Several daemons have similar code around general daemon startup code.
Let's move it into a file and share it among them.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a unit to start & stop a private dbus-daemon.
The daemon is meant to be started on demand, and associated with a
QEMU process. It should be stopped when the QEMU process is stopped.
The current policy is permissive like a session bus. Stricter
policies can be added later, following recommendations from:
https://git.qemu.org/?p=qemu.git;a=blob;f=docs/interop/dbus.rst
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This code was based on a per-helper instance and peer-to-peer
connections. The code that landed in qemu master for v5.0 is relying
on a single instance and DBus bus.
Instead of trying to adapt the existing dbus-vmstate code, let's
remove it and resubmit. That should make reviewing easier.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The functionality is now provided by glib's GKeyFile.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We want a way to easily run a private GMainContext in a
thread, with correct synchronization between startup
and shutdown of the thread.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virbpf module wraps syscalls to BPF. However, if the kernel
headers used at the compile time don't have support for BPF the
module offers stubs which return a negative one to signal error
to the caller. But there is a slight discrepancy between real
functions and these stubs. While the former set errno and return
-1 the latter report an error (without setting the errno) and
return -1. This is not optimal because the caller might see stale
errno and overwrite the error message with a less accurate one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Start virtiofsd for each <filesystem> device using it.
Pre-create the socket for communication with QEMU and pass it
to virtiofsd.
Note that virtiofsd needs to run as root.
https://bugzilla.redhat.com/show_bug.cgi?id=1694166
Introduced by QEMU commit a43efa34c7d7b628cbf1ec0fe60043e5c91043ea
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Just like virhostdev, this depends on domain_conf and
it's shared by multiple hypervisor drivers.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This module depends on domain_conf and is used directly by various
hypervisor drivers.
Move it to src/hypervisor.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After the introduction of virDomainDriverMergeBlkioDevice() in a
previous patch, it is now clear that lxcDomainSetBlkioParameters() and
qemuDomainSetBlkioParameters() uses the same loop to set cgroup
blkio parameter of a domain.
Avoid the repetition by adding a new helper called
virDomainCgroupSetupDomainBlkioParameters().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
lxcDomainMergeBlkioDevice() and qemuDomainMergeBlkioDevice()
are the same functions. This duplicated code can't be put in
the existing domain_cgroup.c since it's not cgroup related.
This patch introduces a new src/hypervisor/domain_driver.c to
host this more generic code that can be shared between virt
drivers. This new file is then used to create a new helper
called virDomainDeivceMergeBlkioDevice() to eliminate the code
repetition mentioned above. Callers in LXC and QEMU files
were updated.
This change is a preliminary step for more code reduction of
cgroup related code inside lxcDomainSetBlkioParameters() and
qemuDomainSetBlkioParameters().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It is no longer require since switching to the GLib based
event loop impl.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
* chown: use is conditionally compiled
* configmake: functionality imported to Makefile.am
* getaddrinfo: we have no portability problems
with Windows impl
* getpass: simplified impl is imported
* mgetgroups: getgrouplist is used directly
* net_if: header includes are conditionalized
* netdb: header includes are conditionalized
* passfd: simplified impl is imported
* posix-shell: functionality was unused & removed
* sigaction: usage is conditionalized
* sigpipe: usage is conditionalized
* stat-time: struct stat is used directly
* strchrnul: usage is eliminated
* strtok_r: usage is not a portability problem
* sys_stat: usage is conditionalized
* uname: rewritten to use native Win32 function to
get host arch
* waitpid: usage is conditionalized
* wcwidth: rewritten using g_unichar APIs
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The function virSecretGetSecretString calls into secret driver and is
used from other hypervisors drivers and as such makes more sense in
util.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The variable value is split on multiple lines, which have too
long indentation prefix leading to needless long lines.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When building RPMs for libvirt the PO files are part of libvirt-libs
package. Now that we generate libvirt.pot during build time the POT
creation date is also generated at that time.
The issue here is that when building libvirt-libs for x86_64 and i686
the generated libvirt.pot file will have different POT creation date
which affects installed PO files as well which leads to conflict when
installing both x86_64 and i686 packages.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The phyp driver was added in 2009 and does not appear to have had any
real feature change since 2011. There's virtually no evidence online
of users actually using it. IMO it's time to kill it.
This was discussed a bit in April 2016:
https://www.redhat.com/archives/libvir-list/2016-April/msg01060.html
Final discussion is here:
https://www.redhat.com/archives/libvir-list/2019-December/msg01162.html
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This module will be used by virHostdevManager and it's inspired
by virPCIDevice module. They are very similar except instead of
what makes a NVMe device: PCI address AND namespace ID. This
means that a NVMe device can appear in a domain multiple times,
each time with a different namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Introduce virsh commands for performing backup jobs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Accept XML describing a generic block job, and output it again as
needed. This may still need a few tweaks to match the documented XML
and RNG schema.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we use GRegex everywhere, there is no need for this module.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This function loads the BPF prog with prepared map into kernel and
attaches it into guest cgroup. It can be also used to replace existing
program in the cgroup if we need to resize BPF map to store more rules
for devices. The old program will be closed and removed from kernel.
There are two possible ways how to create BPF program:
- One way is to write simple C-like code which can by compiled into
BPF object file which can be loaded into kernel using elfutils.
- The second way is to define macros which look like assembler
instructions and can be used directly to create BPF program that
can be directly loaded into kernel.
Since the program is not too complex we can use the second option.
If there is no program, all devices are allowed, if there is some
program it is executed and based on the exit status the access is
denied for 0 and allowed for 1.
Our program will follow these rules:
- first it will try to look for the specific key using major and
minor to see if there is any rule for that specific device
- if there is no specific rule it will try to look for any rule that
matches only major of the device
- if there is no match with major it will try the same but with
minor of the device
- as the last attempt it will try to look for rule for all devices
and if there is no match it will return 0 to deny that access
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In order to implement devices controller with cgroup v2 we need to
add support for BPF programs, cgroup v2 doesn't have devices controller.
This introduces required helpers wrapping linux syscalls.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When we want to know the boot timestamp of the host, we can call
virHostGetBootTime(). Under the hood, it uses getutxid() which is
defined by POSIX and properly check for in configure. However,
musl took a path where it declares the function but instead of
providing any useful implementation it returns NULL meaning "no
record found". If that's the case, use our second best option -
/proc/uptime and a bit of maths.
https://bugzilla.redhat.com/show_bug.cgi?id=1760885
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
There was no need to handle files for translation from build directory
but that will change with following patches where we will stop
generating source files into source directory.
In order to have them included for translation we have to prefix each
file with SRCDIR or BUILDDIR.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Historically we did not support VPATH builds and everything was
generated into source directory. The introduction of VPATH builds
did not changed the way how our translation files are handled.
This patch changes the rules to generate everything into build
directory and stops distributing generated files in order to have
properly separated VPATH builds.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit <22d8e27ccd5faf48ee2bf288a1b9059aa7ffd28b> introduced our
syntax-check.mk file based on gnulib rules. However, the rule was
completely ignored as we don't have POTFILES.in file.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There is no need to have the libvirt-admin.so library definition in the
src directory. In addition the library uses directly code from admin
sub-directory so move the remaining bits there as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As part of an goal to eliminate Perl from libvirt build tools,
rewrite the minimize-po.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The getopt-posix module fixes a problem with optind being incorrectly
set after a failed option parse. It was also previously used to allow
the bhyve driver to access a private internal reentrant getopt impl.
None of this matters to libvirt code any more.
This partially reverts
commit b436a8ae5c
Author: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
Date: Thu Jun 9 00:50:35 2016 +0000
gnulib: add getopt module
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The xenapi driver has not seen any development since its initial
contribution 9 years ago. There have been no bug reports, no patches,
and no queries about the driver on the developer or user mailing lists.
Remove the driver from the libvirt sources.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
After the legacy xen driver was removed the libxl driver became
the only consumer of xenconfig. Move the few files in xenconfig
to the libxl driver and remove the directory.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a bunch of new virsh commands for managing checkpoints in
isolation. More commands are needed for performing incremental
backups, but these commands were easy to implement by modeling heavily
after virsh-snapshot.c. There is no need for checkpoint-revert or
checkpoint-current since those snapshot APIs have no checkpoint
counterpart. Similarly, it is not necessary to change which
checkpoint is current when redefining from XML, since until we
integrate checkpoints with snapshots, there is only a linear chain
(and you can deduce the current checkpoint by instead using
'checkpoint-list --leaves'). Other aspects of checkpoint-list are
also a bit simpler than the snapshot counterpart, in part because we
don't have to cater to back-compat to older API.
Upcoming patches will test these interfaces once the test driver
supports checkpoints.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a new file checkpoint_conf.c that performs the translation to and
from new XML describing a checkpoint. The code shares a common base
class with snapshots, since a checkpoint similarly represents the
domain state at a moment in time. Add some basic testing of round trip
XML handling through the new code.
Of note - this code intentionally differs from snapshots in that XML
schema validation is unconditional, rather than based on a public API
flag. We have many existing interfaces that still need to add a flag
for opt-in schema validation, but those interfaces have existing
clients that may not have been producing strictly-compliant XML, or we
may still uncover bugs where our RNG grammar is inconsistent with our
code (where omitting the opt-in flag allows existing apps to keep
working while waiting for an RNG patch). But since checkpoints are
brand-new, it's easier to ensure the code matches the schema by always
using the schema. If needed, a later patch could extend the API and
add a flag to turn on to request schema validation, rather than having
it forced (possibly just the validation of the <domain> sub-element
during REDEFINE) - but if a user encounters XML that looks like it
should be good but fails to validate with our RNG schema, they would
either have to upgrade to a new libvirt that adds the new flag, or
upgrade to a new libvirt that fixes the RNG schema, which implies
adding such a flag won't help much.
Also, the redefine flag requires the <domain> sub-element to be
present, rather than catering to historical back-compat to older
versions.
Signed-off-by: Eric Blake <eblake@redhat.com>
Introduce a bunch of new public APIs related to backup checkpoints.
Checkpoints are modeled heavily after virDomainSnapshotPtr (both
represent a point in time of the guest), although a snapshot exists
with the intent of rolling back to that state, while a checkpoint
exists to make it possible to create an incremental backup at a later
time. We may have a future hypervisor that can completely manage
checkpoints without libvirt metadata, but the first two planned
hypervisors (qemu and test) both always use libvirt for tracking
metadata relations between checkpoints, so for now, I've deferred
the counterpart of virDomainSnapshotHasMetadata for a separate
API addition at a later date if there is ever a need for it.
Note that until we allow snapshots and checkpoints to exist
simultaneously on the same domain (although the actual prevention of
this will be in a separate patch for the sake of an easier revert down
the road), that it is not possible to branch out to create more than
one checkpoint child to a given parent, although it may become
possible later when we revert to a snapshot that coincides with a
checkpoint. This also means that for now, the decision of which
checkpoint becomes the parent of a newly created one is the only
checkpoint with no child (so while there are APIs for dealing with a
current snapshot, we do not need those for checkpoints). We may end
up exposing a notion of a current checkpoint later, but it's easier to
add stuff when proven needed than to blindly support it now and wish
we hadn't exposed it.
The following map shows the API relations to snapshots, with new APIs
on the right:
Operate on a domain object to create/redefine a child:
virDomainSnapshotCreateXML virDomainCheckpointCreateXML
Operate on a child object for lifetime management:
virDomainSnapshotDelete virDomainCheckpointDelete
virDomainSnapshotFree virDomainCheckpointFree
virDomainSnapshotRef virDomainCheckpointRef
Operate on a child object to learn more about it:
virDomainSnapshotGetXMLDesc virDomainCheckpointGetXMLDesc
virDomainSnapshotGetConnect virDomainCheckpointGetConnect
virDomainSnapshotGetDomain virDomainCheckpointGetDomain
virDomainSnapshotGetName virDomainCheckpiontGetName
virDomainSnapshotGetParent virDomainCheckpiontGetParent
virDomainSnapshotHasMetadata (deferred for later)
virDomainSnapshotIsCurrent (no counterpart, see note above)
Operate on a domain object to list all children:
virDomainSnapshotNum (no counterparts, these are the old
virDomainSnapshotListNames racy interfaces)
virDomainSnapshotListAllSnapshots virDomainListAllCheckpoints
Operate on a child object to list descendents:
virDomainSnapshotNumChildren (no counterparts, these are the old
virDomainSnapshotListChildrenNames racy interfaces)
virDomainSnapshotListAllChildren virDomainCheckpointListAllChildren
Operate on a domain to locate a particular child:
virDomainSnapshotLookupByName virDomainCheckpointLookupByName
virDomainSnapshotCurrent (no counterpart, see note above)
virDomainHasCurrentSnapshot (no counterpart, old racy interface)
Operate on a snapshot to roll back to earlier state:
virDomainSnapshotRevert (no counterpart, instead checkpoints
are used in incremental backups via
XML to virDomainBackupBegin)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Libvirtd has long had integration with avahi for advertising libvirtd
using mDNS when TCP/TLS listening is enabled. For a long time the
virt-manager application had support for auto-detecting libvirtds
on the local network using mDNS, but this was removed last year
commit fc8f8d5d7e3ba80a0771df19cf20e84a05ed2422
Author: Cole Robinson <crobinso@redhat.com>
Date: Sat Oct 6 20:55:31 2018 -0400
connect: Drop avahi support
Libvirtd can advertise itself over avahi. The feature is disabled by
default though and in practice I hear of no one actually using it
and frankly I don't think it's all that useful
The 'Open Connection' wizard has a disproportionate amount of code
devoted to this feature, but I don't think it's useful or worth
maintaining, so let's drop it
I've never heard of any other applications having support for using
mDNS to detect libvirtd instances. Though it is theoretically possible
something exists out there, it is clearly going to be a niche use case
in the virt ecosystem as a whole.
By removing avahi integration we can cut down the dependency chain for
the basic libvirtd install and reduce our code maint burden.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The only user is now in qemu_monitor_json.c to re-parse the command line
format into keyvalue pairs for use in QMP command construction.
Move and rename the functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
