CPU models in the CPU map may be marked with <check partial="compat"/>
to indicate a backward compatible partial check (comparing our
definition of the model with the host CPU) should be performed. Other
models will be checked using just runnability info from QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update with latest lcitool.
Update the build templates to move the definition of exit codes which
are allowed to fail for cirrus jobs for cases when we run out of CI
minutes. The previous location was overridden with the per-job
'allow_failure' value and thus didn't apply.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The libvirt xen driver does not support nwfilters. In fact, since
commit d721b6840f, the driver rejects VM configuration referencing
nwfilters. Drop the needless nwfilter dependency from
libvirt-daemon-xen.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Laine Stump <Laine@redhat.com>
Mention that hypervisors may need a temporary file and document the qemu
template for creating them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When a VM is terminated by host reboot libvirt doesn't get to cleaning
out the temporary overlay file used for transient disks. Since we create
those files with a very specific suffix it's almost guaranteed that if
it exists it's a leftover from a libvirt run. Delete them instead of
complaining to preserve functionality.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/684
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It's not only used on x86_64 these days. See virSysinfoRead().
Technically we should include loongarch64 in the list as well,
but Fedora hasn't been bootstrapped on the architecture yet,
and when the time comes several more changes are going to be
necessary anyway.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than reimplement everything manually use virBitmapBuffsize to
find the current number of units, realloc the buffer and clear the tail
using virBitmapClearTail().
This fixes a corner case where the buffer would be over-allocated by one
unit when shrinking to the boundary of the unit size.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Extract the clearing of the traling bits from 'virBitmapSetAll' into a
new helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Calculating the number of element can come handy in multiple places,
extract it from virBitmapNew.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
'virBitmapNewCopy()' allocates a new bitmap with the same number of bits
but uses the internal allocation length as argument for the memcpy()
operation to copy the bits. Due to bugs in other code these may not be
the same resulting into a buffer overflow if the source is
over-allocated. Use the buffer length of the target bitmap instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
There's a typo in NEWS.rst where
VIR_MIGRATE_PARAM_MIGRATE_DISKS_DETECT_ZEROES has the _ZEROES
suffix duplicated referring to a non-existent migration
parameter. Drop the suffix.
Fixes: 2e29ab3269
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When constructing the command line for QEMU, some Hyper-V features were
hardcoded, probably due to the fact that they could not have been
automatically translated from the libvirt feature name to QEMU CPU
feature name.
Well now they can be, thanks to their additions to the
virQEMUCapsCPUFeaturesX86 translation table.
Translate all such features the same way when constructing the command
line. This way any future feature that is not translated will be caught
by tests (if a test is added for it) which was not the case when it was
just hardcoded. Hopefully this avoids at least some possible future
issues.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Hyper-V enlightenment features can have hyphenated names which libvirt
exposes under Hyper-V features with underscored names. When libvirt
checks that all requested features were enabled by QEMU (on x86
architectures) it first queries for all those that QEMU knows and
compiles them in a map while using the virQEMUCapsCPUFeaturesX86 for
translations.
Some features (well, all Hyper-V features with underscores) were not
present in the translation table and were incorrectly reported as not
enabled, consequently failing the start of any such domain.
Add all hyphenated/underscored Hyper-V feature names into the
aforementioned translation table. That way domains with these features
enabled can be started when QEMU and the kernel support them.
Resolves: https://issues.redhat.com/browse/RHEL-7122
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Major changes:
* macOS 13 is removed. Cirrus CI now only supports a single
version, macOS 14, so there is no addition of macOS 15
possible.
* The polkit lcitool mapping is renamed to pkcheck
* The polkit package is renamed on Debian & Ubuntu
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The wireshark address.h header uses 'g_memdup2' but this triggers
warnings under clang due to the max version cap:
In file included from ../tools/wireshark/src/plugin.c:27:
In file included from /usr/include/wireshark/epan/proto.h:30:
In file included from /usr/include/wireshark/epan/packet_info.h:15:
/usr/include/wireshark/epan/address.h:107:18: error: 'g_memdup2' is deprecated: Not available before 2.68 [-Werror,-Wdeprecated-declarations]
107 | addr->priv = g_memdup2(&val, sizeof(val));
| ^
/usr/include/glib-2.0/glib/gstrfuncs.h:341:1: note: 'g_memdup2' has been explicitly marked deprecated here
341 | GLIB_AVAILABLE_IN_2_68
| ^
/usr/include/glib-2.0/glib/glib-visibility.h:771:32: note: expanded from macro 'GLIB_AVAILABLE_IN_2_68'
771 | #define GLIB_AVAILABLE_IN_2_68 GLIB_UNAVAILABLE (2, 68)
| ^
/usr/include/glib-2.0/glib/glib-visibility.h:32:35: note: expanded from macro 'GLIB_UNAVAILABLE'
32 | #define GLIB_UNAVAILABLE(maj,min) G_UNAVAILABLE(maj,min) _GLIB_EXTERN
| ^
/usr/include/glib-2.0/glib/gmacros.h:1285:47: note: expanded from macro 'G_UNAVAILABLE'
1285 | #define G_UNAVAILABLE(maj,min) __attribute__((deprecated("Not available before " #maj "." #min)))
| ^
1 error generated.
It is unclear why clang warns, but gcc does not. Our plugin doesn't
actually use the inline helper in address.h that references g_memdup2,
but we get the warning regardless.
Interestingly removing the 'gmodule.h' include avoids the warning. Since
there is nothing in plugin.c that appears to need gmodule.h, removing it
should be safe & done regardless.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We currently create stub 'setcon', 'setcon_raw' and 'security_disable'
APIs in the securityselinuxhelper.c mock, which set env variables to
control how other mock'd libselinux APIs respond. These stubs merely
set some env variables, and we have no need to call these stubs from
the library code, only test code.
The 'security_disable' API is now deprecated in libselinux, so we
stubbing it generates compiler warnings. Rather than workaround that,
just stop stubbing these APIs and set the required env variables
directly. With this change, we now only mock API calls we actually
use from the library code.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
virDomainConfNWFilterInstantiate() was called without updated
net->ifname, it caused in some cases throwing error message. If
function failed, change is reverted.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/658
Signed-off-by: Adam Julis <ajulis@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Function qemuNamespaceMknodOne() is trying to replicate a file from the
parent namespace as perfectly as possible, with the same permissions,
labels, ACLs, etc.
If that file already existed it means that the qemu process is probably
using it already and the current setting is probably more correct than
the ones from the parent namespace.
In order to reflect that only replicate the file metadata when it was
(re-)created in this function.
Resolves: https://issues.redhat.com/browse/RHEL-62174
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Function qemuNamespaceMknodOne() is supposed to return 0 if the file did
not exist before this function. If, however, the file existed, but was
removed and recreated by this function the @existed flag should be reset
to its proper state (false) because the function then behaves the same
way as if the file did not exist as it needed to be recreated.
So reset the @existed flag to properly reflect what happened.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The boolean actually tells whether the file existed when the function
was called and using it in more places later on makes them
confusing (e.g. do something with a file if it does not exist). To
better reflect the above and prepare for next patch rename this
variable.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduce capabilities based on qemu commit 'v9.1.0-803-g05adb38839'.
Notable changes:
- new 9.2 machine types
- 'gluster' disk backend deprecated
- 'reconnect' option of chardevs replaced by 'reconnect-ms'
- this includes test output changes happening in this patch
as 'reconnect' was deprecated in the same patch that
introduced 'reconnect-ms' and thus couldn't be changed
incrementally
- cpu flags:
- 'ibpb-brtype' added
- 'vmx-exit-secondary-ctls' added
- 'vmx-entry-load-rtit-ctl' added
- migration capabilities/parameters
- 'zero-blocks' deprecated
- 'multifd-qatzip-level' added
- 'pty' chardev backend gained 'path' attribute
- 'cris' and 'she4b' arches removed (from 'query-cpus-fast' data)
- 'copy-before-write' block filter gained 'min-cluster-size'
- 'vhost-user-scmi', 'serial-mm' removed
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Upcoming qemu-9.2 will deprecate 'reconnect' in favor of 'reconnect-ms'.
Add pinned versions so that we test also the old syntax.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
qemu-9.2 will deprecate the 'reconnect' field in favor of
'reconnect-ms'. As libvirt currently doesn't track the timeouts in
milliseconds we simply convert them to avoid use of the deprecated
field.
Quite a lot of churn is caused by the need to plumb 'qemuCaps' into the
chardev props generator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
New qemu introduced the 'reconnect-ms' field for character devices
allowing the reconnect timeout to be specified in milliseconds, which
also deprecates the existing 'reconnect' field that libvirt uses.
To avoid use of deprecated interfaces add a capability which will allow
us to use the new field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The gluster protocol will be deprecated by qemu-9.2. Convert the tests
to NBD as it's trivial and the test cases are not concerned with a
specific protocol.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Convert one of the layers of the backing chain to 'nfs' to test if users
don't set the identity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The gluster protocol backend will be deprecated as of qemu-9.2. Allow
it for now in the QMP schema validator and mark them to be dropped once
gluster is removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The gluster protocol backend will be deprecated as of qemu-9.2. Allow it
for now in the QMP schema validator and mark them to be dropped once
gluster is removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Gluster will be deprecated in the upcoming qemu version thus we need to
replace the network protocol by something which will stay supported so
that we can keep the tests around.
Convert all cases referencing 'gluster' to 'nbd'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In Debian 12, the qemu-system-i386 binary in /usr/bin is a wrapper
script, with the actual executable living in /usr/libexec instead.
This makes it impossible to run i686 VMs when AppArmor is enabled.
Allow running the actual binary.
https://bugs.debian.org/1030926
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
'qemuSnapshotDeleteBlockJobIsRunning' returns only 0 and 1. Convert it
to bool and remove the dead code handling -1 return in the caller.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/682
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The migration parameter causes zero detection to be enabled and zero
blocks are *not* transferred to the destination. This means that users
must provide pre-cleared images that read all zero, otherwise the
non-zero blocks on destination which reside in places where the source
has zero blocks would be kept intact corrupting the image.
As not transferring and overwriting the zero blocks is what the feature
is supposed to do the users need to provide the proper environment.
Document the requirement, both in API and in the virsh man page for the
'--migrate-disks-detect-zeroes' option.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The idea of migration with VIR_MIGRATE_PARAM_MIGRATE_DISKS_DETECT_ZEROES
populated is to sparsify the image. The QEMU NBD client as it was
configured in commit 621f879adf would
signal to the destination to do thick allocation of holes which would
result in a non-sparse image for any backend except a qcow2 image which
I used to test it.
Switch to VIR_DOMAIN_DISK_DETECT_ZEROES_UNMAP and
VIR_DOMAIN_DISK_DISCARD_UNMAP which tells the NBD client (and that in
turn the NBD server) to preserve the sparse blocks it detected from the
image.
Fixes: 621f879adf
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
major() is a macro defined in sys/sysmacros.h so luckily the code works,
but it's very confusing. Let's rename the local variable to make the
difference between it and the macro more obvious. And while touching the
line we can also initialize it to make sure "clever" analyzers do not
think it may be used uninitialized.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
With watchdog action=dump the actual watchdog action is set to pause and
the daemon then proceeds to dump the process. After that the domain is
resumed. That was the case since the feature was added. However the
resuming of the domain might be unexpected, especially when compared to
HW watchdog, which will never run the guest from the point where it got
interrupted.
Document the pre-existing behaviour, since any change might be
unexpected as well. Change of behaviour would require new options like
dump+reset, dump+pause, etc. That option is still possible, but
orthogonal to this change.
Resolves: https://issues.redhat.com/browse/RHEL-753
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When the daemons were split out from the monolithic libvirtd, the
network driver didn't implement "inhibit idle timeout if there are any
active objects" as was done for other drivers, so virtnetworkd would
always exit after 120 seconds of no incoming connections. This didn't
every cause any visible problem, although it did mean that anytime a
network API was called after an idle time > 120 seconds, that the
restarting virtnetworkd would flush and reload all the
iptables/nftables rules for any active networks.
This patch replicates what is done in the QEMU driver - an nactive is
added to the network driver object, along with an inhibitCallback; the
latter is passed into networkStateInitialize when the driver is
loaded, and the former is incremented for each already-active network,
then incremented/decremented each time a network is started or
stopped. If nactive transitions from 0 to 1 or 1 to 0, inhibitCallback
is called, and it "does the right stuff" to prevent/enable the idle
timeout.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The Xen libxl driver does not support nwfilter. Introduce a
deviceValidateCallback function with a check for nwfilters, returning
VIR_ERR_CONFIG_UNSUPPORTED if any are found. Also fail to start any
existing VMs referencing nwfilters.
Drivers generally ignore unrecognized XML configuration, but ignoring
a user's request to filter VM network traffic can be viewed as a
security issue.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
