My intention is to split qemuMonitorJSONBlockJob() into simpler separate
functions for every block job type. Since the error handling code is the
same for all block jobs, this patch extracts the code into a separate
function that will later be reused in more places.
With the new helper qemuMonitorJSONErrorIsClass we can save a few
function calls as we can extract the error object once.
Split out the function that checks the actual error class string into a
separate helper as it will be useful later and refactor
qemuMonitorJSONHasError to return bool type and remove few useless
checks.
Basically virJSONValueObjectHasKey are useless here since the next call
to virJSONValueObjectGet is checking the return value again (which can't
fail at that point). By removing the first check we save a function
call.
Previously we checked that the vcpu we are trying to set is in range of
the number of threads presented by qemu. The problem is that if the VM
is offline the count is 0. Since the condition subtracted 1 from the
count the number would overflow and the check would never trigger.
Change the condition for more sensible ones with specific error
messages.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1208434
Refactor the code to parse the vcpupin in a similar way the iothreadpin
code is now structured. This allows to get rid of some very strange
conditions and error messages.
Additionally since a existing bug
( https://bugzilla.redhat.com/show_bug.cgi?id=1208434 ) allows to add
vcpupin definitions for vcpus that don't exist, this patch makes the
parser to ignore all vcpupins that don't have a matching vCPU in the
definition rather than just offlined ones.
Defining a domain with the following config:
<domain ...>
...
<iothreads>1</iothreads>
<cputune>
<iothreadpin cpuset='1'/>
will result in the following config formatted back:
<domain type='kvm'>
...
<iothreads>1</iothreads>
<cputune>
<iothreadpin iothread='0' cpuset='1'/>
After restart the VM would vanish. Since our schema requires the
@iothread field to be present in <iothreadpin> make it required by the
code too.
When creating a snapshot with _REUSE_EXTERNAL when the pre-created image
does not directly link to the current active layer libvirt would
re-detect the backing chain incorrectly and it would not match with
qemu's view. Since the configuration is an operator mistake, document
that only the top layer image gets inserted.
Parallels Cloud Server supports block devices and virtual NIC
live attachment. I implemented that function for block devices so
OpenStack volume attachment is now works.
Signed-off-by: Alexander Burluka <aburluka@parallels.com>
OpenStack needs disk serial number setup because
nova boot --block-device-mapping command generates that param in
libvirt xml. I took QEMU libvirt driver behavior as a base.
QEMU driver skips inability to set serial and continues work.
So Parallels driver will ignore this param too and let domain
boot.
This patch adds checks for empty bitmaps right after the calls of
virBitmapParse. These only include spots where set API's are called and
where domain's XML is parsed.
Also, it partially reverts commit 983f5a which added a check for
invalid nodeset "0,^0" into virBitmapParse function. This change broke
the logic, as an empty bitmap should not cause an error.
https://bugzilla.redhat.com/show_bug.cgi?id=1210545
On arm, we probe for virtio-*-pci devices, but use their
virtio-*-device variants.
Set the capabilities based on the -device variants as well,
to make them work with qemus with the PCI devices compiled out.
When pre-creating storage for domains, we need to find corresponding
disk in the XML on the destination (domain XML may differ there, e.g.
disk is accessible under different path). For better debugging, I'm
printing all info I received on a disk. But there was a typo when
printing the disk capacity: "%lluu" instead of "%llu".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The problem with the previous implementation is,
even when qemuMigrationUpdateJobStatus() detects a migration job
has completed, it will do a sleep for 50 ms (which is unnecessary
and only adds up to the VM pause time).
Signed-off-by: Xing Lin <xinglin@cs.utah.edu>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Future IOThread setting patches would copy the code anyway, so create
and generalize the adding of pindef for the vcpu and the pinning of the
thread into their own APIs.
Add static virNetDevGetifaddrsAddress to attempt to get the interface
IP address. If getifaddrs is not supported, fall back to
virNetDevGetIPv4AddressIoctl to get the IP address.
This allows IPv6 addresses to be used for <listen type='network>
with device-backed networks.
https://bugzilla.redhat.com/show_bug.cgi?id=1192318
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Rename it to virNetDevGetIPv4AddressIoctl and make
virNetDevGetIPAddress a wrapper around it, allowing
other ways of getting the address to be implemented,
and still falling back to the old method.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
PCS doesn't store domain config in managed save state file.
It's forbidden to change config for VMs in this state.
It's possible to change config for containers, but after
restoring domain will have that new config, not a config,
which domain had at the moment of virDomainManagedSave.
So we need to handle this case differently from other states.
Let's forbid this operation, if config is changed and if it's
not changed - just do nothing.
Openstack/nova calls virDomainDefineXML on resume with
current domain config, so we can't forbid this operation
in managed save state.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
We should add input devices with proper bus,
not VIR_DOMAIN_INPUT_BUS_XEN.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Handle input devices in virDomainDefParseXML properly
in case of parallels containers and VMs.
Parallels containers support only
VIR_DOMAIN_INPUT_BUS_PARALLELS. And if VNC is enabled
we should add implicit mouse and keyboard.
For VMs we should add implicit PS/2 mouse and
keyboard.
BTW, is it worth to refactor code and move
all this code to drivers, to *DomainDefPostParse
functions?
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add VIR_DOMAIN_INPUT_BUS_PARALLELS device type
to handle domain configuration properly for
parallels containers, when VNC is enabled.
When domain configuration has at least one
'graphics', there should be mouse and keyboard.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Fix function virDomainVideoDefaultType for
parallels VMs and containers. It should return
VGA for VMs and VIR_DOMAIN_VIDEO_TYPE_PARALLELS
for containers.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
We support VNC for containers to have the same
interface with VMs. At this moment it just renders
linux text console.
Of course we don't pass any physical devices and
don't emulate virtual devices. Our VNC server
renders text from terminal master and sends
input events from VNC client to terminal.
So add special video type VIR_DOMAIN_VIDEO_TYPE_PARALLELS
for these pseudo-devices.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Network adapter model has no sense for container,
so we shouldn't set it to e1000 in
parallelsDomainDeviceDefPostParse.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
We handle this parameter for VMs while defining
domains, so let's get this property from PCS and
set corresponding field of virDomainNetDef in
prlsdkLoadDomains function.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Call virDomainDefAddImplicitControllers to add disk
controllers, so virDomainDef, filled by this function
will look exactly like the one returned by virDomainDefParseString.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Implement virDomainManagedSave api function. In PCS
this feature called "suspend". You can suspend VM or
CT while it is in running or paused state. And after
resuming (or starting) it will have the same state, as
before suspend.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Split function prlsdkDomainChangeState into
prlsdkDomainChangeStateLocked and prlsdkDomainChangeState.
So it can be used from places, where virDomainObj already
found and locked.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Return value of functions prlsdkStart/Kill/Stop e.t.c.
is PRL_RESULT in parallels_sdk.c and int in parallels_sdk.h.
PRL_RESULT is int, so compiler didn't report errors.
Let's fix the difference.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Future IOThread setting patches would copy the code anyway, so create
and generalize a delete cgroup and pindef for the vcpu into its own API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Future IOThread setting patches would copy the code anyway, so create
and generalize the add the vcpu to a cgroup into its own API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Create a new common API to replace the virCgroupNew{Vcpu|Emulator|IOThread}
API's using an emum to generate the cgroup name
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1206521
If the backend driver updates the pool available and/or allocation values,
then the storage_driver VolCreateXML, VolCreateXMLFrom, and VolDelete APIs
should not change the value; otherwise, it will appear as if the values
were "doubled" for each change. Additionally since unsigned arithmetic will
be used depending on the size and operation, either or both values could be
appear to be much larger than they should be (in the EiB range).
Currently only the disk pool updates the values, but other pools could.
Assume a "fresh" disk pool of 500 MiB using /dev/sde:
$ virsh pool-info disk-pool
...
Capacity: 509.88 MiB
Allocation: 0.00 B
Available: 509.84 MiB
$ virsh vol-create-as disk-pool sde1 --capacity 300M
$ virsh pool-info disk-pool
...
Capacity: 509.88 MiB
Allocation: 600.47 MiB
Available: 16.00 EiB
Following assumes disk backend updated to refresh the disk pool at deletion
of primary partition as well as extended partition:
$ virsh vol-delete --pool disk-pool sde1
Vol sde1 deleted
$ virsh pool-info disk-pool
...
Capacity: 509.88 MiB
Allocation: 9.73 EiB
Available: 6.27 EiB
This patch will check if the backend updated the pool values and honor that
update.
Commit id '471e1c4e' only considered updating the pool if the extended
partition was removed. As it turns out removing a primary partition
would also need to update the freeExtent list otherwise the following
sequence would fail (assuming a "fresh" disk pool for /dev/sde of 500M):
$ virsh pool-info disk-pool
...
Capacity: 509.88 MiB
Allocation: 0.00 B
Available: 509.84 MiB
$ virsh vol-create-as disk-pool sde1 --capacity 300M
$ virsh vol-delete --pool disk-pool sde1
$ virsh vol-create-as disk-pool sde1 --capacity 300M
error: Failed to create vol sde1
error: internal error: no large enough free extent
$
This patch will refresh the pool, rereading the partitions, and
return
https://bugzilla.redhat.com/show_bug.cgi?id=1073305
When creating a volume in a pool, the creation allows the 'capacity'
value to be larger than the available space in the pool. As long as
the 'allocation' value will fit in the space, the volume will be created.
However, resizing the volume checks were made with the new absolute
capacity value against existing capacity + the available space without
regard for whether the new absolute capacity was actually allocating
space or not. For example, a pool with 75G of available space creates
a volume of 10G using a capacity of 100G and allocation of 10G will succeed;
however, if the allocation used a capacity of 10G instead and then tried
to resize the allocation to 100G the code would fail to allow the backend
to try the resize.
Furthermore, when updating the pool "available" and "allocation" values,
the resize code would just "blindly" adjust them regardless of whether
space was "allocated" or just "capacity" was being adjusted. This left
a scenario whereby a resize to 100G would fail; however, a resize to 50G
followed by one to 100G would both succeed. Again, neither was adjusting
the allocation value, just the "capacity" value.
This patch adds more logic to the resize code to understand whether the
new capacity value is actually "allocating" space as well and whether it
shrinking or expanding. Since unsigned arithmatic is involved, the possibility
that we adjust the pool size values incorrectly is probable.
This patch also ensures that updates to the pool values only occur if we
actually performed the allocation.
NB: The storageVolDelete, storageVolCreateXML, and storageVolCreateXMLFrom
each only updates the pool allocation/availability values by the target
volume allocation value.
Support for drive-reopen was never present in the upstream code so we
don't need to pause the VM when doing the block pivot. Kill all the
code related to this semi-upstream artifact.
lxc-enter-namespace stopped working on recent kernels (at least 3.19+)
due to /proc/PID/ns/* file descriptors being opened RW. From outside
the namespace these can only be opened RO.
/var/run may reside on a tmpfs and we fail to create the PID file if
/var/run/lxc does not exist.
Since commit 0a8addc1, the lxc driver's state directory isn't
automatically created before starting a domain. Now, the lxc driver
makes sure the state directory exists when it initializes.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
rfc3986 states that the separator in URI path is a single slash.
Multiple slashes may potentially lead to different resources and thus we
should not remove them.
Like we are doing in qemu driver (ea576ee543), lets call
virNumaSetupMemoryPolicy() only if really needed. Problem is, if
we numa_set_membind() child, there's no way to change it from the
daemon afterwards. So any later attempts to change the pinning
will fail. But in very weird way - CGroups will be set, but due
to membind child will not allocate memory from any other node.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
131,088 bytes in 16 blocks are definitely lost in loss record 2,174 of 2,176
at 0x4C29BFD: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x4C2BACB: realloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x52A026F: virReallocN (viralloc.c:245)
by 0x52BFCB5: saferead_lim (virfile.c:1268)
by 0x52C00EF: virFileReadLimFD (virfile.c:1328)
by 0x52C019A: virFileReadAll (virfile.c:1351)
by 0x52A5D4F: virCgroupGetValueStr (vircgroup.c:763)
by 0x1DDA0DA3: qemuRestoreCgroupState (qemu_cgroup.c:805)
by 0x1DDA0DA3: qemuConnectCgroup (qemu_cgroup.c:857)
by 0x1DDB7BA1: qemuProcessReconnect (qemu_process.c:3694)
by 0x52FD171: virThreadHelper (virthread.c:206)
by 0x82B8DF4: start_thread (pthread_create.c:308)
by 0x85C31AC: clone (clone.S:113)
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Since the holdtime is not supported by VBOX SDK, it's being simulated
by sleeping before sending the key-up codes. The key-up codes are
auto-generated based on XT codeset rules (adding of 0x80 to key-down)
which results in the same behavior as for QEMU implementation.
https://bugzilla.redhat.com/show_bug.cgi?id=1198645
Once upon a time, there was a little domain. And the domain was pinned
onto a NUMA node and hasn't fully allocated its memory:
<memory unit='KiB'>2355200</memory>
<currentMemory unit='KiB'>1048576</currentMemory>
<numatune>
<memory mode='strict' nodeset='0'/>
</numatune>
Oh little me, said the domain, what will I do with so little memory.
If I only had a few megabytes more. But the old admin noticed the
whimpering, barely audible to untrained human ear. And good admin he
was, he gave the domain yet more memory. But the old NUMA topology
witch forbade to allocate more memory on the node zero. So he
decided to allocate it on a different node:
virsh # numatune little_domain --nodeset 0-1
virsh # setmem little_domain 2355200
The little domain was happy. For a while. Until bad, sharp teeth
shaped creature came. Every process in the system was afraid of him.
The OOM Killer they called him. Oh no, he's after the little domain.
There's no escape.
Do you kids know why? Because when the little domain was born, her
father, Libvirt, called numa_set_membind(). So even if the admin
allowed her to allocate memory from other nodes in the cgroups, the
membind() forbid it.
So what's the lesson? Libvirt should rely on cgroups, whenever
possible and use numa_set_membind() as the last ditch effort.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This new internal API checks if given CGroup controller is
available. It is going to be needed later when we need to make a
decision whether pin domain memory onto NUMA nodes using cpuset
CGroup controller or using numa_set_membind().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently we check qemuCaps before starting the block job. But qemuCaps
isn't available on a stopped domain, which means we get a misleading
error message in this case:
# virsh domstate example
shut off
# virsh blockjob example vda
error: unsupported configuration: block jobs not supported with this QEMU binary
Move the qemuCaps check into the block job so that we are guaranteed the
domain is running.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
qemuMigrationCookieAddNBD is usually called from within an async
MIGRATION_OUT or MIGRATION_IN job, so it needs to start a nested job.
(The one exception is during the Begin phase when change protection
isn't enabled, but qemuDomainObjEnterMonitorAsync will behave the same
as qemuDomainObjEnterMonitor in this case.)
This bug was encountered with a libvirt client that repeatedly queries
the disk mirroring block job info during a migration. If one of these
queries occurs just as the Perform migration cookie is baked, libvirt
crashes.
Relevant logs are as follows:
6701: warning : qemuDomainObjEnterMonitorInternal:1544 : This thread seems to be the async job owner; entering monitor without asking for a nested job is dangerous
[1] 6701: info : qemuMonitorSend:972 : QEMU_MONITOR_SEND_MSG: mon=0x7fefdc004700 msg={"execute":"query-block","id":"libvirt-629"}
[2] 6699: info : qemuMonitorIOWrite:503 : QEMU_MONITOR_IO_WRITE: mon=0x7fefdc004700 buf={"execute":"query-block","id":"libvirt-629"}
[3] 6704: info : qemuMonitorSend:972 : QEMU_MONITOR_SEND_MSG: mon=0x7fefdc004700 msg={"execute":"query-block-jobs","id":"libvirt-630"}
[4] 6699: info : qemuMonitorJSONIOProcessLine:203 : QEMU_MONITOR_RECV_REPLY: mon=0x7fefdc004700 reply={"return": [...], "id": "libvirt-629"}
6699: error : qemuMonitorJSONIOProcessLine:211 : internal error: Unexpected JSON reply '{"return": [...], "id": "libvirt-629"}'
At [1] qemuMonitorBlockStatsUpdateCapacity sends its request, then waits
on mon->notify. At [2] the request is written out to the monitor socket.
At [3] qemuMonitorBlockJobInfo sends its request, and also waits on
mon->notify. The reply from the first request is received at [4].
However, qemuMonitorJSONIOProcessLine is not expecting this reply since
the second request hadn't completed sending. The reply is dropped and an
error is returned.
qemuMonitorIO signals mon->notify twice during its error handling,
waking up both of the threads waiting on it. One of them clears mon->msg
as it exits qemuMonitorSend; the other crashes:
qemuMonitorSend (mon=0x7fefdc004700, msg=<value optimized out>) at qemu/qemu_monitor.c:975
975 while (!mon->msg->finished) {
(gdb) print mon->msg
$1 = (qemuMonitorMessagePtr) 0x0
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
In order to change an existing domain we delete all existing devices and add
new from scratch. In case of network devices we should also delete corresponding
virtual networks (if any) before removing actual devices from xml. In the patch,
we do it by extending prlsdkDoApplyConfig with a new parameter, which stands for
old xml, and calling prlsdkDelNet every time old xml is specified.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The close callbacks hash are keyed by a UUID-string, but
virCloseCallbacksRun was attempting to remove them by raw UUID. This
patch ensures the callback entries are removed by UUID-string as well.
This bug caused problems when guest migrations were abnormally aborted:
# timeout --signal KILL 1 \
virsh migrate example qemu+tls://remote/system \
--verbose --compressed --live --auto-converge \
--abort-on-error --unsafe --persistent \
--undefinesource --copy-storage-all --xml example.xml
Killed
# virsh migrate example qemu+tls://remote/system \
--verbose --compressed --live --auto-converge \
--abort-on-error --unsafe --persistent \
--undefinesource --copy-storage-all --xml example.xml
error: Requested operation is not valid: domain 'example' is not being migrated
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
If a VM migration is aborted, a disk mirror may be failed by QEMU before
libvirt has a chance to cancel it. The disk->mirrorState remains at
_ABORT in this case, and this breaks subsequent mirrorings of that disk.
We should instead check the mirrorState directly and transition to _NONE
if it is already aborted. Do the check *after* aborting the block job in
QEMU to avoid a race.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
If virCloseCallbacksSet fails, qemuMigrationBegin must return NULL to
indicate an error occurred.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
The destination libvirt daemon in a migration may segfault if the client
disconnects immediately after the migration has begun:
# virsh -c qemu+tls://remote/system list --all
Id Name State
----------------------------------------------------
...
# timeout --signal KILL 1 \
virsh migrate example qemu+tls://remote/system \
--verbose --compressed --live --auto-converge \
--abort-on-error --unsafe --persistent \
--undefinesource --copy-storage-all --xml example.xml
Killed
# virsh -c qemu+tls://remote/system list --all
error: failed to connect to the hypervisor
error: unable to connect to server at 'remote:16514': Connection refused
The crash is in:
1531 void
1532 qemuDomainObjEndJob(virQEMUDriverPtr driver, virDomainObjPtr obj)
1533 {
1534 qemuDomainObjPrivatePtr priv = obj->privateData;
1535 qemuDomainJob job = priv->job.active;
1536
1537 priv->jobs_queued--;
Backtrace:
#0 at qemuDomainObjEndJob at qemu/qemu_domain.c:1537
#1 in qemuDomainRemoveInactive at qemu/qemu_domain.c:2497
#2 in qemuProcessAutoDestroy at qemu/qemu_process.c:5646
#3 in virCloseCallbacksRun at util/virclosecallbacks.c:350
#4 in qemuConnectClose at qemu/qemu_driver.c:1154
...
qemuDomainRemoveInactive calls virDomainObjListRemove, which in this
case is holding the last remaining reference to the domain.
qemuDomainRemoveInactive then calls qemuDomainObjEndJob, but the domain
object has been freed and poisoned by then.
This patch bumps the domain's refcount until qemuDomainRemoveInactive
has completed. We also ensure qemuProcessAutoDestroy does not return the
domain to virCloseCallbacksRun to be unlocked in this case. There is
similar logic in bhyveProcessAutoDestroy and lxcProcessAutoDestroy
(which call virDomainObjListRemove directly).
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
==19015== 968 (416 direct, 552 indirect) bytes in 1 blocks are definitely lost in loss record 999 of 1,049
==19015== at 0x4C2C070: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==19015== by 0x52ADF14: virAllocVar (viralloc.c:560)
==19015== by 0x5302FD1: virObjectNew (virobject.c:193)
==19015== by 0x1DD9401E: virQEMUDriverConfigNew (qemu_conf.c:164)
==19015== by 0x1DDDF65D: qemuStateInitialize (qemu_driver.c:666)
==19015== by 0x53E0823: virStateInitialize (libvirt.c:777)
==19015== by 0x11E067: daemonRunStateInit (libvirtd.c:905)
==19015== by 0x53201AD: virThreadHelper (virthread.c:206)
==19015== by 0xA1EE1F2: start_thread (in /lib64/libpthread-2.19.so)
==19015== by 0xA4EFC8C: clone (in /lib64/libc-2.19.so)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
==19015== 8 bytes in 1 blocks are definitely lost in loss record 34 of 1,049
==19015== at 0x4C29F80: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==19015== by 0x4C2C32F: realloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==19015== by 0x52AD888: virReallocN (viralloc.c:245)
==19015== by 0x52AD97E: virExpandN (viralloc.c:294)
==19015== by 0x52ADC51: virInsertElementsN (viralloc.c:436)
==19015== by 0x5335864: virDomainVirtioSerialAddrSetAddController (domain_addr.c:816)
==19015== by 0x53358E0: virDomainVirtioSerialAddrSetAddControllers (domain_addr.c:839)
==19015== by 0x1DD5513B: qemuDomainAssignVirtioSerialAddresses (qemu_command.c:1422)
==19015== by 0x1DD55A6E: qemuDomainAssignAddresses (qemu_command.c:1711)
==19015== by 0x1DDA5818: qemuProcessStart (qemu_process.c:4616)
==19015== by 0x1DDF1807: qemuDomainObjStart (qemu_driver.c:7265)
==19015== by 0x1DDF1A66: qemuDomainCreateWithFlags (qemu_driver.c:7320)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
==19015== 1,064 (656 direct, 408 indirect) bytes in 2 blocks are definitely lost in loss record 1,002 of 1,049
==19015== at 0x4C2C070: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==19015== by 0x52AD74B: virAlloc (viralloc.c:144)
==19015== by 0x52B47CA: virCgroupNew (vircgroup.c:1057)
==19015== by 0x52B53E5: virCgroupNewVcpu (vircgroup.c:1451)
==19015== by 0x1DD85A40: qemuSetupCgroupForVcpu (qemu_cgroup.c:1013)
==19015== by 0x1DDA66EA: qemuProcessStart (qemu_process.c:4844)
==19015== by 0x1DDF1807: qemuDomainObjStart (qemu_driver.c:7265)
==19015== by 0x1DDF1A66: qemuDomainCreateWithFlags (qemu_driver.c:7320)
==19015== by 0x1DDF1ACD: qemuDomainCreate (qemu_driver.c:7337)
==19015== by 0x53F87EA: virDomainCreate (libvirt-domain.c:6820)
==19015== by 0x12690A: remoteDispatchDomainCreate (remote_dispatch.h:3481)
==19015== by 0x126827: remoteDispatchDomainCreateHelper (remote_dispatch.h:3457)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The 'checkPool' callback was originally part of the storageDriverAutostart function,
but the pools need to be checked earlier during initialization phase,
otherwise we can't start a domain which mounts a volume after the
libvirtd daemon restarted. This is because qemuProcessReconnect is called
earlier than storageDriverAutostart. Therefore the 'checkPool' logic has been
moved to storagePoolUpdateAllState which is called inside storageDriverInitialize.
We also need a valid 'conn' reference to be able to execute 'refreshPool'
during initialization phase. Though it isn't available until storageDriverAutostart
all of our storage backends do ignore 'conn' pointer, except for RBD,
but RBD doesn't support 'checkPool' callback, so it's safe to pass
conn = NULL in this case.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1177733
This patch introduces new virStorageDriverState element stateDir.
Also adds necessary changes to storageStateInitialize, so that
directories initialization becomes more generic.
The nodedev-detach can report the name of the domain using the device
just the way nodedev-reattach does it.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The error output of snapshot-revert should be more friendly.
There is no need to show virDomainRevertToSnapshot to user.
virReportError already includes __FUNCTION__ information in a
separate member of the struct, so repeating it in the message is
redundant and leads to situations where higher level code ends up
reporting the lower level name. We correctly converted the error
output making it more succinct and user-friendly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1086726
Before this patch, when connected via vCenter, the free memory returned
was from the resorcePool (usually a cluster). This is in conflict with
e.g esxNodeGetInfo which always pulls info from the ESX host.
Since libvirt ESX driver works primarily with ESX hosts, this patch
changes esxNodeGetFreeMemory to pull that information from ESX host so
it's consistent with behavior of esxNodeGetInfo.
Introduce virStoragePoolSaveState to properly format the state XML in
the same manner as virStoragePoolDefFormat, except for adding a
<poolstate> ... </poolstate> around the definition. This is similar to
virNetworkObjFormat used to save the live/active network information.
When modifying config/status XML, it might be handy to include some
additional XML elements (e.g. <poolstate>). In order to do so,
introduce new formatting function virStoragePoolDefFormatBuf and make
virStoragePoolDefFormat call it.
Recent testing on large memory systems revealed a bug in the Xen xl
tool's freemem() function. When autoballooning is enabled, freemem()
is used to ensure enough memory is available to start a domain,
ballooning dom0 if necessary. When ballooning large amounts of memory
from dom0, freemem() would exceed its self-imposed wait time and
return an error. Meanwhile, dom0 continued to balloon. Starting the
domain later, after sufficient memory was ballooned from dom0, would
succeed. The libvirt implementation in libxlDomainFreeMem() suffers
the same bug since it is modeled after freemem().
In the end, the best place to fix the bug on the Xen side was to
slightly change the behavior of libxl_wait_for_memory_target().
Instead of failing after caller-provided wait_sec, the function now
blocks as long as dom0 memory ballooning is progressing. It will return
failure only when more memory is needed to reach the target and wait_sec
have expired with no progress being made. See xen.git commit fd3aa246.
There was a dicussion on how this would affect other libxl apps like
libvirt
http://lists.xen.org/archives/html/xen-devel/2015-03/msg00739.html
If libvirt containing this patch was build against a Xen containing
the old libxl_wait_for_memory_target() behavior, libxlDomainFreeMem()
will fail after 30 sec and domain creation will be terminated.
Without this patch and with old libxl_wait_for_memory_target() behavior,
libxlDomainFreeMem() does not succeed after 30 sec, but returns success
anyway. Domain creation continues resulting in all sorts of fun stuff
like cpu soft lockups in the guest OS. It was decided to properly fix
libxl_wait_for_memory_target(), and if anything improve the default
behavior of apps using the freemem reference impl in xl.
xl was patched to accommodate the change in libxl_wait_for_memory_target()
with xen.git commit 883b30a0. This patch does the same in the libxl
driver. While at it, I changed the logic to essentially match
freemem() in $xensrc/tools/libxl/xl_cmdimpl.c. It was a bit cleaner
IMO and will make it easier to spot future, potentially interesting
divergences.
Dependant is flagged as wrong in US dictionary (only valid in UK
dictionary, and even then, it has only the financial sense and not the
inter-relatedness sense that we are more prone to be wanting throughout
code).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
'virPCIDeviceList' is actually an array. Removing one element makes the
rest of the element move.
Use while loop, increase index only when not virPCIDeviceListDel(pcidevs, dev)
Signed-off-by: Huanle Han <hanxueluo@gmail.com>
Instead of always using controller 0 and incrementing port number,
respect the maximum port numbers of controllers and use all of them.
Ports for virtio consoles are quietly reserved, but not formatted
(neither in XML nor on QEMU command line).
Also rejects duplicate virtio-serial addresses.
https://bugzilla.redhat.com/show_bug.cgi?id=890606https://bugzilla.redhat.com/show_bug.cgi?id=1076708
Test changes:
* virtio-auto.args
Filling out the port when just the controller is specified.
switched from using
maxport + 1
to:
first free port on the controller
* virtio-autoassign.args
Filling out the address when no <address> is specified.
Started using all the controllers instead of 0, also discards
the bus value.
* xml -> xml output of virtio-auto
The port assignment is no longer done as a part of XML parsing,
so the unspecified values stay 0.
Create a sorted array of virtio-serial controllers.
Each of the elements contains the controller index
and a bitmap of available ports.
Buses are not tracked, because they aren't supported by QEMU.
If the call to virStorageBackendISCSIGetHostNumber failed, we set
retval = -1, but yet still called virStorageBackendSCSIFindLUs.
Need to add a goto cleanup - while at it, adjust the logic to
initialize retval to -1 and only changed to 0 (zero) on success.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Don't supercede the error message virStorageBackendSCSIFindLUs as the
message such as "error: Failed to find LUs on host 60: ..." is not overly
clear as to what the real problem might be.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Make XML definition saving more generic by moving the common code into
virStoragePoolSaveXML and leave case specific code to
PoolSave{Status,Config,...} functions.
In order to be able to use 'checkPool' inside functions which do not
have any connection reference, 'conn' attribute needs to be discarded
from the checkPool's signature, since it's not used by any storage backend
anyway.
https://bugzilla.redhat.com/show_bug.cgi?id=1206479
As described in virDomainBlockCopy() parameters description, the
VIR_DOMAIN_BLOCK_COPY_GRANULARITY parameter may require the value to
have some specific attributes (e.g. be a power of two or fall within a
certain range). And in qemu, a power of two is required. However, our
code does not check that and let qemu operation fail. Moreover, the
virsh man page is not as exact as it could be in this respect.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When we shutdown/reboot a guest using agent-mode, if the guest itself blocks infinitely,
libvirt would block in qemuAgentShutdown() forever.
Thus, we set a timeout for shutdown/reboot, from our experience, 60 seconds would be fine.
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
virDomainHasDiskMirror() currently detects only jobs that add the mirror
elements. Since some operations like migration are interlocked by
existing block jobs on the given domain the check needs to be
instrumented to check regular jobs too.
This patch renames virDomainHasDiskMirror to virDomainHasDiskBlockjob
and adds an argument that allows to select that it returns true only for
block copy jobs as those interlock making the domain persistent.
Other two uses trigger on any block job type.
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
If any disk of a VM was involved in a (copy) block job we refused to do
a snapshot. As not only copy jobs interlock snapshots and the
interlocking is applicable to individual disks only we can make the
check in a more individual fashion and interlock all block job types
supported by libvirt.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1203628
In the order of appearance:
* MAX_LISTEN - never used
added by 23ad665c (qemud) and addec57 (lock daemon)
* NEXT_FREE_CLASS_ID - never used, added by 07d1b6b
* virLockError - never used, added by eb8268a4
* OPENVZ_MAX_ARG, CMDBUF_LEN, CMDOP_LEN
unused since the removal of ADD_ARG_LIT in d8b31306
* QEMU_NB_PER_CPU_STAT_PARAM - unused since 897808e
* QEMU_CMD_PROMPT, QEMU_PASSWD_PROMPT - unused since 1dc10a7
* TEST_MODEL_WORDSIZE - unused since c25c18f7
* TEMPDIR - never used, added by 714bef5
* NSIG - workaround around old headers
added by commit 60ed1d2
unused since virExec was moved by commit 02e8691
* DO_TEST_PARSE - never used, added by 9afa006
* DIFF_MSEC, GETTIMEOFDAY - unused since eee6eb6
Two places would call to qemuPrepareCpumap() with priv->autoNodeset to
convert it to a cpuset. Remove the function and use the prepared cpuset
automatically.
When the default cpuset or automatic numa placement is used libvirt
would place the whole parent cgroup in the specified cpuset. This then
disallowed to re-pin the vcpus to a different cpu.
This patch pins only the vcpu threads to the default cpuset and thus
allows to re-pin them later.
The following config would fail to start:
<domain type='kvm'>
...
<vcpu placement='static' cpuset='0-1' current='2'>4</vcpu>
<cputune>
<vcpupin vcpu='0' cpuset='2-3'/>
...
This is a regression since a39f69d2b.
When the synchronous pivot option is selected, libvirt would not update
the backing chain until the job was exitted. Some applications then
received invalid data as their job serialized first.
This patch removes polling to wait for the ABORT/PIVOT job completion
and replaces it with a condition. If a synchronous operation is
requested the update of the XML is executed in the job of the caller of
the synchronous request. Otherwise the monitor event callback uses a
separate worker to update the backing chain with a new job.
This is a regression since 1a92c71910
When the ABORT job is finished synchronously you get the following call
stack:
#0 qemuBlockJobEventProcess
#1 qemuDomainBlockJobImpl
#2 qemuDomainBlockJobAbort
#3 virDomainBlockJobAbort
While previously or while using the _ASYNC flag you'd get:
#0 qemuBlockJobEventProcess
#1 processBlockJobEvent
#2 qemuProcessEventHandler
#3 virThreadPoolWorker
Later on I'll be adding a condition that will allow to synchronise a
SYNC block job abort. The approach will require this code to be called
from two different places so it has to be extracted into a helper.
Commit 1a92c719 moved code to handle block job events to a different
function that is executed in a separate thread. The caller of
processBlockJob handles locking and unlocking of @vm, so the we should
not do it in the function itself.
The block copy API takes the speed in bytes/s rather than MiB/s that was
the prior approach in virDomainBlockRebase. We correctly converted the
speed to bytes/s in the old API but we still called the common helper
virDomainBlockCopyCommon with the unadjusted variable.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1207122
When getting info on NUMA parameters for domain,
virCgroupGetCpusetMems() may be called. However, as of 43b67f2e
the call is guarded by check if memory controller is present.
Even though it may be not obvious instantly, NUMA parameters are
stored under cpuset controller. Therefore the check needs to look
like this:
if (!virCgroupHasController(priv->cgroup,
VIR_CGROUP_CONTROLLER_CPUSET) ||
virCgroupGetCpusetMems(priv->cgroup, &nodeset) < 0) {
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Throughout our code, the virCgroupController enum is used in two ways.
First as an index to an array of cgroup controllers:
struct virCgroup {
char *path;
struct virCgroupController controllers[VIR_CGROUP_CONTROLLER_LAST];
};
Second way is that when calling virCgroupNew() a bitmask of the enum
items can be passed to selectively detect only some controllers. For
instance:
int
virCgroupNewVcpu(virCgroupPtr domain,
int vcpuid,
bool create,
virCgroupPtr *group)
{
...
controllers = ((1 << VIR_CGROUP_CONTROLLER_CPU) |
(1 << VIR_CGROUP_CONTROLLER_CPUACCT) |
(1 << VIR_CGROUP_CONTROLLER_CPUSET));
if (virCgroupNew(-1, name, domain, controllers, group) < 0)
goto cleanup;
}
Even though it's highly unlikely that so many new controllers will be
invented so that we would overflow when constructing the bitmask, it
doesn't hurt to check at compile time either.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When creating new internal representation of cgroups, all passed
arguments are logged. Well, except for two: pid and pointer for
return value. Lets log them too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The function has no argument named @name rather than @path
instead. The comment is, however, referring to @name while it
should have been referring to @path really.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit id '2dbfa716' exposed virCgroupDetectMountsFromFile, but did not
add the corresponding entry in the "#else /* !VIR_CGROUP_SUPPORTED */"
section of the module.
Commit id 'ba1dfc5' added virCgroupSetCpusetMemoryMigrate and
virCgroupGetCpusetMemoryMigrate, but did not add the corresponding
entry points into the "#else /* !VIR_CGROUP_SUPPORTED */" section
Commint 0473b45cc introduced new function virNetlinkDelLink, but in
it's counterpart for non-linux platform there should be ATTRIBUTE_UNUSED
instead of ATTRIBUTE_UNSUPPORTED.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Blockcopy to non-file destination is not supported according the code,
but a 'goto endjob' is missed after checking the destination.
This leads to calling drive-mirror with wrong parameters.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1206406
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Current libvirt can only handle up to 1023 bytes when it
reads Linux sysfs topology/thread_siblings. This isn't enough for
Linux distributions that support a large value. This patch fixes
the problem by using VIR_ALLOC()/VIR_FREE(), instead of using a
fixed-size (1024) local char array. In the meanwhile
SYSFS_THREAD_SIBLINGS_LIST_LENGTH_MAX is increased to 8192 which
should be large enough for a foreseeable future.
Signed-off-by: Wei Huang <wei@redhat.com>
Just as it is possible to delete a bridge device with the netlink
RTM_DELLINK message, one can be created with the RTM_NEWLINK
message. Because of differences in the format of the message, it's not
as straightforward as with virNetlinkDelLink() to create a single
utility function that can be used to create any type of interface, so
the new netlink version of virNetDevBridgeCreate() does its own
construction of the netlink message and calls virNetlinkCommand()
itself.
This doesn't provide any extra functionality, just provides symmetry
with the previous commit.
NB: We *could* alter the API of virNetDevBridgeCreate() to take a MAC
address, and directly program that mac address into the bridge (by
adding an IFLA_ADDRESS attribute, as is done in
virNetDevMacVLanCreate()) rather than separately creating the "dummy
tap" (e.g. virbr0-nic) to maintain a fixed mac address on the bridge,
but the commit history of virnetdevbridge.c shows that the presence of
this dummy tap is essential in some older versions of the kernel
(between 2.6.39 and 3.1 or 3.2, possibly?) to proper operation of IPv6
DAD, and I don't want to take the chance of breaking something that I
don't have the time/setup to test (my RHEL6 box is at kernel
2.6.32-544, and the next lowest kernel I have is 3.17)
https://bugzilla.redhat.com/show_bug.cgi?id=1125755
reported that a stray bridge device was left on the system when a
libvirt network failed to start due to an illegal iptables rule caused
by bad config. Apparently the reason this was happening was that
NetworkManager was noticing immediately when the bridge device was
created and automatically setting it IFF_UP. libvirt would then try to
setup the iptables rules, get an error back, and since libvirt had
never IFF_UPed the bridge, it didn't expect that it needed to set it
~IFF_UP before deleting it during the cleanup process. But the
ioctl(SIOCBRDELBR) ioctl will fail to delete a bridge if it is IFF_UP.
Since that bug was reported, NetworkManager has gotten a bit more
polite in this respect, but just in case something similar happens in
the future, this patch switches to using the netlink RTM_DELLINK
message to delete the bridge - unlike SIOCBRDELBR, it will delete the
requested bridge no matter what the setting of IFF_UP.
These two functions are identical, so no sense in having the
duplication. I resisted the temptation to replace calls to
virNetDevMacVLanDelete() with calls to virNetlinkDelLink() just in
case some mythical future platform has macvtap devices that aren't
managed with netlink (or in case we some day need to do more than just
tell the kernel to delete the device).
libvirt has always used the netlink RTM_DELLINK message to delete
macvtap/macvlan devices, but it can actually be used to delete other
types of network devices, such as bonds and bridges. This patch makes
virNetDevMacVLanDelete() available as a generic function so it can
intelligibly be called to delete these other types of interfaces.
Starting a qemu VM with a memory module that has the base address
specified results in the following error:
error: internal error: early end of file from monitor: possible problem:
2015-03-26T03:45:52.338891Z qemu-kvm: -device pc-dimm,node=0,memdev=memdimm0,
id=dimm0,slot=0,base=4294967296: Property '.base' not found
The correct property name for the base address is 'addr'.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Because of the microcode update to Haswell/Broadwell CPUs, existing
domains using these CPUs may fail to start even though they used to run
just fine. To help users solve this issue we try to suggest switching to
-noTSX variant of the CPU model:
virsh # start cd
error: Failed to start domain cd
error: unsupported configuration: guest and host CPU are not
compatible: Host CPU does not provide required features: rtm, hle;
try using 'Haswell-noTSX' CPU model
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
QEMU 2.3 adds these new models to cover Haswell and Broadwell CPUs with
updated microcode. Luckily, they also reverted former the machine type
specific changes to existing models. And since these changes were never
released, we don't need to hack around them in libvirt.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Use the virStorageSourceIsEmpty helper to determine whether the drive
source is empty rather than checking for src->path. This will fix start
of VM with empty network cdrom that would not report any error.
The function that formats the string for network drives would return
error code but did not set the error message when called on storage
source with VIR_STORAGE_NET_PROTOCOL_LAST or _NONE.
Report an error in this case if it would ever be called in that way.
In some circumstances where the build tree differs from the source,
libvirt's compile will try to create the symlink for cpu_map.xml before
creating the directory $(abs_builddir)/cpu:
'src/cpu/cpu_map.xml': No such file or directory'
Do not create the symlink, it is no longer needed after
commit e562e82f
Load CPU map from builddir when run uninstalled
Signed-off-by: Amy Fong <amy.fong@windriver.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Recently we've fixed a bug where the status XML could not be parsed as
the parser used absolute path XPath queries. This test enhancement tests
all XML files used in the qemu-xml-2-xml test as a part of a status XML
snippet to see whether they are parsed correctly. The status XML-2-XML is
currently tested in 223 cases with this patch.
The current auto-indentation buffer code applies indentation only on
complete strings. To allow adding a string containing newlines and
having it properly indented this patch adds virBufferAddStr.
While this thread is cleaning up the client and connection objects:
#2 virFileReadAll (path=0x7f28780012b0 "/proc/1319/stat", maxlen=maxlen@entry=1024, buf=buf@entry=0x7f289c60fc40) at util/virfile.c:1287
#3 0x00007f28adbb1539 in virProcessGetStartTime (pid=<optimized out>, timestamp=timestamp@entry=0x7f289c60fc98) at util/virprocess.c:838
#4 0x00007f28adb91981 in virIdentityGetSystem () at util/viridentity.c:151
#5 0x00007f28ae73f17c in remoteClientFreeFunc (data=<optimized out>) at remote.c:1131
#6 0x00007f28adcb7f33 in virNetServerClientDispose (obj=0x7f28aecad180) at rpc/virnetserverclient.c:858
#7 0x00007f28adba8eeb in virObjectUnref (anyobj=<optimized out>) at util/virobject.c:265
#8 0x00007f28ae74ad05 in virNetServerHandleJob (jobOpaque=<optimized out>, opaque=0x7f28aec93ff0) at rpc/virnetserver.c:205
#9 0x00007f28adbbef4e in virThreadPoolWorker (opaque=opaque@entry=0x7f28aec88030) at util/virthreadpool.c:145
In stack frame #6 the client->identity object got unref'd, but the code
that removes the event callbacks in frame #5 did not run yet as we are
trying to obtain the system identity (frames #4, #3, #2).
In other thead:
#0 virObjectUnref (anyobj=anyobj@entry=0x7f288c162c60) at util/virobject.c:264
klass = 0xdeadbeef
obj = 0x7f288c162c60
#1 0x00007f28ae71c709 in remoteRelayDomainEventCheckACL (client=<optimized out>, conn=<optimized out>, dom=dom@entry=0x7f28aecaafc0) at remote.c:164
#2 0x00007f28ae71fc83 in remoteRelayDomainEventTrayChange (conn=<optimized out>, dom=0x7f28aecaafc0, ... ) at remote.c:717
#3 0x00007f28adc04e53 in virDomainEventDispatchDefaultFunc (conn=0x7f287c0009a0, event=0x7f28aecab1a0, ...) at conf/domain_event.c:1455
#4 0x00007f28adc03831 in virObjectEventStateDispatchCallbacks (callbacks=<optimized out>, ....) at conf/object_event.c:724
#5 virObjectEventStateQueueDispatch (callbacks=0x7f288c083730, queue=0x7fff51f90030, state=0x7f288c18da20) at conf/object_event.c:738
#6 virObjectEventStateFlush (state=0x7f288c18da20) at conf/object_event.c:816
#7 virObjectEventTimer (timer=<optimized out>, opaque=0x7f288c18da20) at conf/object_event.c:562
#8 0x00007f28adb859cd in virEventPollDispatchTimeouts () at util/vireventpoll.c:459
Frame #0 is unrefing an invalid identity object while frame #2 hints
that the client is still dispatching the event.
For untrimmed backtrace see the bugzilla attachment.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1203030
Don't unref the old identity unless we set the new one correctly and
unref the new one on failure to set it so that we don't leak any
references or use invalid pointers.
While adding tests for status XML parsing and formatting I've noticed
that the device alias list is leaked.
==763001== 81 (48 direct, 33 indirect) bytes in 1 blocks are definitely lost in loss record 414 of 514
==763001== at 0x4C2B8F0: calloc (vg_replace_malloc.c:623)
==763001== by 0x6ACF70F: virAllocN (viralloc.c:191)
==763001== by 0x447B64: qemuDomainObjPrivateXMLParse (qemu_domain.c:727)
==763001== by 0x6B848F9: virDomainObjParseXML (domain_conf.c:15491)
==763001== by 0x6B84CAC: virDomainObjParseNode (domain_conf.c:15608)
When starting a VM with hotpluggable memory devices the user may specify
an invalid source NUMA node. Libvirt would pass through the error from
qemu:
# virsh start test3
error: Failed to start domain test3
error: internal error: process exited while connecting to monitor:
2015-03-25T01:12:17.205913Z qemu-kvm: -object memory-backend-ram,id=memdimm0
,size=536870912,host-nodes=1-3,policy=bind: cannot bind memory to host NUMA nodes:
Invalid argument
This patch adds a check that allows to report better error:
# virsh start test3
error: Failed to start domain test3
error: configuration unsupported: NUMA node 1 is unavailable
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Commit 95695388 introduced new util/virthreadjob.c/h files but the
makefile has type that breaks rpm build.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This is very helpful when we want to log and report why we could not
acquire a state change lock. Reporting what job keeps it locked helps
with understanding the issue. Moreover, after calling
virDomainGetControlInfo, it's possible to tell whether libvirt is just
stuck somewhere within the API (or it just forgot to cleanup the job) or
whether libvirt is waiting for QEMU to reply.
The error message will look like the following:
# virsh resume cd
error: Failed to resume domain cd
error: Timed out during operation: cannot acquire state change lock
(held by remoteDispatchDomainSuspend)
https://bugzilla.redhat.com/show_bug.cgi?id=853839
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Every thread created as a worker thread within a pool gets a name
according to virThreadPoolJobFunc name.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Automatically assign a job to every thread created by virThreadCreate.
The name of the virThreadFunc function passed to virThreadCreate is used
as the job or worker name in case no name is explicitly passed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We want all threads to be set as workers or to have a job assigned to
them, which can easily be achieved in virThreadCreate wrapper to
pthread_create. Let's make sure we always use the wrapper.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Each thread can use a thread local variable to keep the name of a job
which is currently running in the job.
The virThreadJobSetWorker API is supposed to be called once by any
thread which is used as a worker, i.e., it is waiting in a pool, woken
up to do a job, and returned back to the pool.
The virThreadJobSet/virThreadJobClear APIs are to be called at the
beginning/end of each job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Although needed in the Xen 4.1 libxl days, there is no longer any
benefit to having per-domain libxl_ctx. On the contrary, their use
makes the code unecessarily complicated and prone to deadlocks under
load. As suggested by the libxl maintainers, use a single libxl_ctx
as a handle to libxl instead of per-domain ctx's.
One downside to using a single libxl_ctx is there are no longer
per-domain log files for log messages emitted by libxl. Messages
for all domains will be sent to /var/log/libvirt/libxl/libxl-driver.log.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
libxlDomainFreeMem() is only used in libxl_domain.c and thus should
be declared static. While at it, change the signature to take a
libxl_ctx instead of libxlDomainObjPrivatePtr, since only the
libxl_ctx is needed.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This function now only enables domain death events. Simply call
libxl_evenable_domain_death() instead of an unnecessary wrapper.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Informing libxl how to handle its child proceses should be done once
during driver initialization, not once for each domain-specific
libxl_ctx object. The related libxl documentation in
$xen-src/tools/libxl/libxl_event.h even mentions that "it is best to
call this at initialisation".
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Long ago I incorrectly associated libxl fd and timer registrations
with per-domain libxl_ctx objects. When creating a libxlDomainObjPrivate,
a libxl_ctx is allocated, and libxl_osevent_register_hooks is called
passing a pointer to the libxlDomainObjPrivate. When an fd or timer
registration occurred, the registration callback received the
libxlDomainObjPrivate, containing the per-domain libxl_ctx. This
libxl_ctx was then used when informing libxl about fd events or
timer expirations.
The problem with this approach is that fd and timer registrations do not
share the same lifespan as libxlDomainObjPrivate, and hence the per-domain
libxl_ctx ojects. The result is races between per-domain libxl_ctx's being
destoryed and events firing on associated fds/timers, typically manifesting
as an assert in libxl
libxl_internal.h:2788: libxl__ctx_unlock: Assertion `!r' failed
There is no need to associate libxlDomainObjPrivate objects with libxl's
desire to use libvirt's event loop. Instead, the driver-wide libxl_ctx can
be used for the fd and timer registrations.
This patch moves the fd and timer handling code away from the
domain-specific code in libxl_domain.c into libxl_driver.c. While at it,
function names were changed a bit to better describe their purpose.
The unnecessary locking was also removed since the code simply provides a
wrapper over the event loop interface. Indeed the locks may have been
causing some deadlocks when repeatedly creating/destroying muliple domains.
There have also been rumors about such deadlocks during parallel OpenStack
Tempest runs.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
We don't have to modify cpuset.mems on hosts without NUMA. It also
fixes an error message that you get instead of success if you trying
update vcpus of a guest on a host without NUMA.
error: internal error: NUMA isn't available on this host
Signer-off-by: Pavel Hrdina <phrdina@redhat.com>
We should call virDomainLiveConfigHelperMethod ASAP because this
function transfers VIR_DOMAIN_AFFECT_CURRENT to VIR_DOMAIN_AFFECT_LIVE
or VIR_DOMAIN_AFFECT_CONFIG. All other additional checks for those two
flags should consider that the user give us VIR_DOMAIN_AFFECT_CURRENT.
Remove the unnecessary check whether the domain is live in case of
VIR_DOMAIN_VCPU_GUEST because this check is done by
virDomainLiveConfigHelperMethod.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
by rewriting it completely from:
error: unsupported configuration: virtio only support device address
type 'PCI'
to:
error: unsupported configuration: virtio disk cannot have an address of type
drive
Since we now support CCW addresses as well.
While debugging the support for responding to qemu RX_FILTER_CHANGED
events, I had changed the "ignoring this event" log message from
VIR_DEBUG to VIR_WARN, but forgot to change it back before
pushing. Since many guest OSes make enough changes to multicast lists
and/or promiscuous mode settings to trigger this message, it's
starting to show up as a red herring in bug reports.
Commit 5bba61f changed the XPath strings to be absolute when parsing
the VM NUMA configuration. Unfortunately the <domain> element is not a
top level element when parsing the domain status XML thus the absolute
XPath string doesn't match.
Use the relative string so that the <numa> settings are not lost.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Add a few helpers that allow to operate with memory device definitions
on the domain config and use them to implement memory device coldplug in
the qemu driver.
Add support to start qemu instance with 'pc-dimm' device. Thanks to the
refactors we are able to reuse the existing function to determine the
parameters.
Make sure that libvirt has all vital information needed to reliably
represent configuration of guest's memory devices in case of a
migration.
This patch forbids migration in case the required slot number and module
base address are not present (failed to be loaded from qemu via
monitor).
When using 'dimm' memory devices with qemu, some of the information
like the slot number and base address need to be reloaded from qemu
after process start so that it reflects the actual state. The state then
allows to use memory devices across migrations.
This patch adds code that parses and formats configuration for memory
devices.
A simple configuration would be:
<memory model='dimm'>
<target>
<size unit='KiB'>524287</size>
<node>0</node>
</target>
</memory>
A complete configuration of a memory device:
<memory model='dimm'>
<source>
<pagesize unit='KiB'>4096</pagesize>
<nodemask>1-3</nodemask>
</source>
<target>
<size unit='KiB'>524287</size>
<node>1</node>
</target>
</memory>
This patch preemptively forbids use of the <memory> device in individual
drivers so the users are warned right away that the device is not
supported.
To enable memory hotplug the maximum memory size and slot count need to
be specified. As qemu supports now other units than mebibytes when
specifying memory, use the new interface in this case.
Add a XML element that will allow to specify maximum supportable memory
and the count of memory slots to use with memory hotplug.
To avoid possible confusion and misuse of the new element this patch
also explicitly forbids the use of the maxMemory setting in individual
drivers's post parse callbacks. This limitation will be lifted when the
support is implemented.
With the current control flow the post parse callback returned success
right away for fully virtualized VMs. To allow adding additional checks
into the post parse callback tweak the conditions so that the function
doesn't return early except for error cases.
To clarify the original piece of code borrow the wording from the commit
message for the patch that introduced the code.
In the last section if the function determines that the config is
invalid when QEMU doesn't support the memory device the JSON config
object would be returned even if it doesn't make sense.
Assign the object to be returned only on success.
When no model is specified in the domain definition for
a scsi controller and the architectur is s390 than virtio-scsi
is set as default model.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Always add udev linker flags when WITH_UDEV is enabled to avoid
underlinking.
See commit 43dbcb15 (interface: always build all available backends)
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Commit cf54c60699 introduced the ability
to create missing storage volumes during migration. For network disks,
however, we may not necessarily be able to detect whether they already
exist -- there is no straight-forward way to map the disk to a storage
volume, and even if there were it's possible no configured storage pool
actually contains the disk.
It is better to assume the network disk exists in this case, rather than
aborting the migration completely. If the volume really is missing, QEMU
will generate an appropriate error later in the migration.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
This function does not make any sense now, that network driver is
(almost) dropped. I mean, previously, when threads were
serialized, this function was there to check, if no other network
with the same name or UUID exists. However, nowadays that threads
can run more in parallel, this function is useless, in fact it
gives misleading return values. Consider the following scenario.
Two threads, both trying to define networks with same name but
different UUID (e.g. because it was generated during XML parsing
phase, whatever). Lets assume that both threads are about to call
networkValidate() which immediately calls
virNetworkObjIsDuplicate().
T1: calls virNetworkObjIsDuplicate() and since no network with
given name or UUID exist, success is returned.
T2: calls virNetworkObjIsDuplicate() and since no network with
given name or UUID exist, success is returned.
T1: calls virNetworkAssignDef() and successfully places its
network into the virNetworkObjList.
T2: calls virNetworkAssignDef() and since network with the same
name exists, the network definition is replaced.
Okay, this is mainly because virNetworkAssignDef() does not check
whether name and UUID matches. Well, lets make it so! And drop
useless function too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's no need to lock the network driver, as network driver
initialization is done prior accepting any client. There's nobody
to hop in and do something over partially initialized driver. Nor
qemu driver is doing that.
==30532== Observed (incorrect) order is: acquisition of lock at 0x1439EF50
==30532== at 0x4C31A26: pthread_mutex_lock (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==30532== by 0x5324895: virMutexLock (virthread.c:88)
==30532== by 0x5307E86: virObjectLock (virobject.c:323)
==30532== by 0x5396440: virNetworkObjListForEach (network_conf.c:4511)
==30532== by 0x19B29308: networkStateInitialize (bridge_driver.c:686)
==30532== by 0x53E1CCC: virStateInitialize (libvirt.c:777)
==30532== by 0x11DEB7: daemonRunStateInit (libvirtd.c:906)
==30532== by 0x5324B6A: virThreadHelper (virthread.c:197)
==30532== by 0x4C30456: ??? (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==30532== by 0xA1EC1F2: start_thread (in /lib64/libpthread-2.19.so)
==30532== by 0xA4EDC8C: clone (in /lib64/libc-2.19.so)
==30532==
==30532== followed by a later acquisition of lock at 0x1439CD60
==30532== at 0x4C31A26: pthread_mutex_lock (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==30532== by 0x5324895: virMutexLock (virthread.c:88)
==30532== by 0x19B27B2C: networkDriverLock (bridge_driver.c:102)
==30532== by 0x19B27B60: networkGetDnsmasqCaps (bridge_driver.c:113)
==30532== by 0x19B2856A: networkUpdateState (bridge_driver.c:389)
==30532== by 0x53963E9: virNetworkObjListForEachHelper (network_conf.c:4488)
==30532== by 0x52E2224: virHashForEach (virhash.c:521)
==30532== by 0x539645B: virNetworkObjListForEach (network_conf.c:4512)
==30532== by 0x19B29308: networkStateInitialize (bridge_driver.c:686)
==30532== by 0x53E1CCC: virStateInitialize (libvirt.c:777)
==30532== by 0x11DEB7: daemonRunStateInit (libvirtd.c:906)
==30532== by 0x5324B6A: virThreadHelper (virthread.c:197)
==30532==
==30532== Required order was established by acquisition of lock at 0x1439CD60
==30532== at 0x4C31A26: pthread_mutex_lock (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==30532== by 0x5324895: virMutexLock (virthread.c:88)
==30532== by 0x19B27B2C: networkDriverLock (bridge_driver.c:102)
==30532== by 0x19B28DF9: networkStateInitialize (bridge_driver.c:609)
==30532== by 0x53E1CCC: virStateInitialize (libvirt.c:777)
==30532== by 0x11DEB7: daemonRunStateInit (libvirtd.c:906)
==30532== by 0x5324B6A: virThreadHelper (virthread.c:197)
==30532== by 0x4C30456: ??? (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==30532== by 0xA1EC1F2: start_thread (in /lib64/libpthread-2.19.so)
==30532== by 0xA4EDC8C: clone (in /lib64/libc-2.19.so)
==30532==
==30532== followed by a later acquisition of lock at 0x1439EF50
==30532== at 0x4C31A26: pthread_mutex_lock (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==30532== by 0x5324895: virMutexLock (virthread.c:88)
==30532== by 0x5307E86: virObjectLock (virobject.c:323)
==30532== by 0x538A09C: virNetworkAssignDef (network_conf.c:527)
==30532== by 0x5391EB2: virNetworkLoadState (network_conf.c:3008)
==30532== by 0x53922D4: virNetworkLoadAllState (network_conf.c:3128)
==30532== by 0x19B2929A: networkStateInitialize (bridge_driver.c:671)
==30532== by 0x53E1CCC: virStateInitialize (libvirt.c:777)
==30532== by 0x11DEB7: daemonRunStateInit (libvirtd.c:906)
==30532== by 0x5324B6A: virThreadHelper (virthread.c:197)
==30532== by 0x4C30456: ??? (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==30532== by 0xA1EC1F2: start_thread (in /lib64/libpthread-2.19.so)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Wikipedia's list of common misspellings [1] has a machine-readable
version. This patch fixes those misspellings mentioned in the list
which don't have multiple right variants (as e.g. "accension", which can
be both "accession" and "ascension"), such misspellings are left
untouched. The list of changes was manually re-checked for false
positives.
[1] https://en.wikipedia.org/wiki/Wikipedia:Lists_of_common_misspellings/For_machines
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We've never set the cpuset.memory_migrate value to anything, keeping it
on default. However, we allow changing cpuset.mems on live domain.
That setting, however, don't have any consequence on a domain unless
it's going to allocate new memory.
I managed to make 'virsh numatune' move all the memory to any node I
wanted even without disabling libnuma's numa_set_membind(), so this
should be safe to use with it as well.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1198497
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
xen.git commit babeca32 added a pkgconfig file for libxenlight,
allowing libxl apps to determine the location of Xen binaries
such as firmware blobs, device emulator, etc.
This patch adds support for xenlight.pc in the libxl driver, falling
back to the previous configure logic if not found. It introduces
LIBXL_FIRMWARE_DIR and LIBXL_EXECBIN_DIR to define the firmware and
libexec_bin locations. If xenlight.pc does not exist, the defines
are set to the current hardcoded paths. The capabilities'
<emulator> and <loader> elements are updated to use the paths.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
If, by any reason, parallelsNetworkOpen fails it dereferences
newly allocated privconn->networks via virObjectUnref, which in
turn deallocates its memory.
Subsequent call of parallelsNetworkClose calls virObjectUnref
that leads to double memory free. To prevent this we should zero
privconn->networks to make all subsequent virObjectUnref be safe.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1196934
When qemu exits during startup, libvirt includes the error from
/var/log/libvirt/qemu/vm.log in the error message:
$ virsh start test3
error: Failed to start domain test3
error: internal error: early end of file from monitor: possible problem:
2015-02-27T03:03:16.985494Z qemu-kvm: -numa memdev is not supported by
machine rhel6.5.0
The check for domain liveness added to qemuDomainObjExitMonitor
in commit dc2fd51f sometimes overwrites this error:
$ virsh start test3
error: Failed to start domain test3
error: operation failed: domain is no longer running
Fix the check to only report an error if there is none set.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When converting domXML from native, the libxl driver was overwriting
useful errors from the xenconfig parsing code with a useless, generic
error. E.g. "internal error: parsing xm config failed" vs
"internal error: config value usbdevice was malformed". Remove the
redundant (and useless) error reporting in the libxl driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Issue #1 - A call to virBitmapNew did not check if the allocation
failed which could lead to a NULL dereference
Issue #2 - When deleting the pin entries from the config file, the
code loops from the number of elements down to the "new" vcpu count;
however, the pin id values are numbered 0..n-1 not 1..n, so the "first"
pin attempt would never work. Luckily the check was for whether the
incoming 'n' (vcpu id) matched the entry in the array from 0..arraysize
rather than a dereference of the 'n' entry
In qemu 2.3, the migration status will include 'cancelling' in the
window between when an asynchronous cancel has been requested and
when the migration is actually halted. Previously, qemu hid this
state and reported 'active'. Libvirt manages the sequence okay
even when the string is unrecognized (that is, it will report an
unknown state:
Migration: [ 69 %]^Cerror: internal error: unexpected migration status in cancelling.
but the migration is still cancelled), but recognizing the string
makes for a smoother user experience.
* src/qemu/qemu_monitor.h
(QEMU_MONITOR_MIGRATION_STATUS_CANCELLING): Add enum.
* src/qemu/qemu_monitor.c (qemuMonitorMigrationStatus): Map it.
* src/qemu/qemu_migration.c (qemuMigrationUpdateJobStatus): Adjust
clients.
* src/qemu/qemu_monitor_json.c
(qemuMonitorJSONGetMigrationStatusReply): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Investigation of a problem with creating passthrough macvtap devices
(https://bugzilla.redhat.com/show_bug.cgi?id=1185501) has shown that
this slightly more verbose failure message is useful. In particular,
the mac address can be used to determine the domain. You could also
figure this out by looking at preceding messages in a debug log, but
this gets it in a single place.
virnetdevopenvswitch.h declares a few functions that can be called to
add ports to and remove them from OVS bridges, and retrieve the
migration data for a port. It does not contain any data definitions
that are used by domain_conf.h. But for some reason, domain_conf.h
virnetdevopenvswitch.h should be directly #including it. This adds a
few lines to the project, but saves all the files that don't need it
from the extra computing, and makes the dependencies more clear cut.
Problem Description:
When we set boot order for a vhost-user network interface, we found the boot index
doesn't work.
Cause of the Problem:
In the function qemuBuildVhostuserCommandLine(), it forcely set the arg bootindex of
function qemuBuildNicDevStr() to 0. Thus, the bootindex parameter got missing.
Solution:
Trans the arg bootindex down.
Signed-off-by: Gao Haifeng <gaohaifeng.gao@huawei.com>
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
which is on by default when a new VM/CT is created.
We should do this because this feature can't be controlled
by libvirt now and it sets up some iptables rules. So it's
better to do this to avoid potential conflict of different
set of rules or to avoid unexpected behavior.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
In order to support 'bridge' network adapters in parallels
driver we need to plug our veth devices into corresponding
linux bridges.
We are going to do this by reusing our abstraction of
Virtual Networks in terms of PCS. On a domain creation, we
create a new Virtual Network naming it with the same name
as a source bridge for each network interface.
Having done this, we plug PCS veth interfaces created with names of
target dev into specified bridges using our standard PCS procedures
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Don't fail initialization of parallels driver if
parallelsLoadNetwork fails for optional networks.
This can happen when some of them are added manually
and configured incompletely. PCS requires only two networks
created automatically (named Host-Only and Bridged), others
are optional and their incompleteness can be ignored.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The following is a long winded way to say this patch is avoiding a
false positive.
Coverity complains that calling networkPlugBandwidth() could eventually
end up with a NULL dereference on iface->bandwidth because in the
networkAllocateActualDevice there's a check of 'iface->bandwidth'
before deciding to try to use the 'portgroup' if it exists or to not
perferm the virNetDevBandwidthCopy if 'bandwidth' is not NULL.
Later in networkPlugBandwidth the 'iface->bandwidth' is sourced from
virDomainNetGetActualBandwidth - which would be either iface->bandwidth
or (preferably) iface->data.network.actual->bandwidth which would have
been filled in from either 'iface->bandwidth' or 'portgroup->bandwidth'
back in networkAllocateActualDevice
There *is* a check in networkCheckBandwidth for the result of the
virDomainNetGetActualBandwidth being NULL and a return 1 based on
that which would cause networkPlugBandwidth to exit properly and thus
never hit the condition that Coverity complains about.
However, since Coverity checks all paths - it somehow believes that
a return of 0 by networkCheckBandwidth in this condition would end
up causing the possible NULL dereference. The "fix" to silence Coverity
is to not have networkCheckBandwidth also call virDomainNetGetActualBandwidth
in order to get the ifaceBand, but rather have it accept it as an argument
which causes Coverity to "see" that it's the exit condition of 1 that won't
have the possible NULL dereference. Since we're passing that, I added the
passing of iface->mac rather than passing iface as well. This just hopefully
makes sure someone doesn't undo this in the future...
When libvirt is starting a domain, it reports the state as SHUTOFF until
it's RUNNING. This is not ideal because domain startup may take a long
time (usually because of some configuration issues, firewalls blocking
access to network disks, etc.) and domain lists provided by libvirt look
awkward. One can see weird shutoff domains with IDs in a list of active
domains or even shutoff transient domains. In any case, it looks more
like a bug in libvirt than a normal state a domain goes through.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The function needs a pointer to the network to get list of DHCP
leases. The pointer is obtained via virNetworkLookupByName() which
requires callers to free the returned network once no longer needed.
Otherwise it's leaked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we allow HW address to be not present on our RPC layer,
don't error out if qemu-ga hasn't provided any.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Not all NICs (esp. the virtual ones like TUN) must have a hardware
address. Teach our RPC that it's possible.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1199182 documents that
after a series of disk snapshots into existing destination images,
followed by active commits of the top image, it is possible for
qemu 2.2 and earlier to end up tracking a different name for the
image than what it would have had when opening the chain afresh.
That is, when starting with the chain 'a <- b <- c', the name
associated with 'b' is how it was spelled in the metadata of 'c',
but when starting with 'a', taking two snapshots into 'a <- b <- c',
then committing 'c' back into 'b', the name associated with 'b' is
now the name used when taking the first snapshot.
Sadly, older qemu doesn't know how to treat different spellings of
the same filename as identical files (it uses strcmp() instead of
checking for the same inode), which means libvirt's attempt to
commit an image using solely the names learned from qcow2 metadata
fails with a cryptic:
error: internal error: unable to execute QEMU command 'block-commit': Top image file /tmp/images/c/../b/b not found
even though the file exists. Trying to teach libvirt the rules on
which name qemu will expect is not worth the effort (besides, we'd
have to remember it across libvirtd restarts, and track whether a
file was opened via metadata or via snapshot creation for a given
qemu process); it is easier to just always directly ask qemu what
string it expects to see in the first place.
As a safety valve, we validate that any name returned by qemu
still maps to the same local file as we have tracked it, so that
a compromised qemu cannot accidentally cause us to act on an
incorrect file.
* src/qemu/qemu_monitor.h (qemuMonitorDiskNameLookup): New
prototype.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDiskNameLookup):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorDiskNameLookup): New function.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDiskNameLookup)
(qemuMonitorJSONDiskNameLookupOne): Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit)
(qemuDomainBlockJobImpl): Use it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Use the utilities introduced in the previous patches so the qemu
driver is able to create tap devices that are bound (and unbound
on domain destroyal) to Midonet virtual ports.
Signed-off-by: Antoni Segura Puimedon <toni+libvirt@midokura.com>
Midonet is an opensource virtual networking that over lays the IP
network between hypervisors. Currently, such networks can be made
with the openvswitch virtualport type.
This patch, defines the schema and documentation that will serve
as basis for the follow up patches that will add support to libvirt
for using Midonet virtual ports for its interfaces. The schema
definition requires that the port profile expresses its interfaceid
as part of the port profile. For that reason, this is part of the
patch too.
Signed-off-by: Antoni Segura Puimedon <toni+libvirt@midokura.com>
Adds the port type definitions and methods that will be used to bind
interfaces to the Midonet virtual ports.
virtnetdevmidonet.c adds the way to bind and unbind the ports by
calling into the Midonet Host Agent control command line (installed
with the midolman package).
Signed-off-by: Antoni Segura Puimedon <toni+libvirt@midokura.com>
Previously we had to check for 3 fields to see if the source was filled.
Repurpose one of the variables as a boolean flag and use it instead of
combining multiple sources.
For the condition that checks that only CDROM/FLOPPY drives can be empty
we can use the virStorageSourceIsEmpty() helper.
If the storage device type is parsed as network our parser still allows
it to omit the <source> element. The empty drive check would not trigger
on such device as it expects that every network storage source is valid.
Use VIR_STORAGE_NET_PROTOCOL_NONE as a marker that the storage source is
empty.
Only selected fields from the disk source were copied when cold updating
source in a CDROM drive. When such drive was backed by a network file
this resulted into corruption of the definition:
<disk type='network' device='cdrom'>
<driver name='qemu' type='raw' cache='none'/>
<source protocol='gluster' name='gluster-vol1(null)'>
<host name='localhost'/>
</source>
<target dev='vdc' bus='virtio'/>
<readonly/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</disk>
Update the whole source instead of cherry-picking elements.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1166024
By querying the qemu guest agent with the QMP command
"guest-network-get-interfaces" and converting the received JSON
output to structured objects.
Although "ifconfig" is deprecated, IP aliases created by "ifconfig"
are supported by this API. The legacy syntax of an IP alias is:
"<ifname>:<alias-name>". Since we want all aliases to be clubbed
under parent interface, simply stripping ":<alias-name>" suffices.
Note that IP aliases formed by "ip" aren't visible to "ifconfig",
and aliases created by "ip" do not have any specific name. But
we are lucky, as qemu guest agent detects aliases created by both.
src/qemu/qemu_agent.h:
* Define qemuAgentGetInterfaces
src/qemu/qemu_agent.c:
* Implement qemuAgentGetInterface
src/qemu/qemu_driver.c:
* New function qemuGetDHCPInterfaces
* New function qemuDomainInterfaceAddresses
src/remote_protocol-sructs:
* Define new structs
tests/qemuagenttest.c:
* Add new test: testQemuAgentGetInterfaces
Test cases for IP aliases, 0 or multiple ipv4/ipv6 address(es)
Signed-off-by: Nehal J Wani <nehaljw.kkd1@gmail.com>
daemon/remote.c
* Define remoteSerializeDomainInterface, remoteDispatchDomainInterfaceAddresses
src/remote/remote_driver.c
* Define remoteDomainInterfaceAddresses
src/remote/remote_protocol.x
* New RPC procedure: REMOTE_PROC_DOMAIN_INTERFACE_ADDRESSES
* Define structs remote_domain_ip_addr, remote_domain_interface,
remote_domain_interfaces_addresse_args, remote_domain_interface_addresses_ret
* Introduce upper bounds (to handle DoS attacks):
REMOTE_DOMAIN_INTERFACE_MAX = 2048
REMOTE_DOMAIN_IP_ADDR_MAX = 2048
Restrictions on the maximum number of aliases per interface were
removed after kernel v2.0, and theoretically, at present, there
are no upper limits on number of interfaces per virtual machine
and on the number of IP addresses per interface.
src/remote_protocol-structs
* New structs added
Signed-off-by: Nehal J Wani <nehaljw.kkd1@gmail.com>
Define helper function virDomainInterfaceFree, which allows
the upper layer application to free the domain interface object
conveniently.
The API is going to provide multiple methods by flags, e.g.
* Query guest agent
* Parse DHCP lease file
include/libvirt/libvirt-domain.h
* Define virDomainInterfaceAddresses, virDomainInterfaceFree
* Define structs virDomainInterface, virDomainIPAddress
src/driver-hypervisor.h:
* Define domainInterfaceAddresses
src/libvirt-domain.c:
* Implement virDomainInterfaceAddresses
* Implement virDomainInterfaceFree
src/libvirt_public.syms:
* Export the new symbols
Signed-off-by: Nehal J Wani <nehaljw.kkd1@gmail.com>
Failures of parallelsStorageOpen occured because we incorrectly treated
path to VM' configuration file as a directory. Now initialization of
parallels VM domains home directory is fixed.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
Otherwise exporting existing domain config and defining a new one like this:
virsh -c parallels:///system dumpxml instance01 > my.xml
virsh -c parallels:///system define my.xml
leads to an error because PCS default x64 mode turns to x32.
Thus, we need to set correct cpuMode in prlsdkDoApplyConfig() explicitly.
Signed-off-by: Mikhail Feoktistov <mfeoktistov@parallels.com>
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We're parsing memballoon status period as unsigned int, but when we're
trying to set it, both we and qemu use signed int. That means large
values will get wrapped around to negative one resulting in error.
Basically the same problem as commit e3a7b874 was dealing with when
updating live domain.
QEMU changed the accepted value to int64 in commit 1f9296b5, but even
values as INT_MAX don't make sense since the value passed means seconds.
Hence adding capability flag for this change isn't worth it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140958
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In order not to leave old error messages set, this patch refactors the
code so the error is reported only when acted upon. The only such place
already rewrites any error, so cleaning up all the error reporting in
qemuMonitorSetMemoryStatsPeriod() is enough.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
All the devices we have format their address as its last sub-element, so
let's change memballoon to follow suit. Also adjust RNG to allow any
order of them so 'virsh edit' doesn't shout at us.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit 4ab8cd77 added a check requiring input devices to have
a bus type of VIR_DOMAIN_INPUT_BUS_USB, failing to start the
domain otherwise. But virDomainDefParseXML adds implicit mouse
and keyboard if a graphics device is configured. See calls to
virDomainDefMaybeAddInput.
The regression is fixed by removing the check requiring USB input
devices, and skipping non-USB input devices when populating USB
'usbdevice' in libxl_domain_build_info struct.
Patch 51f9f03a4c introduces a regression
where if a blockCommit operation fails the disk is still marked as being
part of a block job but can't be unmarked later.
As pointed out by jtomko in his review of the IOThreads pinning code:
http://www.redhat.com/archives/libvir-list/2015-March/msg00495.html
there are some comments sprinkled in indicating IOThreads were using
the same structure as the VcpuPin code...
This is the first patch of a few that will change the virDomainVcpuPin*
structures and code to just virDomainPin* - starting with the data
structure naming...
During his review of the iothreads pin setting code, Pavel noted that
there was a potential memory leak with respect to how the newVcpuPin
is handled and the goto endjob's in failure paths which would not free
the memory. For reference, See:
http://www.redhat.com/archives/libvir-list/2015-March/msg00415.html
Now that the size of guest's memory can be inferred from the NUMA
configuration (if present) make it optional to specify <memory>
explicitly.
To make sure that memory is specified add a check that some form of
memory size was specified. One side effect of this change is that it is
no longer possible to specify 0KiB as memory size for the VM, but I
don't think it would be any useful to do so. (I can imagine embedded
systems without memory, just registers, but that's far from what libvirt
is usually doing).
Forbidding 0 memory for guests also fixes a few corner cases where 0 was
not interpreted correctly and caused failures. (Arguments for numad when
using automatic placement, size of the balloon). This fixes problems
described in https://bugzilla.redhat.com/show_bug.cgi?id=1161461
Test case changes are added to verify that the schema change and code
behave correctly.
Use the NUMA total instead of the configured size both in XML and for
uses in the code once NUMA is enabled for a domain.
One test case change is necessary as the rounding of the individual cell
sizes was not matching the rounding of the total size.
The memory sizes in qemu are aligned up to 1 MiB boundaries. There are
two places where this was done once for the total size and then for
individual NUMA cell sizes.
Add a function that will align the sizes in one place so that it's clear
where the sizes are aligned.
As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.
To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.
The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.
Note that the comments for the functions are future aware and document
state that will be present after a few later patches.
Surprisingly we did not grab a VM job when a block job finished and we'd
happily rewrite the backing chain data. This made it possible to crash
libvirt when queueing two backing chains tightly and other badness.
To fix it, add yet another handler to the helper thread that handles
monitor events that require a job.
We interpret port values as signed int (convert them from char *),
so if a negative value is provided in network disk's configuration,
we accept it as valid, however there's an 'unknown cause' error raised later.
This error is only accidental because we return the port value in the return code.
This patch adds just a minor tweak to the already existing check so we
reject negative values the same way as we reject non-numerical strings.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1163553
Valgrind detected a leak:
==17820== 102 (56 direct, 46 indirect) bytes in 1 blocks are definitely lost in loss record 479 of 646
==17820== at 0x4A08946: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==17820== by 0x508521A: virAllocVar (viralloc.c:560)
==17820== by 0x50D9FCA: virObjectNew (virobject.c:193)
==17820== by 0x50A4FD9: dnsmasqCapsNewEmpty (virdnsmasq.c:784)
==17820== by 0x50A514E: dnsmasqCapsNewFromBinary (virdnsmasq.c:830)
==17820== by 0x1B508287: networkStateInitialize (bridge_driver.c:666)
It looks like commit 172acef introduced the problem, because
networkGetDnsmasqCaps() increments the reference count but an
early exit never does a matching decrement.
* src/network/bridge_driver.c (networkStateCleanup): Plug leak.
Signed-off-by: Eric Blake <eblake@redhat.com>
Valgrind complained:
==3770== Syscall param ioctl(SIOCETHTOOL) points to uninitialised byte(s)
==3770== at 0x919D407: ioctl (syscall-template.S:81)
==3770== by 0x530FE7E: rpl_ioctl (ioctl.c:42)
==3770== by 0x50CB433: virNetDevFeatureAvailable (virnetdev.c:2764)
==3770== by 0x50CB6A7: virNetDevGetFeatures (virnetdev.c:2830)
==3770== by 0x1F0E5347: udevProcessNetworkInterface (node_device_udev.c:722)
==3770== by 0x1F0E689F: udevGetDeviceDetails (node_device_udev.c:1300)
==3770== by 0x1F0E6E06: udevAddOneDevice (node_device_udev.c:1422)
==3770== by 0x1F0E6FB8: udevProcessDeviceListEntry (node_device_udev.c:1464)
==3770== by 0x1F0E70CF: udevEnumerateDevices (node_device_udev.c:1494)
==3770== by 0x1F0E7BB4: nodeStateInitialize (node_device_udev.c:1806)
==3770== by 0x51B4303: virStateInitialize (libvirt.c:777)
==3770== by 0x11DEE7: daemonRunStateInit (libvirtd.c:906)
==3770== Address 0x228e38d4 is on thread 12's stack
==3770== in frame #2, created by virNetDevFeatureAvailable (virnetdev.c:2750)
* src/util/virnetdev.c (virNetDevFeatureAvailable): Initialize all
bytes of ifr.
Signed-off-by: Eric Blake <eblake@redhat.com>
Introduced by f6a2f97e
Problem Description:
After multiple times of migrating a domain, which has an ovs interface with no portData set,
with non-shared disk, nbd ports got overflowed.
The steps to reproduce the problem:
1 define and start a domain with its network configured as:
<interface type='bridge'>
<source bridge='br0'/>
<virtualport type='openvswitch'>
</virtualport>
<model type='virtio'/>
<driver name='vhost' queues='4'/>
</interface>
2 do not set the network's portData.
3 migrate(ToURI2) it with flag 91(1011011), which means:
VIR_MIGRATE_LIVE
VIR_MIGRATE_PEER2PEER
VIR_MIGRATE_PERSIST_DEST
VIR_MIGRATE_UNDEFINE_SOURCE
VIR_MIGRATE_NON_SHARED_DISK
4 migrate success, but we got an error log in libvirtd.log:
error : virCommandWait:2423 : internal error: Child process (ovs-vsctl --timeout=5 get Interface
vnet1 external_ids:PortData) unexpected exit status 1: ovs-vsctl: no key "PortData" in Interface
record "vnet1" column external_ids
5 migrate it back, migrate it , migrate it back, .......
6 nbd port got overflowed.
The reasons for the problem is :
1 virNetDevOpenvswitchGetMigrateData() takes it as wrong if no portData is available for the ovs
interface of a domain. (We think it's not appropriate, as portData is just OPTIONAL)
2 in func qemuMigrationBakeCookie(), it fails in qemuMigrationCookieAddNetwork(), and returns with -1.
qemuMigrationCookieAddNBD() is not called thereafter, and mig->nbd is still NULL.
3 However, qemuMigrationRun() just *WARN* if qemuMigrationBakeCookie() fails, migration still successes.
cookie is NULL, it's not baked on the src side.
4 On the destination side, it would alloc a port first and then free the nbd port in COOKIE.
But the cookie is NULL due to qemuMigrationCookieAddNetwork() failure at src side. thus the nbd port
is not freed.
In this patch, we add "--if-exists" option to make ovs-vsctl not raise error if there's no portData available.
Further more, because portData may be NULL in the cookie at the dest side, check it before setting portData.
Signed-off-by: Zhou Yimin <zhouyimin@huawei.com>
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
It will not be possible to detach such device later. Also improve
logging in such cases.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
virDomainNetFindIdx no longer returns info whether device was not found,
or there was multiple matches. Additionally it already handle error
reporting. Introduce virDomainHasNet which does a simple task, without
implicit error reporting.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
In Xen>=4.3, libxl supports new syntax for USB devices:
usbdevice=[ "DEVICE", "DEVICE", ... ]
Add support for that in xenconfig driver. When only one device is
defined, keep using old syntax for backward compatibility.
Adjust tests for changed options order.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Now that the network driver lock is ash heap of history,
we can use more of networkObjFromNetwork().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While in previous commits there were some places that relied on
the big lock, in this file there's no such place and the big
driver lock can be dropped completely. Yay!
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Well, if 'everywhere' is defined as that part of the driver code
that serves virNetwork* APIs. Again, we lower layers already have
their locks, so there's no point doing big lock.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have fine grained locks, there's no need to
lock the whole driver. We can rely on self-locking APIs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In order to drop network driver lock, lets annotate which
structure items are immutable, which have self-locking
APIs and so on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is not an immutable pointer and can change during lifetime.
Therefore, in order to drop network driver lock, we must use an
internal accessor which does not lock the network driver yet, but
it will soon. Now it merely returns an referenced object.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Well, network driver code has the driver accessible as a global
variable. This makes any rework hard, as it's unclear where the
variable is accessed and/or modified. Lets just pass the driver
as a parameter to all functions where needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
A helper that never returns an error and treats bits out of bitmap range
as false.
Use it everywhere we use ignore_value on virBitmapGetBit, or loop over
the bitmap size.
For VBOX it's most likely that the connection is vbox:///session and it
runs with local non-root account. This caused permission denied when
LOCALSTATEDIR was used to create temp file. This patch makes use of the
virGetUserCacheDirectory to address this problem for non-root users.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit c9027d8f added a detection of NIC HW features, but some of them
are not available in old kernel. Very old kernels lack enum
ethtool_flags and even if this enum is present, not all values are
available for all kernels. To be sure that we have everything in kernel
that we need, we must check for existence of most of that flags, because
only few of them were defined at first.
Also to successfully build libvirt with older kernel we need to include
<linux/types.h> before <linux/ethtool.h> to have __u32 and friends
defined.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Coverity notes in xenapiDomainGetXMLDesc that 'vms' is dereferenced
a few times before a "if (vms) xen_vm_set_free(vms);" call is made.
Since we'd exit out much sooner if the fetch of the vms failed, just
remove the unnecessary "if (vms)" check.
Coverity complains that "net_set" is compared to NULL before calling
xen_network_set_free, but used rather liberally before that. While
I was looking at the code I also noted that if the virAsprintfQuiet
fails, then we leak our structures - so I added those too.
Coverity points out that the return from virDomainDefParseString is
not checked in xenapiDomainCreateXML like it should be which could
end up in a NULL pointer dereference
Since inception. Coverity complains that the code checks "(record ==
NULL && !session->ok)", but doesn't check (record != NULL) before
dereferencing at "record->is_a_template"
https://bugzilla.redhat.com/show_bug.cgi?id=1135491
More or less a virtual copy of the existing virDomainVcpuPin{Add|Del} API's.
NB: The IOThreads implementation "reused" the virDomainVcpuPinDefPtr
since it provided everything necessary - an "id" and a "map" for each
thread id configured.
Add virDomainPinIOThread to allow setting the CPU affinity for a specific
IOThread based on the output generated from virDomainGetIOThreadsInfo
The API supports updating both the --live domain and the --config data
This patch turns both virNetworkObjFindByUUID() and
virNetworkObjFindByName() to return an referenced object so that
even if caller unlocks it, it's for sure that object won't
disappear meanwhile. Especially if the object (in general) is
locked and unlocked during the caller run.
Moreover, this commit is nicely small, since the object unrefing
can be done in virNetworkObjEndAPI().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Every API that touches internal structure of the object must lock
the object first. Not every API that has the object as an
argument needs to do that though. Some APIs just pass the object
to lower layers which, however, must lock the object then. Look
at the code, you'll get my meaning soon.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is going to be needed later, when some functions already
have the virNetworkObjList object already locked and need to
lookup a object to work on. As an example of such function is
virNetworkAssignDef(). The other use case might be in
virNetworkObjListForEach() callback.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Later we can turn APIs to lock the object if needed instead of
relying on caller to mutually exclude itself (probably done by
locking a big lock anyway).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far, this is pure code replacement. But once we introduce
reference counting to virNetworkObj this will be more handy as
there'll be only one function to change: virNetworkObjEndAPI().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far, this is pure code replacement. But once we introduce
reference counting to virNetworkObj this will be more handy as
there'll be only one function to change: virNetworkObjEndAPI().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far, this is pure code replacement. But once we introduce
reference counting to virNetworkObj this will be more handy as
there'll be only one function to change: virNetworkObjEndAPI().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is practically copy of qemuDomObjEndAPI. The reason why is
it so widely available is to avoid code duplication, since the
function is going to be called from our bridge driver, test
driver and parallels driver too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far it's just a structure which happens to have 'Obj' in its
name, but otherwise it not related to virObject at all. No
reference counting, not virObjectLock(), nothing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that qemuDomainBlocksStatsGather provides functions of both
qemuMonitorGetBlockStatsParamsNumber and qemuMonitorGetBlockStatsInfo we
can reuse it and kill a lot of code.
Additionally as a bonus qemuDomainBlockStatsFlags will now support
summary statistics so add a statement to the virsh man page about that.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1142636
In the LXC driver, if the disk path is not provided the API returns
total statistics for all disks of the domain. With the new text monitor
implementation this can be now done in the qemu driver too.
Add code that wil total the stats for all disks if the path is not
provided.
Extract the code to look up the disk alias and return the block stats
struct so that it can be reused later in qemuDomainBlockStatsFlags.
The function uses qemuMonitorGetAllBlockStatsInfo instead of
qemuMonitorGetBlockStatsInfo.
Our virDomainBlockStatsFlags API uses the old approach where, when it's
called without the typed parameter array, returns the count of parameters
supported by qemu.
The supported parameter count is obtained via separate monitor calls
which is a waste since we can calculate it when gathering the data.
This patch adds code to the qemuMonitorGetAllBlockStatsInfo workers that
allows to track the count of supported fields reported by qemu and will
allow to remove the old duplicate code.
The function that is extracting block stats data from the QMP monitor
reply contains a lot of repeated code. Since I'd be changing each of the
copies in the next patch, lets convert it to a macro right away.
Add a different version of parser for "info blockstats" that basically
parses the same information as the existing copy of the function.
This will allow us to remove the single device version
qemuMonitorGetBlockStatsInfo in the future.
The new implementation uses few new helpers so it should be more
understandable and provides a test case to verify that it works.
Allocate the hash table in the monitor wrapper function instead of the
worker itself so that the text monitor impl that will be added in the
next patch doesn't have to duplicate it.
If a domain object is being removed and looked up concurrently we must
ensure we unlock the object before unreferencing it, since the latter
might free the object.
The flaw was introduced in commit feb1a4d792.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Undefining a running, autostarted domain removes the autostart link, but
dom->autostart is not cleared. If the domain is subsequently redefined,
libvirt thinks it is already autostarted and will not create the link
even if requested:
# virsh dominfo example | grep Autostart
Autostart: enable
# ls /etc/libvirt/qemu/autostart/example.xml
/etc/libvirt/qemu/autostart/example.xml
# virsh undefine example
Domain example has been undefined
# virsh define example.xml
Domain example defined from example.xml
# virsh dominfo example | grep Autostart
Autostart: enable
# virsh autostart example
Domain example marked as autostarted
# ls /etc/libvirt/qemu/autostart/example.xml
ls: cannot access /etc/libvirt/qemu/autostart/example.xml: No such file or directory
This commit ensures dom->autostart is cleared whenever the config and
autostart link (if present) are removed.
The bridge network driver cleared this flag itself in networkUndefine.
This commit moves this into virNetworkDeleteConfig for symmetry with
virDomainDeleteConfig, and to ensure it is not missed in future network
drivers.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Error messages are already set in all code paths returning -1 from
networkGetNetworkAddress, so we don't want to overwrite them.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
When creating qemu capabilities, a dummy virDomainObj is created just
because our monitor code expects that. However, the object is created
locked already. Then, under cleanup label, we simply unref the object
which results in whole domain object to be disposed. The object lock
is destroyed subsequently, but hey - it's still locked:
==24845== Thread #14's call to pthread_mutex_destroy failed
==24845== with error code 16 (EBUSY: Device or resource busy)
==24845== at 0x4C3024E: pthread_mutex_destroy (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==24845== by 0x531F72E: virMutexDestroy (virthread.c:83)
==24845== by 0x5302977: virObjectLockableDispose (virobject.c:237)
==24845== by 0x5302A89: virObjectUnref (virobject.c:265)
==24845== by 0x1DD37866: virQEMUCapsInitQMP (qemu_capabilities.c:3397)
==24845== by 0x1DD37CC6: virQEMUCapsNewForBinary (qemu_capabilities.c:3481)
==24845== by 0x1DD381E2: virQEMUCapsCacheLookup (qemu_capabilities.c:3609)
==24845== by 0x1DD30F8A: virQEMUCapsInitGuest (qemu_capabilities.c:744)
==24845== by 0x1DD31889: virQEMUCapsInit (qemu_capabilities.c:1020)
==24845== by 0x1DD7DD36: virQEMUDriverCreateCapabilities (qemu_conf.c:888)
==24845== by 0x1DDC57C0: qemuStateInitialize (qemu_driver.c:803)
==24845== by 0x53DC743: virStateInitialize (libvirt.c:777)
==24845==
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
in virDomainFSInfoFree(), don't free the virDomainFSInfo data.
==10670== 80 bytes in 2 blocks are definitely lost in loss record 576 of 793
==10670== at 0x4A06BC3: calloc (vg_replace_malloc.c:618)
==10670== by 0x509DEBD: virAlloc (viralloc.c:144)
==10670== by 0x19FBD558: qemuAgentGetFSInfo (qemu_agent.c:1837)
==10670== by 0x1A03CF91: qemuDomainGetFSInfo (qemu_driver.c:19238)
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Commit 4bbe1029f fixed a problem in commit f7afeddc by moving the call
to virNetDevGetIndex() to a location common to all interface types (so
that the nicindex array would be filled in for macvtap as well as tap
interfaces), but the location was *too* common, as the original call
to virNetDevGetIndex() had been in a section qualified by "if
(cfg->privileged)". The result was that the "fixed" libvirtd would try
to call virNetDevGetIndex() even for session mode libvirtd, and end up
failing with the log message:
Unable to open control socket: Operation not permitted
To remedy that, this patch qualifies the call to virNetDevGetIndex()
in its new location with cfg->privileged.
This resolves https://bugzilla.redhat.com/show_bug.cgi?id=1198244
As of bba93d40 all of our RPC objects are derived from
virObjectLockable. However, during rewrite some errors sneaked
in. For instance, the dispose functions to virNetClient and
virNetServerClient objects were not only freeing allocated
memory, but unlocking themselves. This is wrong. Object should
never disappear while locked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Well, one day this will be self-locking object, but not today.
But lets prepare the code for that! Moreover,
virNetworkObjListFree() is no longer needed, so turn it into
virNetworkObjListDispose().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This API will be used in the future to call passed callback over
each network object in the list. It's slightly different to its
virDomainObjListForEach counterpart, because virDomainObjList
uses a hash table to store domain object, while virNetworkObjList
uses an array.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit v1.2.4-52-gda879e5 fixed issues with domains started before
sanlock driver was enabled by checking whether a running domain is
registered with sanlock and if it's not, sanlock driver is basically
ignored for the domain.
However, it was checking this even for domain which has just been
started and no sanlock_* API was called for them yet. This results in
cmd 9 target pid 2135544 not found
error messages to appear in sanlock.log whenever we start a new domain.
This patch avoids this useless check for freshly started domains.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virLockManager*New APIs are never called with
VIR_LOCK_MANAGER_USES_STATE. Moreover, lockd driver does not maintain
any state that would need to be transferred during migration and thus it
should not mention VIR_LOCK_MANAGER_USES_STATE at all.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
By adding a call and check of return of virBitmapToData to the
IOThreads code, my Coverity checker lets me know qemuDomainHelperGetVcpus
also needs to check the status...
We have something like pvpanic device. However, in some cases it does
not have any address assigned, in which case we produce this ugly XML
(still valid though):
<devices>
<emulator>/usr/bin/qemu</emulator>
...
<panic>
</panic>
</devices>
Lets format "<panic/>" instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Depending on the flags passed, either attempt to return the active/live
IOThread data for the domain or the config data.
The active/live path will call into the Monitor in order to get the
IOThread data and then correlate the thread_id's returned from the
monitor to the currently running system/threads in order to ascertain
the affinity for each iothread_id.
The config path will map each of the configured IOThreads and return
any configured iothreadspin data
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add virDomainGetIOThreadInfo in order to return a list of
virDomainIOThreadInfoPtr structures which list the IOThread ID
and the CPU Affinity map for each IOThread for the domain.
For an active domain, the live data will be returned, while for
an inactive domain, the config data will be returned.
The API supports either the --live or --config flag, but not both.
Also added virDomainIOThreadsInfoFree in order to free the cpumap
and the IOThreadInfo structure.
Signed-off-by: John Ferlan <jferlan@redhat.com>
There was a mess in the way how we store unlimited value for memory
limits and how we handled values provided by user. Internally there
were two possible ways how to store unlimited value: as 0 value or as
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED. Because we chose to store memory
limits as unsigned long long, we cannot use -1 to represent unlimited.
It's much easier for us to say that everything greater than
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED means unlimited and leave 0 as valid
value despite that it makes no sense to set limit to 0.
Remove unnecessary function virCompareLimitUlong. The update of test
is to prevent the 0 to be miss-used as unlimited in future.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146539
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The first one is to truncate the memory limit to
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED if the value is greater and the second
one is to decide whether the memory limit is set or not, unlimited means
that it's not set.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Pass the TPM file descriptor to QEMU via command line.
Instead of passing /dev/tpm0 we now pass /dev/fdset/10 and the additional
parameters -add-fd set=10,fd=20.
This addresses the use case when QEMU is started with non-root privileges
and QEMU cannot open /dev/tpm0 for example.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Implement virCommandPassFDGetFDIndex to determine the index a given
file descriptor will have when passed to the child process.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
In the old days of a global driver lock, it was necessary to unlock
the driver after a domain restore operation. When the global lock
was removed from the driver, some remnants were left behind in
libxlDomainRestoreFlags. Remove this unneeded (and incorrect) code.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Domain death watch is already disabled in libxlDomainCleanup. No
need to disable it a second and third time.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Since the APIs support just one element per namespace and while
modifying an element all duplicates would be removed, let's do this
right away in the post parse callback.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1190590
Adding functionality to libvirt that will allow it
query the ethtool interface for the availability
of certain NIC HW offload features
Here is an example of the feature XML definition:
<device>
<name>net_eth4_90_e2_ba_5e_a5_45</name>
<path>/sys/devices/pci0000:00/0000:00:03.0/0000:08:00.1/net/eth4</path>
<parent>pci_0000_08_00_1</parent>
<capability type='net'>
<interface>eth4</interface>
<address>90:e2:ba:5e:a5:45</address>
<link speed='10000' state='up'/>
<feature name='rx'/>
<feature name='tx'/>
<feature name='sg'/>
<feature name='tso'/>
<feature name='gso'/>
<feature name='gro'/>
<feature name='rxvlan'/>
<feature name='txvlan'/>
<feature name='rxhash'/>
<capability type='80203'/>
</capability>
</device>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Well, the parallelsConnectOpen() joins several sub-driver openings
into one big if condition. If any of sub-driver fails to open, the
whole API finishes immediately. The problem is, sub-drivers may have
left some memory allocated. Fortunately, we have a free function for
that: parallelsConnectClose(). This is, however, not prepared for
partially allocated driver structure. So, prepare the free function
for it and call it at the right place, in the if body.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
According to the POSIX standard, off_t (returned by lseek) is defined as
signed integral type no shorter than int. Because our offset variable is defined
as unsigned long long, the original check was passed successfully if UINT64_MAX had
been used as offset value, due to implicit conversion.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1177219
When the domain's source disk type is network, if source protocol is rbd
or sheepdog, the 'if().. break' will end the current case, which lead to
miss check the driver type is raw or qcow2. Libvirt will allow to create
internal snapshot for a running domain with raw format disk which based
on rbd storage.
While both protocols support internal snapshots of the disk qemu is not
able to use it as it requires some place to store the memory image. The
check if the disk is backed by a qcow2 image needs to be executed
always.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1179533
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
Previously when a domain would get stuck in a domain job due to a
programming mistake we'd report the following control state:
$ virsh domcontrol domain
occupied (1424343406.150s)
The timestamp is invalid as the monitor was not entered for that domain.
We can use that to detect that the domain has an active job and report a
better error instead:
$ virsh domcontrol domain
error: internal (locking) error
In order to hide the object internals (and use just accessors
everywhere), lets store a pointer to the object, instead of object
itself.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In order to hide the object internals (and use just accessors
everywhere), lets store a pointer to the object, instead of object
itself.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In order to hide the object internals (and use just accessors
everywhere), lets store a pointer to the object, instead of object
itself.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of copying the whole object onto stack when calling the
function, just pass the pointer to the object and save up some
space on the stack. Moreover, this prepares the code to hide the
virNetworkObjList structure into network_conf.c and use accessors
only.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
All of our vir*Free() functions should accept NULL, even though
that there's no way of actually passing NULL with current code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is probably a copy-paste error from virDomainObj*
counterpart. But when speaking of virNetworkObj we should use
variable @nets for an array of networks, rather than @doms. It's
just confusing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Moreover, there are two points within the function, where we're
missing 'goto cleanup'. Fix this too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Silly this bug went unnoticed so long. At the beginning we try to
find the passed network in the list of network objects. If found,
it's locked and real work takes place. Then, in the end, the
network object is never unlocked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Okay, this is mainly for educational purposes since is called
from single point only with all the possible locks held. So
there's no way for other thread to hop in and do something wrong.
Nevertheless, we should not give bad example.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have this function networkObjFromNetwork() which for given
virNetworkPtr tries to find corresponding virNetworkObjPtr. If no
object is found, a nice error message is printed out:
no network with matching uuid '$uuid' ($name)
Let's improve the error message produced by networkLookupByUUID to
follow that logic.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1197600
So, libvirt uses pid file to track pid of started qemus. Whenever
a domain is started, its pid is put into corresponding pid file.
The pid file path is generated based on domain name and stored
into domain object internals. However, it's not stored in the
status XML and therefore lost on daemon restarts. Hence, later,
when domain is being shut down, the daemon does not know which
pid file to unlink, and the correct pid file is left behind. To
avoid this, lets generate the pid file path again in
qemuProcessReconnect().
Reported-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of checking defaultMode for every channel that has no mode
configured, test it only once outside of channel loop. This fixes a bug
that in case all possible channels are fore example set to insecure, but
defaultMode is set to secure, we wouldn't auto-generate TLS port. This
results in failure while starting a guest.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1143832
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We have two different places that needs to be updated while touching
code for allocation spice ports. Add a bool option to
'qemuProcessSPICEAllocatePorts' function to switch between true and fake
allocation so we can use this function also in qemu_driver to generate
native domain definition.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Since adding the support for scheduler policy settings in commit
8680ea97, there are two enums with the same information. That was
caused by rewriting the patch since first draft.
Find out thanks to clang, but there was no impact whatsoever.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The problem here was that when opening a channel, we were checking
whether the channel given is alias (can't be NULL for running domain) or
it's name, which can be NULL (for example with spicevmc). In case of
such domain qemuDomainOpenChannel() made the daemon crash.
STREQ_NULLABLE() is safe to use since the code in question is wrapped in
"if (name)" and is more readable, so use that instead of checking for
non-NULL "vm->def->channels[i]->target.name".
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The virStorageBackendISCSIFindPoolSources API only needs the 'host' name
in order to discover iSCSI pools, it returns the various device paths.
On input, it's also possible to further restrict a search by providing the
port attribute for the host element and the (undocumented) initiator element.
For example:
$ virsh find-storage-pool-sources-as iscsi
error: Failed to find any iscsi pool sources
error: invalid argument: hostname and device path must be specified for iscsi sources
$ virsh find-storage-pool-sources-as iscsi 192.168.122.1
<sources>
<source>
<host name='192.168.122.1' port='3260'/>
<device path='iqn.2013-12.com.example:iscsi-chap-lclpool'/>
</source>
</sources>
https://bugzilla.redhat.com/show_bug.cgi?id=1181062
According to the formatstorage.html description for <source> element
and "format" attribute: "All drivers are required to have a default
value for this, so it is optional."
As it turns out the disk backend did not choose a default value, so I
added a default of "msdos" if the source type is "unknown" as well as
updating the storage.html backend disk volume driver documentation to
indicate the default format is dos.
https://bugzilla.redhat.com/show_bug.cgi?id=1142631
This patch resolves a situation where the same "<target dev='$name'...>"
can be used for multiple disks in the domain.
While the $name is "mostly" advisory regarding the expected order that
the disk is added to the domain and not guaranteed to map to the device
name in the guest OS, it still should be unique enough such that other
domblk* type operations can be performed.
Without the patch, the domblklist will list the same Target twice:
$ virsh domblklist $dom
Target Source
------------------------------------------------
sda /var/lib/libvirt/images/file.qcow2
sda /var/lib/libvirt/images/file.img
Additionally, getting domblkstat, domblkerror, domblkinfo, and other block*
type calls will not be able to reference the second target.
Fortunately, hotplug disallows adding a "third" sda value:
$ qemu-img create -f raw /var/lib/libvirt/images/file2.img 10M
$ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sda
error: Failed to attach disk
error: operation failed: target sda already exists
$
BUT, it since 'sdb' doesn't exist one would get the following on the same
hotplug attempt, but changing to use 'sdb' instead of 'sda'
$ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sdb
error: Failed to attach disk
error: internal error: unable to execute QEMU command 'device_add': Duplicate ID 'scsi0-0-1' for device
$
Since we cannot fix this issue at parsing time, the best that can be done so
as to not "lose" a domain is to make the check prior to starting the guest
with the results as follows:
$ virsh start $dom
error: Failed to start domain $dom
error: XML error: target 'sda' duplicated for disk sources '/var/lib/libvirt/images/file.qcow2' and '/var/lib/libvirt/images/file.img'
$
Running 'make check' found a few more instances in the tests where this
duplicated target dev value was being used. These also exhibited some
duplicated 'id=' values (negating the uniqueness argument of aliases) in
the corresponding .args file and of course the *xmlout version of a few
input XML files.
NUMA enabled guest configuration explicitly specifies memory sizes for
individual nodes. Allowing the virDomainSetMemoryFlags API (and friends)
to change the total doesn't make sense as the individual node configs
are not updated in that case.
Forbid use of the API in case NUMA is specified.
Add VIR_VOL_XML_PARSE_OPT_CAPACITY flag to virStorageVolDefParseXML.
With this flag, no error is reported when the capacity is missing
if there is a backing store.
Instead of just looking at the output of fstat, call
virStorageFileGetMetadata to get the full capacity from
image headers.
Note that the capacity is probed unconditionally. The updateCapacity
bool parameter is ignored and will be removed in the following commit.
In virStorageVolCreateXML, add VIR_VOL_XML_PARSE_NO_CAPACITY
to the call parsing the XML of the new volume to make the capacity
optional.
If the capacity is omitted, use the capacity of the old volume.
We already do that for values that are less than the original
volume capacity.
If we combine the boot order on the command line with other
boot options, we prepend order= in front of it.
Instead of checking if the number of added arguments is between
0 and 2, separate the strings for boot order and options
and prepend boot order only if both strings are not empty.
Commit 6992994 started filling the listen attribute
of the parent <graphics> elements from type='network' listens.
When this XML is passed to UpdateDevice, parsing fails:
XML error: graphics listen attribute 10.20.30.40 must match
address attribute of first listen element (found none)
Ignore the address in the parent <graphics> attribute
when no type='address' listens are found,
the same we ignore the address for the <listen> subelements
when parsing inactive XML.
The gluster volume name extraction code was copied from the XML parser
without changing the VIR_ERR_XML_ERROR error code. Use
VIR_ERR_CONFIG_UNSUPPORTED instead.
Similar to commit fdb80ed4f6 libvirtd
would crash if a gluster URI without path would be used in the backing
chain of a volume. The crash happens in the gluster specific part of the
parser that extracts the gluster volume name from the path.
Fix the crash by checking that the PATH is NULL.
This patch does not contain a test case as it's not possible to test it
with the current infrastructure as the test suite would attempt to
contact the gluster server in the URI. I'm working on the test suite
addition but that will be post-release material.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1196528
In virNetworkDHCPHostDefParseXML an error is reported
when partialOkay == true, and none of ip, mac, name
were supplied.
Add the missing goto and error out in this case.
https://bugzilla.redhat.com/show_bug.cgi?id=1196503
We already check whether the host id is valid or not, add a jump
to forbid invalid host id.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Commit f7afeddc added code to report to systemd an array of interface
indexes for all tap devices used by a guest. Unfortunately it not only
didn't add code to report the ifindexes for macvtap interfaces
(interface type='direct') or the tap devices used by type='ethernet',
it ended up sending "-1" as the ifindex for each macvtap or hostdev
interface. This resulted in a failure to start any domain that had a
macvtap or hostdev interface (or actually any type other than
"network" or "bridge").
This patch does the following with the nicindexes array:
1) Modify qemuBuildInterfaceCommandLine() to only fill in the
nicindexes array if given a non-NULL pointer to an array (and modifies
the test jig calls to the function to send NULL). This is because
there are tests in the test suite that have type='ethernet' and still
have an ifname specified, but that device of course doesn't actually
exist on the test system, so attempts to call virNetDevGetIndex() will
fail.
2) Even then, only add an entry to the nicindexes array for
appropriate types, and to do so for all appropriate types ("network",
"bridge", and "direct"), but only if the ifname is known (since that
is required to call virNetDevGetIndex().
Previously this function relied on having ATTRIBUTE_NONNULL(1) in its
prototype rather than explicitly checking for a null
ifname. Unfortunately, ATTRIBUTE_NONNULL is just a hint to the
optimizer and code analyzers like Coverity, it doesn't actually check
anything at execution time, so the result was possible warnings from
Coverity, along with the possibility of null dereferences when ifname
wasn't available.
This patch removes the ATTRIBUTE_NONNULL from the prototype, and
checks ifname inside the function, logging an error if it's NULL (once
we've determined that the user really is trying to set a bandwidth).
libvirt was unconditionally calling virNetDevBandwidthClear() for
every interface (and network bridge) of a type that supported
bandwidth, whether it actually had anything set or not. This doesn't
hurt anything (unless ifname == NULL!), but is wasteful.
This patch makes sure that all calls to virNetDevBandwidthClear() are
qualified by checking that the interface really had some bandwidth
setup done, and checks for a null ifname inside
virNetDevBandwidthClear(), silently returning success if it is null
(as well as removing the ATTRIBUTE_NONNULL from that function's
prototype, since we can't guarantee that it is never null,
e.g. sometimes a type='ethernet' interface has no ifname as it is
provided on the fly by qemu).
If the qemu binary on x86 does not support lsi SCSI controller,
but it supports virtio-scsi, we reject the virtio-specific attributes
for no reason.
Move the default controller assignment before the check.
https://bugzilla.redhat.com/show_bug.cgi?id=1168849
https://bugzilla.redhat.com/show_bug.cgi?id=1183869
Soo. you've successfully started yourself a domain. And since you want
to use it on your host exclusively you are confident enough to
passthrough the host CPU model, like this:
<cpu mode='host-passthrough'/>
Then, after a while, you want to save the domain into a file (e.g.
virsh save dom dom.save). And here comes the trouble. The file consist
of two parts: Libvirt header (containing domain XML among other
things), and qemu migration data. Now, the domain XML in the header is
formatted using special flags (VIR_DOMAIN_XML_SECURE |
VIR_DOMAIN_XML_UPDATE_CPU | VIR_DOMAIN_XML_INACTIVE |
VIR_DOMAIN_XML_MIGRATABLE).
Then, on your way back from the bar, you think of changing something
in the XML in the saved file (we have a command for it after all), say
listen address for graphics console. So you successfully type in the
command:
virsh save-image-edit dom.save
Change all the bits, and exit the editor. But instead of success
you're left with sad error message:
error: unsupported configuration: Target CPU model <null> does not
match source Pentium Pro
Sigh. Digging into the code you see lines, where we check for ABI
stability. The new XML you've produced is compared with the old one
from the saved file to see if qemu ABI will break or not. Wait, what?
We are using different flags to parse the XML you've provided so we
were just lucky it worked in some cases? Yep, that's right.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Well, not that we are not formatting invalid XML, rather than not as
beautiful as we can:
<cpu mode='host-passthrough'>
</cpu>
If there are no children, let's use the singleton element.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Well, so far there are no variables to free, no cleanup work needed on
an error, so bare 'return -1;' after each error is just okay. But this
will change in a while.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This API joins the following two lines:
char *s = virBufferContentAndReset(buf1);
virBufferAdd(buf2, s, -1);
into one:
virBufferAddBuffer(buf2, buf1);
With one exception: there's no re-indentation applied to @buf1.
The idea is, that in general both can have different indentation
(like the test I'm adding proves)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In commit cc41c648 I've re-factored qemuMonitorFindBalloonObjectPath, but
missed that there is a memory leak. The "nextpath" variable is
overwritten while looping in for cycle and we have to free it before next
cycle.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1151942
While the restriction doesn't have origin in any RFC, it matters
to us while constructing the dnsmasq config file (or command line
previously). For better picture, this is how the corresponding
part of network XML look like:
<dns>
<forwarder addr='8.8.4.4'/>
<txt name='example' value='example value'/>
</dns>
And this is how the config file looks like then:
server=8.8.4.4
txt-record=example,example value
Now we can see why there can't be any commas in the TXT name.
They are used by dnsmasq to separate @name and @value.
Funny, we have it in the documentation, but the code (which was
pushed back in 2011) didn't reflect that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Making use of the ARCH_IS_S390 macro introduced with
e808357528
Signed-off-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Since s390 does not support usb the default creation of a usb controller
for a domain should not occur.
Also adjust s390 test cases by removing usb device instances since
usb devices are no longer created by default for s390 the s390
test cases need to be adjusted.
Signed-off-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
This implement handling of <backenddomain name=''/> parameter introduced
in previous patch.
Works on Xen >= 4.3, because only there libxl supports setting backend
domain by name. Specifying backend domain by ID or UUID is currently not
supported.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
At least Xen supports backend drivers in another domain (aka "driver
domain"). This patch introduces an XML config option for specifying the
backend domain name for <disk> and <interface> devices. E.g.
<disk>
<backenddomain name='diskvm'/>
...
</disk>
<interface type='bridge'>
<backenddomain name='netvm'/>
...
</interface>
In the future, same option will be needed for USB devices (hostdev
objects), but for now libxl doesn't have support for PVUSB.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
The function that parses the <forward> subelement of a network used to
fail/log an error if the network definition contained both a <pf>
element as well as at least one <interface> or <address> element. That
check was present because the configuration of a network should have
either one <pf>, one or more <interface>, or one or more <address>,
but never combinations of multiple kinds.
This caused a problem when libvirtd was restarted with a network
already active - when a network with a <pf> element is started, the
referenced PF (Physical Function of an SRIOV-capable network card) is
checked for VFs (Virtual Functions), and the <forward> is filled in
with a list of all VFs for that PF either in the form of their PCI
addresses (a list of <address>) or their netdev names (a list of
<interface>); the <pf> element is not removed though. When libvirtd is
restarted, it parses the network status and finds both the original
<pf> from the config, as well as the list of either <address> or
<interface>, fails the parse, and the network is not added to the
active list. This failure is often obscured because the network is
marked as autostart so libvirt immediately restarts it.
It seems odd to me that <interface> and <address> are stored in the
same array rather than keeping two separate arrays, and having
separate arrays would have made the check much simpler. However,
changing to use two separate arrays would have required changes in
more places, potentially creating more conflicts and (more
importantly) more possible regressions in the event of a backport, so
I chose to keep the existing data structure in order to localize the
change.
It appears that this problem has been in the code ever since support
for <pf> was added (0.9.10), but until commit
34cc3b2f10 (first in libvirt 1.2.4)
networks with interface pools were not properly marked as active on
restart anyway, so there is no point in backporting this patch any
further than that.
Later patches will need to access the full definition to do check the
memory size and thus the checking needs to be done after the whole
definition including devices is known.
For historical reasons data regarding NUMA configuration were split
between the CPU definition and numatune. We cannot do anything about the
XML still being split, but we certainly can at least store the relevant
data in one place.
This patch moves the NUMA stuff to the right place.
As virDomainNumatuneSet now doesn't allocate the virDomainNuma object
any longer it's not necessary to pass the pointer to a pointer to store
the object as it will not change any longer.
While touching the parameter definitions I've also changed the name of
the parameter to "numa".
Since our formatter now handles well if the config is allocated and not
filled we can safely always-allocate the NUMA config and remove the
ad-hoc allocation code.
This will help in later patches as the parser will be refactored to just
fill the data.
Move the existing virDomainDefNew to virDomainDefNewFull as it's setting
a few things in the conf and re-introduce virDomainDefNew as a function
without parameters for common use.
Do a content-aware check if formatting of the <numatune> element is
necessary. Later on the def->numa structure will be always present so we
cannot decide only on the basis whether it's allocated.
Shuffling around the logic will allow to simplify the code quite a bit.
As an additional bonus the change in the logic now reports an error if
automatic placement is selected and individual placement is configured.
Currently the code would exit without reporting an error as
virBitmapParse reports one only if it fails to parse the bitmap, whereas
the code was jumping to the error label even in case 0 cpus were
correctly parsed in the map.
It's easier to recalculate the number in the one place it's used as
having a separate variable to track it. It will also help with moving
the NUMA code to the separate module.
Name it virNumaMemAccess and add it to conf/numa_conf.[ch]
Note that to avoid a circular dependency the type of the NUMA cell
memAccess variable was changed to int. It will be turned back later
after the circular dependency will not exist.
