700B: nodeCapsInitNUMA (nodeinfo.c:1886)
==29513== by 0x11759708: vboxCapsInit (vbox_common.c:398)
==29513== by 0x11759CC4: vboxConnectOpen (vbox_common.c:514)
==29513== by 0x53C965F: do_open (libvirt.c:1147)
==29513== by 0x53C9EBC: virConnectOpen (libvirt.c:1317)
==29513== by 0x142905: remoteDispatchConnectOpen (remote.c:1215)
==29513== by 0x126ADF: remoteDispatchConnectOpenHelper (remote_dispatch.h:2346)
==29513== by 0x5453D21: virNetServerProgramDispatchCall (virnetserverprogram.c:437)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1103245
An advice appeared there on the qemu-devel list [1]. When a domain is
suspended and then resumed guest kernel is not aware of this. So we've
introduced virDomainSetTime API that resets the time within guest
using qemu-ga. On the other hand, qemu itself is trying to make RTC
beat faster to catch the difference. But if we don't tell qemu that
guest's time was reset via the other method, both mechanisms are
applied resulting in again wrong guest time. In order to avoid summing
both corrections we need to tell qemu that it should not use the RTC
injection if the guest time is set via guest agent.
1: http://www.mail-archive.com/qemu-devel@nongnu.org/msg236435.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When a user would try changing the persistent IO tuning settings for a
disk that was hotplugged to a vm in a transient way, the
qemuDomainSetBlockIoTune API would use the same index for both the
live and config disk array. The disk was missing from the config array
though causing a crash of libvirtd.
To fix the issue, determine the indexes separately.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1131819
https://bugzilla.redhat.com/show_bug.cgi?id=1095636
When starting up the domain the domain's NICs are allocated. As of
1f24f682 (v1.0.6) we are able to use multiqueue feature on virtio
NICs. It breaks network processing into multiple queues which can be
processed in parallel by different host CPUs. The queues are, however,
created by opening /dev/net/tun several times. Unfortunately, only the
first FD in the row is labelled so when turning the multiqueue feature
on in the guest, qemu will get AVC denial. Make sure we label all the
FDs needed.
Moreover, the default label of /dev/net/tun doesn't allow
attaching a queue:
type=AVC msg=audit(1399622478.790:893): avc: denied { attach_queue }
for pid=7585 comm="qemu-kvm"
scontext=system_u:system_r:svirt_t:s0:c638,c877
tcontext=system_u:system_r:virtd_t:s0-s0:c0.c1023
tclass=tun_socket
And as suggested by SELinux maintainers, the tun FD should be labeled
as svirt_t. Therefore, we don't need to adjust any range (as done
previously by Guannan in ae368ebf) rather set the seclabel of the
domain directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Removing a shared device needs special steps for disks and hostdevs.
Instead of having one function dealing this split the code into two
separate functions that can be used with better granularity.
Adding a shared device needs special steps for disks and hostdevs.
Instead of having one function dealing this split the code into two
separate functions that can be used with better granularity.
The qemuCheckSharedDevice function is operating only on disk devices.
Rename it and change the arguments to reflect that and refactor some
logic for more readability.
Split it out into a separate function and simplify the code. There's no
need to copy the entry to update it as the hash returns pointer to the
existing item.
Also remove the now unused qemuSharedDeviceEntryCopy function.
To allow reuse split the code into a separate function and refactor it.
To update an existing entry there's no need to copy it first, just
update it inplace.
Pass the source of the changed media instead of a complete disk
definition.
Note that the @disk argument now contains what @olddisk would contain.
The new source is passed as a virStorageSource struct.
When we are changing media (or doing other hotplug operations) we need
to setup cgroups, locking and seclabels on the new disk. This is a
multi-step process where every piece can fail. To simplify dealing with
this introduce qemuDomainPrepareDisk that similarly to
qemuDomainPrepareDiskChainElement initializes/tears down a whole new
disk to be used with the domain.
Additionally the function supports passing a different source struct for
media changes of cdroms that will be refactored later.
Update bhyveBuildDiskArgStr to support volumes:
- Make virBhyveProcessBuildBhyveCmd and
virBhyveProcessBuildLoadCmd take virConnectPtr as the
first argument instead of bhyveConnPtr as virConnectPtr is
needed for virStorageTranslateDiskSourcePool,
- Add virStorageTranslateDiskSourcePool call to
virBhyveProcessBuildBhyveCmd and
virBhyveProcessBuildLoadCmd,
- Allow disks of type VIR_STORAGE_TYPE_VOLUME
Currently, qemu driver uses qemuTranslateDiskSourcePool()
to translate disk volume information. This function is
general enough and could be used for other drivers as well,
so move it to conf/domain_conf.c along with its helpers.
- qemuTranslateDiskSourcePool: move to storage/storage_driver.c
and rename to virStorageTranslateDiskSourcePool,
- qemuAddISCSIPoolSourceHost: move to storage/storage_driver.c
and rename to virStorageAddISCSIPoolSourceHost,
- qemuTranslateDiskSourcePoolAuth: move to storage/storage_driver.c
and rename to virStorageTranslateDiskSourcePoolAuth,
- Update users of qemuTranslateDiskSourcePool to use a
new name.
In commit 45ad1adb I added a nicer message for tunings that need
cgroups when unavailable (unprivileged), but I added this check for
I/O tuning of block devices, which doesn't need cgroups, because it is
done by QEMU, so let's fix that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
XM and XL config are very similar. Disks are specified differently
in XL, but the old XM disk config is still supported by XL. XL also
supports new config like spice that was never supported by XM.
This patch moves all the common parsing and formatting functions to
the new file xen_common.c and adapts the XM parser/formatter accordingly.
This restructuring paves way for introducing an XL parser/formatter in
the future.
While moving the code, fixup whitespace, comments, and style issues.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Wrap formatting code common to xm and xl in xenFormatConfigCommon
and export it.
Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Wrap parsing code common to xm and xl in xenParseConfigCommon
and export it.
Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
src/xenxs contains parsing/formating functions for the various xen
config formats, and is better named src/xenconfig.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Pin existing vcpus rather than existing vcpu pinning infos. This
increases the complexity of the lookup, but avoids pinning cpus that are
not enabled actually.
Remove the pinning info when removing to CPU, otherwise when the VM will
be started our code will try to pin non-existing vcpus as the definition
wasn't updated.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1129372
Tidy up control flow, change boolean argument to use 'bool', improve
error message in case the function is used to parse emulator pinning
info and avoid a few temp variables that made no sense.
Also when the function is called to parse emulator pinning info, there's
no need to check the processor ID in that case.
The check doesn't make much sense as right below it the entries are
either checked for duplicity or ignored in some cases. Having this check
doesn't actually forbid passing invalid values.
When editing guest's XML (on QEMU), it was possible to add multiple
listen elements into graphics parent element. However QEMU does not
support listening on multiple addresses. Configuration is tested for
multiple 'listen address' and if positive, an error is raised.
https://bugzilla.redhat.com/show_bug.cgi?id=1119212
Four functions are rewrite in this patch, that is:
vboxNodeGetInfo
vboxNodeGetCellsFreeMemory
vboxNodeGetFreeMemory
vboxNodeGetFreePages
Since these functions has nothing to do with vbox,
it can be directly moved to vbox_common.c. So, I
merged these things into one patch.
The vboxDomainSnapshotCreateXML integrated the snapshot redefine
with this patch:
http://www.redhat.com/archives/libvir-list/2014-May/msg00589.html
This patch introduced vboxSnapshotRedefine in vboxUniformedAPI to
enable the features.
This patch replace all version specified APIs to the uniformed api,
then, moving the whole implementation to vbox_common.c. As there
is only API level changes, the behavior of the function doesn't
change.
Some old version's defects has brought to the new one. The already
known things are:
*goto cleanup in a loop without releasing the pointers in the
loop.
*When function failed after machine unregister, no roll back
to recovery it and the virtual machine would disappear.
