The reason for introducing two capabilities, one for the device itself
(cap 'mdev') and one for the parent device listing the available types
('mdev_types'), is that we should be able to do
'virsh nodedev-list --cap' not only for existing mdev devices but also
for devices that support creation of mdev devices, since one day libvirt
might be actually able to create the mdev devices in an automated way
(just like we do for NPIV/vHBA).
https://bugzilla.redhat.com/show_bug.cgi?id=1452072
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Similarly to previous commit, implement sparse streams feature
for vol-upload. This is, however, slightly different approach,
because we must implement a function that will tell us whether
we are in a data section or in a hole. But there's no magic
hidden in here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add a new --sparse switch that does nothing more than
enables the sparse streams feature for this command. Among with
the switch new helper function is introduced: virshStreamSkip().
This is the callback that is called whenever daemon sends us a
hole. In the callback we reflect the hole in underlying file by
seeking as many bytes as told.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Ideally, this would be generated, but to achieve that
corresponding XDR definitions needed to go into a different .x
file. But they belong just to the one that they are right now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virt-install and virt-manager both default to explicitly setting
"io='native'" in the disk "driver" tag. virsh, however, does not and also
does not provide an option to specify that setting at all. As a result,
disks use a different IO mechanism (the default, "threads") when attached
post-setup using virsh. Adding this option allows users to keep disk
performance consistent for disks attached at install, and those attached
afterward.
https://bugzilla.redhat.com/show_bug.cgi?id=1330940
The virsh command 'domblkinfo' returns the capacity, allocation and phisycal
size of the devices attached in a domain. Usually, this sizes are very big
and hard to understand and calculate. This commits introduce a human readable
support to check the size of each field easilly.
For example, the command before:
virsh # domblkinfo my_domain hda
Capacity: 21474836480
Allocation: 14875545600
Physical: 21474836480
and after this patch:
virsh # domblkinfo my_domain hda --human
Capacity: 20.000G
Allocation: 13.900G
Physical: 20.000G
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The parameter is reported by virDomainGetJobStats API and
VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event and it can be used to identify
the operation (migration, snapshot, ...) to which the reported
statistics belong.
https://bugzilla.redhat.com/show_bug.cgi?id=1441563
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
There are several functions in virshInit which can fail, especially
when running win32 builds under WINE. Currently virsh just exits
without reporting what error happened.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In virsh we quite often get the domain XML just to initialize the XPath
parser so that we can extract information.
Add helpers which will simplify this by wrapping the getting of the XML
and parsing it along with error reporting.
Additionally a second helper also gets the domain object from the
parameters and releases it so that functions which need the XML as only
source of data can be simplified further.
Avoid the annoying issue where the public object freeing APIs overwrite
the error set by helper functions, since they don't invoke the callback.
The new helper remembers the error only if no previous error was set.
virDomainFree has it's quirks (does not like NULL pointers, resets
libvirt errors). Replace it by a virsh helper which will allow us to
centrally fix issues with it.
The syntax-check rule will prohibit new uses of virDomainFree.
Move virshLookupDomainBy, virshCommandOptDomainBy and
virshCommandOptDomainBy to the helper file. Additionally turn the
virshCommandOptDomainBy macro into a function.
==18591== 16 bytes in 1 blocks are definitely lost in loss record 41 of 183
==18591== at 0x4C2B934: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==18591== by 0x54EBB1C: virAllocN (viralloc.c:191)
==18591== by 0x1628CA: _vshMalloc (vsh.c:136)
==18591== by 0x1344C4: virshVcpuPinQuery (virsh-domain.c:6603)
==18591== by 0x1344C4: cmdVcpuPin (virsh-domain.c:6707)
==18591== by 0x1631BF: vshCommandRun (vsh.c:1312)
==18591== by 0x12DBB1: main (virsh.c:961)
Introduce STRICT_FRAME_LIMIT_CFLAGS that will be used for
production code and RELAXED_FRAME_LIMIT_CFLAGS for tests.
Raising the limit for tests allows building them with clang
with optimizations disabled.
qemu requires that the topology equals to the maximum vcpu count.
Document this along with the API to set maximum vcpu count and the XML
element.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1426220
https://bugzilla.redhat.com/show_bug.cgi?id=1398087
Clean up the virsh man page description for --pool-create-as in order
to better describe how the various arguments are used when creating
(or defining) a logical pool.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1398087
Clean up the virsh man page description for --pool-create-as in order
to better describe how the various arguments are used when creating
(or defining) a logical pool.
Also modify the storage pool XML parsing algorithm to check for the
mismatched "name" and "source-name".
Move the --print-xml to the end of the qualifiers since it's not
properly positionally situated for both --pool-create-as and --pool-define-as
and could be miscontrued as being the 3rd positional argument.
Management tools may want to check whether the threshold is still set if
they missed an event. Add the data to the bulk stats API where they can
also query the current backing size at the same time.
When using thin provisioning, management tools need to resize the disk
in certain cases. To avoid having them to poll disk usage introduce an
event which will be fired when a given offset of the storage is written
by the hypervisor. Together with the API which will be added later, it
will allow registering thresholds for given storage backing volumes and
this event will then notify management if the threshold is exceeded.
Add bhyve support to virt-host-validate(1). It checks for the
essential kernel modules to be available so that user can actually
start VMs, have networking and console access.
It uses the kldnext(2)/kldstat(2) routines to retrieve modules list.
As bhyve is only available on FreeBSD and these routines were available
long before bhyve appeared, not adding any specific configure checks
for that.
Also, update tools/Makefile.am to add
virt-host-validate-$driver.[hc] to the build only if the
appropriate driver is enabled.
In GCC 7 there is a new warning triggered when a switch
case has a conditional statement (eg if ... else...) and
some of the code paths fallthrough to the next switch
statement. e.g.
conf/domain_conf.c: In function 'virDomainChrEquals':
conf/domain_conf.c:14926:12: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (src->targetTypeAttr != tgt->targetTypeAttr)
^
conf/domain_conf.c:14928:5: note: here
case VIR_DOMAIN_CHR_DEVICE_TYPE_CONSOLE:
^~~~
conf/domain_conf.c: In function 'virDomainChrDefFormat':
conf/domain_conf.c:22143:12: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (def->targetTypeAttr) {
^
conf/domain_conf.c:22151:5: note: here
default:
^~~~~~~
GCC introduced a __attribute__((fallthrough)) to let you
indicate that this is intentionale behaviour rather than
a bug.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Alter the formatting of each line to not give the appearance of
one long run-on sentence and to be consistent between the various
elements of collected/displayed data. The formatting should fit
within the 80 character display. This removes the need for commas
at the end of each line.
After 7f1bdec5fa our nodedev driver is capable of
determining DRM devices (DRM stands for Direct Render Manager not
Digital rights management). There is still one bit missing
though: virConnectListAllNodeDevices() is capable of listing
either all devices or just those with specified capability. Well,
DRM capability is missing there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
All options started with underscores, but we switched them to dashes
later on, making the style consistent. The latest addition, however,
did not respect that, so let's change that as well. It is tempting to
just change the name instead of adding alias, especially since nobody
ever used it, which we know thanks to the fact that it didn't work.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Function vshCommandOptStringReq() returns -1 on error and 0 on
success. The code, however, used the 'group_name' variable only if it
returned 1 (never).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
As LIBVIRT_DEBUG=4 logs only error messages and there
are no levels above it, adjusting the description in
the man page accordingly.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
This commit is similar to commit 0977ada8.The virsh manpage
lists options --uuid and --name as mutually exclusive if
option --details is specified when actually the option
--details is mutually exclusive and can't go with options
--uuid and/or --name. This patch rewords the virsh manpage
to state the correct meaning.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
Added general definitions for vstorage pool backend including
the build options to add --with-storage-vstorage checking.
In order to use vstorage as a backend for a storage pool
vstorage tools (vstorage and vstorage-mount) need to be installed.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
The recent deprecation in glibc (commit b76e065991ec) means the
module will fail to build entirely:
nss/libvirt_nss.c: In function '_nss_libvirt_gethostbyname_r':
nss/libvirt_nss.c:363:13: error: RES_USE_INET6 is deprecated [-Werror]
int af = ((_res.options & RES_USE_INET6) ? AF_INET6 : AF_INET);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This resolver option was removed shortly after being introduced,
and application using it are already broken anyway.
This patch will allow --uuid and --name in one cmd.
The pool's UUID and name will be printed side by side.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
By default, pool-info will convert sizes to human friendly units.
This patch will introduce option [--bytes].
If specified, the raw sizes will be in the output.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1373711
Add support and documentation for the [NO_]OVERWRITE flags for the
logical backend.
Update virsh.pod with a description of the process for usage of
the flags and building of the pool's volume group.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than have the Disk code having to use PARTED to determine if
there's something on the device, let's use the virStorageBackendDeviceProbe.
and only fallback to the PARTED probing if the BLKID code isn't built in.
This will also provide a mechanism for the other current caller (File
System Backend) to utilize a PARTED parsing algorithm in the event that
BLKID isn't built in to at least see if *something* exists on the disk
before blindly trying to use. The PARTED error checking will not find
file system types, but if there is a partition table set on the device,
it will at least cause a failure.
Move virStorageBackendDiskValidLabel and virStorageBackendDiskFindLabel
to storage_backend and rename/rework the code to fit the new model.
Update the virsh.pod description to provide a more generic description
of the process since we could now use either blkid or parted to find
data on the target device.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1363586
Commit id '27758859' introduced the "NO_OVERWRITE" flag check for
file system backends; however, the implementation, documentation,
and algorithm was inconsistent. For the "flag" description for the
API the flag was described as "Do not overwrite existing pool";
however, within the storage backend code the flag is described
as "it probes to determine if filesystem already exists on the
target device, renurning an error if exists".
The code itself was implemented using the paradigm to set up the
superblock probe by creating a filter that would cause the code
to only search for the provided format type. If that type wasn't
found, then the algorithm would return success allowing the caller
to format the device. If the format type already existed on the
device, then the code would fail indicating that the a filesystem
of the same type existed on the device.
The result is that if someone had a file system of one type on the
device, it was possible to overwrite it if a different format type
was specified in updated XML effectively trashing whatever was on
the device already.
This patch alters what NO_OVERWRITE does for a file system backend
to be more realistic and consistent with what should be expected when
the caller requests to not overwrite the data on the disk.
Rather than filter results based on the expected format type, the
code will allow success/failure be determined solely on whether the
blkid_do_probe calls finds some known format on the device. This
adjustment also allows removal of the virStoragePoolProbeResult
enum that was under utilized.
If it does find a formatted file system different errors will be
generated indicating a file system of a specific type already exists
or a file system of some other type already exists.
In the original virsh support commit id 'ddcd5674', the description
for '--no-overwrite' within the 'pool-build' command help output
has an ambiguous "of this type" included in the short description.
Compared to the longer description within the "Build a given pool."
section of the virsh.pod file it's more apparent that the meaning
of this flag would cause failure if a probe of the target already
has a filesystem.
So this patch also modifies the short description to just be the
antecedent of the 'overwrite' flag, which matches the API description.
This patch also modifies the grammar in virsh.pod for no-overwrite
as well as reworking the paragraph formats to make it easier to read.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The virsh manpage lists "shutdown" and "dying" as two of the possible
domain states that could be listed in the output of the "virsh list"
command. However, a domain that is being shutdown will be listed as
"in shutdown", and the "dying" state doesn't even exist (and never
has, as far as I can tell from looking through git history - it was
shown in the original import of the virsh.pod file in 2006; there was
no VIR_DOMAIN_DYING state then, there wasn't one when those lines of
virsh.pod were tweaked in 2008, and there still isn't one
today. Apparently it was just something that sounded like a good idea
to someone at some time, but was never implemented...)
Resolves: https://bugzilla.redhat.com/1408778
This patch adds support and documentation for
a generalized hardware cache event called cache_l1d
perf event.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
The virsh manpage lists options --uuid and --name as
mutually exclusive along option --table when actually
the option --table is mutually exclusive and can't go
with options --uuid and/or --name. This patch rewords the
virsh manpage to state the correct meaning.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
When setting perf events, the enabled/disabled perf events are not
listed. Since we know which events were changed it's possible to
print out the values on successful set, such as :
virsh perf Domain --enable instructions --disable cache_misses
instructions : enabled
cache_misses : disabled
Created a helper to print the messages - use the vshPrintExtra to
adhere to the --quiet|-q option being set by some script. This will
cause the get code to print nothing, but will return success/failure.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
When changing the metadata via virDomainSetMetadata, we now
emit an event to notify the app of changes. This is useful
when co-ordinating different applications read/write of
custom metadata.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new qualifier '--physical' to the 'vol-info' command in order to
dispaly the physical size of the volume. The size can differ from the
allocation value depending on the volume file time. In particular, qcow2
volumes will have a physical value larger than allocation. This also occurs
for sparse files, although for those the capacity is the largest size;
whereas, for qcow2 capacity is the logical size.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Finally, now that all APIs have been introduced, wire them up to virt-admin
and introduce daemon-log-outputs and daemon-log-filters commands.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
1ec22be5 added code that detects the maximum cpu count according to
domain capabilities. The code fell back to the old command only if the
API was not supported. If the API fails for other reasons the command
would fail. There's no point in not trying the old API in such case.
https://bugzilla.redhat.com/show_bug.cgi?id=1402690
Some arguments in vshErrorHandler, vshReadlineCompletion and
cmdSelfTest functions are not used. Mark them as such.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If the 'nleases < 0' on return, then the subsequent call to
findLeaseInJSON will not produce the expected results (passed
in as a size_t, but nleases is a ssize_t). So check if the
returned value < 0 and if so, goto cleanup.
Found by Coverity as a NEGATIVE_RETURNS event
With current perf framework, this patch adds support and documentation
for the branch_instructions perf event.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
So far the NSS module looks up only hostnames as provided by
guests themselves. However, there are some cases where this is
not enough: e.g. when there's a fresh new guest being installed
(with some generic hostname) say from a live ISO image; or some
(older) systems don't advertise their hostname in DHCP
transactions at all.
In cases like that it would be helpful if we translate domain
name as seen by libvirt too so that users can:
# virsh start $dom && ssh $dom
In order to achieve that new libvirt-guest module is introduced,
while older libvirt module maintains its current behaviour (that
is translating guest provided names into IP addresses).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The part of the code that iterates over an array of JSON values
is going to be re-used. Instead of copying it over, move it to a
separate function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The part of the code that appends found IP address into a list is
going to be re-used. Instead of copying it over, move it to a
separate function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The name of the exported functions for an NSS module is quite
fixed, it is derived from the module name:
_nss_$module_$function
Since we will create another NSS module with very similar
implementation we might as well generate the function names at
the compile time.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have couple of functions that operate over NULL terminated
lits of strings. However, our naming sucks:
virStringJoin
virStringFreeList
virStringFreeListCount
virStringArrayHasString
virStringGetFirstWithPrefix
We can do better:
virStringListJoin
virStringListFree
virStringListFreeCount
virStringListHasString
virStringListGetFirstWithPrefix
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It is already discussed in "[RFC] daemon: remove hardcode dep on libvirt-guests" [1].
Mgmt can use means to save/restore domains on system shutdown/boot other than
libvirt-guests.service. Thus we need to specify appropriate ordering dependency between
libvirtd, domains and save/restore service. This patch takes approach suggested
in RFC and introduces a systemd target, so that ordering can be built next way:
libvirtd -> domain -> virt-guest-shutdown.target -> save-restore.service.
This way domains are decoupled from specific shutdown service via intermediate
target.
[1] https://www.redhat.com/archives/libvir-list/2016-September/msg01353.html
Commit v1.3.3-181-gb028e9d7c implmented support for
VIR_MIGRATE_PARAM_PERSIST_XML migration parameter, but forgot to update
virsh.
https://bugzilla.redhat.com/show_bug.cgi?id=835300
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Although there already was an effort (b620bdee) to replace vshPrint occurrences
with vshPrintExtra due to '--quiet' flag, there were still some leftovers. So
this patch fixes them, hopefully for good.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1356881
Signed-off-by: Erik Skultety <eskultet@redhat.com>
There were a few places in our virsh* code where instead of calling vshError
on failure we called vshPrint.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
First, since commit 834c5720 the error reporting within the vshErrorHandler
doesn't work because there was a lot of renaming going on (dull mechanical
renaming without much thinking about it, yep - shame on me) and so the original
env variable VIRSH_DEBUG got renamed to VSH_DEBUG which we don't support nor
document anywhere. Second, by specifying this env variable, the last libvirt
error gets reported twice despite the fact we say the error reporting should be
deferred until the command finishes, and last but not least the vintage code's
logic is a bit 'odd', since the error would get reported iff the env variable
is set, even if the value should be equal to our DEFAULT value in which case it
doesn't make sense that we behave differently when an env variable is set to
some value and when there's no env variable at all but we use the same value
automatically as default.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Unlike the other error messages in vshInitDebug, this one relied on a hardcoded
name of a variable instead of using the prefix of the tool calling the init
routine.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1393854
Signed-off-by: Erik Skultety <eskultet@redhat.com>
After 06a7b1ff4 the @&opts_need_arg is not used anywhere. Well,
it is set but never read:
vsh.c: In function 'vshReadlineParse':
vsh.c:2658:14: warning: variable 'opts_need_arg' set but not used [-Wunused-but-set-variable]
uint64_t opts_need_arg, opts_seen;
^~~~~~~~~~~~~
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit id 'dcfdf341' passes 'opts_need_arg' and 'opts_seen' to
vshCmddefGetData, but that seems to be incorrect as those values
are not initialized properly (something at least one compiler found).
Instead the static 'const_opts_need_arg' and 'const_opts_seen' values
should be passed.
By passing unitialized values leads to not finding possible options
for simpler commands (domfsfreeze for example), where if you're in
a virsh shell using command line completion - you'll get a list of
files in your current directory instead of two options --domain and
--mountpoint (as would happen with this patch applied.
Correcting the error reporting method by using VSH_REQUIRE_OPTION
instead of virReportError
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
The 'on_shutdown' was the name in Xen, there was never such option in
libvirt's domain XML.
Reported-by: Ruben Kerkhof <ruben@rubenkerkhof.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since we're using autoconf to substitute the right value in
Makefile.am now, we can use a less generic name without running
into circular dependencies.
Adding $(prefix) in Makefile.am, as we were doing, means that
it would be prepended even when using --with-ws-plugindir,
which is something we don't want to happen.
Instead, we add it beforehand but take care that it doesn't
get expanded until make is called.
https://bugzilla.redhat.com/show_bug.cgi?id=1349898
Add the duration parameters to the virsh input/output for blkdeviotune
command and describe them in the pod file.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rework the repetitive lines to add iotune values into easier to read macros.
One to handle the SCALED values and one to handle the non scaled values.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Added description for new vcpu.<num>.halted statistics value.
While there, also added a description for vcpu.<num>.wait and
clarified the units displayed for time and wait.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
It is stated in the manual already, so let's mention the same thing in
the description to avoid causing problems.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If the VM is offline virsh attempted to at least report the pinning
information for the VM. This would not work properly now that the vcpus
can be sparse. Fix it by getting the vcpu states from the XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1375920
The fallback code used if virDomainGetVcpusFlags is not supported used
wrong XPath queries and basically did not work at all. Fix them to point
to the <domain> <vcpu> element instead of <vcpus> which was not present
until lately.
The Requires relationship is very strong, in that it prevents
a unit from running unless all the units it Requires are
running as well.
This turns out to be a problem because we want to be able to
restart libvirtd at any time without having libvirt-guests
suspend or shutdown running guests.
Turn the Requires relationship into a Wants relationship:
this way starting libvirt-guests will cause systemd to (attempt
to) start libvirtd as well, but stopping or restarting libvirtd
will not alter libvirt-guests' running state.
1. Move the declaration of const vshCmdDef *help - it should be at the
top of the "if" rather than in the middle.
2. Change a comparison from && to || - without doing so we could crash
on commands like 'virsh list' which would allow completion of some
non -- option based on whatever was found in the current working
directory and then as soon as that was completed, the next <tab>
would crash since "opt" would be returned as NULL, but the check
was dereferencing "&& opt->type"
3. Before dereferencing opt->completer, be sure opt isn't NULL.
With newer versions of libvirt Domain-0 is again visible in the list of
running guests but it should not be considered as a guest for shutdown
or suspend.
Signed-off-by Stefan Bader <stefan.bader@canonical.com>
The list file expects all guest UUIDs on the same line as the URI
which the guests run on. This does not happen when the list is
echo'ed in quotes. When stripping the quotes, newlines get transformed
into spaces. Without this, only the first guest on the list is actually
handled.
Based on a fix by Omar Siam <simar@gmx.net>
Bug-Ubuntu: http://bugs.launchpad.net/bugs/1591695
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
For one VM, it could had more than one graphical display.
Such as we coud add both vnc and spice display to a VM.
This patch introduces '--all' for showing all
possible graphical display of a active VM.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
GCC complained that
vsh.c: In function 'vshReadlineOptionsGenerator':
vsh.c:2622:29: warning: unused variable 'opt' [-Wunused-variable]
const vshCmdOptDef *opt = &cmd->opts[list_index];
^
vsh.c: In function 'vshReadlineParse':
vsh.c:2830:44: warning: 'opt' may be used uninitialized in this function
[-Wmaybe-uninitialized]
completed_list = opt->completer(autoCompleteOpaque,
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
For compatibility reasons virDomainSetVcpus needs to add vcpus as non
hotpluggable which means that the users will not be able to unplug it
after the VM has started. Add a flag that will allow to tell the API
that the unpluggable vcpus are okay.
The NSS module shouldn't rely on custom leases database to not have
entries for leases which have expired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1379895
Introduced by commit id '834c5720'.
During the code motion and creation of vsh.c, the function 'vshDeinit()'
in the (new) vsh.c was altered from whence it came in virsh.c such that
calling 'vshReadlineDeinit(ctl)' was conditional on "ctl->imode".
This causes a problem for the interactive running if the "quit" and "exit"
commands are used because 'cmdQuit' will clear ctl->imode, thus when the
interactive loop in main() of virsh.c exits because ctl->mode is clear and
virshDeinit is called which calls vshDeinit, the history file is now not
written. Conversely, if one had exited the interactive loop via pressing
<ctrl>D the file would be created because loop control is broken on EOF
and ctl->imode is not set to false.
This patch will remove the conditional call to vshReadlineDeinit and
restore the former behaviour.
Commit 6c504d6a added a note to the virsh man page about the
deprecation of 'cap' and 'weight' settings for the credit
scheduler. To this day, the default scheduler in Xen is credit
and it supports setting 'cap' and 'weight'. Remove the deprecation
notice from the note on the Xen credit scheduler.
Reported-by: Volo M. <vm@vovs.net>
Some CPU drivers (such as arm) do not provide list of CPUs libvirt
supports and just pass any CPU model from domain XML directly to QEMU.
Such driver need to return models == NULL and success from cpuGetModels.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Change the logic in a way, so that VSH_CMD_FLAG_ALIAS behaves similarly to
how VSH_OT_ALIAS for command options, i.e. there is no need for code duplication
for the alias and the aliased command structures. Along with that change,
switch any existing VSH_CMD_FLAG_ALIAS occurrences to this new format. Also,
since this patch introduces a new command structure element, adjust the
virsh-self-test test to make sure we won't ever miss to specify the '.alias'
member for an aliased command because doing that would lead to an internal
error.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The command is deprecated due to being grammatically incorrect, but for
backwards compatibility reasons cannot be removed. However, we should not
document such commands.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Recent changes extracted the command internals validation routine from
vshCmddefOptParse method which now just calls vshCmddefOptFill. Therefore, make
vshCmddefOptFill the new vshCmddefOptParse and drop the unnecessary name.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Originally introduced by commit 2432521e which correctly split
vshCmddefOptParse into command's options validation and options parsing.
However, command's 'internals' are not tied solely to .options, rather it
should be about the overall structure, therefore the validation should be
extracted from vshCmddefOptParse and performed only within our test suite, i.e.
in vshSelfTest.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
If the initial check is true the function immediately returns so there's no
need to enclose the code following the check within an 'else' block.
Also, by removing the 'else' block, the declarations need to be moved to
beginning of the function block to conform with our guidelines.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since it's used on a single place only, it can easily be replaced by the right
side of the original assignment.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The intention is to move vshCmddefCheckInternals out of vshCmddefOptParse to
our test suite. First step to do that is to enforce checking for an existing
help string (that also means it's non-empty) in a command because a command
without a help is not much of a use.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
virsh maxvcpus --type kvm output is useless on PPC. Also, in
commit e6806d79 we documented not rely on virConnectGetMaxVcpus
output. Fix the maxvcpus to use virConnectGetDomainCapabilities
now to make it useful. The call is made to use the default emulator
binary and to check for the host machine and arch which is what the
command intends to show anyway.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Just like we are running 'virsh self-test' from within our test
suite, we should run 'virt-admin self-test' too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This command should be exposed to other shells of ours.
They are gonna need it as soon as we want to test them too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When using
virsh net-event non-existing-net
the error message says that 'either --list or event type is required'
This is misleading as 'virsh net-event $valid-event-type' is not going
to work either. What is expected is 'virsh net-event --event
$valid-event-type'
This commit fixes the string in pool-event, nodedev-event, event, and
net-event.
This patch is to delete the extra wrap "\n" after failed vol-resize
error for both "Failed to change size of volume to" and "Failed to change
size of volume by". For error with wrap, there will be an extra wrap
between two errors, such as:
(1)# virsh vol-resize --pool default --vol vol-test 5M
error: Failed to change size of volume 'vol-test' to 5M
error: invalid argument: Can't shrink capacity below current capacity unless shrink flag explicitly specified
(2)# virsh vol-resize /var/lib/libvirt/images/volds --shrink --delta 10M
error: Failed to change size of volume 'volds' by 10M
error: invalid argument: can't shrink capacity below existing allocation
Unfortunately, commit a8962f70 only fixed first half of the reported issue of
virt-admin outputting negative values where unsigned int is expected by
BZ below, so this commit represents the other missing half of the fix.
resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1356769
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This patch changes the signature of vshCompleters, allowing to pass along
some data that we might want to along with the completers; for example,
we might want to pass the autocomplete vshControl along with the
completer, in case the completer requires a connection to libvirtd.
Signed-off-by: Nishith Shah <nishithshah.2211@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Having After=libvirtd.service merely ensures that, if both
services are asked to start, libvirtd.service will start
first.
What we really want is for libvirtd.service to be started
whenever libvirt-guests.service is asked to start. Adding a
Requires= relationship guarantees that will happen.
We use a separate line for each After= relationship in other
unit files: do the same here for consistency's sake, and also
to make future changes nicer to diff
libvirt-guests.service does both suspend *and* resume guests,
depending on whether it's being started or stopped: the
description should reflect this, to avoid confusing messages
during startup.
Replace "active" with "running" (to match virsh list's output)
and don't capitalize libvirt.
Call option completers if argument completion is requested using the
corresponding option completer, if it is defined.
Signed-off-by: Nishith Shah <nishithshah.2211@gmail.com>
With current perf framework, this patch adds support and documentation
for more perf events, including cache misses, cache references, cpu cycles,
and instructions.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
When we wanted to break huge and unmaintainable virsh into
smaller files first thing we did was to just move funcs into
virsh-.c files and then #include them from virsh. Having it done
this way we also needed to have them listed under EXTRA_DIST.
However, things got changed since then and now all the virsh-*.c
files are proper source files. Therefore they are listed under
virsh_SOURCES too. But for some reason we forgot to remove them
from EXTRA_DIST.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virVcpuInfo contains the vcpu number that the data refers to. Report
what's returned by the daemon rather than the sequence number as with
sparse vcpu topologies they won't match.
Use the full versions of the message, instead of composing a base
message with what was updated; the change makes the messages properly
translatable, since different parts of a sentence might need different
declensions for example.
Turn various vshPrint() informative messages into vshPrintExtra(), so
they are not printed when requesting the quiet mode; neither XML/info
outputs nor the results of commands are affected.
Also change the expected outputs of the virsh-undefine test, since virsh
is invoked in quiet mode there.
Some informative messages might still be converted (and thus silenced
when in quiet mode), but this is an improvements nonetheless.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1358179
This event is emitted when a nodedev XML definition is updated,
like when cdrom media is changed in a cdrom block device.
Also includes node device update event implementation for udev
backend, virsh nodedev-event support, and event-test support
https://bugzilla.redhat.com/show_bug.cgi?id=1366611
When commit id 'cb2e3e50' reworked the cmdSecretGetValue call to use
VIR_DISPOSE_STRING for base64, it neglected to initialize the base64
value to NULL since the cleanup: label could be reached prior to the
base64 value being set or not. This resulted in a core dump, adding
the initialization will avoid the issue.
After commit 9d479dd1 fiddled with the cmdConnect's output which used to be a
bit more verbose prior to the mentioned commit, the program flow would result
in a quite confusing error if an invalid URI has been provided:
error: Failed to connect to the admin server
Connected to the admin server
error: <some error>
The problem is that the commit mentioned above relied on the fact that
connect routine always succeeds which is not true.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In libvirt, snapshot means disk snapshot.
snapshot --live is more like VM checkpoint.
Make it clear in virsh.pod.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In our attempts to reconnect, we may create a polkit daemon.
However, it may happen that we would rewrite the variable that
already holds pointer to the agent.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1356937
Add the definitions to allow for viewing/setting cgroup period and quota
limits for IOThreads.
This is similar to the work done for emulator quota and period by
commit ids 'b65dafa' and 'e051c482'.
Being able to view/set the IOThread specific values is related to more
recent changes adding global period (commmit id '4d92d58f') and global
quota (commit id '55ecdae') definitions and qemu support (commit id
'4e17ff79' and 'fbcbd1b2'). With a global setting though, if somehow
the IOThread value in the cgroup hierarchy was set "outside of libvirt"
to a value that is incompatible with the global value.
Allowing control over IOThread specific values provides the capability
to alter the IOThread values as necessary.
The prettified JSON string already contains a newline so don't print
another one. This allows to pipe the json output (in conjunction with
the --quiet option) to files without having to truncate them afterwards.
Commit 0c56d94318 forgot to return false in the cmdConnect command
after the clean up made there.
Before (assuming you don't have uri alias for 'asdf'):
$ virsh connect asdf
error: failed to connect to the hypervisor
$ echo $?
0
After (with the same assumption):
$ virsh connect asdf
error: failed to connect to the hypervisor
error: no connection driver available for asdf
$ echo $?
1
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1356461
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The only function that we currently use from glib is g_sprintf().
That's a very big gun for such small target. Not only that, but
we've silently relied on wireshark dragging in the glib. Replace
the g_sprintf() with plain sprinf() so that we can drop the glib
dependency.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The original name 'admin_uri_default' was introduced to our code by commit
dbecb87f. However, at that time we already had a separate config file for
admin library but the commit mentioned above didn't properly adjust the
config's option name. The result is that when we're loading the config, we
check a non-existent config option (there's not much to do with the URIs
anyway, since we only allow local connection). Additionally, virt-admin's man
page documents, that the default URI can be altered by setting
admin_uri_default option. So the fix proposed by this patch leaves the
libvirt-admin.conf as is and adjusts the naming in the code as well as in the
virt-admin's man page.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In wireshark commit bbdd89b9 (contained in 2.1.0 release) they
have changed prototype of dissector function. Now it returns
number of bytes consumed by the dissector, and can get a pointer
to user specified data (which we don't use).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 834c5720 which extracted the generic functionality out of virsh
and made it available for other clients like virt-admin to make use of it, it
also introduced a bug when it renamed the original VIRSH_ environment variables
to VSH_ variables. Virt-admin of course suffers from the same bug, so this
patch modifies the generic module vsh.c to construct the correct name for
environment variables of each client from information it has.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1357363
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Well, the reason behind this change is that if the function is extended in some
way that e.g. would involve allocation we do not have a way of telling it to
the caller. More specifically, vshInitDebug only relies on some hardcoded
environment variables (by a mistake) that aren't documented anywhere so neither
virsh's nor virt-admin's documented environment variables take effect. One
possible solution would be duplicate the code for each CLI client or leave the
method be generic and provide means that it could figure out, which client
called it, thus initializing the proper environment variables but that could
involve operations that might as well fail in certain circumstances and the
caller should know that an error occurred.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
My compiler identified some variables that were set, but never
actually used. For instance, opts_required, and data_acomplete.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function tries to look up desired option for a given parsed
command. Upon successful return it also stores option position
into passed *opt_index. Now, this variable is type of int, even
though it is never ever used to store negative value. Moreover,
the variable is set from a local variable which is type of
size_t.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
To collect all balloon statistics for all guests it was necessary to make
several libvirt requests. Now it's possible to get all balloon statiscs via
single connectGetAllDomainStats call.
Signed-off-by: Derbyshev Dmitry <dderbyshev@virtuozzo.com>
There's been a forgotten fragment (copy-paste error probably) in the
virt-admin's man page referring the reader to our web page on how to construct
URIs in case of remote access, which sort of implies that we support it which
we don't at the moment, so better remove that.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
QEMU reports timestamp along with other memory statistics, but this information is not saved into domain statistics.
It could be useful to determine if the data reported is fresh or not.
Balloon statistics are not reported in hrf, so no modifications are made in qemu_monitor_text.c.
Signed-off-by: Derbyshev Dmitry <dderbyshev@virtuozzo.com>
'memtotal' in virtio drivers and qemu corresponds to 'available' in libvirt.
Because of that, 'stat-available-memory' is renamed into 'usable'.
Balloon statistics are not reported in hrf, so no modifications are made in qemu_monitor_text.c.
Signed-off-by: Derbyshev Dmitry <dderbyshev@virtuozzo.com>
The 'res' variable was only being initialized to NULL in the
if (!state) path; however, that path never used res and evenutally
res is assigned one of two results based on a pair of if then else if
conditions. If for some reason neither of those paths was taken and
the (!state) path wasn't taken, then 'res' would be indeterminate.
Found by Coverity, probably a false positive based on code paths, but
better safe than sorry for the future.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit id '740e4d70' altered the logic to fetch the sysconf values and
added a new virConfGetValueStringList which returns -1 on failure, 0 if
missing, and 1 if the value was present.
However, the caller only checked !shargv which caught Coverity's attention
since the following VIR_ALLOC_N(*shargv, 2) would be a NULL ptr deref
Signed-off-by: John Ferlan <jferlan@redhat.com>
Internally, all the data are represented as unsigned int, it is also documented
in the header file that users should use our exported constants that also
indicate that the data should be unsigned int. However, when polling for the
current server threadpool's configuration, virt-admin uses an incorrect
formatting parameter '%d' for printf. Instead, virt-admin should use formatting
parameter '%u'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1356769
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The new function works as expected, and matches the current level of
autocomplete offered, along with several other improvements like quotes
handling, multiple command completion and space handling. Now, it is easy
to introduce options completer here.
Signed-off-by: Nishith Shah <nishithshah.2211@gmail.com>
A bool 'report' has been introduced in various functions, which when set
to true will produce the error it is suppposed to produce, and when
false, will suppress the error. These functions are used in the next
patch for auto-completion.
Signed-off-by: Nishith Shah <nishithshah.2211@gmail.com>
Decompose vshCmddefOptParse into two helper functions, vshCmddefOptFill
and vshCmddefCheckInternals.
vshCmddefCheckInternals checks if the internal command definitions are
correct or not.
vshCmddefOptFill keeps track of the required options and mandatory
arguments through opts_required and opts_need_arg.
Signed-off-by: Nishith Shah <nishithshah.2211@gmail.com>
Similarly to what virsh virt-login-shell do, call virAdmInitialize prior to
initializing an event loop and initializing the error handler. Commit 97973ebb7
described and fixed an identical issue for libvirt_lxc.
Since virAdmInitialize becomes a public API after applying this patch,
the symbol is also added to public syms and the doc string of the method is
slightly enhanced analogically to virInitialize.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The VIR_STORAGE_POOL_EVENT_REFRESHED constant does not
reflect any change in the lifecycle of the storage pool.
It should thus not be part of the storage pool lifecycle
event set, but rather be a top level event in its own
right. Thus we introduce VIR_STORAGE_POOL_EVENT_ID_REFRESH
to replace it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
They can be used to tune auto-convergence algorithm (which is enabled
with VIR_MIGRATE_AUTO_CONVERGE).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Thanks to our smart option parser which automatically assigns positional
parameters the following (previously working) command fails:
virsh migrate test qemu+ssh://1.2.3.4/system tcp://1.2.3.4/
error: invalid argument: Unsupported compression method
'tcp://1.2.3.4/'
We need to make sure new options are added at the end of the list rather
than where they logically belong.
Reported by Brian Rak.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
A new hidden command for virsh that will iterate over
all command groups and commands and print help for every single one.
This involves running vshCmddefOptParse so we can get an error if
one of the command's option structure is invalid.
Crash dump in a old kvmdump format is being obsolete and cannot be loaded and
processed by crash utility since its version 6.1.0. A --memory-only option is
required in order to produce valid ELF file which can be later processed by the
crash utility. A new note is added to the dump command description.
Building with clang 3.8 triggers the following error:
CC virt_host_validate-virt-host-validate-qemu.o
virt-host-validate-qemu.c:36:11: error: initializing 'char *' with an expression of type 'const char *' discards qualifiers [-Werror,-Wincompatible-pointer-types-discards-qualifiers]
char *kvmhint = _("Check that CPU and firmware supports virtualization "
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
virt-host-validate-qemu.c:46:17: error: assigning to 'char *' from 'const char *' discards qualifiers [-Werror,-Wincompatible-pointer-types-discards-qualifiers]
kvmhint = _("Check that the 'kvm-intel' or 'kvm-amd' modules are "
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2 errors generated.
Fix by using 'const' for kvmhint declaration.
ARM/Aarch64 /proc/cpuinfo has no virtualization related flags.
Refactor the Qemu/KVM test a bit:
1) run the "for hardware virtualization" test only on plaforms with known
cpuinfo flags (x86, s390)
2) test for /dev/kvm also on platforms where no cpu flags are set
Finally Add a more generic error hint message for non-x86 plaforms
when /dev/kvm is missing.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Prior to joining the namespaces of the container, move the
process into the containers' cgroups, so that the shell that
is subsequently launched is under the container resource
constraints.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the shell must be looked up from the config setting in
/etc/libvirt/virt-login-shell.conf. This is inflexible if there
are containers where different users need different shells. Add
add a new 'auto-shell' config parameter which instructs us to
query the containers' /etc/passwd for the shell to be exec'd.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virt-login-shell environment will be initialized with
an arbitrary number of environment variables determined
by the SSH daemon and PAM configuration. Most of these are
not relevant inside the container, and at best they are
noise and at worst they'll break apps. For example if
XDG_RUNTIME_DIR is leaked to the container, it'll break
any apps using it, since the directory it points to is
only visible to the host OS filesystem, not the container
FS.
Use clearenv() to blank out everything and then set known
good values for PATH, SHELL, USER, LOGNAME HOME and TERM.
Everything else is left up to the login shell to initialize.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virDomainFree / virConnectClose methods will reset the
last error handle, so we must save the error during cleanup
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the shell config file parameter must be a list
giving the shell path and args. Allow it to be a plain
string argument as well.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently we request a login shell by passing the -l argument
to the shell. This is either hardcoded, or required to be
specified by the user in the virt-login-shell.conf file.
The standard way for login programs to request a shell run
as a login shell is to modify the argv passed to execve()
so that argv[0] contains the relative shell filename
prefixed with a zero. eg instead of doing
const char **shellargs = ["/bin/bash", "-l", NULL];
execve(shellargs[0], shellargs, env);
We should be doing
const char **shellargs = ["-bash", NULL];
execve("/bin/bash", shellargs, env);
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virt-login-shell program is supposed to look like a
regular shell to clients. Login services like sshd
expect the shell to accept a '-c cmdstring' argument to
specify a command to launch instead of presenting an
interactive prompt.
We can implement this by simply passing the '-c cmdstring'
data straight through to the real shell we use. This does
not open any security holes, since the command is not run
until we're inside the container namespaces. This allows
scp to work for users with virt-login-shell.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Extend the lxc-enter-namespace command so that it joins the
containers' cgroups before starting new namespaces. This
ensures that the commands run have the normal resource
limits applied
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Problem is, localtime_r() returns a pointer to converted time or
NULL in case of an error. But checking the glibc sources, error
will occur iff a NULL has been passed as an either of arguments
the function takes. But GCC fails to see that:
../../tools/virsh-network.c: In function 'cmdNetworkDHCPLeases':
../../tools/virsh-network.c:1370:12: error: potential null pointer dereference [-Werror=null-dereference]
ts = *localtime_r(&expirytime_tmp, &ts);
~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently if a guest has listen address 0.0.0.0 or [::] and you run
"virsh domdisplay $domain" you always get "spice://localhost:$port".
We want to print better address if someone is connected from a different
computer using "virsh -c qemu+ssh://some.host/system". This patch fixes the
behavior of virsh to print in this case "spice://some.host:$port".
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1332446
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Finally wire-up virAdmServer{Get,Set}ClientLimits APIs into virt-admin client.
Update the virt-admin's man page accordingly.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Usage of this keyword in front of function declaration that is exported via a
header file is unnecessary, since internally, this has been the default for most
compilers for quite some time.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=885380
Use vshCommandOptScaledInt instead of vshCommandOptULongLong so that
values with suffixes can be passed when bytes are being passed along.
Values for the iops parameters still need to be given in the absolute
form as they are not bytes but numbers.
Signed-off-by: Nishith Shah <nishithshah.2211@gmail.com>
cmdDetachInterface function checks for live config
flags and then passes the live/config domain xml
to virshDomainDetachInterface accordingly.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
When virHostValidateCPUFlag returns NULL, that's more an unexpected
error than the sign of missing CPU flags. Let's react to this
appropriately.
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Wire-up the public client listing API. Along with this change, a private time
simple conversion method to interpret client's timestamp obtained from server
has been added as well. Format used to for time output is as follows:
YYYY-mm-DD HH:MM:SS+ZZZZ.
Although libvirt exposes methods time-related methods through virtime.h
internally, it utilizes millisecond precision which we don't need in this case,
especially when connection timestamps use precision to seconds only.
This is just a convenience int to string conversion method.
To reflect the new API, man page has been adjusted accordingly.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The man page says: "(Re)-Connect to the hypervisor. When the shell is
first started, this is automatically run with the URI parameter
requested by the "-c" option on the command line." However, if you run:
virsh -c 'test://default' 'connect; uri'
the output will not be 'test://default'. That's because the 'connect'
command does not care about any virsh-only related settings and if it is
run without parameters, it connects with @uri == NULL. Not only that
doesn't comply to what the man page describes, but it also doesn't make
sense. It also means you aren't able to reconnect to whatever you are
connected currently.
So let's fix that in both virsh and virt-admin add a test case for it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
