Similar to commit 57d084febe, another case of the libxl driver not
adapting to modular daemons. When converting configuration that
contains a type='network' interface, the converter calls
virNetworkLookupByName, passing the hypervisor connection object
instead of a connection to virtnetworkd. E.g.
> cat dom.xml
...
<interface type='network'>
<source network='default'/>
</interface>
...
> virsh net-info default
Name: default
UUID: 25a5b089-1e71-4956-99aa-df2213bbb407
Active: yes
Persistent: no
Autostart: no
Bridge: virbr0
> virsh domxml-to-native xen-xl dom.xml
error: Network not found: default
Acquire a connection to virtnetworkd and use it when calling
virNetwork* APIs.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The mpx feature was removed from the corresponding qemu cpu models.
With mpx in the libvirt cpu models, libvirt believes the feature
to be implicitly enabled when creating qemu VMs, while in fact it is
disabled.
This became an issue when commit 94eacd5a5f introduced new vmx-*
features, of which some are dependent on mpx (see "feature_dependencies"
table in qemu target/i386/cpu.c), e.g. vmx-exit-clear-bndcfgs and
vmx-entry-load-bndcfgs. These features cannot be enabled by qemu
without also mpx being enabled, leading to the error message
error: Failed to create domain from testdomain.xml
error: operation failed: guest CPU doesn't match
specification: missing features: mpx,vmx-exit-clear-bndcfgs,
vmx-entry-load-bndcfgs
when trying to create a VM with a "host-model" cpu on a host that
does support mpx and the mentioned vmx-* features:
<domain>
...
<cpu mode='host-model' check='full' />
...
</domain>
Resolve the issue by removing mpx from libvirt's cpu models as well.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Features removed from a CPU model are marked with "removed='yes'"
attribute in the CPU map. Such features will always be present in a CPU
definition produced by libvirt regardless on their state. In other words
a running domain (even saved in a file) will always explicitly contain
states of all features removed from the specified CPU model. This
enables migration to older libvirt which would otherwise think the
affected features should be enabled as they are still included in the
CPU model in the older version of CPU map. Migration from an old libvirt
to a new one would be broken as the new libvirt would think the removed
features should be disabled (because they are not included in the CPU
model anymore), which might not be the case on the source host. Thus we
were refusing to remove CPU features unless they were never working and
no domain could even be running with those features enabled.
This patch removes the limitation. When handling CPU definitions with
missing features marked as removed in the specified CPU model, we know
whether it comes from a running domain, in which case it must have been
created by older libvirt where the missing CPU features were not removed
yet. This means the features must have been enabled on the source and we
can automatically fix the definition by adding the missing features with
correct states.
We can safely remove any CPU feature from our CPU models now, but it
should only be used for features removed from all versions of a given
CPU model in QEMU because unversioned models correspond to v1.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virCPUUpdate check the CPU definition for features that were marked as
removed in the specified CPU model and explicitly adds those that were
not mentioned in the definition. So far such features were added with
VIR_CPU_FEATURE_DISABLE policy, but the caller may want to use a
different policy in some situations, which is now possible via the
removedPolicy parameter.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virCPUDefAddFeatureInternal helper function only fails if it is
called with VIR_CPU_ADD_FEATURE_MODE_EXCLUSIVE, which is only used in
virCPUDefAddFeature. The other callers (virCPUDefUpdateFeature and
virCPUDefAddFeatureIfMissing) will never get anything but 0 from
virCPUDefAddFeatureInternal and their return type can be changed to
void.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When using vSPC (Virtual Serial Port Concentrator) in vSphere the actual
address for it is saved in serialX.vspc in which case the
serialX.fileName is most probably something we can't get any useful
information from and we also fail during the parsing rendering any
dumpxml and similar tries unsuccessful.
Instead of parsing the vspc URL with something along the lines of
`virURIParse(vspc ? vspc : fileName)`, which could lead to us reporting
information that is very prune to misuse (the vSPC seemingly has a
protocol on top of the telnet connection; redefining the domain would
change the behaviour; the URL might have a fragment we are not saving;
etc.) or adding more XML knobs to indicate vSPC usage (which we would
not be able to configure; we'd have to properly error out everywhere;
etc.) let's just report dummy serial port that leads to nowhere (i.e.
type="null").
Resolves: https://issues.redhat.com/browse/RHEL-32182
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Users are seeing periodic segfaults from libvirt client apps,
especially thread heavy ones like virt-manager. A typical
stack trace would end up in the virNetClientIOEventFD method,
with illegal access to stale stack data. eg
==238721==ERROR: AddressSanitizer: stack-use-after-return on address 0x75cd18709788 at pc 0x75cd3111f907 bp 0x75cd181ff550 sp 0x75cd181ff548
WRITE of size 4 at 0x75cd18709788 thread T11
#0 0x75cd3111f906 in virNetClientIOEventFD /usr/src/debug/libvirt/libvirt-10.2.0/build/../src/rpc/virnetclient.c:1634:15
#1 0x75cd3210d198 (/usr/lib/libglib-2.0.so.0+0x5a198) (BuildId: 0a2311dfbbc6c215dc36f4b6bdd2b4b6fbae55a2)
#2 0x75cd3216c3be (/usr/lib/libglib-2.0.so.0+0xb93be) (BuildId: 0a2311dfbbc6c215dc36f4b6bdd2b4b6fbae55a2)
#3 0x75cd3210ddc6 in g_main_loop_run (/usr/lib/libglib-2.0.so.0+0x5adc6) (BuildId: 0a2311dfbbc6c215dc36f4b6bdd2b4b6fbae55a2)
#4 0x75cd3111a47c in virNetClientIOEventLoop /usr/src/debug/libvirt/libvirt-10.2.0/build/../src/rpc/virnetclient.c:1722:9
#5 0x75cd3111a47c in virNetClientIO /usr/src/debug/libvirt/libvirt-10.2.0/build/../src/rpc/virnetclient.c:2002:10
#6 0x75cd3111a47c in virNetClientSendInternal /usr/src/debug/libvirt/libvirt-10.2.0/build/../src/rpc/virnetclient.c:2170:11
#7 0x75cd311198a8 in virNetClientSendWithReply /usr/src/debug/libvirt/libvirt-10.2.0/build/../src/rpc/virnetclient.c:2198:11
#8 0x75cd31111653 in virNetClientProgramCall /usr/src/debug/libvirt/libvirt-10.2.0/build/../src/rpc/virnetclientprogram.c:318:9
#9 0x75cd31241c8f in callFull /usr/src/debug/libvirt/libvirt-10.2.0/build/../src/remote/remote_driver.c:6054:10
#10 0x75cd31241c8f in call /usr/src/debug/libvirt/libvirt-10.2.0/build/../src/remote/remote_driver.c:6076:12
#11 0x75cd31241c8f in remoteNetworkGetXMLDesc /usr/src/debug/libvirt/libvirt-10.2.0/build/src/remote/remote_client_bodies.h:5959:9
#12 0x75cd31410ff7 in virNetworkGetXMLDesc /usr/src/debug/libvirt/libvirt-10.2.0/build/../src/libvirt-network.c:952:15
The root cause is a bad assumption in the virNetClientIOEventLoop
method. This method is run by whichever thread currently owns the
buck, and is responsible for handling I/O. Inside a for(;;) loop,
this method creates a temporary GSource, adds it to the event loop
and runs g_main_loop_run(). When I/O is ready, the GSource callback
(virNetClientIOEventFD) will fire and call g_main_loop_quit(), and
return G_SOURCE_REMOVE which results in the temporary GSource being
destroyed. A g_autoptr() will then remove the last reference.
What was overlooked, is that a second thread can come along and
while it can't enter virNetClientIOEventLoop, it will register an
idle source that uses virNetClientIOWakeup to interrupt the
original thread's 'g_main_loop_run' call. When this happens the
virNetClientIOEventFD callback never runs, and so the temporary
GSource is not destroyed. The g_autoptr() will remove a reference,
but by virtue of still being attached to the event context, there
is an extra reference held causing GSource to be leaked. The
next time 'g_main_loop_run' is called, the original GSource will
trigger its callback, and access data that was allocated on the
stack by the previous thread, and likely SEGV.
To solve this, the thread calling 'g_main_loop_run' must call
g_source_destroy, immediately upon return, to guarantee that
the temporary GSource is removed.
CVE-2024-4418
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Martin Shirokov <shirokovmartin@gmail.com>
Tested-by: Martin Shirokov <shirokovmartin@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Allow generation of command line for virtio-sound-pci and virtio-sound-device
devices along with additional virtio options.
A new testcase is added to test virtio-sound-pci. The
arm-vexpressa9-virtio testcase is also extended to test virtio-sound-device.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds parsing of the virtio sound model, along with parsing
of virtio options and PCI/virtio-mmio address assignment.
A new 'streams' attribute is added for configuring number of PCM streams
(default is 2) in virtio sound devices. QEMU additionally has jacks and chmaps
parameters but these are currently stubbed, hence they are excluded in this
patch series.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This drops the CentOS 8 Stream distro target, since that is going EOL
at the end of May, at which point it will cease to be installable
due to package repos being archived.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This brings in a fix to the job rules which solves a problem with
jobs getting skipped in merge requests in some scenarios. It also
changes the way Cirrus CI vars are set, which involves a weak to
the way $PATH is set in build.yml.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When meson runs a dist script it sets both MESON_BUILD_ROOT and
MESON_DIST_ROOT envvars [1]. But for some reason, we took the
former as an argument and obtained the latter via env. Well,
obtain both via env.
1: https://mesonbuild.com/Reference-manual_builtin_meson.html#mesonadd_dist_script
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability can be used to detect if the qemu binary already
supports 'ras' feature for 'virt' machine type.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Refactor the existing logic using two nested loops with a jump into the
middle of both with 3 separate places fetching next token to a single
loop using a state machine with one centralized place to fetch next
tokens and add explanation comments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As we now have a centralized point to assign values to options move the
debugging logic there.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This check was needed due to the use "unsigned long long" as bitmap
which was refactored recently.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor the very old opaque logic (using multiple bitmaps) by
fully-allocating vshCmdOpt for each possible argument and then filling
them as they go rather than allocating them each time after it's parsed.
This simplifies the checkers and removes the need to cross-reference
multiple arrays.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Neither of them is used outside of vsh.c. 'vshCmddefSearch' needed to be
rearranged as it was called earlier in vsh.c than it was defined.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove the old helpers which were used previously to pick which field to
complete.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
