Ensure devices that are specified to be on a PCI segment that is behind
the IOMMU are IOMMU enabled if possible or error out for those devices
that do not support it.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Previously it was not possible to enable vIOMMU for a virtio device.
However with the ability to place an entire PCI segment behind the
IOMMU the IOMMU mapping needs to be setup for the virtio device if it is
behind the IOMMU.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This can already be calculated by the summing the tables reported by the
Linux kernel but this is more convenient.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Separate the destruction and cleanup of original VM and the creation of
the new one. In particular have a clear hand off point for resources
(e.g. reset EventFd) used by the new VM from the original. In the
situation where vm.shutdown() generates an error this also avoids the
Vmm reference to the Vm (self.vm) from being maintained.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the newly added Vdpa device along with the new vdpa parameter,
this patch enables the support for vDPA devices.
It's important to note this the only virtio device for which we provide
an ExternalDmaMapping instance. This will allow for the right DMA ranges
to be mapped/unmapped.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Introduce a new --vdpa parameter associated with a VdpaConfig for the
future creation of a Vdpa device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This will significantly reduce the size of the DSDT and the effort
required to parse them if there is no requirement to support
hotplug/unplug.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
If the CpuManager is dynamic it devices CPUs can be
hotplugged/unplugged.
Since TDX does not support CPU hotplug this is currently the only
determinator as to whether the CpuManager is dynamic.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
vmm.ping/vm.info will hang for PUT method, vm.create/vmm.shutdonw hang for GET method.
Because these four APIs do not write the response body when the HTTP method does not match.
Signed-off-by: LiHui <andrewli@kubesphere.io>
In case the virtio device which requires DMA mapping is placed behind a
virtual IOMMU, we shouldn't map/unmap any region manually. Instead, we
provide the DMA handler to the virtio-iommu device so that it can
trigger the proper mappings.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
If a virtio device is associated with a DMA handler, the DMA mapping and
unmapping is performed from the device manager through the handler.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Given that some virtio device might need some DMA handling, we provide a
way to store this through the VirtioPciDevice layer, so that it can be
accessed when the PCI device is removed.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In anticipation for handling potential DMA mapping/unmapping operations for a
virtio device, we extend the MetaVirtioDevice with an additional field
that holds an optional DMA handler.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The tuple of information related to each virtio device is too big, and
it's better to factorize it through a dedicated structure.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When mask a msi irq, we set the entry.masked to be true, so kvm
hypervisor will not pass the gsi to kernel through KVM_SET_GSI_ROUTING
ioctl which update kvm->irq_routing. This will trigger kernel
panic on AMD platform when the gsi is the largest one in kernel
kvm->irqfds.items:
crash> bt
PID: 22218 TASK: ffff951a6ad74980 CPU: 73 COMMAND: "vcpu8"
#0 [ffffb1ba6707fa40] machine_kexec at ffffffff8565b397
#1 [ffffb1ba6707fa90] __crash_kexec at ffffffff85788a6d
#2 [ffffb1ba6707fb58] crash_kexec at ffffffff8578995d
#3 [ffffb1ba6707fb70] oops_end at ffffffff85623c0d
#4 [ffffb1ba6707fb90] no_context at ffffffff856692c9
#5 [ffffb1ba6707fbf8] exc_page_fault at ffffffff85f95b51
#6 [ffffb1ba6707fc50] asm_exc_page_fault at ffffffff86000ace
[exception RIP: svm_update_pi_irte+227]
RIP: ffffffffc0761b53 RSP: ffffb1ba6707fd08 RFLAGS: 00010086
RAX: ffffb1ba6707fd78 RBX: ffffb1ba66d91000 RCX: 0000000000000001
RDX: 00003c803f63f1c0 RSI: 000000000000019a RDI: ffffb1ba66db2ab8
RBP: 000000000000019a R8: 0000000000000040 R9: ffff94ca41b82200
R10: ffffffffffffffcf R11: 0000000000000001 R12: 0000000000000001
R13: 0000000000000001 R14: ffffffffffffffcf R15: 000000000000005f
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffffb1ba6707fdb8] kvm_irq_routing_update at ffffffffc09f19a1 [kvm]
#8 [ffffb1ba6707fde0] kvm_set_irq_routing at ffffffffc09f2133 [kvm]
#9 [ffffb1ba6707fe18] kvm_vm_ioctl at ffffffffc09ef544 [kvm]
RIP: 00007f143c36488b RSP: 00007f143a4e04b8 RFLAGS: 00000246
RAX: ffffffffffffffda RBX: 00007f05780041d0 RCX: 00007f143c36488b
RDX: 00007f05780041d0 RSI: 000000004008ae6a RDI: 0000000000000020
RBP: 00000000000004e8 R8: 0000000000000008 R9: 00007f05780041e0
R10: 00007f0578004560 R11: 0000000000000246 R12: 00000000000004e0
R13: 000000000000001a R14: 00007f1424001c60 R15: 00007f0578003bc0
ORIG_RAX: 0000000000000010 CS: 0033 SS: 002b
To solve this problem, move route.disable() before set_gsi_routes() to
remove the gsi from irqfds.items first.
This problem only exists on AMD platform, 'cause on Intel platform
kernel just return when update irte while it only prints a warning on
AMD.
Also, this patch adjusts the order of enable() and set_gsi_routes() in
unmask(), which should do no harm.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
When mask a msi irq, we set the entry.masked to be true, so kvm
hypervisor will not pass the gsi to kernel through KVM_SET_GSI_ROUTING
ioctl which update kvm->irq_routing. This will trigger kernel
panic on AMD platform when the gsi is the largest one in kernel
kvm->irqfds.items:
crash> bt
PID: 22218 TASK: ffff951a6ad74980 CPU: 73 COMMAND: "vcpu8"
#0 [ffffb1ba6707fa40] machine_kexec at ffffffff8565b397
#1 [ffffb1ba6707fa90] __crash_kexec at ffffffff85788a6d
#2 [ffffb1ba6707fb58] crash_kexec at ffffffff8578995d
#3 [ffffb1ba6707fb70] oops_end at ffffffff85623c0d
#4 [ffffb1ba6707fb90] no_context at ffffffff856692c9
#5 [ffffb1ba6707fbf8] exc_page_fault at ffffffff85f95b51
#6 [ffffb1ba6707fc50] asm_exc_page_fault at ffffffff86000ace
[exception RIP: svm_update_pi_irte+227]
RIP: ffffffffc0761b53 RSP: ffffb1ba6707fd08 RFLAGS: 00010086
RAX: ffffb1ba6707fd78 RBX: ffffb1ba66d91000 RCX: 0000000000000001
RDX: 00003c803f63f1c0 RSI: 000000000000019a RDI: ffffb1ba66db2ab8
RBP: 000000000000019a R8: 0000000000000040 R9: ffff94ca41b82200
R10: ffffffffffffffcf R11: 0000000000000001 R12: 0000000000000001
R13: 0000000000000001 R14: ffffffffffffffcf R15: 000000000000005f
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffffb1ba6707fdb8] kvm_irq_routing_update at ffffffffc09f19a1 [kvm]
#8 [ffffb1ba6707fde0] kvm_set_irq_routing at ffffffffc09f2133 [kvm]
#9 [ffffb1ba6707fe18] kvm_vm_ioctl at ffffffffc09ef544 [kvm]
RIP: 00007f143c36488b RSP: 00007f143a4e04b8 RFLAGS: 00000246
RAX: ffffffffffffffda RBX: 00007f05780041d0 RCX: 00007f143c36488b
RDX: 00007f05780041d0 RSI: 000000004008ae6a RDI: 0000000000000020
RBP: 00000000000004e8 R8: 0000000000000008 R9: 00007f05780041e0
R10: 00007f0578004560 R11: 0000000000000246 R12: 00000000000004e0
R13: 000000000000001a R14: 00007f1424001c60 R15: 00007f0578003bc0
ORIG_RAX: 0000000000000010 CS: 0033 SS: 002b
To solve this problem, move route.disable() before set_gsi_routes() to
remove the gsi from irqfds.items first.
This problem only exists on AMD platform, 'cause on Intel platform
kernel just return when update irte while it only prints a warning on
AMD.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Add a field for its length and fix up users.
Things work just because all hardcoded values agree with each other.
This is prone to breakage.
No functional change.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
This commit adds event fds and the event handler to send/receive
requests and responses from the GDB thread. It also adds `--gdb` flag to
enable GDB stub feature.
Signed-off-by: Akira Moroo <retrage01@gmail.com>
This commit adds `stop_on_boot` to `Vm` so that the VM stops before
starting on boot requested. This change is required to keep the target
VM stopped before a debugger attached as the user expected.
Signed-off-by: Akira Moroo <retrage01@gmail.com>
This commit adds `Vm::debug_request` to handle `GdbRequestPayload`,
which will be sent from the GDB thread.
Signed-off-by: Akira Moroo <retrage01@gmail.com>
This commit adds initial gdb.rs implementation for `Debuggable` trait to
describe a debuggable component. Some part of the trait bound
implementations is based on the crosvm GDB stub code [1].
[1] https://github.com/google/crosvm/blob/main/src/gdb.rs
Signed-off-by: Akira Moroo <retrage01@gmail.com>
This commit adds `KVM_SET_GUEST_DEBUG` and `KVM_TRANSLATE` ioctls to
seccomp filter to enable guest debugging without `--seccomp=false`.
Signed-off-by: Akira Moroo <retrage01@gmail.com>
This commit adds `VmState::BreakPoint` to handle hardware breakpoint.
The VM will enter this state when a breakpoint hits or a debugger
interrupts the execution.
Signed-off-by: Akira Moroo <retrage01@gmail.com>
42b5d4a2f7 has changed how the PciBdf
field of a DeviceNode is represented (from an int32 to its own struct).
To avoid marshelling / demarshelling issues for the projects relying on
the openapi auto generated code, let's propagate the change, updating
the yaml file accordingly.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
`Dies per package` setting of VCPU topology doesnot apply on AArch64.
Now we only accept `1` value. This way we can make the `dies` field
transparent, avoid it from impacting the topology setting.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Based on the helpers from the hypervisor crate, the VMM can identify
what type of hypercall has been issued through the KVM_EXIT_TDX reason.
For now, we only log warnings and set the status to INVALID_OPERAND
since these hypercalls aren't supported. The proper handling will be
implemented later.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Since the object returned from CpuManager.create_vcpu() is never used,
we can avoid the cloning of this object.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By having the DeviceNode storing a PciBdf, we simplify the internal code
as well as allow for custom Serialize/Deserialize implementation for the
PciBdf structure. These custom implementations let us display the PCI
s/b/d/f in a human readable format.
Fixes#3711
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
As we've added support for cold adding devices to a VM that was created
but not already started, we should propagate the `204` response
generated on those cases to the yaml file, so openapi-generator can
produce the correct client code on the go side, to handle both `200` and
`204` successful results.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Instead of erroring out when trying to change the configuration of the
VM somewhere between the VM was created but not yet booted, let's allow
users to change that without any issue, as long as the VM has already
been created.
Fixes: #3639
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add very basic unit for the vm_add_$device() functions, so we can
easily expand those when changing its behaviour in the coming commits.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Instead of doing the validation of the configuration change as part of
the vm, let's do this in the uper layer, in the Vmm.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's move add_to_config to config.rs so it can be used from both inside
and outside of the vm.rs file.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
TDx support is already present on the project for quite some time, but
the TDx configuration was not yet exposed to the ones using CH via the
OpenAPI auto generated code.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Since the devices behind the IOMMU cannot be changed at runtime we offer
the ability to place all devices on user chosen segments behind the
IOMMU. This allows the hotplugging of devices behind the IOMMU provided
that they are assigned to a segment that is located behind the iommu.
Fixes: #911
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Adding a new parameter free_page_reporting=on|off to the balloon device
so that we can enable the corresponding feature from virtio-balloon.
Running a VM with a balloon device where this feature is enabled allows
the guest to report pages that are free from guest's perspective. This
information is used by the VMM to release the corresponding pages on the
host.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to allow for human readable output for the VM configuration, we
pull it out of the snapshot, which becomes effectively the list of
states from the VM. The configuration is stored through a dedicated file
in JSON format (not including any binary output).
Having the ability to read and modify the VM configuration manually
between the snapshot and restore phases makes debugging easier, as well
as empowers users for extending the use cases relying on the
snapshot/restore feature.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
As per this kernel documentation:
For KVM_EXIT_IO, KVM_EXIT_MMIO, KVM_EXIT_OSI, KVM_EXIT_PAPR, KVM_EXIT_XEN,
KVM_EXIT_EPR, KVM_EXIT_X86_RDMSR and KVM_EXIT_X86_WRMSR the corresponding
operations are complete (and guest state is consistent) only after userspace
has re-entered the kernel with KVM_RUN. The kernel side will first finish
incomplete operations and then check for pending signals.
The pending state of the operation is not preserved in state which is
visible to userspace, thus userspace should ensure that the operation is
completed before performing a live migration. Userspace can re-enter the
guest with an unmasked signal pending or with the immediate_exit field set
to complete pending operations without allowing any further instructions
to be executed.
Since we capture the state as part of the pause and override it as part
of the resume we must ensure the state is consistent otherwise we will
lose the results of the MMIO or PIO operation that caused the exit from
which we paused.
Fixes: #3658
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
If a payload is found in the TDVF section, and after it's been copied to
the guest memory, make sure to create the corresponding TdPayload
structure and insert it through the HOB.
Signed-off-by: Jiaqi Gao <jiaqi.gao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In case of TDX, if a kernel and/or a command line are provided by the
user, they can't be treated the same way as for the non-TDX case. That
is why this patch ensures the function load_kernel() is only invoked for
the non-TDX case.
For the TDX case, whenever TDVF contains a Payload and/or PayloadParam
sections, the file provided through --kernel and the parameters provided
through --cmdline are copied at the locations specified by each TDVF
section.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The TDVF specification has been updated with the ability to provide a
specific payload, which means we will be able to achieve direct kernel
boot.
For that reason, let's not prevent the user from using --kernel
parameter when running with TDX.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that we introduced a separate method to indicate when the migration
is started, both start_dirty_log() and stop_dirty_log() don't have to
carry an implicit meaning as they can focus entirely on the dirty log
being started or stopped.
For that reason, we can now safely move stop_dirty_log() to the code
section performing non-local migration. It makes only sense to stop
logging dirty pages if this has been started before.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to clearly decouple when the migration is started compared to
when the dirty logging is started, we introduce a new method to the
Migratable trait. This clarifies the semantics as we don't end up using
start_dirty_log() for identifying when the migration has been started.
And similarly, we rely on the already existing complete_migration()
method to know when the migration has been ended.
A bug was reported when running a local migration with a vhost-user-net
device in server mode. The reason was because the migration_started
variable was never set to "true", since the start_dirty_log() function
was never invoked.
Signed-off-by: lizhaoxin1 <Lxiaoyouling@163.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
While cloud-hypervisor does support receiving the file descriptors of a
tuntap device, advertising the fds structure via the openAPI can lead to
misinterpretations of what can and what should be done.
An unadvertised consumer will think that they could rather just set the
file descriptors there directly, or even pass them as a byte array.
However, the proper way to go in those cases would be actually sending
those via send_msg(), together with the request.
As hacking the openAPI auto-generated code to properly do this is not
*that* trivial, and as doing so during a `create VM` request is not
supported, we better not advertising those.
Please, for more details, also check:
https://github.com/cloud-hypervisor/cloud-hypervisor/pull/3607#issuecomment-1020935523
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Based on the latest code from the micro-http crate, this patch adds the
support for multiple file descriptors to be sent along with the add-net
request. This means we can now hotplug multiqueue network interface to
the VM.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Moving the whole codebase to rely on the AccessPlatform definition from
vm-virtio so that we can fully remove it from virtio-queue crate.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
If a PMU is enabled in a VM, we also need to initialize the PMU
when the VM is restored. Otherwise, vCPUs cannot be started after
the VM is restored.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
When enable PMU on arm64, ioctl with group KVM_HAS_DEVICE_ATTR will be
blocked by seccomp, add it to authorized list.
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Relying on helpers for creating the ACPI tables and to add each table to
the HOB, this patch connects the dot to provide the set of ACPI tables
to the TD firmware.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The way to create ACPI tables for TDX is different as each table must be
passed through the HOB. This means the XSDT table is not required since
the firmware will take care of creating it. Same for RSDP, this is
firmware responsibility to provide it to the guest.
That's why this patch creates a TDX dedicated function, returning a list
of Sdt objects, which will let the calling code copy the content of each
table through the HOB.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In case of TDX, we don't want to create the ACPI tables the same way we
do for all the other use cases. That's because the ACPI tables don't
need to be written to guest memory at a specific address, instead they
are passed directly through the HOB.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
It's been decided the ACPI tables will be passed to the firmware in a
different way, rather than using TD_VMM_DATA. Since TD_VMM_DATA was
introduced for this purpose, there's no reason to keep it in our
codebase.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This table is listed as required in the ARM Base Boot Requirements
document. The particular need arises to make the serial debugging of
Windows guest functional.
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
Ensure all pending virtio activations (as triggered by MMIO write on the
vCPU threads leading to a barrier wait) are completed before pausing the
vCPUs as otherwise there will a deadlock with the VMM waiting for the
vCPU to acknowledge it's pause and the vCPU waiting for the VMM to
activate the device and release the barrier.
Fixes: #3585
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
These are the leftovers from the commit 8155be2:
arch: aarch64: vm_memory is not required when configuring vcpu
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
When in local migration mode send the FDs for the guest memory over the
socket along with the slot that the FD is associated with. This removes
the requirement for copying the guest RAM and gives significantly faster
live migration performance (of the order of 3s to 60ms).
Fixes: #3566
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Create the VM using the FDs (wrapped in Files) that have been received
during the migration process.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
If this FD (wrapped in a File) is supplied when the RAM region is being
created use that over creating a new one.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This function is used to open an FD (wrapped in a File) that points to
guest memory from memfd_create() or backed on the filesystem.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Drop the unused parameter throughout the code base.
Also take the chance to drop a needless clone.
No functional change intended.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
We've been currently using "fd" as the field name, but it should be
called "fds" since 6664e5a6e7 introduced
the name change on the structure field.
Fixes: #3560
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
`tap` has its default value set to `None`, but in the openapi yaml file
we've been setting it to `""`.
When using this code on the Kata Containers side we'd be hit by a non
expected behaviour of cloud-hypervisor, as even when using a different
method to initialise the `tuntap` device the code would be treated as if
using `--net tap` (which is a valid use-case).
Related: #3554
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
warning: unnecessary use of `to_string`
--> vmm/src/config.rs:2199:38
|
2199 | ... .get(&memory_zone.to_string())
| ^^^^^^^^^^^^^^^^^^^^^^^^ help: use: `memory_zone`
|
= note: `#[warn(clippy::unnecessary_to_owned)]` on by default
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_to_owned
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
warning: unneeded late initalization
--> vmm/src/acpi.rs:525:5
|
525 | let mut prev_tbl_len: u64;
| ^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: `#[warn(clippy::needless_late_init)]` on by default
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_late_init
help: declare `prev_tbl_len` here
|
552 | let mut prev_tbl_len: u64 = madt.len() as u64;
| ~~~~~~~~~~~~~~~~~~~~~~~~~
warning: unneeded late initalization
--> vmm/src/acpi.rs:526:5
|
526 | let mut prev_tbl_off: GuestAddress;
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_late_init
help: declare `prev_tbl_off` here
|
553 | let mut prev_tbl_off: GuestAddress = madt_offset;
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This crate was used in the integration tests to allow the tests to
continue and clean up after a failure. This isn't necessary in the unit
tests and adds a large build dependency chain including an unmaintained
crate.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
If the underlying kernel is old PTY resize is disabled and this is
represented by the use of None in the provided Option<File> type. In the
virtio-console PTY path don't blindly unwrap() the value that will be
preserved across a reboot.
Fixes: #3496
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
It's important to maintain the ability to run in a non-TDX environment
a Cloud Hypervisor binary with the 'tdx' feature enabled.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Setting up the SIGWINCH handler requires at least Linux 5.7. However
this functionality is not required for basic PTY operation.
Fixes: #3456
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Advertise the PCI MMIO config spaces here so that the MMIO config space
is correctly recognised.
Tested by: --platform num_pci_segments=1 or 16 hotplug NVMe vfio-user device
works correctly with hypervisor-fw & OVMF and direct kernel boot.
Fixes: #3432
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When restoring replace the internal value of the device tree rather than
replacing the Arc<Mutex<DeviceTree>> itself. This is fixes an issue
where the AddressManager has a copy of the the original
Arc<Mutex<DeviceTree>> from when the DeviceManager was created. The
original restore path only replaced the DeviceManager's version of the
Arc<Mutex<DeviceTree>>. Instead replace the contents of the
Arc<Mutex<DeviceTree>> so all users see the updated version.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Saving the KVM clock and restoring it is key for correct behaviour of
the VM when doing snapshot/restore or live migration. The clock is
restored to the KVM state as part of the Vm::resume() method prior to
that it must be extracted from the state object and stored for later use
by this method. This change simplifies the extraction and storage part
so that it is done in the same way for both snapshot/restore and live
migration.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The constant `PCI_MMIO_CONFIG_SIZE` defined in `vmm/pci_segment.rs`
describes the MMIO configuation size for each PCI segment. However,
this name conflicts with the `PCI_MMCONFIG_SIZE` defined in `layout.rs`
in the `arch` crate, which describes the memory size of the PCI MMIO
configuration region.
Therefore, this commit renames the `PCI_MMIO_CONFIG_SIZE` to
`PCI_MMIO_CONFIG_SIZE_PER_SEGMENT` and moves this constant from `vmm`
crate to `arch` crate.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Currently, a tuple containing PCI space start address and PCI space
size is used to pass the PCI space information to the FDT creator.
In order to support the multiple PCI segment for FDT, more information
such as the PCI segment ID should be passed to the FDT creator. If we
still use a tuple to store these information, the code flexibility and
readablity will be harmed.
To address this issue, this commit replaces the tuple containing the
PCI space information to a structure `PciSpaceInfo` and uses a vector
of `PciSpaceInfo` to store PCI space information for each segment, so
that multiple PCI segment information can be passed to the FDT together.
Note that the scope of this commit will only contain the refactor of
original code, the actual multiple PCI segments support will be in
following series, and for now `--platform num_pci_segments` should only
be 1.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
In order to avoid the identity map region to conflict with a possible
firmware being placed in the last 4MiB of the 4GiB range, we must set
the address to a chosen location. And it makes the most sense to have
this region placed right after the TSS region.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Place the 3 page TSS at an explicit location in the 32-bit address space
to avoid conflicting with the loaded raw firmware.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Added fields:
- `Memory address size limit`: the missing of this field triggered
warnings in guest kernel
- `Node ID`
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
After introducing multiple PCI segments, the `devid` value in
`kvm_irq_routing_entry` exceeds the maximum supported range on AArch64.
This commit restructed the `devid` to the allowed range.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
If the provided binary isn't an ELF binary assume that it is a firmware
to be loaded in directly. In this case we shouldn't program any of the
registers as KVM starts in that state.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
That function call can return -1 when it fails. Wrapping -1 into File
causes the code to panic when the File is dropped.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
I encountered some trouble trying to use a virtio-console hooked up to
a PTY. Reading from the PTY would produce stuff like this
"\n\nsh-5.1# \n\nsh-5.1# " (where I'm just pressing enter at a shell
prompt), and a terminal would render that like this:
----------------------------------------------------------------
sh-5.1#
sh-5.1#
----------------------------------------------------------------
This was because we weren't disabling the ICRNL termios iflag, which
turns carriage returns (\r) into line feeds (\n). Other raw mode
implementations (like QEMU's) set this flag, and don't have this
problem.
Instead of fixing our raw mode implementation to just disable ICRNL,
or copy the flags from QEMU's, though, here I've changed it to use the
raw mode implementation in libc. It seems to work correctly in my
testing, and means we don't have to worry about what exactly raw mode
looks like under the hood any more.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Fix seccomp violation when trying to add the out FD to the epoll loop
when the serial buffer needs to be flushed.
0x00007ffff7dc093e in epoll_ctl () at ../sysdeps/unix/syscall-template.S:120
0x0000555555db9b6d in epoll::ctl (epfd=56, op=epoll::ControlOptions::EPOLL_CTL_MOD, fd=55, event=...)
at /home/rob/.cargo/registry/src/github.com-1ecc6299db9ec823/epoll-4.3.1/src/lib.rs:155
0x00005555556f5127 in vmm::serial_buffer::SerialBuffer::add_out_poll (self=0x7fffe800b5d0) at vmm/src/serial_buffer.rs:101
0x00005555556f583d in vmm::serial_buffer::{impl#1}::write (self=0x7fffe800b5d0, buf=...) at vmm/src/serial_buffer.rs:139
0x0000555555a30b10 in std::io::Write::write_all<vmm::serial_buffer::SerialBuffer> (self=0x7fffe800b5d0, buf=...)
at /rustc/59eed8a2aac0230a8b53e89d4e99d55912ba6b35/library/std/src/io/mod.rs:1527
0x0000555555ab82fb in devices::legacy::serial::Serial::handle_write (self=0x7fffe800b520, offset=0, v=13) at devices/src/legacy/serial.rs:217
0x0000555555ab897f in devices::legacy::serial::{impl#2}::write (self=0x7fffe800b520, _base=1016, offset=0, data=...) at devices/src/legacy/serial.rs:295
0x0000555555f30e95 in vm_device:🚌:Bus::write (self=0x7fffe8006ce0, addr=1016, data=...) at vm-device/src/bus.rs:235
0x00005555559406d4 in vmm::vm::{impl#4}::pio_write (self=0x7fffe8009640, port=1016, data=...) at vmm/src/vm.rs:459
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When running with `--serial pty --console pty --seccomp=false` the
SIGWICH listener thread would panic as the seccomp filter was empty.
Adopt the mechanism used in the rest of the code and check for non-empty
filter before trying to apply it.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
With the introduction of a new option `affinity` to the `cpus`
parameter, Cloud Hypervisor can now let the user choose the set
of host CPUs where to run each vCPU.
This is useful when trying to achieve CPU pinning, as well as making
sure the VM runs on a specific NUMA node.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Give the option parser the ability to handle tuples with inner brackets
containing list of integers. The following example can now be handled
correctly "option=[key@[v1-v2,v3,v4]]" which means the option is
assigned a tuple with a key associated with a list of integers between
the range v1 - v2, as well as v3 and v4.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Always properly initialize vectors so that we don't run in undefined
behaviors when the vector gets dropped.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Creates a new generic type Tuple so that the same implementation of
FromStr trait can be reused for both parsing a list of two integers and
parsing a list of one integer associated with a list of integers.
This anticipates the need for retrieving sublists, which will be needed
when trying to describe the host CPU affinity for every vCPU.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The elements of a list should be using commas as the correct delimiter
now that it is supported. Deprecate use of colons as delimiter.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This allocator allocates 64-bit MMIO addresses for use with platform
devices e.g. ACPI control devices and ensures there is no overlap with
PCI address space ranges which can cause issues with PCI device
remapping.
Use this allocator the ACPI platform devices.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rather than use the system MMIO allocator for RAM use an allocator that
covers the full RAM range.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This is because the SGX region will be placed between the end of ram and
the start of the device area.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
With the segment id now encoded in the bdf it is not necessary to have
the separate field for it.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In particular use the accessor for getting the device id from the bdf.
As a side effect the VIOT table is now segment aware.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Since each segment must have a non-overlapping memory range associated
with it the device memory must be equally divided amongst all segments.
A new allocator is used for each segment to ensure that BARs are
allocated from the correct address ranges. This requires changes to
PciDevice::allocate/free_bars to take that allocator and when
reallocating BARs the correct allocator must be identified from the
ranges.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
For all the devices that support being hotplugged (disk, net, pmem, fs
and vsock) add "pci_segment" option and propagate that through to the
addition onto the PCI busses.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Move the decision on whether to use a 64-bit bar up to the DeviceManager
so that it can use both the device type (e.g. block) and the PCI segment
ID to decide what size bar should be used.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Generate a set of 8 IRQs and round-robin distribute those over all the
slots for a bus. This same set of IRQs is then used for all PCI
segments.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The platform config may specify a number of PCI segments to use, if this
greater than 1 then we add supplemental PCI segments as well as the
default segment.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This currently contains only the number over PCI segments to create.
This is limited to 16 at the moment which should allow 496 user specified
PCI devices.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
For the bus scanning the GED AML code now calls into a PSCN method that
scans all buses. This approach was chosen since it handles the case
correctly where one GED interrupt is services for two hotplugs on
distinct segments.
The PCIU and PCID field values are now determined by the PSEG field that
is uses to select which segment those values should be used for.
Similarly _EJ0 will notify based on the value of _SEG.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Replace the hardcoded zero PCI segment id when adding devices to the bus
and extend the DeviceTree to hold the PCI segment id.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Since each segment must have disjoint address spaces only advertise
address space in the 32-bit range and the PIO address space on the
default (zero) segment.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Split PciSegment::new_default_segment() into a separate
PciSegment::new() and those parts required only for the default segment
(PIO PCI config device.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
For now this still contains just one segment but is expanding in
preparation for more segments.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This commit moves the code that generates the DSDT data for the PCI bus
into PciSegment making no functional changes to the generated AML.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Variables that start with underscore are used to silence rustc.
Normally those variables are not used in code.
This patch drops the underscore from variables that are used. This is
less confusing to readers.
No functional change intended.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
This makes it much easier to use since the info!() level produces far
fewer messages and thus has less overhead.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Relying on the vm-virtio/virtio-queue crate from rust-vmm which has been
copied inside the Cloud Hypervisor tree, the entire codebase is moved to
the new definition of a Queue and other related structures.
The reason for this move is to follow the upstream until we get some
agreement for the patches that we need on top of that to make it
properly work with Cloud Hypervisor.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When allocating PCI MMIO BARs they should always be naturally aligned
(i.e. aligned to the size of the BAR itself.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The allocate_bars method has a side effect which collates the BARs used
for the device and stores them internally. Ensure that any use of this
internal state is after the state is created otherwise no MMIO regions
will be seen and so none will be mapped.
Fixes: #3237
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Instead of creating a MemoryManager from scratch, let's reuse the same
code path used by snapshot/restore, so that memory regions are created
identically to what they were on the source VM.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that all the pieces are in place, we can restore a VM with the new
codepath that restores properly all memory regions, allowing for ACPI
memory hotplug to work properly with snapshot/restore feature.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Extending the MemoryManager::new() function to be able to create a
MemoryManager from data that have been previously stored instead of
always creating everything from scratch.
This change brings real added value as it allows a VM to be restored
respecting the proper memory layout instead of hoping the regions will
be created the way they were before.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Storing multiple data coming from the MemoryManager in order to be able
to restore without creating everything from scratch.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This new function will be able to restore memory regions and memory
zones based on the GuestMemoryMapping list that will be provided through
snapshot/restore and migration phases.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This can help identifying which zone relates to which memory range.
This is going to be useful when recreating GuestMemory regions from
the previous layout instead of having to recreate everything from
scratch.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Create a dedicated function to factorize the allocation of the memory
ranges, and helping with the simplification of MemoryManager::new()
function.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By updating the list of GuestMemory regions with the virtio-mem ones
before the creation of the MemoryManager, we know the GuestMemory is up
to date and the allocation of memory ranges is simplified afterwards.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to simplify MemoryManager::new() function. let's move the
memory configuration validation to its own function.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Move the PciSegment struct and the associated code to a new file. This
will allow some clearer separation between the core DeviceManager and
PCI handling.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Move the PCI related state from the DeviceManager struct to a PciSegment
struct inside the DeviceManager. This is in preparation for multiple
segment support. Currently this state is just the bus itself, the MMIO
and PIO config devices and hotplug related state.
The main change that this required is using the Arc<Mutex<PciBus>> in
the device addition logic in order to ensure that
the bus could be created earlier.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When using PVH for booting (which we use for all firmwares and direct
kernel boot) the Linux kernel does not configure LA57 correctly. As such
we need to limit the address space to the maximum 4-level paging address
space.
If the user knows that their guest image can take advantage of the
5-level addressing and they need it for their workload then they can
increase the physical address space appropriately.
This PR removes the TDX specific handling as the new address space limit
is below the one that that code specified.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Whenever running TDX, we must pass the ACPI tables to the TDVF firmware
running in the guest. The proper way to do this is by adding the tables
to the TdHob as a TdVmmData type, so that TDVF will know how to access
these tables and expose them to the guest OS.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Instead of having the ACPI tables being created both in x86_64 and
aarch64 implementations of configure_system(), we can remove the
duplicated code by moving the ACPI tables creation in vm.rs inside the
boot() function.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The argument `prefault` is provided in MemoryManager, but it can
only be used by SGX and restore.
With prefault (MAP_POPULATE) been set, subsequent page faults will
decrease during running, although it will make boot slower.
This commit adds `prefault` in MemoryConfig and MemoryZoneConfig.
To resolve conflict between memory and restore, argument
`prefault` has been changed from `bool` to `Option<bool>`, when
its value is None, config from memory will be used, otherwise
argument in Option will be used.
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
By using a single file for storing the memory ranges, we simplify the
way snapshot/restore works by avoiding multiples files, but the main and
more important point is that we have now a way to save only the ranges
that matter. In particular, the ranges related to virtio-mem regions are
not always fully hotplugged, meaning we don't want to save the entire
region. That's where the usage of memory ranges is interesting as it
lets us optimize the snapshot/restore process when one or multiple
virtio-mem regions are involved.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The function memory_range_table() will be reused by the MemoryManager in
a following patch to describe all the ranges that we should snapshot.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Copy only the memory ranges that have been plugged through virtio-mem,
allowing for an interesting optimization regarding the time it takes to
migrate a large virtio-mem device. Even if the hotpluggable space is
very large (say 64GiB), if only 1GiB has been previously added to the
VM, only 1GiB will be sent to the destination VM, avoiding the transfer
of the remaining 63GiB which are unused.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By creating the BlocksState object in the MemoryManager, we can directly
provide it to the virtio-mem device when being created. This will allow
the MemoryManager through each VirtioMemZone to have a handle onto the
blocks that are plugged at any point in time.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This will be helpful to support the creation of a MemoryRangeTable from
virtio-mem, as it uses 2M pages.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adding the snapshot/restore support along with migration as well,
allowing a VM with virtio-mem devices attached to be properly
migrated.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The amount of memory plugged in the virtio-mem region should always be
kept up to date in the hotplugged_size field from VirtioMemZone.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
There's no need to duplicate the GuestMemory for snapshot purpose, as we
always have a handle onto the GuestMemory through the guest_memory
field.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Since we only support a single PCI bus right now advertise only a single
bus in the ACPI tables. This reduces the number of VM exits from probing
substantially.
Number of PCI config I/O port exits: 17871 -> 1551 (91% reduction) with
direct kernel boot.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Use a simpler method for extracting the affected slot on the eject
command. Also update the terminology to reflect that this a slot rather
than a bdf (which is what device id refers to elsewhere.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Refactor the serial buffer handling in order to write the serial
buffer's output to a PTY connected after the serial device stops being
written to by the guest.
This change moves the serial buffer initialization inside the serial
manager. That is done to allow the serial buffer to be made aware of
the PTY and epoll fds needed in order to modify the
EpollDispatch::File trigger. These are then used by the serial buffer
to trigger an epoll event when the PTY fd is writable and the buffer
has content in it. They are also used to remove the trigger when the
buffer is emptied in order to avoid unnecessary wake-ups.
Signed-off-by: William Douglas <william.douglas@intel.com>
Both read_exact_from() and write_all_to() functions from the GuestMemory
trait implementation in vm-memory are buggy. They should retry until
they wrote or read the amount of data that was expected, but instead
they simply return an error when this happens. This causes the migration
to fail when trying to send important amount of data through the
migration socket, due to large memory regions.
This should be eventually fixed in vm-memory, and here is the link to
follow up on the issue: https://github.com/rust-vmm/vm-memory/issues/174
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Implement the infrastructure that lets a virtio-mem device map the guest
memory into the device. This is necessary since with virtio-mem zones
memory can be added or removed and the vfio-user device must be
informed.
Fixes: #3025
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
By moving this from the VfioUserPciDevice to DeviceManager the client
can be reused for handling DMA mapping behind an IOMMU.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
For vfio-user the mapping handler is per device and needs to be removed
when the device in unplugged.
For VFIO the mapping handler is for the default VFIO container (used
when no vIOMMU is used - using a vIOMMU does not require mappings with
virtio-mem)
To represent these two use cases use an enum for the handlers that are
stored.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Looking up devices on the port I/O bus is time consuming during the
boot at there is an O(lg n) tree lookup and the overhead from taking a
lock on the bus contents.
Avoid this by adding a fast path uses the hardcoded port address and
size and directs PCI config requests directly to the device.
Command line:
target/release/cloud-hypervisor --kernel ~/src/linux/vmlinux --cmdline "root=/dev/vda1 console=ttyS0" --serial tty --console off --disk path=~/workloads/focal-server-cloudimg-amd64-custom-20210609-0.raw --api-socket /tmp/api
PIO exit: 17913
PCI fast path: 17871
Percentage on fast path: 99.8%
perf before:
marvin:~/src/cloud-hypervisor (main *)$ perf report -g | grep resolve
6.20% 6.20% vcpu0 cloud-hypervisor [.] vm_device:🚌:Bus::resolve
perf after:
marvin:~/src/cloud-hypervisor (2021-09-17-ioapic-fast-path *)$ perf report -g | grep resolve
0.08% 0.08% vcpu0 cloud-hypervisor [.] vm_device:🚌:Bus::resolve
The compromise required to implement this fast path is bringing the
creation of the PciConfigIo device into the DeviceManager::new() so that
it can be used in the VmmOps struct which is created before
DeviceManager::create_devices() is called.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The MSI IOVA address on X86 and AArch64 is different.
This commit refactored the code to receive the MSI IOVA address and size
from device_manager, which provides the actual IOVA space data for both
architectures.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Add a virtio-iommu node into FDT if iommu option is turned on. Now we
support only one virtio-iommu device.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
This change switches from handling serial input in the VMM thread to
its own thread controlled by the SerialManager.
The motivation for this change is to avoid the VMM thread being unable
to process events while serial input is happening and vice versa.
The change also makes future work flushing the serial buffer on PTY
connections easier.
Signed-off-by: William Douglas <william.douglas@intel.com>
This change adds a SerialManager with its own epoll handling that
should be created and run by the DeviceManager when creating an
appropriately configured console (serial tty or pty).
Both stdin and pty input are handled by the SerialManager. The stdin
and pty specific methods used by the VMM should be removed in a future
commit.
Signed-off-by: William Douglas <william.douglas@intel.com>
The clone method for PtyPair should have been an impl of the Clone
trait but the method ended up not being used. Future work will make
use of the trait however so correct the missing trait implementation.
Signed-off-by: William Douglas <william.douglas@intel.com>
For most use cases, there is no need to create multiple VFIO containers
as it causes unwanted behaviors. Especially when passing multiple
devices from the same IOMMU group, we need to use the same container so
that it can properly list the groups that have been already opened. The
correct logic was already there in vfio-ioctls, but it was incorrectly
used from our VMM implementation.
For the special case where we put a VFIO device behind a vIOMMU, we must
create one container per device, as we need to control the DMA mappings
per device, which is performed at the container level. Because we must
keep one container per device, the vIOMMU use case prevents multiple
devices attached to the same IOMMU group to be passed through the VM.
But this is a limitation that we are fine with, especially since the
vIOMMU doesn't let us group multiple devices in the same group from a
guest perspective.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When a pty is resized (using the TIOCSWINSZ ioctl -- see ioctl_tty(2)),
the kernel will send a SIGWINCH signal to the pty's foreground process
group to notify it of the resize. This is the only way to be notified
by the kernel of a pty resize.
We can't just make the cloud-hypervisor process's process group the
foreground process group though, because a process can only set the
foreground process group of its controlling terminal, and
cloud-hypervisor's controlling terminal will often be the terminal the
user is running it in. To work around this, we fork a subprocess in a
new process group, and set its process group to be the foreground
process group of the pty. The subprocess additionally must be running
in a new session so that it can have a different controlling
terminal. This subprocess writes a byte to a pipe every time the pty
is resized, and the virtio-console device can listen for this in its
epoll loop.
Alternatives I considered were to have the subprocess just send
SIGWINCH to its parent, and to use an eventfd instead of a pipe.
I decided against the signal approach because re-purposing a signal
that has a very specific meaning (even if this use was only slightly
different to its normal meaning) felt unclean, and because it would
have required using pidfds to avoid race conditions if
cloud-hypervisor had terminated, which added complexity. I decided
against using an eventfd because using a pipe instead allows the child
to be notified (via poll(2)) when nothing is reading from the pipe any
more, meaning it can be reliably notified of parent death and
terminate itself immediately.
I used clone3(2) instead of fork(2) because without
CLONE_CLEAR_SIGHAND the subprocess would inherit signal-hook's signal
handlers, and there's no other straightforward way to restore all signal
handlers to their defaults in the child process. The only way to do
it would be to iterate through all possible signals, or maintain a
global list of monitored signals ourselves (vmm:vm::HANDLED_SIGNALS is
insufficient because it doesn't take into account e.g. the SIGSYS
signal handler that catches seccomp violations).
Signed-off-by: Alyssa Ross <hi@alyssa.is>
This prepares us to be able to handle console resizes in the console
device's epoll loop, which we'll have to do if the output is a pty,
since we won't get SIGWINCH from it.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Musl often uses mmap to allocate memory where Glibc would use brk.
This has caused seccomp violations for me on the API and signal
handling threads.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
error: all if blocks contain the same code at the end
--> vmm/src/memory_manager.rs:884:9
|
884 | / Ok(mm)
885 | | }
| |_________^
Signed-off-by: Bo Chen <chen.bo@intel.com>
This concept ends up being broken with multiple types on input connected
e.g. console on TTY and serial on PTY. Already the code for checking for
injecting into the serial device checks that the serial is configured.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Introduce a common solution for spawning the virtio threads which will
make it easier to add the panic handling.
During this effort I discovered that there were no seccomp filters
registered for the vhost-user-net thread nor the vhost-user-block
thread. This change also incorporates basic seccomp filters for those as
part of the refactoring.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Current AArch64 power button is only for device tree using a PL061
GPIO controller device. Since AArch64 now supports ACPI, this
commit extend the power button on AArch64 to:
- Using GED for ACPI+UEFI boot.
- Using PL061 for device tree boot.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
These statements are useful for understanding the cause of reset or
shutdown of the VM and are not spammy so should be included at info!()
level.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Despite setting up a dedicated thread for signal handling, we weren't
making sure that the signals we were listening for there were actually
dispatched to the right thread. While the signal-hook provides an
iterator API, so we can know that we're only processing the signals
coming out of the iterator on our signal handling thread, the actual
signal handling code from signal-hook, which pushes the signals onto
the iterator, can run on any thread. This can lead to seccomp
violations when the signal-hook signal handler does something that
isn't allowed on that thread by our seccomp policy.
To reproduce, resize a terminal running cloud-hypervisor continuously
for a few minutes. Eventually, the kernel will deliver a SIGWINCH to
a thread with a restrictive seccomp policy, and a seccomp violation
will trigger.
As part of this change, it's also necessary to allow rt_sigreturn(2)
on the signal handling thread, so signal handlers are actually allowed
to run on it. The fact that this didn't seem to be needed before
makes me think that signal handlers were almost _never_ actually
running on the signal handling thread.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Move the processing of the input from stdin, PTY or file from the VMM
thread to the existing virtio-console thread. The handling of the resize
of a virtio-console has not changed but the name of the struct used to
support that has been renamed to reflect its usage.
Fixes: #3060
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Downcasting of GicDevice trait might fail. Therefore we try to
downcast the trait first and only if the downcasting succeeded we
can then use the object to call methods. Otherwise, do nothing and
log the failure.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This commit implements the GIC (including both GICv3 and GICv3ITS)
Pausable trait. The pause of device manager will trigger a "pause"
of GIC, where we flush GIC pending tables and ITS tables to the
guest RAM.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This prevents the boot of the guest kernel from being blocked by
blocking I/O on the serial output since the data will be buffered into
the SerialBuffer.
Fixes: #3004
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Introduce a dynamic buffer for storing output from the serial port. The
SerialBuffer implements std::io::Write and can be used in place of the
direct output for the serial device.
The internals of the buffer is a vector that grows dynamically based on
demand up to a fixed size at which point old data will be overwritten.
Currently the buffer is only flushed upon writes.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Remove the indirection of a dispatch table and simply use the enum as
the event data for the events.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
