https://bugzilla.redhat.com/show_bug.cgi?id=1140981 reports that
the qemu-kvm shipped as part of RHEL 7.0 intentionally[1] cripples
block jobs by removing the 'block-stream' QMP command, while still
leaving 'block-job-cancel' as an unusable no-op. Meanwhile, we
already had existing code that checked whether block jobs were
completely missing (such as qemu 0.15), old style (cancel is
synchronous, and all commands spelled with '_'), or new style
(cancel is asynchronous, and all commands spelled with '-'), and
used that three-way probe to give decent error messages. At the
time that code was added, all existing qemu versions fell in one
of three buckets, and the code was using the presence of
'block-job-cancel' as the witness of which of the three buckets.
But now that RHEL qemu has shipped with intentionally crippled
'block-stream', we have a fourth bucket, which results in ugly
error messages when trying 'virsh blockpull':
error: Requested operation is not valid: Command 'block-stream' is not found
In reality, the fourth bucket should be treated the same as the
first bucket (no block job support); we can do that by realizing
that no existing build of qemu has working block-stream while
lacking block-job-cancel, so it is easiest to change our witness
to the command that starts a job rather than ends one. We still
act correctly regarding command spelling and whether cancel is
asynchronous. And on crippled RHEL builds, we now get the desired:
error: unsupported configuration: block jobs not supported with this qemu binary
[1] The intentional cripple is limited to qemu-kvm of RHEL; when using
qemu-kvm-rhev of RHEV, block job functionality is supported. Don't ask
me to explain the "why" behind it all - I'm just dealing with fallout
from someone else's decision.
* src/qemu/qemu_capabilities.h (QEMU_CAPS_BLOCKJOB_SYNC): Tweak comment.
* src/qemu/qemu_capabilities.c (virQEMUCapsCommands): Look for stream
rather than cancel when determining the flavor of block jobs supported.
Signed-off-by: Eric Blake <eblake@redhat.com>
Now that all offenders have been cleaned, turn on a syntax-check
rule to prevent future offenders.
* cfg.mk (sc_prohibit_static_zero_init): New rule.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Avoid false
positive.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1141621
As part of attach processing, assign the device aliases by calling
qemuAssignDeviceAliases during qemuDomainQemuAttach once all the devices
are found after the qemuParseCommandLinePid processing.
This will alleviate a symptom that caused a libvirtd crash during an
attempted device detach.
In qemuDomainDetachControllerDevice if the info.alias already exists
a call to qemuAssignDeviceControllerAlias would overwrite the existing
so avoid this possibility.
Not every error message from qemu-ga has to have the 'class' field
filled out. For instance, I've seen this error message lately:
qemuAgentCheckError:1047 : unable to execute QEMU agent command \
{"execute":"guest-set-time"}: \
{"error":{"desc":"Invalid parameter type, expected: integer"}}
However, this got translated into rather generic error message:
internal error: unable to execute QEMU agent command
'guest-set-time': unknown QEMU command error
So we've dropped better error message in favor of a generic one.
This is due to our code which expects 'class' which is not
present here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds functionality to processNicRxFilterChangedEvent().
The old and new multicast lists are compared and the filters in
the macvtap are programmed to match the guest's filters.
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=956506 documents that
given a domain where an internal snapshot parent has an external
snapshot child, we lacked a safety check when trying to use the
--children-only option to snapshot-delete:
$ virsh start dom
$ virsh snapshot-create-as dom internal
$ virsh snapshot-create-as dom external --disk-only
$ virsh snapshot-delete dom external
error: Failed to delete snapshot external
error: unsupported configuration: deletion of 1 external disk snapshots not supported yet
$ virsh snapshot-delete dom internal --children
error: Failed to delete snapshot internal
error: unsupported configuration: deletion of 1 external disk snapshots not supported yet
$ virsh snapshot-delete dom internal --children-only
Domain snapshot internal children deleted
While I'd still like to see patches that actually do proper external
snapshot deletion, we should at least fix the inconsistency in the
meantime. With this patch:
$ virsh snapshot-delete dom internal --children-only
error: Failed to delete snapshot internal
error: unsupported configuration: deletion of 1 external disk snapshots not supported yet
* src/qemu/qemu_driver.c (qemuDomainSnapshotDelete): Fix condition.
Signed-off-by: Eric Blake <eblake@redhat.com>
To prepare for introducing a single global driver, rename the
virDriver struct to virHypervisorDriver and the registration
API to virRegisterHypervisorDriver()
Tuning NUMA or network interface parameters requires root
privileges to manage cgroups. Thus an attempt to set some of these
parameters in session mode on a running domain should be invalid
followed by an error. An example might be memory tuning which raises
an error in such case.
The following behavior in session mode will be present after applying
this patch:
Tuning | SET | GET |
----------|---------------|--------|
NUMA | shut off only | always |
Memory | never | never |
Interface | never | always |
Resolves https://bugzilla.redhat.com/show_bug.cgi?id=1126762
The documentation for the restore hook states that returning an empty
XML is equivalent with copying the input. There was a bug in the code
checking the returned string by checking the string instead of the
contents. Use the new helper to check if the string is empty.
virt-manager on Fedora sets up i686 hosts with "/usr/bin/qemu-kvm" emulator,
which in turn unconditionally execs qemu-system-x86_64 querying capabilities
then fails:
Error launching details: invalid argument: architecture from emulator 'x86_64' doesn't match given architecture 'i686'
Traceback (most recent call last):
File "/usr/share/virt-manager/virtManager/engine.py", line 748, in _show_vm_helper
details = self._get_details_dialog(uri, vm.get_connkey())
File "/usr/share/virt-manager/virtManager/engine.py", line 726, in _get_details_dialog
obj = vmmDetails(conn.get_vm(connkey))
File "/usr/share/virt-manager/virtManager/details.py", line 399, in __init__
self.init_details()
File "/usr/share/virt-manager/virtManager/details.py", line 784, in init_details
domcaps = self.vm.get_domain_capabilities()
File "/usr/share/virt-manager/virtManager/domain.py", line 518, in get_domain_capabilities
self.get_xmlobj().os.machine, self.get_xmlobj().type)
File "/usr/lib/python2.7/site-packages/libvirt.py", line 3492, in getDomainCapabilities
if ret is None: raise libvirtError ('virConnectGetDomainCapabilities() failed', conn=self)
libvirtError: invalid argument: architecture from emulator 'x86_64' doesn't match given architecture 'i686'
Journal:
Oct 16 21:08:26 goatlord.localdomain libvirtd[1530]: invalid argument: architecture from emulator 'x86_64' doesn't match given architecture 'i686'
If VM is configured with many devices(including passthrough devices)
and large memory, libvirtd will take seconds(in the worst case) to
wait for monitor. In this period the qemu process may run on any
PCPU though I intend to pin emulator to the specified PCPU in xml
configuration.
Actually qemu process takes high cpu usage during vm startup.
So this is not the strict CPU isolation in this case.
Signed-off-by: Zhou yimin <zhouyimin@huawei.com>
To allow live modification of device backends in qemu libvirt needs to
be able to hot-add/remove "objects". Add monitor backend functions to
allow this.
This function will be used for hot-add/remove of RNG backends,
IOThreads, memory backing objects, etc.
Our qemu monitor code has a converter from key-value pairs to a json
value object. I want to re-use the code later and having it part of the
monitor command generator is inflexible. Split it out into a separate
helper.
When enabling the migration_address option, by default it is
set to "127.0.0.1", but it's not a valid address for migration.
so we should add verification and set the default migration_address
to "0.0.0.0".
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
if specifying migration_host to an Ipv6 address without brackets,
it was resolved to an incorrect address, such as:
tcp:2001:0DB8::1428:4444,
but the correct address should be:
tcp:[2001:0DB8::1428]:4444
so we should add brackets when parsing it.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
After set domain's numa parameters for running domain, save the change,
save the change into live xml is needed to survive restarting the libvirtd,
same story with bug 1146511; meanwihle add call
qemuDomainObjBeginJob/qemuDomainObjEndJob in qemuDomainSetNumaParameters
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
After set the blkio parameters for running domain, save the change into
live xml is needed to survive restarting the libvirtd, same story with
bug 1146511, meanwhile add call qemuDomainObjBeginJob/qemuDomainObjEndJob
in qemuDomainSetBlkioParameters
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
This patch fills in the functionality of
processNicRxFilterChangedEvent(). It now checks if it is appropriate
to respond to the NIC_RX_FILTER_CHANGED event (based on device type
and configuration) and takes appropriate action. Currently it checks
if the guest interface has been configured with
trustGuestRxFilters='yes', and if the host side device is macvtap. If
so, and the MAC address on the guest has changed, the MAC address of
the macvtap device is changed to match.
The result of this is that networking from the guest will continue to
work if the mac address of a macvtap-connected network device is
changed from within the guest, as long as trustGuestRxFilters='yes'
(previously changing the MAC address in the guest would break
networking).
NIC_RX_FILTER_CHANGED is sent by qemu any time a NIC driver in the
guest modified the NIC's RX Filter (for example, if the MAC address of
the NIC is changed by the guest).
This patch doesn't do anything useful with that event; it just sets up
all the plumbing to get news of the event into a worker thread with
all proper locking/reference counting, and provide an easy place to
add in desired functionality.
See src/qemu/EVENTHANDLERS.txt for information/instructions on adding
a libvirt-internal handler for a qemu event (using
NIC_RX_FILTER_CHANGED as an example).
This text was in the commit log for the patch that added the event
handler for NIC_RX_FILTER_CHANGED, and John Ferlan expressed a desire
that the information not be "lost", so I've put it into a file in the
qemu directory, hoping that it might catch the attention of future
writers of handlers for qemu events.
This function can be called at any time to get the current status of a
guest's network device rx-filter. In particular it is useful to call
after libvirt recieves a NIC_RX_FILTER_CHANGED event - this event only
tells you that something has changed in the rx-filter, the details are
retrieved with the query-rx-filter monitor command (only available in
the json monitor). The command sent to the qemu monitor looks like this:
{"execute":"query-rx-filter", "arguments": {"name":"net2"} }'
and the results will look something like this:
{
"return": [
{
"promiscuous": false,
"name": "net2",
"main-mac": "52:54:00:98:2d:e3",
"unicast": "normal",
"vlan": "normal",
"vlan-table": [
42,
0
],
"unicast-table": [
],
"multicast": "normal",
"multicast-overflow": false,
"unicast-overflow": false,
"multicast-table": [
"33:33:ff:98:2d:e3",
"01:80:c2:00:00:21",
"01:00:5e:00:00:fb",
"33:33:ff:98:2d:e2",
"01:00:5e:00:00:01",
"33:33:00:00:00:01"
],
"broadcast-allowed": false
}
],
"id": "libvirt-14"
}
This is all parsed from JSON into a virNetDevRxFilter object for
easier consumption. (unicast-table is usually empty, but is also an
array of mac addresses similar to multicast-table).
(NB: LIBNL_CFLAGS was added to tests/Makefile.am because virnetdev.h
now includes util/virnetlink.h, which includes netlink/msg.h when
appropriate. Without LIBNL_CFLAGS, gcc can't find that file (if
libnl/netlink isn't available, LIBNL_CFLAGS will be empty and
virnetlink.h won't try to include netlink/msg.h anyway).)
Prior patch removed the need for the virConnectPtr in the unplug
detach host path which caused ripple effect to remove in multiple
callers. The previous patch just left things as ATTRIBUTE_UNUSED -
this patch will remove the variable.
https://bugzilla.redhat.com/show_bug.cgi?id=1141732
Introduced by commit id '8f76ad99' the logic to detach a scsi_host
device (SCSI or iSCSI) fails when attempting to remove the 'drive'
because as I found in my investigation - the DelDevice takes care of
that for us.
The investigation turned up commits to adjust the logic for the
qemuMonitorDelDevice and qemuMonitorDriveDel processing for interfaces
(commit id '81f76598'), disk bus=VIRTIO,SCSI,USB (commit id '0635785b'),
and chr devices (commit id '55b21f9b'), but nothing with the host devices.
This commit uses the model for the previous set of changes and applies
it to the hostdev path. The call to qemuDomainDetachHostSCSIDevice will
return to qemuDomainDetachThisHostDevice handling either the audit of
the failure or the wait for the removal and then call into
qemuDomainRemoveHostDevice for the event, removal from the domain hostdev
list, and audit of the removal similar to other paths.
NOTE: For now the 'conn' param to +qemuDomainDetachHostSCSIDevice is left
as ATTRIBUTE_UNUSED. Removing requires a cascade of other changes to be
left for a future patch.
This patch implements support for the ivshmem device in QEMU.
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Ivshmem is supported by QEMU since 0.13 release.
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch adds parsing/formatting code as well as documentation for
shared memory devices. This will currently be only accessible in QEMU
using it's ivshmem device, but is designed as generic as possible to
allow future expansion for other hypervisors.
In the devices section in the domain XML users may specify:
- For shmem device using a server:
<shmem name='shmem0'>
<server path='/tmp/socket-ivshmem0'/>
<size unit='M'>32</size>
<msi vectors='32' ioeventfd='on'/>
</shmem>
- For ivshmem device not using an ivshmem server:
<shmem name='shmem1'>
<size unit='M'>32</size>
</shmem>
Most of the configuration is made optional so it also allows
specifications like:
<shmem name='shmem1/>
<shmem name='shmem2'>
<server/>
</shmem>
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Aeons ago (commit 34dcbbb4, v0.8.2), we added a new libvirt event
(VIR_DOMAIN_EVENT_ID_IO_ERROR_REASON) in order to tell the user WHY
the guest halted. This is because at least VDSM wants to react
differently to ENOSPC events (resize the lvm partition to be larger,
and resume the guest as if nothing had happened) from all other events
(I/O is hosed, throw up our hands and flag things as broken). At the
time this was done, downstream RHEL qemu added a vendor extension
'__com.redhat_reason', which would be exactly one of these strings:
"enospc", "eperm", "eio", and "eother". In our stupidity, we exposed
those exact strings to clients, rather than an enum, and we also
return "" if we did not have access to a reason (which was the case
for upstream qemu).
Fast forward to now: upstream qemu commit c7c2ff0c (will be qemu 2.2)
FINALLY adds a 'nospace' boolean, after discussion with multiple
projects determined that VDSM really doesn't care about distinction
between any other error types. So this patch converts 'nospace' into
the string "enospc" for compatibility with RHEL clients that were
already used to the downstream extension, while leaving the reason
blank for all other cases (no change from the status quo).
See also https://bugzilla.redhat.com/show_bug.cgi?id=1119784
* src/qemu/qemu_monitor_json.c (qewmuMonitorJSONHandleIOError):
Parse reason field from modern qemu.
* include/libvirt/libvirt.h.in
(virConnectDomainEventIOErrorReasonCallback): Document it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Right now when building the qemu command line, we try to do various
unconditional validations of the guest CPU against the host CPU. However
this checks are overly applied. The only time we should use the checks
are:
- The user requests host-model/host-passthrough, or
- When KVM is requsted. CPU features requested in TCG mode are always
emulated by qemu and are independent of the host CPU, so no host CPU
checks should be performed.
Right now if trying to specify a CPU for arm on an x86 host, it attempts
to do non-sensical validation and falls over.
Switch all the test cases that were intending to test CPU validation to
use KVM, so they continue to test the intended code.
Amend some aarch64 XML tests with a CPU model, to ensure things work
correctly.
check domain's status before call virQEMUCapsGet to report a accurate
error when domain is shut off
Resolve: https://bugzilla.redhat.com/show_bug.cgi?id=1147847
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
Up until now, we set memballoon period in monitor successfully, however
we did not update domain definition structure, thus dumpxml was omitting
period attribute in memballoon element
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140960
When trying to update bandwidth limits on a running domain, limits get
updated in our internal structures, however XML parser reads
bandwidth limits from network 'actual' definition. Committing this patch
it is now available to update bandwidth 'actual' definition as well,
thus updating domain runtime XML.
If we don't properly clean up all processes in the
machine-<vmname>.scope systemd won't remove the cgroup and subsequent vm
starts fail with
'CreateMachine: File exists'
Additional processes can e.g. be added via
echo $PID > /sys/fs/cgroup/systemd/machine.slice/machine-${VMNAME}.scope/tasks
but there are other cases like
http://bugs.debian.org/761521
Invoke TerminateMachine to be on the safe side since systemd tracks the
cgroup anyway. This is a noop if all processes have terminated already.
Management software wants to be able to allocate disk space on demand.
To support this they need keep track of the space occupation of the
block device. This information is reported by qemu as part of block
stats.
This patch extend the block information in the bulk stats with the
allocation information.
To keep the same behaviour a helper is extracted from
qemuMonitorJSONGetBlockExtent in order to get per-device allocation
information.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
While our code gathers block stats via "query-blockstats" some
information need to be gathered via "query-block". Add a helper function
that will update the blockstats structure if requested.
This removes the artificial and unnecessary restriction that
virDomainSetMaxDowntime() only be called while a migration is in
progress.
https://bugzilla.redhat.com/show_bug.cgi?id=1146618
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The current block stats code matched up the disk name with the actual
stats by the order in the data returned from qemu. This unfortunately
isn't right as qemu may return the disks in any order. Fix this by
returning a hash of stats and index them by the disk alias.
Commit fba6bc4 introduced the non-migratable invtsc feature,
breaking save/migration with host-model and host-passthrough.
On hosts with this feature present it was automatically included
in the CPU definition, regardless of QEMU support.
Commit de0aeaf stopped including it by default for host-model,
but failed to fix host-passthrough.
This commit ignores checking of CPU features with host-passthrough,
since we don't pass them to QEMU (only -cpu host is passed),
allowing domains using host-passthrough that were saved with
the broken version of libvirtd to be restored.
https://bugzilla.redhat.com/show_bug.cgi?id=1147584
For the new VIR_DOMAIN_EVENT_ID_TUNABLE event we have a bunch of
constants added
VIR_DOMAIN_EVENT_CPUTUNE_<blah>
VIR_DOMAIN_EVENT_BLKDEVIOTUNE_<blah>
This naming convention is bad for two reasons
- There is no common prefix unique for the events to both
relate them, and distinguish them from other event
constants
- The values associated with the constants were chosen
to match the names used with virConnectGetAllDomainStats
so having EVENT in the constant name is not applicable in
that respect
This patch proposes renaming the constants to
VIR_DOMAIN_TUNABLE_CPU_<blah>
VIR_DOMAIN_TUNABLE_BLKDEV_<blah>
ie, given them a common VIR_DOMAIN_TUNABLE prefix.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
On a domain startup, the variable store path is generated if needed.
The path is intended to be generated only once. However, the updated
domain definition is not saved into config dir rather than state XML
only. So later, whenever the domain is destroyed and the daemon is
restarted, the generated path is forgotten and the file may be left
behind on virDomainUndefine() call.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since 363e9a68 we track backing chain metadata when creating snapshots
the right way even for the inactive configuration. As we did not yet
update other code paths that modify the backing chain (blockpull) the
newDef backing chain gets out of sync.
After stopping of a VM the new definition gets copied to the next start
one. The new VM then has incorrect backing chain info. This patch
switches the backing chain detector to always purge the existing backing
chain and forces re-detection to avoid this issue until we'll have full
backing chain tracking support.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1144922
Use the universal tunable event to report changes to user. All
blkdeviotune values are prefixed with "blkdeviotune".
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When you updated some blkdeviotune values for running domain the values
were stored only internally, but not saved into the live XML so they
won't survive restarting the libvirtd.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Request erroring out from the backing chain traveller and drop qemu's
internal backing chain integrity tester.
The backing chain traveller reports errors by itself with possibly more
detail than qemuDiskChainCheckBroken ever could.
We also need to make sure that we reconnect to existing qemu instances
even at the cost of losing the backing chain info (this really should be
stored in the XML rather than reloaded from disk, but that needs some
work).
Add a new parameter to virStorageFileGetMetadata that will break the
backing chain detection process and report useful error message rather
than having to use virStorageFileChainGetBroken.
This patch just introduces the option, usage will be provided
separately.
Now we have universal tunable event so we can use it for reporting
changes to user. The cputune values will be prefixed with "cputune" to
distinguish it from other tunable events.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In the function at one place we check if def->cpu is NULL prior
to accessing def->cpu->ncells. Then, later in the code,
def->cpu->ncells is accessed directly, without the check. This
makes coverity unhappy, because the first check makes it think
def->cpu can be NULL. However, the function is not called if
def->cpu is NULL. Therefore, remove the first check and hopefully
make coverity cheer again.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
RDMA Live migration requires registering memory with the hardware, and
thus QEMU offers a new 'capability' to pre-register / mlock() the guest
memory in advance for higher RDMA performance before the migration
begins. This capability is disabled by default, which means QEMU will
register the memory with the hardware in an on-demand basis.
This patch exposes this capability with the following example usage:
virsh migrate --live --rdma-pin-all --migrateuri rdma://hostname domain qemu+ssh://hostname/system
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch adds support for RDMA protocol in migration URIs.
USAGE: $ virsh migrate --live --migrateuri rdma://hostname domain qemu+ssh://hostname/system
Since libvirt runs QEMU in a pretty restricted environment, several
files needs to be added to cgroup_device_acl (in qemu.conf) for QEMU to
be able to access the host's infiniband hardware. Full documenation of
the feature can be found on QEMU wiki:
http://wiki.qemu.org/Features/RDMALiveMigration
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Currently we only support TCP protocol for native QEMU migration but
this is going to be changed. Let's make the code more general and remove
hardcoded TCP protocol from several places.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
For compatibility with old libvirt we need to support both tcp:host and
tcp://host migration URIs. Let's make the code that parses them a bit
cleaner.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
RDMA migration uses the 'setup' state in QEMU to optionally lock
all memory before the migration starts. The total time spent in
this state is exposed as VIR_DOMAIN_JOB_SETUP_TIME.
Additionally, QEMU also exports migration throughput (mbps) for both
memory and disk, so let's add them too: VIR_DOMAIN_JOB_MEMORY_BPS,
VIR_DOMAIN_JOB_DISK_BPS.
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
commit 72f919f558 introduced an user
friendly error message when trying to use IDE disks as readonly.
Do the same thing for the SATA bus.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1112939
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Add a new parameter that will allow to return the XML stored in the save
image for further manipulation and adjust the callers. This option will
be used in later patches.
Commit id '9a2f36ec' added a build conditional of CAP_SYS_RAWIO
in order to determine whether or not a disk definition using rawio
should be allowed on platforms without CAP_SYS_RAWIO. If one was
found, virReportError was used but the code didn't goto cleanup.
This patch adds the goto.
We are not detecting the presence of FIPS from QEMU, but from procfs and
that means it's not QEMU capability. It was decided that we will pass
this flag to QEMU even if it's not supported by old QEMU binaries.
This patch also reverts changes done by commit a21cfb0f to
qemucapabilitestest and implements a new test case in qemuxml2argvtest.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1135431
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If the qemu being used doesn't support JSON, then querying for IOThread
data would fail. In that case, ensure the *iothreads is NULL and return 0
as the count of iothreads available.
Currently, build with clang fails with:
CC qemu/libvirt_driver_qemu_impl_la-qemu_command.lo
qemu/qemu_command.c:6580:58: error: implicit conversion from enumeration type
'virMemAccess' to different enumeration type 'virTristateSwitch'
[-Werror,-Wenum-conversion]
virTristateSwitch memAccess = def->cpu->cells[i].memAccess;
~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~^~~~~~~~~
1 error generated.
Fix that by using virMemAccess instead of virTristateSwitch.
Commit f05b6a91 added virQEMUDriverConfigPtr argument to the
virQEMUCapsFillDomainCaps function and it uses forward declaration
of virQEMUDriverConfig and virQEMUDriverConfigPtr that casues clang
build to fail:
gmake[3]: Entering directory `/usr/home/novel/code/libvirt/src'
CC qemu/libvirt_driver_qemu_impl_la-qemu_capabilities.lo
In file included from qemu/qemu_capabilities.c:43:
In file included from qemu/qemu_hostdev.h:27:
qemu/qemu_conf.h:63:37: error: redefinition of typedef 'virQEMUDriverConfig'
is a C11 feature [-Werror,-Wtypedef-redefinition]
typedef struct _virQEMUDriverConfig virQEMUDriverConfig;
^
qemu/qemu_capabilities.h:328:37: note: previous definition is here
typedef struct _virQEMUDriverConfig virQEMUDriverConfig;
^
Fix that by passing loader and nloader config attributes directly
instead of passing complete config.
Commit f36a94f introduced a double free on all success paths
in qemuSharedDeviceEntryInsert.
Only call qemuSharedDeviceEntryFree on the error path and
set entry to NULL before jumping there if the entry already
is in the hash table.
https://bugzilla.redhat.com/show_bug.cgi?id=1142722
Clean up all _virDomainMemoryStat.
Signed-off-by: James <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Clean up all _virDomainBlockStats.
Signed-off-by: James <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Clean up all _virDomainInterfaceStats.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Live definition was used to look up the disk index while persistent one
was indexed leading to a crash in qemuDomainGetBlockIoTune. Use the
correct def and report a nice error.
Unfortunately it's accessible via read-only connection, though it can
only crash libvirtd in the cases where the guest is hot-plugging disks
without reflecting those changes to the persistent definition. So
avoiding hotplug, or doing hotplug where persistent is always modified
alongside live definition, will avoid the out-of-bounds access.
Introduced in: eca96694a7f992be633d48d5ca03cedc9bbc3c9aa (v0.9.8)
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140724
Reported-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1135396
There are two ways how to tell qemu to use huge pages. The first one
is suitable for domains with NUMA nodes: the path to hugetlbfs mount
is appended to NUMA node definition on the command line. The second
one is suitable for UMA domains: here there's this global '-mem-path'
argument that accepts path to the hugetlbfs mount point. However, the
latter case was not used for all the cases that it should be. For
instance:
<memoryBacking>
<hugepages>
<page size='2048' unit='KiB' nodeset='0'/>
</hugepages>
</memoryBacking>
didn't trigger the '-mem-path' so the huge pages - despite being
configured - were not used at all.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As of 136ad4974 it is possible to specify different huge pages per
guest NUMA node. However, there's no check if nodeset specified in
./hugepages/page contains only those guest NUMA nodes that exist.
In other words with current code it is possible to define meaningless
combination:
<memoryBacking>
<hugepages>
<page size='1048576' unit='KiB' nodeset='0,2-3'/>
<page size='2048' unit='KiB' nodeset='1,4'/>
</hugepages>
</memoryBacking>
<vcpu placement='static'>4</vcpu>
<cpu>
<numa>
<cell id='0' cpus='0' memory='1048576'/>
<cell id='1' cpus='1' memory='1048576'/>
<cell id='2' cpus='2' memory='1048576'/>
<cell id='3' cpus='3' memory='1048576'/>
</numa>
</cpu>
Notice the node 4 in <hugepages/>?
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch implements the VIR_DOMAIN_STATS_BLOCK group of statistics.
To do so, a helper function to get the block stats of all the disks of
a domain is added.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This patch implements the VIR_DOMAIN_STATS_INTERFACE group of
statistics.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This patch implements the VIR_DOMAIN_STATS_VCPU group of statistics. To
do so, this patch also extracts a helper to gather the vCPU information.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This patch implements the VIR_DOMAIN_STATS_CPU_TOTAL group of
statistics.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Future patches which will implement more bulk stats groups for QEMU will
need to access the connection object.
To accommodate that, a few changes are needed:
* enrich internal prototype to pass qemu driver object
* add per-group flag to mark if one collector needs monitor access or not
* If at least one collector of the requested stats needs monitor access
we must start a query job for each domain. The specific collectors
will run nested monitor jobs inside that.
* If the job can't be acquired we pass flags to the collector so
specific collectors that need monitor access can be skipped in order
to gather as much data as is possible.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Check to see if the UEFI binary mentioned in qemu.conf actually
exists, and if so expose it in domcapabilities like
<loader ...>
<value>/path/to/ovmf</value>
</loader>
We introduce some generic domcaps infrastructure for handling
a dynamic list of string values, it may be of use for future bits.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Up till now the virQEMUCapsFillDomainCaps() was type of void as
there was no way for it to fail. This is, however, going to
change in the next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
qemu for IBM Power processor architecture is adding functionality for
supporting multiple 'pseries' machine type versions, each with different
capabilities. This patch is for supporting the same
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
As of 542899168c we learned libvirt to use UEFI for domains.
However, management applications may firstly query if libvirt
supports it. And this is where virConnectGetDomainCapabilities()
API comes handy.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit b606bbb4 broke reporting of errors when setting of guest time
fails via the guest agent as the return value is not checked and later
overwritten by the return value qemuMonitorRTCResetReinjection();
Fix this by checking the return value before resetting the RTC
reinjection.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1142294
If there are no iothreads, then return from qemuProcessDetectIOThreadPIDs
without error; otherwise, the following occurs:
error: Failed to start domain $dom
error: An error occurred, but the cause is unknown
Modify qemuProcessStart() in order to allowing setting affinity to
specific CPU's for IOThreads. The process followed is similar to
that for the vCPU's.
This involves adding a function to fetch the IOThread id's via
qemuMonitorGetIOThreads() and adding them to iothreadpids[] list.
Then making sure all the cgroup data has been properly set up and
finally assigning affinity.
In order to support cpuset setting, introduce qemuSetupCgroupIOThreadsPin
and qemuSetupCgroupForIOThreads to mimic the existing Vcpu API's.
These will support having an 'iotrhreadpin' element in the 'cpuset' in
order to pin named IOThreads to specific CPU's. The IOThread pin names
will follow the IOThread naming scheme starting at 1 (eg "iothread1")
up through an including the def->iothreads value.
Coverity complains about the calculation of the buf & len within
the PROBE macro. So to quiet things down, do the calculation prior
to usage in either write() or qemuMonitorIOWriteWithFD() calls and
then have the PROBE use the calculated values - which works.
We stupidly modeled block job bandwidth after migration
bandwidth, which in turn was an 'unsigned long' and therefore
subject to 32-bit vs. 64-bit interpretations. To work around
the fact that 10-gigabit interfaces are possible but don't fit
within 32 bits, the original interface took the number scaled
as MiB/sec. But this scaling is rather coarse, and it might
be nice to tune bandwidth finer than in megabyte chunks.
Several of the block job calls that can set speed are fed
through a common interface, so it was easier to adjust them all
at once. Note that there is intentionally no flag for the new
virDomainBlockCopy; there, since the API already uses a 64-bit
type always, instead of a possible 32-bit type, and is brand
new, it was easier to just avoid scaling issues. As with the
previous patch that adjusted the query side (commit db33cc24),
omitting the new flag preserves old behavior, and the
documentation now mentions limits of what happens when a 32-bit
machine is on either client or server side.
* include/libvirt/libvirt.h.in (virDomainBlockJobSetSpeedFlags)
(virDomainBlockPullFlags)
(VIR_DOMAIN_BLOCK_REBASE_BANDWIDTH_BYTES)
(VIR_DOMAIN_BLOCK_COMMIT_BANDWIDTH_BYTES): New enums.
* src/libvirt.c (virDomainBlockJobSetSpeed, virDomainBlockPull)
(virDomainBlockRebase, virDomainBlockCommit): Document them.
* src/qemu/qemu_driver.c (qemuDomainBlockJobSetSpeed)
(qemuDomainBlockPull, qemuDomainBlockRebase)
(qemuDomainBlockCommit, qemuDomainBlockJobImpl): Support new flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
Upstream qemu 1.4 added some drive-mirror tunables not present
when it was first introduced in 1.3. Management apps may want
to set these in some cases (for example, without tuning
granularity down to sector size, a copy may end up occupying
more bytes than the original because an entire cluster is
copied even when only a sector within the cluster is dirty,
although tuning it down results in more CPU time to do the
copy). I haven't personally needed to use the parameters, but
since they exist, and since the new API supports virTypedParams,
we might as well expose them.
Since the tuning parameters aren't often used, and omitted from
the QMP command when unspecified, I think it is safe to rely on
qemu 1.3 to issue an error about them being unsupported, rather
than trying to create a new capability bit in libvirt.
Meanwhile, all versions of qemu from 1.4 to 2.1 have a bug where
a bad granularity (such as non-power-of-2) gives a poor message:
error: internal error: unable to execute QEMU command 'drive-mirror': Invalid parameter 'drive-virtio-disk0'
because of abuse of QERR_INVALID_PARAMETER (which is supposed to
name the parameter that was given a bad value, rather than the
value passed to some other parameter). I don't see that a
capability check will help, so we'll just live with it (and it
has since been improved in upstream qemu).
* src/qemu/qemu_monitor.h (qemuMonitorDriveMirror): Add
parameters.
* src/qemu/qemu_monitor.c (qemuMonitorDriveMirror): Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDriveMirror):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDriveMirror):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockCopyCommon): Likewise.
(qemuDomainBlockRebase, qemuDomainBlockCopy): Adjust callers.
* src/qemu/qemu_migration.c (qemuMigrationDriveMirror): Likewise.
* tests/qemumonitorjsontest.c (qemuMonitorJSONDriveMirror): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The hard part of managing the disk copy is already coded; all
this had to do was convert the XML and virTypedParameters into
the internal representation.
With this patch, all blockcopy operations that used the old
API should also work via the new API. Additional extensions,
such as supporting the granularity tunable or a network rather
than file destination, will be added as later patches.
* src/qemu/qemu_driver.c (qemuDomainBlockCopy): New function.
Signed-off-by: Eric Blake <eblake@redhat.com>
In order to implement the new virDomainBlockCopy, the existing
block copy internal implementation needs to be adjusted. The
new function will parse XML into a storage source, and parse
typed parameters into integers, then call into the same common
backend. For now, it's easier to keep the same implementation
limits that only local file destinations are suported, but now
the check needs to be explicit. Similar to qemuDomainBlockJobImpl
consuming 'vm', this code also consumes the caller's 'mirror'
description of the destination.
* src/qemu/qemu_driver.c (qemuDomainBlockCopy): Rename...
(qemuDomainBlockCopyCommon): ...and adjust parameters.
(qemuDomainBlockRebase): Adjust caller.
Signed-off-by: Eric Blake <eblake@redhat.com>
When a domain is undefined, there are options to remove it's
managed save state or snapshots. However, there's another file
that libvirt creates per domain: the NVRAM variable store file.
Make sure that the file is not left behind if the domain is
undefined.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If we end up at the cleanup lable before we've VIR_EXPAND_N the list,
then calling virQEMUCapsFreeStringList() with a NULL proplist could
theoretically deref proplist if nproplist was set. Coverity doesn't
seem to acknowledge the relationship between proplist and nproplist
assuming in virQEMUCapsFreeStringList that nproplist could be at
least 1 and thus have a null deref. It only seems to follow the
NULL proplist.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Test suites using the port allocator don't want to have different
behaviour depending on whether a port is in use on the host. Add
a VIR_PORT_ALLOCATOR_SKIP_BIND_CHECK which test suites can use
to skip the bind() test. The port allocator will thus only track
ports in use by the test suite process itself. This is fine when
using the port allocator to generate guest configs which won't
actually be launched
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Coverity notes that if the virConnectListAllDomains returns a negative
value then the loop at the cleanup label that ends on numDomains will
have issues.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Coverity notes that if qemuMonitorGetMachines() returns a negative
nmachines value, then the code at the cleanup label will have issues.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In qemuProcessInitPCIAddresses() if qemuMonitorGetAllPCIAddresses()
returns a negative (or zero) value, then no need to call the
qemuProcessDetectPCIAddresses().
Signed-off-by: John Ferlan <jferlan@redhat.com>
If the qemuMigrationEatCookie() fails to set mig, we jump to cleanup:
which will call qemuMigrationCancelDriveMirror() without first checking
if mig == NULL
Signed-off-by: John Ferlan <jferlan@redhat.com>
If we jump to cleanup before allocating the 'result', then the call
to virBlkioDeviceArrayClear will deref result causing a problem.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If the virJSONValueNewObject() fails, then rather than going to error
and getting a Coverity false positive since it doesn't seem to understand
the relationship between nkeywords, keywords, and values and seems to
believe calling qemuFreeKeywords will cause a NULL deref - just return NULL
Signed-off-by: John Ferlan <jferlan@redhat.com>
Coverity complains that checking for !domlist after setting doms = domlist
and making a deref of doms just above
It seems the call in question was intended to me made in the case that
'doms' was passed in and not when the virDomainObjListExport() call
allocated domlist and already called virConnectGetAllDomainStatsCheckACL().
Thus rather than check for !domlist - check that "doms != domlist" in
order to avoid the Coverity message.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In qemuDomainSetBlkioParameters(), Coverity points out that the calls
to qemuDomainParseBlkioDeviceStr() are slightly different and points
out there may be a cut-n-paste error.
In the first call (AFFECT_LIVE), the second parameter is "param->field";
however, for the second call (AFFECT_CONFIG), the second parameter is
"params->field". It seems the "param->field" is correct especially since
each path as a setting of "param" to "¶ms[i]". Furthermore, there
were a few more instances of using "params[i]" instead of "param->"
which I cleaned up.
Signed-off-by: John Ferlan <jferlan@redhat.com>
When using split UEFI image, it may come handy if libvirt manages per
domain _VARS file automatically. While the _CODE file is RO and can be
shared among multiple domains, you certainly don't want to do that on
the _VARS file. This latter one needs to be per domain. So at the
domain startup process, if it's determined that domain needs _VARS
file it's copied from this master _VARS file. The location of the
master file is configurable in qemu.conf.
Temporary, on per domain basis the location of master NVRAM file can
be overridden by this @template attribute I'm inventing to the
<nvram/> element. All it does is holding path to the master NVRAM file
from which local copy is created. If that's the case, the map in
qemu.conf is not consulted.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
QEMU now supports UEFI with the following command line:
-drive file=/usr/share/OVMF/OVMF_CODE.fd,if=pflash,format=raw,unit=0,readonly=on \
-drive file=/usr/share/OVMF/OVMF_VARS.fd,if=pflash,format=raw,unit=1 \
where the first line reflects <loader> and the second one <nvram>.
Moreover, these two lines obsolete the -bios argument.
Note that UEFI is unusable without ACPI. This is handled properly now.
Among with this extension, the variable file is expected to be
writable and hence we need security drivers to label it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Up to now, users can configure BIOS via the <loader/> element. With
the upcoming implementation of UEFI this is not enough as BIOS and
UEFI are conceptually different. For instance, while BIOS is ROM, UEFI
is programmable flash (although all writes to code section are
denied). Therefore we need new attribute @type which will
differentiate the two. Then, new attribute @readonly is introduced to
reflect the fact that some images are RO.
Moreover, the OVMF (which is going to be used mostly), works in two
modes:
1) Code and UEFI variable store is mixed in one file.
2) Code and UEFI variable store is separated in two files
The latter has advantage of updating the UEFI code without losing the
configuration. However, in order to represent the latter case we need
yet another XML element: <nvram/>. Currently, it has no additional
attributes, it's just a bare element containing path to the variable
store file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After the previous commit, migration statistics on the source and
destination hosts are not equal because the destination updated time
statistics. Let's send the result back so that the same data can be
queried on both sides of the migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Total time of a migration and total downtime transfered from a source to
a destination host do not count with the transfer time to the
destination host and with the time elapsed before guest CPUs are
resumed. Thus, source libvirtd remembers when migration started and when
guest CPUs were paused. Both timestamps are transferred to destination
libvirtd which uses them to compute total migration time and total
downtime. Obviously, this requires the time to be synchronized between
the two hosts. The reported times are useless otherwise but they would
be equally useless if we didn't do this recomputation so don't lose
anything by doing it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When migrating a transient domain or with VIR_MIGRATE_UNDEFINE_SOURCE
flag, the domain may disappear from source host. And so will migration
statistics associated with the domain. We need to transfer the
statistics at the end of a migration so that they can be queried at the
destination host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virDomainGetJobStats gains new VIR_DOMAIN_JOB_STATS_COMPLETED flag that
can be used to fetch statistics of a completed job rather than a
currently running job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Job statistics data were tracked in several structures and variables.
Let's make a new qemuDomainJobInfo structure which can be used as a
single source of statistics data as a preparation for storing data about
completed a job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemu now checks for invalid address type for a panic device, which is
currently implemented only to use ISA address type, thus rejecting
any other options, except for leaving XML attributes blank, in that case,
defaults are used (this behaviour remains the same from earlier verions).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1138125
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When QEMU fails during incoming migration after we successfully started
it (i.e., during Perform or Finish phase), we report a rather unhelpful
message
Unable to read from monitor: Connection reset by peer
We already have a code that takes error messages from QEMU's error
output but we disable it once QEMU successfully starts. This patch
postpones this until the end of Finish phase during incoming migration
so that we can report a much better error message:
internal error: early end of file from monitor: possible problem:
Unknown savevm section or instance '0000:00:05.0/virtio-balloon' 0
load of migration failed
https://bugzilla.redhat.com/show_bug.cgi?id=1090093
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Return failure right away when the domain object can't be looked up
instead of jumping to cleanup. This allows to remove the condition
before unlocking the domain object.
The code would lookup the snapshot object before acquiring the job. This
could lead to a crash as one thread could delete the snapshot object,
while a second thread already had the reference.
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Creating snapshots modifies the domain state. Currently we wouldn't
enter the job for certain operations although they would modify the
state. Refactor job handling so that everything is covered by an async
job.
To date, anyone performing a block copy and pivot ends up with
the destination being treated as <disk type='file'>. While this
works for data access for a block device, it has at least one
noticeable shortcoming: virDomainGetBlockInfo() reports allocation
differently for block devices visited as files (the size of the
device) than for block devices visited as <disk type='block'>
(the maximum sector used, as reported by qemu); and this difference
is significant when trying to manage qcow2 format on block devices
that can be grown as needed.
Of course, the more powerful virDomainBlockCopy() API can already
express the ability to set the <disk> type. But a new API can't
be backported, while a new flag to an existing API can; and it is
also rather inconvenient to have to resort to the full power of
generating XML when just adding a flag to the older call will do
the trick. So this patch enhances blockcopy to let the user flag
when the resulting XML after the copy must list the device as
type='block'.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_REBASE_COPY_DEV):
New flag.
* src/libvirt.c (virDomainBlockRebase): Document it.
* tools/virsh-domain.c (opts_block_copy, blockJobImpl): Add
--blockdev option.
* tools/virsh.pod (blockcopy): Document it.
* src/qemu/qemu_driver.c (qemuDomainBlockRebase): Allow new flag.
(qemuDomainBlockCopy): Remember the flag, and make sure it is only
used on actual block devices.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
While reviewing the new virDomainBlockCopy API, Peter Krempa
pointed out that our existing design of using MiB/s for block
job bandwidth is rather coarse, especially since qemu tracks
it in bytes/s; so virDomainBlockCopy only accepts bytes/s.
But once the new API is implemented for qemu, we will be in
the situation where it is possible to set a value that cannot
be accurately reflected back to the user, because the existing
virDomainGetBlockJobInfo defaults to the coarser units.
Fortunately, we have an escape hatch; and one that has already
served us well in the past: we can use the flags argument to
specify which scale to use (see virDomainBlockResize for prior
art). This patch fixes the query side of the API; made easier
by previous patches that split the query side out from the
modification code. Later patches will address the virsh
interface, as well retrofitting all other blockjob APIs to
also accept a flag for toggling bandwidth units.
* include/libvirt/libvirt.h.in (_virDomainBlockJobInfo)
(VIR_DOMAIN_BLOCK_COPY_BANDWIDTH): Document sizing issues.
(virDomainBlockJobInfoFlags): New enum.
* src/libvirt.c (virDomainGetBlockJobInfo): Document new flag.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJobInfo): Add parameter.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJobInfo): Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockJobInfo):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJobInfo)
(qemuMonitorJSONGetBlockJobInfoOne): Likewise. Don't scale here.
* src/qemu/qemu_migration.c (qemuMigrationDriveMirror): Update
callers.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl): Likewise.
(qemuDomainGetBlockJobInfo): Likewise, and support new flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
The previous patch hoisted some bounds checks to the callers;
but someone that is not aware of the hoisted check could now
try passing an integer between LLONG_MAX and ULLONG_MAX. As a
safety measure, add new json conversion modes that let libvirt
error out early instead of pass bad numbers to qemu, if the
caller ever makes a mistake due to later refactoring.
Convert the various blockjob QMP calls to use the new modes,
and switch some of them to be optional (QMP has always supported
an omitted "speed" the same as "speed":0, for everything except
block-job-set-speed).
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONMakeCommandRaw):
Add 'j'/'y' and 'J'/'Y' to error out on negative input.
(qemuMonitorJSONDriveMirror, qemuMonitorJSONBlockCommit)
(qemuMonitorJSONBlockJob): Use it.
Signed-off-by: Eric Blake <eblake@redhat.com>
qemu treats blockjob bandwidth as a 64-bit number, in the units
of bytes/second. But we stupidly modeled block job bandwidth
after migration bandwidth, which in turn was an 'unsigned long'
and therefore subject to 32-bit vs. 64-bit interpretations, and
with a scale of MiB/s. Our code already has to convert between
the two scales, and report overflow as appropriate; although
this conversion currently lives in the monitor code. In fact,
our conversion code limited things to 63 bits, because we
checked against LLONG_MAX and reject what would be negative
bandwidth if treated as signed.
On the bright side, our use of MiB/s means that even with a
32-bit unsigned long, we still have no problem representing a
bandwidth of 2GiB/s, which is starting to be more feasible as
10-gigabit or even faster interfaces are used. And once you
get past the physical speeds of existing interfaces, any larger
bandwidth number behaves the same - effectively unlimited.
But on the low side, the granularity of 1MiB/s tuning is rather
coarse. So the new virDomainBlockJob API decided to go with
a direct 64-bit bytes/sec number instead of the scaled number
that prior blockjob APIs had used. But there is no point in
rounding this number to MiB/s just to scale it back to bytes/s
for handing to qemu.
In order to make future code sharing possible between the old
virDomainBlockRebase and the new virDomainBlockCopy, this patch
moves the scaling and overflow detection into the driver code.
Several of the block job calls that can set speed are fed
through a common interface, so it was easier to adjust all block
jobs at once, for consistency. This patch is just code motion;
there should be no user-visible change in behavior.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJob)
(qemuMonitorBlockCommit, qemuMonitorDriveMirror): Change
parameter type and scale.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob)
(qemuMonitorBlockCommit, qemuMonitorDriveMirror): Move scaling
and overflow detection...
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl)
(qemuDomainBlockRebase, qemuDomainBlockCommit): ...here.
(qemuDomainBlockCopy): Use bytes/sec.
Signed-off-by: Eric Blake <eblake@redhat.com>
Another layer of overly-multiplexed code that deserves to be
split into obviously separate paths for query vs. modify.
This continues the cleanup started in commit cefe0ba.
In the process, make some tweaks to simplify the logic when
parsing the JSON reply. There should be no user-visible
semantic changes.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJob): Drop parameter.
(qemuMonitorBlockJobInfo): New prototype.
(BLOCK_JOB_INFO): Drop enum.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockJob)
(qemuMonitorJSONBlockJobInfo): Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Split...
(qemuMonitorBlockJobInfo): ...into second function.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJob): Move
block info portions...
(qemuMonitorJSONGetBlockJobInfo): ...here, and rename...
(qemuMonitorJSONBlockJobInfo): ...and export.
(qemuMonitorJSONGetBlockJobInfoOne): Alter return semantics.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl, qemuDomainGetBlockJobInfo): Adjust
callers.
* src/qemu/qemu_migration.c (qemuMigrationDriveMirror)
(qemuMigrationCancelDriveMirror): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The qemu implementation for virDomainGetBlockJobInfo() has a
minor bug: it grabs the qemu job with intent to QEMU_JOB_MODIFY,
which means it cannot be run in parallel with any other
domain-modifying command. Among others, virDomainBlockJobAbort()
is such a modifying command, and it defaults to being
synchronous, and can wait as long as several seconds to ensure
that the job has actually finished. Due to the job rules, this
means a user cannot obtain status about the job during that
timeframe, even though we know that some client management code
exists which is using a polling loop on status to see when a job
finishes.
This bug has been present ever since blockpull support was first
introduced (commit b976165, v0.9.4 in Jul 2011), all because we
stupidly tried to cram too much multiplexing through a single
helper routine, but was made worse in 97c59b9 (v1.2.7) when
BlockJobAbort was fixed to wait longer. It's time to disentangle
some of the mess in qemuDomainBlockJobImpl, and in the process
relax block job query to use QEMU_JOB_QUERY, since it can safely
be used in parallel with any long running modify command.
Technically, there is one case where getting block job info can
modify domain XML - we do snooping to see if a 2-phase job has
transitioned into the second phase, for an optimization in the
case of old qemu that lacked an event for the transition. I
claim this optimization is safe (the jobs are all about modifying
qemu state, not necessarily xml state); but if it proves to be
a problem, we could use the difference between the capabilities
QEMU_CAPS_BLOCKJOB_{ASYNC,SYNC} to determine whether we even
need snooping, and only request a modifying job in the case of
older qemu.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Move info
handling...
(qemuDomainGetBlockJobInfo): ...here, and relax job type.
(qemuDomainBlockJobAbort, qemuDomainBlockJobSetSpeed)
(qemuDomainBlockRebase, qemuDomainBlockPull): Adjust callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
The existing virDomainBlockRebase code rejected the combination of
_RELATIVE and _COPY flags, but only by accident. It makes sense
to add support for the combination someday, at least for the case
of _SHALLOW and not _REUSE_EXT; but to implement it, libvirt would
have to pre-create the file with a relative backing name, and I'm
not ready to code that in yet.
Meanwhile, the code to forward on to the block copy code is getting
longer, and reorganizing the function to have the block pull done
early makes it easier to add even more block copy prep code.
This patch should have no semantic difference other than the quality
of the error message on the unsupported flag combination. Pre-patch:
error: unsupported flags (0x10) in function qemuDomainBlockCopy
Post-patch:
error: argument unsupported: Relative backing during copy not supported yet
* src/qemu/qemu_driver.c (qemuDomainBlockRebase): Reorder code,
and improve error message of relative copy.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add umask to _virCommand, allow user to set umask to command.
Set umask(002) to qemu process to overwrite the default umask
of 022 set by many distros, so that unix sockets created for
virtio-serial has expected permissions.
Fix problem reported here:
https://sourceware.org/bugzilla/show_bug.cgi?id=13078#c11https://bugzilla.novell.com/show_bug.cgi?id=888166
To use virtio-serial device, unix socket created for chardev with
default umask(022) has insufficient permissions.
e.g.:
-device virtio-serial \
-chardev socket,path=/tmp/foo,server,nowait,id=foo \
-device virtserialport,chardev=foo,name=org.fedoraproject.port.0
srwxr-xr-x 1 qemu qemu 0 21. Jul 14:19 /tmp/somefile.sock
Other users in the same group (like real user, test engines, etc)
cannot write to this socket.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, there is one flag passed in during macvtap creation
(withTap) -- Let's convert this field to an unsigned int flag
field for future expansion.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In qemuDomainSnapshotCreateDiskActive() if we jumped to cleanup from a
failed actions = virJSONValueNewArray(), then 'cfg' would be NULL.
So just return -1, which in turn removes the need for cleanup:
For virtio-blk-pci disks with the disk iothread attribute that are
running the correct emulator, add the "iothread=iothread#" to the
-device command line in order to enable iothreads for the disk as
long as the command is available, the disk iothread value provided is
valid, and is supported for the disk device being added
Add a new capability to ensure the iothreads feature exists for the qemu
emulator being run - requires the "query-iothreads" QMP command. Using the
domain XML add correspoding command argument in order to generate the
threads. The iothreads will use a name space "iothread#" where, the
future patch to add support for using an iothread to a disk definition to
merely define which of the available threads to use.
Add tests to ensure the xml/argv processing is correct. Note that no
change was made to qemuargv2xmltest.c as processing the -object element
would require knowing more than just iothreads.
Implement the API function for virDomainListGetStats and
virConnectGetAllDomainStats in a modular way and implement the
VIR_DOMAIN_STATS_STATE group of statistics.
Although it may look like the function looks universal I'd rather not
expose it to other drivers as the coming stats groups are likely to do
qemu specific stuff to obtain the stats.
One useless warning, but the other one rather pertinent. On entry
the 'trans' variable is initialized to VIR_DOMAIN_DISK_TRANS_DEFAULT.
When the "trans" was found in the parsing loop it def->geometry.trans
was assigned to the return from virDomainDiskGeometryTransTypeFromString
and then 'trans' was used to do the comparison to see if it was valid.
So remove 'trans' and use def->geometry.trans properly
Coverity determined that on error path that 'mach' wouldn't be free'd
Since virCapabilitiesFreeGuestMachine() isn't globally available, we'll
insert first and then if the VIR_STRDUP's fail they it will eventually
cause the 'mach' to be freed in the error path
Coverity found that on error paths, the 'arg' value wasn't be cleaned
up. Followed the example in qemuAgentSetVCPUs() where upon successful call
to qemuAgentCommand() the 'cpus' is set to NULL; otherwise, when cleanup
occurs the free the memory for 'arg'
In function virQEMUCapsParseMachineTypesStr, VIR_STRNDUP allocates
memory for 'name' in {do,while} loop. If 'name' isn't freed before
'continue', its memory will be allocated again in the next loop.
In this case the memory allocated for 'name' in privious loop is
useless and not freed. Free it before continue this loop to fix that.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
In qemuNetworkIfaceConnect() a call to virNetDevBandwidthSet() is
made where the function prototype requires the first parameter
(net->ifname) to be non NULL. Coverity complains that the subsequent
non NULL check for net->ifname prior to the next call gets flagged as
an unnecessary check. Resolve by removing the extra check
In qemuDomainRevertToSnapshot(), it will check snap->def->state.
But when the state is PMSUSPENDED/NOSTATE/BLOCKED, it forgets to
call qemuDomainObjEndJob.
https://bugzilla.redhat.com/show_bug.cgi?id=1134154
Bug introduced in commit 1e833899.
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Let's fix this before we bake in a painful API. Since we know
that we have exactly one non-negative fd on success, we might
as well return the fd directly instead of forcing the user to
pass in a pointer. Furthermore, I found some memory and fd
leaks while reviewing the code - the idea is that on success,
libvirtd will have handed two fds in two different directions:
one to qemu, and one to the RPC client.
* include/libvirt/libvirt.h.in (virDomainOpenGraphicsFD): Drop
unneeded parameter.
* src/driver.h (virDrvDomainOpenGraphicsFD): Likewise.
* src/libvirt.c (virDomainOpenGraphicsFD): Adjust interface to
return fd directly.
* daemon/remote.c (remoteDispatchDomainOpenGraphicsFd): Adjust
semantics.
* src/qemu/qemu_driver.c (qemuDomainOpenGraphicsFD): Likewise,
and plug fd leak.
* src/remote/remote_driver.c (remoteDomainOpenGraphicsFD):
Likewise, and plug memory and fd leak.
Signed-off-by: Eric Blake <eblake@redhat.com>
According to docs/schemas/domaincommon.rng and _virDomainBlockIoTuneInfo
all the iotune values are interpreted as unsigned long long, however
according to qemu_monitor_json.c, qemu silently truncates numbers
larger than LLONG_MAX. There's really not much of a usage for such
large numbers anyway yet. This patch provides the same overflow
check during a domain start as it does during setting
a blkdeviotune element in qemu_driver.c and thus reports an error when
a larger number than LLONG_MAX is detected.
https://bugzilla.redhat.com/show_bug.cgi?id=1131876
QEMU 2.1 added support for the kvm=off option to the -cpu command,
allowing the KVM hypervisor signature to be hidden from the guest.
This enables disabling of some paravirualization features in the
guest as well as allowing certain drivers which test for the
hypervisor to load. Domain XML syntax is as follows:
<domain type='kvm>
...
<features>
...
<kvm>
<hidden state='on'/>
</kvm>
</features>
...
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Commit b606bbb41 reminded me that any time we drop locks to run
back-to-back guest interaction commands, we have to check that
the guest didn't disappear in between the two commands. A quick
audit found a couple of spots that were missing this check.
* src/qemu/qemu_driver.c (qemuDomainShutdownFlags)
(qemuDomainSetVcpusFlags): Check that domain is still up.
Signed-off-by: Eric Blake <eblake@redhat.com>
The 'min_guarantee' is used by VMware ESX and OpenVZ drivers,
with qemu however, libvirt should report error when starting a domain,
because this element is not used.
Resolves https://bugzilla.redhat.com/show_bug.cgi?id=1122455
On some places in the libvirt code we have:
f(a,z)
instead of
f(a, z)
This trivial patch fixes couple of such occurrences.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1078126
Using 'virsh attach-device --config' (or --persistent) to attach a
file backed lun device will succeed; however, subsequent domain restarts
will result in failure because the configuration of a file backed lun
is not supported.
Although allowing 'illegal configurations' is something that can be
allowed, it may not be practical in this case. Generally, when attaching
a device to a domain means the domain must be running. A way around
this is using the --config (or --persistent) option. When an attach
is done to a running domain, a temporary configuration is modified
first followed by the live update. The live update will make a number
of disk validity checks when building the qemu command to attach the
disk. If any fail, then change is rejected.
Rather than allow a potentially illegal combination, adjust the code
in the configuration path to make the same checks as the running path
will make with respect to disk validity checks. This way we avoid
having the potential for some subsequent start/reboot to fail because
an illegal combination was allowed.
NB: The live path still checks the configuration since it is possible
to just do --live guest modification...
https://bugzilla.redhat.com/show_bug.cgi?id=1103245
An advice appeared there on the qemu-devel list [1]. When a domain is
suspended and then resumed guest kernel is not aware of this. So we've
introduced virDomainSetTime API that resets the time within guest
using qemu-ga. On the other hand, qemu itself is trying to make RTC
beat faster to catch the difference. But if we don't tell qemu that
guest's time was reset via the other method, both mechanisms are
applied resulting in again wrong guest time. In order to avoid summing
both corrections we need to tell qemu that it should not use the RTC
injection if the guest time is set via guest agent.
1: http://www.mail-archive.com/qemu-devel@nongnu.org/msg236435.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When a user would try changing the persistent IO tuning settings for a
disk that was hotplugged to a vm in a transient way, the
qemuDomainSetBlockIoTune API would use the same index for both the
live and config disk array. The disk was missing from the config array
though causing a crash of libvirtd.
To fix the issue, determine the indexes separately.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1131819
https://bugzilla.redhat.com/show_bug.cgi?id=1095636
When starting up the domain the domain's NICs are allocated. As of
1f24f682 (v1.0.6) we are able to use multiqueue feature on virtio
NICs. It breaks network processing into multiple queues which can be
processed in parallel by different host CPUs. The queues are, however,
created by opening /dev/net/tun several times. Unfortunately, only the
first FD in the row is labelled so when turning the multiqueue feature
on in the guest, qemu will get AVC denial. Make sure we label all the
FDs needed.
Moreover, the default label of /dev/net/tun doesn't allow
attaching a queue:
type=AVC msg=audit(1399622478.790:893): avc: denied { attach_queue }
for pid=7585 comm="qemu-kvm"
scontext=system_u:system_r:svirt_t:s0:c638,c877
tcontext=system_u:system_r:virtd_t:s0-s0:c0.c1023
tclass=tun_socket
And as suggested by SELinux maintainers, the tun FD should be labeled
as svirt_t. Therefore, we don't need to adjust any range (as done
previously by Guannan in ae368ebf) rather set the seclabel of the
domain directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Removing a shared device needs special steps for disks and hostdevs.
Instead of having one function dealing this split the code into two
separate functions that can be used with better granularity.
Adding a shared device needs special steps for disks and hostdevs.
Instead of having one function dealing this split the code into two
separate functions that can be used with better granularity.
The qemuCheckSharedDevice function is operating only on disk devices.
Rename it and change the arguments to reflect that and refactor some
logic for more readability.
Split it out into a separate function and simplify the code. There's no
need to copy the entry to update it as the hash returns pointer to the
existing item.
Also remove the now unused qemuSharedDeviceEntryCopy function.
To allow reuse split the code into a separate function and refactor it.
To update an existing entry there's no need to copy it first, just
update it inplace.
Pass the source of the changed media instead of a complete disk
definition.
Note that the @disk argument now contains what @olddisk would contain.
The new source is passed as a virStorageSource struct.
When we are changing media (or doing other hotplug operations) we need
to setup cgroups, locking and seclabels on the new disk. This is a
multi-step process where every piece can fail. To simplify dealing with
this introduce qemuDomainPrepareDisk that similarly to
qemuDomainPrepareDiskChainElement initializes/tears down a whole new
disk to be used with the domain.
Additionally the function supports passing a different source struct for
media changes of cdroms that will be refactored later.
Currently, qemu driver uses qemuTranslateDiskSourcePool()
to translate disk volume information. This function is
general enough and could be used for other drivers as well,
so move it to conf/domain_conf.c along with its helpers.
- qemuTranslateDiskSourcePool: move to storage/storage_driver.c
and rename to virStorageTranslateDiskSourcePool,
- qemuAddISCSIPoolSourceHost: move to storage/storage_driver.c
and rename to virStorageAddISCSIPoolSourceHost,
- qemuTranslateDiskSourcePoolAuth: move to storage/storage_driver.c
and rename to virStorageTranslateDiskSourcePoolAuth,
- Update users of qemuTranslateDiskSourcePool to use a
new name.
In commit 45ad1adb I added a nicer message for tunings that need
cgroups when unavailable (unprivileged), but I added this check for
I/O tuning of block devices, which doesn't need cgroups, because it is
done by QEMU, so let's fix that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Pin existing vcpus rather than existing vcpu pinning infos. This
increases the complexity of the lookup, but avoids pinning cpus that are
not enabled actually.
Remove the pinning info when removing to CPU, otherwise when the VM will
be started our code will try to pin non-existing vcpus as the definition
wasn't updated.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1129372
When editing guest's XML (on QEMU), it was possible to add multiple
listen elements into graphics parent element. However QEMU does not
support listening on multiple addresses. Configuration is tested for
multiple 'listen address' and if positive, an error is raised.
https://bugzilla.redhat.com/show_bug.cgi?id=1119212
During a QEMU live migration several warning messages about job
handling could be written to syslog on the destination host:
"entering monitor without asking for a nested job is dangerous"
The messages are written because the job handling during migration
uses hard coded asyncJob values in several places that are incorrect.
This patch passes the required asyncJob value around and prevents
the warnings as well as any issues that the warnings may be referring
to.
https://bugzilla.redhat.com/show_bug.cgi?id=1130089
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
At the beginning of the qemu config file parsing function there
are 3 helper macros defined: GET_VALUE_BOOL, GET_VALUE_LONG and
GET_VALUE_STR. Later, when they are no longer needed they are
undefined in order to keep the namespace clean. However, the
GET_VALUE_STRING is undefined instead of GET_VALUE_STR.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Implement ZFS storage backend driver. Currently supported
only on FreeBSD because of ZFS limitations on Linux.
Features supported:
- pool-start, pool-stop
- pool-info
- vol-list
- vol-create / vol-delete
Pool definition looks like that:
<pool type='zfs'>
<name>myzfspool</name>
<source>
<name>actualpoolname</name>
</source>
</pool>
The 'actualpoolname' value is a name of the pool on the system,
such as shown by 'zpool list' command. Target makes no sense
here because volumes path is always /dev/zvol/$poolname/$volname.
User has to create a pool on his own, this driver doesn't
support pool creation currently.
A volume could be used with Qemu by adding an entry like this:
<disk type='volume' device='disk'>
<driver name='qemu' type='raw'/>
<source pool='myzfspool' volume='vol5'/>
<target dev='hdc' bus='ide'/>
</disk>
In qemuMigrationToFile we enter the monitor multiple times and don't
check if the VM is still alive after returning form the monitor. Add the
checks to skip pieces of code in case the VM crashes while saving it's
state.
Saving a shutoff VM doesn't make sense and libvirtd crashes while
attempting to do that. Check that the domain is alive after entering
the save async job.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1129207
A command to freeze a part of mounted file systems is implemented in
upstream QEMU-guest-agent with a name of 'guest-fsfreeze-freeze-list'.
This fixes the name of the command used to partial fsfreeze in qemu driver
when 'mountpoints' option is specified to virDomainFSFreeze API.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
The virDomainSetInterfaceParameters implementation in qemu over
VIR_DOMAIN_AFFECT_CONFIG doesn't work as expected. When trying to
clear out the bandwidth settings for an interface, it has no
actual effect:
virsh # domiftune --config $domain $interface
inbound.average: 100
inbound.peak : 0
inbound.burst : 0
outbound.average: 10
outbound.peak : 0
outbound.burst : 0
virsh domiftune --config $domain $interface 0 0
virsh # domiftune --config $domain $interface
inbound.average: 100
inbound.peak : 0
inbound.burst : 0
outbound.average: 10
outbound.peak : 0
outbound.burst : 0
But according to virsh man page:
To clear inbound or outbound settings, use --inbound or
--outbound respectfully with average value of zero.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
During review of the iSCSI hostdev series, eblake noted that the
prototypes shouldn't have the extranenous space between the "*" and
the function name:
http://www.redhat.com/archives/libvir-list/2014-July/msg01227.html
Since it was more invasive than 1 or 2 lines - I said I'd send a
patch covering this once committed.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit febf84c2 tried to delay in-memory modification of the actual
domain disk structure until after the qemu event was received.
However, I missed that the code for block pivot had been temporarily
setting disk->src = disk->mirror prior to the qemu command, in order
to label the backing chain of a reused external blockcopy disk;
and calls into qemu while still in that state before finally undoing
things at the cleanup label. Since the qemu event handler then does:
virStorageSourceFree(disk->src);
disk->src = disk->mirror;
we have the sad race that a fast enough qemu event can cause a leak of
the original disk->src, as well as a use-after-free of the disk->mirror
contents, bad enough to crash libvirtd in some of my test runs, even
though the common case of the qemu event being much later won't trip
the race.
I'll go wear the brown paper bag of shame, for introducing a crasher
in between rc1 and rc2 of the freeze for 1.2.7 :( My only
consolation is that virDomainBlockJobAbort requires the domain:write
ACL, so it is not a CVE.
The valgrind report when the race occurs looks like:
==25612== Invalid read of size 4
==25612== at 0x50E7C90: virStorageSourceGetActualType (virstoragefile.c:1948)
==25612== by 0x209C0B18: qemuDomainDetermineDiskChain (qemu_domain.c:2473)
==25612== by 0x209D7F6A: qemuProcessHandleBlockJob (qemu_process.c:1087)
==25612== by 0x209F40C9: qemuMonitorEmitBlockJob (qemu_monitor.c:1357)
...
==25612== Address 0xe4b5610 is 0 bytes inside a block of size 200 free'd
==25612== at 0x4A07577: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==25612== by 0x50839E9: virFree (viralloc.c:582)
==25612== by 0x50E7E51: virStorageSourceFree (virstoragefile.c:2015)
==25612== by 0x209D7EFF: qemuProcessHandleBlockJob (qemu_process.c:1073)
==25612== by 0x209F40C9: qemuMonitorEmitBlockJob (qemu_monitor.c:1357)
* src/qemu/qemu_driver.c (qemuDomainBlockPivot): Don't corrupt
disk->src, and only label chain for blockcopy.
Signed-off-by: Eric Blake <eblake@redhat.com>
Fix a comment in virDomainAuditNetDevice.
Fix a typo in comment of qemuPhysIfaceConnect which is
the caller of virDomainAuditNetDevice.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Commit 232a31b munged job info to report 'active commit' instead of
'commit' when generating events, but forgot to also munge the polling
variant of the command.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Adjust type as
needed.
Signed-off-by: Eric Blake <eblake@redhat.com>
Otherwise this beautiful error would be overwritten when
the function is called with a really high rate number:
2014-07-28 12:51:47.920+0000: 2304: error : virCommandWait:2399 :
internal error: Child process (/sbin/tc class add dev vnet0 parent 1:
classid 1:1 htb rate 4294968kbps) unexpected exit status 1: Illegal "rate"
Usage: ... qdisc add ... htb [default N] [r2q N]
default minor id of class to which unclassified packets are sent {0}
r2q DRR quantums are computed as rate in Bps/r2q {10}
debug string of 16 numbers each 0-3 {0}
... class add ... htb rate R1 [burst B1] [mpu B] [overhead O]
[prio P] [slot S] [pslot PS]
[ceil R2] [cburst B2] [mtu MTU] [quantum Q]
rate rate allocated to this class (class can still borrow)
burst max bytes burst which can be accumulated during idle period {computed}
mpu minimum packet size used in rate computations
overhead per-packet size overhead used in rate computations
linklay adapting to a linklayer e.g. atm
ceil definite upper class rate (no borrows) {rate}
cburst burst but for ceil {computed}
mtu max packet size we create rate map for {1600}
prio priority of leaf; lowe
https://bugzilla.redhat.com/show_bug.cgi?id=1043735
There are multiple mount points after commit 725a211f, but one comment
wasn't changed to use plurals.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
With this in place, I can (finally!) now do:
virsh blockcommit $dom vda --shallow --verbose --pivot
and watch qemu shorten the backing chain by one, followed by
libvirt automatically updating the dumpxml output, effectively
undoing the work of virsh snapshot-commit --no-metadata --disk-only.
Commit is SOOOO much faster than blockpull, when I'm still fairly
close in time to when the temporary qcow2 wrapper file was created
via a snapshot operation!
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Implement live
commit.
Signed-off-by: Eric Blake <eblake@redhat.com>
A future patch is going to wire up qemu active block commit jobs;
but as they have similar events and are canceled/pivoted in the
same way as block copy jobs, it is easiest to track all bookkeeping
for the commit job by reusing the <mirror> element. This patch
adds domain XML to track which job was responsible for creating a
mirroring situation, and adds a job='copy' attribute to all
existing uses of <mirror>. Along the way, it also massages the
qemu monitor backend to read the new field in order to generate
the correct type of libvirt job (even though it requires a
future patch to actually cause a qemu event that can be reported
as an active commit). It also prepares to update persistent XML
to match changes made to live XML when a copy completes.
* docs/schemas/domaincommon.rng: Enhance schema.
* docs/formatdomain.html.in: Document it.
* src/conf/domain_conf.h (_virDomainDiskDef): Add a field.
* src/conf/domain_conf.c (virDomainBlockJobType): String conversion.
(virDomainDiskDefParseXML): Parse job type.
(virDomainDiskDefFormat): Output job type.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Distinguish
active from regular commit.
* src/qemu/qemu_driver.c (qemuDomainBlockCopy): Set job type.
(qemuDomainBlockPivot, qemuDomainBlockJobImpl): Clean up job type
on completion.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old.xml:
Update tests.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-disk-active-commit.xml: New
file.
* tests/qemuxml2xmltest.c (mymain): Drive new test.
Signed-off-by: Eric Blake <eblake@redhat.com>
We were not directly saving the domain XML to file after starting
or finishing a blockcopy. Without the startup write, a libvirtd
restart in the middle of a copy job would forget that the job was
underway. Then at pivot, we were indirectly writing new XML in
reaction to events that occur as we stop and restart the guest CPUs.
But there was a race: since pivot is an async action, it is possible
that libvirtd is restarted before the pivot completes, so if XML
changes during the event, that change was not written. The original
blockcopy code cleared out the <mirror> element prior to restarting
the CPUs, but this is also a race, observed if a user does an async
pivot and a dumpxml before the event occurs. Furthermore, this race
will interfere with active commit in a future patch, because that
code will rely on the <mirror> element at the time of the qemu event
to determine whether to inform the user of a normal commit or an
active commit.
Fix things by saving state any time we modify live XML, while
delaying XML disk modifications until after the event completes. We
still need a to teach libvirtd restarts to examine all existing
<mirror> elements to see if the job completed in the meantime (that
is, if libvirtd misses the event, the updated state still needs to be
updated in live XML), but that will be a later patch, in part because
we also need to to start taking advantage of newer qemu's ability to
keep the job around after completion rather than the current usage
where the job disappears both on error and on success.
* src/qemu/qemu_driver.c (qemuDomainBlockCopy): Track XML change
on disk.
(qemuDomainBlockJobImpl, qemuDomainBlockPivot): Move job-end XML
rewrites...
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): ...here.
Signed-off-by: Eric Blake <eblake@redhat.com>
Doing a blockcopy operation across a libvirtd restart is not very
robust at the moment. In particular, we are clearing the <mirror>
element prior to telling qemu to finish the job. Also, thanks to the
ability to request async completion, the user can easily regain
control prior to qemu actually finishing the effort, and they should
be able to poll the domain XML to see if the job is still going.
A future patch will fix things to actually wait until qemu is done
before modifying the XML to reflect the job completion. But since
qemu issues identical BLOCK_JOB_COMPLETE events regardless of whether
the job was cancelled (kept the original disk) or completed (pivoted
to the new disk), we have to track which of the two operations were
used to end the job. Furthermore, we'd like to avoid attempts to
end a job where we are already waiting on an earlier request to qemu
to end the job. Likewise, if we miss the qemu event (perhaps because
it arrived during a libvirtd restart), we still need enough state
recorded to be able to determine how to modify the domain XML once
we reconnect to qemu and manually learn whether the job still exists.
Although this patch doesn't actually fix the problem, it is a
preliminary step that makes it possible to track whether a job
has already begun steps towards completion.
* src/conf/domain_conf.h (virDomainDiskMirrorState): New enum.
(_virDomainDiskDef): Convert bool mirroring to new enum.
* src/conf/domain_conf.c (virDomainDiskDefParseXML)
(virDomainDiskDefFormat): Handle new values.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Adjust
client.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl): Likewise.
* docs/schemas/domaincommon.rng (diskMirror): Expose new values.
* docs/formatdomain.html.in (elementsDisks): Document it.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
If PCI passthrough type is not supported, we should error out rather than
continue building the command line.
When starting a domain, the type has been already checked by
qemuPrepareHostdevPCICheckSupport() before building qemu command line,
so the problem doesn't emerge.
But when coverting a domain xml without specifying passthrough type explictly
to qemu arg, we will get a malformed command line.
the xml:
<hostdev mode='subsystem' type='pci' managed='yes'>
<source>
<address domain='0x0001' bus='0x03' slot='0x00' function='0x0'/>
</source>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</hostdev>
the converted command line:
-device ,host=0001:03:00.0,id=hostdev0,bus=pci.0,addr=0x5
After this patch, virsh gives an error message:
virsh domxml-to-native qemu-argv /tmp/tmp.xml
error: internal error: invalid PCI passthrough type 'default'
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Use better detection of hugetlbfs mount points. Yes, there can be
multiple mount points each serving different huge page size.
Since we already have ability to override the mount point in the
qemu.conf file, this crazy backward compatibility code is brought in.
Now we allow multiple mount points, so the "hugetlbfs_mount" option
must take an list of strings (mount points). But previously, it was
just a string, so we must accept both types now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit e5f36698e3 introduces a
false-positive build failure in the sound card model handling switch.
Initialize the model to NULL although the value should never be used.
Libvirt documents that the default entropy source for the 'random'
backend of a RNG device is /dev/random. Instead of storing and
propagating NULL across our code and checking it in multiple places fill
the default in the post parse callback and use that in the other places.
Since 24e5cafba6 (thankfully unreleased)
when a VM with an empty disk drive would be started the code would call
stat() on NULL path as a check was missing from the callback rendering
machines unstartable.
Report success when the path is empty (denoting an empty drive).
The "random" backend for virtio-rng can be started with no path
specified which equals to /dev/random. The cgroup code didn't consider
this and called few of the functions with NULL resulting into:
$ virsh start rng-vm
error: Failed to start domain rng-vm
error: Path '(null)' is not accessible: Bad address
Problem introduced by commit c6320d3463
If user hasn't provided any @emulatorbin, the qemuCaps are
searched by @arch provided (which in fact can be guessed from the
host). However, there's no guarantee that the qemu binary for
@arch will exist. Therefore qemu capabilities may be nonexistent
too. If that's the case, we should throw an error message prior
jumping onto 'cleanup' label as the helper lookup function
remains silent on no search result.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Create the structures and API's to hold and manage the iSCSI host device.
This extends the 'scsi_host' definitions added in commit id '5c811dce'.
A future patch will add the XML parsing, but that code requires some
infrastructure to be in place first in order to handle the differences
between a 'scsi_host' and an 'iSCSI host' device.
Split virDomainHostdevSubsysSCSI further. In preparation for having
either SCSI or iSCSI data, create a union in virDomainHostdevSubsysSCSI
to contain just a virDomainHostdevSubsysSCSIHost to describe the
'scsi_host' host device
To integrate the security driver with the storage driver we need to
pass a callback for a function that will chown storage volumes.
Introduce and document the callback prototype.
Up to now, users have to pass two arguments at least: domain virt type
('qemu' vs 'kvm') and one of emulatorbin or architecture. This is not
much user friendly. Nowadays users mostly use KVM and share the host
architecture with the guest. So now, the API (and subsequently virsh
command) can be called with all NULLs (without any arguments).
Before this patch:
# virsh domcapabilities
error: failed to get emulator capabilities
error: virttype_str in qemuConnectGetDomainCapabilities must not be NULL
# virsh domcapabilities kvm
error: failed to get emulator capabilities
error: invalid argument: at least one of emulatorbin or architecture fields must be present
After:
# virsh domcapabilities
<domainCapabilities>
<path>/usr/bin/qemu-system-x86_64</path>
<domain>kvm</domain>
<machine>pc-i440fx-2.1</machine>
<arch>x86_64</arch>
<vcpu max='255'/>
</domainCapabilities>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds back the virDomainDef typedef into domain_conf and
makes all the numatune_conf functions independent of any virDomainDef
definitions.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1122205
Although the edits were changing in-memory XML, it was not flushed
to disk; so unless some other action changes XML, a libvirtd restart
would lose the changed information.
* src/conf/domain_conf.c (virDomainObjSetMetadata): Add parameter,
to save live status across restarts.
(virDomainSaveXML): Allow for test driver.
* src/conf/domain_conf.h (virDomainObjSetMetadata): Adjust
signature.
* src/bhyve/bhyve_driver.c (bhyveDomainSetMetadata): Adjust caller.
* src/lxc/lxc_driver.c (lxcDomainSetMetadata): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetMetadata): Likewise.
* src/test/test_driver.c (testDomainSetMetadata): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Before:
virsh # dominfo chx3
State: shut off
Max memory: 92160 KiB
Used memory: 92160 KiB
After:
virsh # dominfo container1
State: shut off
Max memory: 92160 KiB
Used memory: 0 KiB
Similar to qemu cases.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Convert the target snapshot state selector to a switch statement
enumerating all possible values. This points out a few mistakes in the
original selector.
The logic of the code is preserved until later patches.
As with the local SCSI passthrough devicesm qemu can't support snapshots
on those as the block ops are handled by the device. This is also true
for iSCSI backing of the disk. Remove the check for the local block
device and just forbid snapshot when the disk is of type 'lun'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1073368
When domain is started with numatune memory mode strict and the
nodeset does not include host NUMA node with DMA and DMA32 zones, KVM
initialization fails. This is because cgroup restrict even kernel
allocations. We are already doing numa_set_membind() which does the
same thing, only it does not restrict kernel allocations.
This patch leaves the userspace numa_set_membind() in place and moves
the cpuset.mems setting after the point where monitor comes up, but
before vcpu and emulator sub-groups are created.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Currently, we only bind the whole QEMU domain to memory nodes
specified in nodemask altogether. That, however, doesn't make much
sense when one wants to control from where the memory for particular
guest nodes should be allocated. QEMU allows us to do that by
specifying 'host-nodes' parameter for the 'memory-backend-ram' object,
so let's use that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When qemu switched to using OptsVisitor for -numa parameter, it did
two things in the same patch. One of them is that the numa parameter
is now visible in "query-command-line-options", the second one is that
it enabled using disjoint cpu ranges for -numa specification. This
will be used in later patch.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The numa patch series in qemu adds "memory-backend-ram" object type by
which we can tell whether we can use such objects.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
That can be lately achieved with by having .param == NULL in the
virQEMUCapsCommandLineProps struct.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There were numerous places where numatune configuration (and thus
domain config as well) was changed in different ways. On some
places this even resulted in persistent domain definition not to be
stable (it would change with daemon's restart).
In order to uniformly change how numatune config is dealt with, all
the internals are now accessible directly only in numatune_conf.c and
outside this file accessors must be used.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since there was already public virDomainNumatune*, I changed the
private virNumaTune to match the same, so all the uses are unified and
public API is kept:
s/vir\(Domain\)\?Numa[tT]une/virDomainNumatune/g
then shrunk long lines, and mainly functions, that were created after
that:
sed -i 's/virDomainNumatuneMemPlacementMode/virDomainNumatunePlacement/g'
And to cope with the enum name, I haad to change the constants as
well:
s/VIR_NUMA_TUNE_MEM_PLACEMENT_MODE/VIR_DOMAIN_NUMATUNE_PLACEMENT/g
Last thing I did was at least a little shortening of already long
name:
s/virDomainNumatuneDef/virDomainNumatune/g
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There are many places with numatune-related code that should be put
into special numatune_conf and this patch creates a basis for that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In XML format, by definition, order of fields should not matter, so
order of parsing the elements doesn't affect the end result. When
specifying guest NUMA cells, we depend only on the order of the 'cell'
elements. With this patch all older domain XMLs are parsed as before,
but with the 'id' attribute they are parsed and formatted according to
that field. This will be useful when we have tuning settings for
particular guest NUMA node.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Excerpt from the virCommandAddArgBuffer() description: "Correctly
transfers memory errors or contents from buf to cmd."
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch adds support for the QEMU vhost-user feature to libvirt.
vhost-user enables the communication between a QEMU virtual machine
and other userspace process using the Virtio transport protocol.
It uses a char dev (e.g. Unix socket) for the control plane,
while the data plane based on shared memory.
The XML looks like:
<interface type='vhostuser'>
<mac address='52:54:00:3b:83:1a'/>
<source type='unix' path='/tmp/vhost.sock' mode='server'/>
<model type='virtio'/>
</interface>
Signed-off-by: Michele Paolino <m.paolino@virtualopensystems.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1119173 documents that
commit eaba79d was flawed in the implementation of the
VIR_DOMAIN_BLOCK_JOB_ABORT_ASYNC flag when it comes to completing
a blockcopy. Basically, the qemu pivot action is async (the QMP
command returns immediately, but the user must wait for the
BLOCK_JOB_COMPLETE event to know that all I/O related to the job
has finally been flushed), but the libvirt command was documented
as synchronous by default. As active block commit will also be
using this code, it is worth fixing now.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Don't skip wait
loop after pivot.
Signed-off-by: Eric Blake <eblake@redhat.com>
In many places we define a variable as a 'const char *' when in fact
we modify it just a few lines below. Or even free it. We should not do
that.
There's one exception though, in xenSessionFree() xenapi_utils.c. We
are freeing the xen_session structure which is defined in
xen/api/xen_common.h public header. The structure contains session_id
which is type of 'const char *' when in fact it should have been just
'char *'. So I'm leaving this unmodified, just noticing the fact in
comment.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Rename linuxDomainInterfaceStats to virNetInterfaceStats in order
to allow adding platform specific implementations without
making consumer worrying about specific implementation to be used.
Also, rename util/virstatslinux.c to util/virstats.c so placing
other platform specific implementations into this file don't
look unexpected from the file name.
4cc1f1a01f introduced a crash when doing a
block copy as virStorageSourceInitChainElement was called on
"disk->mirror" that is still NULL at that point instead of "mirror"
which temporarily holds the mirror source struct until it's fully
initialized. This resulted into a crash as a NULL was dereferenced.
Reported by: Shanzi Yu <shyu@redhat.com>
Commit id '3ea661de' refactored the code to use the 'disk->src->path'
instead of getting the path from virDomainDiskGetSource(). The one
call to qemuOpenFile() didn't use the disk source path, rather it used
the path as passed from the caller (in this case 'vda') - this caused
a failure with the virt-test/tp-libvirt as follows:
$ virsh domblkinfo virt-tests-vm1 vda
error: cannot stat file '/home/virt-test/shared/data/images/jeos-20-64.qcow2': Bad file descriptor
$
This saves a few lines of code and catches the error when:
<spice autoport ='yes' defaultMode='any' ..>
<channel name='main' mode='secure'/>
</spice>
is specified with spice_tls = 0 in qemu.conf.
Instead of this error in qemuBuildGraphicsSPICECommandLine:
error: unsupported configuration: spice secure channels set in XML
configuration, but TLS port is not provided
an error is reported in qemuProcessSPICEAllocatePorts:
error: unsupported configuration: Auto allocation of spice TLS port
requested but spice TLS is disabled in qemu.conf
Inspired by:
https://www.redhat.com/archives/libvir-list/2014-June/msg01408.html
When creating cgroups for vcpu and emulator threads whilst starting a
domain, we explicitly skip creating those cgroups in case priv->cgroup
is NULL (cgroups not supported) because SetAffinity() serves the same
purpose. If the host supports only some cgroups (the ones we need are
either unmounted or disabled in qemu.conf), we error out with weird
message even though we could continue starting the domain.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1097028
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The default graphics channel mode is 'any', so as to defaultMode attribute.
If defaultMode and channel mode are all the default value 'any',
qemuConnectDomainXMLToNative will set TLSPort.
But in qemuBuildGraphicsSPICECommandLine, if spice_tls is not enabled, libvirtd
will report an error to tell the user that spice TLS is disabled in qemu.conf.
So qemuConnectDomainXMLToNative should check spice_tls is enabled,
then decide to allocate an tlsPort number to this graphics.
If user specified defaultMode is 'secure', qemuConnectDomainXMLToNative
could allocate tlsPort, and then let qemuBuildGraphicsSPICECommandLine reports
the spice_tls disabled error.
The related bug is:
https://bugzilla.redhat.com/show_bug.cgi?id=1113868
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that cgroups/security driver/locking driver support labelling of
individual images and tolerate network storage we don't have to refrain
from passing all image files to it. This allows removing the checking
code as we already make sure that the snapshot function won't be called
with unsupported options.
Now that security, cgroup and locking APIs support working on individual
images and we track the backing chain security info on a per-image basis
we can finally kill swapping the disk source in virDomainDiskDef and use
the virStorageSource directly.
Until now we were changing information about the disk source via
multiple steps of copying data. Now that we changed to a pointer to
store the disk source we might use it to change the approach to track
the data.
Additionally this will allow proper tracking of the backing chain.
When pivoting to a new disk source after a block commit (and possibly
after a soon-to-be-added active block commit) we changed just a few
fields to the new target. In case we'd copy a network disk to a local
file we'd not change the type properly.
To avoid such problems, switch to tracking of the source via changing of
the complete source struct to the one tracking the mirroring info.
Use the source struct and the corresponding function so that we can
avoid using the path separately. Now that
qemuDomainPrepareDiskChainElementPath isn't use anywhere, we can safely
remove it.
Additionally, the removal fixes a misaligned comment as the removed
function was added under a comment for a different function.
Add functions that will allow to set all the required cgroup stuff on
individual images taking a virStorageSourcePtr. Also convert functions
designed to setup whole backing chain to take advantage of the change.
Qemu will fallback to aio=threads when the cache mode doesn't use
O_DIRECT, even if aio=native was explictly set.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1086704
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
In the future we might need to track state of individual images. Move
the readonly and shared flags to the virStorageSource struct so that we
can keep them in a per-image basis.
Now that we are able to select images from the backing chain via indexed
access we should also convert possible network sources to
qemu-compatible strings before passing them to qemu.
Now that we are able to select images from the backing chain via indexed
access we should also convert possible network sources to
qemu-compatible strings before passing them to qemu.
The qemu block info function relied on working with local storage. Break
this assumption by adding support for remote volumes. Unfortunately we
still need to take a hybrid approach as some of the operations require a
filedescriptor.
Previously you'd get:
$ virsh domblkinfo gl vda
error: cannot stat file '/img10': Bad file descriptor
Now you get some stats:
$ virsh domblkinfo gl vda
Capacity: 10485760
Allocation: 197120
Physical: 197120
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1110198
For the regular dump operation we migrate the VM to a file. This won't
work when the VM has passthrough devices assigned. Rather than reporting
a cryptic error from qemu run our check whether it can be migrated.
This does not influence the memory-only dump that is allowed with
passthrough devices.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=874418
To allow changing the name that is recorded in the top of the current
image chain used in a block pull/rebase operation, we need to specify
the backing name to qemu. This is done via the "backing-file" attribute
to the block-stream commad.
To allow changing the name that is recorded in the overlay of the TOP
image used in a block commit operation, we need to specify the backing
name to qemu. This is done via the "backing-file" attribute to the
block-commit command.
This command allows to change the backing file name recorded in the
metadata of a qcow (or other) image. The capability also notifies that
the "block-stream" and "block-commit" commands understand the
"backing-file" attribute.
Replace the authType, chap, and cephx unions in virStoragePoolSource
with a single pointer to a virStorageAuthDefPtr. Adjust all users of
the previous chap/cephx and secret unions with the source->auth data.
Replace the inline "auth" struct in virStorageSource with a pointer
to a virStorageAuthDefPtr and utilize between the domain_conf, qemu_conf,
and qemu_command sources for finding the auth data for a domain disk
Use the probing functionality added in the last patch to turn on
a capability bit when active commit is present, and gate active
commit on that capability.
For my own reference: the difference between BLOCKJOB_SYNC and
BLOCKJOB_ASYNC is whether qemu generated an event at the
conclusion of blockpull; basically, RHEL 6.2 was the only release
of qemu that has the sync semantics and lacks the event. RHEL
6.3 added blockcopy, but also picked up on the upstream style
of qemu generating events. As no one is likely to backport
active commit to RHEL 6.2, it's safe for blockcommit to always
require async blockjob support.
Modifying qemucapabilitiestest is painful; the .replies files would
be so much easier if they had comments correlating which command
generated the given reply. Maybe I'll fix that up later...
* src/qemu/qemu_capabilities.h (QEMU_CAPS_ACTIVE_COMMIT): New
capability.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Use the new bit
* src/qemu/qemu_capabilities.c (virQEMUCaps): Name the new bit.
(virQEMUCapsProbeQMPCommands): Set it.
* tests/qemucapabilitiesdata/caps_1.3.1-1.replies: Update.
* tests/qemucapabilitiesdata/caps_1.4.2-1.replies: Likewise.
* tests/qemucapabilitiesdata/caps_1.5.3-1.replies: Likewise.
* tests/qemucapabilitiesdata/caps_1.6.0-1.replies: Likewise.
* tests/qemucapabilitiesdata/caps_1.6.50-1.replies: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
We are about to turn on support for active block commit. Although
qemu 2.0 was the first version to mostly support it, that version
mis-handles 0-length files, and doesn't have anything available for
easy probing. But qemu 2.1 fixed bugs, and made life simpler by
letting the 'top' argument be optional. Unless someone begs for
active commit with qemu 2.0, for now we are just going to enable
it only by probing for qemu 2.1 behavior (anyone backporting active
commit can also backport the optional argument behavior). This
requires qemu.git commit 7676e2c597000eff3a7233b40cca768b358f9bc9.
Although all our actual uses of block-commit supply arguments for
both base and top, we can omit both arguments and use a bogus
device string to trigger an interesting behavior in qemu. All QMP
commands first do argument validation, failing with GenericError
if a mandatory argument is missing. Once that passes, the code
in the specific command gets to do further checking, and the qemu
developers made sure that if device is the only supplied argument,
then the block-commit code will look up the device first, with a
failure of DeviceNotFound, before attempting any further argument
validation (most other validations fail with GenericError). Thus,
the category of error class can reliably be used to decipher
whether the top argument was optional, which in turn implies a
working active commit. Since we expect our bogus device string to
trigger an error either way, the code is written to return a
distinct return value without spamming the logs.
* src/qemu/qemu_monitor.h (qemuMonitorSupportsActiveCommit): New
prototype.
* src/qemu/qemu_monitor.c (qemuMonitorSupportsActiveCommit):
Implement it.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockCommit):
Allow NULL for top and base, for probing purposes.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockCommit):
Likewise, implementing the probe.
* tests/qemumonitorjsontest.c (mymain): Enable...
(testQemuMonitorJSONqemuMonitorSupportsActiveCommit): ...a new test.
Signed-off-by: Eric Blake <eblake@redhat.com>
So far only information on disks and host devices are exposed in the
capabilities XML. Well, at least something. Even a new test is
introduced. The qemu capabilities are stolen from already existing
qemucapabilities test. There's one tricky point though. Functions that
checks host's KVM and VFIO capabilities, are impossible to mock
currently. So in the test, we are setting the capabilities by hand.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Sometimes it may be useful to get a default machine for given qemu
binary. Fortunately, the default machine is stored always on the first
position in the supported machines array.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This internal API is meant to answer the question 'Is this machine
type supported by given qemu?'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The API may come handy if somebody has an architecture and wants to
look through available qemus if the architecture is supported or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Replace:
if (virBufferError(&buf)) {
virBufferFreeAndReset(&buf);
virReportOOMError();
...
}
with:
if (virBufferCheckError(&buf) < 0)
...
This should not be a functional change (unless some callers
misused the virBuffer APIs - a different error would be reported
then)
So far, we only report an error if formatting the siblings bitmap
in NUMA topology fails.
Be consistent and always report error in virCapabilitiesFormatXML.
https://bugzilla.redhat.com/show_bug.cgi?id=1086121
We now support startupPolicy='optional' for disks, but this
should work only for cold boot, not for restore or migrate.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This introduces two new attributes "cmd_per_lun" and "max_sectors" same
with the names QEMU uses for virtio-scsi. An example of the XML:
<controller type='scsi' index='0' model='virtio-scsi' cmd_per_lun='50'
max_sectors='512'/>
The corresponding QEMU command line:
-device virtio-scsi-pci,id=scsi0,cmd_per_lun=50,max_sectors=512,
bus=pci.0,addr=0x3
Signed-off-by: Mike Perez <thingee@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The IDE bus doesn't support readonly disks, so inform the user with an
error message instead of let qemu fail with a more obscure "Device
'ide-hd' could not be initialized" error message.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1112939
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
We have the following matrix of possible arguments handled by the logic
statement touched by this patch:
| flags & _REUSE_EXT | !(flags & _REUSE_EXT)
-------+--------------------+----------------------
format| (1) | (2)
-------+--------------------+----------------------
!format| (3) | (4)
-------+--------------------+----------------------
In cases 1 and 2 the user provided a format, in cases 3 and 4 not. The
user requests to use a pre-existing image in 1 and 3 and libvirt will
create a new image in 2 and 4.
The difference between cases 3 and 4 is that for 3 the format is probed
from the user-provided image, whereas in 4 we just use the existing disk
format.
The current code would treat cases 1,3 and 4 correctly but in case 2 the
format provided by the user would be ignored.
The particular piece of code was broken in commit 35c7701c64
but since it was introduced a few commits before that it was never
released as working.
Commit 55bbb011b9 introduced a regression
where we forgot to save the persistent domain configuration after an
external snapshot. This would make libvirt forget the snapshots and
effectively revert to the previous state in the following scenario:
1) Start VM
2) Take snapshot
3) Destroy VM
4) Restart libvirtd
Also fix spurious blank line added by patch mentioned above.
Since commit d86c876a66 we are using
guestfwd=tcp:IP:PORT,chardev=ID for guestfwd specification, however,
that has not changed in qemu, so guestfwd does not work since.
Apart from that, guestfwd is not working with older qemu that doesn't
have QEMU_CAPS_DEVICE.
Both regressions exist since late 2009 and nobody found that (until
now), so I'm only fixing the first one.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1112066
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The QEMU VNC client arg code has a long standing typo
of SASL_CONF_DIR when it should be SASL_CONF_PATH for
the env variable name.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When creating a new disk mirror the new struct is stored in a separate
variable until everything went well. The removed hunk would actually
remove existing mirror information for example when the api would be run
if a mirror still exists.
I'm going to add functions that will deal with individual image files
rather than whole disks. Rename the security function to make room for
the new one.
The new VIR_CONNECT_COMPARE_CPU_FAIL_INCOMPATIBLE flag for
virConnectCompareCPU can be used to get an error
(VIR_ERR_CPU_INCOMPATIBLE) describing the incompatibility instead of the
usual VIR_CPU_COMPARE_INCOMPATIBLE return code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When CPU comparison APIs return VIR_CPU_COMPARE_INCOMPATIBLE, the caller
has no clue why the CPU is considered incompatible with host CPU. And in
some cases, it would be nice to be able to get such info in a client
rather than having to look in logs.
To achieve this, the APIs can be told to return VIR_ERR_CPU_INCOMPATIBLE
error for incompatible CPUs and the reason will be described in the
associated error message.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Currently, only LXC has hostdev mode 'capabilities' support,
so the other drivers should forbid to define it in XML.
The hostdev mode check is added to devicesPostParseCallback()
for each hypervisor driver.
But there are some drivers lack function devicesPostParseCallback(),
so only add check for qemu, libxl, openvz, uml, xen, xenapi.
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
As we are doing with the enum structures, a cleanup in "src/qemu/"
directory was done now. All the enums that were defined in the
header files were converted to typedefs in this directory. This
patch includes all the adjustments to remove conflicts when you do
this kind of change. "Enum-to-typedef"'s conversions were made in
"src/qemu/qemu_{capabilities, domain, migration, hotplug}.h".
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
When looking for a port to allocate, the port allocator didn't take in
consideration ports that are statically set by the user. Defining
these two graphics elements in the XML would cause an error, as the
port allocator would try to use the same port for the spice graphics
element:
<graphics type='spice' autoport='yes'/>
<graphics type='vnc' port='5900' autoport='no'/>
The new *[pP]ortReserved variables keep track of the ports that were
successfully tracked as used by the port allocator but that weren't
bound.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1081881
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
There are no options to parse here other than the name of the device,
and all three possible device names have the same prefix
("virtio-balloon" with "-ccw", "-pci", or "-device" appended), so the
code is fairly simple. It has been implemented such that it will be
easier to add handling for other -device entries that aren't otherwise
recognized - just add another "else if (STRPREFIX(opts, ....)" clause.
qemuParseCommandLineString() previously would always add a <memballoon
model='virtio'/> to every result (the comments erroneously say that it
is adding a <memballoon model='none'/>) This has been changed to add
model='none', and 84 test case xml's updated accordingly (so that
qemuxml2argvtest won't fail).
Now that the memballoon device is properly parsed, we can safely add a
test for properly ignoring -nodefconfig and -nodefaults. Rather than
adding an entire new test case for this (and memballoon), we just
randomly pick the clock-utc test and modify it slightly to fulfill the
purpose.
I'm going to add functions that will deal with individual image files
rather than whole disks. Rename the security function to make room for
the new one.
The image labels are stored in the virStorageSource struct. Convert the
virDomainDiskDefGetSecurityLabelDef helper not to use the full disk def
and move it appropriately.
There are two places where you'll find info on page sizes. The first
one is under <cpu/> element, where all supported pages sizes are
listed. Then the second one is under each <cell/> element which refers
to concrete NUMA node. At this place, the size of page's pool is
reported. So the capabilities XML looks something like this:
<capabilities>
<host>
<uuid>01281cda-f352-cb11-a9db-e905fe22010c</uuid>
<cpu>
<arch>x86_64</arch>
<model>Westmere</model>
<vendor>Intel</vendor>
<topology sockets='1' cores='1' threads='1'/>
...
<pages unit='KiB' size='4'/>
<pages unit='KiB' size='2048'/>
<pages unit='KiB' size='1048576'/>
</cpu>
...
<topology>
<cells num='4'>
<cell id='0'>
<memory unit='KiB'>4054408</memory>
<pages unit='KiB' size='4'>1013602</pages>
<pages unit='KiB' size='2048'>3</pages>
<pages unit='KiB' size='1048576'>1</pages>
<distances/>
<cpus num='1'>
<cpu id='0' socket_id='0' core_id='0' siblings='0'/>
</cpus>
</cell>
<cell id='1'>
<memory unit='KiB'>4071072</memory>
<pages unit='KiB' size='4'>1017768</pages>
<pages unit='KiB' size='2048'>3</pages>
<pages unit='KiB' size='1048576'>1</pages>
<distances/>
<cpus num='1'>
<cpu id='1' socket_id='0' core_id='0' siblings='1'/>
</cpus>
</cell>
...
</cells>
</topology>
...
</host>
<guest/>
</capabilities>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For future work we want to get info for not only the free memory
but overall memory size too. That's why the function must have
new signature too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When the block job event was first added, it was for block pull,
where the active layer of the disk remains the same name. It was
also in a day where we only cared about local files, and so we
always had a canonical absolute file name. But two things have
changed since then: we now have network disks, where determining
a single absolute string does not really make sense; and we have
two-phase jobs (copy and active commit) where the name of the
active layer changes between the first event (ready, on the old
name) and second (complete, on the pivoted name).
Adam Litke reported that having an unstable string between events
makes life harder for clients. Furthermore, all of our API that
operate on a particular disk of a domain accept multiple strings:
not only the absolute name of the active layer, but also the
destination device name (such as 'vda'). As this latter name is
stable, even for network sources, it serves as a better string
to supply in block job events.
But backwards-compatibility demands that we should not change the
name handed to users unless they explicitly request it. Therefore,
this patch adds a new event, BLOCK_JOB_2 (alas, I couldn't think of
any nicer name - but at least Migrate2 and Migrate3 are precedent
for a number suffix). We must double up on emitting both old-style
and new-style events according to what clients have registered for
(see also how IOError and IOErrorReason emits double events, but
there the difference was a larger struct rather than changed
meaning of one of the struct members).
Unfortunately, adding a new event isn't something that can easily
be broken into pieces, so the commit is rather large.
* include/libvirt/libvirt.h.in (virDomainEventID): Add a new id
for VIR_DOMAIN_EVENT_ID_BLOCK_JOB_2.
(virConnectDomainEventBlockJobCallback): Document new semantics.
* src/conf/domain_event.c (_virDomainEventBlockJob): Rename field,
to ensure we catch all clients.
(virDomainEventBlockJobNew): Add parameter.
(virDomainEventBlockJobDispose)
(virDomainEventBlockJobNewFromObj)
(virDomainEventBlockJobNewFromDom)
(virDomainEventDispatchDefaultFunc): Adjust clients.
(virDomainEventBlockJob2NewFromObj)
(virDomainEventBlockJob2NewFromDom): New functions.
* src/conf/domain_event.h: Add new prototypes.
* src/libvirt_private.syms (domain_event.h): Export new functions.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Generate two
different events.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Likewise.
* src/remote/remote_protocol.x
(remote_domain_event_block_job_2_msg): New struct.
(REMOTE_PROC_DOMAIN_EVENT_BLOCK_JOB_2): New RPC.
* src/remote/remote_driver.c
(remoteDomainBuildEventBlockJob2): New handler.
(remoteEvents): Register new event.
* daemon/remote.c (remoteRelayDomainEventBlockJob2): New handler.
(domainEventCallbacks): Register new event.
* tools/virsh-domain.c (vshEventCallbacks): Likewise.
(vshEventBlockJobPrint): Adjust client.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
The block commit code looks for an explicit base file relative
to the discovered top file; so for a chain of:
base <- snap1 <- snap2 <- snap3
and a command of:
virsh blockcommit $dom vda --base snap2 --top snap1
we got a sane message (here from libvirt 1.0.5):
error: invalid argument: could not find base 'snap2' below 'snap1' in chain for 'vda'
Meanwhile, recent refactoring has slightly reduced the quality of the
libvirt error messages, by losing the phrase 'below xyz':
error: invalid argument: could not find image 'snap2' in chain for 'snap3'
But we had a one-off, where we were not excluding the top file
itself in searching for the base; thankfully qemu still reports
the error, but the quality is worse:
virsh blockcommit $dom vda --base snap2 --top snap2
error: internal error unable to execute QEMU command 'block-commit': Base '/snap2' not found
Fix the one-off in blockcommit by changing the semantics of name
lookup - if a starting point is specified, then the result must
be below that point, rather than including that point. The only
other call to chain lookup was blockpull code, which was already
forcing the lookup to omit the active layer and only needs a
tweak to use the new semantics.
This also fixes the bug exposed in the testsuite, where when doing
a lookup pinned to an intermediate point in the chain, we were
unable to return the name of the parent also in the chain.
* src/util/virstoragefile.c (virStorageFileChainLookup): Change
semantics for non-NULL startFrom.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Adjust caller,
to keep existing semantics.
* tests/virstoragetest.c (mymain): Adjust to expose new semantics.
Signed-off-by: Eric Blake <eblake@redhat.com>
For block devices used as snapshot source the new snapshot code would
set the reuse flag. This inhibits to take snapshot without specially
preparing the block image before taking the snapshot.
Fortunately this is not a regression as only the new way of specifying
snapshot source is affected.
For the followin snapshot XML:
<domainsnapshot>
<disks>
<disk name='vda' type='block'>
<driver type='qcow2'/>
<source dev="/dev/andariel/testsnap" />
</disk>
</disks>
</domainsnapshot>
You'd get:
error: internal error: unable to execute QEMU command 'transaction': Image is not in qcow2 format
After this patch the snapshot is created successfully.
A future patch will add two-phase block commit jobs; as the
mechanism for managing them is similar to managing a block copy
job, existing errors should be made generic enough to occur
for either job type.
* src/conf/domain_conf.c (virDomainHasDiskMirror): Update
comment.
* src/qemu/qemu_driver.c (qemuDomainDefineXML)
(qemuDomainSnapshotCreateXML, qemuDomainRevertToSnapshot)
(qemuDomainBlockJobImpl, qemuDomainBlockCopy): Update error
message.
* src/qemu/qemu_hotplug.c (qemuDomainDetachDiskDevice): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit f586965 accidentally changed the semantics of the
virDomainBlockCommit command; where it previously looked for
an explicit top argument from the top of the chain, it now
starts from the backing file of the top. Of course, until
we allow active commits, the only difference it makes is in
the quality of the error message, but with code for active
commit coming soon, we need to support an explicit mention
of the active layer.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Start looking
from top of chain.
Signed-off-by: Eric Blake <eblake@redhat.com>
When saving domain with relabel=no, the file that gets created must have the
context set anyway. That way restore can be successful without the need of
relabelling the file.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Now that qemu 2.0 allows commit of the active layer, people are
attempting to use virsh blockcommit and getting into a stuck
state, because libvirt is unprepared to handle the two-phase
commit required by qemu.
Stepping back a bit, there are two valid semantics for a
commit operation:
1. Maintain a 'golden' base, and a transient overlay. Make
changes in the overlay, and if everything appears to work,
commit those changes into the base, but still keep the overlay
for the next round of changes; repeat the cycle as desired.
2. Create an external snapshot, then back up the stable state
in the backing file. Once the backup is complete, commit the
overlay back into the base, and delete the temporary snapshot.
Since qemu doesn't know up front which of the two styles is
preferred, a block commit of the active layer merely gets
the job into a synchronized state, and sends an event; then
the user must either cancel (case 1) or complete (case 2),
where qemu then sends a second event that actually ends the
job. However, until commit e6bcbcd, libvirt was blindly
assuming the semantics that apply to a commit of an
intermediate image, where there is only one sane conclusion
(the job automatically ends with fewer elements in the chain);
and getting stuck because it wasn't prepared for qemu to enter
a second phase of the job.
This patch adds a flag to the libvirt API that a user MUST
supply in order to acknowledge that they will be using two-phase
semantics. It might be possible to have a mode where if the
flag is omitted, we automatically do the case 2 semantics on
the user's behalf; but before that happens, I must do additional
patches to track the fact that we are doing an active commit
in the domain XML. Later patches will add support of the flag,
and once 2-phase semantics are working, we can then decide
whether to relax things to allow an omitted flag to cause an
automatic pivot.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_COMMIT_ACTIVE)
(VIR_DOMAIN_BLOCK_JOB_TYPE_ACTIVE_COMMIT): New enums.
* src/libvirt.c (virDomainBlockCommit): Document two-phase job
when committing active layer, through new flag.
(virDomainBlockJobAbort): Document that pivot also occurs after
active commit.
* tools/virsh-domain.c (vshDomainBlockJob): Cover new job.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Explicitly
reject active copy; later patches will add it in.
Signed-off-by: Eric Blake <eblake@redhat.com>
The qemu driver always adds these options to the qemu commandlines,
but the commandline parser didn't recognize them, so sending a
libvirt-generated qemu commandline to its own argvtoxml would always
result in a warning message and a qemu namespace added to the
xml. Since the options don't add any functionality to the domain, they
should just be ignored (similar to -S).
Note that we can't yet add a test for this to qemuargv2xmltest,
because we would have to add QEMU_CAPS_NODEFCONFIG and
QEMU_CAPS_DEVICE to the capabilities for any corresponding
xml2argvtest, and QEMU_CAPS_DEVICE would necessitate having support
for parsing a memballoon device in order for qemuargv2xmltest to
pass. So we wait to add a test for -nodefconfig and -nodefaults until
after adding support for parsing -device virtio-balloon-*.
The current implementation of 'virsh blockcopy' (virDomainBlockRebase)
is limited to copying to a local file name. But future patches want
to extend it to also copy to network disks. This patch converts over
to a virStorageSourcePtr, although it should have no semantic change
visible to the user, in anticipation of those future patches being
able to use more fields for non-file destinations.
* src/conf/domain_conf.h (_virDomainDiskDef): Change type of
mirror information.
* src/conf/domain_conf.c (virDomainDiskDefParseXML): Localize
mirror parsing into new object.
(virDomainDiskDefFormat): Adjust clients.
* src/qemu/qemu_domain.c (qemuDomainDeviceDefPostParse):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl, qemuDomainBlockCopy): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
As part of the work on backing chains, I'm finding that it would
be easier to directly manipulate chains of pointers (adding a
snapshot merely adjusts pointers to form the correct list) rather
than copy data from one struct to another. This patch converts
domain disk source to be a pointer.
In this patch, the pointer is ALWAYS allocated (thanks in part to
the previous patch forwarding all disk def allocation through a
common point), and all other changse are just mechanical fallout of
the new type; there should be no functional change. It is possible
that we may want to leave the pointer NULL for a cdrom with no
medium in a later patch, but as that requires a closer audit of the
source to ensure we don't fault on a null dereference, I didn't do
it here.
* src/conf/domain_conf.h (_virDomainDiskDef): Change type of src.
* src/conf/domain_conf.c: Adjust all clients.
* src/security/security_selinux.c: Likewise.
* src/qemu/qemu_domain.c: Likewise.
* src/qemu/qemu_command.c: Likewise.
* src/qemu/qemu_conf.c: Likewise.
* src/qemu/qemu_process.c: Likewise.
* src/qemu/qemu_migration.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/lxc/lxc_driver.c: Likewise.
* src/lxc/lxc_controller.c: Likewise.
* tests/securityselinuxlabeltest.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
A future patch wants to create disk definitions with non-zero
default contents; to avoid crashes, all callers that allocate
a disk definition should go through a common point.
I found allocation points by looking for any code that increments
ndisks, as well as any matches for ALLOC.*disk. Most places that
modified ndisks were covered by the parse from XML to domain/device
definition by initial domain creation or device hotplug; I also
hand-checked all drivers that generate a device struct on the
fly during getXMLDesc.
* src/conf/domain_conf.h (virDomainDiskDefNew): New prototype.
* src/conf/domain_conf.c (virDomainDiskDefNew): New function.
(virDomainDiskDefParseXML): Use it.
* src/parallels/parallels_driver.c (parallelsAddHddInfo):
Likewise.
* src/qemu/qemu_command.c (qemuParseCommandLine): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc): Likewise.
* src/vmx/vmx.c (virVMXParseDisk): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxprDisks, xenParseSxpr):
Likewise.
* src/xenxs/xen_xm.c (xenParseXM): Likewise.
* src/libvirt_private.syms (domain_conf.h): Export it.
Signed-off-by: Eric Blake <eblake@redhat.com>
As part of the work on backing chains, I'm finding that it would
be easier to directly manipulate chains of pointers (adding a
snapshot merely adjusts pointers to form the correct list) rather
than copy data from one struct to another. This patch converts
snapshot source to be a pointer.
In this patch, the pointer is ALWAYS allocated (any code that
increases ndisks now also allocates a source pointer for each
new disk), and all other changes are just mechanical fallout of
the new type; there should be no functional change. It is
possible that we may want to leave the pointer NULL for internal
snapshots in a later patch, but as that requires a closer audit
of the source to ensure we don't fault on a null dereference, I
didn't do it here.
* src/conf/snapshot_conf.h (_virDomainSnapshotDiskDef): Change
type of src.
* src/conf/snapshot_conf.c: Adjust all clients.
* src/qemu/qemu_conf.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
This simplifies the usage in {libxl,qemu}DomainGetNumaParameters
and it's needed for consistent error reporting in virBitmapFormat.
Also remove the forgotten ATTRIBUTE_NONNULL marker.
qemuMonitorJSONSendKey declares the "holdtime" argument as unsigned int
while the command was constructed in qemuMonitorJSONMakeCommand using
the "P" modifier which took a unsigned long from the variable
arguments which then made it possible to access uninitialized memory.
This broke the qemumonitorjsontest on 32bit fedora 20:
64) qemuMonitorJSONSendKey
... libvirt: QEMU Driver error : internal error: unsupported data type 'W' for arg 'WVSì D$0èwÿÿÃAå' FAILED
Uncovered by upstream commit f744b831c6.
Additionally add test for the hold-time option.
Some of the APIs already return int since they can produce errors that
need to be propagated. For consistency reasons, this patch changes the
rest of the APIs to also return int even though they do not fail or
report any errors.
In general, we should only remove a backend after seeing DEVICE_DELETED
event for a corresponding frontend.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In general, we should only remove a backend after seeing DEVICE_DELETED
event for a corresponding frontend. This doesn't make any difference for
disks attached using -drive or drive_add since QEMU automatically
removes their backends but it's still better to make our code
consistent. And it may start making difference in case we switch to
attaching disks using -blockdev.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
[1] reported that we are removing network's backend too early. I didn't
really get the reproducer but libvirt behaves strangely when a guest
does not confirm the removal, e.g., it does not support PCI hotplug. In
such case, detaching a network device leaves its frontend in place but
removes the backend, which makes the device unusable for the guest.
Moreover attaching the same device again succeeds and both the guest and
libvirt will see two network interfaces attached but only one of them is
actually working.
I checked with Paolo Bonzini and he confirmed we should only remove a
backend after seeing DEVICE_DELETED event for a corresponding frontend.
[1] https://www.redhat.com/archives/libvir-list/2014-March/msg01740.html
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch adds option to specify that a json qemu command argument is
optional without the need to use if's or ternary operators to pass the
list. Additionally all the modifier characters are documented to avoid
user confusion.
My future work will modify the metadata crawler function to use the
storage driver file APIs to access the files instead of accessing them
directly so that we will be able to request the metadata for remote
files too. To avoid linking the storage driver to every helper file
using the utils code, the backing chain traversal function needs to be
moved to the storage driver source.
Additionally the virt-aa-helper and virstoragetest programs need to be
linked with the storage driver as a result of this change.
In "src/conf/domain_conf.h" there are many enum declarations. The
cleanup in this header filer was started, but it wasn't enough and
there are many other files that has enum variables declared. So, the
commit was starting to be big. This commit finish the cleanup in this
header file and in other files that has enum variables, parameters,
or functions declared.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
In "src/conf/domain_conf.h" there are many enumerations (enum)
declarations to be converted as a typedef too. As mentioned before,
it's better to use a typedef for variable types, function types and
other usages. I think this file has most of those enum declarations
at "src/conf/". So, me and Eric Blake plan to keep the cleanups all
over the source code. This time, most of the files changed in this
commit are related to part of one file: "src/conf/domain_conf.h".
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Currently, we don not acquire any job when removing a device after
DEVICE_DELETED event was received from QEMU. This means that if there is
another API running at the time DEVICE_DELETED is delivered and the API
acquired a job, we may happily change the definition of the domain the
API is working with whenever it unlocks the domain object (e.g., to talk
with its monitor). That said, we have to acquire a job before finishing
device removal to make things safe. However, doing so in the main event
loop would cause a deadlock so we need to move most of the event handler
into a separate thread.
Another good reason for both acquiring a job and handling the event in a
separate thread is that we currently remove a device backend immediately
after removing its frontend while we should only remove the backend once
we already received DEVICE_DELETED event. That is, we will have to talk
to QEMU monitor from the event handler.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If QEMU supports DEVICE_DELETED event, we always call
qemuDomainRemoveDevice from the event handler. However, we will need to
push this call away from the main event loop and begin a job for it (see
the following commit), we need to make sure the device is fully removed
by the original thread (and within its existing job) in case the
DEVICE_DELETED event arrives before qemuDomainWaitForDeviceRemoval times
out.
Without this patch, device removals would be guaranteed to never finish
before the timeout because the could would be blocked by the original
job being still active.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Currently we don't support mixed (external + internal) snapshots. The
code detecting the snapshot type didn't make sure that the memory image
was consistent with the snapshot type leading into strange error
message:
$ virsh snapshot-create-as --domain VM --diskspec vda,snapshot=internal --memspec snapshot=external,file=/tmp/blah
error: internal error: unexpected code path
Fix the mixed detection code to detect this kind of mistake:
$ virsh snapshot-create-as --domain VM --diskspec vda,snapshot=internal --memspec snapshot=external,file=/tmp/blah
error: unsupported configuration: mixing internal and external targets for a snapshot is not yet supported
A internal snapshot of a active VM with the memory snapshot disabled
explicitly would actually still take the memory snapshot. Reject it
explicitly.
Before:
$ virsh snapshot-create-as --domain VM --diskspec vda,snapshot=internal --memspec snapshot=no
Domain snapshot 1401353155 created
After:
$ virsh snapshot-create-as --domain VM --diskspec vda,snapshot=internal --memspec snapshot=no
error: Operation not supported: internal snapshot of a running VM must include the memory state
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1083345
Even successful start of a VM from a managed save image would spam the
logs with the following message:
Unable to restore from managed state [path]. Maybe the file is
corrupted?
Re-arrange the logic to output the warning only when the image is
corrupted.
The flaw was introduced in commit cfc28c66.
Add argument to return backing file format of a file probed by
virStorageFileGetMetadataFromFD so that it can be used in place of
virStorageFileGetMetadataFromBuf.
qemu 2.0 added the ability to commit the active layer, but slightly
differently than what libvirt had been anticipating in its
implementation of the virDomainBlockCommit call. As a result, if
you attempt to do a 'virsh blockcommit $dom vda', qemu gets into a
state where it is waiting on libvirt to end the job, while libvirt
is waiting on qemu to end the job, and the guest is effectively
hung with regards to further commands for that block device.
I have patches coming down the pipeline that will add full support
for blockcommit of the active layer when coupled with qemu 2.0 or
later; but they depend on Peter's improvements to block job handling
and form enough of a new feature that they are not ready for
inclusion in the 1.2.5 release. So for now, just reject the
attempt, rather than letting the user get stuck. This is no worse
than the behavior of qemu 1.7 rejecting the job.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Reject active
commit.
Signed-off-by: Eric Blake <eblake@redhat.com>
QEMU ppce500 board uses the legacy -serial option.
Other PPC boards don't give any way to explicitly wire in a -chardev
except pseries which uses -device spapr-vty with -chardev.
Add test case for -serial option for ppce500
Signed-off-by: Olivia Yin <Hong-Hua.Yin@freescale.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1088787
Clean up unix socket files for chardevs using mode='bind',
like we clean up the monitor socket.
They are created by QEMU on startup and not really useful
after shutting it down.
For a clock element as above, libvirt simply converts current system
time with localtime_r(), then starts qemu with a time string that
doesn't contain any timezone information. So, from qemu's point of
view, the -rtc string it gets for:
<clock offset='variable' basis='utc' adjustment='10800'/>
is identical to the -rtc string it gets for:
<clock offset='variable' basis='localtime' adjustment='0'/>
(assuming the host is in a timezone that is 10800 seconds ahead of
UTC, as is the case on the machine where this message is being
written).
Since the commandlines are identical, qemu will behave identically
after this point in either case.
There are two problems in the case of basis='localtime' though:
Problem 1) If the guest modifies its RTC, for example to add 20
seconds, the RTC_CHANGE event from qemu will then contain offset:20 in
both cases. But libvirt will have saved the original adjustment into
adjustment0, and will add that value onto the offset in the
event. This means that in the case of basis=;utc', it will properly
emit an event with offset:10820, but in the case of basis='localtime'
the event will contain offset:20, which is *not* the new offset of the
RTC from UTC (as the event it documented to provide).
Problem 2) If the guest is migrated to another host that is in a
different timezone, or if it is migrated or saved/restored after the
DST status has changed from what it was when the guest was originally
started, the newly restarted guest will have a different RTC (since it
will be based on the new localtime, which could have shifted by
several hours).
The solution to both of these problems is simple - rather than
maintaining the original adjustment value along with
"basis='localtime'" in the domain status, when the domain is started
we convert the adjustment offset to one relative to UTC, and set the
status to "basis='utc'". Thus, whatever the RTC offset was from UTC
when it was initially started, that offset will be maintained when
migrating across timezones and DST settings, and the RTC_CHANGE events
will automatically contain the proper offset (which should by
definition always be relative to UTC).
This fixes a problem that was implied but not openly stated in:
https://bugzilla.redhat.com/show_bug.cgi?id=964177
commit e31b5cf393 attempted to fix libvirt's
VIR_DOMAIN_EVENT_ID_RTC_CHANGE, which is documentated to always
provide the new offset of the domain's real time clock from UTC. The
problem was that, in the case that qemu is provided with an "-rtc
base=x" where x is an absolute time (rather than "utc" or
"localtime"), the offset sent by qemu's RTC_CHANGE event is *not* the
new offset from UTC, but rather is the sum of all changes to the
domain's RTC since it was started with base=x.
So, despite what was said in commit e31b5cf393, if we assume that
the original value stored in "adjustment" was the offset from UTC at
the time the domain was started, we can always determine the current
offset from UTC by simply adding the most recent (i.e. current) offset
from qemu to that original adjustment.
This patch accomplishes that by storing the initial adjustment in the
domain's status as "adjustment0". Each time a new RTC_CHANGE event is
received from qemu, we simply add adjustment0 to the value sent by
qemu, store that as the new adjustment, and forward that value on to
any event handler.
This patch (*not* e31b5cf393, which should be reverted prior to
applying this patch) fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=964177
(for the case where basis='utc'. It does not fix basis='localtime')
This reverts commit e31b5cf393.
This commit attempted to work around a bug in the offset value
reported by qemu's RTC_CHANGE event in the case that a variable base
date was given on the qemu commandline. The patch mixed up the math
involved in arriving at the corrected offset to report, and in the
process added an unnecessary private attribute to the clock
element. Since that element is private/internal and not used by anyone
else, it makes sense to simplify things by removing it.
Currently the protocol type with index 0 was NBD which made it hard to
distinguish whether the protocol type was actually assigned. Add a new
protocol type with index 0 to distinguish it explicitly.
The gluster volume name was previously stored as part of the source path
string. This is unfortunate when we want to do operations on the path as
the volume is used separately.
Parse and store the volume name separately for gluster storage volumes
and use the newly stored variable appropriately.
Refactor the function to accept a virStorageSourcePtr instead of just
the path, add a check to run it only on local storage and fix callers
(possibly by using a newly introduced wrapper that wraps a path in the
virStorageSource struct for legacy code)
Refresh the disk backing chains when reconnecting to a qemu process
after daemon restart. There are a few internal fields that don't get
refreshed from the XML. Until we are able to do that, let's reload all
the metadata by the backing chain crawler.
This is similar to the previous commit in that we need to explicitly
send migrate_cancel when libvirt detects an error other than those
reported by query-migrate. However, the possibility to hit such error is
pretty small.
When QEMU reports failed or cancelled migration, we don't need to send
it migrate_cancel QMP command. But in all other error paths, such as if
we detect broken connection to a destination daemon or something else
happens inside libvirt, we need to explicitly send migrate_cancel
command instead of relying on the migration to be implicitly cancelled
when destination QEMU is killed.
Because we were not doing so, one could end up with a paused domain
after failed migration.
https://bugzilla.redhat.com/show_bug.cgi?id=1098833
If virDomainMemoryStats is called too soon after domain startup,
QEMU returns:
"error":{"class":"GenericError","desc":"guest hasn't updated any stats yet"}
when we try to query balloon stats.
Check for this reply and log it as OPERATION_INVALID instead of
INTERNAL_ERROR. This means the daemon only logs it at the debug level,
without polluting system logs.
Reported by Laszlo Pal:
https://www.redhat.com/archives/libvirt-users/2014-May/msg00023.html
In the f56c773bf we've made the substitution but forgot to fix one
comment which is still referring to the old name. This may be
potentially misleading.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When doing an external checkpoint of a VM with no disk selected we'd
return failure but not set error code. This was a result of ret not
being set to 0 during walking of the disk array.
Rework early failure checking and set the error code to success before
iterating the array of disks so that we return success if no disks are
snapshotted.
Fixes the following symptom (or without --diskspec for diskless VMs)
$ virsh snapshot-create-as snapshot-test --memspec /tmp/asdf --diskspec hda,snapshot=no
error: An error occurred, but the cause is unknown
If neither disks nor memory are selected for snapshot we'd record
metadata in case of external snapshot and do a disk snapshot in case of
external disk snapshot. Forbid this as it doesn't make much sense.
For now, we set the migration URI via command line '--migrate_uri' or
construct the URI by looking up the dest host's hostname which could be
solved by DNS automatically.
But in cases the dest host have two or more NICs to reach, we may need to
send the migration data over a specific NIC which is different from the
automatically resolved one for some reason like performance, security, etc.
Thus we must explicitly specify the migrateuri in command line everytime,
but it is too troublesome if there are many such hosts (and don't forget
virt-manager).
This patch adds a configuration file option on dest host to save the
default value set which can be specified to a migration hostname or
one of this host's addresses used for transferring data, thus user doesn't
have to specify it in command line everytime.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit d5c86278 was incomplete; other functions also triggered
compiler warnings about collisions in the use of 'sync'.
* src/qemu/qemu_driver.c (qemuDomainSetTime): Fix another client.
* tools/virsh-domain-monitor.c (cmdDomTime): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Old gcc complains about shadowing 'sync' variable:
../../src/qemu/qemu_agent.c: In function 'qemuAgentSetTime':
../../src/qemu/qemu_agent.c:1737: warning: declaration of 'sync'
shadows a global declaration [-Wshadow]
/usr/include/unistd.h:464: warning: shadowed declaration is here
[-Wshadow]
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The commit 84c59ffa improved the way we change ejectable media.
If for any reason the first "eject" didn't open the tray we
should return with error.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This partially reverts commits b279e52f7 and ea18f8b2.
It turns out our code base is full of:
if ((struct.member = virBlahFromString(str)) < 0)
goto error;
Meanwhile, the C standard says it is up to the compiler whether
an enum is signed or unsigned when all of its declared values
happen to be positive. In my testing (Fedora 20, gcc 4.8.2),
the compiler picked signed, and nothing changed. But others
testing with gcc 4.7 got compiler warnings, because it picked
the enum to be unsigned, but no unsigned value is less than 0.
Even worse:
if ((struct.member = virBlahFromString(str)) <= 0)
goto error;
is silently compiled without warning, but incorrectly treats -1
from a bad parse as a large positive number with no warning; and
without the compiler's help to find these instances, it is a
nightmare to maintain correctly. We could force signed enums
with a dummy negative declaration in each enum, or cast the
result of virBlahFromString back to int after assigning to an
enum value, or use a temporary int for collecting results from
virBlahFromString, but those actions are all uglier than what we
were trying to cure by directly using enum types for struct
values in the first place. It's better off to just live with int
members, and use 'switch ((virFoo) struct.member)' where we want
the compiler to help, than to track down all the conversions from
string to enum and ensure they don't suffer from type problems.
* src/util/virstorageencryption.h: Revert back to int declarations
with comment about enum usage.
* src/util/virstoragefile.h: Likewise.
* src/conf/domain_conf.c: Restore back to casts in switches.
* src/qemu/qemu_driver.c: Likewise.
* src/qemu/qemu_command.c: Add cast rather than revert.
Signed-off-by: Eric Blake <eblake@redhat.com>
For internal structs, we might as well be type-safe and let the
compiler help us with less typing required on our part (getting
rid of casts is always nice). In trying to use enums directly,
I noticed two problems in virstoragefile.h that can't be fixed
without more invasive refactoring: virStorageSource.format is
used as more of a union of multiple enums in storage volume
code (so it has to remain an int), and virStorageSourcePoolDef
refers to pooltype whose enum is declared in src/conf, but where
src/util can't pull in headers from src/conf.
* src/util/virstoragefile.h (virStorageNetHostDef)
(virStorageSourcePoolDef, virStorageSource): Use enums instead of
int for fields of internal types.
* src/qemu/qemu_command.c (qemuParseCommandLine): Cover all values.
* src/conf/domain_conf.c (virDomainDiskSourceParse)
(virDomainDiskSourceFormat): Simplify clients.
* src/qemu/qemu_driver.c
(qemuDomainSnapshotCreateSingleDiskActive)
(qemuDomainSnapshotPrepareDiskExternalBackingInactive)
(qemuDomainSnapshotPrepareDiskExternalOverlayActive)
(qemuDomainSnapshotPrepareDiskInternal): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
One caveat though, qemu-ga is expecting time and returning time
in nanoseconds. With all the buffering and propagation delay, the
time is already wrong once it gets to the qemu-ga, but there's
nothing we can do about it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Coverity complains about event being leaked in
qemuDomainCheckRemoveOptionalDisk. The best fix for it is to remove the
disk directly since we already know its index.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In "src/conf/" there are many enumeration (enum) declarations.
Similar to the recent cleanup to "src/util" directory, it's
better to use a typedef for variable types, function types and
other usages. Other enumeration and folders will be changed to
typedef's in the future. Most of the files changed in this
commit are related to storage (storage_conf) enums.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
When qemu driver is polling for migration to finish (in
qemuMigrationWaitForCompletion), it may happen that another job allowed
during migration is running and if it does not finish within 30 seconds,
migration would be cancelled because of that. However, we can just
ignore the timeout and let the waiting loop try again later.
If an event fired at the end of migration is ever implemented in QEMU,
we can just wait for the event instead of polling for migration status
and libvirt will behave consistently, i.e., migration won't be cancelled
in case another job started during migration takes long time to finish.
For bug https://bugzilla.redhat.com/show_bug.cgi?id=1083238
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
As a side effect, the return value of qemuDomainObjEnterMonitorAsync is
not directly used as the return value of qemuProcess{Start,Stop}CPUs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If job queue is full or waiting for a job times out, the function
returns -2 so that it can be handled in a different way by callers.
The change is safe since all existing callers of
qemuDomainObjBeginNestedJob check the return value to be less than zero.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If the compression program for external snapshot memory image isn't
found we exitted the function without terminating the domain job. This
caused the domain to be unusable.
The problem was introduced in commit 7df5093f.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1097503
Move sharable PCI handling functions to domain_addr.[ch], and
change theirs prefix from 'qemu' to 'vir':
- virDomainPCIAddressAsString;
- virDomainPCIAddressBusSetModel;
- virDomainPCIAddressEnsureAddr;
- virDomainPCIAddressFlagsCompatible;
- virDomainPCIAddressGetNextSlot;
- virDomainPCIAddressReleaseSlot;
- virDomainPCIAddressReserveAddr;
- virDomainPCIAddressReserveNextSlot;
- virDomainPCIAddressReserveSlot;
- virDomainPCIAddressSetFree;
- virDomainPCIAddressSetGrow;
- virDomainPCIAddressSlotInUse;
- virDomainPCIAddressValidate;
The only change here is function names, the implementation itself
stays untouched.
Extract common allocation code from DomainPCIAddressSetCreate
into virDomainPCIAddressSetAlloc.
Introduce new files (domain_addr.[ch]) to provide
an API for domain device handling that could be
shared across the drivers.
A list of data types were extracted and moved there:
qemuDomainPCIAddressBus -> virDomainPCIAddressBus
qemuDomainPCIAddressBusPtr -> virDomainPCIAddressBusPtr
_qemuDomainPCIAddressSet -> virDomainPCIAddressSet
qemuDomainPCIAddressSetPtr -> virDomainPCIAddressSetPtr
qemuDomainPCIConnectFlags -> virDomainPCIConnectFlags
Also, move the related definitions and macros.
https://bugzilla.redhat.com/show_bug.cgi?id=1002813
If qemuDomainBlockResize() is passed a size not on a KiB boundary - that
is passed a size based in bytes (VIR_DOMAIN_BLOCK_RESIZE_BYTES), then
depending on the source format (qcow2 or qed), the value passed must
be on a sector (or 512 byte) boundary. Since other libvirt code quietly
adjusts the capacity values, then do so here as well.
With this patch, virDomainFSFreeze will pass the mountpoints argument
to qemu guest agent. For example,
virDomainFSFreeze(dom, {"/mnt/vol1", "/mnt/vol2"}, 2, 0)
will issue qemu guest agent command:
{"execute":"guest-fsfreeze-freeze",
"arguments":{"mountpoints":["/mnt/vol1","/mnt/vol2"]}}
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Acked-by: Daniel P. Berrange <berrange@redhat.com>
Use qemuDomainSnapshotFSFreeze() and qemuDomainSnapshotFSFThaw() which are
already implemented for snapshot quiescing.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
"Freezed" is not an English word.
* src/lxc/lxc_driver.c (lxcFreezeContainer): Fix typo.
* src/qemu/qemu_driver.c (qemuDomainSnapshotFSFreeze): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1002813
If qemuDomainBlockResize() is passed a size not on a KiB boundary - that
is passed a size based in bytes (VIR_DOMAIN_BLOCK_RESIZE_BYTES), then
depending on the source format (qcow2 or qed), the value passed must
be on a sector (or 512 byte) boundary. Since other libvirt code quietly
adjusts the capacity values, then do so here as well - of course ensuring
that adjustment still fits.
Signed-off-by: John Ferlan <jferlan@redhat.com>
QEMU commit 5e2ac51 added a boolean '-msg timestamp=[on|off]'
option, which can enable timestamps on errors:
$ qemu-system-x86_64 -msg timestamp=on zghhdorf
2014-04-09T13:25:46.779484Z qemu-system-x86_64: -msg timestamp=on: could
not open disk image zghhdorf: Could not open 'zghhdorf': No such file or
directory
Enable this timestamp if the QEMU binary supports it.
Add a 'log_timestamp' option to qemu.conf for disabling this behavior.
Adds 'quiesced' status into qemuDomainObjPrivate that tracks whether
FSFreeze is requested in the domain.
It modifies error code from qemuDomainSnapshotFSFreeze and
qemuDomainSnapshotFSThaw, so that a caller can know whether the command is
actually sent to the guest agent. If the error is caused before sending a
freeze command, a counterpart thaw command shouldn't be sent either, not to
confuse fsfreeze status tracking.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This uses the new QEMU_CAPS_HOST_PCI_MULTIDOMAIN capability when
present, for -devivce pci-assign, -device vfio-pci, and -pcidevice.
While creating tests for this new functionality, I noticed that the
xmls for two existing tests had erroneously specified an
until-now-ignored domain="0x0002", so I corrected those two tests, and
also added two failure tests to be sure that we alert users who
attempt to use a non-zero domain with a qemu that doesn't support it.
Quite a long time ago, (apparently between qemu 0.12 and 0.13) qemu
quietly began supporting the optional specification of a domain in the
host-side address of all pci passthrough commands (by simply
prepending it to the bus:slot.function format, as
"dddd:bb:ss.f"). Since machines with multiple PCI domains are very
rare, this never came up in practice, so libvirt was never updated to
support it.
This patch takes the first step to supporting specification of a non-0
domain in the host-side address of PCI devices being assigned to a
domain, by adding a capability bit to indicate support
"QEMU_CAPS_HOST_PCI_MULTIDOMAIN", and detect it. Since this support
was added in a version prior to the minimum version required for
QMP-style capabilities detection, the capability is always enabled for
any qemu that uses QMP for capabilities detection. For older qemus,
the only clue that a domain can be specified in the host pci address
is the presence of the string "[seg:]" in the help string for
-pcidevice. (Ironically, libvirt will not be modified to support
specification of domain for -pcidevice, since any qemu new enough for
us to care about also supports "-device pci-assign" or "-device
vfio-pci", which are greatly preferred).
In "src/util/" there are many enumeration (enum) declarations.
Sometimes, it's better using a typedef for variable types,
function types and other usages. Other enumeration will be
changed to typedef's in the future.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
A couple of places in the QEMU XML -> ARGV conversion code
raised an error but then forgot to return an error status
due to missing gotos. While fixing this also tweak style
of a couple of other error reports
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If a domain network interface that contains a <filterref> is modified
"live" using "virsh update-device --live", libvirtd would crash. This
was because the code supporting live update of an interface's
filterref was assuming that a filterref might be added or modified,
but didn't account for removing the filterref, resulting in a null
dereference of the filter name.
Introduced with commit 258fb278, which was first in libvirt v1.0.1.
This addresses https://bugzilla.redhat.com/show_bug.cgi?id=1093301
To avoid memory leak of the "backingStoreRaw" field when reparsing
backing chains a new function is being introduced by this patch that
shall be used to clear backing store information.
The memory leak was introduced in commit 8823272d41.
This commit provides the ability to virDomainMigrateToURI to
check for SASL credentials when attempts to migrate a domain
with the driver QEMU.
Signed-off-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@cloudwatt.com>
When EIO comes to qemu while it's replying to
qemuMigrationUpdateJobStatus(), qemu blocks, the migration of RAM can
complete in the meantime, and when qemu unblocks, it sends us
BLOCK_IO_ERROR plus migrations "status": "complete". Even though we
act upon the BLOCK_IO_ERROR by setting the proper state of the domain,
the call still waits for the proper reply on monitor for query_migrate
and after it gets it, it checks that migration is completed and the
migration is finished. This is what abort_on_error flag was meant for
(we can migrate with these errors, but this flag must inhibit such
behaviour). Changing the order of the steps guarantees the flag works
properly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1045833
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Convert all remaining clients of readdir to use the new
interface, so that we can ensure (unlikely) errors while
reading a directory are reported.
* src/openvz/openvz_conf.c (openvzAssignUUIDs): Use new
interface.
* src/parallels/parallels_storage.c (parallelsFindVolumes)
(parallelsFindVmVolumes): Report readdir failures.
* src/qemu/qemu_driver.c (qemuDomainSnapshotLoad): Ignore readdir
failures.
* src/secret/secret_driver.c (loadSecrets): Likewise.
* src/qemu/qemu_hostdev.c
(qemuHostdevHostSupportsPassthroughVFIO): Report readdir failures.
* src/xen/xen_inotify.c (xenInotifyOpen): Likewise.
* src/xen/xm_internal.c (xenXMConfigCacheRefresh): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
When a snapshot operation finishes we have to recheck the backing chain
of all disks involved in the snapshot. And we need to do that even if
the operation failed because some of the disks might have changed if
QEMU did not support transactions.
The check for a network being active during interface attach was being
done individually in several places (by both the lxc driver and the
qemu driver), but those places were too specific, leading to it *not*
being checked when allocating a connection/device from a macvtap or
hostdev network.
This patch puts a single check in networkAllocateActualDevice(), which
is always called before the any network interface is attached to any
type of domain. It also removes all the other now-redundant checks
from the lxc and qemu drivers.
NB: the following patches are prerequisites for this patch, in the
case that it is backported to any branch:
440beeb network: fix virNetworkObjAssignDef and persistence
8aaa5b6 network: create statedir during driver initialization
b9e9549 network: change location of network state xml files
411c548 network: set macvtap/hostdev networks active if their state
file exists
This fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=880483
When a VM fails to launch due to error creating nwfilter
rules, we must avoid overwriting the original error when
tearing down the partially created rules.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit c4206d7 fixed the overflow for running domains. However, we need
a similar check when setting migration speed on inactive domains.
At first look, it may seem the check in c4206d7 is now redundant but
qemuDomainMigrateSetMaxSpeed is not the only caller of
qemuMonitorSetMigrationSpeed so we need to check the bandwidth in both
places.
https://bugzilla.redhat.com/show_bug.cgi?id=1083483
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Each backing store of a given disk is associated with a unique index
(which is also formatted in domain XML) for easier addressing of any
particular backing store. With this patch, any backing store can be
addressed by its disk target and the index. For example, "vdc[4]"
addresses the backing store with index equal to 4 of the disk identified
by "vdc" target. Such shorthand can be used in any API in place for a
backing file path:
virsh blockcommit domain vda --base vda[3] --top vda[2]
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virStorageFileChainLookup is able to give use virStorageSourcePtr which
contains the pointer to its canonical path. Let's use a more general
virStorageSourcePtr instead of just canonical path.
Former base_canon maps to baseSource->path.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virStorageFileChainLookup is able to give use virStorageSourcePtr which
contains the pointer to its canonical path. There's no need for the
caller to store both of them.
Former top_meta maps to topSource and top_canon maps to topSource->path.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Recent discussions around naming of 'pci' vs 'pci.0' for PPC
made me go back and look at the PPC emulator in every historical
version of QEMU since 1.0. The results were worse than I imagined.
This patch adds the logic required to make libvirt work with PPC
correctly with naming variations across all versions & machine
types.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To avoid having the root of a backing chain present twice in the list we
need to invert the working of virStorageFileGetMetadataRecurse.
Until now the recursive worker created a new backing chain element from
the name and other information passed as arguments. This required us to
pass the data of the parent in a deconstructed way and the worker
created a new entry for the parent.
This patch converts this function so that it just fills in metadata
about the parent and creates a backing chain element from those. This
removes the duplication of the first element.
To avoid breaking the test suite, virstoragetest now calls a wrapper
that creates the parent structure explicitly and pre-fills it with the
test data with same function signature as previously used.
Switch over to storing of the backing chain as a recursive
virStorageSource structure.
This is a string based move. Currently the first element will be present
twice in the backing chain as currently the retrieval function stores
the parent in the newly detected chain. This will be fixed later.
Remove the obsolete field replaced by data in "path".
The testsuite requires tweaking as the name of the backing file is now
stored one layer deeper in the backing chain linked list.
Currently, libvirt is using legacy USB controller as default. There
are problems with VGA which can't work correctly with USB Keyboard and
USB Mouse.
While providing -nodefaults, ppc64 should be specifying the usb
controller explicitly in place of using the legacy
controller(-usb). Qemu spapr initialization code when sees "-usb" adds a
USB Keyboard and USB Mouse by default. And libvirt has added a USB
keyboard and USB mouse.
A recent fix in the in qemu VGA code uncoverd this problem, which
resulted in addition of extra keyboard and mouse to the qemu machine.
This patch is to set pci-ohci as USB default controller.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Remove the pointer from def->cputune.vcpupin after unplugging
the CPU and also free the bitmap contained in the structure
by calling virDomainVcpuPinDel instead of VIR_FREE.
Introduced by commit 0df1a79.
This makes virDomainLookupVcpuPin redundant.
https://bugzilla.redhat.com/show_bug.cgi?id=1088165
When passing migration bandwidth to QEMU, we multiply it by 1024 * 1024
to convert the speed to B/s and the result still needs to fit in
int64_t.
https://bugzilla.redhat.com/show_bug.cgi?id=1083483
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The original chain lookup code had to pass in the starting name,
because it was not available in the chain. But now that we have
added fields to the struct, this parameter is redundant.
* src/util/virstoragefile.h (virStorageFileChainLookup): Alter
signature.
* src/util/virstoragefile.c (virStorageFileChainLookup): Adjust
handling of top of chain.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Adjust caller.
* tests/virstoragetest.c (testStorageLookup, mymain): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The chain lookup function was inconsistent on whether it left
a message in the log when looking up a name that is not found
on the chain (leaving a message for OOM or if name was
relative but not part of the chain), and could litter the log
even when successful (when name was relative but deep in the
chain, use of virFindBackingFile early in the chain would complain
about a file not found). It's easier to make the function
consistently emit a message exactly once on failure, and to let
all callers rely on the clean semantics.
* src/util/virstoragefile.c (virStorageFileChainLookup): Always
report error on failure. Simplify relative lookups.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Avoid
overwriting error.
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, virCgroupGetPercpuStats is only used by the LXC driver,
filling out the CPUTIME stats. qemuDomainGetPercpuStats does this
and also filles out VCPUTIME stats.
Extend virCgroupGetPercpuStats to also report VCPUTIME stats if
nvcpupids is non-zero. In the LXC driver, we don't have cpupids.
In the QEMU driver, there is at least one cpupid for a running domain,
so the behavior shouldn't change for QEMU either.
Also rename getSumVcpuPercpuStats to virCgroupGetPercpuVcpuSum.
Refactor the function to avoid multiple wrappers splitting identical
fields from the now common metadata struct.
The refactor is done by folding in the wrapper used for disk sources
which allows us to lookup secrets via the secret driver. This may allow
using stored secrets for snapshot disk images too in the future.
Now that we store all metadata about a storage image in a
virStorageSource struct let's use it also to store information needed by
the storage driver to access and do operations on the files.
Since it is an abbreviation, PCI should always be fully
capitalized or full lower case, never Pci.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since it is an abbreviation, USB should always be fully
capitalized or full lower case, never Usb.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since it is an abbreviation, SCSI should always be fully
capitalized or full lower case, never Scsi.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
I almost wrote a hash value free function that just called
VIR_FREE, then realized I couldn't be the first person to
do that. Sure enough, it was worth factoring into a common
helper routine.
* src/util/virhash.h (virHashValueFree): New function.
* src/util/virhash.c (virHashValueFree): Implement it.
* src/util/virobject.h (virObjectFreeHashData): New function.
* src/libvirt_private.syms (virhash.h, virobject.h): Export them.
* src/nwfilter/nwfilter_learnipaddr.c (virNWFilterLearnInit): Use
common function.
* src/qemu/qemu_capabilities.c (virQEMUCapsCacheNew): Likewise.
* src/qemu/qemu_command.c (qemuDomainCCWAddressSetCreate):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorGetBlockInfo): Likewise.
* src/qemu/qemu_process.c (qemuProcessWaitForMonitor): Likewise.
* src/util/virclosecallbacks.c (virCloseCallbacksNew): Likewise.
* src/util/virkeyfile.c (virKeyFileParseGroup): Likewise.
* tests/qemumonitorjsontest.c
(testQemuMonitorJSONqemuMonitorJSONGetBlockInfo): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
nmdm is a FreeBSD driver which allows to create a pair of tty
devices one of which is passed to the guest and second is used
by the client.
This patch adds new 'nmdm' character device type. Its definition
looks this way:
<serial type='nmdm'>
<source master='/dev/nmdm0A' slave='/dev/nmdm0B'/>
</serial>
Master is passed to the hypervisior and slave is used for client
connection.
Also implement domainOpenConsole() for bhyve driver based on that.
Right now, virStorageFileMetadata tracks bool backingStoreIsFile
for whether the backing string specified in metadata can be
resolved as a file (covering both block and regular file
resources) or is treated as a network protocol. But when
merging this struct with virStorageSource, it will be easier
to just actually track which type of resource it is, as well
as have a reserved value for the case where the resource type
is unknown (or had an error during probing).
* src/util/virstoragefile.h (virStorageType): Add a placeholder
value, swap order to match similar public enum.
* src/util/virstoragefile.c (virStorage): Update string mapping.
* src/conf/domain_conf.c (virDomainDiskSourceParse)
(virDomainDiskDefParseXML, virDomainDiskDefFormat)
(virDomainDiskSourceFormat): Adjust clients.
* src/conf/snapshot_conf.c (virDomainSnapshotDiskDefParseXML):
Likewise.
* src/qemu/qemu_driver.c
(qemuDomainSnapshotPrepareDiskExternalBackingInactive)
(qemuDomainSnapshotPrepareDiskExternalOverlayActive)
(qemuDomainSnapshotPrepareDiskExternalOverlayInactive)
(qemuDomainSnapshotPrepareDiskInternal)
(qemuDomainSnapshotCreateSingleDiskActive): Likewise.
* src/qemu/qemu_command.c (qemuGetDriveSourceString): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 5b3492fa aimed to fix this and caught one error but exposed
another one. When agent command is being executed and the thread
waiting for the reply is woken up by an event (e.g. EOF in case of
shutdown), the command finishes with no data (rxObject == NULL), but
no error is reported, since this might be desired by the caller
(e.g. suspend through agent). However, in other situations, when the
data are required (e.g. getting vCPUs), we proceed to getting desired
data out of the reply, but none of the virJSON*() functions works well
with NULLs. I chose the way of a new parameter for qemuAgentCommand()
function that specifies whether reply is required and behaves
according to that.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1058149
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Every caller checked the return value and logged an error
- one if no device with the specified MAC was found,
other if there were multiple devices matching the MAC address
(except for qemuDomainUpdateDeviceConfig which logged the same
message in both cases).
Move the error reporting into virDomainNetFindIdx, since in both cases,
we couldn't find one single match - it's just the error messages that
differ.
On all the places where qemuAgentComand() was called, we did a check
for errors in the reply. Unfortunately, some of the places called
qemuAgentCheckError() without checking for non-null reply which might
have resulted in a crash.
So this patch makes the error-checking part of qemuAgentCommand()
itself, which:
a) makes it look better,
b) makes the check mandatory and, most importantly,
c) checks for the errors if and only if it is appropriate.
This actually fixes a potential crashers when qemuAgentComand()
returned 0, but reply was NULL. Having said that, it *should* fix the
following bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1058149
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Now that we have a common struct, it's time to start using it!
Since external snapshots make a longer backing chain, it is
only natural to use the same struct for the file created by
the snapshot as what we use for <domain> disks.
* src/conf/snapshot_conf.h (_virDomainSnapshotDiskDef): Use common
struct instead of open-coded duplicate fields.
* src/conf/snapshot_conf.c (virDomainSnapshotDiskDefClear)
(virDomainSnapshotDiskDefParseXML, virDomainSnapshotAlignDisks)
(virDomainSnapshotDiskDefFormat)
(virDomainSnapshotDiskGetActualType): Adjust clients.
* src/qemu/qemu_conf.c (qemuTranslateSnapshotDiskSourcePool):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiskGetSourceString)
(qemuDomainSnapshotCreateInactiveExternal)
(qemuDomainSnapshotPrepareDiskExternalOverlayActive)
(qemuDomainSnapshotPrepareDiskExternal)
(qemuDomainSnapshotPrepare)
(qemuDomainSnapshotCreateSingleDiskActive): Likewise.
* src/storage/storage_driver.c
(virStorageFileInitFromSnapshotDef): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Move some functions out of domain_conf for use in the next
patch where snapshot starts to directly use structs in
virstoragefile.
* src/conf/domain_conf.c (virDomainDiskDefFree)
(virDomainDiskSourcePoolDefParse): Adjust callers.
(virDomainDiskSourceDefClear, virDomainDiskSourcePoolDefFree)
(virDomainDiskAuthClear): Move...
* src/util/virstoragefile.c (virStorageSourceClear)
(virStorageSourcePoolDefFree, virStorageSourceAuthClear): ...and
rename.
* src/conf/domain_conf.h (virDomainDiskAuthClear): Drop
declaration.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePool): Adjust
caller.
* src/util/virstoragefile.h: Declare them.
* src/libvirt_private.syms (virstoragefile.h): Export them.
Signed-off-by: Eric Blake <eblake@redhat.com>
The code in virstoragefile.c is getting more complex as I
consolidate backing chain handling code. But for the setuid
virt-login-shell, we don't need to crawl backing chains. It's
easier to audit things for setuid security if there are fewer
files involved, so this patch moves the one function that
virFileOpen() was actually relying on to also live in virfile.c.
* src/util/virstoragefile.c (virStorageFileIsSharedFS)
(virStorageFileIsSharedFSType): Move...
* src/util/virfile.c (virFileIsSharedFS, virFileIsSharedFSType):
...to here, and rename.
(virFileOpenAs): Update caller.
* src/security/security_selinux.c
(virSecuritySELinuxSetFileconHelper)
(virSecuritySELinuxSetSecurityAllLabel)
(virSecuritySELinuxRestoreSecurityImageLabelInt): Likewise.
* src/security/security_dac.c
(virSecurityDACRestoreSecurityImageLabelInt): Likewise.
* src/qemu/qemu_driver.c (qemuOpenFileAs): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsSafe): Likewise.
* src/util/virstoragefile.h: Adjust declarations.
* src/util/virfile.h: Likewise.
* src/libvirt_private.syms (virfile.h, virstoragefile.h): Move
symbols as appropriate.
Signed-off-by: Eric Blake <eblake@redhat.com>
This one is a relatively easy move. We don't ever convert the
enum to or from strings (it is inferred from other elements in
the xml, rather than directly represented).
* src/conf/domain_conf.h (virDomainDiskSecretType): Move...
* src/util/virstoragefile.h (virStorageSecreteType): ...and
rename.
* src/conf/domain_conf.c (virDomainDiskSecretType): Drop unused
enum conversion.
(virDomainDiskAuthClear, virDomainDiskDefParseXML)
(virDomainDiskDefFormat): Adjust clients.
* src/qemu/qemu_command.c (qemuGetSecretString): Likewise.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePoolAuth):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Another struct being moved to util. This one doesn't have as
much use yet, thankfully.
* src/conf/domain_conf.h (virDomainDiskSourcePoolMode)
(virDomainDiskSourcePoolDef): Move...
* src/util/virstoragefile.h (virStorageSourcePoolMode)
(virStorageSourcePoolDef): ...and rename.
* src/conf/domain_conf.c (virDomainDiskSourcePoolDefFree)
(virDomainDiskSourceDefClear, virDomainDiskSourcePoolDefParse)
(virDomainDiskDefParseXML, virDomainDiskSourceDefParse)
(virDomainDiskSourceDefFormatInternal)
(virDomainDiskDefForeachPath, virDomainDiskSourceIsBlockType):
Adjust clients.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePool): Likewise.
* src/libvirt_private.syms (domain_conf.h): Move symbols...
(virstoragefile.h): ...as appropriate.
Signed-off-by: Eric Blake <eblake@redhat.com>
In order to reuse the newly-created host-side disk struct in
the virstoragefile backing chain code, I first have to move
it to util/. This starts the process, by first moving the
security label structures.
* src/conf/domain_conf.h (virDomainDefGenSecurityLabelDef)
(virDomainDiskDefGenSecurityLabelDef, virSecurityLabelDefFree)
(virSecurityDeviceLabelDefFree, virSecurityLabelDef)
(virSecurityDeviceLabelDef): Move...
* src/util/virseclabel.h: ...to new file.
(virSecurityLabelDefNew, virSecurityDeviceLabelDefNew): Rename the
GenSecurity functions.
* src/qemu/qemu_process.c (qemuProcessAttach): Adjust callers.
* src/security/security_manager.c (virSecurityManagerGenLabel):
Likewise.
* src/security/security_selinux.c
(virSecuritySELinuxSetSecurityFileLabel): Likewise.
* src/util/virseclabel.c: New file.
* src/conf/domain_conf.c: Move security code, and fix fallout.
* src/Makefile.am (UTIL_SOURCES): Build new file.
* src/libvirt_private.syms (domain_conf.h): Move symbols...
(virseclabel.h): ...to new section.
Signed-off-by: Eric Blake <eblake@redhat.com>
While running qemucaps2xmltest, it was found that valgrind pointed out
the following memory leaks:
==29896== 0 bytes in 1 blocks are definitely lost in loss record 1 of 65
==29896== at 0x4A0577B: calloc (vg_replace_malloc.c:593)
==29896== by 0x4C6B45E: virAllocN (viralloc.c:191)
==29896== by 0x4232A9: virQEMUCapsGetMachineTypesCaps (qemu_capabilities.c:1999)
==29896== by 0x4234E7: virQEMUCapsInitGuestFromBinary (qemu_capabilities.c:789)
==29896== by 0x41F10B: testQemuCapsXML (qemucaps2xmltest.c:118)
==29896== by 0x41FFD1: virtTestRun (testutils.c:201)
==29896== by 0x41EE7A: mymain (qemucaps2xmltest.c:203)
==29896== by 0x42074D: virtTestMain (testutils.c:789)
==29896== by 0x3E6CE1ED1C: (below main) (libc-start.c:226)
==29896==
==29896== 0 bytes in 1 blocks are definitely lost in loss record 2 of 65
==29896== at 0x4A0577B: calloc (vg_replace_malloc.c:593)
==29896== by 0x4C6B45E: virAllocN (viralloc.c:191)
==29896== by 0x4232A9: virQEMUCapsGetMachineTypesCaps (qemu_capabilities.c:1999)
==29896== by 0x4234E7: virQEMUCapsInitGuestFromBinary (qemu_capabilities.c:789)
==29896== by 0x41F10B: testQemuCapsXML (qemucaps2xmltest.c:118)
==29896== by 0x41FFD1: virtTestRun (testutils.c:201)
==29896== by 0x41EEA3: mymain (qemucaps2xmltest.c:204)
==29896== by 0x42074D: virtTestMain (testutils.c:789)
==29896== by 0x3E6CE1ED1C: (below main) (libc-start.c:226)
Signed-off-by: Eric Blake <eblake@redhat.com>
In all other drivers we are doing so. Moreover, we don't want to parse
runtime information in attach (even if the attach is meant as live)
because we are generating the runtime info ourselves. We can't trust
users they supply sane values anyway.
==1140== 9 bytes in 1 blocks are definitely lost in loss record 72 of 1,151
==1140== at 0x4A06C2B: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==1140== by 0x623C758: xmlStrndup (in /usr/lib64/libxml2.so.2.9.1)
==1140== by 0x50FD763: virXMLPropString (virxml.c:483)
==1140== by 0x510F8B7: virDomainDeviceInfoParseXML (domain_conf.c:3685)
==1140== by 0x511ACFD: virDomainChrDefParseXML (domain_conf.c:7535)
==1140== by 0x5121D13: virDomainDeviceDefParse (domain_conf.c:9918)
==1140== by 0x13AE6313: qemuDomainAttachDeviceFlags (qemu_driver.c:6926)
==1140== by 0x13AE65FA: qemuDomainAttachDevice (qemu_driver.c:7005)
==1140== by 0x51C77DA: virDomainAttachDevice (libvirt.c:10231)
==1140== by 0x127FDD: remoteDispatchDomainAttachDevice (remote_dispatch.h:2404)
==1140== by 0x127EC5: remoteDispatchDomainAttachDeviceHelper (remote_dispatch.h:2382)
==1140== by 0x5241F81: virNetServerProgramDispatchCall (virnetserverprogram.c:437)
When doing live attach, we are passing the inactive definition anyway
since we are passing the result of virDomainDeviceDefCopy() which does
inactive copy by default.
Moreover, we are doing the same mistake in qemuhotplugtest.
Just a side note - it makes perfect sense to parse the runtime info
like alias in qemuDomainDetachDevice and qemuDomainUpdateDeviceFlags()
as in some cases the only difference to distinguish two devices can be
just their alias.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds an element to QEMU's capability XML, to
show if the underlying QEMU binary supports the live disk
snapshotting or not.
This allows any client to know ahead of time if the feature
is available.
Without this information available, the only way to check
for the snapshot support is to request one and check for
errors.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Currently, the Linux kernel treats values of '0' and '1' as
the minimum of 2. Values larger than the maximum are changed
to the maximum.
Re-reading the shares value after setting it reflects this in
the live domain XML.
Currently, <cputune><shares>0</shares></cputune> is treated
as if it were not specified.
Treat is as a valid value if it was explicitly specified
and write it to the cgroups.
qemuDomainSetSchedulerParametersFlags() calls virQEMUDriverGetConfig() twice
and makes the reference counter leak. This removes redundant call.
Problem introduced in commit 45ad1ad
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch adds qemuMonitorGetDumpGuestMemoryCapability, which is used to check
whether the specified dump-guest-memory format is supported by qemu.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
It's finally time to start tracking disk backing chains in
<domain> XML. The first step is to start refactoring code
so that we have an object more convenient for representing
each host source resource in the context of a single guest
<disk>. Ultimately, I plan to move the new type into src/util
where it can be reused by virStorageFile, but to make the
transition easier to review, this patch just creates the
new type then fixes everything until it compiles again.
* src/conf/domain_conf.h (_virDomainDiskDef): Split...
(_virDomainDiskSourceDef): ...to new struct.
(virDomainDiskAuthClear): Use new type.
* src/conf/domain_conf.c (virDomainDiskDefFree): Split...
(virDomainDiskSourceDefClear): ...to new function.
(virDomainDiskGetType, virDomainDiskSetType)
(virDomainDiskGetSource, virDomainDiskSetSource)
(virDomainDiskGetDriver, virDomainDiskSetDriver)
(virDomainDiskGetFormat, virDomainDiskSetFormat)
(virDomainDiskAuthClear, virDomainDiskGetActualType)
(virDomainDiskDefParseXML, virDomainDiskSourceDefFormat)
(virDomainDiskDefFormat, virDomainDiskDefForeachPath)
(virDomainDiskDefGetSecurityLabelDef)
(virDomainDiskSourceIsBlockType): Adjust all users.
* src/lxc/lxc_controller.c (virLXCControllerSetupDisk):
Likewise.
* src/lxc/lxc_driver.c (lxcDomainAttachDeviceMknodHelper):
Likewise.
* src/qemu/qemu_command.c (qemuAddRBDHost, qemuParseRBDString)
(qemuParseDriveURIString, qemuParseGlusterString)
(qemuParseISCSIString, qemuParseNBDString)
(qemuDomainDiskGetSourceString, qemuBuildDriveStr)
(qemuBuildCommandLine, qemuParseCommandLineDisk)
(qemuParseCommandLine): Likewise.
* src/qemu/qemu_conf.c (qemuCheckSharedDevice)
(qemuAddISCSIPoolSourceHost, qemuTranslateDiskSourcePool):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainUpdateDeviceConfig)
(qemuDomainPrepareDiskChainElement)
(qemuDomainSnapshotCreateInactiveExternal)
(qemuDomainSnapshotPrepareDiskExternalBackingInactive)
(qemuDomainSnapshotPrepareDiskInternal)
(qemuDomainSnapshotPrepare)
(qemuDomainSnapshotCreateSingleDiskActive)
(qemuDomainSnapshotUndoSingleDiskActive)
(qemuDomainBlockPivot, qemuDomainBlockJobImpl)
(qemuDomainBlockCopy, qemuDomainBlockCommit): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsSafe): Likewise.
* src/qemu/qemu_process.c (qemuProcessGetVolumeQcowPassphrase)
(qemuProcessInitPasswords): Likewise.
* src/security/security_selinux.c
(virSecuritySELinuxSetSecurityFileLabel): Likewise.
* src/storage/storage_driver.c (virStorageFileInitFromDiskDef):
Likewise.
* tests/securityselinuxlabeltest.c (testSELinuxLoadDef):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
It's easy to shed the daemon these days. With this XML snippet:
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/some/dummy/path/test.bin'>
<seclabel model='dac' relabel='no'/>
</source>
<target dev='vdb' bus='virtio'/>
<readonly/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
</disk>
I get the SIGSEGV when starting the domain. The thing is, when
starting a domain, we check for its disk presence. For some reason,
when determining the disk chain, we parse the <seclabel/> (don't ask
me why). However, there's no label attribute in the XML, so we end up
calling virParseOwnershipIds() over NULL string:
[Switching to Thread 0x7ffff10c4700 (LWP 30956)]
__strchr_sse42 () at ../sysdeps/x86_64/multiarch/strchr.S:136
136 ../sysdeps/x86_64/multiarch/strchr.S: No such file or directory.
(gdb) bt
#0 __strchr_sse42 () at ../sysdeps/x86_64/multiarch/strchr.S:136
#1 0x00007ffff749f800 in virParseOwnershipIds (label=0x0, uidPtr=uidPtr@entry=0x7ffff10c2df0, gidPtr=gidPtr@entry=0x7ffff10c2df4) at util/virutil.c:2115
#2 0x00007fffe929f006 in qemuDomainGetImageIds (gid=0x7ffff10c2df4, uid=0x7ffff10c2df0, disk=0x7fffe40cb000, vm=0x7fffe40a6410, cfg=0x7fffe409ae00) at qemu/qemu_domain.c:2385
#3 qemuDomainDetermineDiskChain (driver=driver@entry=0x7fffe40120e0, vm=vm@entry=0x7fffe40a6410, disk=disk@entry=0x7fffe40cb000, force=force@entry=false) at qemu/qemu_domain.c:2414
#4 0x00007fffe929f128 in qemuDomainCheckDiskPresence (driver=driver@entry=0x7fffe40120e0, vm=vm@entry=0x7fffe40a6410, cold_boot=cold_boot@entry=true) at qemu/qemu_domain.c:2250
#5 0x00007fffe92b6fc8 in qemuProcessStart (conn=conn@entry=0x7fffd4000b60, driver=driver@entry=0x7fffe40120e0, vm=vm@entry=0x7fffe40a6410, migrateFrom=migrateFrom@entry=0x0, stdin_fd=stdin_fd@entry=-1, stdin_path=stdin_path@entry=0x0, snapshot=snapshot@entry=0x0,
vmop=vmop@entry=VIR_NETDEV_VPORT_PROFILE_OP_CREATE, flags=flags@entry=1) at qemu/qemu_process.c:3813
#6 0x00007fffe93087e8 in qemuDomainObjStart (conn=0x7fffd4000b60, driver=driver@entry=0x7fffe40120e0, vm=vm@entry=0x7fffe40a6410, flags=flags@entry=0) at qemu/qemu_driver.c:6051
#7 0x00007fffe9308e32 in qemuDomainCreateWithFlags (dom=0x7fffcc000d50, flags=0) at qemu/qemu_driver.c:6105
#8 0x00007ffff753c5cc in virDomainCreate (domain=domain@entry=0x7fffcc000d50) at libvirt.c:8861
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Busy enterprise workloads hosted on large sized VM's tend to dirty
memory faster than the transfer rate achieved via live guest migration.
Despite some good recent improvements (& using dedicated 10Gig NICs
between hosts) the live migration may NOT converge.
Recently support was added in qemu (version 1.6) to allow a user to
choose if they wish to force convergence of their migration via a
new migration capability : "auto-converge". This feature allows for qemu
to auto-detect lack of convergence and trigger a throttle-down of the
VCPUs.
This patch includes the libvirt support needed to trigger this
feature. (Testing is in progress)
Signed-off-by: Chegu Vinod <chegu_vinod@hp.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When checking compatibility of a device with a domain definition, we
should know what we're going to do with the device. Because we may need
to check for different things when we're attaching a new device versus
detaching an existing device.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
A device needs to be checked for compatibility with the domain
definition it corresponds to. Specifically, for VIR_DOMAIN_AFFECT_CONFIG
case we should check against persistent def rather than active def.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=844378
When qemu dies early after connecting to its monitor but before we
actually try to read something from the monitor, we would just fail
domain start with useless message:
"An error occurred, but the cause is unknown"
This is because the real error gets reported in a monitor EOF handler
executing within libvirt's event loop.
The fix is to take any error set in qemuMonitor structure and propagate
it into the thread-local error when qemuMonitorClose is called and no
thread-local error is set.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Wire up all the pieces to send arbitrary qemu events to a
client using libvirt-qemu.so. If the extra bookkeeping of
generating event objects even when no one is listening turns
out to be noticeable, we can try to further optimize things
by adding a counter for how many connections are using events,
and only dump events when the counter is non-zero; but for
now, I didn't think it was worth the code complexity.
* src/qemu/qemu_driver.c
(qemuConnectDomainQemuMonitorEventRegister)
(qemuConnectDomainQemuMonitorEventDeregister): New functions.
* src/qemu/qemu_monitor.h (qemuMonitorEmitEvent): New prototype.
(qemuMonitorDomainEventCallback): New typedef.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONIOProcessEvent):
Report events.
* src/qemu/qemu_monitor.c (qemuMonitorEmitEvent): New function, to
pass events through.
* src/qemu/qemu_process.c (qemuProcessHandleEvent): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Valgrind reported leaking of maxCpus and arch strings from
virXPathString, as well as the leak of the machineMaxCpus array.
Don't use 'str' for the strings we don't want to free, to allow
freeing of 'str' in the cleanup label and free machineMaxCpus
in virCapsReset too.
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As part of the goal to get away from doing string matching on
filenames when deciding whether to emit a log message, turn
the virLogSource enum into a struct which contains a log
"name". There will eventually be one virLogSource instance
statically declared per source file. To minimise churn in this
commit though, a single global instance is used.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The dtrace probe macros rely on the logging API. We can't make
the internal.h header include the virlog.h header though since
that'd be a circular include. Instead simply split the dtrace
probes into their own header file, since there's no compelling
reason for them to be in the main internal.h header.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We allow translation from no_bandwidth to has_bandwidth for a vnic.
However, going in the opposite direction is not implemented. It's not
limitation of the API rather than internal implementation. The problem
is, we correctly detect that user hasn't specified any outbound (say
he wants to clear out outbound). However, this gets overwritten by
current vnic outbound settings. Then, virNetDevBandwidthSet doesn't
change anything. We need to stop overwriting the outbound if users
don't want us to. Same applies for inbound.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If there should be some sort of separator it is better to use comment
with the filename, copyright, description, license information and
authors.
Found by:
git grep -nH '^$' | grep '\.[ch]:1:'
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch is not trying to fix every switch, just the ones I worked
with last time, because some of these were especially unreadable.
Covers enums virDomainGraphicsType and virDomainChrType (where
applicable).
Also sort its cases by their value.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit a1cbe4b5 added a check for spaces around assignments and this
patch extends it to checks for spaces around '=='. One exception is
virAssertCmpInt where comma after '==' is acceptable (since it is a
macro and '==' is its argument).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Coverity found an issue in lxc_driver and uml_driver that we don't
check the return value of register functions.
I've also updated all other places and unify the way we check the
return value.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Right now we are parsing the XML as though it's live, which for example
will choke on hardcoded XML like:
<seclabel type='dynamic' model='selinux' relabel='yes'/>
Erroring with:
$ sudo virsh domxml-to-native qemu-argv f
error: XML error: security label is missing
All drivers are fixed, but only qemu was tested.
We have to explicitly destroy TAP devices on FreeBSD because
they're not freed after being closed, otherwise we end up with
orphaned TAP devices after destroying a domain.
Many of the domain xml format functions (including all of the device
format functions) had hard-coded spaces, which made for incorrect
indentation when those functions were called in a different context
(for example, commit 2122cf39 added <interface> XML into the document
provided to a network hook script, and in this case it should have
been indented by 2 spaces, but was instead indented by 6 spaces).
To make it possible to insert a properly indented device anywhere into
an XML document, this patch removes hardcoded spaces from the
formatting functions, and calls virBufferAdjustIndent() at appropriate
places instead. (a regex search of domain_conf.c was done to assure
that all occurrences of hardcoded spaces were removed).
virDomainDiskSourceDefFormatInternal() is also called from
snapshot_conf.c, so two virBufferAdjustIndent() calls were temporarily
added around that call - those functions will have hardcoded spaces
removed in a separate patch.
This could cause some conflicts when backporting future changes to the
formatting functions to older branches, but fortunately the changes
are almost all trivial, so conflict resolution will be obvious.
When I played with virtlockd I was stunned by lacking
documentation. My frustration got bigger when I had to
read the patches to get the correct value to set in
qemu.conf.
Moreover, from pure libvirt-pride I'm changing commented
value from sanlock to lockd. We want to favor our own
implementation after all.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The kernel didn't support the unprivileged SGIO for SCSI generic
device finally, and since it's unknow whether the way to support
unprivileged SGIO for SCSI generic device will be similar as for
SCSI block device or not, even it's simliar (I.e. via sysfs, for
SCSI block device, it's /sys/dev/block/8\:0/queue/unpriv_sgio,
for example), the file name might be different, So it's better not
guess what it should be like currently.
This patch removes the related code (mainly about the "shareable"
checking on the "sgio" setting, it's not supported at all, why
we leave checking code there? :-), and error out if "sgio" is
specified in the domain config.
Changes parameter from vm def to specific hostdevs info and name info, so that
it could be used more widely, e.g, could be used without full vm def info.
Some virHostdevXXXX methods included the string Hostdev again
as a suffix. Change the latter to Device instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Change any method names with Usb, Pci or Scsi to use
USB, PCI and SCSI since they are abbreviations.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Various methods in virnetdev.c and virhostdev.c were missing
const-ness for several char * parameters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
For extracting hostdev codes from qemu_hostdev.c to common library, change qemu
specific COLD_BOOT handling to be a flag, and pass it to hostdev functions.
For extracting hostdev codes from qemu_hostdev.c to common library, change qemu
specific cfg->relaxedACS handling to be a flag, and pass it to hostdev
functions.
Same logic of preparing/reattaching hostdevs could be used in attach/detach
hotplug places, so reuse hostdev interfaces to avoid duplicate, also for later
extracting general code to common library.
Update parameters from vm->def to specific name, hostdevs, nhostdevs to keep
consistentcy with PreparePCIDevices and PrepareSCSIDevices. And, at the same
time, make it reusable in later patch.
When attaching to a QEMU process, the def->seclabels array is
going to be empty. The qemuProcessAttach method must thus
populate it with data for the security drivers.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
While investigating https://bugzilla.redhat.com/show_bug.cgi?id=1061827
I noticed that we pass user input unscathed for block-pull, but
always pass a canonical absolute name through for block-commit.
[Note that we probably _ought_ to validate that the user's request
for block-pull actually matches the backing chain, the way we already
do for block-commit - but that's a separate issue. Further note that
the ability to pass user input through unscathed allows backdoors
such as specifying a backing image that is a network URI such as
a gluster disk, instead of forcing things to the local file system;
which is an area still under active investigation on whether libvirt
needs to behave differently for network disks.]
Since qemu may write the name that the user passed in as the backing
file, a user may have a reason to want a relative file name passed
through to qemu, and always munging things to absolute prevents that.
Put another way, if you have the backing chain:
[A] <- [B(back=./A)] <- [C(back=./B)]
and commit B into A (virsh blockcommit $dom vda --base A --top B),
the metadata of C will have to be re-written. But should it be
rewritten as [C(back=./A)] or as [C(back=/path/to/A)]? Still up in
the air is whether qemu's decision should be based on whether B
and/or C had relative paths, or on whether the --base and/or
--top arguments to the command were relative paths; but if we always
pass a canonical name, we've prevented the spelling of the command
arguments from being part of the hueristics that qemu uses.
I also audited the code, and verified that we never call
qemuMonitorBlockCommit() with a NULL base, either before or after
the change to qemu_driver.c.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Preserve user's
spelling, since absolute vs. relative matters to qemu.
* src/qemu/qemu_monitor.h (qemuMonitorBlockCommit): Base is never
null.
* src/qemu/qemu_monitor.c (qemuMonitorBlockCommit): Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockCommit):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockCommit):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The qemu_bridge_filter.c file had some helpers for calling
the ebtablesXXX functions todo bridge filtering. The only
thing these helpers did was to overwrite the original error
message from the ebtables code. For added fun, the callers
of these helpers overwrote the errors yet again. For even
more fun, one of the helpers called another helper and
overwrite its errors too.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Extracting capabilities from QEMU takes a notable amount of time
when all QEMU binaries are installed. Each system emulator
needs about 200-300ms multiplied by 26 binaries == ~5-8 seconds.
This change causes the QEMU driver to save an XML file containing
the content of the virQEMUCaps object instance in the cache
dir eg /var/cache/libvirt/qemu/capabilities/$SHA256(binarypath).xml
or $HOME/.cache/libvirt/qemu/cache/capabilities/$SHA256(binarypath).xml
We attempt to load this and only if it fails, do we fallback to
probing the QEMU binary. The ctime of the QEMU binary and libvirtd
are stored in the cached file and its data discarded if either
of them change.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Debian's package manager will preserve mtime timestamp on binaries
from the time they are built, rather than installed. So if a
user downgrades their QEMU dpkg, the libvirt capabilities
cache will not refresh. The fix is to use ctime instead of mtime
since it cannot be faked.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Avoid the freeing of an array of zero file descriptors in case
of error. Initialize the array to -1 using memset.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
This fixes a possible double free. In virNetworkAssignDef() if
virBitmapNew() fails, then virNetworkObjFree(network) is called.
However, with network->def pointing to actual @def. So if caller
frees @def again, ...
Moreover, this fixes one possible memory leak too. In
virInterfaceAssignDef() if appending to the list of interfaces
fails, we ought to call virInterfaceObjFree() instead of bare
VIR_FREE().
Although, in order to do that some array size variables needs
to be turned into size_t rather than int.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When domain is started with setting that cannot be done, i.e. those
that require cgroups, there is no error reported and it succeeds
without any message whatsoever.
When setting with API, virsh, an error is reported, but only due to
the fact that no cgroups are mounted (priv->cgroup == NULL).
Given the above it seems reasonable to reject such unsupported
settings.
This patch effectively changes the error message from:
$ virsh -c qemu:///session schedinfo dummy
Scheduler : Unknown
error: Requested operation is not valid: cgroup CPU controller is not mounted
to:
$ virsh -c qemu:///session schedinfo dummy
Scheduler : Unknown
error: Operation not supported: CPU tuning is not available in session mode
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1023366
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The qemuMonitorJSONBlockJob handles a few errors internally. If qemu
returns a different error we would report a rather unhelpful message:
$ virsh blockpull gluster-job vda --base /dev/null
error: internal error: Unexpected error
As the actual message from qemu contains a bit more info, let's use it
to report something a little more useful:
$ virsh blockpull gluster-job vda --base /dev/null
error: internal error: Unexpected error: (GenericError) 'Base '/dev/null' not found'
In qemuMonitorJSONExtractCPUInfo an error message hinted on missing
character device data which is wrong.
Also a comment states that only qemu-kvm tree includes the thread_id
field. This is no longer true.
https://bugzilla.redhat.com/show_bug.cgi?id=1071264
Reverting of external snapshots is not supported currently. The check
that is present doesn't properly check for all aspects that make a
snapshot external. Use virDomainSnapshotIsExternal() to do the check.
As I did previously in 4f588a1b46, libvirt needs to set virtio vectors.
Previously, we were advised to use vectors=N, where
N = 2 * (number of queues) + 1
However, just recently this advisory has changed on the Multiquue wiki
page [1] to:
N = 2 * (number of queues) + 2
1: http://www.linux-kvm.org/page/Multiqueue#Enable_MQ_feature
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Auditing all callers of virCommandRun and virCommandWait that
passed a non-NULL pointer for exit status turned up some
interesting observations. Many callers were merely passing
a pointer to avoid the overall command dying, but without
caring what the exit status was - but these callers would
be better off treating a child death by signal as an abnormal
exit. Other callers were actually acting on the status, but
not all of them remembered to filter by WIFEXITED and convert
with WEXITSTATUS; depending on the platform, this can result
in a status being reported as 256 times too big. And among
those that correctly parse the output, it gets rather verbose.
Finally, there were the callers that explicitly checked that
the status was 0, and gave their own message, but with fewer
details than what virCommand gives for free.
So the best idea is to move the complexity out of callers and
into virCommand - by default, we return the actual exit status
already cleaned through WEXITSTATUS and treat signals as a
failed command; but the few callers that care can ask for raw
status and act on it themselves.
* src/util/vircommand.h (virCommandRawStatus): New prototype.
* src/libvirt_private.syms (util/command.h): Export it.
* docs/internals/command.html.in: Document it.
* src/util/vircommand.c (virCommandRawStatus): New function.
(virCommandWait): Adjust semantics.
* tests/commandtest.c (test1): Test it.
* daemon/remote.c (remoteDispatchAuthPolkit): Adjust callers.
* src/access/viraccessdriverpolkit.c (virAccessDriverPolkitCheck):
Likewise.
* src/fdstream.c (virFDStreamCloseInt): Likewise.
* src/lxc/lxc_process.c (virLXCProcessStart): Likewise.
* src/qemu/qemu_command.c (qemuCreateInBridgePortWithHelper):
Likewise.
* src/xen/xen_driver.c (xenUnifiedXendProbe): Simplify.
* tests/reconnect.c (mymain): Likewise.
* tests/statstest.c (mymain): Likewise.
* src/bhyve/bhyve_process.c (virBhyveProcessStart)
(virBhyveProcessStop): Don't overwrite virCommand error.
* src/libvirt.c (virConnectAuthGainPolkit): Likewise.
* src/openvz/openvz_driver.c (openvzDomainGetBarrierLimit)
(openvzDomainSetBarrierLimit): Likewise.
* src/util/virebtables.c (virEbTablesOnceInit): Likewise.
* src/util/viriptables.c (virIpTablesOnceInit): Likewise.
* src/util/virnetdevveth.c (virNetDevVethCreate): Fix debug
message.
* src/qemu/qemu_capabilities.c (virQEMUCapsInitQMP): Add comment.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSINodeUpdate): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
When probing QEMU capabilities fails for a binary generate a
log message with MESSAGE_ID==8ae2f3fb-2dbe-498e-8fbd-012d40afa361.
This can be directly queried from journald based on the UUID
instead of needing string grep. This lets tools like libguestfs'
bug reporting tool trivially do automated sanity tests on the
host they're running on.
$ journalctl MESSAGE_ID=8ae2f3fb-2dbe-498e-8fbd-012d40afa361
Feb 21 17:11:01 localhost.localdomain lt-libvirtd[9196]:
Failed to probe capabilities for /bin/qemu-system-alpha:
internal error: Child process (LC_ALL=C LD_LIBRARY_PATH=
/home/berrange/src/virt/libvirt/src/.libs PATH=/usr/lib64/
ccache:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:
/usr/bin:/root/bin HOME=/root USER=root LOGNAME=root
/bin/qemu-system-alpha -help) unexpected exit status 127:
/bin/qemu-system-alpha: error while loading shared libraries:
libglapi.so.0: cannot open shared object file: No such file
or directory
$ journalctl MESSAGE_ID=8ae2f3fb-2dbe-498e-8fbd-012d40afa361 --output=json
{ ...snip...
"LIBVIRT_SOURCE" : "file",
"PRIORITY" : "3",
"CODE_FILE" : "qemu/qemu_capabilities.c",
"CODE_LINE" : "2770",
"CODE_FUNC" : "virQEMUCapsLogProbeFailure",
"MESSAGE_ID" : "8ae2f3fb-2dbe-498e-8fbd-012d40afa361",
"LIBVIRT_QEMU_BINARY" : "/bin/qemu-system-xtensa",
"MESSAGE" : "Failed to probe capabilities for /bin/qemu-system-xtensa:
internal error: Child process (LC_ALL=C LD_LIBRARY_PATH=/home/berrange
/src/virt/libvirt/src/.libs PATH=/usr/lib64/ccache:/usr/local/sbin:
/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin HOME=/root
USER=root LOGNAME=root /bin/qemu-system-xtensa -help) unexpected
exit status 127: /bin/qemu-system-xtensa: error while loading shared
libraries: libglapi.so.0: cannot open shared object file: No such
file or directory\n" }
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of 0bd2ccdec an empty disk path for virDomainBlockStats (or the one
with Flags) is allowed meaning "get me overall summarized statistics".
However, running 'virsh domblkstat $dom' throws a misleading error:
# ./tools/virsh domblkstat dom
error: Failed to get block stats dom
error: invalid argument: invalid path:
while after this commit
# virsh domblkstat dom
error: Operation not supported: summary statistics are not supported yet
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1038363
If a domain has a different maximum for persistent and live maxmem
or max vcpus, then it is possible to hit cases where libvirt
refuses to adjust the current values or gets halfway through
the adjustment before failing. Better is to determine up front
if the change is possible for all requested flags.
Based on an idea by Geoff Franks.
* src/qemu/qemu_driver.c (qemuDomainSetMemoryFlags): Compute
correct maximum if both live and config are being set.
(qemuDomainSetVcpusFlags): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch changes network device type used by default from rtl8139
to virtio when architecture type is aarch64 and machine type is virt.
Qemu doesn't support any other machine types for aarch64 right now and
we can't make any other aarch64-specific tuning in this function yet.
Signed-off-by: Oleg Strikov <oleg.strikov@canonical.com>
There is no keyboard working on PPC64 and PS2 mouse is only for X86
when graphics are enabled.
Add a USB keyboard and USB mouse for PPC64 when graphics are enabled.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Format qemu command line for USB keyboard
and add test cases for it.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
There might be some use cases, where user wants to prepare the host or
its environment prior to starting a network and do some cleanup after
the network has been shut down. Consider all the functionality that
libvirt doesn't currently have as an example what a hook script can
possibly do.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, there's just one place where we care if hook script is
changing the domain XML: migration hook for incoming migration. In
all other places where a hook script is executed, we don't read the
XML back from the script.
Anyway, the hook script can alter domain XML and hence we should taint
it if the script did.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add support for gluster backed images as sources for snapshots in the
qemu driver. This will also simplify adding further network backed
volumes as sources for snapshot in case qemu will support them.
Use the new storage driver APIs to delete snapshot backing files in case
of failure instead of directly relying on "unlink". This will help us in
the future when we will be adding network based storage without local
representation in the host.
All the data for getting the actual type is present in the snapshot
config. There is no need to have this function private to the qemu
driver and it will be re-used later in other parts of libvirt
All the data for getting the actual type is present in the domain
config. There is no need to have this function private to the qemu
driver and it will be re-used later in other parts of libvirt
On some platforms like IBM PowerNV the NUMA node numbers can be
non-sequential. For eg. numactl --hardware o/p from such a machine looks
as given below
node distances:
node 0 1 16 17
0: 10 40 40 40
1: 40 10 40 40
16: 40 40 10 40
17: 40 40 40 10
The NUMA nodes are 0,1,16,17
Libvirt uses sequential index as NUMA node numbers and this can
result in crash or incorrect results.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
Add a new backend for any character device. This backend uses channel
in spice connection. This channel is similar to spicevmc, but
all-purpose in contrast to spicevmc.
Apart from spicevmc, spiceport-backed chardev will not be formatted
into the command-line if there is no spice to use (with test for that
as well). For this I moved the def->graphics counting to the start
of the function so its results can be used in rest of the code even in
the future.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch is here just to ease the code review and make related
changes look more sensible. Apart from removing the condition this is
merely a whitespace (indentation) change.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Limiting ourselves to qemu without QEMU_CAPS_DEVICE capability, we
used '-serial none' only if there was no serial device defined in the
domain XML. This means that if we want to have a possibility of the
device being defined in XML, but not used in the command-line
(e.g. when it's pointless), we'll fail to attach '-serial none' to the
command-line (when skipping the device's command-line building and the
device being the only one).
Since there is no such device, this patch doesn't actually do
anything, but enables easier future additions in this manner.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add a new character device backend called 'spiceport' that uses
spice's channel for communications and apart from spicevmc can be used
as a backend for any character device from libvirt's point of view.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The code took into account only the global permissions. The domains now
support per-vm DAC labels and per-image DAC labels. Use the most
specific label available.
Add a new <timer> for the HyperV reference time counter enlightenment
and the iTSC reference page for Windows guests.
This feature provides a paravirtual approach to track timer events for
the guest (similar to kvmclock) with the option to use real hardware
clock on systems with a iTSC with compensation across various hosts.
According to the documentation various timer options are only supported
by certain timer types. Add a post parse check to verify that the user
didn't specify invalid options.
Also fix the qemu command line parsing function to set correct default
values for the kvmclock timer so that it passes the new check.
Couple of codepaths shared the same code which can be moved out to a
function and on one of such places, qemuMigrationConfirmPhase(), the
domain was resumed even if it wasn't running before the migration
started.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1057407
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This commit allows to attach/detach a <filesystem> device in qemu. For
this purpose I'm introducing two new functions: virDomainFSInsert() and
virDomainFSRemove() and adding necessary code in the qemu driver. It
compares filesystems based on their "destination" folder. So if two
filesystems share the same destination, they are considered equal and
the qemu driver would reject the insertion.
Signed-off-by: Matthieu Coudron <mattator@gmail.com>
If virDomainMemoryStats was run on a domain with virtio balloon driver
running on an old qemu which supports QMP but does not support qom-list
QMP command, libvirtd would crash. The reason is we did not check if
qemuMonitorJSONGetObjectListPaths failed and moreover we even stored its
result in an unsigned integer type.
When attempting a blockcommit from the top layer, the base argument
passed is NULL. This will be dereferenced when attempting a commit with
an empty image chain. Output the real volume path instead:
virsh blockcommit --verbose --path vda --domain DOMNAME --wait
error: invalid argument: top '/path/somefile' in chain for 'vda' has no backing file
instead of:
error: invalid argument: top '(null)' in chain for 'vda' has no backing file
https://bugzilla.redhat.com/show_bug.cgi?id=1046192
Commit b8bf79a, which adds clock='variable', forgets to check
localtime basis in qemuBuildClockArgStr(). So that localtime
basis could not be used.
Reported-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Noticed a misuse of 'to' while testing my event regression under
polkit ACLs, and decided to review the entire conf files for
other legibility bugs.
* daemon/libvirtd.conf: Use correct grammar.
* src/qemu/qemu.conf: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1058839
Commit f9f56340 for CVE-2014-0028 almost had the right idea - we
need to check the ACL rules to filter which events to send. But
it overlooked one thing: the event dispatch queue is running in
the main loop thread, and therefore does not normally have a
current virIdentityPtr. But filter checks can be based on current
identity, so when libvirtd.conf contains access_drivers=["polkit"],
we ended up rejecting access for EVERY event due to failure to
look up the current identity, even if it should have been allowed.
Furthermore, even for events that are triggered by API calls, it
is important to remember that the point of events is that they can
be copied across multiple connections, which may have separate
identities and permissions. So even if events were dispatched
from a context where we have an identity, we must change to the
correct identity of the connection that will be receiving the
event, rather than basing a decision on the context that triggered
the event, when deciding whether to filter an event to a
particular connection.
If there were an easy way to get from virConnectPtr to the
appropriate virIdentityPtr, then object_event.c could adjust the
identity prior to checking whether to dispatch an event. But
setting up that back-reference is a bit invasive. Instead, it
is easier to delay the filtering check until lower down the
stack, at the point where we have direct access to the RPC
client object that owns an identity. As such, this patch ends
up reverting a large portion of the framework of commit f9f56340.
We also have to teach 'make check' to special-case the fact that
the event registration filtering is done at the point of dispatch,
rather than the point of registration. Note that even though we
don't actually use virConnectDomainEventRegisterCheckACL (because
the RegisterAny variant is sufficient), we still generate the
function for the purposes of documenting that the filtering
takes place.
Also note that I did not entirely delete the notion of a filter
from object_event.c; I still plan on using that for my upcoming
patch series for qemu monitor events in libvirt-qemu.so. In
other words, while this patch changes ACL filtering to live in
remote.c and therefore we have no current client of the filtering
in object_event.c, the notion of filtering in object_event.c is
still useful down the road.
* src/check-aclrules.pl: Exempt event registration from having to
pass checkACL filter down call stack.
* daemon/remote.c (remoteRelayDomainEventCheckACL)
(remoteRelayNetworkEventCheckACL): New functions.
(remoteRelay*Event*): Use new functions.
* src/conf/domain_event.h (virDomainEventStateRegister)
(virDomainEventStateRegisterID): Drop unused parameter.
* src/conf/network_event.h (virNetworkEventStateRegisterID):
Likewise.
* src/conf/domain_event.c (virDomainEventFilter): Delete unused
function.
* src/conf/network_event.c (virNetworkEventFilter): Likewise.
* src/libxl/libxl_driver.c: Adjust caller.
* src/lxc/lxc_driver.c: Likewise.
* src/network/bridge_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/test/test_driver.c: Likewise.
* src/uml/uml_driver.c: Likewise.
* src/vbox/vbox_tmpl.c: Likewise.
* src/xen/xen_driver.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
commit f094aaac changed qemuPrepareHostdevPCIDevices() such that it
may modify the "backend" (vfio vs. legacy kvm) setting in the
virHostdevDef. However, qemuDomainAttachHostPciDevice() (used by
hotplug) copies the backend setting into a local *before* calling
qemuPrepareHostdevPCIDevices(), and then later makes a decision based
on that pre-change value.
The result is that, if the backend had been set to "default" (i.e. not
specified in the config) and was later updated to "VFIO" by
qemuPrepareHostdevPCIDevices(), the qemu process' MacMemLock is not
increased (as is required for VFIO device assignment).
This patch delays making the local copy of backend until after its
potential modification.
We support only one spicevmc channel name anyway and the code is
prepared to use the default one, there's only one check missing. It
is also mentioned in the documentation already and helps defining
domains with spice vdagent for people using virsh.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The NWFilter code has as a deadlock race condition between
the virNWFilter{Define,Undefine} APIs and starting of guest
VMs due to mis-matched lock ordering.
In the virNWFilter{Define,Undefine} codepaths the lock ordering
is
1. nwfilter driver lock
2. virt driver lock
3. nwfilter update lock
4. domain object lock
In the VM guest startup paths the lock ordering is
1. virt driver lock
2. domain object lock
3. nwfilter update lock
As can be seen the domain object and nwfilter update locks are
not acquired in a consistent order.
The fix used is to push the nwfilter update lock upto the top
level resulting in a lock ordering for virNWFilter{Define,Undefine}
of
1. nwfilter driver lock
2. nwfilter update lock
3. virt driver lock
4. domain object lock
and VM start using
1. nwfilter update lock
2. virt driver lock
3. domain object lock
This has the effect of serializing VM startup once again, even if
no nwfilters are applied to the guest. There is also the possibility
of deadlock due to a call graph loop via virNWFilterInstantiate
and virNWFilterInstantiateFilterLate.
These two problems mean the lock must be turned into a read/write
lock instead of a plain mutex at the same time. The lock is used to
serialize changes to the "driver->nwfilters" hash, so the write lock
only needs to be held by the define/undefine methods. All other
methods can rely on a read lock which allows good concurrency.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To support passing the path of the test data to the utils, one
more argument is added to virSCSIDeviceGetSgName,
virSCSIDeviceGetDevName, and virSCSIDeviceNew, and the related
code is changed accordingly.
Later tests for the scsi utils will be based on this patch.
Signed-off-by: Osier Yang <jyang@redhat.com>
It doesn't make sense to fail if the SCSI host device is specified
as "shareable" explicitly between domains (NB, it works if and only
if the device is specified as "shareable" for *all* domains,
otherwise it fails).
To fix the problem, this patch introduces an array for virSCSIDevice
struct, which records all the names of domain which are using the
device (note that the recorded domains must specify the device as
shareable). And the change on the data struct brings on many
subsequent changes in the code.
Prior to this patch, the "shareable" tag didn't work as expected,
it actually work like "non-shareable". So this patch also added notes
in formatdomain.html to declare the fact.
* src/util/virscsi.h:
- Remove virSCSIDeviceGetUsedBy
- Change definition of virSCSIDeviceGetUsedBy and virSCSIDeviceListDel
- Add virSCSIDeviceIsAvailable
* src/util/virscsi.c:
- struct virSCSIDevice: Change "used_by" to be an array; Add
"n_used_by" as the array count
- virSCSIDeviceGetUsedBy: Removed
- virSCSIDeviceFree: frees the "used_by" array
- virSCSIDeviceSetUsedBy: Copy the domain name to avoid potential
memory corruption
- virSCSIDeviceIsAvailable: New
- virSCSIDeviceListDel: Change the logic, for device which is already
in the list, just remove the corresponding entry in "used_by". And
since it's only used in one place, we can safely removing the code
to find out the dev in the list first.
- Copyright updating
* src/libvirt_private.sys:
- virSCSIDeviceGetUsedBy: Remove
- virSCSIDeviceIsAvailable: New
* src/qemu/qemu_hostdev.c:
- qemuUpdateActiveScsiHostdevs: Check if the device existing before
adding it to the list;
- qemuPrepareHostdevSCSIDevices: Error out if the not all domains
use the device as "shareable"; Also don't try to add the device
to the activeScsiHostdevs list if it already there; And make
more sensible error w.r.t the current "shareable" value in
driver->activeScsiHostdevs.
- qemuDomainReAttachHostScsiDevices: Change the logic according
to the changes on helpers.
Signed-off-by: Osier Yang <jyang@redhat.com>
Add support for specifying various types when doing snapshots. This will
later allow to do snapshots on network backed volumes. Disks of type
'volume' are not supported by snapshots (yet).
Also amend the test suite to check parsing of the various new disk
types that can now be specified.
Creating a qemu VM with /dev/hwrng as backend RNG device throws the
following error - "Could not open '/dev/hwrng': Permission denied"
This patch fixes the issue
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently the qemuDomainGetBlockInfo will return allocation == physical
for most backing stores. For a qcow2 block backed device it's possible
to return the highest lv extent allocated from qemu for an active guest.
That is a value where allocation != physical and one would hope be less.
However, if the guest is not running, then the code falls back to returning
allocation == physical. This turns out to be problematic for rhev which
monitors the size of the backing store. During a migration, before the
VM has been started on the target and while it is deemed inactive on the
source, there's a small window of time where the allocation is returned
as physical triggering the code to extend the file unnecessarily.
Since rhev uses transient domains and this is edge condition for a transient
domain, rather than returning good status and allocation == physical when
this "window of opportunity" exists, this patch will check for a transient
(or non persistent) domain and return a failure to the caller rather than
returning the defaults. For a persistent domain, the defaults will be
returned. The description for the virDomainGetBlockInfo has been updated
to describe the phenomena.
the array params is allocated by VIR_ALLOC_N in
remoteDispatchDomainGetCPUStats. it had been set
to zero. No need to reset it to zero again, and
this reset here is incorrect too, nparams * ncpus
is the array length not the size of params array.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Unlike the host devices of other types, SCSI host device XML supports
"shareable" tag. This patch introduces it for the virSCSIDevice struct
for a later patch use (to detect if the SCSI device is shareable when
preparing the SCSI host device in QEMU driver).
I noticed that we allow virDomainGetVcpusFlags even for read-only
connections, but that with a flag, it can require guest agent
interaction. It is feasible that a malicious guest could
intentionally abuse the replies it sends over the guest agent
connection to possibly trigger a bug in libvirt's JSON parser,
or withhold an answer so as to prevent the use of the agent
in a later command such as a shutdown request. Although we
don't know of any such exploits now (and therefore don't mind
posting this patch publicly without trying to get a CVE assigned),
it is better to err on the side of caution and explicitly require
full access to any domain where the API requires guest interaction
to operate correctly.
I audited all commands that are marked as conditionally using a
guest agent. Note that at least virDomainFSTrim is documented
as needing a guest agent, but that such use is unconditional
depending on the hypervisor (so the existing domain:fs_trim ACL
should be sufficient there, rather than also requirng domain:write).
But when designing future APIs, such as the plans for obtaining
a domain's IP addresses, we should copy the approach of this patch
in making interaction with the guest be specified via a flag, and
use that flag to also require stricter access checks.
* src/libvirt.c (virDomainGetVcpusFlags): Forbid guest interaction
on read-only connection.
(virDomainShutdownFlags, virDomainReboot): Improve docs on agent
interaction.
* src/remote/remote_protocol.x
(REMOTE_PROC_DOMAIN_SNAPSHOT_CREATE_XML)
(REMOTE_PROC_DOMAIN_SET_VCPUS_FLAGS)
(REMOTE_PROC_DOMAIN_GET_VCPUS_FLAGS, REMOTE_PROC_DOMAIN_REBOOT)
(REMOTE_PROC_DOMAIN_SHUTDOWN_FLAGS): Require domain:write for any
conditional use of a guest agent.
* src/xen/xen_driver.c: Fix clients.
* src/libxl/libxl_driver.c: Likewise.
* src/uml/uml_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/lxc/lxc_driver.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Libvirtd would crash if a domain contained an empty cdrom drive of
type='volume' as the disk def->srcpool member would be dereferenced. Fix
it by checking if the source pool is present before dereferencing it.
Also alter tests to catch this issue in the future.
Reported by: Kevin Shanahan
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1056328
https://bugzilla.redhat.com/show_bug.cgi?id=1034993
SCSI passthrough disks (<disk .. device="lun">) can't be used as backing
for snapshots. Currently with upstream qemu the vm crashes on such
attempt.
This patch adds a early check to catch an attempt to do such a snapshot
and rejects it right away. qemu will fix the issue but this will let us
control the error message.
We shouldn't access the domain definition while we are in the monitor
section as the domain is unlocked. Additionally after we exit from the
monitor we need to check if the VM is still alive. Not doing so resulted
in a crash if qemu exits while attempting to do an external VM snapshot.
spice-server offers an API to disable file transfer messages
on the agent channel between the client and the guest.
This is supported in qemu through the disable-agent-file-xfer option.
This patch exposes this option to libvirt.
Adds a new element 'filetransfer', with one property,
'enable', which accepts a boolean.
Default is enabled, for backward compatibility.
Depends on the capability exported in the first patch of the series.
Signed-off-by: Francesco Romani <fromani@redhat.com>
spice-server offers an API to disable file transfer messages
on the agent channel between the client and the guest.
This is supported in qemu through the disable-agent-file-xfer option.
This patch detects if QEMU supports this option, and add
a capability if does.
Signed-off-by: Francesco Romani <fromani@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1046919
If none (KVM, VFIO) of the supported PCI passthrough methods is known to
work on a host, it's better to fail right away with a nice error message
rather than letting attachment fail with a more cryptic message such as
Failed to bind PCI device '0000:07:05.0' to vfio-pci: No such device
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
With this patch, user can setup throttle blkio cgroup
through virsh for qemu domain.
Signed-off-by: Guan Qiang <hzguanqiang@corp.netease.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
This patch introduces virCgroupSetBlkioDeviceReadIops,
virCgroupSetBlkioDeviceWriteIops,
virCgroupSetBlkioDeviceReadBps and
virCgroupSetBlkioDeviceWriteBps,
we can use these interfaces to set up throttle
blkio cgroup for domain.
This patch also adds the new throttle blkio cgroup
elements to the test xml.
Signed-off-by: Guan Qiang <hzguanqiang@corp.netease.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
While auditing the error reporting, I noticed that migration
had some issues. Some of the static helper functions tried
to call virDispatchError(), even though their caller will also
report the error. Also, if a migration is cancelled early
because a uri was not set, we did not guarantee that the finish
stage would not overwrite the first error message.
* src/qemu/qemu_migration.c (doPeer2PeerMigrate2)
(doPeer2PeerMigrate3): Preserve first error when cancelling.
* src/libvirt.c (virDomainMigrateVersion3Full): Likewise.
(virDomainMigrateVersion1, virDomainMigrateVersion2)
(virDomainMigrateDirect): Avoid redundant error dispatch.
(virDomainMigrateFinish2, virDomainMigrateFinish3)
(virDomainMigrateFinish3Params): Don't report error on cleanup
path.
Signed-off-by: Eric Blake <eblake@redhat.com>
The public virConnectRef and virConnectClose API are just thin
wrappers around virObjectRef/virObjectRef, with added object
validation and an error reset. Within our backend drivers, use
of the object validation is just an inefficiency since we always
pass valid objects. More important to think about is what
happens with the error reset; our uses of virConnectRef happened
to be safe (since we hadn't encountered any earlier errors), but
in several cases the use of virConnectClose could lose a real
error.
Ideally, we should also avoid calling virConnectOpen() from
within backend drivers - but that is a known situation that
needs much more design work.
* src/qemu/qemu_process.c (qemuProcessReconnectHelper)
(qemuProcessReconnect): Avoid nested public API call.
* src/qemu/qemu_driver.c (qemuAutostartDomains)
(qemuStateInitialize, qemuStateStop): Likewise.
* src/qemu/qemu_migration.c (doPeer2PeerMigrate): Likewise.
* src/storage/storage_driver.c (storageDriverAutostart):
Likewise.
* src/uml/uml_driver.c (umlAutostartConfigs): Likewise.
* src/lxc/lxc_process.c (virLXCProcessAutostartAll): Likewise.
(virLXCProcessReboot): Likewise, and avoid leaking conn on error.
Signed-off-by: Eric Blake <eblake@redhat.com>
There is a number of reported issues when we fail starting a domain.
Turns out that, in some scenarios like high load, 3 second timeout is
not enough for qemu to start up to the phase where the socket is
created. Since there is no downside of waiting longer, raise the
timeout right to 30 seconds.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Ever since ACL filtering was added in commit 7639736 (v1.1.1), a
user could still use event registration to obtain access to a
domain that they could not normally access via virDomainLookup*
or virConnectListAllDomains and friends. We already have the
framework in the RPC generator for creating the filter, and
previous cleanup patches got us to the point that we can now
wire the filter through the entire object event stack.
Furthermore, whether or not domain:getattr is honored, use of
global events is a form of obtaining a list of networks, which
is covered by connect:search_domains added in a93cd08 (v1.1.0).
Ideally, we'd have a way to enforce connect:search_domains when
doing global registrations while omitting that check on a
per-domain registration. But this patch just unconditionally
requires connect:search_domains, even when no list could be
obtained, based on the following observations:
1. Administrators are unlikely to grant domain:getattr for one
or all domains while still denying connect:search_domains - a
user that is able to manage domains will want to be able to
manage them efficiently, but efficient management includes being
able to list the domains they can access. The idea of denying
connect:search_domains while still granting access to individual
domains is therefore not adding any real security, but just
serves as a layer of obscurity to annoy the end user.
2. In the current implementation, domain events are filtered
on the client; the server has no idea if a domain filter was
requested, and must therefore assume that all domain event
requests are global. Even if we fix the RPC protocol to
allow for server-side filtering for newer client/server combos,
making the connect:serach_domains ACL check conditional on
whether the domain argument was NULL won't benefit older clients.
Therefore, we choose to document that connect:search_domains
is a pre-requisite to any domain event management.
Network events need the same treatment, with the obvious
change of using connect:search_networks and network:getattr.
* src/access/viraccessperm.h
(VIR_ACCESS_PERM_CONNECT_SEARCH_DOMAINS)
(VIR_ACCESS_PERM_CONNECT_SEARCH_NETWORKS): Document additional
effect of the permission.
* src/conf/domain_event.h (virDomainEventStateRegister)
(virDomainEventStateRegisterID): Add new parameter.
* src/conf/network_event.h (virNetworkEventStateRegisterID):
Likewise.
* src/conf/object_event_private.h (virObjectEventStateRegisterID):
Likewise.
* src/conf/object_event.c (_virObjectEventCallback): Track a filter.
(virObjectEventDispatchMatchCallback): Use filter.
(virObjectEventCallbackListAddID): Register filter.
* src/conf/domain_event.c (virDomainEventFilter): New function.
(virDomainEventStateRegister, virDomainEventStateRegisterID):
Adjust callers.
* src/conf/network_event.c (virNetworkEventFilter): New function.
(virNetworkEventStateRegisterID): Adjust caller.
* src/remote/remote_protocol.x
(REMOTE_PROC_CONNECT_DOMAIN_EVENT_REGISTER)
(REMOTE_PROC_CONNECT_DOMAIN_EVENT_REGISTER_ANY)
(REMOTE_PROC_CONNECT_NETWORK_EVENT_REGISTER_ANY): Generate a
filter, and require connect:search_domains instead of weaker
connect:read.
* src/test/test_driver.c (testConnectDomainEventRegister)
(testConnectDomainEventRegisterAny)
(testConnectNetworkEventRegisterAny): Update callers.
* src/remote/remote_driver.c (remoteConnectDomainEventRegister)
(remoteConnectDomainEventRegisterAny): Likewise.
* src/xen/xen_driver.c (xenUnifiedConnectDomainEventRegister)
(xenUnifiedConnectDomainEventRegisterAny): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc): Likewise.
* src/libxl/libxl_driver.c (libxlConnectDomainEventRegister)
(libxlConnectDomainEventRegisterAny): Likewise.
* src/qemu/qemu_driver.c (qemuConnectDomainEventRegister)
(qemuConnectDomainEventRegisterAny): Likewise.
* src/uml/uml_driver.c (umlConnectDomainEventRegister)
(umlConnectDomainEventRegisterAny): Likewise.
* src/network/bridge_driver.c
(networkConnectNetworkEventRegisterAny): Likewise.
* src/lxc/lxc_driver.c (lxcConnectDomainEventRegister)
(lxcConnectDomainEventRegisterAny): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1047659
If a VM dies very early during an attempted connect to the guest agent
while the locks are down the domain monitor object will be freed. The
object is then accessed later as any failure during guest agent startup
isn't considered fatal.
In the current upstream version this doesn't lead to a crash as
virObjectLock called when entering the monitor in
qemuProcessDetectVcpuPIDs checks the pointer before attempting to
dereference (lock) it. The NULL pointer is then caught in the monitor
helper code.
Before the introduction of virObjectLockable - observed on 0.10.2 - the
pointer is locked directly via virMutexLock leading to a crash.
To avoid this problem we need to differentiate between the guest agent
not being present and the VM quitting when the locks were down. The fix
reorganizes the code in qemuConnectAgent to add the check and then adds
special handling to the callers.
CVE-2013-6458
Generally, every API that is going to begin a job should do that before
fetching data from vm->def. However, qemuDomainGetBlockInfo does not
know whether it will have to start a job or not before checking vm->def.
To avoid using disk alias that might have been freed while we were
waiting for a job, we use its copy. In case the disk was removed in the
meantime, we will fail with "cannot find statistics for device '...'"
error message.
CVE-2013-6458
https://bugzilla.redhat.com/show_bug.cgi?id=1043069
When virDomainDetachDeviceFlags is called concurrently to
virDomainBlockStats: libvirtd may crash because qemuDomainBlockStats
finds a disk in vm->def before getting a job on a domain and uses the
disk pointer after getting the job. However, the domain in unlocked
while waiting on a job condition and thus data behind the disk pointer
may disappear. This happens when thread 1 runs
virDomainDetachDeviceFlags and enters monitor to actually remove the
disk. Then another thread starts running virDomainBlockStats, finds the
disk in vm->def, and while it's waiting on the job condition (owned by
the first thread), the first thread finishes the disk removal. When the
second thread gets the job, the memory pointed to be the disk pointer is
already gone.
That said, every API that is going to begin a job should do that before
fetching data from vm->def.
This patch fixes a segmentation fault when creating new virtual machines using QEMU.
The segmentation fault is caused by commit f41830680e
and commit cbb6ec42e2.
In virQEMUCapsProbeQMPMachineTypes, when copying machines to qemuCaps, "none" is skipped.
Therefore, the value of i and "qemuCaps->nmachineTypes - 1" do not always match.
However, defIdx value (used to call virQEMUCapsSetDefaultMachine) is set using the value in i
when the array elements are in qemuCaps->nmachineTypes - 1.
So, when libvirt tries to create virtual machines using the default machine type,
qemuCaps->machineTypes[defIdx] is accessed and since the defIdx is NULL, it results in segmentation fault.
Signed-off-by: Yudai Yamagishi <yummy@sfc.wide.ad.jp>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Currently, the qemuProcessStop tries to open the domain log file
and saves the original error afterwards. Then all the cleanup is
done after which the error is restored back. This has however one
flaw: if opening of the log file fails an error is reported,
which results in previous error being overwritten (the useful
one, e.g. "PCI device XXXX:XXXX could not be found"). Hence, user
sees something like:
error: failed to create logfile /var/log/libvirt/qemu/ovirt_usb.log: No such file or directory
instead of:
error: internal error: Did not find USB device 8644:8003
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reported-by: Zhou Yimin <zhouyimin@huawei.com>
@listenAddress and @cookiein arguments, should be exchanged,
because the order of the caller and the callee does not match.
This results in the listen address being ignored for peer-to-peer
migration and the cookie being ignored for v2 migration.
Introduced by c4ac7ef (v1.1.4-rc1~141).
https://bugzilla.redhat.com/show_bug.cgi?id=1049338
Signed-off-by: Minoru Usui <usui@mxm.nes.nec.co.jp>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
AArch64 qemu has similar behavior as armv7l, like use of mmio etc.
This patch adds similar bypass checks what we have for armv7l to aarch64.
E.g. we are enabling mmio transport for Nicdev.
Making addDefaultUSB and addDefaultMemballoon to false etc.
V3:
- Adding missing domain rng schema for aarcg64 and test case in
testutilsqemu.c which was causing test suite failure
while running make check.
V2:
- Added testcase to qemuxml2argvtest as suggested
during review comments of V1.
V1:
- Initial patch.
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
https://bugzilla.redhat.com/show_bug.cgi?id=1047234
Add a range check for supported numa memory placement modes provided by
the user before setting them in the domain definition. Without the check
the user is able to provide a (yet) unknown mode which is then stored in
the domain definition. This potentially causes a NULL dereference when
the defintion is formatted into the XML.
To reproduce run:
virsh numatune DOMNAME --mode 6 --nodeset 0
The XML will then contain:
<numatune>
<memory mode='(null)' nodeset='0'/>
</numatune>
With this fix, the command fails:
error: Unable to change numa parameters
error: invalid argument: unsupported numa_mode: '6'
Add whitespace to separate logical code blocks, reformat error messages
and clean up code flow.
This patch changes error handling in some cases where the the loop would
be continued to jump to cleanup instead and error out rather than modify
the domain any further.
Do not leave the PCI address of the primary video card set
to the legacy default (0000:00:02.0) if we're doing two-pass
allocation.
Since QEMU 1.6 (QEMU_CAPS_VIDEO_PRIMARY) we allow the primary
video card to be on other slots than 0000:00:02.0 (as we use
-device instead of -vga).
However we fail to assign it an address if:
* another device explicitly uses 0000:00:02.0 and
* the primary video device has no address specified
On the first pass, we have set the address to default, then checked
if it's available, leaving it set even if it wasn't. This address
got picked up by the second pass, resulting in a conflict:
XML error: Attempted double use of PCI slot 0000:00:02.0
(may need "multifunction='on'" for device on function 0)
Also fix the test that was supposed to catch this.
This eliminates the misleading error message that was being logged
when a vfio hostdev hotplug failed:
error: unable to set user and group to '107:107' on '/dev/vfio/22':
No such file or directory
as documented in:
https://bugzilla.redhat.com/show_bug.cgi?id=1035490
Commit ee414b5d (pushed as a fix for Bug 1016511 and part of Bug
1025108) replaced the single call to
virSecurityManagerSetHostdevLabel() in qemuDomainAttachHostDevice()
with individual calls to that same function in each
device-type-specific attach function (for PCI, USB, and SCSI). It also
added a corresponding call to virSecurityManagerRestoreHostdevLabel()
in the error handling of the device-type-specific functions, but
forgot to remove the common call to that from
qemuDomainAttachHostDevice() - this resulted in a duplicate call to
virSecurityManagerRestoreHostdevLabel(), with the second occurrence
being after (e.g.) a PCI device has already been re-attached to the
host driver, thus destroying some of the device nodes / links that we
then attempted to re-label (e.f. /dev/vfio/22) and generating an error
log that obscured the original error.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1035490
virProcessSetMaxMemLock() (which is a wrapper over prlimit(3)) expects
the memory size in bytes, but libvirt's domain definition (which was
being used by qemuDomainAttachHostPciDevice()) stores all memory
tuning parameters in KiB. This was being accounted for when setting
MaxMemLock at domain startup time (so cold-plugged devices would
work), but not for hotplug.
This patch simplifies the few lines that call
virProcessSetMemMaxLock(), and multiply the amount * 1024 so that
we're locking the correct amount of memory.
What remains a mystery to me is why hot-plug of a managed='no' device
would succeed (at least on my system) while managed='yes' would
fail. I guess in one case the memory was coincidentally already
resident and in the other it wasn't.
On a system that is enforcing FIPS, most libraries honor the
current mode by default. Qemu, on the other hand, refused to
honor FIPS mode unless you add the '-enable-fips' command
line option; worse, this option is not discoverable via QMP,
and is only present on binaries built for Linux. So, if we
detect FIPS mode, then we unconditionally ask for FIPS; either
qemu is new enough to have the option and then correctly
cripple insecure VNC passwords, or it is so old that we are
correctly avoiding a FIPS violation by preventing qemu from
starting. Meanwhile, if we don't detect FIPS mode, then
omitting the argument is safe whether the qemu has the option
(but it would do nothing because FIPS is disabled) or whether
qemu lacks the option (including in the case where we are not
running on Linux).
The testsuite was a bit interesting: we don't want our test
to depend on whether it is being run in FIPS mode, so I had
to tweak things to set the capability bit outside of our
normal interaction with capability parsing.
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1035474
* src/qemu/qemu_capabilities.h (QEMU_CAPS_ENABLE_FIPS): New bit.
* src/qemu/qemu_capabilities.c (virQEMUCapsInitQMP): Conditionally
set capability according to detection of FIPS mode.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Use it.
* tests/qemucapabilitiestest.c (testQemuCaps): Conditionally set
capability to test expected output.
* tests/qemucapabilitiesdata/caps_1.2.2-1.caps: Update list.
* tests/qemucapabilitiesdata/caps_1.6.0-1.caps: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The support for <boot rebootTimeout="12345"/> was added before we were
checking for qemu command line options in QMP, so we haven't properly
adapted virQEMUCaps when using it and thus we report unsupported
option with new enough qemu.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1042690
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Recent changes to events (commit 8a29ffcf) resulted in new compile
failures on some targets (such as ARM OMAP5):
conf/domain_event.c: In function 'virDomainEventDispatchDefaultFunc':
conf/domain_event.c:1198:30: error: cast increases required alignment of
target type [-Werror=cast-align]
conf/domain_event.c:1314:34: error: cast increases required alignment of
target type [-Werror=cast-align]
cc1: all warnings being treated as errors
The error is due to alignment; the base class is merely aligned
to the worst of 'int' and 'void*', while the child class must
be aligned to a 'long long'. The solution is to include a
'long long' (and for good measure, a function pointer) in the
base class to ensure correct alignment regardless of what a
child class may add, but to wrap the inclusion in a union so
as to not incur any wasted space. On a typical x86_64 platform,
the base class remains 16 bytes; on i686, the base class remains
12 bytes; and on the impacted ARM platform, the base class grows
from 12 bytes to 16 bytes due to the increase of alignment from
4 to 8 bytes.
Reported by Michele Paolino and others.
* src/util/virobject.h (_virObject): Use a union to ensure that
subclasses never have stricter alignment than the parent.
* src/util/virobject.c (virObjectNew, virObjectUnref)
(virObjectRef): Adjust clients.
* src/libvirt.c (virConnectRef, virDomainRef, virNetworkRef)
(virInterfaceRef, virStoragePoolRef, virStorageVolRef)
(virNodeDeviceRef, virSecretRef, virStreamRef, virNWFilterRef)
(virDomainSnapshotRef): Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorOpenInternal)
(qemuMonitorClose): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Map the new <panic> device in XML to the '-device pvpanic' command
line of qemu. Clients can then couple the <panic> device and the
<on_crash> directive to control behavior when the guest reports
a panic to qemu.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1035955
There's a window when starting a qemu process between fork() and exec()
during which we are doing things that may fail but not tunnelling the
error to the daemon. This is basically all within qemuProcessHook().
So whenever we fail in something, e.g. placing a process onto numa node,
users are left with:
error: Child quit during startup handshake: Input/output error
while the original error is thrown into the domain log:
libvirt: error : internal error: NUMA memory tuning in 'preferred'
mode only supports single node
Hence, we should read the log file and search for the error message and
report it to users.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For dead domains that have no memtune limits, we return 0 instead of
"unlimited", this patch fixes it to return PARAM_UNLIMITED.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We were unconditionally removing the device from the host list, when it
should only be done on error.
This fixes USB collision detection when hotplugging the same device to
two guests.
If we hit a collision, we free the USB device while it is still part
of our temporary USBDeviceList. When the list is unref'd, the device
is free'd again.
Make the initial device freeing dependent on whether it is present
in the temporary list or not.
Similar to what Jiri did for cgroup setup/teardown in 05e149f94, push
it all into the device handler functions so we can do the necessary prep
work before claiming the device.
This also fixes hotplugging USB devices by product/vendor (virt-manager's
default behavior):
https://bugzilla.redhat.com/show_bug.cgi?id=1016511
https://bugzilla.redhat.com/show_bug.cgi?id=1035108
When attempting to enable more vCPUs in the guest than is currently
enabled in the guest but less than the maximum count for the VM we
currently reported an unhelpful message:
error: internal error: guest agent reports less cpu than requested
This patch changes it to:
error: invalid argument: requested vcpu count is greater than the count
of enabled vcpus in the domain: 3 > 2
When an error occurred in qemuAgentIO, it will be saved in mon->lastError,
but it will not be freed at the end. Present since commit c160ce33;
and compare to commit 9cc8a5af fixing the same problem in qemu_monitor.c.
==22219== 54 bytes in 1 blocks are definitely lost in loss record 982 of 1,379
==22219== at 0x4C26B9B: malloc (vg_replace_malloc.c:263)
==22219== by 0x8520521: strdup (in /lib64/libc-2.11.3.so)
==22219== by 0x52E99CB: virStrdup (virstring.c:554)
==22219== by 0x52B44C4: virCopyError (virerror.c:195)
==22219== by 0x52B5123: virCopyLastError (virerror.c:312)
==22219== by 0x10905877: qemuAgentIO (qemu_agent.c:660)
==22219== by 0x52B6122: virEventPollDispatchHandles (vireventpoll.c:501)
==22219== by 0x52B7AEA: virEventPollRunOnce (vireventpoll.c:647)
==22219== by 0x52B5C1B: virEventRunDefaultImpl (virevent.c:274)
==22219== by 0x54181FD: virNetServerRun (virnetserver.c:1112)
==22219== by 0x11EF4D: main (libvirtd.c:1513)
Signed-off-by: Zhou Yimin <zhouyimin@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch fixes memory leaks reported by valgrind on running
qemuxml2argvtest; introduced in commit 0df53f04.
Most of them are of the form:
==24777== 15 bytes in 1 blocks are definitely lost in loss record 39 of 129
==24777== at 0x4A0887C: malloc (vg_replace_malloc.c:270)
==24777== by 0x341F485E21: strdup (strdup.c:42)
==24777== by 0x4CADE5F: virStrdup (virstring.c:554)
==24777== by 0x4362B6: qemuBuildDriveStr (qemu_command.c:3848)
==24777== by 0x43EF73: qemuBuildCommandLine (qemu_command.c:8500)
==24777== by 0x426670: testCompareXMLToArgvHelper (qemuxml2argvtest.c:350)
==24777== by 0x427C01: virtTestRun (testutils.c:138)
==24777== by 0x41DDB5: mymain (qemuxml2argvtest.c:658)
==24777== by 0x4282A2: virtTestMain (testutils.c:593)
==24777== by 0x341F421A04: (below main) (libc-start.c:225)
==24777==
Signed-off-by: Eric Blake <eblake@redhat.com>
Ever since the subcpusets(vcpu,emulator) were introduced, the parent
cpuset cannot be modified to remove the nodes that are in use by the
subcpusets.
The fix is to break the memory node modification into three steps:
1. assign new nodes into the parent,
2. change the nodes in the child nodes,
3. remove the old nodes on the parent node.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1009880
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1029732
The BZ asked for the capability to change the number of queues used by
a virtio-net device while the device is in use. Because the number of
queues can only be set at the time the device is created, that isn't
possible. However, libvirt also shouldn't be silently reporting
success when someone tries to change the number of queues. So this
patch flags that as an error (just as attempts to change any of the
other virtio-specific parameters already do).
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=888635
(which was already closed as CANTFIX because the qemu "-boot strict"
commandline option wasn't available at the time).
Problem: you couldn't have a domain that used PXE to boot, but also
had an un-bootable disk device *even if that disk wasn't listed in the
boot order*, because if PXE timed out (e.g. due to the bridge
forwarding delay), the BIOS would move on to the next target, which
would be the unbootable disk device (again - even though it wasn't
given a boot order), and get stuck at a "BOOT DISK FAILURE, PRESS ANY
KEY" message until a user intervened.
The solution available since sometime around QEMU 1.5, is to add
"-boot strict=on" to *every* qemu command. When this is done, if any
devices have a boot order specified, then QEMU will *only* attempt to
boot from those devices that have an explicit boot order, ignoring the
rest.
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1035188
Commit f094aaac48 changed the PCI device assignment in qemu domains
to default to using VFIO rather than legacy KVM device assignment
(when VFIO is available). It didn't change which driver was used by
default for virNodeDeviceDetachFlags(), though, so that API (and the
virsh nodedev-detach command) was still binding to the pci-stub
driver, used by legacy KVM assignment, by default.
This patch publicizes (only within the qemu module, though, so no
additions to the symbol exports are needed) the functions that check
for presence of KVM and VFIO device assignment, then uses those
functions to decide what to do when no driver is specified for
virNodeDeviceDetachFlags(); if the vfio driver is loaded, the device
will be bound to vfio-pci, or if legacy KVM assignment is supported on
this system, the device will be bound to pci-stub; if neither method
is available, the detach will fail.
Currently the snapshot code did not check if it actually supports
snapshots on various disk backends for domains. To avoid future problems
add checkers that whitelist the supported configurations.
This patch adds function qemuGetDriveSourceString to produce
qemu-compatible disk source strings that will enable to reuse the code
and refactors building of the qemu commandline of disks to use this new
helper.
Automatically assign secret type from the disk source definition and
pull in adding of the comma. Then update callers to keep generated
output the same.
Before this patch, the translation function still needs a second ugly
helper function to actually format the command line for qemu. But if we
do the right stuff in the translation function, we don't have to bother
with the second function any more.
This patch removes the messy qemuBuildVolumeString function and changes
qemuTranslateDiskSourcePool to set stuff up correctly so that the
regular code paths meant for volumes can be used to format the command
line correctly.
For this purpose a new helper "qemuDiskGetActualType()" is introduced to
return the type of the volume in a pool.
As a part of the refactor the qemuTranslateDiskSourcePool function is
fixed to do decisions based on the pool type instead of the volume type.
This allows to separate pool-type-specific stuff more clearly and will
ease addition of other pool types that will require certain other
operations to get the correct pool source.
The previously fixed tests should make sure that we don't break stuff
that was working before.
When doing an internal snapshot on a VM with sheepdog or RBD disks we
would not set a flag to mark the domain is using internal snapshots and
might end up creating a mixed snapshot. Move the setting of the variable
to avoid this problem.
The virsh command 'domxml-to-native' (virConnectDomainXMLToNative())
converts all network devices to "type='ethernet'" in order to make it
more likely that the generated command could be run directly from a
shell (other libvirt network device types end up referencing file
descriptors for tap devices assumed to have been created by libvirt,
which can't be done in this case).
During this conversion, all of the netdev parameters are cleared out,
then specific items are filled in after changing the type. The MAC
address was not one of these preserved items, and the result was that
mac addresses in the generated commandlines were always
00:00:00:00:00:00.
This patch saves the mac address before the conversion, then
repopulates it afterwards, so the proper mac addresses show up in the
commandline.
Signed-off-by: Bing Bu Cao <mars@linux.vnet.ibm.com>
Signed-off-by: Laine Stump <laine@laine.org>
In the 'directory' and 'netfs' storage pools, a user can see
both 'file' and 'dir' storage volume types, to know when they
can descend into a subdirectory. But in a network-based storage
pool, such as the upcoming 'gluster' pool, we use 'network'
instead of 'file', and did not have any counterpart for a
directory until this patch. Adding a new volume type
'network-dir' is better than reusing 'dir', because it makes
it clear that the only way to access 'network' volumes within
that container is through the network mounting (leaving 'dir'
for something accessible in the local file system).
* include/libvirt/libvirt.h.in (virStorageVolType): Expand enum.
* docs/formatstorage.html.in: Document it.
* docs/schemasa/storagevol.rng (vol): Allow new value.
* src/conf/storage_conf.c (virStorageVol): Use new value.
* src/qemu/qemu_command.c (qemuBuildVolumeString): Fix client.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePool): Likewise.
* tools/virsh-volume.c (vshVolumeTypeToString): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemVolDelete): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The bus type IDE being enum Zero, the bus type on pseries system appears as IDE for all the -hda/-cdrom and for disk drives with if="none" type. Pseries platform needs this to appear as SCSI instead of IDE. The ide being not supported, the explicit requests for ide devices will return an error.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
This nested job is canceled by the first ExitMonitor call (even though
it was not created by the corresponding EnterMonitor call), and
again in qemuMigrationPrepareAny if qemuProcessStart failed.
This can lead to a crash if the vm object was disposed of before calling
qemuDomainRemoveInactive:
0 ..62bc in virClassIsDerivedFrom (klass=0xdeadbeef,
parent=0x7ffce4cdd270) at util/virobject.c:166
1 ..6666 in virObjectIsClass at util/virobject.c:362
2 ..66b4 in virObjectLock at util/virobject.c:314
3 ..477e in virDomainObjListRemove at conf/domain_conf.c:2359
4 ..7a64 in qemuDomainRemoveInactive at qemu/qemu_domain.c:2087
5 ..956c in qemuMigrationPrepareAny at qemu/qemu_migration.c:2469
This was added by commit e4e2822, exposed by 5a4c237 and c7ac251.
https://bugzilla.redhat.com/show_bug.cgi?id=1018267
If a SCSI hostdev is included in an initial domain XML, without a
corresponding controller statement, one is created silently when the
guest is booted.
When hotplugging a SCSI hostdev, a presumption is that the controller
is already present in the domain either from the original XML, or via
an earlier hotplug.
[root@xxxxxxxx ~]# cat disk.xml
<hostdev mode='subsystem' type='scsi'>
<source>
<adapter name='scsi_host0'/>
<address bus='0' target='3' unit='1088438288'/>
</source>
</hostdev>
[root@xxxxxxxx ~]# virsh attach-device guest01 disk.xml
error: Failed to attach device from disk.xml
error: internal error: unable to execute QEMU command 'device_add': Bus 'scsi0.0' not found
Since the infrastructure is in place, we can also create a controller
silently for use by the hotplugged hostdev device.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
For systems without a PCI bus, attaching a SCSI controller fails:
[root@xxxxxxxx ~]# cat controller.xml
<controller type='scsi' model='virtio-scsi' index='0' />
[root@xxxxxxxx ~]# virsh attach-device guest01 controller.xml
error: Failed to attach device from controller.xml
error: XML error: No PCI buses available
A similar problem occurs with the detach of a controller:
[root@xxxxxxxx ~]# virsh detach-device guest01 controller.xml
error: Failed to detach device from controller.xml
error: operation failed: controller scsi:0 not found
The qemuDomainXXtachPciControllerDevice routines made assumptions
that any caller had a PCI bus. These routines now selectively calls
PCI functions where necessary, and assigns the device information
type to one appropriate for the bus in use.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
For attach/detach of controller devices, we rename the functions to
remove 'PCI' from their title. The actual separation of PCI-specific
operations will be handled in the next patch.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
These changes allow the correct virtio-blk-device and virtio-net-device
devices to be used for the 'virt' machine type for armv7 rather than the
PCI virtio devices.
A test case was added to qemuxml2argvtest for this change.
Signed-off-by: Clark Laughlin <clark.laughlin@linaro.org>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/qemu/qemu_cgroup.c: Consistently use commas.
* src/qemu/qemu_command.c: Likewise.
* src/qemu/qemu_conf.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/qemu/qemu_monitor.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
On the domain startup, this function is called to dump some info about
the CPUs. At the beginning of the function we check if we aren't running
older qemu which is not exposing the CPUs via 'qom-list'. However, we
are not checking for even older qemus, which throw 'CommandNotFound'
error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Report the error in virPortAllocatorAcquire instead
of doing it in every caller.
The error contains the port range name instead of the intended
use for the port, e.g.:
Unable to find an unused port in range 'display' (65534-65535)
instead of:
Unable to find an unused port for SPICE
This also adds error reporting when the QEMU driver could not
find an unused port for VNC, VNC WebSockets or NBD migration.
QEMU 1.6.0 introduced new migration status: setup
Libvirt does not expect such string in QMP and refuses to migrate with error
"unexpected migration status in setup"
This patch fixes it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1025108
So far qemuSetupHostdevCGroup was called very early during hotplug, even
before we knew the device we were about to hotplug was actually
available. By calling the function later, we make sure QEMU won't be
allowed to access devices used by other domains.
Another important effect of this change is that hopluging USB devices
specified by vendor and product (but not by their USB address) works
again. This was broken since v1.0.5-171-g7d763ac, when the call to
qemuFindHostdevUSBDevice was moved after the call to
qemuSetupHostdevCGroup, which then used an uninitialized USB address.
https://bugzilla.redhat.com/show_bug.cgi?id=1018267
The aim of virObject refing and urefing is to tell where the object is
to be used and when is no longer needed. Hence any object shouldn't be
used after it has been unrefed, as we might be the last to hold the
reference. The better way is to call virObjectUnref() *after* the last
object usage. In this specific case, the monitor EOF handler was called
after the qemuMonitorIO called virObjectUnref. Not only that @mon was
disposed (which is not used in the handler anyway) but the @mon->vm
which is causing a SIGSEGV:
2013-11-15 10:17:54.425+0000: 20110: error : qemuMonitorIO:688 : internal error: early end of file from monitor: possible problem:
qemu-kvm: -incoming tcp:01.01.01.0:49152: Failed to bind socket: Cannot assign requested address
Program received signal SIGSEGV, Segmentation fault.
qemuProcessHandleMonitorEOF (mon=<optimized out>, vm=0x7fb728004170) at qemu/qemu_process.c:299
299 if (priv->beingDestroyed) {
(gdb) p *priv
Cannot access memory at address 0x0
(gdb) p vm
$1 = (virDomainObj *) 0x7fb728004170
(gdb) p *vm
$2 = {parent = {parent = {magic = 3735928559, refs = 0, klass = 0xdeadbeef}, lock = {lock = {__data = {__lock = 2, __count = 0, __owner = 20110, __nusers = 1, __kind = 0, __spins = 0, __list = {__prev = 0x0,
__next = 0x0}}, __size = "\002\000\000\000\000\000\000\000\216N\000\000\001", '\000' <repeats 26 times>, __align = 2}}}, pid = 0, state = {state = 0, reason = 0}, autostart = 0, persistent = 0,
updated = 0, def = 0x0, newDef = 0x0, snapshots = 0x0, current_snapshot = 0x0, hasManagedSave = false, privateData = 0x0, privateDataFreeFunc = 0x0, taint = 304}
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the qemuProcessReconnectHelper() a new thread that does all the
interesting work is spawned. The rationale is to not block the daemon
startup process in case of unresponsive qemu. However, the thread
handler is a local variable which gets lost once the control goes out of
scope. Hence the thread gets leaked. We can avoid this if the thread
isn't made joinable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The QOM path in qemu that contains the CPUID registers of a running VM
may not be present (introduced in QEMU 1.5).
Since commit d94b781771 we have a regression with QEMU that don't
support reporting of the CPUID register state via the monitor as the
process startup code expects the path to exist.
This patch adds code that checks with the monitor if the requested path
already exists and uses it only in this case.
The 'none' machine type is something only intended for use
by libvirt probing capabilities. It isn't something that
is useful for running real VM instances. As such it should
not be exposed to users in the capabilities.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virQEMUCapsProbeQMPMachineTypes method iterates over machine
types copying them into the qemuCapsPtr object. It only updates
the qemuCaps->nmachinetypes value at the end though. So if OOM
occurs in the middle, the destructor of qemuCapsPtr will not
free the partially initialized machine types.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the managedsave image is corrupted, e.g. the XML part is, we fail to
parse it and throw an error, e.g.:
error: Failed to start domain jms8
error: XML error: missing security model when using multiple labels
This is okay, as we can't really start the machine and avoid undefined
qemu behaviour. On the other hand, the error message doesn't give a
clue to users what should they do. The consensus here would be to thrown
a warning to logs saying "Hey, you've got a corrupted file".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch moves some code in the qemuDomainAttachSCSIDisk
function. The check for the existence of a PCI address assigned
to the SCSI controller was moved in order to be executed only
when needed. The PCI address of a controller is not necessary
if QEMU_CAPS_DEVICE is supported.
This fixes issues with the hotplug of SCSI disks on pseries guests.
When adding support for Q35 guests, the code to assign a PCI address
to the primary video card was moved into Q35 and i440fx(PIIX3)
specific functions, but no fallback was kept for other machine types
that might have a video card.
This patch remedies that by assigning a PCI address to the primary
video card if it does not have any kind of address. In particular,
this fixes issues with pseries guests.
Signed-off-by: Vitor de Lima <vitor.lima@eldorado.org.br>
Signed-off-by: Laine Stump <laine@laine.org>
When starting a VM the qemu process may filter out some requested
features of a domain as it's not supported either by the host or by
qemu. Libvirt didn't check if this happened which might end up in
changing of the guest ABI when migrating.
The proof of concept implementation adds the check for the recently
introduced kvm_pv_unhalt cpuid feature bit. This feature depends on both
qemu and host kernel support and thus increase the possibility of guest
ABI breakage.
The linux kernel recently added support for paravirtual spinlock
handling to avoid performance regressions on overcomitted hosts. This
feature needs to be turned in the hypervisor so that the guest OS is
notified about the possible support.
This patch adds a new feature "paravirt-spinlock" to the XML and
supporting code to enable the "kvm_pv_unhalt" pseudo CPU feature in
qemu.
https://bugzilla.redhat.com/show_bug.cgi?id=1008989
Currently we were storing domain feature flags in a bit field as the
they were either enabled or disabled. New features such as paravirtual
spinlocks however can be tri-state as the default option may depend on
hypervisor version.
To allow storing tri-state feature state in the same place instead of
having to declare dedicated variables for each feature this patch
refactors the bit field to an array.
The qemu monitor supports retrieval of actual CPUID bits presented to
the guest using QMP monitor. Add APIs to extract these information and
tests for them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since 86d90b3a (yes, my patch; again) we are supporting NBD storage
migration. However, on error recovery path we got the steps reversed.
The correct order is: return NBD port to the virPortAllocator and then
either unlock the vm or remove it from the driver. Not vice versa.
==11192== Invalid write of size 4
==11192== at 0x11488559: qemuMigrationPrepareAny (qemu_migration.c:2459)
==11192== by 0x11488EA6: qemuMigrationPrepareDirect (qemu_migration.c:2652)
==11192== by 0x114D1509: qemuDomainMigratePrepare3Params (qemu_driver.c:10332)
==11192== by 0x519075D: virDomainMigratePrepare3Params (libvirt.c:7290)
==11192== by 0x1502DA: remoteDispatchDomainMigratePrepare3Params (remote.c:4798)
==11192== by 0x12DECA: remoteDispatchDomainMigratePrepare3ParamsHelper (remote_dispatch.h:5741)
==11192== by 0x5212127: virNetServerProgramDispatchCall (virnetserverprogram.c:435)
==11192== by 0x5211C86: virNetServerProgramDispatch (virnetserverprogram.c:305)
==11192== by 0x520A8FD: virNetServerProcessMsg (virnetserver.c:165)
==11192== by 0x520A9E1: virNetServerHandleJob (virnetserver.c:186)
==11192== by 0x50DA78F: virThreadPoolWorker (virthreadpool.c:144)
==11192== by 0x50DA11C: virThreadHelper (virthreadpthread.c:161)
==11192== Address 0x1368baa0 is 576 bytes inside a block of size 688 free'd
==11192== at 0x4A07F5C: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==11192== by 0x5079A2F: virFree (viralloc.c:580)
==11192== by 0x11456C34: qemuDomainObjPrivateFree (qemu_domain.c:267)
==11192== by 0x50F41B4: virDomainObjDispose (domain_conf.c:2034)
==11192== by 0x50C2991: virObjectUnref (virobject.c:262)
==11192== by 0x50F4CFC: virDomainObjListRemove (domain_conf.c:2361)
==11192== by 0x1145C125: qemuDomainRemoveInactive (qemu_domain.c:2087)
==11192== by 0x11488520: qemuMigrationPrepareAny (qemu_migration.c:2456)
==11192== by 0x11488EA6: qemuMigrationPrepareDirect (qemu_migration.c:2652)
==11192== by 0x114D1509: qemuDomainMigratePrepare3Params (qemu_driver.c:10332)
==11192== by 0x519075D: virDomainMigratePrepare3Params (libvirt.c:7290)
==11192== by 0x1502DA: remoteDispatchDomainMigratePrepare3Params (remote.c:4798)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
One of my previous patches (c7ac2519b7) did try to fix the issue when
domain dies too soon during migration. However, this clumsy approach was
missing removal of qemuProcessHandleMonitorDestroy resulting in double
unrefing of mon->vm and hence producing the daemon crash:
==11843== Invalid read of size 4
==11843== at 0x50C28C5: virObjectUnref (virobject.c:255)
==11843== by 0x1148F7DB: qemuMonitorDispose (qemu_monitor.c:258)
==11843== by 0x50C2991: virObjectUnref (virobject.c:262)
==11843== by 0x50C2D13: virObjectFreeCallback (virobject.c:388)
==11843== by 0x509C37B: virEventPollCleanupHandles (vireventpoll.c:583)
==11843== by 0x509C711: virEventPollRunOnce (vireventpoll.c:652)
==11843== by 0x509A620: virEventRunDefaultImpl (virevent.c:274)
==11843== by 0x520D21C: virNetServerRun (virnetserver.c:1112)
==11843== by 0x11F368: main (libvirtd.c:1513)
==11843== Address 0x13b88864 is 4 bytes inside a block of size 136 free'd
==11843== at 0x4A07F5C: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==11843== by 0x5079A2F: virFree (viralloc.c:580)
==11843== by 0x50C29E3: virObjectUnref (virobject.c:270)
==11843== by 0x114770E4: qemuProcessHandleMonitorDestroy (qemu_process.c:1103)
==11843== by 0x1148F7CB: qemuMonitorDispose (qemu_monitor.c:257)
==11843== by 0x50C2991: virObjectUnref (virobject.c:262)
==11843== by 0x50C2D13: virObjectFreeCallback (virobject.c:388)
==11843== by 0x509C37B: virEventPollCleanupHandles (vireventpoll.c:583)
==11843== by 0x509C711: virEventPollRunOnce (vireventpoll.c:652)
==11843== by 0x509A620: virEventRunDefaultImpl (virevent.c:274)
==11843== by 0x520D21C: virNetServerRun (virnetserver.c:1112)
==11843== by 0x11F368: main (libvirtd.c:1513)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far we are checking if qemu supports 'nbd-server-start'. This,
however, makes no sense on the source as nbd-server-* is used on the
destination. On the source the 'drive-mirror' is used instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since the 90139a62 commit the error is copied into mon->lastError but
it's never freed from there.
==31989== 395 bytes in 1 blocks are definitely lost in loss record 877 of 978
==31989== at 0x4A06C2B: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==31989== by 0x7EAF129: strdup (in /lib64/libc-2.15.so)
==31989== by 0x50D586C: virStrdup (virstring.c:554)
==31989== by 0x50976C1: virCopyError (virerror.c:191)
==31989== by 0x5097A35: virCopyLastError (virerror.c:312)
==31989== by 0x114909A9: qemuMonitorIO (qemu_monitor.c:690)
==31989== by 0x509BEDE: virEventPollDispatchHandles (vireventpoll.c:501)
==31989== by 0x509C701: virEventPollRunOnce (vireventpoll.c:648)
==31989== by 0x509A620: virEventRunDefaultImpl (virevent.c:274)
==31989== by 0x520D21C: virNetServerRun (virnetserver.c:1112)
==31989== by 0x11F368: main (libvirtd.c:1513)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If there's a migration cancelled, the bitmap of migration port should be
cleaned up too.
Signed-off-by: Zeng Junliang <zengjunliang@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Coverity complains that the call to virPCIDeviceDetach() in
qemuPrepareHostdevPCIDevices() doesn't check status return like
other calls. Seems this just was lurking until a recent change
to this module resulted in Coverity looking harder and finding
the issue. Introduced by 'a4efb2e33' when function was called
'pciReAttachDevice()'
Just added a ignore_value() since it doesn't appear to matter
if the call fails since we're on a failure path already.
Include reference of the VM object pointer and name in debug
logs for QEMU start/stop functions. Also make sure we log the
PID that we started, since it isn't available elsewhere in the
logs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In debugging a recent oVirt/libvirt race condition, I was very
frustrated by lack of logging in the job enter/exit code. This
patch adds some key data which would have been useful in by
debugging attempts.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The following sequence
1. Define a persistent QMEU guest
2. Start the QEMU guest
3. Stop libvirtd
4. Kill the QEMU process
5. Start libvirtd
6. List persistent guests
At the last step, the previously running persistent guest
will be missing. This is because of a race condition in the
QEMU driver startup code. It does
1. Load all VM state files
2. Spawn thread to reconnect to each VM
3. Load all VM config files
Only at the end of step 3, does the 'virDomainObjPtr' get
marked as "persistent". There is therefore a window where
the thread reconnecting to the VM will remove the persistent
VM from the list.
The easy fix is to simply switch the order of steps 2 & 3.
In addition to this though, we must only attempt to reconnect
to a VM which had a non-zero PID loaded from its state file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'error' cleanup block in qemuProcessReconnect() had a
'return' statement in the middle of it. This caused a leak
of virConnectPtr & virQEMUDriverConfigPtr instances. This
was identified because netcf recently started checking its
refcount in libvirtd shutdown:
netcfStateCleanup:109 : internal error: Attempt to close netcf state driver with open connections
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When adding an automatically allocated port to a well-formed migration
URI, keep it well-formed:
tcp://1.2.3.4/ -> tcp://1.2.3.4/:12345 # wrong
tcp://1.2.3.4/ -> tcp://1.2.3.4:12345/ # fixed
tcp://1.2.3.4 -> tcp://1.2.3.4:12345 # still works
tcp:1.2.3.4 -> tcp:1.2.3.4:12345 # still works (old syntax)
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Expand the "secmodel" XML fragment of "host" with a sequence of
baselabel's which describe the default security context used by
libvirt with a specific security model and virtualization type:
<secmodel>
<model>selinux</model>
<doi>0</doi>
<baselabel type='kvm'>system_u:system_r:svirt_t:s0</baselabel>
<baselabel type='qemu'>system_u:system_r:svirt_tcg_t:s0</baselabel>
</secmodel>
<secmodel>
<model>dac</model>
<doi>0</doi>
<baselabel type='kvm'>107:107</baselabel>
<baselabel type='qemu'>107:107</baselabel>
</secmodel>
"baselabel" is driver-specific information, e.g. in the DAC security
model, it indicates USER_ID:GROUP_ID.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch (and the two patches that precede it) resolve:
https://bugzilla.redhat.com/show_bug.cgi?id=1005682
When libvirt was changed to delay the final cleanup of device removal
until the qemu process had signaled it with a DEVICE_DELETED event for
that device, the hostdev removal function
(qemuDomainRemoveHostDevice()) was written to properly handle the
removal of a hostdev that was actually an SRIOV virtual function
(defined with <interface type='hostdev'>). However, the function used
to search for a device matching the alias name provided in the
DEVICE_DELETED message (virDomainDefFindDevice()) would search through
the list of netdevs before hostdevs, so qemuDomainRemoveHostDevice()
was never called; instead the netdev function,
qemuDomainRemoveNetDevice() (which *doesn't* properly cleanup after
removal of <interface type='hostdev'>), was called.
(As a reminder - each <interface type='hostdev'> results in a
virDomainNetDef which contains a virDomainHostdevDef having a parent
type of VIR_DOMAIN_DEVICE_NET, and parent.data.net pointing back to
the virDomainNetDef; both Defs point to the same device info object
(and the info contains the device's "alias", which is used by qemu to
identify the device). The virDomainHostdevDef is added to the domain's
hostdevs list *and* the virDomainNetDef is added to the domain's nets
list, so searching either list for a particular alias will yield a
positive result.)
This function modifies the qemuDomainRemoveNetDevice() to short
circuit itself and call qemu DomainRemoveHostDevice() instead when the
actual device is a VIR_DOMAIN_NET_TYPE_HOSTDEV (similar logic to what
is done in the higher level qemuDomainDetachNetDevice())
Note that even if virDomainDefFindDevice() changes in the future so
that it finds the hostdev entry first, the current code will continue
to work properly.
This function was called in three places, and in each the call was
qualified by a slightly different conditional. In reality, this
function should only be called for a hostdev if all of the following
are true:
1) mode='subsystem'
2) type='pci'
3) there is a parent device definition which is an <interface>
(VIR_DOMAIN_DEVICE_NET)
We can simplify the callers and make them more consistent by checking
these conditions at the top ov qemuDomainHostdevNetConfigRestore and
returning 0 if one of them isn't satisfied.
The location of the call to qemuDomainHostdevNetConfigRestore() has
also been changed in the hot-plug case - it is moved into the caller
of its previous location (i.e. from qemuDomainRemovePCIHostDevice() to
qemuDomainRemoveHostDevice()). This was done to be more consistent
about which functions pay attention to whether or not this is one of
the special <interface> hostdevs or just a normal hostdev -
qemuDomainRemoveHostDevice() already contained a call to
networkReleaseActualDevice() and virDomainNetDefFree(), so it makes
sense for it to also handle the resetting of the device's MAC address
and vlan tag (which is what's done by
qemuDomainHostdevNetConfigRestore()).
Most of the usage of getuid()/getgid() is in cases where we are
considering what privileges we have. As such the code should be
using the effective IDs, not real IDs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When running setuid, we must be careful about what env vars
we allow commands to inherit from us. Replace the
virCommandAddEnvPass function with two new ones which do
filtering
virCommandAddEnvPassAllowSUID
virCommandAddEnvPassBlockSUID
And make virCommandAddEnvPassCommon use the appropriate
ones
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit e3ef20d7 allows user to configure migration ports range via
qemu.conf. However, it forgot to update augeas definition file and
even the test data was malicious.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1019053
When we migrate vms concurrently, there's a chance that libvirtd on
destination assigns the same port for different migrations, which will
lead to migration failure during prepare phase on destination. So we use
virPortAllocator here to solve the problem.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The header definition didn't match the function declaration, so adjusted
header to reflect the definition.
Found during a Coverity build where STATIC_ANALYSIS is enabled resulting
in the internal.h adding __nonnull__ handling to arguments.
Commit '6d264c91' added support for the qemuMonitorJSONDrivePivot() and
commit 'fbc3adc9' added a corresponding test which ended up triggering
the build failure which I didn't notice until today!
QEMU has support for SASL auth for SPICE guests, but libvirt
has no way to enable it. Following the example from VNC where
it is globally enabled via qemu.conf
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The last argument of memmove is the amount of bytes to be moved. The
amount is in Bytes. We are moving some void pointers around. However,
since sizeof(void *) is not Byte on any architecture, we've got the
arithmetic wrong.
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up offenders in src/qemu.
* src/qemu/qemu_bridge_filter.h (networkAllowMacOnPort)
(networkDisallowMacOnPort): Use intended type.
* src/qemu/qemu_bridge_filter.c (networkAllowMacOnPort)
(networkDisallowMacOnPort): Likewise.
* src/qemu/qemu_command.c (qemuBuildTPMBackendStr)
(qemuBuildTPMDevStr, qemuBuildCpuArgStr)
(qemuBuildObsoleteAccelArg, qemuBuildMachineArgStr)
(qemuBuildSmpArgStr, qemuBuildNumaArgStr): Likewise.
* src/qemu/qemu_conf.c (qemuSharedDeviceEntryCopy): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSaveImageStartVM): Likewise.
* src/qemu/qemu_hostdev.c
(qemuDomainHostdevNetConfigVirtPortProfile): Likewise.
* src/qemu/qemu_monitor_json.c
(qemuMonitorJSONAttachCharDevCommand): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up offenders in src/conf/domain_conf, and their fallout.
Several things to note: virObjectLock() requires a non-const
argument; if this were C++, we could treat the locking field
as 'mutable' and allow locking an otherwise 'const' object, but
that is a more invasive change, so I instead dropped attempts
to be const-correct on domain lookup. virXMLPropString and
friends require a non-const xmlNodePtr - this is because libxml2
is not a const-correct library. We could make the src/util/virxml
wrappers cast away const, but I figured it was easier to not
try to mark xmlNodePtr as const. Finally, virDomainDeviceDefCopy
was a rather hard conversion - it calls virDomainDeviceDefPostParse,
which in turn in the xen driver was actually modifying the domain
outside of the current device being visited. We should not be
adding a device on the first per-device callback, but waiting until
after all per-device callbacks are complete.
* src/conf/domain_conf.h (virDomainObjListFindByID)
(virDomainObjListFindByUUID, virDomainObjListFindByName)
(virDomainObjAssignDef, virDomainObjListAdd): Drop attempt at
const.
(virDomainDeviceDefCopy): Use intended type.
(virDomainDeviceDefParse, virDomainDeviceDefPostParseCallback)
(virDomainVideoDefaultType, virDomainVideoDefaultRAM)
(virDomainChrGetDomainPtrs): Make const-correct.
* src/conf/domain_conf.c (virDomainObjListFindByID)
(virDomainObjListFindByUUID, virDomainObjListFindByName)
(virDomainDeviceDefCopy, virDomainObjListAdd)
(virDomainObjAssignDef, virDomainHostdevSubsysUsbDefParseXML)
(virDomainHostdevSubsysPciOrigStatesDefParseXML)
(virDomainHostdevSubsysPciDefParseXML)
(virDomainHostdevSubsysScsiDefParseXML)
(virDomainControllerModelTypeFromString)
(virDomainTPMDefParseXML, virDomainTimerDefParseXML)
(virDomainSoundCodecDefParseXML, virDomainSoundDefParseXML)
(virDomainWatchdogDefParseXML, virDomainRNGDefParseXML)
(virDomainMemballoonDefParseXML, virDomainNVRAMDefParseXML)
(virSysinfoParseXML, virDomainVideoAccelDefParseXML)
(virDomainVideoDefParseXML, virDomainHostdevDefParseXML)
(virDomainRedirdevDefParseXML)
(virDomainRedirFilterUsbDevDefParseXML)
(virDomainRedirFilterDefParseXML, virDomainIdMapEntrySort)
(virDomainIdmapDefParseXML, virDomainVcpuPinDefParseXML)
(virDiskNameToBusDeviceIndex, virDomainDeviceDefCopy)
(virDomainVideoDefaultType, virDomainHostdevAssignAddress)
(virDomainDeviceDefPostParseInternal, virDomainDeviceDefPostParse)
(virDomainChrGetDomainPtrs, virDomainControllerSCSINextUnit)
(virDomainSCSIDriveAddressIsUsed)
(virDomainDriveAddressIsUsedByDisk)
(virDomainDriveAddressIsUsedByHostdev): Fix fallout.
* src/openvz/openvz_driver.c (openvzDomainDeviceDefPostParse):
Likewise.
* src/libxl/libxl_domain.c (libxlDomainDeviceDefPostParse):
Likewise.
* src/qemu/qemu_domain.c (qemuDomainDeviceDefPostParse)
(qemuDomainDefaultNetModel): Likewise.
* src/lxc/lxc_domain.c (virLXCDomainDeviceDefPostParse):
Likewise.
* src/uml/uml_driver.c (umlDomainDeviceDefPostParse): Likewise.
* src/xen/xen_driver.c (xenDomainDeviceDefPostParse): Split...
(xenDomainDefPostParse): ...since per-device callback is not the
time to be adding a device.
Signed-off-by: Eric Blake <eblake@redhat.com>
virDomainChrGetDomainPtrs() required 4 levels of pointers (taking
a parameter that will be used as an output variable to return the
address of another variable that contains an array of pointers).
This is rather complex to reason about, especially when outside
of the domain_conf file, no other caller should be modifying
the resulting array of pointers directly. Changing the public
signature gives something is easier to reason with, and actually
make const-correct; which is important as it was the only function
that was blocking virDomainDeviceDefCopy from treating its source
as const.
* src/conf/domain_conf.h (virDomainChrGetDomainPtrs): Use simpler
types, and make const-correct for external users.
* src/conf/domain_conf.c (virDomainChrGetDomainPtrs): Split...
(virDomainChrGetDomainPtrsInternal): ...into an internal version
that lets us modify terms, vs. external form that is read-only.
(virDomainDeviceDefPostParseInternal, virDomainChrFind)
(virDomainChrInsert): Adjust callers.
* src/qemu/qemu_command.c (qemuGetNextChrDevIndex): Adjust caller.
(qemuDomainDeviceAliasIndex): Make const-correct.
Signed-off-by: Eric Blake <eblake@redhat.com>
The regular save image code has the support to compress images using a
specified algorithm. This was not implemented for external checkpoints
although it shares most of the backend code.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1017227
The regular save image code has the support to compress images using a
specified algorithm. This was not implemented for managed save although
it shares most of the backend code.
After my patches, some functions gained one more argument
(@listenAddress) which wasn't included in debug printing of
arguments they were called with. Functions in question are:
qemuMigrationPrepareDirect and qemuMigrationPerform.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I've noticed a SIGSEGV-ing libvirtd on the destination when the qemu
died too quickly = in Prepare phase. What is happening here is:
1) [Thread 3493] We are in qemuMigrationPrepareAny() and calling
qemuProcessStart() which subsequently calls qemuProcessWaitForMonitor()
and qemuConnectMonitor(). So far so good. The qemuMonitorOpen()
succeeds, however switching monitor to QMP mode fails as qemu died
meanwhile. That is qemuMonitorSetCapabilities() returns -1.
2013-10-08 15:54:10.629+0000: 3493: debug : qemuMonitorSetCapabilities:1356 : mon=0x14a53da0
2013-10-08 15:54:10.630+0000: 3493: debug : qemuMonitorJSONCommandWithFd:262 : Send command '{"execute":"qmp_capabilities","id":"libvirt-1"}' for write with FD -1
2013-10-08 15:54:10.630+0000: 3493: debug : virEventPollUpdateHandle:147 : EVENT_POLL_UPDATE_HANDLE: watch=17 events=13
...
2013-10-08 15:54:10.631+0000: 3493: debug : qemuMonitorSend:956 : QEMU_MONITOR_SEND_MSG: mon=0x14a53da0 msg={"execute":"qmp_capabilities","id":"libvirt-1"}
fd=-1
2013-10-08 15:54:10.631+0000: 3262: debug : virEventPollRunOnce:641 : Poll got 1 event(s)
2) [Thread 3262] The event loop is trying to do the talking to monitor.
However, qemu is dead already, remember?
2013-10-08 15:54:13.436+0000: 3262: error : qemuMonitorIORead:551 : Unable to read from monitor: Connection reset by peer
2013-10-08 15:54:13.516+0000: 3262: debug : virFileClose:90 : Closed fd 25
...
2013-10-08 15:54:13.533+0000: 3493: debug : qemuMonitorSend:968 : Send command resulted in error internal error: early end of file from monitor: possible problem:
3) [Thread 3493] qemuProcessStart() failed. No big deal. Go to the
'endjob' label and subsequently to the 'cleanup'. Since the domain is
not persistent and ret is -1, the qemuDomainRemoveInactive() is called.
This has an (unpleasant) effect of virObjectUnref()-in the @vm object.
Unpleasant because the event loop which is about to trigger EOF callback
still holds a pointer to the @vm (not the reference). See the valgrind
output below.
4) [Thread 3262] So the event loop starts triggering EOF:
2013-10-08 15:54:13.542+0000: 3262: debug : qemuMonitorIO:729 : Triggering EOF callback
2013-10-08 15:54:13.543+0000: 3262: debug : qemuProcessHandleMonitorEOF:294 : Received EOF on 0x14549110 'migt10'
And the monitor is cleaned up. This results in calling
qemuProcessHandleMonitorEOF with the @vm pointer passed. The pointer is
kept in qemuMonitor struct.
==3262== Thread 1:
==3262== Invalid read of size 4
==3262== at 0x77ECCAA: pthread_mutex_lock (in /lib64/libpthread-2.15.so)
==3262== by 0x52FAA06: virMutexLock (virthreadpthread.c:85)
==3262== by 0x52E3891: virObjectLock (virobject.c:320)
==3262== by 0x11626743: qemuProcessHandleMonitorEOF (qemu_process.c:296)
==3262== by 0x11642593: qemuMonitorIO (qemu_monitor.c:730)
==3262== by 0x52BD526: virEventPollDispatchHandles (vireventpoll.c:501)
==3262== by 0x52BDD49: virEventPollRunOnce (vireventpoll.c:648)
==3262== by 0x52BBC68: virEventRunDefaultImpl (virevent.c:274)
==3262== by 0x542D3D9: virNetServerRun (virnetserver.c:1112)
==3262== by 0x11F368: main (libvirtd.c:1513)
==3262== Address 0x14549128 is 24 bytes inside a block of size 136 free'd
==3262== at 0x4C2AF5C: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==3262== by 0x529B1FF: virFree (viralloc.c:580)
==3262== by 0x52E3703: virObjectUnref (virobject.c:270)
==3262== by 0x531557E: virDomainObjListRemove (domain_conf.c:2355)
==3262== by 0x1160E899: qemuDomainRemoveInactive (qemu_domain.c:2061)
==3262== by 0x1163A0C6: qemuMigrationPrepareAny (qemu_migration.c:2450)
==3262== by 0x1163A923: qemuMigrationPrepareDirect (qemu_migration.c:2626)
==3262== by 0x11682D71: qemuDomainMigratePrepare3Params (qemu_driver.c:10309)
==3262== by 0x53B0976: virDomainMigratePrepare3Params (libvirt.c:7266)
==3262== by 0x1502D3: remoteDispatchDomainMigratePrepare3Params (remote.c:4797)
==3262== by 0x12DECA: remoteDispatchDomainMigratePrepare3ParamsHelper (remote_dispatch.h:5741)
==3262== by 0x54322EB: virNetServerProgramDispatchCall (virnetserverprogram.c:435)
The mon->vm is set in qemuMonitorOpenInternal() which is the correct
place to increase @vm ref counter. The correct place to decrease the ref
counter is then qemuMonitorDispose().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This configuration knob is there to override default listen address for
-incoming for all qemu domains.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=994364
Whenever we check for ABI stability, we have new xml (e.g. provided by
user, or obtained from snapshot, whatever) which we compare to old xml
and see if ABI won't break. However, if the new xml was produced via
virDomainGetXMLDesc(..., VIR_DOMAIN_XML_MIGRATABLE) it lacks some
devices, e.g. 'pci-root' controller. Hence, the ABI stability check
fails even though it is stable. Moreover, we can't simply fix
virDomainDefCheckABIStability because removing the correct devices is
task for the driver. For instance, qemu driver wants to remove the usb
controller too, while LXC driver doesn't. That's why we need special
qemu wrapper over virDomainDefCheckABIStability which removes the
correct devices from domain XML, produces MIGRATABLE xml and calls the
check ABI stability function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
At the beginning of the function qemuPrepareHostdevPCICheckSupport() is
called. After that @pcidevs is initialized. However, if the very first
command fails, we go to 'cleanup' label where virObjectUnref(pcidevs) is
called. Obviously, it is called before @pcidevs was able to get
initialized. Compiler warns about it:
CC qemu/libvirt_driver_qemu_impl_la-qemu_hostdev.lo
qemu/qemu_hostdev.c: In function 'qemuPrepareHostdevPCIDevices':
qemu/qemu_hostdev.c:824:19: error: 'pcidevs' may be used uninitialized in this function [-Werror=maybe-uninitialized]
virObjectUnref(pcidevs);
^
cc1: all warnings being treated as errors
Prefer using VFIO (if available) to the legacy KVM device passthrough.
With this patch a PCI passthrough device without the driver configured
will be started with VFIO if it's available on the host. If not legacy
KVM passthrough is checked and error is reported if it's not available.
Add code to check availability of PCI passhthrough using VFIO and the
legacy KVM passthrough and use it when starting VMs and hotplugging
devices to live machine.
The virConnectPtr is passed around loads of nwfilter code in
order to provide it as a parameter to the callback registered
by the virt drivers. None of the virt drivers use this param
though, so it serves no purpose.
Avoiding the need to pass a virConnectPtr means that the
nwfilterStateReload method no longer needs to open a bogus
QEMU driver connection. This addresses a race condition that
can lead to a crash on startup.
The nwfilter driver starts before the QEMU driver and registers
some callbacks with DBus to detect firewalld reload. If the
firewalld reload happens while the QEMU driver is still starting
up though, the nwfilterStateReload method will open a connection
to the partially initialized QEMU driver and cause a crash.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1012824https://bugzilla.redhat.com/show_bug.cgi?id=1012834
Note that a similar problem was reported in:
https://bugzilla.redhat.com/show_bug.cgi?id=827519
but the fix only worked for <interface type='hostdev'>, *not* for
<interface type='network'> where the network itself was a pool of
hostdevs.
The symptom in both cases was this error message:
internal error: Unable to determine device index for network device
In both cases the cause was lack of proper handling for netdevs
(<interface>) of type='hostdev' when scanning the netdev list looking
for alias names in qemuAssignDeviceNetAlias() - those that aren't
type='hostdev' have an alias of the form "net%d", while those that are
hostdev use "hostdev%d". This special handling was completely lacking
prior to the fix for Bug 827519 which was:
When searching for the highest alias index, libvirt looks at the alias
for each netdev and if it is type='hostdev' it ignores the entry. If
the type is not hostdev, then it expects the "net%d" form; if it
doesn't find that, it fails and logs the above error message.
That fix works except in the case of <interface type='network'> where
the network uses hostdev (i.e. the network is a pool of VFs to be
assigned to the guests via PCI passthrough). In this case, the check
for type='hostdev' would fail because it was done as:
def->net[i]->type == VIR_DOMAIN_NET_TYPE_HOSTDEV
(which compares what was written in the config) when it actually
should have been:
virDomainNetGetActualType(def->net[i]) == VIR_DOMAIN_NET_TYPE_HOSTDEV
(which compares the type of netdev that was actually allocated from
the network at runtime).
Of course the latter wouldn't be of any use if the netdevs of
type='network' hadn't already acquired their actual network connection
yet, but manual examination of the code showed that this is never the
case.
While looking through qemu_command.c, two other places were found to
directly compare the net[i]->type field rather than getting actualType:
* qemuAssignDeviceAliases() - in this case, the incorrect comparison
would cause us to create a "net%d" alias for a netdev with
type='network' but actualType='hostdev'. This alias would be
subsequently overwritten by the proper "hostdev%d" form, so
everything would operate properly, but a string would be
leaked. This patch also fixes this problem.
* qemuAssignDevicePCISlots() - would defer assigning a PCI address to
a netdev if it was type='hostdev', but not for type='network +
actualType='hostdev'. In this case, the actual device usually hasn't
been acquired yet anyway, and even in the case that it has, there is
no practical difference between assigning a PCI address while
traversing the netdev list or while traversing the hostdev
list. Because changing it would be an effective NOP (but potentially
cause some unexpected regression), this usage was left unchanged.
When querying for kvm, we try to find 'enabled' field. Hence the error
message should report we haven't found 'enabled' and not 'running'
(which is not even in the reply). Probably a typo or copy-paste error.
The qemuDomainChangeNet() is called when 'virsh update-device' is
invoked on a NIC. Currently, we fail to update the QoS even though
we have routines for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This basically covers the talking-to-monitor part of
virQEMUCapsInitQMP. The patch itself has no real value,
but it creates an entity to be tested in the next patches.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The change in ef29de14c3 that introduced
better error logging from qemu introduced a warning from coverity about
unused return value from lseek. Silence this warning and fix typo in the
corresponding error message.
Reported by: John Ferlan
https://bugzilla.redhat.com/show_bug.cgi?id=1011330 (case A)
While activeScsiHostdevs and webSocketPorts were allocated in
qemuStateInitialize, they were not freed in qemuStateCleanup.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1011330 (case D)
qemuProcessStart created two references to virQEMUDriverConfigPtr before
calling fork():
cfg = virQEMUDriverGetConfig(driver);
...
hookData.cfg = virObjectRef(cfg);
However, the child only unreferenced hookData.cfg and the parent only
removed the cfg reference. That said, we don't need to increment the
reference counter when assigning cfg to hookData. Both the child and the
parent will correctly remove the reference on cfg (the child will do
that through hookData).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The return value of virDomainControllerFind >=0 means that
the specific controller was found.
But some functions invoke it and treat 0 as not found.
This patch fix these incorrect invocation.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
If qemuParseCommandLine finds an arg it does not understand
it adds it to the QEMU passthrough custom arg list. If the
qemuParseCommandLine method hits an error for any reason
though, it just does 'VIR_FREE(cmd)' on the custom arg list.
This means all actual args / env vars are leaked. Introduce
a qemuDomainCmdlineDefFree method to be used for cleanup.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the call to virDomainControllerInsert fails in
qemuParseCommandLine, the controller struct is leaked.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'qemuStringToArgvEnv' method splits up a string of command
line env/args to an 'arglist' array. It then copies env vars
to a 'progenv' array and args to a 'progargv' array. When
copyin the env vars, it NULL-ifies the element in 'arglist'
that is copied.
Upon OOM the 'virStringListFree' is called on progenv and
arglist. Unfortunately, because the elements in 'arglist'
related to env vars have been set to NULL, the call to
virStringListFree(arglist) doesn't free anything, even
though some non-NULL args vars still exist later in the
array.
To fix this leak, stop NULL-ifying the 'arglist' elements,
and change the cleanup code to only free elements in the
'arglist' array, not 'progenv'.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In a number of places in qemuParseCommandLineDisk, an error
is reported, but no 'goto error' jump is used. This causes
failure to report OOM conditions to the caller.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If OOM occurs in qemuParseCommandLineDisk some intermediate
variables will be leaked when parsing Sheepdog or RBD disks.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qemuBuildCommandLine code for parsing sound cards will leak
an intermediate variable if an OOM occurs. Move the free'ing of
the variable earlier to avoid the leak.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In qemuParseNBDString, if the virURIParse fails, the
error is not reported to the caller. Instead execution
falls through to the non-URI codepath causing memory
leaks later on.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If qemuAddRBDHost fails due to parsing problems or OOM, then
qemuParseRBDString cleanup is skipped causing a memory leak.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
qemuDomainPCIAddressGetNextSlot has a loop for finding
compatible PCI buses. In the loop body it creates a
PCI address string, but never frees this. This causes
a leak if the loop executes more than one iteration,
or if a call in the loop body fails.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This resolves one of the issues listed in:
https://bugzilla.redhat.com/show_bug.cgi?id=1003983
00:1E.0 is the location of this controller on at least some actual Q35
hardware, so we try to replicate the placement. The bridge should work
just as well in any other location though, so if 00:1E.0 isn't
available, just allow it to be auto-assigned anywhere appropriate.
This resolves one of the issues in:
https://bugzilla.redhat.com/show_bug.cgi?id=1003983
This device is identical to qemu's "intel-hda" device (known as "ich6"
in libvirt), but has a different PCI device ID (which matches the ID
of the hda audio built into the ich9 chipset, of course). It's not
supported in earlier versions of qemu, so it requires a capability
bit.
I'm not sure why this code was written to compare the strings that it
had just retrieved from an enum->string conversion, rather than just
look at the original enum values, but this yields the same results,
and is much more efficient (especially as you add more devices).
This is a prerequisite for patches to resolve:
https://bugzilla.redhat.com/show_bug.cgi?id=1003983
Part of the resolution to:
https://bugzilla.redhat.com/show_bug.cgi?id=1003983
Although most devices available in qemu area defined as PCI devices,
and strictly speaking should only be attached via a PCI slot, in
practice qemu allows them to be attached to a PCIe slot and sometimes
this makes sense.
For example, The UHCI and EHCI USB controllers are usually attached
directly to the PCIe "root complex" (i.e. PCIe slots) on real
hardware, so that should be possible for a Q35-based qemu virtual
machine as well.
We still want to prefer a standard PCI slot when auto-assigning
addresses, though, and in general to disallow attaching PCI devices
via PCIe slots.
This patch makes that possible by adding a new
QEMU_PCI_CONNECT_TYPE_EITHER_IF_CONFIG flag. Three things are done
with this flag:
1) It is set for the "pcie-root" controller
2) qemuCollectPCIAddress() now has a set of nested switches that set
this "EITHER" flag for devices that we want to allow connecting to
pcie-root when specifically requested in the config.
3) qemuDomainPCIAddressFlagsCompatible() adds this new flag to the
"flagsMatchMask" if the address being checked came from config rather
than being newly auto-allocated by libvirt (this knowledge is
conveniently already available in the "fromConfig" arg).
Now any device having the EITHER flag set can be connected to
pcie-root if explicitly requested, but auto-allocated addresses for
those devices will still be standard PCI slots instead.
This patch only loosens the restrictions on devices that have been
specifically requested, but the setup is such that it should be fairly
easy to add new devices.
Replace them with switch cases. This will make it more efficient when
we add exceptions for more controller types, and other device types.
This is a prerequisite for patches to resolve:
https://bugzilla.redhat.com/show_bug.cgi?id=1003983
The previous patches added infrastructure to report better errors from
monitor in some cases. This patch finalizes this "feature" by enabling
this enhanced error reporting on early phases of VM startup. In these
phases the possibility of qemu producing a useful error message is
really high compared to running it during the whole life cycle. After
the start up is complete, the feature is disabled to provide the usual
error messages so that users are not confused by possibly irrelevant
messages that may be in the domain log.
The original motivation to do this enhancement is to capture errors when
using VFIO device passthrough, where qemu reports errors after the
monitor is initialized and the existing error catching code couldn't
catch this producing a unhelpful message:
# virsh start test
error: Failed to start domain test
error: Unable to read from monitor: Connection reset by peer
With this change, the message is changed to:
# virsh start test
error: Failed to start domain test
error: internal error: early end of file from monitor: possible problem:
qemu-system-x86_64: -device vfio-pci,host=00:1a.0,id=hostdev0,bus=pci.0,addr=0x5: vfio: error, group 8 is not viable, please ensure all devices within the iommu_group are bound to their vfio bus driver.
qemu-system-x86_64: -device vfio-pci,host=00:1a.0,id=hostdev0,bus=pci.0,addr=0x5: vfio: failed to get group 8
qemu-system-x86_64: -device vfio-pci,host=00:1a.0,id=hostdev0,bus=pci.0,addr=0x5: Device 'vfio-pci' could not be initialized
Change the monitor error code to add the ability to access the qemu log
file using a file descriptor so that we can dig in it for a more useful
error message. The error is now logged on monitor hangups and overwrites
a possible lesser error. A hangup on the monitor usualy means that qemu
has crashed and there's a significant chance it produced a useful error
message.
The functionality will be latent until the next patch.
Early VM startup errors usually produce a better error message in the
machine log file. Currently we were accessing it only when the process
exited during certain phases of startup. This will help adding a more
comprehensive error extraction for early qemu startup phases.
This patch adds infrastructure to keep a file descriptor for the machine
log file that will be used in case an error happens.
Teach the function to skip character device definitions printed by qemu
at startup in addition to libvirt log messages and make it usable from
outside of qemu_process.c. Also add documentation about the func.
The parsing of '-usb' did not check for failure of the
virDomainControllerInsert method. As a result on OOM, the
parser mistakenly attached USB disks to the IDE controller.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The code formatting NUMA args was ignoring the return value
of virBitmapFormat, so on OOM, it would silently drop the
NUMA cpumask arg.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When building boot menu args, if OOM occurred the CLI args
would end up containing 'order=(null)' due to a missing
call to 'virBufferError'.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qemuParseCommandLine method did not check the return value of
virStringSplit to see if OOM had occurred. This lead to dereference
of a NULL pointer on OOM.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Most callers of qemuParseKeywords were assigning its return
value to a 'size_t' variable. Then then also checked '< 0'
for error condition, but this will never be true with the
unsigned size_t variable. Rather than using 'ssize_t', change
qemuParseKeywords so that the element count is returned via
an output parameter, leaving the return value solely as an
error indicator.
This avoids a crash accessing beyond the end of an error
upon OOM.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In
commit 41b5505679
Author: Eric Blake <eblake@redhat.com>
Date: Wed Aug 28 15:01:23 2013 -0600
qemu: simplify list cleanup
The qemuStringToArgvEnv method was changed to use virStringFreeList
to free the 'arglist' array. This method assumes the string list
array is NULL terminated, however, qemuStringToArgvEnv was not
ensuring this when populating 'arglist'. This caused an out of
bounds access by virStringFreeList when OOM occured in the initial
loop of qemuStringToArgvEnv
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When parsing the RBD hosts, it increments the 'nhosts' counter
before increasing the 'hosts' array allocation. If an OOM then
occurs when increasing the array allocation, the cleanup block
will attempt to access beyond the end of the array. Switch
to using VIR_EXPAND_N instead of VIR_REALLOC_N to protect against
this mistake
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If OOM occurs in qemuDomainCCWAddressSetCreate, it jumps to
a cleanup block and frees the partially initialized object.
It then mistakenly returns the address of the just free'd
pointer instead of NULL.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since the wait is done during migration (still inside
QEMU_ASYNC_JOB_MIGRATION_OUT), the code should enter the monitor as such
in order to prohibit all other jobs from interfering in the meantime.
This patch fixes bug #1009886 in which qemuDomainGetBlockInfo was
waiting on the monitor condition and after GetSpiceMigrationStatus
mangled its internal data, the daemon crashed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1009886
This resolves https://bugzilla.redhat.com/show_bug.cgi?id=1008903
The Q35 machinetype has an implicit SATA controller at 00:1F.2 which
isn't given the "expected" id of ahci0 by qemu when it's created. The
original suggested solution to this problem was to not specify any
controller for the disks that use the default controller and just
specify "unit=n" instead; qemu should then use the first IDE or SATA
controller for the disk.
Unfortunately, this "solution" is ignorant of the fact that in the
case of SATA disks, the "unit" attribute in the disk XML is actually
*not* being used for the unit, but is instead used to specify the
"bus" number; each SATA controller has 6 buses, and each bus only
allows a single unit. This makes it nonsensical to specify unit='n'
where n is anything other than 0. It also means that the only way to
connect more than a single device to the implicit SATA controller is
to explicitly give the bus names, which happen to be "ide.$n", where
$n can be replaced by the disk's "unit" number.
virDomainSetBlockIoTuneEnsureACL was incorrectly called after we already
started a job. As a result of this, the job was not cleaned up when an
access driver had forbidden the action.
qemu/KVM also supports a tftp URL while specifying the cdrom ISO image.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='tftp' name='/url/path'>
<host name='host.name' port='69'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
The ftps protocol is another protocol supported by qemu/KVM while specifying
the cdrom ISO image.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='ftps' name='/url/path'>
<host name='host.name' port='990'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
The https protocol is also accepted by qemu/KVM when specifying the cdrom ISO
image.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='https' name='/url/path'>
<host name='host.name' port='443'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
If the ABI compatibility check with the "migratable" user XML is
successful, we would leak the originally parsed XML from the user that
would not be used in this case.
Reported by Ján Tomko.
The function implemented common behavior that can be reused for other
hypervisor drivers that use the virDomainObj data structures. Factor out
the core into a separate helper func.
The function implemented common behavior that can be reused for other
hypervisor drivers that use the virDomainObj data structures. Factor out
the core into a separate helper func.
In the original implementation of external checkpoints I've mistakenly
used the live definition to be stored in the save image. The normal
approach is to use the "migratable" definition. This was discovered when
commit 07966f6a8b changed the behavior to
use a converted XML from the user to do the compatibility check to fix
problem when using the regular machine saving.
As the previous patch added a compatibility layer, we can now change the
type of the XML in the image.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1008340
External checkpoints have a bug in the implementation where they use the
normal definition instead of the "migratable" one. This causes errors
when the snapshot is being reverted using the workaround method via
qemuDomainRestoreFlags() with a custom XML. This issue was introduced
when commit 07966f6a8b changed the code to
compare "migratable" XMLs from the user as we should have used
migratable in the image too.
This patch adds a compatibility layer, so that fixing the snapshot code
won't make existing snapshots fail to load.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1008340
qemuMigrationEatCookie has flags to control if these should
be parsed, but it does not fill mig->flags. These cookies might
get leaked if these flags are not set by qemuMigrationBakeCookie.
42 (32 direct, 10 indirect) bytes in 1 blocks are definitely lost in
loss record 361 of 662
==123== by 0x1BA33FCA: qemuMigrationEatCookie (qemu_migration.c:678)
==123== by 0x1BA34A1E: qemuMigrationRun (qemu_migration.c:3108)
==123== by 0x1BA3622B: doNativeMigrate (qemu_migration.c:3343)
==123== by 0x1BA3B408: qemuMigrationPerform (qemu_migration.c:4138)
When reverting a live internal snapshot with a live guest the ABI
compatiblity check was comparing a "migratable" definition with a normal
one. This resulted in the check failing with:
revert requires force: Target device address type none does not match source pci
This patch generates a "migratable" definition from the actual one to
check against the definition from the snapshot to avoid this problem.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1006886
Osier Yang pointed out that ever since commit 31cb030, the
signature of qemuDomainObjEndJob was changed to return a bool.
While comparison against 0 or > 0 still gives the right results,
it looks fishy; we also had one place that was comparing < 0
which is effectively dead code.
* src/qemu/qemu_migration.c (qemuMigrationPrepareAny): Fix dead
code bug.
(qemuMigrationBegin): Use more canonical form of bool check.
* src/qemu/qemu_driver.c (qemuAutostartDomain)
(qemuDomainCreateXML, qemuDomainSuspend, qemuDomainResume)
(qemuDomainShutdownFlags, qemuDomainReboot, qemuDomainReset)
(qemuDomainDestroyFlags, qemuDomainSetMemoryFlags)
(qemuDomainSetMemoryStatsPeriod, qemuDomainInjectNMI)
(qemuDomainSendKey, qemuDomainGetInfo, qemuDomainScreenshot)
(qemuDomainSetVcpusFlags, qemuDomainGetVcpusFlags)
(qemuDomainRestoreFlags, qemuDomainGetXMLDesc)
(qemuDomainCreateWithFlags, qemuDomainAttachDeviceFlags)
(qemuDomainUpdateDeviceFlags, qemuDomainDetachDeviceFlags)
(qemuDomainBlockResize, qemuDomainBlockStats)
(qemuDomainBlockStatsFlags, qemuDomainMemoryStats)
(qemuDomainMemoryPeek, qemuDomainGetBlockInfo)
(qemuDomainAbortJob, qemuDomainMigrateSetMaxDowntime)
(qemuDomainMigrateGetCompressionCache)
(qemuDomainMigrateSetCompressionCache)
(qemuDomainMigrateSetMaxSpeed)
(qemuDomainSnapshotCreateActiveInternal)
(qemuDomainRevertToSnapshot, qemuDomainSnapshotDelete)
(qemuDomainQemuMonitorCommand, qemuDomainQemuAttach)
(qemuDomainBlockJobImpl, qemuDomainBlockCopy)
(qemuDomainBlockCommit, qemuDomainOpenGraphics)
(qemuDomainGetBlockIoTune, qemuDomainGetDiskErrors)
(qemuDomainPMSuspendForDuration, qemuDomainPMWakeup)
(qemuDomainQemuAgentCommand, qemuDomainFSTrim): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Failure to attach to a domain during 'virsh qemu-attach' left
the list of domains in an odd state:
$ virsh qemu-attach 4176
error: An error occurred, but the cause is unknown
$ virsh list --all
Id Name State
----------------------------------------------------
2 foo shut off
$ virsh qemu-attach 4176
error: Requested operation is not valid: domain is already active as 'foo'
$ virsh undefine foo
error: Failed to undefine domain foo
error: Requested operation is not valid: cannot undefine transient domain
$ virsh shutdown foo
error: Failed to shutdown domain foo
error: invalid argument: monitor must not be NULL
It all stems from leaving the list of domains unmodified on
the initial failure; we should follow the lead of createXML
which removes vm on failure (the actual initial failure still
needs to be fixed in a later patch, but at least this patch
gets us to the point where we aren't getting stuck with an
unremovable "shut off" transient domain).
While investigating, I also found a leak in qemuDomainCreateXML;
the two functions should behave similarly. Note that there are
still two unusual paths: if dom is not allocated, the user will
see an OOM error even though the vm remains registered (but oom
errors already indicate tricky cleanup); and if the vm starts
and then quits again all before the job ends, it is possible
to return a non-NULL dom even though the dom will no longer be
useful for anything (but this at least lets the user know their
short-lived vm ran).
* src/qemu/qemu_driver.c (qemuDomainCreateXML): Don't leak vm on
failure to obtain job.
(qemuDomainQemuAttach): Match cleanup of qemuDomainCreateXML.
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, only X86 provides users CPU features with CPUID instruction.
If users specify the features for non-x86, it should tell users to
remove them.
This patch is to report one error if features are specified by
users for non-x86 platform.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
While debugging a failure of 'virsh qemu-attach', I noticed that
we were leaking the count of active domains on failure. This
means that a libvirtd session that is supposed to quit after
active domains disappear will hang around forever.
* src/qemu/qemu_process.c (qemuProcessAttach): Undo count of
active domains on failure.
Signed-off-by: Eric Blake <eblake@redhat.com>
In Fedora 19, 'qemu-kvm' is a simple wrapper that calls
'qemu-system-x86_64 -machine accel=kvm'. Attempting
to use 'virsh qemu-attach $pid' to a machine started as:
qemu-kvm -cdrom /var/lib/libvirt/images/foo.img \
-monitor unix:/tmp/demo,server,nowait -name foo \
--uuid cece4f9f-dff0-575d-0e8e-01fe380f12ea
was failing with:
error: XML error: No PCI buses available
because we did not see 'kvm' in the executable name read from
/proc/$pid/cmdline, and tried to assign os.machine as
"accel=kvm" instead of "pc"; this in turn led to refusal to
recognize the pci bus.
Noticed while investigating https://bugzilla.redhat.com/995312
although there are still other issues to fix before that bug
will be completely solved.
I've concluded that the existing parser code for native-to-xml
is a horrendous hodge-podge of ad-hoc approaches; I basically
rewrote the -machine section to be a bit saner.
* src/qemu/qemu_command.c (qemuParseCommandLine): Don't assume
-machine argument is always appropriate for os.machine; set
virtType if accel is present.
Signed-off-by: Eric Blake <eblake@redhat.com>
'virsh domxml-from-native' and 'virsh qemu-attach' could misbehave
for an emulator installed in (a somewhat unlikely) location
such as /usr/local/qemu-1.6/qemu-system-x86_64 or (an even less
likely) /opt/notxen/qemu-system-x86_64. Limit the strstr seach
to just the basename of the file where we are assuming details
about the binary based on its name.
While testing, I accidentally triggered a core dump during strcmp
when I forgot to set os.type on one of my code paths; this patch
changes such a coding error to raise a nicer internal error instead.
* src/qemu/qemu_command.c (qemuParseCommandLine): Compute basename
earlier.
* src/conf/domain_conf.c (virDomainDefPostParseInternal): Avoid
NULL deref.
Signed-off-by: Eric Blake <eblake@redhat.com>
CPU features are not supported on non-x86 and hasFeatures will be NULL.
This patch is to remove CPU features functions calling to avoid errors.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
The VIR_FREE() macro will cast away any const-ness. This masked a
number of places where we passed a 'const char *' string to
VIR_FREE. Fortunately in all of these cases, the variable was not
in fact const data, but a heap allocated string. Fix all the
variable declarations to reflect this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
No need to open code now that we have a nice function.
Interestingly, our virStringFreeList function is typed correctly
(a malloc'd list of malloc'd strings is NOT const, whether at the
point where it is created, or at the point where it is cleand up),
so using it with a 'const char **' argument would require a cast
to keep the compiler. I chose instead to remove const from code
even where we don't modify the argument, just to avoid the need
to cast.
* src/qemu/qemu_command.h (qemuParseCommandLine): Drop declaration.
* src/qemu/qemu_command.c (qemuParseProcFileStrings)
(qemuStringToArgvEnv): Don't force malloc'd result to be const.
(qemuParseCommandLinePid, qemuParseCommandLineString): Simplify
cleanup.
(qemuParseCommandLine, qemuFindEnv): Drop const-correctness to
avoid the need to cast in callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=999352
Since commit v1.0.5-56-g449e6b1 (Pull parsing of migration xml up into
QEMU driver APIs) any attempt to rename a domain during migration fails
with the following error message:
internal error Incoming cookie data had unexpected name DOM vs DOM2
This is because migration cookies always use the original domain name
and the mentioned commit failed to propagate the name back to
qemuMigrationPrepareAny.
Currently, kernel supports up to 8 queues for a multiqueue tap device.
However, if user tries to enter a huge number (e.g. one million) the tap
allocation fails, as expected. But what is not expected is the log full
of warnings:
warning : virFileClose:83 : Tried to close invalid fd 0
The problem is, upon error we iterate over an array of FDs (handlers to
queues) and VIR_FORCE_CLOSE() over each item. However, the array is
pre-filled with zeros. Hence, we repeatedly close stdin. Ouch.
But there's more. The queues allocation is done in virNetDevTapCreate()
which cleans up the FDs in case of error. Then, its caller, the
virNetDevTapCreateInBridgePort() iterates over the FD array and tries to
close them too. And so does qemuNetworkIfaceConnect() and
qemuBuildInterfaceCommandLine().
Starting with qemu 1.6, the qemu-system-arm vexpress-a9 model has a
hardcoded virtio-mmio transport which enables attaching all virtio
devices.
On the command line, we have to use virtio-XXX-device rather than
virtio-XXX-pci, thankfully s390 already set the precedent here so
it's fairly straight forward.
At the XML level, this adds a new device address type virtio-mmio.
The controller and addressing don't have any subelements at the
moment because we they aren't needed for this usecase, but could
be added later if needed.
Add a test case for an ARM guest with one of every virtio device
enabled.
Similar to the chardev bit, ARM boards depend on the old style '-net nic'
for actually instantiating net devices. But we can't block out
-netdev altogether since it's needed for upcoming virtio support.
And add tests for working ARM XML with console, disk, and networking.
This corresponds to '-sd' and '-drive if=sd' on the qemu command line.
Needed for many ARM boards which don't provide any other way to
pass in storage.
QEMU ARM boards don't give us any way to explicitly wire in
a -chardev, so use the old style -serial options.
Unfortunately this isn't as simple as just turning off the CHARDEV flag
for qemu-system-arm, as upcoming virtio support _will_ use device/chardev.
On my machine, a guest fails to boot if it has a sound card, but not
graphical device/display is configured, because pulseaudio fails to
initialize since it can't access $HOME.
A workaround is removing the audio device, however on ARM boards there
isn't any option to do that, so -nographic always fails.
Set QEMU_AUDIO_DRV=none if no <graphics> are configured. Unfortunately
this has massive test suite fallout.
Add a qemu.conf parameter nographics_allow_host_audio, that if enabled
will pass through QEMU_AUDIO_DRV from sysconfig (similar to
vnc_allow_host_audio)
Add an attribute named 'removable' to the 'target' element of disks,
which controls the removable flag. For instance, on a Linux guest it
controls the value of /sys/block/$dev/removable. This option is only
valid for USB disks (i.e. bus='usb'), and its default value is 'off',
which is the same behaviour as before.
To achieve this, 'removable=on' (or 'off') is appended to the '-device
usb-storage' parameter sent to qemu when adding a USB disk via
'-disk'. A capability flag QEMU_CAPS_USB_STORAGE_REMOVABLE was added
to keep track if this option is supported by the qemu version used.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=922495
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Allow use of the usb-storage device only if the new capability flag
QEMU_CAPS_DEVICE_USB_STORAGE is set, which it is for qemu(-kvm)
versions >= 0.12.1.2-rhel62-beta.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
vhost only works in KVM mode at the moment, and is infact compiled
out if the emulator is built for non-native architecture. While it
may work at some point in the future for plain qemu, for now it's
just noise on the command line (and which contributes to arm cli
breakage).
When using a <interface type="network"> that points to a network with
hostdev forwarding mode a hostdev alias is created for the network. This
allias is inserted into the hostdev list, but is backed with a part of
the network object that it is connected to.
When a VM is being stopped qemuProcessStop() calls
networkReleaseActualDevice() which eventually frees the memory for the
hostdev object. Afterwards when the domain definition is being freed by
virDomainDefFree() an invalid pointer is accessed by
virDomainHostdevDefFree() and may cause a crash of the daemon.
This patch removes the entry in the hostdev list before freeing the
depending memory to avoid this issue.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1000973
QEMU commit 3984890 introduced the "pci-hole64-size" property,
to i440FX-pcihost and q35-pcihost with a default setting of 2 GB.
Translate <pcihole64>x<pcihole64/> to:
-global q35-pcihost.pci-hole64-size=x for q35 machines and
-global i440FX-pcihost.pci-hole64-size=x for i440FX-based machines.
Error out on other machine types or if the size was specified
but the pcihost device lacks 'pci-hole64-size' property.
https://bugzilla.redhat.com/show_bug.cgi?id=990418
The ftp protocol is already recognized by qemu/KVM so add this support to
libvirt as well.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='ftp' name='/url/path'>
<host name='host.name' port='21'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
QEMU/KVM already allows a HTTP URL for the cdrom ISO image so add this support
to libvirt as well.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='http' name='/url/path'>
<host name='host.name' port='80'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
If there's no hard_limit set and domain uses VFIO we still must lock
the guest memory (prerequisite from qemu). Hence, we should compute
the amount to be locked from max_balloon.
When cpu hotplug fails without reporting an error, we would fail the
command but update the count of vCPUs anyways.
Commit 761fc48136 fixed the case when CPU
hot-unplug failed silently, but forgot to fix up the value in this case.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1000357
The virDomainOpenGraphics method accepts a UNIX socket FD from
the client app. It must set the label on this FD otherwise QEMU
will be prevented from receiving it with recvmsg.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If user requested multiqueue networking, beside multiple /dev/tap and
/dev/vhost-net openings, we forgot to pass mq=on onto the -device
virtio-net-pci command line. This is advised at:
http://www.linux-kvm.org/page/Multiqueue#Enable_MQ_feature
Re-arrange the code so that the returned bitmap is always initialized to
NULL even on early failures and return an error message as some callers
are already expecting it. Fix up the rest not to shadow the error.
https://bugzilla.redhat.com/show_bug.cgi?id=822052
When doing a live migration, if the destination fails for any
reason after the point in which files should be labeled, then
the cleanup of the destination would restore the labels to their
defaults, even though the source is still trying to continue
running with the image open. Bug 822052 mentioned one source
of live migration failure - a mismatch in SELinux virt_use_nfs
settings (on for source, off for destination); but I found other
situations that would also trigger it (for example, having a
graphics device tied to port 5999 on the source, and a different
domain on the destination already using that port, so that the
destination cannot reuse the port).
In short, just as cleanup of the source on a successful migration
must not relabel files (because the destination would be crippled
by the relabel), cleanup of the destination on a failed migration
must not relabel files (because the source would be crippled).
* src/qemu/qemu_process.c (qemuProcessStart): Set flag to avoid
label restoration when cleaning up on failed migration.
Signed-off-by: Eric Blake <eblake@redhat.com>
Each of the modules handled reporting error messages from the secret fetching
slightly differently with respect to the error. Provide a similar message
for each error case and provide as much data as possible.
Following XML would fail :
<disk type='network' device='lun'>
<driver name='qemu' type='raw'/>
<source protocol='iscsi' name='iqn.2013-07.com.example:iscsi/1'>
<host name='example.com' port='3260'/>
</source>
<target dev='sda' bus='scsi'/>
</disk>
With the message:
error: Failed to start domain iscsilun
error: Unable to get device ID 'iqn.2013-07.com.example:iscsi/1': No such fi
Cause was commit id '1f49b05a' which added 'virDomainDiskSourceIsBlockType'
If there's no hard_limit set and domain uses VFIO we still must lock the
guest memory (prerequisite from qemu). Hence, we should compute the
amount to be locked from max_balloon.
Since 16bcb3 we have a regression. The hard_limit is set
unconditionally. By default the limit is zero. Hence, if user hasn't
configured any, we set the zero in cgroup subsystem making the kernel
kill the corresponding qemu process immediately. The proper fix is to
set hard_limit iff user has configured any.
This function is to guess the correct limit for maximal memory
usage by qemu for given domain. This can never be guessed
correctly, not to mention all the pains and sleepless nights this
code has caused. Once somebody discovers algorithm to solve the
Halting Problem, we can compute the limit algorithmically. But
till then, this code should never see the light of the release
again.
Currently the virConnectBaselineCPU API does not expose the CPU features
that are part of the CPU's model. This patch adds a new flag,
VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES, that causes the API to explicitly
list all features that are part of that model.
Signed-off-by: Don Dugger <donald.d.dugger@intel.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Hotplugging a single SCSI device works, but adding additional ones
result in an error from QEMU:
[root@gpok197 ~]# virsh attach-device guest01 blah.xml
Device attached successfully
[root@gpok197 ~]# virsh attach-device guest01 blah2.xml
error: Failed to attach device from blah2.xml
error: internal error unable to execute QEMU command 'device_add': Duplicate ID 'hostdev0' for device
The hostdev ID that is created is always set to zero, regardless
of the contents of the XML. Changing the index in the hotplug case
to a negative one so the next available index is used.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Go through disks of guest, if one disk doesn't exist or its backing
chain is broken, with 'optional' startupPolicy, for CDROM and Floppy
we only discard its source path definition in xml, for disks we drop
it from disk list and free it.
This patch addresses two concerns with the error reporting when an
incompatible PCI address is specified for a device:
1) It wasn't always apparent which device had the problem. With this
patch applied, any error about an incompatible address will always
contain the full address as given in the config, so it will be easier
to determine which device's config aused the problem.
2) In some cases when the problem came from bad config, the error
message was erroneously classified as VIR_ERR_INTERNAL_ERROR. With
this patch applied, the same error message will be changed to indicate
either "internal" or "xml" error depending on whether the address came
from the config, or was automatically generated by libvirt.
Note that in the case of "internal" (due to bad auto-generation)
errors, the PCI address won't be of much use in finding the location
in config to change (because it was automatically generated). Of
course that makes perfect sense, but still the address could provide a
clue about a bug in libvirt attempting to use a type of pci bus that
doesn't have its flags set correctly (or something similar). In other
words, it's not perfect, but it is definitely better.
q35 machines have an implicit ahci (sata) controller at 00:1F.2 which
has no "id" associated with it. For this reason, we can't refer to it
as "ahci0". Instead, we don't give an id on the commandline, which
qemu interprets as "use the first ahci controller". We then need to
specify the unit with "unit=%d" rather than adding it onto the bus
arg.
https://bugzilla.redhat.com/show_bug.cgi?id=979477
Since 1.0.3 we are using the new way to copy non shared storage during
migration (the NBD way). However, whether the new or old way is used is
not controllable by user but unconditionally turned on if both sides of
migration support it. Moreover, the implementation is not complete: the
combination for VIR_MIGRATE_TUNNELLED flag is missing (as we need to
open new port on the destination) in which case we just error out. This
is a deadly combination: not letting users choose their destiny and
erroring out. We should not do that but VIR_WARN and turn the NBD off
instead.
We had been setting the device alias in the devinceinfo for pci
controllers to "pci%u", but then hardcoding "pci.%u" when creating the
device address for other devices using that pci bus. This all worked
just fine until we encountered the built-in "pcie.0" bus (the PCIe
root complex) in Q35 machines.
In order to create the correct commandline for this one case, this
patch:
1) sets the alias for PCI controllers correctly, to "pci.%u" (or
"pcie.%u" for the pcie-root controller)
2) eliminates the hardcoded "pci.%u" for pci controllers when
generatuing device address strings, and instead uses the controller's
alias.
3) plumbs a pointer to the virDomainDef all the way down to
qemuBuildDeviceAddressStr. This was necessary in order to make the
aliase of the controller *used by a device* available (previously
qemuBuildDeviceAddressStr only had the deviceinfo of the device
itself, *not* of the controller it was connecting to). This made for a
larger than desired diff, but at least in the future we won't have to
do it again, since all the information we could possibly ever need for
future enhancements is in the virDomainDef. (right?)
This should be done for *all* controllers, but for now we just do it
in the case of PCI controllers, to reduce the likelyhood of
regression.
This patch adds in special handling for a few devices that need to be
treated differently for q35 domains:
usb - there is no implicit/default usb controller for the q35
machinetype. This is done because normally the default usb controller
is added to a domain by just adding "-usb" to the qemu commandline,
and it's assumed that this will add a single piix3 usb1 controller at
slot 1 function 2. That's not what happens when the machinetype is
q35, though. Instead, adding -usb to the commandline adds 3 usb
(version 2) controllers to the domain at slot 0x1D.{1,2,7}. Rather
than having
<controller type='usb' index='0'/>
translate into 3 separate devices on the PCI bus, it's cleaner to not
automatically add a default usb device; one can always be added
explicitly if desired. Or we may decide that on q35 machines, 3 usb
controllers will be automatically added when none is given. But for
this initial commit, at least we aren't locking ourselves into
something we later won't want.
video - qemu always initializes the primary video device immediately
after any integrated devices for the machinetype. Unless instructed
otherwise (by using "-device vga..." instead of "-vga" which libvirt
uses in many cases to work around deficiencies and bugs in various
qemu versions) qemu will always pick the first unused slot. In the
case of the "pc" machinetype and its derivatives, this is always slot
2, but on q35 machinetypes, the first free slot is slot 1 (since the
q35's integrated peripheral devices are placed in other slots,
e.g. slot 0x1f). In order to make the PCI address of the video device
predictable, that slot (1 or 2, depending on machinetype) is reserved
even when no video device has been specified.
sata - a q35 machine always has a sata controller implicitly added at
slot 0x1F, function 2. There is no way to avoid this controller, so we
always add it. Note that the xml2xml tests for the pcie-root and q35
cases were changed to use DO_TEST_DIFFERENT() so that we can check for
the sata controller being automatically added. This is especially
important because we can't check for it in the xml2argv output (it has
no effect on that output since it's an implicit device).
ide - q35 has no ide controllers.
isa and smbus controllers - these two are always present in a q35 (at
slot 0x1F functions 0 and 3) but we have no way of modelling them in
our config. We do need to reserve those functions so that the user
doesn't attempt to put anything else there though. (note that the "pc"
machine type also has an ISA controller, which we also ignore).
This PCI controller, named "dmi-to-pci-bridge" in the libvirt config,
and implemented with qemu's "i82801b11-bridge" device, connects to a
PCI Express slot (e.g. one of the slots provided by the pcie-root
controller, aka "pcie.0" on the qemu commandline), and provides 31
*non-hot-pluggable* PCI (*not* PCIe) slots, numbered 1-31.
Any time a machine is defined which has a pcie-root controller
(i.e. any q35-based machinetype), libvirt will automatically add a
dmi-to-pci-bridge controller if one doesn't exist, and also add a
pci-bridge controller. The reasoning here is that any useful domain
will have either an immediate (startup time) or eventual (subsequent
hot-plug) need for a standard PCI slot; since the pcie-root controller
only provides PCIe slots, we need to connect a dmi-to-pci-bridge
controller to it in order to get a non-hot-plug PCI slot that we can
then use to connect a pci-bridge - the slots provided by the
pci-bridge will be both standard PCI and hot-pluggable.
Since pci-bridge devices themselves can not be hot-plugged into a
running system (although you can hot-plug other devices into a
pci-bridge's slots), any new pci-bridge controller that is added can
(and will) be plugged into the dmi-to-pci-bridge as long as it has
empty slots available.
This patch is also changing the qemuxml2xml-pcie test from a "DO_TEST"
to a "DO_DIFFERENT_TEST". This is so that the "before" xml can omit
the automatically added dmi-to-pci-bridge and pci-bridge devices, and
the "after" xml can include it - this way we are testing if libvirt is
properly adding these devices.
This controller is implicit on q35 machinetypes. It provides 31 PCIe
(*not* PCI) slots as controller 0.
Currently there are no devices that can connect to pcie-root, and no
implicit pci controller on a q35 machine, so q35 is still
unusable. For a usable q35 system, we need to add a
"dmi-to-pci-bridge" pci controller, which can connect to pcie-root,
and provides standard pci slots that can be used to connect other
devices.
Previous refactoring of the guest PCI address reservation/allocation
code allowed for slot types other than basic PCI (e.g. PCI express,
non-hotpluggable slots, etc) but would not auto-allocate a slot for a
device that required any type other than a basic hot-pluggable
PCI slot.
This patch refactors the code to be aware of different slot types
during auto-allocation of addresses as well - as long as there is an
empty slot of the required type, it will be found and used.
The piece that *wasn't* added is that we don't auto-create a new PCI
bus when needed for anything except basic PCI devices. This is because
there are multiple different types of controllers that can provide,
for example, a PCI express slot (in addition to the pcie-root
controller, these can also be found on a "root-port" or on a
"downstream-switch-port"). Since we currently don't support any PCIe
devices (except pending support for dmi-to-pci-bridge), we can defer
any decision on what to do about this.
* The functions qemuDomainPCIAddressReserveAddr and
qemuDomainPCIAddressReserveSlot were very similar (and should have
been more similar) and were about to get more code added to them which
would create even more duplicated code, so this patch gives
qemuDomainPCIAddressReserveAddr a "reserveEntireSlot" arg, then
replaces the body of qemuDomainPCIAddressReserveSlot with a call to
qemuDomainPCIAddressReserveAddr.
You will notice that addrs->lastaddr was previously set in
qemuDomainPCIAddressReserveAddr (but *not* set in
qemuDomainPCIAddressReserveSlot). For consistency and cleanliness of
code, that bit was removed and put into the one caller of
qemuDomainPCIAddressReserveAddr (there is a similar place where the
caller of qemuDomainPCIAddressReserveSlot sets lastaddr). This does
guarantee identical functionality to pre-patch code, but in practice
isn't really critical, because lastaddr is just keeping track of where
to start when looking for a free slot - if it isn't updated, we will
just start looking on a slot that's already occupied, then skip up to
one that isn't.
* qemuCollectPCIAddress was essentially doing the same thing as
qemuDomainPCIAddressReserveAddr, but with some extra special case
checking at the beginning. The duplicate code has been replaced with
a call to qemuDomainPCIAddressReserveAddr. This required adding a
"fromConfig" boolean, which is only used to change the log error
code from VIR_ERR_INTERNAL_ERROR (when the address was
auto-generated by libvirt) to VIR_ERR_XML_ERROR (when the address is
coming from the config); without this differentiation, it would be
difficult to tell if an error was caused by something wrong in
libvirt's auto-allocate code or just bad config.
* the bit of code in qemuDomainPCIAddressValidate that checks the
connect type flags is going to be used in a couple more places where
we don't need to also check the slot limits (because we're generating
the slot number ourselves), so that has been pulled out into a
separate qemuDomainPCIAddressFlagsCompatible function.
* qemuDomainPCIAddressSetNextAddr
The name of this function was confusing because 1) other functions in
the file that end in "Addr" are only operating on a single function of
one PCI slot, not the entire slot, while functions that do something
with the entire slot end in "Slot", and 2) it didn't contain a verb
describing what it is doing (the "Set" refers to the set that contains
all PCI buses in the system, used to keep track of which slots in
which buses are already reserved for use).
It is now renamed to qemuDomainPCIAddressReserveNextSlot, which more
clearly describes what it is doing. Arguably, it could have been
changed to qemuDomainPCIAddressSetReserveNextSlot, but 1) the word
"set" is confusing in this context because it could be intended as a
verb or as a noun, and 2) most other functions that operate on a
single slot or address within this set are also named
qemuDomainPCIAddress... rather than qemuDomainPCIAddressSet... Only
the Create, Free, and Grow functions for an address set (which modify the
entire set, not just one element) use "Set" in their name.
* qemuPCIAddressAsString, qemuPCIAddressValidate
All the other functions in this set are named
qemuDomainPCIAddressxxxxx, so I renamed these to be consistent.
The parser shouldn't be doing arch-specific things like adding in
implicit controllers to the config. This should instead be done in the
hypervisor's post-parse callback.
This patch removes the auto-add of a usb controller from the domain
parser, and puts it into the qemu driver's post-parse callback (just
as is already done with the auto-add of the pci-root controller). In
the future, any machine/arch that shouldn't have a default usb
controller added should just set addDefaultUSB = false in this
function.
We've recently seen that q35 and ARMV7L domains shouldn't get a default USB
controller, so I've set addDefaultUSB to false for both of those.
If upgrading from a libvirt that is older than 1.0.5, we can
not assume that vm->def->resource is non-NULL. This bogus
assumption caused libvirtd to crash
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
*src/util/virstoragefile.c: Add a helper function to get
the first name of missing backing files, if the name is NULL,
it means the diskchain is not broken.
*src/qemu/qemu_domain.c: qemuDiskChainCheckBroken(disk) to
check if its chain is broken
Refactor this function to make it focus on disk presence checking,
including diskchain checking, and not only for CDROM and Floppy.
This change is good for the following patches.
Make the virCgroupNewMachine method try to use systemd-machined
first. If that fails, then fallback to using the traditional
cgroup setup code path.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Although this isn't apparently needed for the guest agent itself, the
test I will be adding later depends on the newline as a separator of
messages to process.
The VIR_DOMAIN_PAUSED_GUEST_PANICKED constant is badly named,
leaking the QEMU event name. Elsewhere in the API we use
'CRASHED' rather than 'PANICKED', and the addition of 'GUEST'
is redundant since all events are guest related.
Thus rename it to VIR_DOMAIN_PAUSED_CRASHED, which matches
with VIR_DOMAIN_RUNNING_CRASHED and VIR_DOMAIN_EVENT_CRASHED.
It was added in commit 14e7e0ae8d
which post-dates v1.1.0, so is safe to rename before 1.1.1
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=981094
The commit 0ad9025ef introduce qemu flag QEMU_CAPS_DEVICE_VIDEO_PRIMARY
for using -device VGA, -device cirrus-vga, -device vmware-svga and
-device qxl-vga. In use, for -device qxl-vga, mouse doesn't display
in guest window like the desciption in above bug.
This patch try to use -device for primary video when qemu >=1.6 which
contains the bug fix patch
Instead of requiring drivers to use a combination of calls
to virCgroupNewDetect and virCgroupIsValidMachine, combine
the two into virCgroupNewDetectMachine
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Both virStoragePoolFree and virStorageVolFree reset the last error,
which might lead to the cryptic message:
An error occurred, but the cause is unknown
When the volume wasn't found, virStorageVolFree was called with NULL,
leading to an error:
invalid storage volume pointer in virStorageVolFree
This patch changes it to:
Storage volume not found: no storage vol with matching name 'tomato'
Function qemuOpenFile() haven't had any idea about seclabels applied
to VMs only, so in case the seclabel differed from the "user:group"
from configuration, there might have been issues with opening files.
Make qemuOpenFile() VM-aware, but only optionally, passing NULL
argument means skipping VM seclabel info completely.
However, all current qemuOpenFile() calls look like they should use VM
seclabel info in case there is any, so convert these calls as well.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=869053
Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports
all share the same namespace, they are all defined as controllers of
type='pci' in libvirt (but with a differing model attribute). Each of
these controllers has a certain connection type upstream, allows
certain connection types downstream, and each can either allow a
single downstream connection at slot 0, or connections from slot 1 -
31.
Right now, we only support the pci-root and pci-bridge devices, both
of which only allow PCI devices to connect, and both which have usable
slots 1 - 31. In preparation for adding other types of controllers
that have different capabilities, this patch 1) adds info to the
qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets
those capabilities appropriately for pci-root and pci-bridge devices,
and 3) validates that the controller being connected to is the proper
type when allocating slots or validating that a user-selected slot is
appropriate for a device..
Having this infrastructure in place will make it much easier to add
support for the other PCI controller types.
While it would be possible to do all the necessary checking by just
storing the controller model in the qemyuDomainPCIAddressBus, it
greatly simplifies all the validation code to also keep a "flags",
"minSlot" and "maxSlot" for each - that way we can just check those
attributes rather than requiring a nearly identical switch statement
everywhere we need to validate compatibility.
You may notice many places where the flags are seemingly hard-coded to
QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI
This is currently the correct value for all PCI devices, and in the
future will be the default, with small bits of code added to change to
the flags for the few devices which are the exceptions to this rule.
Finally, there are a few places with "FIXME" comments. Note that these
aren't indicating places that are broken according to the currently
supported devices, they are places that will need fixing when support
for new PCI controller models is added.
To assure that there was no regression in the auto-allocation of PCI
addresses or auto-creation of integrated pci-root, ide, and usb
controllers, a new test case (pci-bridge-many-disks) has been added to
both the qemuxml2argv and qemuxml2xml tests. This new test defines a
domain with several dozen virtio disks but no pci-root or
pci-bridges. The .args file of the new test case was created using
libvirt sources from before this patch, and the test still passes
after this patch has been applied.
Although these two enums are named ..._LAST, they really had the value
of ..._SIZE. This patch changes their values so that, e.g.,
QEMU_PCI_ADDRESS_SLOT_LAST really is the slot number of the last slot
on a PCI bus.
The implicit IDE, USB, and video controllers provided by the PIIX3
chipset in the pc-* machinetypes are not present on other
machinetypes, so we shouldn't be doing the special checking for
them. This patch places those validation checks into a separate
function that is only called for machine types that have a PIIX3 chip
(which happens to be the i440fx-based pc-* machine types).
One qemuxml2argv test data file had to be changed - the
pseries-usb-multi test had included a piix3-usb-uhci device, which was
being placed at a specific address, and also had slot 2 auto reserved
for a video device, but the pseries virtual machine doesn't actually
have a PIIX3 chip, so even if there was a piix3-usb-uhci driver for
it, the device wouldn't need to reside at slot 1 function 2. I just
changed the .argv file to have the generic slot info for the two
devices that results when the special PIIX3 code isn't executed.
qemuDomainPCIAddressBus was an array of QEMU_PCI_ADDRESS_SLOT_LAST
uint8_t's, which worked fine as long as every PCI bus was
identical. In the future, some PCI busses will allow connecting PCI
devices, and some will allow PCIe devices; also some will only allow
connection of a single device, while others will allow connecting 31
devices.
In order to keep track of that information for each bus, we need to
turn qemuDomainPCIAddressBus into a struct, for now with just one
member:
uint8_t slots[QEMU_PCI_ADDRESS_SLOT_LAST];
Additional members will come in later patches.
The item in qemuDomainPCIAddresSet that contains the array of
qemuDomainPCIAddressBus is now called "buses" to be more consistent
with the already existing "nbuses" (and with the new "slots" array).
Currently the QEMU driver creates the VM's cgroup prior to
forking, and then uses a virCommand hook to move the child
into the cgroup. This won't work with systemd whose APIs
do the creation of cgroups + attachment of processes atomically.
Fortunately we have a handshake taking place between the
QEMU driver and the child process prior to QEMU being exec()d,
which was introduced to allow setup of disk locking. By good
fortune this synchronization point can be used to enable the
QEMU driver to do atomic setup of cgroups removing the use
of the hook script.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Use the new virCgroupNewDetect function to determine cgroup
placement of existing running VMs. This will allow the legacy
cgroups creation APIs to be removed entirely
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
During qemuTranslateDiskSourcePool() execution, if the srcpool has been
defined with authentication information, then for iSCSI pools copy the
authentication and host information to virDomainDiskDef.
Due to a goto statement missed when refactoring in 2771f8b74c
when acquiring of a domain job failed the error path was not taken. This
resulted into a crash afterwards as an extra reference was removed from a
domain object leading to it being freed. An attempt to list the domains
leaded to a crash of the daemon afterwards.
https://bugzilla.redhat.com/show_bug.cgi?id=928672
The translation must be done before both of cgroup and security
setting, otherwise since the disk source is not translated yet,
it might be skipped on cgroup and security setting.
The difference with already supported pool types (dir, fs, block)
is: there are two modes for iscsi pool (or network pools in future),
one can specify it either to use the volume target path (the path
showed up on host) with mode='host', or to use the remote URI qemu
supports (e.g. file=iscsi://example.org:6000/iqn.1992-01.com.example/1)
with mode='direct'.
For 'host' mode, it copies the volume target path into disk->src. For
'direct' mode, the corresponding info in the *one* pool source host def
is copied to disk->hosts[0].
Convert the remaining methods in vircgroup.c to report errors
instead of returning errno values.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The alias for hostdevs of type SCSI can be too long for QEMU if
larger LUNs are encountered. Here's a real life example:
<hostdev mode='subsystem' type='scsi' managed='no'>
<source>
<adapter name='scsi_host0'/>
<address bus='0' target='19' unit='1088634913'/>
</source>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</hostdev>
this results in a too long drive id, resulting in QEMU yelling
Property 'scsi-generic.drive' can't find value 'drive-hostdev-scsi_host0-0-19-1088634913'
This commit changes the alias back to the default hostdev$(index)
scheme.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
In case libvirtd is asked to unplug a device but the device is actually
unplugged later when libvirtd is not running, we need to detect that and
remove such device when libvirtd starts again and reconnects to running
domains.
A future patch wants the DAC security manager to be able to safely
get the supplemental group list for a given uid, but at the time
of a fork rather than during initialization so as to pick up on
live changes to the system's group database. This patch adds the
framework, including the possibility of a pre-fork callback
failing.
For now, any driver that implements a prefork callback must be
robust against the possibility of being part of a security stack
where a later element in the chain fails prefork. This means
that drivers cannot do any action that requires a call to postfork
for proper cleanup (no grabbing a mutex, for example). If this
is too prohibitive in the future, we would have to switch to a
transactioning sequence, where each driver has (up to) 3 callbacks:
PreForkPrepare, PreForkCommit, and PreForkAbort, to either clean
up or commit changes made during prepare.
* src/security/security_driver.h (virSecurityDriverPreFork): New
callback.
* src/security/security_manager.h (virSecurityManagerPreFork):
Change signature.
* src/security/security_manager.c (virSecurityManagerPreFork):
Optionally call into driver, and allow returning failure.
* src/security/security_stack.c (virSecurityDriverStack):
Wrap the handler for the stack driver.
* src/qemu/qemu_process.c (qemuProcessStart): Adjust caller.
Signed-off-by: Eric Blake <eblake@redhat.com>
When user does not specify any model for scsi controller, or worse, no
controller at all, but libvirt automatically adds scsi controller with
no model, we are not searching for virtio-scsi and thus this can fail
for example on qemu which doesn't support lsi logic adapter.
This means that when qemu on x86 doesn't support lsi53c895a and the
user adds the following to an XML without any scsi controller:
<disk ...>
...
<target dev='sda'>
</disk>
libvirt fails like this:
# virsh define asdf.xml
error: Failed to define domain from asdf.xml
error: internal error Unable to determine model for scsi controller
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=974943
When virAsprintf was changed from a function to a macro
reporting OOM error in dc6f2da, it was documented as returning
0 on success. This is incorrect, it returns the number of bytes
written as asprintf does.
Some of the functions were converted to use virAsprintf's return
value directly, changing the return value on success from 0 to >= 0.
For most of these, this is not a problem, but the change in
virPCIDriverDir breaks PCI passthrough.
The return value check in virhashtest pre-dates virAsprintf OOM
conversion.
vmwareMakePath seems to be unused.
Merge the virCommandPreserveFD / virCommandTransferFD methods
into a single virCommandPasFD method, and use a new
VIR_COMMAND_PASS_FD_CLOSE_PARENT to indicate their difference
in behaviour
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduced in commit 24b08219; compilation on RHEL 6.4 complained:
qemu/qemu_hotplug.c: In function 'qemuDomainAttachChrDevice':
qemu/qemu_hotplug.c:1257: error: declaration of 'remove' shadows a global declaration [-Wshadow]
/usr/include/stdio.h:177: error: shadowed declaration is here [-Wshadow]
* src/qemu/qemu_hotplug.c (qemuDomainAttachChrDevice): Avoid the
name 'remove'.
Signed-off-by: Eric Blake <eblake@redhat.com>
A part of the returned monitor response was freed twice and caused
crashes of the daemon when using guest agent cpu count retrieval.
# virsh vcpucount dom --guest
Introduced in v1.0.6-48-gc6afcb0
Implement the new API that will handle setting the balloon driver statistics
collection period in order to enable or disable the collection dynamically.
This patch will add the qemuMonitorJSONGetMemoryStats() to execute a
"guest-stats" on the balloonpath using "get-qom" replacing the former
mechanism which looked through the "query-ballon" returned data for
the fields. The "query-balloon" code only returns 'actual' memory.
Rather than duplicating the existing code, have the JSON API use the
GetBalloonInfo API.
A check in the qemuMonitorGetMemoryStats() will be made to ensure the
balloon driver path has been set. Since the underlying JSON code can
return data not associated with the balloon driver, we don't fail on
a failure to get the balloonpath. Of course since we've made the check,
we can then set the ballooninit flag. Getting the path here is primarily
due to the process reconnect path which doesn't attempt to set the
collection period.
At vm startup and attach attempt to set the balloon driver statistics
collection period based on the value found in the domain xml file. This
is not done at reconnect since it's possible that a collection period
was set on the live guest and making the set period call would reset to
whatever value is stored in the config file.
Setting the stats collection period has a side effect of searching through
the qom-list output for the virtio balloon driver and making sure that it
has the right properties in order to allow setting of a collection period
and eventually fetching of statistics.
The walk through the qom-list is expensive and thus the balloonpath will
be saved in the monitor private structure as well as a flag indicating
that the initialization has already been attempted (in the event that a
path is not found, no sense to keep checking).
This processing model conforms to the qom object model model which
requires setting object properties after device startup. That is, it's
not possible to pass the period along via the startup code as it won't
be recognized.
If users haven't configured guest agent then qemuAgentCommand() will
dereference a NULL 'mon' pointer, which causes crash of libvirtd when
using agent based cpu (un)plug.
With the patch, when the qemu-ga service isn't running in the guest,
a expected error "error: Guest agent is not responding: Guest agent
not available for now" will be raised, and the error "error: argument
unsupported: QEMU guest agent is not configured" is raised when the
guest hasn't configured guest agent.
GDB backtrace:
(gdb) bt
#0 virNetServerFatalSignal (sig=11, siginfo=<value optimized out>, context=<value optimized out>) at rpc/virnetserver.c:326
#1 <signal handler called>
#2 qemuAgentCommand (mon=0x0, cmd=0x7f39300017b0, reply=0x7f394b090910, seconds=-2) at qemu/qemu_agent.c:975
#3 0x00007f39429507f6 in qemuAgentGetVCPUs (mon=0x0, info=0x7f394b0909b8) at qemu/qemu_agent.c:1475
#4 0x00007f39429d9857 in qemuDomainGetVcpusFlags (dom=<value optimized out>, flags=9) at qemu/qemu_driver.c:4849
#5 0x00007f3957dffd8d in virDomainGetVcpusFlags (domain=0x7f39300009c0, flags=8) at libvirt.c:9843
How to reproduce?
# To start a guest without guest agent configuration
# then run the following cmdline
# virsh vcpucount foobar --guest
error: End of file while reading data: Input/output error
error: One or more references were leaked after disconnect from the hypervisor
error: Failed to reconnect to the hypervisor
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=984821
Signed-off-by: Alex Jia <ajia@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
There are two levels on which a device may be hotplugged: config
and live. The config level requires just an insert or remove from
internal domain definition structure, which is exactly what this
patch does. There is currently no implementation for a chardev
update action, as there's not much to be updated. But more
importantly, the only thing that can be updated is path or socket
address by which chardevs are distinguished. So the update action
is currently not supported.
Add a new qemuMonitorJSONSetObjectProperty() method to support invocation
of the 'qom-set' JSON monitor command with a provided path, property, and
expected data type to set.
NOTE: The set API was added only for the purpose of the qemumonitorjsontest
The test code uses the same "/machine/i440fx" property as the get test and
attempts to set the "realized" property to "true" (which it should be set
at anyway).
Add a new qemuMonitorJSONGetObjectProperty() method to support invocation
of the 'qom-get' JSON monitor command with a provided path, property, and
expected data type return. The qemuMonitorJSONObjectProperty is similar to
virTypedParameter; however, a future patch will extend it a bit to include
a void pointer to balloon driver statistic data.
NOTE: The ObjectProperty structures and API are added only for the
purpose of the qemumonitorjsontest
The provided test will execute a qom-get on "/machine/i440fx" which will
return a property "realized".
Add a new qemuMonitorJSONGetObjectListPaths() method to support invocation
of the 'qom-list' JSON monitor command with a provided path.
NOTE: The ListPath structures and API's are added only for the
purpose of the qemumonitorjsontest
The returned list of paired data fields of "name" and "type" that can
be used to peruse QOM configuration data and eventually utilize for the
balloon statistics.
The test does a "{"execute":"qom-list", "arguments": { "path": "/"}}" which
returns "{"return": [{"name": "machine", "type": "child<container>"},
{"name": "type", "type": "string"}]}" resulting in a return of an array
of 2 elements with [0].name="machine", [0].type="child<container>". The [1]
entry appears to be a header that could be used some day via a command such
as "virsh qemuobject --list" to format output.
If an error occurs during qemuDomainAttachNetDevice after the macvtap
was created in qemuPhysIfaceConnect, the macvtap device gets left behind.
This patch adds code to the cleanup routine to delete the macvtap.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Reviewed-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
I recently patches the callers to virPCIDeviceReset() to not call it
if the current driver for a device was vfio-pci (since that driver
will always reset the device itself when appropriate. At the time, Dan
Berrange suggested that I could instead modify virPCIDeviceReset
to check the currently bound driver for the device, and decide
for itself whether or not to go ahead with the reset.
This patch removes the previously added checks, and replaces them with
a check down in virPCIDeviceReset(), as suggested.
The functional difference here is that previously we were deciding
based on either the hostdev configuration or the value of
stubDriverName in the virPCIDevice object, but now we are actually
comparing to the "driver" link in the device's sysfs entry
directly. In practice, both should be the same.
The function being introduced is responsible for creating command
line argument for '-device' for given character device. Based on
the chardev type, it calls appropriate qemuBuild.*ChrDeviceStr(),
e.g. qemuBuildSerialChrDeviceStr() for serial chardev and so on.
The chardev alias assignment is going to be needed in a separate
places, so it should be moved into a separate function rather
than copying code randomly around.
The function being introduced is responsible for preparing and
executing 'chardev-add' qemu monitor command. Moreover, in case
of PTY chardev, the corresponding pty path is updated.
Currently, we are building InetSocketAddress qemu json type
within the qemuMonitorJSONNBDServerStart function. However, other
future functions may profit from the code as well. So it should
be moved into a static function.
Recent changes uncovered a possibility that 'last_processed_hostdev_vf'
was set to -1 in 'qemuPrepareHostdevPCIDevices' and would cause problems
in for loop end condition in the 'resetvfnetconfig' label if the
variable was never set to 'i' due to 'qemuDomainHostdevNetConfigReplace'
failure.
With current code, error reporting for unsupported devices for hot plug,
unplug and update is total mess. The VIR_ERR_CONFIG_UNSUPPORTED error
code is reported instead of VIR_ERR_OPERATION_UNSUPPORTED. Moreover, the
error messages are not helping to find the root cause (lack of
implementation).
For low-memory domains (roughly under 400MB) our automatic memory limit
computation comes up with a limit that's too low. This is because the
0.5 multiplication does not add enough for such small values. Let's
increase the constant part of the computation to fix this.
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Whenever virPortAllocatorRelease is called with port == 0, it complains
that the port is not in an allowed range, which is expectable as the
port was never allocated. Let's make virPortAllocatorRelease ignore 0
ports in a similar way free() ignores NULL pointers.
https://bugzilla.redhat.com/show_bug.cgi?id=981139
If a domain is paused before migration starts, we need to tell that to
the destination libvirtd to prevent it from resuming the domain at the
end of migration. This regression was introduced by commit 5379bb0.
Since commit 23e8b5d8, the code is refactored in a way that supports
domains with multiple graphics elements and commit 37b415200 allows
starting such domains. However none of those commits take migration
into account. Even though qemu doesn't support relocation for
anything else than SPICE and for no more than one graphics, there is no
reason to hardcode one graphics into this part of the code as well.
Add monitor callback API domainGuestPanic, that implements
'destroy', 'restart' and 'preserve' events of the 'on_crash'
in the XML when domain crashed.
After abf75aea24 the compiler screams:
qemu/qemu_driver.c: In function 'qemuNodeDeviceDetachFlags':
qemu/qemu_driver.c:10693:9: error: 'domain' may be used uninitialized in this function [-Werror=maybe-uninitialized]
pci = virPCIDeviceNew(domain, bus, slot, function);
^
qemu/qemu_driver.c:10693:9: error: 'bus' may be used uninitialized in this function [-Werror=maybe-uninitialized]
qemu/qemu_driver.c:10693:9: error: 'slot' may be used uninitialized in this function [-Werror=maybe-uninitialized]
qemu/qemu_driver.c:10693:9: error: 'function' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Since the other functions qemuNodeDeviceReAttach and qemuNodeDeviceReset
looks exactly the same, I've initialized the variables there as well.
However, I am still wondering why those functions don't matter to gcc
while the first one does.
Implement check whether (maximum) vCPUs doesn't exceed machine
type's cpu-max settings.
On older versions of QEMU the check is disabled.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
A loop in qemuPrepareHostdevPCIDevices() intended to cycle through all
the objects on the list pcidevs was doing "while (listcount > 0)", but
nothing in the body of the loop was reducing the size of the list - it
was instead removing items from a *different* list. It has now been
safely changed to a for() loop.
(This isn't as bad as it sounds - it's only a problem in case of an
OOM error.)
qemuGetActivePciHostDeviceList() had been creating a list that
contained pointers to objects that were also on the activePciHostdevs
list. In case of an OOM error, this newly created list would be
virObjectUnref'ed, which would cause everything on the list to be
freed. But all of those objects would still be on the
activePciHostdevs list, which could have very bad consequences if that
list was ever again accessed.
The solution used here is to populate the new list with *copies* of
the objects from the original list. It turns out that on return from
qemuGetActivePciHostDeviceList(), the caller would almost immediately
go through all the device objects and "steal" them (i.e. remove the
pointer from the list but not delete it) all from either one list or
the other; we now instead just *delete* (remove from the list and
free) each device from one list or the other, so in the end we have
the same state.
I realized after the fact that it's probably better in the long run to
give this function a name that matches the name of the link used in
sysfs to hold the group (iommu_group).
I'm changing it now because I'm about to add several more functions
that deal with iommu groups.
The driver arg to virPCIDeviceDetach is no longer used (the name of the stub driver is now set in the virPCIDevice object, and virPCIDeviceDetach retrieves it from there). Remove it.
I just learned that VFIO resets PCI devices when they are assigned to
guests / returned to the host, so it is redundant for libvirt to reset
the devices. This patch inhibits calling virPCIDeviceReset to devices
that will be/were assigned using VFIO.
virPCIDeviceDetach would previously sometimes consume the input device
object (to put it on the inactive list) and sometimes not. Avoiding
memory leaks required checking beforehand to see if the device was
already on the list, and freeing the device object in the caller only
if there wasn't already an identical object on the inactive list.
This patch makes it consistent - virPCIDeviceDetach will *never*
consume the input virPCIDevice object; if it needs to put one on the
inactive list, it will create a copy and put *that* on the list. This
way the caller knows that it is always their responsibility to free
the device object they created.
Previously stubDriver was always set from a string literal, so it was
okay to use a const char * that wasn't freed when the virPCIDevice was
freed. This will not be the case in the near future, so it is now a
char* that is allocated in virPCIDeviceSetStubDriver() and freed
during virPCIDeviceFree().
Add new CPU features for HyperV:
vapic for virtual APIC support
spinlocks for setting spinlock support
<features>
<hyperv>
<vapic state='on'/>
<spinlocks state='on' retries='4096'/>
</hyperv>
</features>
https://bugzilla.redhat.com/show_bug.cgi?id=784836
Commit 752596b5 broke the build with -Werror
qemu/qemu_hotplug.c: In function 'qemuDomainChangeGraphics':
qemu/qemu_hotplug.c:1980:39: error: declaration of 'listen' shadows a
global declaration [-Werror=shadow]
Fix with s/listen/newlisten/
Currently, we have a bug when updating a graphics device. A graphics device can
have a listen address set. This address is either defined by user (in which case
it's type is VIR_DOMAIN_GRAPHICS_LISTEN_TYPE_ADDRESS) or it can be inherited
from a network (in which case it's type is
VIR_DOMAIN_GRAPHICS_LISTEN_TYPE_NETWORK). However, in both cases we have a
listen address to process (e.g. during migration, as I've tried to fix in
7f15ebc7).
Later, when a user tries to update the graphics device (e.g. set a password),
we check if listen addresses match the original as qemu doesn't know how to
change listen address yet. Hence, users are required to not change the listen
address. The implementation then just dumps listen addresses and compare them.
Previously, while dumping the listen addresses, NULL was returned for NETWORK.
After my patch, this is no longer true, and we get a listen address for olddev
even if it is a type of NETWORK. So we have a real string on one side, the NULL
from user's XML on the other side and hence we think user wants to change the
listen address and we refuse it.
Therefore, we must take the type of listen address into account as well.
As a consequence of the cgroup layout changes from commit '632f78ca', the
qemuDomainGetSchedulerParameters[Flags]()' and qemuGetSchedulerType() APIs
failed to return data for a non running domain. This can be seen through
a 'virsh schedinfo <domain>' command which returns:
Scheduler : Unknown
error: Requested operation is not valid: cgroup CPU controller is not mounted
Prior to that change a non running domain would return:
Scheduler : posix
cpu_shares : 0
vcpu_period : 0
vcpu_quota : 0
emulator_period: 0
emulator_quota : 0
This patch will restore the capability to return configuration only data
for a non running domain regardless of whether cgroups are available.
This flag is meant for errors happening on the source of the migration
and isn't used on the destination. To allow better migration
compatibility, don't propagate it to the destination.
Paolo Bonzini pointed out that it's actually possible to migrate a qemu
instance that was paused due to I/O error and it will be able to work on
the destination if the storage is accessible.
This patch introduces flag VIR_MIGRATE_ABORT_ON_ERROR that cancels the
migration in case an I/O error happens while it's being performed and
allows migration without this flag. This flag can be possibly used for
other error reasons that may be introduced in the future.
Currently, we wait for SPICE to migrate in the very same loop where we
wait for qemu to migrate. This has a disadvantage of slowing seamless
migration down. One one hand, we should not kill the domain until all
SPICE data has been migrated. On the other hand, there is no need to
wait in the very same loop and hence slowing down 'cont' on the
destination. For instance, if users are watching a movie, they can
experience the movie to be stopped for a couple of seconds, as
processors are not running nor on src nor on dst as libvirt waits for
SPICE to migrate. We should move the waiting phase to migration CONFIRM
phase.
When qemu >= 1.20, it is safe to use -device for primary video
device as described in 4c993d8ab.
So, we are missing the cap flag in QMP capabilities detection, this
flag can be initialized safely in virQEMUCapsInitQMPBasic.
Convert input XML to migratable before using it in
qemuDomainSaveImageOpen.
XML in the save image is migratable, i.e. doesn't contain implicit
controllers. If these controllers were in a non-default order in the
input XML, the ABI check would fail. Removing and re-adding these
controllers fixes it.
https://bugzilla.redhat.com/show_bug.cgi?id=834196
During a live migration the guest may receive a disk access I/O error.
In this state the guest is unable to continue running on a remote host
after migration as some state may be present in the kernel and not
migrated.
With this patch, the migration is canceled in such case so it can either
continue on the source if the I/O issues are recovered or has to be
destroyed anyways.
https://bugzilla.redhat.com/show_bug.cgi?id=971485
As of d7f9d82753 we copy the listen
address from the qemu.conf config file in case none has been provided
via XML. But later, when migrating, we should not include such listen
address in the migratable XML as it is something autogenerated, not
requested by user. Moreover, the binding to the listen address will
likely fail, unless the address is '0.0.0.0' or its IPv6 equivalent.
This patch introduces a new boolean attribute to virDomainGraphicsListenDef
to distinguish autofilled listen addresses. However, we must keep the
attribute over libvirtd restarts, so it must be kept within status XML.
This patch fixes changes done in commit 29c1e913e4
that was pushed without implementing review feedback.
The flag introduced by the patch is changed to VIR_DOMAIN_VCPU_GUEST and
documentation makes the difference between regular hotplug and this new
functionality more explicit.
The virsh options that enable the use of the new flag are changed to
"--guest" and the documentation is fixed too.
Currently, there's a path to use the ncpuinfo variable uninitialized,
which leads to a compiler warning:
qemu/qemu_driver.c: In function 'qemuDomainGetVcpusFlags':
qemu/qemu_driver.c:4573:9: error: 'ncpuinfo' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
for (i = 0; i < ncpuinfo; i++) {
^
This patch implements support for the "cpu-add" QMP command that plugs
CPUs into a live guest. The "cpu-add" command was introduced in QEMU
1.5. For the hotplug to work machine type "pc-i440fx-1.5" is required.
The qemu guest agent allows to online and offline CPUs from the
perspective of the guest. This patch adds helpers that call
'guest-get-vcpus' and 'guest-set-vcpus' guest agent functions and
convert the data for internal libvirt usage.
https://bugzilla.redhat.com/show_bug.cgi?id=964177
Though both libvirt and QEMU's document say RTC_CHANGE returns
the offset from the host UTC, qemu actually returns the offset
from the specified date instead when specific date is provided
(-rtc base=$date).
It's not safe for qemu to fix it in code, it worked like that
for 3 years, changing it now may break other QEMU use cases.
What qemu tries to do is to fix the document:
http://lists.gnu.org/archive/html/qemu-devel/2013-05/msg04782.html
And in libvirt side, instead of replying on the value from qemu,
this converts the offset returned from qemu to the offset from
host UTC, by:
/*
* a: the offset from qemu RTC_CHANGE event
* b: The specified date (-rtc base=$date)
* c: the host date when libvirt gets the RTC_CHANGE event
* offset: What libvirt will report
*/
offset = a + (b - c);
The specified date (-rtc base=$date) is recorded in clock's def as
an internal only member (may be useful to exposed outside?).
Internal only XML tag "basetime" is introduced to not lose the
guest's basetime after libvirt restarting/reloading:
<clock offset='variable' adjustment='304' basis='utc' basetime='1370423588'/>
