qemu supports this enlightenment since version 7.10.
From the qemu commit:
Hyper-V specification allows to pass parameters for certain hypercalls
using XMM registers ("XMM Fast Hypercall Input"). When the feature is
in use, it allows for faster hypercalls processing as KVM can avoid
reading guest's memory.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
qemu supports this enlightenment since version 7.10.
From the qemu commit:
The newly introduced enlightenment allow L0 (KVM) and L1 (Hyper-V)
hypervisors to collaborate to avoid unnecessary updates to L2
MSR-Bitmap upon vmexits.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Currently, qemuProcessStop() unlocks given domain object right in
the middle of cleanup process. This is dangerous because there
might be another thread which is executing virDomainObjListAdd().
And since the domain object is on the list of domain objects AND
by the time qemuProcessStop() unlocks it the object is also
marked as inactive, the other thread acquires the lock and
switches vm->def pointer.
The unlocking of domain object is needed though, to allow even
processing thread finish its queue. Well, the processing can be
done before any cleanup is attempted.
Therefore, use freshly introduced virEventThreadStop() to join
the event thread and drop lock/unlock from the middle of
qemuProcessStop().
Now, there's a comment being removed that mentions
qemuDomainObjStopWorker() and why it has to be called only after
the domain is marked as dead. This comment is no longed
applicable because call to qemuDomainObjStopWorker() is removed
also. Moreover, priv->beingDestroyed is set to true before
unlocking the domain object, thus any event processing callback
is going to see the domain being destroyed and can chose to
either exit early or finish processing event.
Fixes: 3865410e7f
Resolves: https://issues.redhat.com/browse/RHEL-49607
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The aim is to move parts of vir_event_thread_finalize() that MAY
block into a separate function, so that unrefing the a
virEventThread no longer blocks (or require releasing and
subsequent re-acquiring of a mutex).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduce tests to verify that the 'ps2' feature is correctly parsed
when given either 'dirty' XML from a user or 'clean' canonical XML,
as produced by libvirt. This also tests the transformation from libvirt's
internal state to the aforementioned canonical form and to a QEMU
command line.
As a bonus, we also test some known bad configurations:
- When user explicitly adds ps2 bus inputs, but also explicitly disables
the 'ps2' feature.
- When user explicitly enables the 'vmport' feature, but also explicitly
disables the 'ps2' feature. This is not supported by QEMU and will
result in vmport device not being created without emitting any warning
or error.
Signed-off-by: Kamil Szczęk <kamil@szczek.dev>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This introduces a new 'ps2' feature which, when disabled, results in
no implicit PS/2 bus input devices being automatically added to the
domain and addition of the 'i8042=off' machine option to the QEMU
command-line.
A notable side effect of disabling the i8042 controller in QEMU is that
the vmport device won't be created. For this reason we will not allow
setting the vmport feature if the ps2 feature is explicitly disabled.
Signed-off-by: Kamil Szczęk <kamil@szczek.dev>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This capability tells us whether given QEMU binary supports the
'-machine xxx,i8042=on/off' toggle used to enable/disable PS/2
controller emulation.
A few facts:
- This option was introduced in QEMU 7.0 and defaults to 'on'
- QEMU versions before 7.0 enabled i8042 controller emulation implicitly
- This option (and i8042 controller emulation itself) is only supported
by descendants of the generic PC machine type (e.g. i440fx, q35, etc.)
Signed-off-by: Kamil Szczęk <kamil@szczek.dev>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Up until now, we've assumed that all x86 machines have a PS/2
controller built-in. This assumption was correct until QEMU v4.2
introduced a new x86-based machine type - microvm.
Due to this assumption, a pair of unnecessary PS/2 inputs are implicitly
added to all microvm domains. This patch fixes that by whitelisting
machine types which are known to include the i8042 PS/2 controller.
Signed-off-by: Kamil Szczęk <kamil@szczek.dev>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Attempting to start qemu with or hotplug an empty 'usb-storage' based
disk results in the following error:
qemu-system-x86_64: -device {"driver":"usb-storage","bus":"usb.0","port":"2","id":"usb-disk1","removable":true}: drive property not set
Reject such config at validation step and adjust tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Some code paths, such as if hotplug of an empty cdrom fails can cause
that 'qemuBlockStorageSourceChainDetach' will be called with 'NULL'
@data as there is no backend for the disk.
The above case became possible once we allowed hotplug of cdroms and
subsequently fixed the case when users would hotplug an empty cdrom
which ultimately caused the possibility of having no backend in the
hotplug code path which was not possible before (see 'Fixes:' below and
also the commit linked from there).
Make 'qemuBlockStorageSourceChainDetach' tolerate NULL @data by simply
returning early.
Fixes: 894c6c5c16
Resolves: https://issues.redhat.com/browse/RHEL-54550
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In its commit v9.0.0-rc0~1^2 QEMU started to read
/proc/sys/vm/max_map_count file to set up coroutine limits better
(something about VMAs, mmap(), see the commit for more info).
Allow the file in apparmor profile.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/660
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since we use 'tc' to set QoS, or we instruct OVS which then uses
'tc', we have to make sure values are within range acceptable to
'tc'.
Resolves: https://issues.redhat.com/browse/RHEL-45200
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This function validates whether parsed limits are within range as
defined by 'tc' sources (since we use tc to set QoS; or OVS which
then uses tc too). The 'tc' program stores speeds in 64bit
integers (unit is bytes per second) and sizes in uints (unit is
bytes). We use different units: kilobytes per second and
kibibytes and therefore we can parse values larger than 'tc' can
handle and thus need a function to check if values still fit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Instead of having many if-else statements, each with its own
vshTableRowAppend() call, we can use a simple trick - have an
array of string pointers, set array members in the if bodies and
then call vshTableRowAppend() once.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All calls to vshTableRowAppend() inside of cmdList() share couple
of same arguments: domain ID, domain name and domain state. While
the first one is stored in a variable and then passed to all
vshTableRowAppend() calls, the others are passed as a function
call. Switch the latter to variables too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There is a family of convenient macros: NULLSTR, NULLSTR_EMPTY,
NULLSTR_STAR, NULLSTR_MINUS which hides ternary operator.
Generated using the following spatch (and its obvious variants):
@@
expression s;
@@
<+...
- s ? s : "<null>"
+ NULLSTR(s)
...+>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Check for the last multipart message right as the first thing. The
presumption probably was that the last message might still contain a
payload we want to parse. However that cannot be true since that would
have to be a type RTM_NEWNEIGH. This was not caught because older
kernels were note sending NLMSG_DONE and probably relied on the fact
that the parsing just stops after all the messages are walked through,
which the NLMSG_OK macro successfully did.
Resolves: https://issues.redhat.com/browse/RHEL-52449
Resolves: https://bugzilla.redhat.com/2302245
Fixes: a176d67cdf
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The previous check was all wrong since it calculated the how long would
the netlink message be if the netlink header was the payload and then
subtracted that from the whole message length, a variable that was not
used later in the code. This check can fail if there are no additional
payloads, struct rtattr in particular, which we are parsing later,
however the RTA_OK macro would've caught that anyway.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Use convenience macro which does almost the same thing we were doing,
but also pads out the payload length to a multiple of NLMSG_ALIGNTO (4)
bytes.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
This will allow to print full domains info:
Id Name State UUID
---------------------------
Signed-off-by: Nikolai Barybin <nikolai.barybin@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It was released on June 12, 2024.
The update means we no longer have to care about json-c 0.13
present in Leap 15.5, which solves some whitespace issues in
tests.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Some JSON parsers do not like bare types outside of objects or arrays
or do validation of object key uniqueness.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Based on discussion after commit f432114d9c was pushed it was pointed
out that the documentation still mentions the older version.
Fix the documentation to state the new version and introduce ambiguity
for future updates.
Fixes: f432114d9c
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This brings the tool's list of features in sync with qemu
commit 37fbfda8f4145ba1700f63f0cb7be4c108d545de.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This adds an option to use libcpuinfo [1] as data source for
libvirt's list of x86 cpu features. This is purely optional and
does not change the script's behavior if libcpuinfo is not
installed.
libcpuinfo is a cross-vendor, cross-architecture source for CPU
related information that has the capability to replace libvirt's
dependence on qemu's cpu feature list.
[1] https://gitlab.com/twiederh/libcpuinfo
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
On failure to plug the device the cleanup path didn't roll back the FD
passing to qemu thus qemu would hold the FDs indefinitely.
Resolves: https://issues.redhat.com/browse/RHEL-53964
Fixes: b79abf9c3c (vdpafd)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As of libssh commit of libssh-0.11.0~70 [1] the
ssh_channel_get_exit_status() function is deprecated and a new
one is introduced instead: ssh_channel_get_exit_state().
It's not a drop-in replacement, but it's simple enough.
Adapt our libssh handling code to this change.
1: https://git.libssh.org/projects/libssh.git/commit/?id=04d86aeeae73c78af8b3dcdabb2e588cd31a8923
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This mostly reverts commit 65491a2dfe.
There was a bug introduced in glib 2.67.0 which impacted libvirt with
clang causing -Wincompatible-pointer-types-discards-qualifiers warnings.
This was actually fixed quite quickly in 2.67.1 with
https://gitlab.gnome.org/GNOME/glib/-/merge_requests/1719
Our workaround was then broken with glib 2.81.1 due to commit
14b3d5da9019150d821f6178a075d85044b4c255 changing the signature of the
(private) macro we were overriding.
Since odd-number glib releases are development snapshots, and the
original problem was only present in 2.67.0 and no other releases,
just drop the workaround entirely.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add test cases for few edge cases which excercise the XML reporting from
libxml2 in anticipation of upcoming changes of behaviour.
'virschematest' must skip parsing of the broken file altogether so this
patch adds infrastructure to allow that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Upcoming patch will result in having the build directory path in some of
the output files. Replace it by a constant 'ABS_SRCDIR' to avoild
breaking tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Backport the implementation of 'g_string_replace' until we require at
least glib-2.68
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Invoke virCHProcessStop to kill CH process incase of any failures during
restore operation.
Signed-off-by: Purna Pavan Chandra <paekkaladevi@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Cloud-hypervisor now supports restoring with new net fds.
Ref: https://github.com/cloud-hypervisor/cloud-hypervisor/pull/6402
So, pass new tap fds via SCM_RIGHTS to CH's restore api.
Signed-off-by: Purna Pavan Chandra <paekkaladevi@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove the unwanted utility function and make api calls directly from
virCHMonitorSaveVM fn
Signed-off-by: Purna Pavan Chandra <paekkaladevi@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
