Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
The generated org.libvirt.api.policy.in file was recently added to the
POTFILES list as it contains translatable messages.
It is only generated when WITH_POLKIT && WITH_LIBVIRTD is satisfied
though, resulting in the 'po_check' syntax rule failing if either of
those conditions are not met.
It is harmless to unconditionally generate this file, as a separate
rule takes care of of installing it, and the latter remains under
the build conditions.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since we previously only supported vlan tagging for interfaces
connected to an OVS bridge [*], the code in qemuChangeNet() (used by
the update-device API) assumed an interface with modified vlan config
was on an OVS bridge, and would call the OVS-specific
virNetDevOpenvswitchUpdateVlan().
Now that we support vlan tagging for interfaces connected to a
standard Linux host bridge, we must check the type of connection and
only call the OVS function when connected to an OVS bridge *both
before and after the update*. Otherwise we just set the flag to
re-connect to the bridge, which has the side effect of redoing the
vlan setup.
([*] or an SRIOV VF assigned using VFIO, but we don't support *any
runtime changes to that type of netdev so it's irrelevant here.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Update domain XML and network XML documentation to describe how
standard linux bridges support the VLAN configuration.
Signed-off-by: Leigh Brown <leigh@solinno.co.uk>
Reviewed-by: Laine Stump <laine@redhat.com>
When we are deleting external snapshot that is not active we only need
to delete overlay disk image of the parent snapshot. This works
correctly even if parent snapshot is external and active as it will have
another overlay created when user reverted to that snapshot.
In case the parent snapshot is internal there are no overlay disk images
created as everything is stored internally within the disk image. In
this case we would delete the actual disk image storing internal
snapshots and most likely the original disk image as well resulting in
data loss once the VM is shutoff.
Fixes: https://gitlab.com/libvirt/libvirt/-/issues/734
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The host-model CPU mode was described as similar to copying the host CPU
definition from capabilities, which has not been the case for ages. The
host-model definition from domain capabilities is used instead.
Only the first sentence changed, but it required reformatting
essentially the whole paragraph so I used this as an opportunity to
reformat it a little bit more and split the long paragraph into several
smaller ones for better readability.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When VIR_INHIBITOR_WHAT_NONE is passed to virInhibitorNew, it is
an indication that daemon shutdown should be inhibited, but no
OS level inhibitors acquired. This is done by the virtnetworkd
daemon, for example, to prevent shutdown while running virtual
machines are present, without blocking / delaying OS shutdown.
Unfortunately the code forgot to skip the DBus call in this case,
resulting in errors being logged.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When debugging it is useful to know what signals are being received and
metadata related to them. Log this data before calling the signal
handling callbacks.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently translated at 100.0% (10555 of 10555 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/sv/
Signed-off-by: Anders Jonsson <anders.jonsson@norsjovallen.se>
Translated using Weblate (Swedish)
Currently translated at 100.0% (10555 of 10555 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/sv/
Signed-off-by: Anders Jonsson <anders.jonsson@norsjovallen.se>
Translated using Weblate (Swedish)
Currently translated at 100.0% (10555 of 10555 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/sv/
Signed-off-by: Anders Jonsson <anders.jonsson@norsjovallen.se>
Translated using Weblate (Swedish)
Currently translated at 100.0% (10555 of 10555 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/sv/
Signed-off-by: Anders Jonsson <anders.jonsson@norsjovallen.se>
Translated using Weblate (Swedish)
Currently translated at 100.0% (10555 of 10555 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/sv/
Signed-off-by: Anders Jonsson <anders.jonsson@norsjovallen.se>
Translated using Weblate (Swedish)
Currently translated at 100.0% (10555 of 10555 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/sv/
Signed-off-by: Anders Jonsson <anders.jonsson@norsjovallen.se>
Translated using Weblate (Swedish)
Currently translated at 100.0% (10555 of 10555 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/sv/
Signed-off-by: Anders Jonsson <anders.jonsson@norsjovallen.se>
Translated using Weblate (Swedish)
Currently translated at 100.0% (10555 of 10555 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/sv/
Signed-off-by: Anders Jonsson <anders.jonsson@norsjovallen.se>
Translated using Weblate (Swedish)
Currently translated at 100.0% (10555 of 10555 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/sv/
Signed-off-by: Anders Jonsson <anders.jonsson@norsjovallen.se>
GPU vendors are moving away from using mdev to create virtual GPUs
towards using SRIOV VFs that are vGPUs. In both cases, once created
the vGPUs are assigned to guests via <hostdev> (i.e. VFIO device
assignment), and inside the guest the devices look identical, but mdev
vGPUs are located by QEMU/VFIO using a uuid, while VF vGPUs are
located with a PCI address. So although we generally require the
device on the source host to exactly match the device on the
destination host, in the case of mdev-created vGPU vs. VF vGPU
migration *can* potentially work, except that libvirt has a hard-coded
check that prevents us from even trying.
This patch loosens up that check so that we will allow attempts to
migrate a guest from a source host that has mdev-created vGPUs to a
destination host that has VF vGPUs (and vice versa). The expectation
is that if this doesn't actually work then QEMU will fail and generate
an error that we can report.
Signed-off-by: Laine Stump <laine@redhat.com>
Tested-by: Zhiyi Guo <zhguo@redhat.com>
Reviewed-by: Zhiyi Guo <zhguo@redhat.com>
Adjust domain and network validation to permit vlan configuration on
standard linux bridges.
Update calls to virNetDevBridgeAddPort to pass the vlan configuration.
Signed-off-by: Leigh Brown <leigh@solinno.co.uk>
Reviewed-by: Laine Stump <laine@redhat.com>
Add virNetDevBridgeSetupVlans function to configure a bridge
interface using the passed virNetDevVlan struct.
Add virVlan parameter to the Linux version of virNetDevBridgeAddPort
and call virNetDevBridgeSetupVlans to set up the required vlan
configuration.
Update callers of virNetDevBridgeAddPort to pass NULL for now.
Signed-off-by: Leigh Brown <leigh@solinno.co.uk>
Reviewed-by: Laine Stump <laine@redhat.com>
Enable capability to add and remove vlan filters for a standard
linux bridge using netlink.
New function virNetlinkBridgeVlanFilterSet can be used to add or
remove a vlan filter to a given bridge interface.
Signed-off-by: Leigh Brown <leigh@solinno.co.uk>
Reviewed-by: Laine Stump <laine@redhat.com>
There is a common misconception when writing AppArmor policy that
[0-9]* applies * to the [0-9] class, but that's not the case. For this
example, [0-9]* matches a single digit followed by any number of
characters except for /
Create a UUID variable that uses the following format 8-4-4-4-12.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Moving towards full adoption of GLib APIs in the AppArmor code.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
proc and fd_path are allocated but never freed. Fix by using
g_autofree instead.
Fixes: b9757fea30785a92aa95ea675b9bc371e4fb2e8c
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Enabling building and packaging ch driver in the spec file.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Praveen K Paladugu <praveenkpaladugu@gmail.com>
Most of the impl for the 'daemon-set-timeout' command was ordered under
the heading for the 'daemon-log-filters' command.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The inhibitor constant values were off-by-1, so when converted into
string format, we picked the wrong names
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In commit dfa0e11 the last direct usage of devmapper for storage_disk was
removed. There is one stale include remaining, which is unused even longer
since df1011ca. Remove the include and change meson.build so we can use
storage_disk without devmapper.
I'm running it right now with a stripped-down config on a small arm64
router with openwrt.
Signed-off-by: Stefan Hellermann <stefan@the2masters.de>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 247357cc292a added support for direct and extended modes for
tlbflush, but forgot to do the formatting as well.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Add a nested buffer for whatever sub-elements a particular
hyperv feature might have.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Resolves: https://issues.redhat.com/browse/RHEL-72192
Signed-off-by: Adam Julis <ajulis@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The apparmor driver probe function checks for an active profile matching
the full path of the running daemon binary. If not found, it checks for
a profile named "libvirtd". This works fine when the running daemon is the
old monolithic libvirtd, but fails with modular daemons.
Remove the check for a hardcoded "libvirtd" profile and replace with the
basename of the running daemon binary.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The 'description' and 'message' fields in polkit policy files should be
translated into the user's chosen language. xgettext is told to search
in both and source and build dirs by meson.
Unfortunately a bug in xgettext means that when it searches for built
files in XML format, it'll trigger a warning message due to failure to
load the generated file from the source dir:
xgettext: cannot read ..snip../libvirt/src/access/org.libvirt.api.policy: failed to load external entity "..snip../libvirt/src/access/org.libvirt.api.policy"
This is harmless since it then goes on to try the build dir and
succeeds, but will pollute the output of 'ninja libvirt-pot'
Related: https://gitlab.com/libvirt/libvirt/-/merge_requests/387
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
xgettext / msgfmt have generic support for extracting / merging strings
in XML files, however, they need to be told something about the schema
to know which fields are translatable. This is done by providing 'its'
rules. Usually the 'its' rules would be shipped in a -devel package of
the app which owns the schema definition, but polkit does not do this.
Thus libvirt (and other apps) must ship their own local 'its' rules for
polkit.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When the vTPM source path is specified, such as:
<source type=".." path="/my/tpm"/>
Do not delete the parent directory, but only the given file/dir.
Fixes: commit f1304cc566 ("qemu_tpm: handle file/block storage source")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit bb5e26749fe5b ("qemu: explicit swtpm state locking") attempted to
lock the state, but only for swtpm-setup. The capability
"tpmstate-opt-lock" is actually only exposed by swtpm.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This reverts commit bb5e26749fe5b5856a3541be2cbe147701e6e121.
swtpm-setup doesn't have "tpmstate-lock", only swtpm.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In its upstream commit [1] openwsman dropped 'facility' variable
which is documented as:
* all processes that use the libu must define a "facility" variable somewhere
* to satisfy this external linkage reference.
*
* Such variable will be used as the syslog(3) facility argument.
Well, prior to that commit, openwsman itself declared the
variable (and set it to LOG_DAEMON). Now it's up to us.
Yeah, the variable naming is terrible and also I we are not using
libu directly, but apparently libwsman.so requires it anyway:
$ objdump -T /usr/lib64/libwsman.so | grep facility
0000000000000000 D *UND* 0000000000000000 Base facility
1: d72c51f21b
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Allows to load firmware in the qemu-efi-loongarch64 directory
Allows the binary qemu-system-loongarch64 to be run
This makes it possible to run loongarch64 VMs when AppArmor
is enabled
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
They require special handling since they are dependent on the basic
tlbflush feature itself and therefore are not handled automatically as
part of virDomainHyperv enum, just like the stimer-direct feature.
Resolves: https://issues.redhat.com/browse/RHEL-7122
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
