No further changes are necessary that adding a #[derive(Error)] as there
is a manual implementation of Display.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Extend VfioCommon structure to own the MSI interrupt manager. This will
be useful for implementing the restore code path.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This carries a string that is exposed via DMI/SMBIOS and is particularly
useful for cloud-init initialisation.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Use a single enum member for representing errors from the internal API.
This avoids the ugly duplication of the API call name in the error
message:
e.g.
$ target/debug/ch-remote --api-socket /tmp/api resize --cpus 2
Error running command: Server responded with an error: InternalServerError: VmResize(VmResize(CpuManager(DesiredVCpuCountExceedsMax)))
Becomes:
$ target/debug/ch-remote --api-socket /tmp/api resize --cpus 2
Error running command: Server responded with an error: InternalServerError: ApiError(VmResize(CpuManager(DesiredVCpuCountExceedsMax)))
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Instead of defining some very generic resources as PioAddressRange or
MmioAddressRange for each PCI BAR, let's move to the new Resource type
PciBar in order to make things clearer. This allows the code for being
more readable, but also removes the need for hard assumptions about the
MMIO and PIO ranges. PioAddressRange and MmioAddressRange types can be
used to describe everything except PCI BARs. BARs are very special as
they can be relocated and have special information we want to carry
along with them.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to make the code more consistent and easier to read, we remove
the former tuple that was used to describe a BAR, replacing it with the
existing structure PciBarConfiguration.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By factorizing the algorithm untangling TDVF sections from guest RAM
into a dedicated function, we can write some unit tests to validate it
properly achieves what we expect.
Adding the "tdx" feature to the unit tests, otherwise it wouldn't get
tested.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By adding a new method id() to the PciDevice trait, we allow the caller
to retrieve a unique identifier. This is used in the context of BAR
relocation to identify the device being relocated, so that we can update
the DeviceTree resources for all PCI devices (and not only
VirtioPciDevice).
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By returning the new PCI resources from add_pci_device(), we allow the
factorization of the code translating the BARs into resources. This
allows VIRTIO, VFIO and vfio-user to add the resources to the DeviceTree
node.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Relying on the function introduced recently to get the PCI resources and
handle the restore case, both VFIO and vfio-user device creation paths
now have access to PCI resources, which can be provided to the function
add_pci_device().
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Create a dedicated function for getting the PCI segment, b/d/f and
optional resources. This is meant for handling the potential case of a
restore.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Updating the way of restoring BAR addresses for virtio-pci by providing
a more generic approach that will be reused for other PciDevice
implementations (i.e VfioPcidevice and VfioUserPciDevice).
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The calls to these functions are always preceded by a call to
InterruptSourceGroup::update(). By adding a masked boolean to that
function call it possible to remove 50% of the calls to the
KVM_SET_GSI_ROUTING ioctl as the the update will correctly handle the
masked or unmasked case.
This causes the ioctl to disappear from the perf report for a boot of
the VM.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
EDK2 execution requires a flash device at address 0.
The new added device is not a fully functional flash. It doesn't
implement any spec of a flash device. Instead, a piece of memory is used
to simulate the flash simply.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Rust 2021 edition has a few improvements over the 2018 edition. Migrate
the project to 2021 edition by following recommended migration steps.
Luckily, the code itself doesn't require fixing.
Bump MSRV to 1.56 as it is required by the 2021 edition. Also fix the
clap build dependency to make Cloud Hypervisor build again.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
This is a refactoring commit to simplify source code.
Removed some functions that only return a layout const.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Some addresses defined in `layout.rs` were of type `GuestAddress`, and
are `u64`. Now align the types of all the `*_START` definitions to
`GuestAddress`.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
The reserved space is for devices.
Some devices (like TPM) require arbitrary addresses close to 4GiB.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
`RAM_64BIT_START` was set to 1 GiB, not a real 64-bit address. Now
rename it `RAM_START` to avoid confusion.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Add a new iommu parameter to VdpaConfig in order to place the vDPA
device behind a virtual IOMMU.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The list of memory resources provided through the HOB wasn't accurate
because of the broken logic. The fix provides correct ranges to the
firmware.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on latest QEMU patches from branch tdx-qemu-2022.03.29-v7.0.0-rc1
we should only report as memory resources the TempMem sections from TDVF
sections.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The introduction of a error if live resizing is not possible is a
regression compared to the original behaviour where the new size would
be stored in the config and reflected in the next boot. This behaviour
was also inconsistent with the effect of resizing with no VM booted.
Instead of generating an error allow the code to go ahead and update the
config so that the new size will be available upon the reboot.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Similarly to the previous commit restricting the cpu resizing error only
to the situations where the vcpu amount has changed, let's do the same
with the memory and be consistent throughout our code base.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
188078467d made clear that resize should
only happen when dealing with a "dynamic" CpuManager. Although this is
very much correct, it causes a regression on Kata Containers (and on any
other consumer of Cloud Hypervisor) in cases where a resize would be
triggered but the vCPUs values wouldn't be changed.
There's no doubt Kata Containers could do better and do not call a
resize in such situations, and that's something that should **also** be
solved there. However, we should also work this around on Cloud
Hypervisor side as it introduces a regression with the current Kata
Containers code.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
By enabling the VIRTIO feature VIRTIO_F_IOMMU_PLATFORM for all
vhost-user devices when needed, we force the guest to use the DMA API,
making these devices compatible with TDX. By using DMA API, the guest
triggers the TDX codepath to share some of the guest memory, in
particular the virtqueues and associated buffers so that the VMM and
vhost-user backends/processes can access this memory.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
If EFI reset fails on the Linux kernel then it will fallthrough to CMOS
reset. Implement this as one of our reset solutions.
Fixes: #3912
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Compile this feature in by default as it's well supported on both
aarch64 and x86_64 and we only officially support using it (no non-acpi
binaries are available.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
AMX is an x86 extension adding hardware units for matrix
operations (int and float dot products). The goal of the extension is
to provide performance enhancements for these common operations.
On Linux, AMX requires requesting the permission from the kernel prior
to use. Guests wanting to make use of the feature need to have the
request made prior to starting the vm.
This change then adds the first --cpus features option amx that when
passed will enable AMX usage for guests (needs a 5.17+ kernel) or
exits with failure.
The activation is done in the CpuManager of the VMM thread as it
allows migration and snapshot/restore to work fairly painlessly for
AMX enabled workloads.
Signed-off-by: William Douglas <william.douglas@intel.com>
Disable the DAX feature from the virtio-fs implementation as the feature
is still not stable. The feature is deprecated, meaning the 'dax'
parameter will be removed in about 2 releases cycles.
In the meantime, the parameter value is ignored and forced to be
disabled.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When running non-dynamic or with virtio-mem for hotplug the ACPI
functionality should not be included on the DSDT nor does the
MemoryManager need to be placed on the MMIO bus.
Fixes: #3883
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This is now consistent with not supplying the _CRS for the device when
CpuManager is not dynamic.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rather than just printing a message return an error back through the API
if the user attempts to hotplug a device that supports being behind an
IOMMU where that device isn't placed on an IOMMU segment.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Ensure devices that are specified to be on a PCI segment that is behind
the IOMMU are IOMMU enabled if possible or error out for those devices
that do not support it.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Previously it was not possible to enable vIOMMU for a virtio device.
However with the ability to place an entire PCI segment behind the
IOMMU the IOMMU mapping needs to be setup for the virtio device if it is
behind the IOMMU.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This can already be calculated by the summing the tables reported by the
Linux kernel but this is more convenient.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Separate the destruction and cleanup of original VM and the creation of
the new one. In particular have a clear hand off point for resources
(e.g. reset EventFd) used by the new VM from the original. In the
situation where vm.shutdown() generates an error this also avoids the
Vmm reference to the Vm (self.vm) from being maintained.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the newly added Vdpa device along with the new vdpa parameter,
this patch enables the support for vDPA devices.
It's important to note this the only virtio device for which we provide
an ExternalDmaMapping instance. This will allow for the right DMA ranges
to be mapped/unmapped.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Introduce a new --vdpa parameter associated with a VdpaConfig for the
future creation of a Vdpa device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This will significantly reduce the size of the DSDT and the effort
required to parse them if there is no requirement to support
hotplug/unplug.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
If the CpuManager is dynamic it devices CPUs can be
hotplugged/unplugged.
Since TDX does not support CPU hotplug this is currently the only
determinator as to whether the CpuManager is dynamic.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
vmm.ping/vm.info will hang for PUT method, vm.create/vmm.shutdonw hang for GET method.
Because these four APIs do not write the response body when the HTTP method does not match.
Signed-off-by: LiHui <andrewli@kubesphere.io>
In case the virtio device which requires DMA mapping is placed behind a
virtual IOMMU, we shouldn't map/unmap any region manually. Instead, we
provide the DMA handler to the virtio-iommu device so that it can
trigger the proper mappings.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
If a virtio device is associated with a DMA handler, the DMA mapping and
unmapping is performed from the device manager through the handler.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Given that some virtio device might need some DMA handling, we provide a
way to store this through the VirtioPciDevice layer, so that it can be
accessed when the PCI device is removed.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In anticipation for handling potential DMA mapping/unmapping operations for a
virtio device, we extend the MetaVirtioDevice with an additional field
that holds an optional DMA handler.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The tuple of information related to each virtio device is too big, and
it's better to factorize it through a dedicated structure.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When mask a msi irq, we set the entry.masked to be true, so kvm
hypervisor will not pass the gsi to kernel through KVM_SET_GSI_ROUTING
ioctl which update kvm->irq_routing. This will trigger kernel
panic on AMD platform when the gsi is the largest one in kernel
kvm->irqfds.items:
crash> bt
PID: 22218 TASK: ffff951a6ad74980 CPU: 73 COMMAND: "vcpu8"
#0 [ffffb1ba6707fa40] machine_kexec at ffffffff8565b397
#1 [ffffb1ba6707fa90] __crash_kexec at ffffffff85788a6d
#2 [ffffb1ba6707fb58] crash_kexec at ffffffff8578995d
#3 [ffffb1ba6707fb70] oops_end at ffffffff85623c0d
#4 [ffffb1ba6707fb90] no_context at ffffffff856692c9
#5 [ffffb1ba6707fbf8] exc_page_fault at ffffffff85f95b51
#6 [ffffb1ba6707fc50] asm_exc_page_fault at ffffffff86000ace
[exception RIP: svm_update_pi_irte+227]
RIP: ffffffffc0761b53 RSP: ffffb1ba6707fd08 RFLAGS: 00010086
RAX: ffffb1ba6707fd78 RBX: ffffb1ba66d91000 RCX: 0000000000000001
RDX: 00003c803f63f1c0 RSI: 000000000000019a RDI: ffffb1ba66db2ab8
RBP: 000000000000019a R8: 0000000000000040 R9: ffff94ca41b82200
R10: ffffffffffffffcf R11: 0000000000000001 R12: 0000000000000001
R13: 0000000000000001 R14: ffffffffffffffcf R15: 000000000000005f
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffffb1ba6707fdb8] kvm_irq_routing_update at ffffffffc09f19a1 [kvm]
#8 [ffffb1ba6707fde0] kvm_set_irq_routing at ffffffffc09f2133 [kvm]
#9 [ffffb1ba6707fe18] kvm_vm_ioctl at ffffffffc09ef544 [kvm]
RIP: 00007f143c36488b RSP: 00007f143a4e04b8 RFLAGS: 00000246
RAX: ffffffffffffffda RBX: 00007f05780041d0 RCX: 00007f143c36488b
RDX: 00007f05780041d0 RSI: 000000004008ae6a RDI: 0000000000000020
RBP: 00000000000004e8 R8: 0000000000000008 R9: 00007f05780041e0
R10: 00007f0578004560 R11: 0000000000000246 R12: 00000000000004e0
R13: 000000000000001a R14: 00007f1424001c60 R15: 00007f0578003bc0
ORIG_RAX: 0000000000000010 CS: 0033 SS: 002b
To solve this problem, move route.disable() before set_gsi_routes() to
remove the gsi from irqfds.items first.
This problem only exists on AMD platform, 'cause on Intel platform
kernel just return when update irte while it only prints a warning on
AMD.
Also, this patch adjusts the order of enable() and set_gsi_routes() in
unmask(), which should do no harm.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
When mask a msi irq, we set the entry.masked to be true, so kvm
hypervisor will not pass the gsi to kernel through KVM_SET_GSI_ROUTING
ioctl which update kvm->irq_routing. This will trigger kernel
panic on AMD platform when the gsi is the largest one in kernel
kvm->irqfds.items:
crash> bt
PID: 22218 TASK: ffff951a6ad74980 CPU: 73 COMMAND: "vcpu8"
#0 [ffffb1ba6707fa40] machine_kexec at ffffffff8565b397
#1 [ffffb1ba6707fa90] __crash_kexec at ffffffff85788a6d
#2 [ffffb1ba6707fb58] crash_kexec at ffffffff8578995d
#3 [ffffb1ba6707fb70] oops_end at ffffffff85623c0d
#4 [ffffb1ba6707fb90] no_context at ffffffff856692c9
#5 [ffffb1ba6707fbf8] exc_page_fault at ffffffff85f95b51
#6 [ffffb1ba6707fc50] asm_exc_page_fault at ffffffff86000ace
[exception RIP: svm_update_pi_irte+227]
RIP: ffffffffc0761b53 RSP: ffffb1ba6707fd08 RFLAGS: 00010086
RAX: ffffb1ba6707fd78 RBX: ffffb1ba66d91000 RCX: 0000000000000001
RDX: 00003c803f63f1c0 RSI: 000000000000019a RDI: ffffb1ba66db2ab8
RBP: 000000000000019a R8: 0000000000000040 R9: ffff94ca41b82200
R10: ffffffffffffffcf R11: 0000000000000001 R12: 0000000000000001
R13: 0000000000000001 R14: ffffffffffffffcf R15: 000000000000005f
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffffb1ba6707fdb8] kvm_irq_routing_update at ffffffffc09f19a1 [kvm]
#8 [ffffb1ba6707fde0] kvm_set_irq_routing at ffffffffc09f2133 [kvm]
#9 [ffffb1ba6707fe18] kvm_vm_ioctl at ffffffffc09ef544 [kvm]
RIP: 00007f143c36488b RSP: 00007f143a4e04b8 RFLAGS: 00000246
RAX: ffffffffffffffda RBX: 00007f05780041d0 RCX: 00007f143c36488b
RDX: 00007f05780041d0 RSI: 000000004008ae6a RDI: 0000000000000020
RBP: 00000000000004e8 R8: 0000000000000008 R9: 00007f05780041e0
R10: 00007f0578004560 R11: 0000000000000246 R12: 00000000000004e0
R13: 000000000000001a R14: 00007f1424001c60 R15: 00007f0578003bc0
ORIG_RAX: 0000000000000010 CS: 0033 SS: 002b
To solve this problem, move route.disable() before set_gsi_routes() to
remove the gsi from irqfds.items first.
This problem only exists on AMD platform, 'cause on Intel platform
kernel just return when update irte while it only prints a warning on
AMD.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Move to release version v0.2.0 for both vm-virtio and vhost-user-backend
crates rather than relying on their main branch, as they might be
subject to breaking changes.
Fixes#3800
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Add a field for its length and fix up users.
Things work just because all hardcoded values agree with each other.
This is prone to breakage.
No functional change.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
This commit adds event fds and the event handler to send/receive
requests and responses from the GDB thread. It also adds `--gdb` flag to
enable GDB stub feature.
Signed-off-by: Akira Moroo <retrage01@gmail.com>
This commit adds `stop_on_boot` to `Vm` so that the VM stops before
starting on boot requested. This change is required to keep the target
VM stopped before a debugger attached as the user expected.
Signed-off-by: Akira Moroo <retrage01@gmail.com>
This commit adds `Vm::debug_request` to handle `GdbRequestPayload`,
which will be sent from the GDB thread.
Signed-off-by: Akira Moroo <retrage01@gmail.com>
This commit adds initial gdb.rs implementation for `Debuggable` trait to
describe a debuggable component. Some part of the trait bound
implementations is based on the crosvm GDB stub code [1].
[1] https://github.com/google/crosvm/blob/main/src/gdb.rs
Signed-off-by: Akira Moroo <retrage01@gmail.com>
This commit adds `KVM_SET_GUEST_DEBUG` and `KVM_TRANSLATE` ioctls to
seccomp filter to enable guest debugging without `--seccomp=false`.
Signed-off-by: Akira Moroo <retrage01@gmail.com>
This commit adds `VmState::BreakPoint` to handle hardware breakpoint.
The VM will enter this state when a breakpoint hits or a debugger
interrupts the execution.
Signed-off-by: Akira Moroo <retrage01@gmail.com>
42b5d4a2f7 has changed how the PciBdf
field of a DeviceNode is represented (from an int32 to its own struct).
To avoid marshelling / demarshelling issues for the projects relying on
the openapi auto generated code, let's propagate the change, updating
the yaml file accordingly.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
`Dies per package` setting of VCPU topology doesnot apply on AArch64.
Now we only accept `1` value. This way we can make the `dies` field
transparent, avoid it from impacting the topology setting.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Based on the helpers from the hypervisor crate, the VMM can identify
what type of hypercall has been issued through the KVM_EXIT_TDX reason.
For now, we only log warnings and set the status to INVALID_OPERAND
since these hypercalls aren't supported. The proper handling will be
implemented later.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Since the object returned from CpuManager.create_vcpu() is never used,
we can avoid the cloning of this object.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By having the DeviceNode storing a PciBdf, we simplify the internal code
as well as allow for custom Serialize/Deserialize implementation for the
PciBdf structure. These custom implementations let us display the PCI
s/b/d/f in a human readable format.
Fixes#3711
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
As we've added support for cold adding devices to a VM that was created
but not already started, we should propagate the `204` response
generated on those cases to the yaml file, so openapi-generator can
produce the correct client code on the go side, to handle both `200` and
`204` successful results.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Instead of erroring out when trying to change the configuration of the
VM somewhere between the VM was created but not yet booted, let's allow
users to change that without any issue, as long as the VM has already
been created.
Fixes: #3639
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add very basic unit for the vm_add_$device() functions, so we can
easily expand those when changing its behaviour in the coming commits.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Instead of doing the validation of the configuration change as part of
the vm, let's do this in the uper layer, in the Vmm.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's move add_to_config to config.rs so it can be used from both inside
and outside of the vm.rs file.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
TDx support is already present on the project for quite some time, but
the TDx configuration was not yet exposed to the ones using CH via the
OpenAPI auto generated code.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Since the devices behind the IOMMU cannot be changed at runtime we offer
the ability to place all devices on user chosen segments behind the
IOMMU. This allows the hotplugging of devices behind the IOMMU provided
that they are assigned to a segment that is located behind the iommu.
Fixes: #911
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Adding a new parameter free_page_reporting=on|off to the balloon device
so that we can enable the corresponding feature from virtio-balloon.
Running a VM with a balloon device where this feature is enabled allows
the guest to report pages that are free from guest's perspective. This
information is used by the VMM to release the corresponding pages on the
host.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to allow for human readable output for the VM configuration, we
pull it out of the snapshot, which becomes effectively the list of
states from the VM. The configuration is stored through a dedicated file
in JSON format (not including any binary output).
Having the ability to read and modify the VM configuration manually
between the snapshot and restore phases makes debugging easier, as well
as empowers users for extending the use cases relying on the
snapshot/restore feature.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
As per this kernel documentation:
For KVM_EXIT_IO, KVM_EXIT_MMIO, KVM_EXIT_OSI, KVM_EXIT_PAPR, KVM_EXIT_XEN,
KVM_EXIT_EPR, KVM_EXIT_X86_RDMSR and KVM_EXIT_X86_WRMSR the corresponding
operations are complete (and guest state is consistent) only after userspace
has re-entered the kernel with KVM_RUN. The kernel side will first finish
incomplete operations and then check for pending signals.
The pending state of the operation is not preserved in state which is
visible to userspace, thus userspace should ensure that the operation is
completed before performing a live migration. Userspace can re-enter the
guest with an unmasked signal pending or with the immediate_exit field set
to complete pending operations without allowing any further instructions
to be executed.
Since we capture the state as part of the pause and override it as part
of the resume we must ensure the state is consistent otherwise we will
lose the results of the MMIO or PIO operation that caused the exit from
which we paused.
Fixes: #3658
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
If a payload is found in the TDVF section, and after it's been copied to
the guest memory, make sure to create the corresponding TdPayload
structure and insert it through the HOB.
Signed-off-by: Jiaqi Gao <jiaqi.gao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In case of TDX, if a kernel and/or a command line are provided by the
user, they can't be treated the same way as for the non-TDX case. That
is why this patch ensures the function load_kernel() is only invoked for
the non-TDX case.
For the TDX case, whenever TDVF contains a Payload and/or PayloadParam
sections, the file provided through --kernel and the parameters provided
through --cmdline are copied at the locations specified by each TDVF
section.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The TDVF specification has been updated with the ability to provide a
specific payload, which means we will be able to achieve direct kernel
boot.
For that reason, let's not prevent the user from using --kernel
parameter when running with TDX.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Make sure Cloud Hypervisor relies on upstream and actively maintained
vfio-ioctls crate from the rust-vmm/vfio repository instead of the
deprecated version coming from rust-vmm/vfio-ioctls repository.
Fixes#3673
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that we introduced a separate method to indicate when the migration
is started, both start_dirty_log() and stop_dirty_log() don't have to
carry an implicit meaning as they can focus entirely on the dirty log
being started or stopped.
For that reason, we can now safely move stop_dirty_log() to the code
section performing non-local migration. It makes only sense to stop
logging dirty pages if this has been started before.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to clearly decouple when the migration is started compared to
when the dirty logging is started, we introduce a new method to the
Migratable trait. This clarifies the semantics as we don't end up using
start_dirty_log() for identifying when the migration has been started.
And similarly, we rely on the already existing complete_migration()
method to know when the migration has been ended.
A bug was reported when running a local migration with a vhost-user-net
device in server mode. The reason was because the migration_started
variable was never set to "true", since the start_dirty_log() function
was never invoked.
Signed-off-by: lizhaoxin1 <Lxiaoyouling@163.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
While cloud-hypervisor does support receiving the file descriptors of a
tuntap device, advertising the fds structure via the openAPI can lead to
misinterpretations of what can and what should be done.
An unadvertised consumer will think that they could rather just set the
file descriptors there directly, or even pass them as a byte array.
However, the proper way to go in those cases would be actually sending
those via send_msg(), together with the request.
As hacking the openAPI auto-generated code to properly do this is not
*that* trivial, and as doing so during a `create VM` request is not
supported, we better not advertising those.
Please, for more details, also check:
https://github.com/cloud-hypervisor/cloud-hypervisor/pull/3607#issuecomment-1020935523
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Now that all the preliminary work has been merged to make Cloud
Hypervisor work with the upstream crate virtio-queue from
rust-vmm/vm-virtio repository, we can move the whole codebase and remove
the local copy of the virtio-queue crate.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the latest code from the micro-http crate, this patch adds the
support for multiple file descriptors to be sent along with the add-net
request. This means we can now hotplug multiqueue network interface to
the VM.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Moving the whole codebase to rely on the AccessPlatform definition from
vm-virtio so that we can fully remove it from virtio-queue crate.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
If a PMU is enabled in a VM, we also need to initialize the PMU
when the VM is restored. Otherwise, vCPUs cannot be started after
the VM is restored.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
When enable PMU on arm64, ioctl with group KVM_HAS_DEVICE_ATTR will be
blocked by seccomp, add it to authorized list.
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Relying on helpers for creating the ACPI tables and to add each table to
the HOB, this patch connects the dot to provide the set of ACPI tables
to the TD firmware.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The way to create ACPI tables for TDX is different as each table must be
passed through the HOB. This means the XSDT table is not required since
the firmware will take care of creating it. Same for RSDP, this is
firmware responsibility to provide it to the guest.
That's why this patch creates a TDX dedicated function, returning a list
of Sdt objects, which will let the calling code copy the content of each
table through the HOB.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In case of TDX, we don't want to create the ACPI tables the same way we
do for all the other use cases. That's because the ACPI tables don't
need to be written to guest memory at a specific address, instead they
are passed directly through the HOB.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
It's been decided the ACPI tables will be passed to the firmware in a
different way, rather than using TD_VMM_DATA. Since TD_VMM_DATA was
introduced for this purpose, there's no reason to keep it in our
codebase.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This table is listed as required in the ARM Base Boot Requirements
document. The particular need arises to make the serial debugging of
Windows guest functional.
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
Ensure all pending virtio activations (as triggered by MMIO write on the
vCPU threads leading to a barrier wait) are completed before pausing the
vCPUs as otherwise there will a deadlock with the VMM waiting for the
vCPU to acknowledge it's pause and the vCPU waiting for the VMM to
activate the device and release the barrier.
Fixes: #3585
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
These are the leftovers from the commit 8155be2:
arch: aarch64: vm_memory is not required when configuring vcpu
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
When in local migration mode send the FDs for the guest memory over the
socket along with the slot that the FD is associated with. This removes
the requirement for copying the guest RAM and gives significantly faster
live migration performance (of the order of 3s to 60ms).
Fixes: #3566
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Create the VM using the FDs (wrapped in Files) that have been received
during the migration process.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
If this FD (wrapped in a File) is supplied when the RAM region is being
created use that over creating a new one.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This function is used to open an FD (wrapped in a File) that points to
guest memory from memfd_create() or backed on the filesystem.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Drop the unused parameter throughout the code base.
Also take the chance to drop a needless clone.
No functional change intended.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
We've been currently using "fd" as the field name, but it should be
called "fds" since 6664e5a6e7 introduced
the name change on the structure field.
Fixes: #3560
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
`tap` has its default value set to `None`, but in the openapi yaml file
we've been setting it to `""`.
When using this code on the Kata Containers side we'd be hit by a non
expected behaviour of cloud-hypervisor, as even when using a different
method to initialise the `tuntap` device the code would be treated as if
using `--net tap` (which is a valid use-case).
Related: #3554
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
warning: unnecessary use of `to_string`
--> vmm/src/config.rs:2199:38
|
2199 | ... .get(&memory_zone.to_string())
| ^^^^^^^^^^^^^^^^^^^^^^^^ help: use: `memory_zone`
|
= note: `#[warn(clippy::unnecessary_to_owned)]` on by default
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_to_owned
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
warning: unneeded late initalization
--> vmm/src/acpi.rs:525:5
|
525 | let mut prev_tbl_len: u64;
| ^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: `#[warn(clippy::needless_late_init)]` on by default
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_late_init
help: declare `prev_tbl_len` here
|
552 | let mut prev_tbl_len: u64 = madt.len() as u64;
| ~~~~~~~~~~~~~~~~~~~~~~~~~
warning: unneeded late initalization
--> vmm/src/acpi.rs:526:5
|
526 | let mut prev_tbl_off: GuestAddress;
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_late_init
help: declare `prev_tbl_off` here
|
553 | let mut prev_tbl_off: GuestAddress = madt_offset;
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This crate was used in the integration tests to allow the tests to
continue and clean up after a failure. This isn't necessary in the unit
tests and adds a large build dependency chain including an unmaintained
crate.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
If the underlying kernel is old PTY resize is disabled and this is
represented by the use of None in the provided Option<File> type. In the
virtio-console PTY path don't blindly unwrap() the value that will be
preserved across a reboot.
Fixes: #3496
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
It's important to maintain the ability to run in a non-TDX environment
a Cloud Hypervisor binary with the 'tdx' feature enabled.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Setting up the SIGWINCH handler requires at least Linux 5.7. However
this functionality is not required for basic PTY operation.
Fixes: #3456
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Advertise the PCI MMIO config spaces here so that the MMIO config space
is correctly recognised.
Tested by: --platform num_pci_segments=1 or 16 hotplug NVMe vfio-user device
works correctly with hypervisor-fw & OVMF and direct kernel boot.
Fixes: #3432
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When restoring replace the internal value of the device tree rather than
replacing the Arc<Mutex<DeviceTree>> itself. This is fixes an issue
where the AddressManager has a copy of the the original
Arc<Mutex<DeviceTree>> from when the DeviceManager was created. The
original restore path only replaced the DeviceManager's version of the
Arc<Mutex<DeviceTree>>. Instead replace the contents of the
Arc<Mutex<DeviceTree>> so all users see the updated version.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Saving the KVM clock and restoring it is key for correct behaviour of
the VM when doing snapshot/restore or live migration. The clock is
restored to the KVM state as part of the Vm::resume() method prior to
that it must be extracted from the state object and stored for later use
by this method. This change simplifies the extraction and storage part
so that it is done in the same way for both snapshot/restore and live
migration.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The constant `PCI_MMIO_CONFIG_SIZE` defined in `vmm/pci_segment.rs`
describes the MMIO configuation size for each PCI segment. However,
this name conflicts with the `PCI_MMCONFIG_SIZE` defined in `layout.rs`
in the `arch` crate, which describes the memory size of the PCI MMIO
configuration region.
Therefore, this commit renames the `PCI_MMIO_CONFIG_SIZE` to
`PCI_MMIO_CONFIG_SIZE_PER_SEGMENT` and moves this constant from `vmm`
crate to `arch` crate.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Currently, a tuple containing PCI space start address and PCI space
size is used to pass the PCI space information to the FDT creator.
In order to support the multiple PCI segment for FDT, more information
such as the PCI segment ID should be passed to the FDT creator. If we
still use a tuple to store these information, the code flexibility and
readablity will be harmed.
To address this issue, this commit replaces the tuple containing the
PCI space information to a structure `PciSpaceInfo` and uses a vector
of `PciSpaceInfo` to store PCI space information for each segment, so
that multiple PCI segment information can be passed to the FDT together.
Note that the scope of this commit will only contain the refactor of
original code, the actual multiple PCI segments support will be in
following series, and for now `--platform num_pci_segments` should only
be 1.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
In order to avoid the identity map region to conflict with a possible
firmware being placed in the last 4MiB of the 4GiB range, we must set
the address to a chosen location. And it makes the most sense to have
this region placed right after the TSS region.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Place the 3 page TSS at an explicit location in the 32-bit address space
to avoid conflicting with the loaded raw firmware.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Added fields:
- `Memory address size limit`: the missing of this field triggered
warnings in guest kernel
- `Node ID`
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
After introducing multiple PCI segments, the `devid` value in
`kvm_irq_routing_entry` exceeds the maximum supported range on AArch64.
This commit restructed the `devid` to the allowed range.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
If the provided binary isn't an ELF binary assume that it is a firmware
to be loaded in directly. In this case we shouldn't program any of the
registers as KVM starts in that state.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
That function call can return -1 when it fails. Wrapping -1 into File
causes the code to panic when the File is dropped.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
I encountered some trouble trying to use a virtio-console hooked up to
a PTY. Reading from the PTY would produce stuff like this
"\n\nsh-5.1# \n\nsh-5.1# " (where I'm just pressing enter at a shell
prompt), and a terminal would render that like this:
----------------------------------------------------------------
sh-5.1#
sh-5.1#
----------------------------------------------------------------
This was because we weren't disabling the ICRNL termios iflag, which
turns carriage returns (\r) into line feeds (\n). Other raw mode
implementations (like QEMU's) set this flag, and don't have this
problem.
Instead of fixing our raw mode implementation to just disable ICRNL,
or copy the flags from QEMU's, though, here I've changed it to use the
raw mode implementation in libc. It seems to work correctly in my
testing, and means we don't have to worry about what exactly raw mode
looks like under the hood any more.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Fix seccomp violation when trying to add the out FD to the epoll loop
when the serial buffer needs to be flushed.
0x00007ffff7dc093e in epoll_ctl () at ../sysdeps/unix/syscall-template.S:120
0x0000555555db9b6d in epoll::ctl (epfd=56, op=epoll::ControlOptions::EPOLL_CTL_MOD, fd=55, event=...)
at /home/rob/.cargo/registry/src/github.com-1ecc6299db9ec823/epoll-4.3.1/src/lib.rs:155
0x00005555556f5127 in vmm::serial_buffer::SerialBuffer::add_out_poll (self=0x7fffe800b5d0) at vmm/src/serial_buffer.rs:101
0x00005555556f583d in vmm::serial_buffer::{impl#1}::write (self=0x7fffe800b5d0, buf=...) at vmm/src/serial_buffer.rs:139
0x0000555555a30b10 in std::io::Write::write_all<vmm::serial_buffer::SerialBuffer> (self=0x7fffe800b5d0, buf=...)
at /rustc/59eed8a2aac0230a8b53e89d4e99d55912ba6b35/library/std/src/io/mod.rs:1527
0x0000555555ab82fb in devices::legacy::serial::Serial::handle_write (self=0x7fffe800b520, offset=0, v=13) at devices/src/legacy/serial.rs:217
0x0000555555ab897f in devices::legacy::serial::{impl#2}::write (self=0x7fffe800b520, _base=1016, offset=0, data=...) at devices/src/legacy/serial.rs:295
0x0000555555f30e95 in vm_device:🚌:Bus::write (self=0x7fffe8006ce0, addr=1016, data=...) at vm-device/src/bus.rs:235
0x00005555559406d4 in vmm::vm::{impl#4}::pio_write (self=0x7fffe8009640, port=1016, data=...) at vmm/src/vm.rs:459
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When running with `--serial pty --console pty --seccomp=false` the
SIGWICH listener thread would panic as the seccomp filter was empty.
Adopt the mechanism used in the rest of the code and check for non-empty
filter before trying to apply it.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
With the introduction of a new option `affinity` to the `cpus`
parameter, Cloud Hypervisor can now let the user choose the set
of host CPUs where to run each vCPU.
This is useful when trying to achieve CPU pinning, as well as making
sure the VM runs on a specific NUMA node.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Give the option parser the ability to handle tuples with inner brackets
containing list of integers. The following example can now be handled
correctly "option=[key@[v1-v2,v3,v4]]" which means the option is
assigned a tuple with a key associated with a list of integers between
the range v1 - v2, as well as v3 and v4.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Because anyhow version 1.0.46 has been yanked, let's move back to the
previous version 1.0.45.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Always properly initialize vectors so that we don't run in undefined
behaviors when the vector gets dropped.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Creates a new generic type Tuple so that the same implementation of
FromStr trait can be reused for both parsing a list of two integers and
parsing a list of one integer associated with a list of integers.
This anticipates the need for retrieving sublists, which will be needed
when trying to describe the host CPU affinity for every vCPU.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The elements of a list should be using commas as the correct delimiter
now that it is supported. Deprecate use of colons as delimiter.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This allocator allocates 64-bit MMIO addresses for use with platform
devices e.g. ACPI control devices and ensures there is no overlap with
PCI address space ranges which can cause issues with PCI device
remapping.
Use this allocator the ACPI platform devices.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rather than use the system MMIO allocator for RAM use an allocator that
covers the full RAM range.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This is because the SGX region will be placed between the end of ram and
the start of the device area.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
With the segment id now encoded in the bdf it is not necessary to have
the separate field for it.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In particular use the accessor for getting the device id from the bdf.
As a side effect the VIOT table is now segment aware.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Since each segment must have a non-overlapping memory range associated
with it the device memory must be equally divided amongst all segments.
A new allocator is used for each segment to ensure that BARs are
allocated from the correct address ranges. This requires changes to
PciDevice::allocate/free_bars to take that allocator and when
reallocating BARs the correct allocator must be identified from the
ranges.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
For all the devices that support being hotplugged (disk, net, pmem, fs
and vsock) add "pci_segment" option and propagate that through to the
addition onto the PCI busses.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Move the decision on whether to use a 64-bit bar up to the DeviceManager
so that it can use both the device type (e.g. block) and the PCI segment
ID to decide what size bar should be used.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Generate a set of 8 IRQs and round-robin distribute those over all the
slots for a bus. This same set of IRQs is then used for all PCI
segments.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The platform config may specify a number of PCI segments to use, if this
greater than 1 then we add supplemental PCI segments as well as the
default segment.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This currently contains only the number over PCI segments to create.
This is limited to 16 at the moment which should allow 496 user specified
PCI devices.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
For the bus scanning the GED AML code now calls into a PSCN method that
scans all buses. This approach was chosen since it handles the case
correctly where one GED interrupt is services for two hotplugs on
distinct segments.
The PCIU and PCID field values are now determined by the PSEG field that
is uses to select which segment those values should be used for.
Similarly _EJ0 will notify based on the value of _SEG.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Replace the hardcoded zero PCI segment id when adding devices to the bus
and extend the DeviceTree to hold the PCI segment id.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Since each segment must have disjoint address spaces only advertise
address space in the 32-bit range and the PIO address space on the
default (zero) segment.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Split PciSegment::new_default_segment() into a separate
PciSegment::new() and those parts required only for the default segment
(PIO PCI config device.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
For now this still contains just one segment but is expanding in
preparation for more segments.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
