The source code will check for NULL arguments for 'macvtap_macaddr' and
'vmuuid', so no need for the NONNULL in the prototypes. Following the stack
for both arguments to virNetDevVPortProfileOpSetLink also shows called
functions would handle a NULL value.
Additionally, modified the prototype to use the same 'macvtap_macaddr'
name as the source code for consistency.
Since the code checks 'mgr == NULL' anyway, no need for the prototype
to have the NONNULL arg check. Also add an error message to indicate what
the failure is so that there isn't a failed for some reason error.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The comparison code used STREQ_NULLABLE anyway for both 'drv_name' and
'dom_name', so no need. Add a NULLSTR on the 'dom_name' too.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The comparison code used STREQ_NULLABLE anyway for both 'drv_name' and
'dom_name', so no need. Add a NULLSTR on the 'dom_name' too.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The code checks and handles a NULL 'str', so just remove the NONNULL.
Update the error message to add the NULLSTR() around 'str' also.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This patch splits out the part of virNetDevTapCreateInBridgePort()
that would need to be re-done if an existing tap device had to be
re-attached to a bridge, and puts it into a separate function. This
can be used both when an existing domain interface config is updated
to change its connection, and also to re-attach to the "same" bridge
when a network has been stopped and restarted. So far it is used for
nothing.
This function provides the bridge/bond device that the given network
device is attached to. The return value is 0 or -1, and the master
device is a char** argument to the function - this is needed in order
to allow for a "success" return from a device that has no master.
The only reason that the ethtool features weren't being retrieved in
an unprivileged libvirtd was because they required ioctl(), and the
ioctl was using an AF_PACKET socket, which requires root. Now that we
are using AF_UNIX for ioctl(), this restriction can be removed.
The exact family of the socket created for the fd used by ioctl(7)
doesn't matter, it just needs to be a socket and not a file. But for
some reason when macvtap support was added, it used
AF_PACKET/SOCK_DGRAM sockets for its ioctls; we later used the same
AF_PACKET/SOCK_DGRAM socket for new ioctls we added, and eventually
modified the other pre-existing ioctl sockets (for creating/deleting
bridges) to also use AF_PACKET/SOCK_DGRAM (that code originally used
AF_UNIX/SOCK_STREAM).
The problem with using AF_PACKET (intended for sending/receiving "raw"
packets, i.e. packets that can be some protocol other than TCP or UDP)
is that it requires root privileges. This meant that none of the
ioctls in virnetdev.c or virnetdevip.c would work when running
libvirtd unprivileged.
This packet solves that problem by changing the family to AF_UNIX when
creating the socket used for any ioctl().
When enabling IPv6 on all interfaces, we may get the host Router
Advertisement routes discarded. To avoid this, the user needs to set
accept_ra to 2 for the interfaces with such routes.
See https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt
on this topic.
To avoid user mistakenly losing routes on their hosts, check
accept_ra values before enabling IPv6 forwarding. If a RA route is
detected, but neither the corresponding device nor global accept_ra
is set to 2, the network will fail to start.
virNetlinkCommand() processes only one response message, while some
netlink commands, like route dumping, need to process several.
Add virNetlinkDumpCommand() as a virNetlinkCommand() sister.
Allow to reuse as much as possible from virNetlinkCommand(). This
comment prepares for the introduction of virNetlinkDumpCommand()
only differing by how it handles the responses.
While connecting to qemu monitor, the first thing we do is wait
for it to show up. However, we are doing it with some timeout to
avoid indefinite waits (e.g. when qemu doesn't create the monitor
socket at all). After beaa447a29 we are using exponential back
off timeout meaning, after the first connection attempt we wait
1ms, then 2ms, then 4 and so on. This allows us to bring down
wait time for small domains where qemu initializes quickly.
However, on the other end of this scale are some domains with
huge amounts of guest memory. Now imagine that we've gotten up to
wait time of 15 seconds. The next one is going to be 30 seconds,
and the one after that whole minute. Well, okay - with current
code we are not going to wait longer than 30 seconds in total,
but this is going to change in the next commit.
The exponential back off is usable only for first few iterations.
Then it needs to be caped (one second was chosen as the limit)
and switch to constant wait time.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The function is actually in virutil.c, but prototyped in virfile.h.
This patch fixes that by renaming the function to virWaitForDevices,
adding the prototype in virutil.h and libvirt_private.syms, and then
changing the callers to use the new name.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Found by Coverity. Because there's an "if ((cur = strstr(base, "revision"))
!= NULL) {" followed by a "base = cur" coverity notes that 'base' could
then be NULL causing the return to the top of the "while ((tmp_base =
strstr(base, "processor")) != NULL) {" to have strstr deref a NULL 'base'
pointer because the setting of base at the bottom of the loop is unconditional.
Alter the code to set "base = cur" after processing each key. That will
"ensure" that base doesn't get set to NULL if both "cpu" and "revision"
do no follow a "processor".
While a /proc/cpuinfo file that has a "processor" key but with neither
a "cpu" nor a "revision" doesn't seem feasible, the code is written as if
it could happen, so we have to account for it.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Calls to virFileReadAll after a VIR_ALLOC that return NULL all show
a memory leak since 'ret' isn't virSysinfoDefFree'd and normal path
"return ret" doesn't free outbuf.
Reported by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Whole implementations along with helper totalling screens of code were
conditionally compiled. That made the code totally unreadable and
untestable. Rename functions to have the architecture in the name so
that all can be compiled at the same time and introduce header to allow
testing them all.
Proposed formal coding conventions encourage defining typedefs for
vir[Blah] and vir[Blah]Ptr separately from the associated struct named
_vir[Blah]:
typedef struct _virBlah virBlah;
typedef virBlah *virBlahPtr;
struct _virBlah {
...
};
At some point in the past, I had submitted several patches using a
more compact style that I prefer, and they were accepted:
typedef struct _virBlah {
...
} virBlah, *virBlahPtr;
Since these are by far a minority among all struct definitions, this
patch changes all those definitions to reflect the style prefered by
the proposal so that there is 100% consistency.
After the system has been booted, it should not change.
Cache the return value of virSystemdHasMachined.
Allow starting and terminating machines with just one
DBus call, instead of three, reducing the chance of
the call timing out.
Also introduce a small function for resetting the cache
to be used in tests.
Both virSystemdTerminateMachine and virSystemdCreateMachine
propagate the error to tell between a non-systemd system
and a hard error.
In virSystemdGetMachineNameByPID both are treated the same,
but an error is ignored by the callers.
Split out the checks into a separate function.
Arguably though, function returning only on success is a very
interesting, although quite impractical concept. Also, the errno isn't
and shouldn't be preserved in this case, since the errno can be directly
fed to the virReportSystemError.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This will eventually replace virQEMUBuildBufferEscapeComma, however
it's not possible right now. Some parts of the code that uses the
old function needs to be refactored.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
GCC 7 gets upset by
if (!tmp && (size * count))
warning
util/viralloc.c: In function 'virReallocN':
util/viralloc.c:246:23: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context]
if (!tmp && (size * count)) {
~~~~~~^~~~~~~~
Keep it happy by adding != 0 to the right hand expression
so it realizes we really are wanting to treat the result
of the arithmetic expression as a boolean
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'raw' block driver in Qemu is not directly interesting from
libvirt's perspective, but it can be layered above some other block
drivers and this may be interesting for the user.
The patch adds support for the 'raw' block driver. The driver is treated
simply as a pass-through and child driver in JSON is queried to get the
necessary information.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Split virStorageSourceParseBackingJSON into two functions so that the
core can be reused by other functions. The new function called
virStorageSourceParseBackingJSONInternal accepts virJSONValuePtr.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
The utils code should stay separated from other code (except for very
well justified cases). Unfortunately commit 272769becc
made it trivial to break the separation (and not get slapped by the
syntax-check rule) by adding -I src/conf to the CFLAGS for utils.
Remove this shortcut and except the two offenders from the syntax check
so that the codebase can be kept separated.
Create a virscsihost.c and place the functions there. That removes the
last #ifdef __linux__ from virutil.c.
Take the opporunity to also change the function names and in one case
the parameters slightly
Rather than have them mixed in with the virutil apis, create a separate
virvhba.c module and move the vHBA related calls into there. Soon there
will be more added.
Also modify the names of the functions and some arguments to be more
indicative of what is really happening. Adjust the callers respectively.
While I was changing fchosttest, rather than the non-descriptive names
test1...test6, rename them to match what the test is doing.
Before 9c17d665fd (v1.3.2 - I know, right?) it was possible to
have the following interface configuration:
<interface type='ethernet'/>
<script path=''/>
</interface>
This resulted in -netdev tap,script=,.. Fortunately, qemu helped
us to get away with this as it just ignored the empty script
path. However, after the commit mentioned above it's libvirtd
who is executing the script. Unfortunately without special
case-ing empty script path.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently disk names do not follow the
(regex) /^[fhv]d[a-z]+[0-9]*$/ completely
and hence one can assign disk names like
vd2 etc. This patch ensures that the
disk names follow the regex mentioned.
This patch also adds a testcase.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
To make sure bit 'b' fits into the bitmap, we need to allocate b+1
bits, since we number from 0.
Adjust the bitmap test to set a bit at a multiple of 16.
That way the test fails without this fix, because the VIR_REALLOC
call clears the newly added memory even if the original pointer
has not changed.
So rather than comparing 2 paths (strings) as they are, which can very
easily lead to unnecessary errors (e.g. in storage driver) that the paths
are not the same when in fact they'd be e.g. just symlinks to the same
location, we should put our best effort into resolving any symlinks and
canonicalizing the path and only then compare the 2 paths for equality.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Although currently this is documented in virsh man page
and virsh help, the expicit mention in the error message
is helful for tools using the API directly.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
After freeing the data structures we have to reset the counters to
zero. This fixes a segmentation fault when virNetDevIPInfoClear is
called twice (e.g. this is possible in virDomainNetDefParseXML() if
virDomainNetIPInfoParseXML(...) fails with ret < 0 (this leads to the
first call of 'virNetDevIPInfoClear(&def->guestIP)') and the resulting
call of virDomainNetDefFree(def) in the error path of
virDomainNetDefParseXML() (this leads to the second call of
virNetDevIPInfoClear(&def->guestIP), and finally to the segmentation
fault).
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
This patchs allows to set the timeout value used for all
openvswitch calls. The default timeout value remains as
before at 5 seconds.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Provide the ability to specify a default timeout value for
successful completion of openvswitch calls in the libvirtd
configuration file.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virNetDevTapCreateInBridgePort() has always set the new tap device to
the current MTU of the bridge it's being attached to. There is one
case where we will want to set the new tap device to a different
(usually larger) MTU - if that's done with the very first device added
to the bridge, the bridge's MTU will be set to the device's MTU. This
patch allows for that possibility by adding "int mtu" to the arg list
for virNetDevTapCreateInBridgePort(), but all callers are sending -1,
so it doesn't yet have any effect.
Since the requested MTU isn't necessarily what is used in the end (for
example, if there is no MTU requested, the tap device will be set to
the current MTU of the bridge), and the hypervisor may want to know
the actual MTU used, we also return the actual MTU to the caller (if
actualMTU is non-NULL).
We will need to traverse the symlinks one step at the time.
Therefore we need to see where a symlink is pointing to.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The comment to the function states that the errors from the child
process are reported. Well, the error buffer is filled with
possible error messages. But then it is thrown away. Among with
important error message from the child process.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Originally/discovered proposed by "Wang King <king.wang@huawei.com>"
When the virCloseCallbacksSet is first called, it increments the refcnt
on the domain object to ensure it doesn't get deleted before the callback
is called. The refcnt would be decremented in virCloseCallbacksUnset once
the entry is removed from the closeCallbacks has table.
When (mostly) normal shutdown occurs, the qemuProcessStop will end up
calling qemuProcessAutoDestroyRemove and will remove the callback from
the list and hash table normally and decrement the refcnt.
However, when qemuConnectClose calls virCloseCallbacksRun, it will scan
the (locked) closeCallbacks list for matching domain and callback function.
If an entry is found, it will be removed from the closeCallbacks list and
placed into a lookaside list to be processed when the closeCallbacks lock
is dropped. The callback function (e.g. qemuProcessAutoDestroy) is called
and will run qemuProcessStop. That code will fail to find the callback
in the list when qemuProcessAutoDestroyRemove is called and thus not decrement
the domain refcnt. Instead since the entry isn't found the code will just
return (mostly) harmlessly.
This patch will resolve the issue by taking another ref during the
search UUID process during virCloseCallackRun, decrementing the refcnt
taken by virCloseCallbacksSet, calling the callback routine and returning
overwriting the vm (since it could return NULL). Finally, it will call the
virDomainObjEndAPI to lower the refcnt and remove the lock taken during
the search UUID processing. This may cause the vm to be destroyed.
Currently, on every --enable perf_event command,
a new event->fd is created and counting of perf
event counter starts from zero and previous
event->fd is lost. This patch prevents this
behaviour.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
It is destructive to attempt reset on a pci- or cardbus-bridge, the
host can crash. The bridges won't contain any guest data and neither
they can be passed through using vfio/stub. So, no point in allowing a
reset on them.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Non-endpoint devices like pci-bridges cannot be assigned to guests.
Prevent such attempts.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Avoid return with the closeCallbacks locked when get callbacks list for connect fail.
Signed-off-by: Wang King <king.wang@huawei.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Based on work of Mehdi Abaakouk <sileht@sileht.net>.
When parsing vhost-user interface XML and no ifname is found we
can try to fill it in in post parse callback. The way this works
is we try to make up interface name from given socket path and
then ask openvswitch whether it knows the interface.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
File open errors are prevented by a file exists check before
virFileReadAll is called since all callers of the virReadFCHost
method handle errors themselves based on the NULL return anyway.
Also included is a minor spelling correction in a comment.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
This is a simple wrapper over mount(). However, not every system
out there is capable of moving a mount point. Therefore, instead
of having to deal with this fact in all the places of our code we
can have a simple wrapper and deal with this fact at just one
place.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Other drivers (like qemu) would like to know if the namespaces
are available therefore it makes sense to move this function to
a shared module.
At the same time, this function had some default namespaces that
are checked with every call. It is not necessary - let callers
pass just those namespaces they are interested in.
With the move the function is renamed to
virProcessNamespaceAvailable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The code at the very bottom of the DAC secdriver that calls
chown() should be fine with read-only data. If something needs to
be prepared it should have been done beforehand.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds support and documentation for
a generalized hardware cache event called cache_l1d
perf event.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
Currently when spawning containers with systemd, the container PID 1
will get moved into the systemd machine slice. Libvirt then manually
moves the libvirt_lxc and qemu-nbd processes into the cgroups associated
with the slice, but skips the systemd controller cgroup. This means that
from systemd's POV, libvirt_lxc and qemu-nbd are still part of the
libvirtd.service unit.
On systemctl daemon-reload, it will notice that libvirt_lxc & qemu-nbd
are in the libvirtd.service unit for the systemd controller, but in the
machine cgroups for resources. Systemd will thus move them back into
the libvirtd.service resource cgroups next time libvirtd is restarted.
This causes libvirtd to kill off the container due to incorrect cgroup
placement.
The solution is to ensure that when moving libvirt_lxc & qemu-nbd, we
also move the systemd cgroup controller placement. Normally this is
not something we ever want todo, but this is a special case as we are
intentionally wanting to move them to a different systemd unit.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently, there's only linux implementation for
virGetFCHostNameByFabricWWN(). Since the symbol is exported in
our private symbols we ought to have implementation for other
platforms too. This also triggers compilation error on FreeBSD:
../src/.libs/libvirt_driver_storage_impl.a(libvirt_driver_storage_impl_la-storage_backend_scsi.o): In function `createVport':
/usr/home/jenkins/libvirt-master/systems/libvirt-freebsd/build/src/../../src/storage/storage_backend_scsi.c:740: undefined reference to `virGetFCHostNameByFabricWWN'
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The resulting function virFileGetMountSubtreeImpl() just uses
virStringSortRevCompare or virStringSortCompare which uses strcmp().
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Rather than extraneous VIR_FREE's depending on where we are in the code,
move them to the top of the loop and in the cleanup path.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Clang 3.9 refuses to compile the existing code with the
following error:
util/virfirewall.c:425:20: error: passing an object that undergoes
default argument promotion to 'va_start'
has undefined behavior [-Werror,-Wvarargs]
va_start(args, layer);
^
util/virfirewall.c:420:37: note: parameter of type 'virFirewallLayer'
is declared here
virFirewallLayer layer,
^
This happens because 'layer' is of type virFirewallLayer, which
is an enum type and not a standard type such as eg. void* or int.
To solve the issue, turn virFirewallAddRule() from a very thin
wrapper around virFirewallAddRuleFullV() to a macro that expands
to a call to virFirewallAddRuleFull() - itself a very thin wrapper
around the aforementioned virFirewallAddRuleFullV() - with no loss
of functionality or type safety.
Due to nature of operations we do over the string list (more
precisely due to how virStringListRemove() works), it is not the
best idea to use dataFree callback. Problem is, on MAC address
remove, the string list remove function modifies the original
list in place. Then, virHashUpdateEntry() is called which frees
all the data stored in the list rendering @newMacsList point to
freed data.
==16002== Invalid read of size 8
==16002== at 0x50BC083: virFree (viralloc.c:582)
==16002== by 0x513DC39: virStringListFree (virstring.c:251)
==16002== by 0x51089B4: virMacMapHashFree (virmacmap.c:67)
==16002== by 0x50EF30B: virHashAddOrUpdateEntry (virhash.c:352)
==16002== by 0x50EF4FD: virHashUpdateEntry (virhash.c:415)
==16002== by 0x5108BED: virMacMapRemoveLocked (virmacmap.c:129)
==16002== by 0x51092D5: virMacMapRemove (virmacmap.c:346)
==16002== by 0x402F02: testMACRemove (virmacmaptest.c:107)
==16002== by 0x403F15: virTestRun (testutils.c:180)
==16002== by 0x4032C4: mymain (virmacmaptest.c:205)
==16002== by 0x405A3B: virTestMain (testutils.c:992)
==16002== by 0x403D87: main (virmacmaptest.c:237)
==16002== Address 0xdd5a4d0 is 0 bytes inside a block of size 24 free'd
==16002== at 0x4C2AD6F: realloc (vg_replace_malloc.c:693)
==16002== by 0x50BB99B: virReallocN (viralloc.c:245)
==16002== by 0x513DC0B: virStringListRemove (virstring.c:235)
==16002== by 0x5108BA6: virMacMapRemoveLocked (virmacmap.c:124)
==16002== by 0x51092D5: virMacMapRemove (virmacmap.c:346)
==16002== by 0x402F02: testMACRemove (virmacmaptest.c:107)
==16002== by 0x403F15: virTestRun (testutils.c:180)
==16002== by 0x4032C4: mymain (virmacmaptest.c:205)
==16002== by 0x405A3B: virTestMain (testutils.c:992)
==16002== by 0x403D87: main (virmacmaptest.c:237)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In virMacMapRemoveLocked() we have two variables: @macsList and
@newMacsList. Obviously, @newMacsList is supposed to hold pointer
to modified list but in fact it holds pointer to the old list.
It's confusing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch reduces the complexity of the filtering algorithm in
virCgroupDetect by first correcting the controller mask and then
checking for potential co-mounts without any correlating
controller mask modifications.
If you agree that this patch removes complexity and improves
readability it could simply be squashed into the first patch
of this series.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
The cgroup controller filtering in virCgroupDetect does not work
properly if the following conditions are met:
1) the host system does not have a cgroup controller which
libvirt requests (unavailable controller) and
2) libvirt is configured to disable a controller (disabled controller) and
3) the disabled controller is located before the unavailable controller
in virCgroupController.
As an example: The memory controller is unavailable and the cpuset
controller is configured to be disabled.
In this scenario trying to start a domain results in the error
error: Controller 'cpuset' is not wanted, but 'memory' is co-mounted: Invalid argument
This error occurs when virCgroupDetect is called with a valid parent group.
The resulting group created by virCgroupCopyMounts holds for cpuset and
memory controller empty mount points. The filtering of disabled controllers
checks for co-mounts by comparing the mount points. The cpuset controller
causes the filtering to occur before the memory controller is marked as to be
ignored by modifying the controller mask since it is unavailable.
Therefore the co-mount detection logic compares the cpuset and memory controller
mount points and since both are empty the memory controller is regarded
erroneously as being co-mounted.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The API creates PTR domain which corresponds to a given addr/prefix.
Both IPv4 and IPv6 addresses are supported, but the prefix must be
divisible by 8 for IPv4 and divisible by 4 for IPv6.
The generated PTR domain has the following format
IPv4: 1.2.3.4.in-addr.arpa
IPv6: 0.1.2.3.4.5.6.7.8.9.a.b.c.d.e.f.0.1.2.3.4.5.6.7.8.9.a.b.c.d.e.f.ip6.arpa
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The PERF_COUNT_HW_REF_CPU_CYCLES constant is not available
on all Linux distros libvirt targets, so its use must be
made conditional. Other constant have existed long enough
that we can assume they exist, as we don't support very
old distros like RHEL-5 any more.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Along with an empty string, it should also be possible for users to pass
NULL to the public APIs which in turn would trigger a routine(future
work) responsible for defining an appropriate default logging output
given the current circumstances.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
These helpers will manage the log destination defaults (fetch/set). The reason
for this is to stay consistent with the current daemon's behaviour with respect
to /etc/libvirt/<daemon>.conf file, since both assignment of an empty string
or not setting the log output variable at all trigger the daemon's decision on
the default log destination which depends on whether the daemon runs daemonized
or not.
This patch also changes the logic of the selection of the default
logging output compared to how it is done now. The main difference though is
that we should only really care if we're running daemonized or not, disregarding
the fact of (not) having a TTY completely (introduced by commit eba36a3878) as
that should be of the libvirtd's parent concern (what FD it will pass to it).
Before:
if (godaemon || !hasTTY):
if (journald):
use journald
if (godaemon):
if (privileged):
use SYSCONFIG/libvirtd.log
else:
use XDG_CONFIG_HOME/libvirtd.log
else:
use stderr
After:
if (godaemon):
if (journald):
use journald
else:
if (privileged):
use SYSCONFIG/libvirtd.log
else:
use XDG_CONFIG_HOME/libvirtd.log
else:
use stderr
Signed-off-by: Erik Skultety <eskultet@redhat.com>
We will need this function in near future so that we know what
/dev device corresponds to the SCSI device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We will need this function in near future so that we know what
/dev device corresponds to the SCSI device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We will need this function in near future so that we know what
/dev device corresponds to the USB device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Namely, virFileGetACLs, virFileSetACLs, virFileFreeACLs and
virFileCopyACLs. These functions are going to be required when we
are creating /dev for qemu. We have copy anything that's in
host's /dev exactly as is. Including ACLs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Almost none of our virJSONValue*Get* functions accept const virJSONValue
pointers and it wouldn't even make sense since we sometimes modify what
we get. And because there is no reason for preventing callers of
virJSONValueObjectForeachKeyValue from modifying the values they get in
each iteration we can just stop doing it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The functions to retrieve online and present host CPU information
are only supported on Linux for the time being.
This leads to runtime errors if these function are used on other
platforms. To avoid that, code in higher levels using the functions
must replicate the conditional compilation in higher level which
is error prone (and is plainly spoken ugly).
Adding a function virHostCPUHasBitmap that can be used to check
for host CPU bitmap support.
NB: There are other functions including the host CPU count that
are lacking support on all platforms, but they are too essential
in order to be bypassed.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Instead of having duplicated code in qemuStorageLimitsRefresh and
virStorageBackendUpdateVolTargetInfo to get capacity specific data
about the storage backing source or volume -- create a common API
to handle the details for both.
As a side effect, virStorageFileProbeFormatFromBuf returns to being
a local/static helper to virstoragefile.c
For the QEMU code - if the probe is done, then the format is saved so
as to avoid future such probes.
For the storage backend code, there is no need to deal with the probe
since we cannot call the new API if target->format == NONE.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Instead of having duplicated code in qemuStorageLimitsRefresh and
virStorageBackendUpdateVolTargetInfoFD to fill in the storage backing
source or volume allocation, capacity, and physical values - create a
common API that will handle the details for both.
The common API will fill in "default" capacity values as well - although
those more than likely will be overridden by subsequent code. Having just
one place to make the determination of what the values should be will
make things be more consistent.
For the QEMU code - the data filled in will be for inactive domains
for the GetBlockInfo and DomainGetStatsOneBlock API's. For the storage
backend code - the data will be filled in during the volume updates.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit id '8dc27259' introduced virStorageSourceUpdateBlockPhysicalSize
in order to retrieve the physical size for a block backed source device
for an active domain since commit id '15fa84ac' changed to use the
qemuMonitorGetAllBlockStatsInfo and qemuMonitorBlockStatsUpdateCapacity
API's to (essentially) retrieve the "actual-size" from a 'query-block'
operation for the source device.
However, the code only was made functional for a BLOCK backing type
and it neglected to use qemuOpenFile, instead using just open. After
the open the block lseek would find the end of the block and set the
physical value, close the fd and return.
Since the code would return 0 immediately if the source device wasn't
a BLOCK backed device, the physical would be displayed incorrectly,
such as follows in domblkinfo for a file backed source device:
Capacity: 1073741824
Allocation: 0
Physical: 0
This patch will modify the algorithm to get the physical size for other
backing types and it will make use of the qemuDomainStorageOpenStat
helper in order to open/stat the source file depending on its type.
The qemuDomainGetStatsOneBlock will no longer inhibit printing errors,
but it will still ignore them leaving the physical value set to 0.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In preparation to the code move to virnetdevtap.c, this change:
* renames virNetInterfaceStats to virNetDevTapInterfaceStats
* changes 'path' to 'ifname', to use the same vocable as other
method in virnetdevtap.c.
* Add the attributes checker
When vhostuser interfaces are used, the interface statistics
are not available in /proc/net/dev.
This change looks at the openvswitch interfaces statistics
tables to provide this information for vhostuser interface.
Note that in openvswitch world drop/error doesn't always make sense
for some interface type. When these informations are not available we
set them to 0 on the virDomainInterfaceStats.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
With current perf framework, this patch adds support and documentation
for the branch_instructions perf event.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
With kernel 3.18 (since commit 3e32cb2e0a12b6915056ff04601cf1bb9b44f967)
the "unlimited" value for cgroup memory limits has changed once again as
its byte value is now computed from a page counter.
The new "unlimited" value reported by the cgroup fs is therefore 2**51-1
pages which is (VIR_DOMAIN_MEMORY_PARAM_UNLIMITED - 3072). This results
e.g. in virsh memtune displaying 9007199254740988 instead of unlimited
for the limits.
This patch uses the value of memory.limit_in_bytes from the cgroup
memory root which is the system's "real" unlimited value for comparison.
See also libvirt commit 231656bbeb for the
history for kernel 3.12 and before.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This module will be used to track:
<domain, mac address list>
pairs. It will be important to know these mappings without
libvirt connection (that is from a JSON file), because NSS
module will use those to provide better host name translation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There are couple of places where we have a string and want to
save it to a file. Atomically. In all those places we use
virFileRewrite() but also implement the very same callback which
takes the string and write it into temp file. This makes no
sense. Unify the callbacks and move them to one place.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The path to the config file for a PCI device is conventiently stored
in a virPCIDevice object, but that object's contents aren't directly
visible outside of virpci.c, so we need to have an accessor function
for it if anyone needs to look at it.
This new function just calls fstat() (if provided with a valid fd) or
stat() (if fd is -1) and returns st_size (or -1 if there is an
error). We may decide we want this function to be more complex, and
handle things like block devices - this is a placeholder (that works)
for any more complicated function.
We have couple of functions that operate over NULL terminated
lits of strings. However, our naming sucks:
virStringJoin
virStringFreeList
virStringFreeListCount
virStringArrayHasString
virStringGetFirstWithPrefix
We can do better:
virStringListJoin
virStringListFree
virStringListFreeCount
virStringListHasString
virStringListGetFirstWithPrefix
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For a new hostdev type='scsi_host' we have a number of
required functions for managing, adding, and removing the
host device to/from guests. Provide the basic infrastructure
for these tasks.
The name "SCSIVHost" (and its variants) is chosen to avoid
conflicts with existing code named "SCSIHost" to refer to
a hostdev type='scsi' protcol='none'.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
The path prefixes for sysfs trees are always prepended by paths
beginning with a slash, making the trailing slash in the prefix
redundant.
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Only generate a warning if there is something to report.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
It is already discussed in "[RFC] daemon: remove hardcode dep on libvirt-guests" [1].
Mgmt can use means to save/restore domains on system shutdown/boot other than
libvirt-guests.service. Thus we need to specify appropriate ordering dependency between
libvirtd, domains and save/restore service. This patch takes approach suggested
in RFC and introduces a systemd target, so that ordering can be built next way:
libvirtd -> domain -> virt-guest-shutdown.target -> save-restore.service.
This way domains are decoupled from specific shutdown service via intermediate
target.
[1] https://www.redhat.com/archives/libvir-list/2016-September/msg01353.html
Use the util function virHostdevIsSCSIDevice() to simplify if
statements.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Add the function virHostdevIsSCSIDevice() which detects whether a
hostdev is a SCSI device or not.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
After commit f2bf5fbb04, MinGW strikes again. Simply print pid as any
other place after commit b7d2d4af2b.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit 94cc577807 tried fixing build on systems that did not have
SCHED_BATCH or SCHED_IDLE defined. But instead of changing it to
conditional support, it rather completely disabled the support for
setting any scheduler. Since then, such old systems are not
supported, but rather than reverting that commit, let's change that to
the conditional support. That way any addition to the list of
schedulers can follow the same style so that we're consistent in the
future.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This new function can be used to check if e.g. name of XML
node don't contains forbidden chars like "/" or "\n".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1357416
Rather than return a 0 or -1 and the *result string, return just the result
string to the caller. Alter all the callers to handle the different return.
As a side effect or result of this, it's much clearer that we cannot just
assign the returned string into the scsi_host wwnn, wwpn, and fabric_wwn
fields - rather we should fetch a temporary string, then as long as our
fetch was good, VIR_FREE what may have been there, and STEAL what we just got.
This fixes a memory leak in the virNodeDeviceCreateXML code path through
find_new_device and nodeDeviceLookupSCSIHostByWWN which will continually
call nodeDeviceSysfsGetSCSIHostCaps until the expected wwnn/wwpn is found
in the device object capabilities.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Not every system out there has syslog, that's why we check for it
in our configure script. However, in 640b58abdf while fixing
another issue, some variables and functions are called that are
defined only when syslog.h is present. But these function
calls/variables were not guarded by #ifdef-s.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This initially started as a fix of some debug printing in
virCgroupDetect. However it turned out that other places suffer
from the similar problem. While dealing with pids, esp. in cases
where we cannot use pid_t for ABI stability reasons, we often
chose an unsigned integer type. This makes no sense as pid_t is
signed.
Also, new syntax-check rule is introduced so we won't repeat this
mistake.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In both virLogParseOutput and virLogParseFilter, rather than returning
NULL, goto cleanup since it's possible that for each the first condition
passes, but the || condition doesn't and thus we leak memory.
Handling of outputs and filters has been changed in a way that splits
parsing and defining. Do the same thing for logging priority as well, this
however, doesn't need much of a preparation.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This is mainly virLogAddOutputTo* which were replaced by virLogNewOutputTo* and
the previously poorly named ones virLogParseAndDefine* functions. All of these
are unnecessary now, since all the original callers were transparently switched
to the new model of separate parsing and defining logic.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Similar to outputs, parser should do parsing only, thus the 'define' logic
is going to be stripped from virLogParseAndDefineFilters by replacing calls to
this method to virLogSetFilters instead.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since virLogParseAndDefineOutputs is going to be stripped from 'output defining'
logic, replace all relevant occurrences with virLogSetOutputs call to make the
change transparent to all original callers (daemons mostly).
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This method will eventually replace virLogParseAndDefineFilters which
currently does both parsing and defining.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This API is the entry point to output modification of the logger. Currently,
everything is done by virLogParseAndDefineOutputs. Parsing and defining will be
split into two operations both handled by this method transparently.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Abstraction added over parsing a single filter. The method parses potentially a
set of logging filters, while adding each filter logging object to a
caller-provided array.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Another abstraction added on the top of parsing a single logging output. This
method takes and parses the whole set of outputs, adding each single output
that has already been parsed into a caller-provided array. If the user-supplied
string contained duplicate outputs, only the last occurrence is taken into
account (all the others are removed from the list), so we silently avoid
duplicate logs.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Same as for outputs, introduce a new method, that is basically the same as
virLogParseAndDefineFilter with the difference that it does not define the
filter. It rather returns a newly created object that needs to be inserted into
a list and then defined separately.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Introduce a method to parse an individual logging output. The difference
compared to the virLogParseAndDefineOutput is that this method does not define
the output, instead it makes use of the virLogNewOutputTo* methods introduced
in the previous patch and just returns the virLogOutput object that has to be
added to a list of object which then can be defined as a whole via
virLogDefineOutputs. The idea remains still the same - split parsing and
defining of the logging primitives (outputs, filters).
Additionally, since virLogNewOutputTo* methods are now finally used,
ATTRIBUTE_UNUSED can be successfully removed from the methods' definitions,
since that was just to avoid compiler complaints about unused static functions.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Now that we're in the critical section, syslog connection can be re-opened
by issuing openlog, which is something that cannot be done beforehand, since
syslog keeps its file descriptor private and changing the tag earlier might
introduce a log inconsistency if something went wrong with preparing a new set
of logging outputs in order to replace the existing one.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Continuing with the effort to split output parsing and defining, these new
functions return a logging object reference instead of defining the output.
Eventually, these functions will replace the existing ones (virLogAddOutputTo*)
which will then be dropped.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Prepare a method that only defines a set of filters. It takes a list of
filters, preferably created by virLogParseFilters. The original set of filters
is reset and replaced by the new user-provided set of filters.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Prepare a method that only defines a set of outputs. It takes a list of
outputs, preferably created by virLogParseOutputs. The original set of outputs
is reset and replaced by the new user-provided set of outputs.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Outputs are a bit trickier than filters, since the user(config)-specified
set of outputs can contain duplicates. That would lead to logging the same
message twice. For compatibility reasons, we cannot just error out and forbid
the daemon to start if we find duplicate outputs which do not make sense.
Instead, we could silently take into account only the last occurrence of the
duplicate output and remove all the previous ones, so that the logger will not
try to use them when it is looping over all of its registered outputs.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In order to later split output parsing and output defining, introduce a new
function which will create a new virLogOutput object which the parser will
insert into a list with the list being eventually defined.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
There is really no reason why we could not keep journald's fd within the
journald output object the same way as we do for regular file-based outputs.
By doing this we later won't have to special case the journald-based output
(due to the fd being globally shared) when replacing the existing set of outputs
with a new one. Additionally, by making this change, we don't need the
virLogCloseJournald routine anymore, plain virLogCloseFd will suffice.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Right now virLogParse* functions are doing both parsing and defining of filters
and outputs which should be two separate operations. Since the naming is
apparently a bit poor this patch renames these functions to
virLogParseAndDefine* which eventually will be replaced by virLogSet*.
Additionally, virLogParse{Filter,Output} will be later (after the split) reused,
so that these functions do exactly what the their name suggests.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
During first stage of virlog.c refactor, commit 0b231195 forgot to remove the
macro definition along with its usage.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
If the event is already disabled, then don't bother with setting it
disabled again. Causes unnecessary error on systems that don't support
the feature anyway.
Provide the Steal API for any code paths that will desire to grab the
object array and then free it afterwards rather than relying to freeing
the whole chain from the reply.
Libvirt, on its own, shouldn't decide whether an expired lease should
stay in the custom leases database or not. It should rather rely on
the 'DEL' event from dnsmasq.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There is nothing Linux-specific in that function. Also since commit
8c3b5bf481 mingw build is broken due to
the fact that this function is not compiled in the library.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We will need this function shortly when implementing
nodeGetCPUStats in the test driver.
Signed-off-by: Tomáš Ryšavý <tom.rysavy.0@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Name it virNumaGetHostMemoryNodeset and return only NUMA nodes which
have memory installed. This is necessary as the kernel is not very happy
to set the memory cgroup setting for nodes which do not have any memory.
This would break vcpu hotplug with following message on such
configruation:
Invalid value '0,8' for 'cpuset.mems': Invalid argument
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1375268
Commit id 'a48c7141' altered how to determine if a volume was encrypted
by adding a peek at an offset into the file at a specific buffer location.
Unfortunately, all that was compared was the first "char" of the buffer
against the expect "int" value.
Restore the virReadBufInt32BE to get the complete field in order to
compare against the expected value from the qcow2EncryptionInfo or
qcow1EncryptionInfo "modeValue" field.
This restores the capability to create a volume with encryption, then
refresh the pool, and still find the encryption for the volume.
When a new filter is being defined, the return code is not handled properly,
thus triggering OOM error reporting routine (bug introduced by 51b2606f).
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Commit id 'b00d7f29' shifted the opening of the /sys/devices/intel_cqm/type
file from event enable to perf event initialization. If the file did not
exist, then an error would be written to the domain log:
2016-09-06 20:51:21.677+0000: 7310: error : virFileReadAll:1360 : Failed to open file '/sys/devices/intel_cqm/type': No such file or directory
Since the error is now handled in virPerfEventEnable by checking if the
event_attr->attrType == 0 for CMT, MBML, and MBMT events - we can just
use the Quiet API in order to not log the error we're going to throw away.
Additionally, rather than using virReportSystemError, use virReportError
and VIR_ERR_ARGUMENT_UNSUPPORTED in order to signify that support isn't there
for that type of perf event - adjust the error message as well.
There is a possibility that qemu driver frees by unreferencing its
closeCallbacks pointer as it has the only reference to the object,
while in fact not all users of CloseCallbacks called thier
virCloseCallbacksUnset.
Backtrace is the following:
Thread #1:
0 in pthread_cond_wait@@GLIBC_2.3.2 () from /lib64/libpthread.so.0
1 in virCondWait (c=<optimized out>, m=<optimized out>)
at util/virthread.c:154
2 in virThreadPoolFree (pool=0x7f0810110b50)
at util/virthreadpool.c:266
3 in qemuStateCleanup () at qemu/qemu_driver.c:1116
4 in virStateCleanup () at libvirt.c:808
5 in main (argc=<optimized out>, argv=<optimized out>)
at libvirtd.c:1660
Thread #2:
0 in virClassIsDerivedFrom (klass=0xdeadbeef, parent=0x7f0837c694d0) at util/virobject.c:169
1 in virObjectIsClass (anyobj=anyobj@entry=0x7f08101d4760, klass=<optimized out>) at util/virobject.c:365
2 in virObjectLock (anyobj=0x7f08101d4760) at util/virobject.c:317
3 in virCloseCallbacksUnset (closeCallbacks=0x7f08101d4760, vm=vm@entry=0x7f08101d47b0, cb=cb@entry=0x7f081d078fc0 <qemuProcessAutoDestroy>) at util/virclosecallbacks.c:163
4 in qemuProcessAutoDestroyRemove (driver=driver@entry=0x7f081018be50, vm=vm@entry=0x7f08101d47b0) at qemu/qemu_process.c:6368
5 in qemuProcessStop (driver=driver@entry=0x7f081018be50, vm=vm@entry=0x7f08101d47b0, reason=reason@entry=VIR_DOMAIN_SHUTOFF_SHUTDOWN, asyncJob=asyncJob@entry=QEMU_ASYNC_JOB_NONE, flags=flags@entry=0) at qemu/qemu_process.c:5854
6 in processMonitorEOFEvent (vm=0x7f08101d47b0, driver=0x7f081018be50) at qemu/qemu_driver.c:4585
7 qemuProcessEventHandler (data=<optimized out>, opaque=0x7f081018be50) at qemu/qemu_driver.c:4629
8 in virThreadPoolWorker (opaque=opaque@entry=0x7f0837c4f820) at util/virthreadpool.c:145
9 in virThreadHelper (data=<optimized out>) at util/virthread.c:206
10 in start_thread () from /lib64/libpthread.so.0
Let's reference CloseCallbacks object in virCloseCallbacksSet and
unreference in virCloseCallbacksUnset.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
In the latest glibc, major() and minor() functions are marked as
deprecated (glibc commit dbab6577):
CC util/libvirt_util_la-vircgroup.lo
util/vircgroup.c: In function 'virCgroupGetBlockDevString':
util/vircgroup.c:768:5: error: '__major_from_sys_types' is deprecated:
In the GNU C Library, `major' is defined by <sys/sysmacros.h>.
For historical compatibility, it is currently defined by
<sys/types.h> as well, but we plan to remove this soon.
To use `major', include <sys/sysmacros.h> directly.
If you did not intend to use a system-defined macro `major',
you should #undef it after including <sys/types.h>.
[-Werror=deprecated-declarations]
if (virAsprintf(&ret, "%d:%d ", major(sb.st_rdev), minor(sb.st_rdev)) < 0)
^~
In file included from /usr/include/features.h:397:0,
from /usr/include/bits/libc-header-start.h:33,
from /usr/include/stdio.h:28,
from ../gnulib/lib/stdio.h:43,
from util/vircgroup.c:26:
/usr/include/sys/sysmacros.h:87:1: note: declared here
__SYSMACROS_DEFINE_MAJOR (__SYSMACROS_FST_IMPL_TEMPL)
^
Moreover, in the glibc commit, there's suggestion to keep
ordering of including of header files as implemented here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Current implementation uses the dev.cpu.0.freq sysctl that is
provided by the cpufreq(4) framework and returns the actual
CPU frequency. However, there are environments where it's not available,
e.g. when running nested in KVM. In this case fall back to hw.clockrate
that reports CPU frequency at the boot time.
Resolves (hopefully):
https://bugzilla.redhat.com/show_bug.cgi?id=1369964
Currently the QEMU processes inherit their core dump rlimit
from libvirtd, which is really suboptimal. This change allows
their limit to be directly controlled from qemu.conf instead.
With current perf framework, this patch adds support and documentation
for more perf events, including cache misses, cache references, cpu cycles,
and instructions.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Introduce a static attr table and refactor virPerfEventEnable() for
general purpose usage.
This patch creates a static table/matrix that converts the VIR_PERF_EVENT_*
events into their respective "attr.type" and "attr.config" so that
virPerfEventEnable doesn't have the switch the calling function passes
by value the 'type'.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
libvirt uses the new_id PCI sysfs interface to bind a PCI stub driver
to a PCI device. The new_id interface is known to be buggy and racey,
hence a more deterministic interface was introduced in the 3.12 kernel:
driver_override. For more details see
https://www.redhat.com/archives/libvir-list/2016-June/msg02124.html
For more details about the driver_override interface and examples of
its usage, see
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/pci/pci-driver.c?h=v3.12&id=782a985d7af26db39e86070d28f987cad21313c0
This patch adds support for the driver_override interface by
- adding new virPCIDevice{BindTo,UnbindFrom}StubWithOverride functions
that use the driver_override interface
- renames the existing virPCIDevice{BindTo,UnbindFrom}Stub functions
to virPCIDevice{BindTo,UnbindFrom}StubWithNewid to perserve existing
behavior on new_id interface
- changes virPCIDevice{BindTo,UnbindFrom}Stub function to call one of
the above depending on availability of driver_override
The patch includes a bit of duplicate code, but allows for easily
dropping the new_id code once support for older kernels is no
longer desired.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Finding an USB device from the vendor/device values will be needed
by libxl driver to convert from vendor/device to bus/dev addresses.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1367259
Crash occurs because 'secrets' is being dereferenced in call:
if (qemuDomainSecretSetup(conn, priv, secinfo, disk->info.alias,
VIR_SECRET_USAGE_TYPE_VOLUME, NULL,
&src->encryption->secrets[0]->seclookupdef,
true) < 0)
(gdb) p *src->encryption
$1 = {format = 2, nsecrets = 0, secrets = 0x0, encinfo = {cipher_size = 0,
cipher_name = 0x0, cipher_mode = 0x0, cipher_hash = 0x0, ivgen_name = 0x0,
ivgen_hash = 0x0}}
(gdb) bt
priv=priv@entry=0x7fffc03be160, disk=disk@entry=0x7fffb4002ae0)
at qemu/qemu_domain.c:1087
disk=0x7fffb4002ae0, vm=0x7fffc03a2580, driver=0x7fffc02ca390,
conn=0x7fffb00009a0) at qemu/qemu_hotplug.c:355
Upon entry to qemuDomainAttachVirtioDiskDevice, src->encryption points
at a valid 'secret' buffer w/ nsecrets == 1; however, the call to
qemuDomainDetermineDiskChain will call virStorageFileGetMetadata
and eventually virStorageFileGetMetadataInternal where the src->encryption
was overwritten when probing the volume.
Commit id 'a48c7141' added code to virStorageFileGetMetadataInternal
to determine if the disk/volume would use/need encryption and allocated
a meta->encryption. This overwrote an existing encryption buffer
already provided by the XML
This patch adds a check for meta->encryption already present before
just allocating and overwriting an existing buffer. It then checks the
existing encryption data to ensure the XML provided format for the
disk matches the expected format read from the disk and errors if there
is a mismatch.
The first argument should be const char ** instead of
char **, because this is a search function and as such it
doesn't, and shouldn't, alter the haystack in any way.
This change means we no longer have to cast arrays of
immutable strings to arrays of mutable strings; we still
have to do the opposite, though, but that's reasonable.
Usually, this variable is used to hold the return value for a
function of ours. Well, this is not the case. Its use does not
match our pattern and therefore it is very misleading. Drop it
and define an alternative @rc variable, but only in that single
block where it is needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This variable is very misleading. We use VIR_FORCE_CLOSE to set
it to -1 and returning it even though it does not refer to a FD
at all. It merely holds 0 or -1. Drop it completely. Also, at the
same time some corner cases are fixed too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1240439
In this function we create a macvtap device and open its tap
device. Possibly multiple times. Now the thing is, if opening the
tap device fails, that is virNetDevMacVLanTapOpen() returns a
negative value, we unroll all the changes BUT return 0 fooling
caller into thinking everything went okay.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit b3e4401dc6 introduced a check to ignore an error if the guest
is already terminated. However the check accidentally compared
error.code with VIR_ERR_ERROR, which is an error level, not an error
code. Because of this, almost every error got silently ignored.
Fixes: b3e4401dc6 ("systemd: don't report an error if the guest is
already terminated")
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
The virJSONValueArraySize() function return ssize_t (with
possibly returning -1 if the passed json is not an array).
Storing the return value into size_t is possibly dangerous then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1356436
According to RFC 3721 (https://www.ietf.org/rfc/rfc3721.txt), there are
two ways to "discover" targets in/for the iSCSI environment. Discovery
is the process which allows the initiator to find the targets to which
it has access and at least one address at which each target may be
accessed.
The method currently implemented in libvirt using the virISCSIScanTargets
API is known as "SendTargets" discovery. This method is more useful when
the target IP Address and TCP port information are available, e.g. in
libvirt terms the "portal". It returns a list of targets for the portal.
From that list, the target can be found. This operation can also fill an
iSCSI node table into which iSCSI logins may occur. Commit id '56057900'
altered that filling by adding the "--op nonpersistent" since it was
not necessarily desired to perform that for non libvirt related targets.
The second method is "Static Configuration". This method not only needs
the IP Address and TCP port (e.g. portal), but also the iSCSI target name.
In libvirt terms this would be the device path field from the iSCSI pool
<source> XML. This patch implements the second methodology using that
required device path as the targetname.
The current LUKS support has a "luks" volume type which has
a "luks" encryption format.
This partially makes sense if you consider the QEMU shorthand
syntax only requires you to specify a format=luks, and it'll
automagically uses "raw" as the next level driver. QEMU will
however let you override the "raw" with any other driver it
supports (vmdk, qcow, rbd, iscsi, etc, etc)
IOW the intention though is that the "luks" encryption format
is applied to all disk formats (whether raw, qcow2, rbd, gluster
or whatever). As such it doesn't make much sense for libvirt
to say the volume type is "luks" - we should be saying that it
is a "raw" file, but with "luks" encryption applied.
IOW, when creating a storage volume we should use this XML
<volume>
<name>demo.raw</name>
<capacity>5368709120</capacity>
<target>
<format type='raw'/>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
</encryption>
</target>
</volume>
and when configuring a guest disk we should use
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/home/berrange/VirtualMachines/demo.raw'/>
<target dev='sda' bus='scsi'/>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
</encryption>
</disk>
This commit thus removes the "luks" storage volume type added
in
commit 318ebb36f1
Author: John Ferlan <jferlan@redhat.com>
Date: Tue Jun 21 12:59:54 2016 -0400
util: Add 'luks' to the FileTypeInfo
The storage file probing code is modified so that it can probe
the actual encryption formats explicitly, rather than merely
probing existance of encryption and letting the storage driver
guess the format.
The rest of the code is then adapted to deal with
VIR_STORAGE_FILE_RAW w/ VIR_STORAGE_ENCRYPTION_FORMAT_LUKS
instead of just VIR_STORAGE_FILE_LUKS.
The commit mentioned above was included in libvirt v2.0.0.
So when querying volume XML this will be a change in behaviour
vs the 2.0.0 release - it'll report 'raw' instead of 'luks'
for the volume format, but still report 'luks' for encryption
format. I think this change is OK because the storage driver
did not include any support for creating volumes, nor starting
guets with luks volumes in v2.0.0 - that only since then.
Clearly if we change this we must do it before v2.1.0 though.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Refactor the virStorageFileMatchesNNN methods so that
they don't take a struct FileFormatInfo parameter, but
instead get the actual raw dat items they needs. This
will facilitate reuse in other contexts.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To allow richer definitions of disk sources add infrastructure that will
allow to register functionst generating a JSON object based definition.
This infrastructure will then convert the definition to the proper
command line syntax and use it in cases where it's necessary. This will
allow to keep legacy definitions for back-compat when possible and use
the new definitions for the configurations requiring them.
Add support for converting objects nested in arrays with a numbering
discriminator on the command line. This syntax is used for the
object-based specification of disk source properties.
Add a modular parser that will allow to parse 'json' backing definitions
that are supported by qemu. The initial implementation adds support for
the 'file' driver.
Due to the approach qemu took to implement the JSON backing strings it's
possible to specify them in two approaches.
The object approach:
json:{ "file" : { "driver":"file",
"filename":"/path/to/file"
}
}
And a partially flattened approach:
json:{"file.driver":"file"
"file.filename":"/path/to/file"
}
Both of the above are supported by qemu and by the code added in this
commit. The current implementation de-flattens the first level ('file.')
if possible and required. Other handling may be added later but
currently only one level was possible anyways.
Since commit c4bdff19, the path to the configuration file has been constructed
in the following manner:
- if no config filename was passed to virConfLoadConfigPath, libvirt.conf was
used as default
- otherwise the filename was concatenated with
"<config_dir>/libvirt/libvirt%s%s.conf" which in admin case resulted in
"libvirt-libvirt-admin.conf.conf". Obviously, this non-existent config led to
ignoring all user settings in libvirt-admin.conf. This patch requires the
config filename to be always provided as an argument with the concatenation
being simplified.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1357364
Signed-off-by: Erik Skultety <eskultet@redhat.com>
For use with memory hotplug virQEMUBuildCommandLineJSONRecurse attempted
to format JSON arrays as bitmap on the command line. Make the formatter
function configurable so that it can be reused with different syntaxes
of arrays such as numbered arrays for use with disk sources.
This patch extracts the code and adds a parameter for the function that
will allow to plug in different formatters.
Until now the JSON->commandline convertor was used only for objects
created by qemu. To allow reusing it with disk formatter we'll need to
escape ',' as usual in qemu commandlines.
Refactor the command line generator by adding a wrapper (with
documentation) that will handle the outermost object iteration.
This patch also renames the functions and tweaks the error message for
nested arrays to be more universal.
The new function is then reused to simplify qemucommandutiltest.
As we already test that the extraction of the backing store string works
well additional tests for the backing store string parser can be made
simpler.
Export virStorageSourceNewFromBackingAbsolute and use it to parse the
backing store strings, format them using virDomainDiskSourceFormat and
match them against expected XMLs.
The symbol being missing has been reported as causing build
failures on OS X. If it's not already defined, define it to
zero so that it won't have any effect.
Partially resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1301021
If the volume xml was looking to create a luks volume take the necessary
steps in order to make that happen.
The processing will be:
1. create a temporary file (virStorageBackendCreateQemuImgSecretPath)
1a. use the storage driver state dir path that uses the pool and
volume name as a base.
2. create a secret object (virStorageBackendCreateQemuImgSecretObject)
2a. use an alias combinding the volume name and "_luks0"
2b. add the file to the object
3. create/add luks options to the commandline (virQEMUBuildLuksOpts)
3a. at the very least a "key-secret=%s" using the secret object alias
3b. if found in the XML the various "cipher" and "ivgen" options
Signed-off-by: John Ferlan <jferlan@redhat.com>
virConfGetValueLLong() errors out if the value is too big to
fit into a long long integer, but claims the supported range
to be (0,LLONG_MAX) instead of (LLONG_MIN,LLONG_MAX).
When parsing numeric values, we always store them as unsigned
unless they're negative. We can use this fact to simplify the
logic by removing a bunch of unnecessary checks.
Commit 6381c89f8c changed virConfValue to store long long
integers instead of long integers; however, the temporary variable
used in virConfParseLong() was not updated accordingly, causing
trouble for 32-bit machines.
If size_t is the same size as long long, then we can skip
some of the range checks. This avoids triggering some
bogus compiler warning messages.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virConf 'l' field is a 'signed long long', so whenever
the 'type' field is VIR_CONF_ULONG, we should explicitly cast
'l' to a 'unsigned long long' before doing range checks.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This function tries to get a ssize_t value from a config file.
But before returning it, it checks whether the value would fit in
ssize_t and if not an error is printed out among with the range
for the ssize_t type. However, on some platforms SSIZE_MAX may
actually be a signed long type:
util/virconf.c: In function 'virConfGetValueSSizeT':
util/virconf.c:1268:9: error: format '%zd' expects argument of type 'signed size_t', but argument 9 has type 'long int' [-Werror=format=]
virReportError(VIR_ERR_INTERNAL_ERROR,
^
$ grep -r SSIZE_MAX /usr/include/
/usr/include/bits/posix1_lim.h:#ifndef SSIZE_MAX
/usr/include/bits/posix1_lim.h:# define SSIZE_MAX LONG_MAX
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
IPv6 RA always contains an implicit default route via
the link-local address of the source of RA. This forces
the guest to install a route via isolated network, which
may disturb the guest's networking in case of multiple interfaces.
More info in 013427e6e7.
The validity of this route is controlled by "default [route] lifetime"
field of RA. If the lifetime is set to 0 seconds, then no route
is installed by receiver.
dnsmasq 2.67+ supports "ra-param=<interface>,<RA interval>,<default
lifetime>" option. We pass "ra-param=*,0,0"
(here, RA_interval=0 means default) to disable default gateway in RA
for isolated networks.
At least with systemd v210, NOTIFY_SOCKET is abstact, e.g.
@/org/freedesktop/systemd1/notify. sendmsg() fails on such a socket
with "Connection refused". The unix(7) man page contains the following
details wrt abstract socket addresses
abstract: an abstract socket address is distinguished (from a
pathname socket) by the fact that sun_path[0] is a null byte
('\0'). The socket's address in this namespace is given by the
additional bytes in sun_path that are covered by the specified
length of the address structure. (Null bytes in the name have
no special significance.)
So we need to be more precise about the address length, setting it to
the sizeof sa_family_t + length of address copied to sun_path instead
of setting it to the sizeof the entire sockaddr_un struct.
Resolves: https://bugzilla.opensuse.org/show_bug.cgi?id=987668
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
In an unlikely event of execve() failing, the virCommandExec()
function does not report any error, even though checks that are
at the beginning of the function are verbose when failing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently many users of virConf APIs are defining the same
macros for calling virConfValue() and then doing type
checking. To remove this repeated code, add a set of
typesafe accessor methods.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the config file does not end with a \n, the parser will append
one. When re-allocating the array though, it is mistakenly assuming
that 'len' is the length including the trailing NUL, but it does
not. So we must add 2 to len, when reallocating, not 1.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When storage secret is parsed in virStorageEncryptionSecretParse(),
virSecretLookupParseSecret() which allocates some memory. This is
however never freed.
==21711== 134 bytes in 6 blocks are definitely lost in loss record 70 of 85
==21711== at 0x4C29F80: malloc (vg_replace_malloc.c:296)
==21711== by 0xBCA0356: xmlStrndup (in /usr/lib64/libxml2.so.2.9.4)
==21711== by 0xA9F432E: virXMLPropString (virxml.c:479)
==21711== by 0xA9D25B0: virSecretLookupParseSecret (virsecret.c:70)
==21711== by 0xA9D616E: virStorageEncryptionSecretParse (virstorageencryption.c:172)
==21711== by 0xA9D66B2: virStorageEncryptionParseXML (virstorageencryption.c:281)
==21711== by 0xA9D68DF: virStorageEncryptionParseNode (virstorageencryption.c:338)
==21711== by 0xAA12575: virDomainDiskDefParseXML (domain_conf.c:7606)
==21711== by 0xAA2CAC6: virDomainDefParseXML (domain_conf.c:16658)
==21711== by 0xAA2FC75: virDomainDefParseNode (domain_conf.c:17472)
==21711== by 0xAA2FAE4: virDomainDefParse (domain_conf.c:17419)
==21711== by 0xAA2FB72: virDomainDefParseFile (domain_conf.c:17443)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If we don't HAVE_LINUX_KVM_H, we can't query /dev/kvm to discover
the limits on the number of vCPUs, so we report an error and
return a negative value instead.
As there is an explicit constructor for the special case of empty
bitmaps, we should mention that the generic constructors rejects the
creation of empty bitmaps.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Before the variable 'bits' was initialized with 0 (commit
3470cd860d), the following bug was
possible.
A function call with an empty bitmap leads to undefined
behavior. Because if 'bitmap->map_len == 0' 'unusedBits' will be <= 0
and 'sz == 1'. So the non global and non static variable 'bits' would
have never been set. Consequently the check 'bits == 0' results in
undefined behavior.
This patch clarifies the current version of the function by handling the
empty bitmap explicitly. Also, for an empty bitmap there is obviously no
bit set so we can just return -1 (indicating no bit set) right away. The
explicit check for 'bits == 0' after the loop is unnecessary because we
only get to this point if no set bit was found.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
