This way it can be used later in virResctrlAllocGetUnused().
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The value 100 represented the percentage as it was originally done from
Intel in the Linux kernel and on their CPUs. Since then the situation
changed and there is no error-prone way of figuring out the meaning of
the value in the current configuration, let alone its possible maximum.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The meaning of the values as well as their maximums are hard to predict
and accounting for all the possibilities (which by the way might change
during daemon's execution) is borderline hallucinatory. There is
already a way we represent them, which is the same as the Linux kernel.
We do not interpret them at all, just blindly use them. In order to
make this more apparent for the users change the documentation for the
<memorytune/> (not <memtune/>) element more boldly.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In some scenarios the memory bandwidth in the schemata file might be 0
and so can the minimum allocation in other ones. Remove checks which
were added for extra cautiousness.
Resolves: https://issues.redhat.com/browse/RHEL-54235
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Enhance the 'since' annotation of <filterref> documentation to note
it's only supported by the QEMU, LXC, and ch hypervisor drivers.
Suggested-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The description of virConnectGetVersion() says the function might only
work with a privileged access to the hypervisor, not with a read-only
connection. However that is not true since commit a2e2e4652f and can
be safely removed.
Signed-off-by: Stepan Zobal <szobal@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
xmlBuffer->content was deprecated in libxml2 v2.13.0-33-gb34dc1e4
xmlBufferDetach(xmlBuffer) should be used instead
Signed-off-by: Jakub Palacky <jpalacky@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
xmlParserCtxt->lastError was deprecated in libxml2 v2.13.0-103-g1228b4e0
xmlCtxtGetLastError(xmlParserCtxt) should be used instead
Signed-off-by: Jakub Palacky <jpalacky@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When libbsd is available, use the preferred readpassphrase() function isntead of getpass()
as the getpass() function has been marked as obsolete and shouldnt be used
Signed-off-by: Jakub Palacky <jpalacky@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When connecting to a VMware server (eg using vpx://) we download and
try to parse the VMware metadata '*.vmx' file of a guest. In this
case a VMX file was found which contained this key:
pciPassthru*.present = "False"
The '*' character was not previously allowed in keys so this failed to
parse with the error:
VIR_ERR_CONF_SYNTAX: VIR_FROM_CONF: configuration file syntax error:
memory conf:74: expecting an assignment
Resolves: https://issues.redhat.com/browse/RHEL-58446
Thanks: Daniel Berrange
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This commit modifies the AppArmor profile for virt-aa-helper to
accommodate an observed behavior in certain Linux distributions,
such as ArchLinux.
In these distributions, /usr/sbin symlinks to /usr/bin. To ensure
that virt-aa-helper can execute apparmor_parser when it resides
in /usr/bin, the profile has been updated accordingly.
Signed-off-by: Tom <libvirt-patch@douile.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Add a test case that the numeric overflow when parsing disk target is
detected.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The conversion to index entails multiplication and accumulation by user
provided data which can easily overflow, use VIR_MULTIPLY_ADD_IS_OVERFLOW
to check if the string is valid.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/674
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The previous fix didn't check the overflow in addition. Use the new
macro to check both multiplication and addition overflows.
Fixes: 8666523b7d
Closes: https://gitlab.com/libvirt/libvirt/-/issues/671
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The macro does the two checks together so that it's obvious what we're
checking as doing it in place is really unpleasant.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Few of the handlers didn't take that possibility into account. Warn
others.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Similarly to other cases users may specify the feature flag multiple
times.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In case when the user specifies the '<hyperv/>' feature multiple times
we could overwrite already parsed data. Clear it beforehand.
As before this isn't trying to address the case of features being
specified multiple times not making much sense.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/675
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
'virBitmapShrink' clears the bits beyond the end of the bitmap when
shrinking and then reallocates to match the new size. As it uses the
address of the first bit beyond the bitmap to do the clearing it can
overrun the allocated buffer if we're not actually going to shrink it
and the last bit's address is on the chunk boundary.
Fix it by returning in that corner case and add few more tests to be
sure.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/673
Fixes: d6e582da80
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
One of the failure paths skips code which would assign the string from
the temporary variable to the parsed struct, thus leaking it on failure.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/672
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In one of recent commits new CPU model was introduced. But
corresponding change in meson.build is missing which results in
the XML file not being installed.
Fixes: 3afbb1644c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Recent fix to use the proper 'async' monitor function would cause
libvirt to leak some of the objects it's supposed to clean up in other
places besides qemu.
Don't skip the whole function on failure to enter the job but just the
monitor section.
Fixes: 9b22c25548
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The number is parsed manually without making sure it'll fit.
Fixes: 3bbac7cdb6
Closes: https://gitlab.com/libvirt/libvirt/-/issues/671
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Don't allocate the struct if it exists already. This sidesteps the
discussion about whether forbidding multiple feature definitions makes
sense.
Fixes: a8e0f9c682
Closes: https://gitlab.com/libvirt/libvirt/-/issues/670
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This was added in qemu commit 6e82d3b6220777667968a04c87e1667f164ebe88.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduced in qemu commit 138c3377a9b27accec516b2c0da90dedef98a780.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'qemuBackupDiskDataCleanupOne()' is entering the monitor while we're in
the async backup job inside 'qemuBackupBegin()' which is semantically
wrong and per upstream report causes crashes if some monitoring commands
are run in parallel.
Use qemuDomainObjEnterMonitorAsync() instead.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/668
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add a bunch of tests verifying that script-friendly options of certain
commands are not changed incompatibly thus potentially breaking user
scripts.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Commit 271940223c which strived to add
support to use '--uuid' in the table output of 'virsh list' went too far
and also allowed the default table view to be enabled when just '--uuid'
is specified.
This broke the script-friendly output which previously had this format:
$ virsh list --uuid
b6d03c07-86f8-4a57-8719-172a5d0359bb
to this script-unfriendly output:
$ virsh list --uuid
Id Name State UUID
-------------------------------------------------------------
1 ha running b6d03c07-86f8-4a57-8719-172a5d0359bb
Using the human friendly output will still be possible by using:
$ virsh list --table --uuid
Fixes: 271940223c
Closes: https://gitlab.com/libvirt/libvirt/-/issues/666
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add a capability dump for 'riscv64' with 'qemu-9.1' release captured
on a x86_64 host as I don't have hardware.
The last dump for riscv64 was done with qemu-8.0 which didn't manifest
the newest features such as CPU type selection and ACPI support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU-9.1 was released so update the capabilities to the final state.
Notable changes:
- Machine types 'pc-q35-6.1' and 'pc-i440fx-6.1' were deprecated
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function can return directly rather than setting 'ret' as there's no
cleanup.
It also doesn't make sense to conditionally compile out the 'break'
statement when checking whether a disk has rawio enabled if
'CAP_SYS_RAWIO' is _not_ defined as the function will still behave the
same.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The 'nfs-utils' package provides 'showmount' used to detect NFS-based
storage pool sources. As the lookup of storage pool sources can fail
gracefully and does so e.g. if the gluster backend is not installed we
can do the same for NFS.
Apart from allowing a tighter footprint when installing libvirt, this
also allows installation of the storage driver core in cases when a
security policy prohibits use of NFS.
Resolves: https://issues.redhat.com/browse/RHEL-56611
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
With the new virCommand infrastructure which can find the program in
path automatically we no longer need the build-time detection.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
/usr/bin/dtrace has been split from `systemtap-sdt-devel` into
`systemtap-sdt-dtrace`
It's forward and backward compatible to require the dtrace binary
directly.
We still need the latter dep though, for sdt.h in generated
libvirt_probes.h
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
When users pre-create a tap device to use with multiqueue interface that
has `managed="no"`, change the error so that it does not indicate we are
trying to create the device, and on top of that hint at the most
probable error cause.
Resolves: https://issues.redhat.com/browse/RHEL-55749
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function generates *ifname from the get go and most functions do not
wrap the string in a NULLSTR as it is not necessary. The few leftovers
are outliers that are changed to fit the theme better.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
pvpanic-pci is the only reasonable implementation of a panic
device for aarch64/virt guests. Right now we're asking users to
provide the model name manually, but we can be more helpful and
fill it in automatically instead.
With this change, the aarch64-panic-no-model test no longer
fails and so it's no longer useful to us. Instead, we can amend
the aarch64-virt-default-models test case to include panic
coverage, something that until now wasn't possible.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Right now the fallback behavior is to use MODEL_ISA if we
haven't been able to find a better match, but that's not very
useful as we're still going to hit an error later, when
QEMU_CAPS_DEVICE_PANIC is not found at Validate time.
Instead of doing that, allow MODEL_DEFAULT to get all the
way to Validate and report an error upon encountering it.
The reported error changes slightly, but other than that the
set of configurations that are allowed and blocked remains
the same.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Perform decisions based on the architecture and machine type
in a single place instead of duplicating them.
This technically adds new behavior for MODEL_ISA in
qemuDomainDefAddDefaultDevices(), but it doesn't make any
difference functionally since we don't set addPanicDevice
outside of ppc64(le) and s390(x). If we did, the lack of
handling for that value would be a latent bug.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It merely duplicates the existing aarch64 coverage right now,
but it will become actually useful with the upcoming changes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
