Now that the node_device driver is aware of CCW devices, let's hook up
virsh so that we can filter them properly.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Make CCW devices available to the node_device driver. The devices are
already seen by udev so let's implement necessary code for detecting
them properly.
Topologically, CCW devices are similar to PCI devices, e.g.:
+- ccw_0_0_1a2b
|
+- scsi_host0
|
+- scsi_target0_0_0
|
+- scsi_0_0_0_0
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
QEMU will likely report the details of it shutting down, particularly
whether the shutdown was initiated by the guest or host. We should
forward that information along, at least for shutdown events. Reset
has that as well, however that is not a lifecycle event and would add
extra constants that might not be used. It can be added later on.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1384007
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1374126
Due to how the processing for authentication using polkit works, the
virshConnect code must first "attempt" an virConnectOpenAuth and then
check for a "special" return error code VIR_ERR_AUTH_UNAVAILABLE in
order to attempt to "retry" the authentication after performing a creation
of a pkttyagent to handle the challenge/response for the client.
However, if pkttyagent creation is not possible for the authentication
being attempted (such as perhaps a "qemu+ssh://someuser@localhost/system"),
then the same failure pattern would be returned and another attempt to
create a pkttyagent would be done. This would continue "forever" until
someone forced quit (e.g. ctrl-c) from virsh as the 'authfail' was not
incremented when creating the pkttyagent.
So add a 'agentCreated' boolean to track if we've attempted to create the
agent at least once and force a failure if that creation returned the same
error pattern.
This resolves a possible never ending loop and will generate an error:
error: failed to connect to the hypervisor
error: authentication unavailable: no polkit agent available to authenticate action 'org.libvirt.unix.manage'
NB: If the authentication was for a sufficiently privileged client, such as
qemu+ssh://root@localhost/system, then the remoteDispatchAuthList "allows"
the authentication to use libvirt since @callerUid would be 0.
The reason for introducing two capabilities, one for the device itself
(cap 'mdev') and one for the parent device listing the available types
('mdev_types'), is that we should be able to do
'virsh nodedev-list --cap' not only for existing mdev devices but also
for devices that support creation of mdev devices, since one day libvirt
might be actually able to create the mdev devices in an automated way
(just like we do for NPIV/vHBA).
https://bugzilla.redhat.com/show_bug.cgi?id=1452072
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Similarly to previous commit, implement sparse streams feature
for vol-upload. This is, however, slightly different approach,
because we must implement a function that will tell us whether
we are in a data section or in a hole. But there's no magic
hidden in here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add a new --sparse switch that does nothing more than
enables the sparse streams feature for this command. Among with
the switch new helper function is introduced: virshStreamSkip().
This is the callback that is called whenever daemon sends us a
hole. In the callback we reflect the hole in underlying file by
seeking as many bytes as told.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Ideally, this would be generated, but to achieve that
corresponding XDR definitions needed to go into a different .x
file. But they belong just to the one that they are right now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virt-install and virt-manager both default to explicitly setting
"io='native'" in the disk "driver" tag. virsh, however, does not and also
does not provide an option to specify that setting at all. As a result,
disks use a different IO mechanism (the default, "threads") when attached
post-setup using virsh. Adding this option allows users to keep disk
performance consistent for disks attached at install, and those attached
afterward.
https://bugzilla.redhat.com/show_bug.cgi?id=1330940
The virsh command 'domblkinfo' returns the capacity, allocation and phisycal
size of the devices attached in a domain. Usually, this sizes are very big
and hard to understand and calculate. This commits introduce a human readable
support to check the size of each field easilly.
For example, the command before:
virsh # domblkinfo my_domain hda
Capacity: 21474836480
Allocation: 14875545600
Physical: 21474836480
and after this patch:
virsh # domblkinfo my_domain hda --human
Capacity: 20.000G
Allocation: 13.900G
Physical: 20.000G
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The parameter is reported by virDomainGetJobStats API and
VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event and it can be used to identify
the operation (migration, snapshot, ...) to which the reported
statistics belong.
https://bugzilla.redhat.com/show_bug.cgi?id=1441563
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
There are several functions in virshInit which can fail, especially
when running win32 builds under WINE. Currently virsh just exits
without reporting what error happened.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In virsh we quite often get the domain XML just to initialize the XPath
parser so that we can extract information.
Add helpers which will simplify this by wrapping the getting of the XML
and parsing it along with error reporting.
Additionally a second helper also gets the domain object from the
parameters and releases it so that functions which need the XML as only
source of data can be simplified further.
Avoid the annoying issue where the public object freeing APIs overwrite
the error set by helper functions, since they don't invoke the callback.
The new helper remembers the error only if no previous error was set.
virDomainFree has it's quirks (does not like NULL pointers, resets
libvirt errors). Replace it by a virsh helper which will allow us to
centrally fix issues with it.
The syntax-check rule will prohibit new uses of virDomainFree.
Move virshLookupDomainBy, virshCommandOptDomainBy and
virshCommandOptDomainBy to the helper file. Additionally turn the
virshCommandOptDomainBy macro into a function.
==18591== 16 bytes in 1 blocks are definitely lost in loss record 41 of 183
==18591== at 0x4C2B934: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==18591== by 0x54EBB1C: virAllocN (viralloc.c:191)
==18591== by 0x1628CA: _vshMalloc (vsh.c:136)
==18591== by 0x1344C4: virshVcpuPinQuery (virsh-domain.c:6603)
==18591== by 0x1344C4: cmdVcpuPin (virsh-domain.c:6707)
==18591== by 0x1631BF: vshCommandRun (vsh.c:1312)
==18591== by 0x12DBB1: main (virsh.c:961)
Introduce STRICT_FRAME_LIMIT_CFLAGS that will be used for
production code and RELAXED_FRAME_LIMIT_CFLAGS for tests.
Raising the limit for tests allows building them with clang
with optimizations disabled.
qemu requires that the topology equals to the maximum vcpu count.
Document this along with the API to set maximum vcpu count and the XML
element.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1426220
https://bugzilla.redhat.com/show_bug.cgi?id=1398087
Clean up the virsh man page description for --pool-create-as in order
to better describe how the various arguments are used when creating
(or defining) a logical pool.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1398087
Clean up the virsh man page description for --pool-create-as in order
to better describe how the various arguments are used when creating
(or defining) a logical pool.
Also modify the storage pool XML parsing algorithm to check for the
mismatched "name" and "source-name".
Move the --print-xml to the end of the qualifiers since it's not
properly positionally situated for both --pool-create-as and --pool-define-as
and could be miscontrued as being the 3rd positional argument.
Management tools may want to check whether the threshold is still set if
they missed an event. Add the data to the bulk stats API where they can
also query the current backing size at the same time.
When using thin provisioning, management tools need to resize the disk
in certain cases. To avoid having them to poll disk usage introduce an
event which will be fired when a given offset of the storage is written
by the hypervisor. Together with the API which will be added later, it
will allow registering thresholds for given storage backing volumes and
this event will then notify management if the threshold is exceeded.
Add bhyve support to virt-host-validate(1). It checks for the
essential kernel modules to be available so that user can actually
start VMs, have networking and console access.
It uses the kldnext(2)/kldstat(2) routines to retrieve modules list.
As bhyve is only available on FreeBSD and these routines were available
long before bhyve appeared, not adding any specific configure checks
for that.
Also, update tools/Makefile.am to add
virt-host-validate-$driver.[hc] to the build only if the
appropriate driver is enabled.
In GCC 7 there is a new warning triggered when a switch
case has a conditional statement (eg if ... else...) and
some of the code paths fallthrough to the next switch
statement. e.g.
conf/domain_conf.c: In function 'virDomainChrEquals':
conf/domain_conf.c:14926:12: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (src->targetTypeAttr != tgt->targetTypeAttr)
^
conf/domain_conf.c:14928:5: note: here
case VIR_DOMAIN_CHR_DEVICE_TYPE_CONSOLE:
^~~~
conf/domain_conf.c: In function 'virDomainChrDefFormat':
conf/domain_conf.c:22143:12: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (def->targetTypeAttr) {
^
conf/domain_conf.c:22151:5: note: here
default:
^~~~~~~
GCC introduced a __attribute__((fallthrough)) to let you
indicate that this is intentionale behaviour rather than
a bug.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Alter the formatting of each line to not give the appearance of
one long run-on sentence and to be consistent between the various
elements of collected/displayed data. The formatting should fit
within the 80 character display. This removes the need for commas
at the end of each line.
After 7f1bdec5fa our nodedev driver is capable of
determining DRM devices (DRM stands for Direct Render Manager not
Digital rights management). There is still one bit missing
though: virConnectListAllNodeDevices() is capable of listing
either all devices or just those with specified capability. Well,
DRM capability is missing there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
All options started with underscores, but we switched them to dashes
later on, making the style consistent. The latest addition, however,
did not respect that, so let's change that as well. It is tempting to
just change the name instead of adding alias, especially since nobody
ever used it, which we know thanks to the fact that it didn't work.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Function vshCommandOptStringReq() returns -1 on error and 0 on
success. The code, however, used the 'group_name' variable only if it
returned 1 (never).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
As LIBVIRT_DEBUG=4 logs only error messages and there
are no levels above it, adjusting the description in
the man page accordingly.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
This commit is similar to commit 0977ada8.The virsh manpage
lists options --uuid and --name as mutually exclusive if
option --details is specified when actually the option
--details is mutually exclusive and can't go with options
--uuid and/or --name. This patch rewords the virsh manpage
to state the correct meaning.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
Added general definitions for vstorage pool backend including
the build options to add --with-storage-vstorage checking.
In order to use vstorage as a backend for a storage pool
vstorage tools (vstorage and vstorage-mount) need to be installed.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
The recent deprecation in glibc (commit b76e065991ec) means the
module will fail to build entirely:
nss/libvirt_nss.c: In function '_nss_libvirt_gethostbyname_r':
nss/libvirt_nss.c:363:13: error: RES_USE_INET6 is deprecated [-Werror]
int af = ((_res.options & RES_USE_INET6) ? AF_INET6 : AF_INET);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This resolver option was removed shortly after being introduced,
and application using it are already broken anyway.
This patch will allow --uuid and --name in one cmd.
The pool's UUID and name will be printed side by side.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
By default, pool-info will convert sizes to human friendly units.
This patch will introduce option [--bytes].
If specified, the raw sizes will be in the output.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1373711
Add support and documentation for the [NO_]OVERWRITE flags for the
logical backend.
Update virsh.pod with a description of the process for usage of
the flags and building of the pool's volume group.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than have the Disk code having to use PARTED to determine if
there's something on the device, let's use the virStorageBackendDeviceProbe.
and only fallback to the PARTED probing if the BLKID code isn't built in.
This will also provide a mechanism for the other current caller (File
System Backend) to utilize a PARTED parsing algorithm in the event that
BLKID isn't built in to at least see if *something* exists on the disk
before blindly trying to use. The PARTED error checking will not find
file system types, but if there is a partition table set on the device,
it will at least cause a failure.
Move virStorageBackendDiskValidLabel and virStorageBackendDiskFindLabel
to storage_backend and rename/rework the code to fit the new model.
Update the virsh.pod description to provide a more generic description
of the process since we could now use either blkid or parted to find
data on the target device.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1363586
Commit id '27758859' introduced the "NO_OVERWRITE" flag check for
file system backends; however, the implementation, documentation,
and algorithm was inconsistent. For the "flag" description for the
API the flag was described as "Do not overwrite existing pool";
however, within the storage backend code the flag is described
as "it probes to determine if filesystem already exists on the
target device, renurning an error if exists".
The code itself was implemented using the paradigm to set up the
superblock probe by creating a filter that would cause the code
to only search for the provided format type. If that type wasn't
found, then the algorithm would return success allowing the caller
to format the device. If the format type already existed on the
device, then the code would fail indicating that the a filesystem
of the same type existed on the device.
The result is that if someone had a file system of one type on the
device, it was possible to overwrite it if a different format type
was specified in updated XML effectively trashing whatever was on
the device already.
This patch alters what NO_OVERWRITE does for a file system backend
to be more realistic and consistent with what should be expected when
the caller requests to not overwrite the data on the disk.
Rather than filter results based on the expected format type, the
code will allow success/failure be determined solely on whether the
blkid_do_probe calls finds some known format on the device. This
adjustment also allows removal of the virStoragePoolProbeResult
enum that was under utilized.
If it does find a formatted file system different errors will be
generated indicating a file system of a specific type already exists
or a file system of some other type already exists.
In the original virsh support commit id 'ddcd5674', the description
for '--no-overwrite' within the 'pool-build' command help output
has an ambiguous "of this type" included in the short description.
Compared to the longer description within the "Build a given pool."
section of the virsh.pod file it's more apparent that the meaning
of this flag would cause failure if a probe of the target already
has a filesystem.
So this patch also modifies the short description to just be the
antecedent of the 'overwrite' flag, which matches the API description.
This patch also modifies the grammar in virsh.pod for no-overwrite
as well as reworking the paragraph formats to make it easier to read.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The virsh manpage lists "shutdown" and "dying" as two of the possible
domain states that could be listed in the output of the "virsh list"
command. However, a domain that is being shutdown will be listed as
"in shutdown", and the "dying" state doesn't even exist (and never
has, as far as I can tell from looking through git history - it was
shown in the original import of the virsh.pod file in 2006; there was
no VIR_DOMAIN_DYING state then, there wasn't one when those lines of
virsh.pod were tweaked in 2008, and there still isn't one
today. Apparently it was just something that sounded like a good idea
to someone at some time, but was never implemented...)
Resolves: https://bugzilla.redhat.com/1408778
This patch adds support and documentation for
a generalized hardware cache event called cache_l1d
perf event.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
The virsh manpage lists options --uuid and --name as
mutually exclusive along option --table when actually
the option --table is mutually exclusive and can't go
with options --uuid and/or --name. This patch rewords the
virsh manpage to state the correct meaning.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
When setting perf events, the enabled/disabled perf events are not
listed. Since we know which events were changed it's possible to
print out the values on successful set, such as :
virsh perf Domain --enable instructions --disable cache_misses
instructions : enabled
cache_misses : disabled
Created a helper to print the messages - use the vshPrintExtra to
adhere to the --quiet|-q option being set by some script. This will
cause the get code to print nothing, but will return success/failure.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
When changing the metadata via virDomainSetMetadata, we now
emit an event to notify the app of changes. This is useful
when co-ordinating different applications read/write of
custom metadata.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new qualifier '--physical' to the 'vol-info' command in order to
dispaly the physical size of the volume. The size can differ from the
allocation value depending on the volume file time. In particular, qcow2
volumes will have a physical value larger than allocation. This also occurs
for sparse files, although for those the capacity is the largest size;
whereas, for qcow2 capacity is the logical size.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Finally, now that all APIs have been introduced, wire them up to virt-admin
and introduce daemon-log-outputs and daemon-log-filters commands.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
1ec22be5 added code that detects the maximum cpu count according to
domain capabilities. The code fell back to the old command only if the
API was not supported. If the API fails for other reasons the command
would fail. There's no point in not trying the old API in such case.
https://bugzilla.redhat.com/show_bug.cgi?id=1402690
Some arguments in vshErrorHandler, vshReadlineCompletion and
cmdSelfTest functions are not used. Mark them as such.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If the 'nleases < 0' on return, then the subsequent call to
findLeaseInJSON will not produce the expected results (passed
in as a size_t, but nleases is a ssize_t). So check if the
returned value < 0 and if so, goto cleanup.
Found by Coverity as a NEGATIVE_RETURNS event
With current perf framework, this patch adds support and documentation
for the branch_instructions perf event.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
So far the NSS module looks up only hostnames as provided by
guests themselves. However, there are some cases where this is
not enough: e.g. when there's a fresh new guest being installed
(with some generic hostname) say from a live ISO image; or some
(older) systems don't advertise their hostname in DHCP
transactions at all.
In cases like that it would be helpful if we translate domain
name as seen by libvirt too so that users can:
# virsh start $dom && ssh $dom
In order to achieve that new libvirt-guest module is introduced,
while older libvirt module maintains its current behaviour (that
is translating guest provided names into IP addresses).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The part of the code that iterates over an array of JSON values
is going to be re-used. Instead of copying it over, move it to a
separate function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The part of the code that appends found IP address into a list is
going to be re-used. Instead of copying it over, move it to a
separate function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The name of the exported functions for an NSS module is quite
fixed, it is derived from the module name:
_nss_$module_$function
Since we will create another NSS module with very similar
implementation we might as well generate the function names at
the compile time.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have couple of functions that operate over NULL terminated
lits of strings. However, our naming sucks:
virStringJoin
virStringFreeList
virStringFreeListCount
virStringArrayHasString
virStringGetFirstWithPrefix
We can do better:
virStringListJoin
virStringListFree
virStringListFreeCount
virStringListHasString
virStringListGetFirstWithPrefix
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It is already discussed in "[RFC] daemon: remove hardcode dep on libvirt-guests" [1].
Mgmt can use means to save/restore domains on system shutdown/boot other than
libvirt-guests.service. Thus we need to specify appropriate ordering dependency between
libvirtd, domains and save/restore service. This patch takes approach suggested
in RFC and introduces a systemd target, so that ordering can be built next way:
libvirtd -> domain -> virt-guest-shutdown.target -> save-restore.service.
This way domains are decoupled from specific shutdown service via intermediate
target.
[1] https://www.redhat.com/archives/libvir-list/2016-September/msg01353.html
Commit v1.3.3-181-gb028e9d7c implmented support for
VIR_MIGRATE_PARAM_PERSIST_XML migration parameter, but forgot to update
virsh.
https://bugzilla.redhat.com/show_bug.cgi?id=835300
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Although there already was an effort (b620bdee) to replace vshPrint occurrences
with vshPrintExtra due to '--quiet' flag, there were still some leftovers. So
this patch fixes them, hopefully for good.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1356881
Signed-off-by: Erik Skultety <eskultet@redhat.com>
There were a few places in our virsh* code where instead of calling vshError
on failure we called vshPrint.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
First, since commit 834c5720 the error reporting within the vshErrorHandler
doesn't work because there was a lot of renaming going on (dull mechanical
renaming without much thinking about it, yep - shame on me) and so the original
env variable VIRSH_DEBUG got renamed to VSH_DEBUG which we don't support nor
document anywhere. Second, by specifying this env variable, the last libvirt
error gets reported twice despite the fact we say the error reporting should be
deferred until the command finishes, and last but not least the vintage code's
logic is a bit 'odd', since the error would get reported iff the env variable
is set, even if the value should be equal to our DEFAULT value in which case it
doesn't make sense that we behave differently when an env variable is set to
some value and when there's no env variable at all but we use the same value
automatically as default.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Unlike the other error messages in vshInitDebug, this one relied on a hardcoded
name of a variable instead of using the prefix of the tool calling the init
routine.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1393854
Signed-off-by: Erik Skultety <eskultet@redhat.com>
After 06a7b1ff4 the @&opts_need_arg is not used anywhere. Well,
it is set but never read:
vsh.c: In function 'vshReadlineParse':
vsh.c:2658:14: warning: variable 'opts_need_arg' set but not used [-Wunused-but-set-variable]
uint64_t opts_need_arg, opts_seen;
^~~~~~~~~~~~~
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit id 'dcfdf341' passes 'opts_need_arg' and 'opts_seen' to
vshCmddefGetData, but that seems to be incorrect as those values
are not initialized properly (something at least one compiler found).
Instead the static 'const_opts_need_arg' and 'const_opts_seen' values
should be passed.
By passing unitialized values leads to not finding possible options
for simpler commands (domfsfreeze for example), where if you're in
a virsh shell using command line completion - you'll get a list of
files in your current directory instead of two options --domain and
--mountpoint (as would happen with this patch applied.
Correcting the error reporting method by using VSH_REQUIRE_OPTION
instead of virReportError
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
The 'on_shutdown' was the name in Xen, there was never such option in
libvirt's domain XML.
Reported-by: Ruben Kerkhof <ruben@rubenkerkhof.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since we're using autoconf to substitute the right value in
Makefile.am now, we can use a less generic name without running
into circular dependencies.
Adding $(prefix) in Makefile.am, as we were doing, means that
it would be prepended even when using --with-ws-plugindir,
which is something we don't want to happen.
Instead, we add it beforehand but take care that it doesn't
get expanded until make is called.
https://bugzilla.redhat.com/show_bug.cgi?id=1349898
Add the duration parameters to the virsh input/output for blkdeviotune
command and describe them in the pod file.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rework the repetitive lines to add iotune values into easier to read macros.
One to handle the SCALED values and one to handle the non scaled values.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Added description for new vcpu.<num>.halted statistics value.
While there, also added a description for vcpu.<num>.wait and
clarified the units displayed for time and wait.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
It is stated in the manual already, so let's mention the same thing in
the description to avoid causing problems.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If the VM is offline virsh attempted to at least report the pinning
information for the VM. This would not work properly now that the vcpus
can be sparse. Fix it by getting the vcpu states from the XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1375920
The fallback code used if virDomainGetVcpusFlags is not supported used
wrong XPath queries and basically did not work at all. Fix them to point
to the <domain> <vcpu> element instead of <vcpus> which was not present
until lately.
The Requires relationship is very strong, in that it prevents
a unit from running unless all the units it Requires are
running as well.
This turns out to be a problem because we want to be able to
restart libvirtd at any time without having libvirt-guests
suspend or shutdown running guests.
Turn the Requires relationship into a Wants relationship:
this way starting libvirt-guests will cause systemd to (attempt
to) start libvirtd as well, but stopping or restarting libvirtd
will not alter libvirt-guests' running state.
1. Move the declaration of const vshCmdDef *help - it should be at the
top of the "if" rather than in the middle.
2. Change a comparison from && to || - without doing so we could crash
on commands like 'virsh list' which would allow completion of some
non -- option based on whatever was found in the current working
directory and then as soon as that was completed, the next <tab>
would crash since "opt" would be returned as NULL, but the check
was dereferencing "&& opt->type"
3. Before dereferencing opt->completer, be sure opt isn't NULL.
With newer versions of libvirt Domain-0 is again visible in the list of
running guests but it should not be considered as a guest for shutdown
or suspend.
Signed-off-by Stefan Bader <stefan.bader@canonical.com>
The list file expects all guest UUIDs on the same line as the URI
which the guests run on. This does not happen when the list is
echo'ed in quotes. When stripping the quotes, newlines get transformed
into spaces. Without this, only the first guest on the list is actually
handled.
Based on a fix by Omar Siam <simar@gmx.net>
Bug-Ubuntu: http://bugs.launchpad.net/bugs/1591695
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
For one VM, it could had more than one graphical display.
Such as we coud add both vnc and spice display to a VM.
This patch introduces '--all' for showing all
possible graphical display of a active VM.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
GCC complained that
vsh.c: In function 'vshReadlineOptionsGenerator':
vsh.c:2622:29: warning: unused variable 'opt' [-Wunused-variable]
const vshCmdOptDef *opt = &cmd->opts[list_index];
^
vsh.c: In function 'vshReadlineParse':
vsh.c:2830:44: warning: 'opt' may be used uninitialized in this function
[-Wmaybe-uninitialized]
completed_list = opt->completer(autoCompleteOpaque,
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
For compatibility reasons virDomainSetVcpus needs to add vcpus as non
hotpluggable which means that the users will not be able to unplug it
after the VM has started. Add a flag that will allow to tell the API
that the unpluggable vcpus are okay.
The NSS module shouldn't rely on custom leases database to not have
entries for leases which have expired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1379895
Introduced by commit id '834c5720'.
During the code motion and creation of vsh.c, the function 'vshDeinit()'
in the (new) vsh.c was altered from whence it came in virsh.c such that
calling 'vshReadlineDeinit(ctl)' was conditional on "ctl->imode".
This causes a problem for the interactive running if the "quit" and "exit"
commands are used because 'cmdQuit' will clear ctl->imode, thus when the
interactive loop in main() of virsh.c exits because ctl->mode is clear and
virshDeinit is called which calls vshDeinit, the history file is now not
written. Conversely, if one had exited the interactive loop via pressing
<ctrl>D the file would be created because loop control is broken on EOF
and ctl->imode is not set to false.
This patch will remove the conditional call to vshReadlineDeinit and
restore the former behaviour.
Commit 6c504d6a added a note to the virsh man page about the
deprecation of 'cap' and 'weight' settings for the credit
scheduler. To this day, the default scheduler in Xen is credit
and it supports setting 'cap' and 'weight'. Remove the deprecation
notice from the note on the Xen credit scheduler.
Reported-by: Volo M. <vm@vovs.net>
Some CPU drivers (such as arm) do not provide list of CPUs libvirt
supports and just pass any CPU model from domain XML directly to QEMU.
Such driver need to return models == NULL and success from cpuGetModels.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Change the logic in a way, so that VSH_CMD_FLAG_ALIAS behaves similarly to
how VSH_OT_ALIAS for command options, i.e. there is no need for code duplication
for the alias and the aliased command structures. Along with that change,
switch any existing VSH_CMD_FLAG_ALIAS occurrences to this new format. Also,
since this patch introduces a new command structure element, adjust the
virsh-self-test test to make sure we won't ever miss to specify the '.alias'
member for an aliased command because doing that would lead to an internal
error.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The command is deprecated due to being grammatically incorrect, but for
backwards compatibility reasons cannot be removed. However, we should not
document such commands.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Recent changes extracted the command internals validation routine from
vshCmddefOptParse method which now just calls vshCmddefOptFill. Therefore, make
vshCmddefOptFill the new vshCmddefOptParse and drop the unnecessary name.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Originally introduced by commit 2432521e which correctly split
vshCmddefOptParse into command's options validation and options parsing.
However, command's 'internals' are not tied solely to .options, rather it
should be about the overall structure, therefore the validation should be
extracted from vshCmddefOptParse and performed only within our test suite, i.e.
in vshSelfTest.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
If the initial check is true the function immediately returns so there's no
need to enclose the code following the check within an 'else' block.
Also, by removing the 'else' block, the declarations need to be moved to
beginning of the function block to conform with our guidelines.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since it's used on a single place only, it can easily be replaced by the right
side of the original assignment.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The intention is to move vshCmddefCheckInternals out of vshCmddefOptParse to
our test suite. First step to do that is to enforce checking for an existing
help string (that also means it's non-empty) in a command because a command
without a help is not much of a use.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
virsh maxvcpus --type kvm output is useless on PPC. Also, in
commit e6806d79 we documented not rely on virConnectGetMaxVcpus
output. Fix the maxvcpus to use virConnectGetDomainCapabilities
now to make it useful. The call is made to use the default emulator
binary and to check for the host machine and arch which is what the
command intends to show anyway.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Just like we are running 'virsh self-test' from within our test
suite, we should run 'virt-admin self-test' too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This command should be exposed to other shells of ours.
They are gonna need it as soon as we want to test them too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When using
virsh net-event non-existing-net
the error message says that 'either --list or event type is required'
This is misleading as 'virsh net-event $valid-event-type' is not going
to work either. What is expected is 'virsh net-event --event
$valid-event-type'
This commit fixes the string in pool-event, nodedev-event, event, and
net-event.
This patch is to delete the extra wrap "\n" after failed vol-resize
error for both "Failed to change size of volume to" and "Failed to change
size of volume by". For error with wrap, there will be an extra wrap
between two errors, such as:
(1)# virsh vol-resize --pool default --vol vol-test 5M
error: Failed to change size of volume 'vol-test' to 5M
error: invalid argument: Can't shrink capacity below current capacity unless shrink flag explicitly specified
(2)# virsh vol-resize /var/lib/libvirt/images/volds --shrink --delta 10M
error: Failed to change size of volume 'volds' by 10M
error: invalid argument: can't shrink capacity below existing allocation
Unfortunately, commit a8962f70 only fixed first half of the reported issue of
virt-admin outputting negative values where unsigned int is expected by
BZ below, so this commit represents the other missing half of the fix.
resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1356769
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This patch changes the signature of vshCompleters, allowing to pass along
some data that we might want to along with the completers; for example,
we might want to pass the autocomplete vshControl along with the
completer, in case the completer requires a connection to libvirtd.
Signed-off-by: Nishith Shah <nishithshah.2211@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Having After=libvirtd.service merely ensures that, if both
services are asked to start, libvirtd.service will start
first.
What we really want is for libvirtd.service to be started
whenever libvirt-guests.service is asked to start. Adding a
Requires= relationship guarantees that will happen.
We use a separate line for each After= relationship in other
unit files: do the same here for consistency's sake, and also
to make future changes nicer to diff
libvirt-guests.service does both suspend *and* resume guests,
depending on whether it's being started or stopped: the
description should reflect this, to avoid confusing messages
during startup.
Replace "active" with "running" (to match virsh list's output)
and don't capitalize libvirt.
Call option completers if argument completion is requested using the
corresponding option completer, if it is defined.
Signed-off-by: Nishith Shah <nishithshah.2211@gmail.com>
With current perf framework, this patch adds support and documentation
for more perf events, including cache misses, cache references, cpu cycles,
and instructions.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
When we wanted to break huge and unmaintainable virsh into
smaller files first thing we did was to just move funcs into
virsh-.c files and then #include them from virsh. Having it done
this way we also needed to have them listed under EXTRA_DIST.
However, things got changed since then and now all the virsh-*.c
files are proper source files. Therefore they are listed under
virsh_SOURCES too. But for some reason we forgot to remove them
from EXTRA_DIST.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virVcpuInfo contains the vcpu number that the data refers to. Report
what's returned by the daemon rather than the sequence number as with
sparse vcpu topologies they won't match.
Use the full versions of the message, instead of composing a base
message with what was updated; the change makes the messages properly
translatable, since different parts of a sentence might need different
declensions for example.
Turn various vshPrint() informative messages into vshPrintExtra(), so
they are not printed when requesting the quiet mode; neither XML/info
outputs nor the results of commands are affected.
Also change the expected outputs of the virsh-undefine test, since virsh
is invoked in quiet mode there.
Some informative messages might still be converted (and thus silenced
when in quiet mode), but this is an improvements nonetheless.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1358179
This event is emitted when a nodedev XML definition is updated,
like when cdrom media is changed in a cdrom block device.
Also includes node device update event implementation for udev
backend, virsh nodedev-event support, and event-test support
https://bugzilla.redhat.com/show_bug.cgi?id=1366611
When commit id 'cb2e3e50' reworked the cmdSecretGetValue call to use
VIR_DISPOSE_STRING for base64, it neglected to initialize the base64
value to NULL since the cleanup: label could be reached prior to the
base64 value being set or not. This resulted in a core dump, adding
the initialization will avoid the issue.
After commit 9d479dd1 fiddled with the cmdConnect's output which used to be a
bit more verbose prior to the mentioned commit, the program flow would result
in a quite confusing error if an invalid URI has been provided:
error: Failed to connect to the admin server
Connected to the admin server
error: <some error>
The problem is that the commit mentioned above relied on the fact that
connect routine always succeeds which is not true.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In libvirt, snapshot means disk snapshot.
snapshot --live is more like VM checkpoint.
Make it clear in virsh.pod.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In our attempts to reconnect, we may create a polkit daemon.
However, it may happen that we would rewrite the variable that
already holds pointer to the agent.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1356937
Add the definitions to allow for viewing/setting cgroup period and quota
limits for IOThreads.
This is similar to the work done for emulator quota and period by
commit ids 'b65dafa' and 'e051c482'.
Being able to view/set the IOThread specific values is related to more
recent changes adding global period (commmit id '4d92d58f') and global
quota (commit id '55ecdae') definitions and qemu support (commit id
'4e17ff79' and 'fbcbd1b2'). With a global setting though, if somehow
the IOThread value in the cgroup hierarchy was set "outside of libvirt"
to a value that is incompatible with the global value.
Allowing control over IOThread specific values provides the capability
to alter the IOThread values as necessary.
The prettified JSON string already contains a newline so don't print
another one. This allows to pipe the json output (in conjunction with
the --quiet option) to files without having to truncate them afterwards.
Commit 0c56d94318 forgot to return false in the cmdConnect command
after the clean up made there.
Before (assuming you don't have uri alias for 'asdf'):
$ virsh connect asdf
error: failed to connect to the hypervisor
$ echo $?
0
After (with the same assumption):
$ virsh connect asdf
error: failed to connect to the hypervisor
error: no connection driver available for asdf
$ echo $?
1
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1356461
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The only function that we currently use from glib is g_sprintf().
That's a very big gun for such small target. Not only that, but
we've silently relied on wireshark dragging in the glib. Replace
the g_sprintf() with plain sprinf() so that we can drop the glib
dependency.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The original name 'admin_uri_default' was introduced to our code by commit
dbecb87f. However, at that time we already had a separate config file for
admin library but the commit mentioned above didn't properly adjust the
config's option name. The result is that when we're loading the config, we
check a non-existent config option (there's not much to do with the URIs
anyway, since we only allow local connection). Additionally, virt-admin's man
page documents, that the default URI can be altered by setting
admin_uri_default option. So the fix proposed by this patch leaves the
libvirt-admin.conf as is and adjusts the naming in the code as well as in the
virt-admin's man page.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In wireshark commit bbdd89b9 (contained in 2.1.0 release) they
have changed prototype of dissector function. Now it returns
number of bytes consumed by the dissector, and can get a pointer
to user specified data (which we don't use).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 834c5720 which extracted the generic functionality out of virsh
and made it available for other clients like virt-admin to make use of it, it
also introduced a bug when it renamed the original VIRSH_ environment variables
to VSH_ variables. Virt-admin of course suffers from the same bug, so this
patch modifies the generic module vsh.c to construct the correct name for
environment variables of each client from information it has.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1357363
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Well, the reason behind this change is that if the function is extended in some
way that e.g. would involve allocation we do not have a way of telling it to
the caller. More specifically, vshInitDebug only relies on some hardcoded
environment variables (by a mistake) that aren't documented anywhere so neither
virsh's nor virt-admin's documented environment variables take effect. One
possible solution would be duplicate the code for each CLI client or leave the
method be generic and provide means that it could figure out, which client
called it, thus initializing the proper environment variables but that could
involve operations that might as well fail in certain circumstances and the
caller should know that an error occurred.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
My compiler identified some variables that were set, but never
actually used. For instance, opts_required, and data_acomplete.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function tries to look up desired option for a given parsed
command. Upon successful return it also stores option position
into passed *opt_index. Now, this variable is type of int, even
though it is never ever used to store negative value. Moreover,
the variable is set from a local variable which is type of
size_t.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
To collect all balloon statistics for all guests it was necessary to make
several libvirt requests. Now it's possible to get all balloon statiscs via
single connectGetAllDomainStats call.
Signed-off-by: Derbyshev Dmitry <dderbyshev@virtuozzo.com>
There's been a forgotten fragment (copy-paste error probably) in the
virt-admin's man page referring the reader to our web page on how to construct
URIs in case of remote access, which sort of implies that we support it which
we don't at the moment, so better remove that.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
QEMU reports timestamp along with other memory statistics, but this information is not saved into domain statistics.
It could be useful to determine if the data reported is fresh or not.
Balloon statistics are not reported in hrf, so no modifications are made in qemu_monitor_text.c.
Signed-off-by: Derbyshev Dmitry <dderbyshev@virtuozzo.com>
'memtotal' in virtio drivers and qemu corresponds to 'available' in libvirt.
Because of that, 'stat-available-memory' is renamed into 'usable'.
Balloon statistics are not reported in hrf, so no modifications are made in qemu_monitor_text.c.
Signed-off-by: Derbyshev Dmitry <dderbyshev@virtuozzo.com>
The 'res' variable was only being initialized to NULL in the
if (!state) path; however, that path never used res and evenutally
res is assigned one of two results based on a pair of if then else if
conditions. If for some reason neither of those paths was taken and
the (!state) path wasn't taken, then 'res' would be indeterminate.
Found by Coverity, probably a false positive based on code paths, but
better safe than sorry for the future.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit id '740e4d70' altered the logic to fetch the sysconf values and
added a new virConfGetValueStringList which returns -1 on failure, 0 if
missing, and 1 if the value was present.
However, the caller only checked !shargv which caught Coverity's attention
since the following VIR_ALLOC_N(*shargv, 2) would be a NULL ptr deref
Signed-off-by: John Ferlan <jferlan@redhat.com>
Internally, all the data are represented as unsigned int, it is also documented
in the header file that users should use our exported constants that also
indicate that the data should be unsigned int. However, when polling for the
current server threadpool's configuration, virt-admin uses an incorrect
formatting parameter '%d' for printf. Instead, virt-admin should use formatting
parameter '%u'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1356769
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The new function works as expected, and matches the current level of
autocomplete offered, along with several other improvements like quotes
handling, multiple command completion and space handling. Now, it is easy
to introduce options completer here.
Signed-off-by: Nishith Shah <nishithshah.2211@gmail.com>
A bool 'report' has been introduced in various functions, which when set
to true will produce the error it is suppposed to produce, and when
false, will suppress the error. These functions are used in the next
patch for auto-completion.
Signed-off-by: Nishith Shah <nishithshah.2211@gmail.com>
Decompose vshCmddefOptParse into two helper functions, vshCmddefOptFill
and vshCmddefCheckInternals.
vshCmddefCheckInternals checks if the internal command definitions are
correct or not.
vshCmddefOptFill keeps track of the required options and mandatory
arguments through opts_required and opts_need_arg.
Signed-off-by: Nishith Shah <nishithshah.2211@gmail.com>
Similarly to what virsh virt-login-shell do, call virAdmInitialize prior to
initializing an event loop and initializing the error handler. Commit 97973ebb7
described and fixed an identical issue for libvirt_lxc.
Since virAdmInitialize becomes a public API after applying this patch,
the symbol is also added to public syms and the doc string of the method is
slightly enhanced analogically to virInitialize.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The VIR_STORAGE_POOL_EVENT_REFRESHED constant does not
reflect any change in the lifecycle of the storage pool.
It should thus not be part of the storage pool lifecycle
event set, but rather be a top level event in its own
right. Thus we introduce VIR_STORAGE_POOL_EVENT_ID_REFRESH
to replace it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
They can be used to tune auto-convergence algorithm (which is enabled
with VIR_MIGRATE_AUTO_CONVERGE).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Thanks to our smart option parser which automatically assigns positional
parameters the following (previously working) command fails:
virsh migrate test qemu+ssh://1.2.3.4/system tcp://1.2.3.4/
error: invalid argument: Unsupported compression method
'tcp://1.2.3.4/'
We need to make sure new options are added at the end of the list rather
than where they logically belong.
Reported by Brian Rak.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
A new hidden command for virsh that will iterate over
all command groups and commands and print help for every single one.
This involves running vshCmddefOptParse so we can get an error if
one of the command's option structure is invalid.
Crash dump in a old kvmdump format is being obsolete and cannot be loaded and
processed by crash utility since its version 6.1.0. A --memory-only option is
required in order to produce valid ELF file which can be later processed by the
crash utility. A new note is added to the dump command description.
Building with clang 3.8 triggers the following error:
CC virt_host_validate-virt-host-validate-qemu.o
virt-host-validate-qemu.c:36:11: error: initializing 'char *' with an expression of type 'const char *' discards qualifiers [-Werror,-Wincompatible-pointer-types-discards-qualifiers]
char *kvmhint = _("Check that CPU and firmware supports virtualization "
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
virt-host-validate-qemu.c:46:17: error: assigning to 'char *' from 'const char *' discards qualifiers [-Werror,-Wincompatible-pointer-types-discards-qualifiers]
kvmhint = _("Check that the 'kvm-intel' or 'kvm-amd' modules are "
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2 errors generated.
Fix by using 'const' for kvmhint declaration.
ARM/Aarch64 /proc/cpuinfo has no virtualization related flags.
Refactor the Qemu/KVM test a bit:
1) run the "for hardware virtualization" test only on plaforms with known
cpuinfo flags (x86, s390)
2) test for /dev/kvm also on platforms where no cpu flags are set
Finally Add a more generic error hint message for non-x86 plaforms
when /dev/kvm is missing.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Prior to joining the namespaces of the container, move the
process into the containers' cgroups, so that the shell that
is subsequently launched is under the container resource
constraints.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the shell must be looked up from the config setting in
/etc/libvirt/virt-login-shell.conf. This is inflexible if there
are containers where different users need different shells. Add
add a new 'auto-shell' config parameter which instructs us to
query the containers' /etc/passwd for the shell to be exec'd.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virt-login-shell environment will be initialized with
an arbitrary number of environment variables determined
by the SSH daemon and PAM configuration. Most of these are
not relevant inside the container, and at best they are
noise and at worst they'll break apps. For example if
XDG_RUNTIME_DIR is leaked to the container, it'll break
any apps using it, since the directory it points to is
only visible to the host OS filesystem, not the container
FS.
Use clearenv() to blank out everything and then set known
good values for PATH, SHELL, USER, LOGNAME HOME and TERM.
Everything else is left up to the login shell to initialize.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virDomainFree / virConnectClose methods will reset the
last error handle, so we must save the error during cleanup
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the shell config file parameter must be a list
giving the shell path and args. Allow it to be a plain
string argument as well.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently we request a login shell by passing the -l argument
to the shell. This is either hardcoded, or required to be
specified by the user in the virt-login-shell.conf file.
The standard way for login programs to request a shell run
as a login shell is to modify the argv passed to execve()
so that argv[0] contains the relative shell filename
prefixed with a zero. eg instead of doing
const char **shellargs = ["/bin/bash", "-l", NULL];
execve(shellargs[0], shellargs, env);
We should be doing
const char **shellargs = ["-bash", NULL];
execve("/bin/bash", shellargs, env);
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virt-login-shell program is supposed to look like a
regular shell to clients. Login services like sshd
expect the shell to accept a '-c cmdstring' argument to
specify a command to launch instead of presenting an
interactive prompt.
We can implement this by simply passing the '-c cmdstring'
data straight through to the real shell we use. This does
not open any security holes, since the command is not run
until we're inside the container namespaces. This allows
scp to work for users with virt-login-shell.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Extend the lxc-enter-namespace command so that it joins the
containers' cgroups before starting new namespaces. This
ensures that the commands run have the normal resource
limits applied
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Problem is, localtime_r() returns a pointer to converted time or
NULL in case of an error. But checking the glibc sources, error
will occur iff a NULL has been passed as an either of arguments
the function takes. But GCC fails to see that:
../../tools/virsh-network.c: In function 'cmdNetworkDHCPLeases':
../../tools/virsh-network.c:1370:12: error: potential null pointer dereference [-Werror=null-dereference]
ts = *localtime_r(&expirytime_tmp, &ts);
~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently if a guest has listen address 0.0.0.0 or [::] and you run
"virsh domdisplay $domain" you always get "spice://localhost:$port".
We want to print better address if someone is connected from a different
computer using "virsh -c qemu+ssh://some.host/system". This patch fixes the
behavior of virsh to print in this case "spice://some.host:$port".
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1332446
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Finally wire-up virAdmServer{Get,Set}ClientLimits APIs into virt-admin client.
Update the virt-admin's man page accordingly.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Usage of this keyword in front of function declaration that is exported via a
header file is unnecessary, since internally, this has been the default for most
compilers for quite some time.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=885380
Use vshCommandOptScaledInt instead of vshCommandOptULongLong so that
values with suffixes can be passed when bytes are being passed along.
Values for the iops parameters still need to be given in the absolute
form as they are not bytes but numbers.
Signed-off-by: Nishith Shah <nishithshah.2211@gmail.com>
cmdDetachInterface function checks for live config
flags and then passes the live/config domain xml
to virshDomainDetachInterface accordingly.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
When virHostValidateCPUFlag returns NULL, that's more an unexpected
error than the sign of missing CPU flags. Let's react to this
appropriately.
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Wire-up the public client listing API. Along with this change, a private time
simple conversion method to interpret client's timestamp obtained from server
has been added as well. Format used to for time output is as follows:
YYYY-mm-DD HH:MM:SS+ZZZZ.
Although libvirt exposes methods time-related methods through virtime.h
internally, it utilizes millisecond precision which we don't need in this case,
especially when connection timestamps use precision to seconds only.
This is just a convenience int to string conversion method.
To reflect the new API, man page has been adjusted accordingly.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The man page says: "(Re)-Connect to the hypervisor. When the shell is
first started, this is automatically run with the URI parameter
requested by the "-c" option on the command line." However, if you run:
virsh -c 'test://default' 'connect; uri'
the output will not be 'test://default'. That's because the 'connect'
command does not care about any virsh-only related settings and if it is
run without parameters, it connects with @uri == NULL. Not only that
doesn't comply to what the man page describes, but it also doesn't make
sense. It also means you aren't able to reconnect to whatever you are
connected currently.
So let's fix that in both virsh and virt-admin add a test case for it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add ULL suffix to all related operands of << or shift will give
all zeros instead of correct mask.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
We do have something similar for installing init system files.
Basically I'm trying to avoid the following warning produced by
automake:
tools/Makefile.am:429: warning: uninstall-local was already defined in condition TRUE, which includes condition WITH_BSD_NSS ...
tools/Makefile.am:292: ... 'uninstall-local' previously defined here
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
No need to special-case this one: we can add it to EXTRA_DIST so
that it will be shipped in any case, and if WITH_LOGIN_SHELL
happens to be enabled we mark it for installation as well.
We can't use eg. @sysconfdir@ directly in the .pod file, because
pod2man(1) will interpret that as a variable name and format it
accordingly.
Instead, we use eg. SYSCONFDIR and use a subsequent sed(1) call
to turn it into the expected @sysconfdir@.
The generated man pages may contain information that depend on
the build configuration, so they should not be shipped but
rather always built on the user's machine.
After this commit, all man pages are generated using the same two
steps:
1. Process a source $command.pod file with pod2man(1) to obtain
a valid man page in $command.$section.in
2. Process $command.$section.in with sed(1) to obtain the final
man page in $command.$section
Instead of embedding the pod information inside the respective
source files, store them in separate files.
This allows us to reduce the number of custom build rules as
most of the information can be inferred for the file name;
moreover, text editors are more likely to use proper syntax
highlighting for standalone pod files.
According to the autoconf manual, using '$(LN_S) -f' is not
portable; remove the target explicitly beforehand to work around
this limitation.
Adjust some slightly awkward indentation while at it.
virsh # list --all
Id Name State
----------------------------------------------------
1 test running
virsh # connect frob
error: Failed to connect to the hypervisor
error: no connection driver available for frob
virsh # list --all
error: failed to connect to the hypervisor
error: no valid connection
error: no connection driver available for frob
Seems sensible IMO to just not clear out the old connection state
until the new virConnectOpen succeeds.
https://bugzilla.redhat.com/show_bug.cgi?id=829160
The current rule fails if the target already exists:
cd /home/jenkins/build/libvirt/lib && \
ln -s libnss_libvirt.so.1 nss_libvirt.so.1
ln: nss_libvirt.so.1: File exists
Makefile:3357: recipe for target 'install-exec-hook' failed
However, all other rules concerned with installation are
idempotent and will happily overwrite an existing target,
so this one should as well.
After failing to parse the perf event list, the code would return
failure without freeing the previously acquired object. Rearrange the
code to avoid the problem.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1329046
Currently, if a connection URI was specified on the command line by the
'-c' switch, virsh connects to it, but after connecting overrides its
value with the one it tries to obtain from the VIRSH_DEFAULT_CONNECT_URI
environment variable.
This makes virsh connecting to the wrong URI if it disconnects from the
hypervisor and then tries to reconnect, and also leaks the original connname.
Fix by calling virGetEnvBlockSUID() before virshParseArgv().
On BSD we are creating this symlink to libnss_libvirt.so called
nss_libvirt.so. That's just the way it is on BSD. However, when
uninstalling, we try to remove libnss_libvirt.so instead of the
symlink. Moreover, if file we are trying to remove does not exist
we error out instead of ignoring the error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Wire up the server threadpool tunable APIs to virt-admin client. Also, provide
a man page for both commands.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Ploop image consists of directory with two files: ploop image itself,
called root.hds and DiskDescriptor.xml that contains information about
ploop device: https://openvz.org/Ploop/format.
Such volume are difficult to manipulate in terms of existing volume types
because they are neither a single files nor a directory.
This patch introduces new volume type - ploop. This volume type is used
by ploop volume's exclusively.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Upcoming compression options for migration command patch
series hits current limit of 32 possible options for a command.
Lets take one step further and support 64 possible options.
And all it takes is moving from 32 bit integers to 64 bit ones.
The only less then trivial change i found is moving from
'ffs' to 'ffsl'.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Since we didn't opt to use one single event for device lifecycle for a
VM we are missing one last event if the device removal failed. This
event will be emitted once we asked to eject the device but for some
reason it is not possible.
virt-host-validate, just like virt-login-shell, doesn't make sense
on Windows, so we should avoid building it.
Make the tool optional and build it by default on all platforms
except Windows, erroring out if the user attempts to build it
anyway.
Simply checking whether the cgroup name appears somewhere inside
/proc/self/cgroup is enough most of the time, but there are some
corner cases that require a more mindful parsing.
Explicitly add Linux and BSD syms files for nss to EXTRA_DIST
instead of using the LIBVIRT_NSS_SYMBOL_FILE variable, because its value
will point to either Linux or BSD syms file, but we need to ship both.
The existing code is built on the assumption that no cgroup
name can appear as part of another cgroup name; moreover, cgroups
are expected to always be listed in a specific order.
If that's not the case, eg. 'cpuacct' is listed before 'cpu', the
algorithm fails to detect the cgroup mount point.
Rewrite it to get rid of such assumptions.
Instead of relying on substring search, tokenize the input
and process each CPU flag separately. This ensures CPU flag
detection will continue to work correctly even if we start
looking for CPU flags whose name might appear as part of
other CPU flags' names.
The result of processing is stored in a virBitmap, which
means we don't have to parse /proc/cpuinfo in its entirety
for each single CPU flag we want to check.
Moreover, use of the newly-introduced virHostValidateCPUFlag
enumeration ensures we don't go looking for random CPU flags
which might actually be simple typos.
There is a LIBVIRT_ADMIN_DEFAULT_URI environment variable
which is honored by virAdmConnectOpen and documented
in the virt-admin man page.
LIBVIRT_DEFAULT_ADMIN_URI is undocumented and this is its
only occurrence.
When using the --start option, the show_count should not be set to
max_id as the --start <cpu> means we dont need those many initial cpu
stats. Hence, show_count should be adjusted accordingly.
https://bugzilla.redhat.com/show_bug.cgi?id=1249441
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that we have @flags we can support changing perf events just
in active or inactive configuration regardless of the other.
Previously, calling virDomainSetPerfEvents set events in both
active and inactive configuration at once. Even though we allow
users to set perf events that are to be enabled once domain is
started up. The virDomainGetPerfEvents API was flawed too. It
returned just runtime info.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Everywhere else we use a comma separated list. There's no good
reason to make 'perf' command an exception. Currently, it accepts
string list separated by '|'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I've noticed that these APIs are missing @flags argument. Even
though we don't have a use for them, it's our policy that every
new API must have @flags.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If the cpu cgroup is not found when validating an host for
LXC support, virt-host-validate will suggest to enable the
CONFIG_CGROUP_SCHED kconfig option.
The appropriate option is really CONFIG_CGROUP_CPU. The
QEMU checks already get that right, so no changes needed.
* tools/nss/libvirt_nss.[ch]: add BSD-comptabile wrappers and
register via the nss_module_register() interface
* m4/virt-nss.m4: add checks if we're building NSS for FreeBSD
* tools/Makefile.am: handle target library name differences, as
Linux needs libnss_libvirt.so.2 and FreeBSD needs
nss_libvirt.so.1. Also, different syms files have to be used
as Linux needs to export all the methods while FreeBSD
only needs to have nss_module_register()
* tests/nsstest.c, tests/nssmock.c: s/__linux__/NSS/
* tests/nssmock.c: pass int instead of mode_t to va_arg() to please
gcc 4.8
* libvirt_nss_bsd.syms: FreeBSD syms file
Historically we've used 'unsigned long' and allowed wrapping of negative
numbers for bandwidth values. Add a helper that will simplify adding
support for scaled integers and support for byte granularity while
keeping the compatibility with the older approach.
It was too similar to the non-scaled alternative.
before:
error: Numeric value 'abc' for <size> option is malformed or out of range
after:
error: Scaled numeric value 'abc' for <size> option is malformed or out of range
Every aligning requires at least one cast and it's hard to read. Let's
make a function that makes sure the pointer is moved according to the
alignment and use that to move throughout the data buffer.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
VIR_DOMAIN_EVENT_SUSPENDED_POSTCOPY and VIR_DOMAIN_PAUSED_POSTCOPY are
used on the source host once migration enters post-copy mode (which
means the domain gets paused on the source. After the destination host
takes over the execution of the domain, its virtual CPUs are resumed and
the domain enters VIR_DOMAIN_RUNNING_POSTCOPY state and
VIR_DOMAIN_EVENT_RESUMED_POSTCOPY event is emitted.
In case migration fails during post-copy mode and none of the hosts have
complete state of the domain, both domains will remain paused with
VIR_DOMAIN_PAUSED_POSTCOPY_FAILED reason and an upper layer may decide
what to do.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Even if nss is disabled, the build system tries to build some
targets like libnss_libvirt_impl.la and nsstest. Hide those
under the "if WITH_NSS" block like the rest of NSS plugin bits.
This function is a different beast compared to previous ones.
But yet again, nothing surprising is happening here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The implementation is pretty straightforward. Moreover, because
of the nature of things, gethostbyname_r and gethostbyname2_r can
be implemented at the same time too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Name Service Switch is a glibc feature responsible for many
things. Translating domain names into IP addresses and vice versa
is just one of them. However, currently it's the only
functionality that this commit is tickling. Well, in this commit
the plugin skeleton is introduced. Implementation to come in next
patches.
Because of the future testing, where the implementation is to be
linked with a test, this needs to go into static library. Linking
a program with an .so statically is not portable. Therefore a
dummy libnss_libvirt_impl library is being introduced too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some hypervisors (namely qemu) can have a separate connecton for
non-shared disks migration of active domains. Currently we have
no means to control the port of such a connection. At the same
time we have options to control port of memory migration traffic
(thru migration uri) as well as interfaces that target server
is bound to for incoming migration (thru VIR_MIGRATE_PARAM_LISTEN_ADDRESS).
Let's add the option for setting disks port too.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
There are cases when we don't want to tell the user we are connected.
That's for example when we first connect to the server without the
command 'connect' itself. That helps to clear out output of first
command, mainly when running non-interactively.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The API docs state that the API queries pinning info for all vCPUs and
thus we should allocate the bitmap even for the inactive ones.
The API will currently return bitmap only for the active vCPUs but that
will change in the future.
The VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event will be triggered once a job
(such as migration) finishes and it will contain statistics for the job
as one would get by calling virDomainGetJobStats. Thanks to this event
it is now possible to get statistics of a completed migration of a
transient domain on the source host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=872166
When the login session doesn't have an ssh -X type display agent in
order for libvirtd to run the polkit session authentication, attempts
to run 'virsh -c qemu:///system list' from an unauthorized user (or one
that isn't part of the libvirt /etc/group) will fail with the following
error from libvirtd:
error: authentication unavailable: no polkit agent available to
authenticate action 'org.libvirt.unix.manage'
In order to handle the local authentication, we will use the new
virPolkitAgentCreate API in order to create a text based authentication
agent for our non readonly session to authenticate with.
The new code will execute in a loop allowing 5 failures to authenticate
before failing out.
With this patch in place, the following occurs:
$ virsh -c qemu:///system list
==== AUTHENTICATING FOR org.libvirt.unix.manage ===
System policy prevents management of local virtualized systems
Authenticating as: Some User (SUser)
Password:
==== AUTHENTICATION COMPLETE ===
Id Name State
----------------------------------------------------
1 somedomain running
$
Since we have the macro there's no need for us to unwind it by
hand and check for mutually exclusive flags ourselves.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have macros that check and reject mutually exclusive
parameters to our commands. Use those instead of if-else tree.
At the same time, the variable @current becomes useless therefore
it is dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Rather than setting flags to -1 if none were specified, move the logic
to use the old API to the place where we need to decide. It simplifies
the logic a bit.
Since the code is changing the source image path by modifying the
existing XML snippet the <backingStore> stays in place.
As <backingStore> is relevant to the <source> part of the image, the
update of that part makes the element invalid.
CD/floppy images usually don't have a backing chain and the element is
currently ignored though but it might start being used in the future so
let's start behaving correctly.
Drop the <backingStore> subtree once we want to update the XML.
Before this patch, you'd get:
$ virsh change-media --eject --print-xml 10 hdc
<disk type="file" device="cdrom">
<driver name="qemu" type="qcow2"/>
<backingStore type="file" index="1">
<format type="qcow2"/>
<source file="/var/lib/libvirt/images/vm.1436949097"/>
<backingStore/>
</backingStore>
<target dev="hdc" bus="ide"/>
...
</disk>
After:
$ virsh change-media --eject --print-xml 10 hdc
<disk type="file" device="cdrom">
<driver name="qemu" type="qcow2"/>
<target dev="hdc" bus="ide"/>
...
</disk>
Since we introduced listing API earlier in these series, it's time
to wire up the API to the virt-admin client.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The macro would eat the first parameter. In some cases the format string
for vshPrint was eaten. In other cases the calls referenced variables
which did not exist in the given context. Avoid errors by doing compile
time checking.
When we hit OOM it doesn't really make sense to format the error message
by attempting to allocate it. Introduce a simple helper that prints a
static message and terminates the execution.
We have the same argument to many other commands that produce an
XML based on what user typed. But unfortunately vol-create-as
was missing it. Maybe nobody had needed it yet. Well, I did
just now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The way we usually write functions is that we start the work and
if something goes bad we goto cleanup and roll back there. Or
just free resources that are no longer needed. Do the same here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After a block job hits 100%, we only need to apply a timeout waiting for
a block job event if exactly one of the BLOCK_JOB or BLOCK_JOB_2
callbacks were able to be registered.
If neither callback could be registered, there's clearly no need for a
timeout.
If both callbacks were registered, then we're guaranteed to eventually
get one of the events. The path being used by virsh must be exactly the
source path or target device in the domain's disk definition, and these
are the respective strings sent back in these two events.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
When waiting for a block job, the various statuses (COMPLETED, READY,
CANCELED, etc.) should all be treated consistently by having the loop be
exited with "break". Use "goto cleanup" for the error cases only, when
no block job status is available.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
There is no need to call virshPrintJobProgress() unless the block job's
cur or end cursors have changed since the last iteration.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
This new algorithm adds support for wiping volumes using TRIM.
It does not overwrite all the data in a volume, but it tells the
backing storage pool/driver that all bytes in a volume can be
discarded.
It depends on the backing storage pool how this is handled.
A SCSI backend might send UNMAP commands to remove all data present
on a LUN.
A Ceph backend might use rbd_discard() to instruct the Ceph cluster
that all data on that RBD volume can be discarded.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
After commit 57177f1, the cpu-stats command format change to:
CPU0:
cpu_time 14401.507878990 seconds
vcpu_time 14378732785511
vcpu_time is not user friendly. After this patch, it will
change back:
CPU0:
cpu_time 14401.507878990 seconds
vcpu_time 14378.732785511 seconds
https://bugzilla.redhat.com/show_bug.cgi?id=1301807
Signed-off-by: Luyao Huang <lhuang@redhat.com>
virDomainGetCPUStats doesn't support flags so there's no need to carry
the 'flags' variable around. Additionally since the API is poorly
designed I doubt that it will be extended.
From the code it seems to me that we need user namespace if
configured in domain XML. Otherwise we don't use it at all.
However our tool is more strict about that. Fix this discrepancy.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since the introduction of virt-host-validate tool the set of
cgroup controllers we use has changed so the tool is checking for
some cgroups that we don't need (e.g. net_cls, although I doubt
we have ever used that one) and is not checking for those we
actually use (e.g. cpuset).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1250331
It all works like this. The change-media command dumps domain
XML, finds the corresponding cdrom device we want to change media
in and returns it in the xmlNodePtr form. This way we don't have
to bother with keeping all the subelements or attributes that we
don't care about in the XML that is fed back to libvirt for the
update API.
Now, the problem is we try to be clever here and detect if disk
already has a source (indicated by <source/> subelement).
However, bare fact that the element is there does not mean disk
has source. Make our clever check better.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The VIR_DOMAIN_EVENT_ID_MIGRATION_ITERATION event will be triggered
whenever VIR_DOMAIN_JOB_MEMORY_ITERATION changes its value, i.e.,
whenever a new iteration over guest memory pages is started during
migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We are getting the list of domains and after that we iterate over
the list and try to get status for each domain hoping it will
skip over domains that disappeared meanwhile. However, this
solution to race is bogus - domain may disappear right after we
have checked its state and before we exec another API over it
(e.g. virDomainHasManagedSaveImage()). Also, when printing just
names or uuids (list --name / --uuid) we issue APIs to obtain the
values, however these require no RPC call as all requested info
is in virDomain object that client already has.
Therefore move the status obtaining only to the place that really
needs it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In 50078cfbcb I've tried to fix distcheck but accidentally
broke rpm build. The problem is that rpm build not only sets
DESTDIR but also passes plugindir path. This results in double
DESTDIR being in the plugin path, Drop one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Even though the Makefile has WITH_WIRESHARK guards, the _SOURCES
variables are still processed when adding bits to the dist archive.
plugin.c is a generated file that is only built when wireshark is
enabled and it shouldn't be distributed, so use 'nodist'
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. Note that not all
'{.name = "interface",' entries are replaced, just those that have the
common .help string of "interface name or MAC address".
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. Note that not all
'{.name = "network",' entries are replaced, just those that have the
common .help string of "network name or uuid".
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create common macros to be used generically. Replace the more commonly
used "vol" option with a macro. This also adjusts 2 commands that
didn't have the correct helpstr - 'vol-create-from' and 'vol-clone'.
Both are described in the man page as taking vol, path, or key and
the code uses the virshCommandOptVol instead of virshCommandOptVolBy.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr for the less common help string for each
command option. Note that only file options using "OT_DATA" and
"OFLAG_REQ" will be replace - others are left as is.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which for many options in virsh-domain.c
is simply "affect current domain". So, create a second macro within that
file in order to define the more common use as a revector to the
common macro with the common _helpstr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which for many options in virsh-domain.c
is simply "affect running domain". So, create a second macro within that
file in order to define the more common use as a revector to the
common macro with the common _helpstr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which for many options in virsh-domain.c
is simply "affect next boot". So, create a second macro within that
file in order to define the more common use as a revector to the
common macro with the common _helpstr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. Note that not all
'{.name = "persistent",' entries are replaced, just those that have the
common .help string of "make live change persistent".
Non replaced instances are unique to the command.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which will be used to pass the translatable
helpstr since not all domain options can take the same string.
The majority of the options take 'N_("domain name, id or uuid")', so
create a separate macro with a _FULL suffix while those that do not
take the same string will use the VIRSH_COMMON_OPT_DOMAIN macro.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The macro is slightly adjusted to add an argument "_helpstr". This
will be passed as a translation macro string since other uses of the
option may not have the same exact help string (such as is the case
when the uuid is not suppliable for create commands).
In virsh-pool.c - we'll create a singular VIRSH_COMMON_OPT_POOL_FULL
in order to pass along the 'N_("pool name or uuid")'
In virsh-volume.c there will be a VIRSH_COMMON_OPT_POOL_FULL and a
VIRSH_COMMON_OPT_POOL_NAME, which passes 'N_("pool name")' for
the commands that can only pass a name. There will also be a
VIRSH_COMMON_OPT_POOL_OPTIONAL which is used for the command
options which use OT_STRING and don't require the --pool argument.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit id's 'cf793b00', 'e178688f', 'f9a6110f', '5372d49', and 'e193735'
added new VSH_POOL_ macros; however, it was pointed out after push that
commit id '834c5720' preferred use of VIRSH_ for the prefix over VSH_.
So this patch just changes the VSH_ to VIRSH_ and it changes the naming
format from VIRSH_<opt>_OPT_COMMON to VIRSH_COMMON_OPT_<opt>.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In wireshark commit ceb8d954 (v1.99.2) they have changed the
signature of a function that determines how long a libvirt packet
is. Now it accepts a void pointer for passing data into the
function. Well, this is nice, but we don't need it right now.
Anyway, we have to change our code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the upcoming patch we will need yet another #ifdef code block
depending on wireshark version. Instead of defining
WIRESHARK_COMPAT2 or something lets just compare the version
right at the place so that we can clearly see what version broke
API.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In wireshak commit 22149c55 (v.1.11.3) the API was renamed.
Follow the change in our code too. Since the wireshark change was
made in the very same version that we require at least we are
good to go.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In wireshark, they have introduced their own memory allocator
wmem. This means that we need to adapt our code to that change
too. Notably 0ad15f88ccf434e8210ca is the wireshark commit you
want to look at. It's the one where they dropped the old API. The
new allocator has been introduced in 84cc3daa (v1.10.0), however,
was not exposed until 5c05c9e0 (v1.10.0). Since we already are
requiring 1.11.3 or higher no other change is needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the wireshark commit e2735ecfdd7a96c they dropped
proto_tree_add_text in favor of proto_tree_add_item. Adapt to
this change.
Moreover, the proto_tree_add_item API is around for ages and we
are already using it anyway. Therefore we don't need to change
required version of wireshark.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit b22344f328 mistakenly reordered
Default-* lines. Thanks to that I noticed that we are very inconsistent
with our init scripts, so I took the liberty of synchronizing them,
updating them and making them all look shiny and new. So apart from
fixing the LSB requirements, I also fixed the ordering, specified
runlevels and fix the link to the reference specification.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Implement a --timestamp option for 'virsh net-event', similar to the
one for 'virsh event'.
When the option is used, the human-readable timestamp will be printed
before the message.
Implement a --timestamp option for 'virsh qemu-monitor-event', similar
to the one for 'virsh event'.
When the option is used, the human-readable timestamp will be printed
before the message, and the timing information provided by QEMU will
not be displayed.
No only coverity warns about this, but it kind of makes sense
too. We have a test whether host supports IOMMU. Some platforms
don't have it, I know. But in that case we should print a message
that it's unknown whether platform has it or not.
Before:
(no output)
After:
QEMU: Checking for device assignment IOMMU support : WARN (Unknown if this platform has IOMMU support)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
memory_dirty_rate corresponds to dirty-pages-rate in QEMU and
memory_iteration is what QEMU reports in dirty-sync-count.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The *event --loop commands would keep running even though a connection
to libvirtd is lost. This doesn't make a lot of sense since clearly we
won't get any new events from the closed connection.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This is no functional change, but I find it disturbing that
something_LDADD contains PIE_LDFLAGS while something_LDFLAGS
doesn't.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The manpage for sysconf() suggest including unistd.h as the
function is declared there. Even though we are not hitting any
compile issues currently, let's include the correct header file
instead of relying on some hidden include chain.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commmit df8192aa introduced admin related rename and some minor
(caused by automated approach, aka sed) and some more severe isues along with
it. First reason to revert is the inconsistency with libvirt library.
Although we deal with the daemon directly rather than with a specific
hypervisor, we still do have a connection. That being said, contributors might
get under the impression that AdmDaemonNew would spawn/start a new daemon
(since it's admin API, why not...), or AdmDaemonClose would do the exact
opposite or they might expect DaemonIsAlive report overall status of the daemon
which definitely isn't the case.
The second reason to revert this patch is renaming virt-admin client. The
client tool does not necessarily have to reflect the names of the API's it's
using in his internals. An example would be 's/vshAdmConnect/vshAdmDaemon'
where noone can be certain of what the latter function really does. The former
is quite expressive about some connection magic it performs, but the latter does
not say anything, especially when vshAdmReconnect and vshAdmDisconnect were
left untouched.
https://bugzilla.redhat.com/show_bug.cgi?id=1281710
Commit id '3c7590e0a' added the flag to the rbd backend, but provided
no means via virsh to use the flag. This patch adds a '--delete-snapshots'
option to both the "undefine" and "vol-delete" commands.
For "undefine", the flag is combined with the "--remove-all-storage" flag
in order to add the appropriate flag for the virStorageVolDelete call;
whereas, for the "vol-delete" command, just the flag is sufficient since
it's only operating on one volume.
Currently only supported for rbd backends.
https://bugzilla.redhat.com/show_bug.cgi?id=830056
Utilize recently added VIR_STORAGE_POOL_CREATE_WITH_BUILD* flags in
order to pass the flags along to the virStoragePoolCreateXML and
virStoragePoolCreate API's.
This affects the 'virsh pool-create', 'virsh pool-create-as', and
'virsh pool-start' commands. While it could be argued that pool-start
doesn't need the flags, they could prove useful for someone trying to
do one command build --overwrite and start command processing or
essentially starting with a clean slate.
NB:
This patch is loosely based upon code originally authored by Osier
Yang that were not reviewed and pushed, see:
https://www.redhat.com/archives/libvir-list/2012-July/msg00497.html
Although they both are the same now, a future patch will add new options
to pool-create-as. So create a common macro to capture commonality, then
use that in the command specific structure.
Although not currently used in more than one command, it soon will be
so create a common macro to be used in the new command location.
Additionally, add the ".flags = 0," for both to match the expections
of the structure being predefined.
Rather than continually cut/paste the "file" option for pool command
option structures, generate a macro which will commonly define it for
any command. Then of course use that macro.
Rather than continually cut/paste the "pool" option for pool command
option structures, generate a macro which will commonly define it for
any command. Then of course use that macro.
Instead of the custom error:
error: iothreadpin: invalid cpulist.
use vshCommandOptStringReq and let it report a more specific error:
error: Failed to get option 'cpulist': Option argument is empty
virAdmConnect was named after virConnect, but after some discussions,
most of the APIs called will be working with remote daemon and starting
them virAdmDaemon will make more sense. Only possibly controversal name
is CloseCallback (de)registration, and connecting to the daemon (which
will still be Open/Close), but even this makes sense if one thinks about
the daemon being opened and closed, e.g. as file, etc.
This way all the APIs working with the daemon will start with
virAdmDaemon prefix, they will accept virAdmDaemonPtr as first parameter
and that will better suit with other namings as well (virDomain*,
virAdmServer*, etc.).
Because in virt-admin, the connection name does not refer to a struct
that would have a connect in its name, also adjust 'connname' in
clients. And because it is not used anywhere in the vsh code, move it
from there into each client.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Due to the default of flags is VIR_CONNECT_LIST_DOMAINS_ACTIVE,
It doesn't show the domains that have been shutdown when we use
'virsh list' with only --state-shutoff.
Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com>
Our domain_conf.* files are big enough. Not only they contain XML
parsing code, but they served as a storage of all functions whose
name is virDomain prefixed. This is just wrong as it gathers not
related functions (and modules) into one big file which is then
harder to maintain. Split virDomainObjList module into a separate
file called virdomainobjlist.[ch].
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Introduce a new API to get libvirt version. It is worth noting, that
libvirt-admin and libvirt share the same version number. Unfortunately,
our existing API isn't generic enough to be used with virAdmConnectPtr
as well. Also this patch wires up this API to the virt-admin client
as a generic cmdVersion command.
As we need a client disconnect handler, we also need a mechanism to register
such handlers for a client. This patch introduced both the close callbacks and
also the client vshAdmCatchDisconnect handler to be registered with it. By
registering the handler we still need to make sure the client can react to
daemon's events like disconnect or keepalive, so asynchronous I/O event polling
is necessary to be enabled too.
Since most of our APIs rely on an acive functional connection to a daemon and
we have such a mechanism in libvirt already, there's need to have such a way in
libvirt-admin as well. By introducing a new public API, this patch provides
support to check for an active connection.
This patch introduces virt-admin client which is based on virsh client,
but had to reimplement several methods to meet virt-admin specific needs
or remove unnecessary virsh specific logic.
Adding this feature will allow users to easily attach a hostdev network
interface using PCI passthrough.
The interface can be attached using --type=hostdev and PCI address or
as --source. This command also allows you to tell, whether the interface
should be managed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=997561
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
While parsing device addresses we should use correct base and don't
count on auto-detect. For example, PCI address uses hex numbers, but
each number starting with 0 will be auto-detected as octal number and
that's wrong. Another wrong use-case is for PCI address if for example
bus is 10, than it's incorrectly parsed as decimal number.
PCI and CCW addresses have all values as hex numbers, IDE and SCSI
addresses are in decimal numbers.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The number of vCPUs for a guest must be between 1 and the
maximum value configured in the domain XML. This commit
introduces checks to make sure that passing count <= 0
results in an error.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1248277
Signed-off-by: Luyao Huang <lhuang@redhat.com>
The condition checking whether --format was specified was incorrect.
virsh crashed if the following format was used:
virsh dump VM dump --format '' --memory-only
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1272301
This looks for existance of DMAR (Intel) and IVRS (AMD)
files under /sys/firmware/acpi/tables/, as a sign that
the platform has IOMMU present & enabled in the BIOS.
If these are present and /sys/kernel/iommu_groups does
not contain any entries this is taken as a sign that
the kernel has not enabled the IOMMU currently.
If no ACPI tables are found we can't distinguish between
disabled in BIOS and not present in the hardware, so we
have to give the user a generic hint.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Win32 does not have support for mntent.h header, so the
method which uses this must be stubbed out.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Extend the virt-host-validate checks to see if the required
cgroups are compiled into the kernel and that they are
mounted on the system. The cgroups are all optional except
for 3 that LXC mandates
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently we just check that various devices are accessible.
This leads to inaccurate errors reported for /dev/kvm and
/dev/vhost-net if they exist but an unprivileged user lacks
access. Switch existing checks to look for file existance,
and add a separate check for accessibility of /dev/kvm
since some distros don't grant users access by default.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The LXC driver requires the uts, mnt, pid & ipc
namespaces, while net & user namespaces are
optional. Validate all these are present.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1250331
Even after my rework of startupPolicy handling, one command
slipped my attention. The change-media command has a very unique
approach to constructing disk XML. However, it will not preserve
startupPolicy attribute.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So, our mingw build is broken. It's because while libvirt_shell
library is using some of our internal APIs, e.g. virStrndup, and
readline API but it's not being linked with nor libvirt.la nor
libreadline. Only subsequent users of the library, like virsh,
do link to the needed libraries. In fact, I'm surprised Linux
linker doesn't care, because how can it make a static library
with missing symbols is mystery to me.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Although 0 length block jobs aren't entirely useful, the output of virsh
blockjob is empty due to the condition that suppresses the output for
migration jobs that did not start. Since the only place that actually
uses the condition that suppresses the output is in migration, let's
move the check there and thus add support for 0 of 0 equaling to 100%.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1196711
After my "client rpc: Report proper error for keepalive disconnections"
patch, virsh would no long print a warning when it closes a connection
to a daemon after a keepalive timeout. Although the warning
virsh # 2015-09-15 10:59:26.729+0000: 642080: info :
libvirt version: 1.2.19
2015-09-15 10:59:26.729+0000: 642080: warning :
virKeepAliveTimerInternal:143 : No response from client
0x7efdc0a46730 after 1 keepalive messages in 2 seconds
was pretty ugly, it was still useful. This patch brings the useful part
back while making it much nicer:
virsh # error: Disconnected from qemu:///system due to keepalive timeout
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We have the same argument to many other commands that produce an
XML based on what user typed. But unfortunately attach-interface
was missing it. Maybe nobody had needed it yet. Well, I did
just now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Let's move some variables from an inside loop to global function
declaration header block. It's going to be easier for next
patches. At the same time, order the cleanup calls at the
function's end so it's easier to track which variables are freed
and which not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's no reason why debug initialization could not be made completely
hidden, just like readline initialization is. The point of the global
initializer vshInit is to make initialization of smaller features transparent
to the user/caller.
Currently, we set interactive mode as default possibly reverting the
setting after we parse the command line arguments. There's nothing
particulary wrong with that, but a call to vshReadlineInit is performed
always in the global initializer just because the default mode is interactive.
Rather than moving vshReadlineInit call somewhere else (because another client
might want to implement interactive mode only), we could make the decision
if we're about to run in interactive mode once the command line is parsed.
Commit a0b6a36f separated vshInitDebug from the original vshInit
(before virsh got split and vshInit became virshInit - commit 834c5720)
in order to be able to debug command line parsing.
After the parsing is finished, debugging is reinitialized to work properly.
There might as well be other features that require re-initialization as
the command line could specify parameters that override our defaults which
had been set prior to calling vshArgvParse.
As part of the effort to stay consistent, change the vshInit signature
from returning int to returning bool. Moreover, remove the
unnecessary error label as there is no cleanup that would make use of
it.
Caller is responsible for freeing the result of virStringJoin()
when no longer needed:
==10701== 1 bytes in 1 blocks are definitely lost in loss record 1 of 806
==10701== at 0x4C29F80: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==10701== by 0xAADB679: strdup (in /lib64/libc-2.20.so)
==10701== by 0x4F18655: virStrdup (virstring.c:726)
==10701== by 0x4F175AF: virStringJoin (virstring.c:165)
==10701== by 0x131D4D: vshReadlineInit (vsh.c:2572)
==10701== by 0x1322DF: vshInit (vsh.c:2736)
==10701== by 0x1347C1: main (virsh.c:907)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Adds a new interface type using UDP sockets, this seems only applicable
to QEMU but have edited tree-wide to support the new interface type.
The interface type required the addition of a "localaddr" (local
address), this then maps into the following xml and qemu call.
<interface type='udp'>
<mac address='52:54:00:5c:67:56'/>
<source address='127.0.0.1' port='11112'>
<local address='127.0.0.1' port='22222'/>
</source>
<model type='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
</interface>
QEMU call:
-net socket,udp=127.0.0.1:11112,localaddr=127.0.0.1:22222
Notice the xml "local" entry becomes the "localaddr" for the qemu call.
reference:
http://lists.gnu.org/archive/html/qemu-devel/2011-11/msg00629.html
Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When looking up a domain, we try to look up by ID, UUID and NAME
consequently while not really caring which of those lookups succeeds.
The problem is that if any of them fails, we dispatch the error from the
driver and that means setting both threadlocal and global error. Let's
say the last lookup (by NAME) succeeds and resets the threadlocal error as any
other API does, however leaving the global error unchanged. If the underlying
virsh command does not succeed afterwards, our cleanup routine in
vshCommandRun ensures that no libvirt error will be forgotten and that's
exactly where this global error comes in incorrectly.
# virsh domif-setlink 123 vnet1 up
error: interface (target: vnet1) not found
error: Domain not found: no domain with matching id 123
This patch also resets the global error which would otherwise cause some
minor confusion in reported error messages.
https://bugzilla.redhat.com/show_bug.cgi?id=1254152
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This patch removes the static keyword from the vshReadline which was
introduced in commit 834c5720e4. With
readline the vshReadline function is not static but when compiling
without readline it was defined as static which caused compilation
error.
In order to share as much virsh' logic as possible with upcomming
virt-admin client we need to split virsh logic into virsh specific and
client generic features.
Since majority of virsh methods should be generic enough to be used by
other clients, it's much easier to rename virsh specific data to virshX
than doing this vice versa. It moved generic virsh commands (including info
and opts structures) to generic module vsh.c.
Besides renaming methods and structures, this patch also involves introduction
of a client specific control structure being referenced as private data in the
original control structure, introduction of a new global vsh Initializer,
which currently doesn't do much, but there is a potential for added
functionality in the future.
Lastly it introduced client hooks which are especially necessary during
client connecting phase.
This patch implements new virsh command, domrename.
Using domrename, it will be possible to rename domain from the virsh shell by
calling virRenameDomain API.
It takes two arguments, current domain name and new domain name.
Example:
virsh # list --all
Id Name State
----------------------------------------------------
- bar shut off
virsh # domrename bar foo
Domain successfully renamed
virsh # list --all
Id Name State
----------------------------------------------------
- foo shut off
virsh #
Signed-off-by: Tomas Meszaros <exo@tty.sk>
In my previous commit d7f5c88961 I tried to introduce support
for inbound.floor. But the code change was incomplete. This is
the change needed to fully enable the feature.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 6983d6d2 tried to improve parseRateStr but broke the build
instead for compilers that were not able to properly introspect the for
loop indexed by the enum resulting into the following error:
virsh-domain.c: In function 'parseRateStr':
virsh-domain.c:916:13: error: 'field_name' may be used uninitialized in this function [-Werror=maybe-uninitialized]
vshError(ctl, _("malformed %s field"), field_name);
^
virsh-domain.c:915:13: error: 'tmp' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (virStrToLong_ullp(token, NULL, 10, tmp) < 0) {
^
Rather than trying to fix the code, refactor the function again by
reusing virStringSplit.
We have a function parseRateStr() that parses --inbound and
--outbound arguments to both attach-interface and domiftune.
Now that we have all virTypedParams macros needed for QoS,
lets parse even floor attribute. The extended format for the
arguments looks like this then:
--inbound average[,peak[,burst[,floor]]]
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The function is used to parse a tuple delimited by commas into
virNetDevBandwidth structure. So far only three out of fore
fields are supported: average, peak and burst. The single missing
field is floor. Well, the parsing works, but I think we can do
better. Especially when we will need to parse floor too in very
close future.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1250287
When run domfsinfo in quiet mode, we cannot get any
useful information (just get \n), this is because
we didn't use vshPrint to print useful information.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Reuse the vshBlockJobWait infrastructure to refactor cmdBlockCommit to
use the common code. This additionally fixes a bug when working with
new qemus, where when doing an active commit with --pivot the pivoting
would fail, since qemu reaches 100% completion but the job doesn't
switch to synchronized phase right away.
Introduce helper function that will provide logic for waiting for block
job completion so the 3 open coded places can be unified and improved.
This patch introduces the whole logic and uses it to fix
cmdBlockJobPull. The vshBlockJobWait function provides common logic for
block job waiting that should be robust enough to work across all
previous versions of libvirt. Since virsh allows passing user-provided
strings as paths of block devices we can't reliably use block job events
for detection of block job states so the function contains a great deal
of fallback logic.
Use the VSH_EXCLUSIVE_OPTIONS to exclude combinations of --pivot and
--keep-overlay and refactor the enforcing of the --wait option and other
flags that imply --wait.
Use the VSH_EXCLUSIVE_OPTIONS_VAR to interlock incompatible options.
Since a variable named 'abort' would conflict with older compilers use
VSH_EXCLUSIVE_OPTIONS for the --abort option.
Commit ed8155eafb documented that
mhz field in virNodeInfo might be 0 if the frequency is unknown. Modify
virsh to know about that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Some drivers don't expose available huge page sizes in the
capabilities XML. For instance, LXC driver is one of those.
This has a downside that when virsh is trying to get
aggregated info on free pages per all NUMA nodes, it fails.
The problem is that the virNodeGetFreePages() API expects
caller to pass an array of page sizes he is interested in.
In virsh, this array is filled from the capabilities from
'/capabilities/host/cpu/pages' XPath. As said, in LXC
there's no such XPath and therefore virsh fails currently.
But hey, we can fallback: the page sizes are exposed under
'/capabilities/host/topology/cells/cell/pages'. The page
size can be collected from there, and voilà the command
works again. But now we must make sure that there are no
duplicates in the array passed to the public API. Otherwise
we won't get as beautiful output as we are getting now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's this condition:
flags & VIR_DOMAIN_AFFECT_CURRENT && virDomainIsActive(dom)
which can never be true since VIR_DOMAIN_AFFECT_CURRENT has hardcoded
value of zero. Therefore virDomainIsActive() is a dead code. However,
the condition could make sense if it is rewritten as the following:
!(flags & VIR_DOMAIN_AFFECT_CONFIG) && virDomainIsActive(dom)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit id '81dd81e' caused a regression when attempting to print a
specific vcpuid that is out of the range of the maximum vcpus for
the guest, such as:
$ virsh vcpupin $dom 1000
VCPU: CPU Affinity
----------------------------------
$
Rather than just recover the old message, let's adjust the message based
on what would be displayed for a similar failure in the set path, such as:
$ virsh vcpupin $dom 1000
error: vcpu 1000 is out of range of persistent cpu count 2
$ virsh vcpupin $dom 1000 --live
error: vcpu 1000 is out of range of live cpu count 2
$
Signed-off-by: Luyao Huang <lhuang@redhat.com>
This patch provides support for a new watchdog action "inject-nmi" which
allows to define an inject of a non-maskable interrupt into a guest.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
The SCSI Architecture Model defines a logical unit address
as 64-bits in length, so change the field accordingly so
that the entire value could be stored.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
The address elements are all unsigned integers, so we should
use the appropriate print directive when printing it.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
The SCSI address element attributes bus, target, and unit are expected
to be positive values, so make sure no one provides a negative value since
the value is stored as an unsigned.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
When the block job would fail while watching it using the "--wait"
option for blockcopy, virsh would rather unhelpfully report:
$ virsh blockcopy vm hdc /tmp/raw.img --granularity 4096 --verbose --wait
Now in mirroring phase
Add a special case when the block job vanishes while waiting for it to
finish to improve the message:
$ virsh blockcopy vm hdc /tmp/raw.img --granularity 8192 --verbose --wait
error: Block Copy unexpectedly failed
Add `virsh migrate' option `--migrate-disks' that allows CLI user to
explicitly specify block devices to migrate.
Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
You had only one job. That's what you can say about this example
binary. In future, parts of virsh that are usable for this binary
should be split into separate shell-utils and virt-admin should gain all
the cool features of virsh without too much code addition.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When reviewing some network patches, I've noticed we don't have
those switches to the 'net-list' command. We should. They are
merely copied over from 'list' command.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of sticking to old code pattern use the one laid out by
cmdList. Use FILTER() macro instead of series of boolean
variables.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the pre-NUMA ages pinning a vCPU to all pCPUs was eaqual to deleting
the pinning info. Now it does not entirely work that way. Pinning a vCPU
to all pCPUs might be a desired operation. Additionally removal of the
pinning will result into using the default pinning information at the
next boot which might be different from all vcpus.
This patch removes the false assumption that we should remove the
pinning after pinning to all vCPUs and tweaks the documentation for
virsh.
A later patch will implement a new flag for the virDomainPinVcpuFlags
API that will allow to remove the pinning in a sane way.
When watching a job (save, managedsave, dump, migrate) virsh spawns a
thread to call the appropriate API and waits for the result while
watching for interruption signals (SIGINT, Ctrl-C on the terminal).
Whenever such signal is caught, virsh calls virDomainAbortJob, stops
waiting for the job, and returns the result of virDomainAbortJob.
This is wrong because the job might have finished in the meantime or it
might have been cancelled by someone else and virsh would just report
the failure to abort the job. However, we are not interested in the
virDomainAbortJob's result at all, we need to keep waiting for the main
job to finish and report its result instead.
https://bugzilla.redhat.com/show_bug.cgi?id=1131755
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This will allow us to use vshError() to report errors from inside
vshCommandOpt*(), instead of replicating the same logic and error
messages all over the place.
We also have more context inside the vshCommandOpt*() functions,
for example the actual value used on the command line, which means
we can produce more detailed error messages.
vshCommandOptBool() is the exception here, because it's explicitly
designed not to report any error.
When shrinking a volume by a certain size, instead of typing
vol-resize volume 1G --delta --shrink
we allow the convience of specifying a negative value:
vol-resize volume -1G --delta --shrink
getting the same results with one more character.
A negative value only makes sense as a delta. Imply the
--delta parameter if the value is negative.
Still require --shrink, because the operation is potentially
destructive.
https://bugzilla.redhat.com/show_bug.cgi?id=1224088
commit id 'bd00e00e' neglected to add the new adapter source options
into the if condition that allowed printing the <source> XML fields.
The <adapter type='fc_host'.../> doesn't require other options in order
to be complete.
Some virsh commands have a size parameter, which is handled as scaled
integer. We don't have any *feature* that would allow to use '-1' as
maximum size, so it's safe to reject any negative values for those
commands.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1159171
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The option didn't have VSH_OT_INT type even thought it's expected
to be numeric, as shown by the fact that vshCommandOptInt() is later
used to retrieve its value.
Replace more than 30 ad-hoc error messages with a single, generic one
that contains the name of the option being processed and some hints
to help the user understand what could have gone wrong.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1207043
When parsing a cpulist, the virBitmapParse is used. On an invalid
bitmap an error is reported, but the error gets cleared
immediately by subsequent public APIs call, e.g. virDomainFree().
Moreover, we don't check whether bitmap fits into maximal CPU ID
on the host. Therefore the following examples failed without any
error:
# virsh vcpupin test3 1 aaa
# virsh vcpupin test3 1 1000
Signed-off-by: Luyao Huang <lhuang@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1191227
Since 0fa15b19 we have this variable SYNC_TIME which allows users to
synchronize time on domain resume. However, despite what documentation
says, it's by default on because it's never initialized. Fix this by
setting it to zero at the beginning of the libvirt-guests script.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Extend it to a universal helper used for clearing lists of any objects.
Note that the argument type is specifically void * to allow implicit
typecasting.
Additionally add a helper that works on non-NULL terminated arrays once
we know the length.
The --maximum option wasn't properly parsed and the equivalent flag
wasn't set. Fix this bug and also rewrite the way we check this option
by using new macro. The new approach is that --maximum requires
--config, no other combination is allowed, because they don't make sense.
The new error will be:
# virsh setvcpus test --maximum 10
error: Option --config is required by option --maximum
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1204033
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1161617
Add command to allow adding and removing IOThreads from the domain including
the configuration and live domain.
$ virsh iothreadadd --help
NAME
iothreadadd - add an IOThread to the guest domain
SYNOPSIS
iothreadadd <domain> <id> [--config] [--live] [--current]
DESCRIPTION
Add an IOThread to the guest domain.
OPTIONS
[--domain] <string> domain name, id or uuid
[--id] <number> iothread for the new IOThread
--config affect next boot
--live affect running domain
--current affect current domain
$ virsh iothreaddel --help
NAME
iothreaddel - delete an IOThread from the guest domain
SYNOPSIS
iothreaddel <domain> <id> [--config] [--live] [--current]
DESCRIPTION
Delete an IOThread from the guest domain.
OPTIONS
[--domain] <string> domain name, id or uuid
[--id] <number> iothread_id for the IOThread to delete
--config affect next boot
--live affect running domain
--current affect current domain
Assuming a running $dom with multiple IOThreads assigned and that
that the $dom has disks assigned to IOThread 1 and IOThread 2:
$ virsh iothreadinfo $dom
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-1
$ virsh iothreadadd $dom 1
error: invalid argument: an IOThread is already using iothread_id '1' in iothreadpids
$ virsh iothreadadd $dom 1 --config
error: invalid argument: an IOThread is already using iothread_id '1' in persistent iothreadids
$ virsh iothreadadd $dom 4
$ virsh iothreadinfo $dom
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-1
4 0-3
$ virsh iothreadinfo $dom --config
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-1
$ virsh iothreadadd $dom 4 --config
$ virsh iothreadinfo $dom --config
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-1
4 0-3
Assuming the same original configuration
$ virsh iothreaddel $dom 1
error: invalid argument: cannot remove IOThread 1 since it is being used by disk 'vde'
$ virsh iothreaddel $dom 3
$ virsh iothreadinfo $dom
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
$ virsh iothreadinfo $dom --config
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-1
virDomainGetJobStats is able to report statistics of a completed
migration, however to get usable downtime and total time statistics both
hosts have to keep synchronized time. To provide at least some
estimation of the times even when NTP daemons are not running on both
hosts we can just ignore the time needed to transfer a migration cookie
to the destination host. The result will be also inaccurate but a bit
more predictable. The total/down time will just be at least what we
report.
https://bugzilla.redhat.com/show_bug.cgi?id=1213434
Commit a0670ae caused a regression in 'virsh event' and
'virsh qemu-monitor-event' - if a user tries to filter the
command to a specific domain, an error message is printed:
$ virsh event dom --loop
error: internal error: virsh qemu-monitor-event: no domain VSH_OT_DATA option
and then the command continues as though no domain had been
supplied (giving events for ALL domains, instead of the
requested one). This is because the code was incorrectly
assuming that all "domain" options would be supplied via a
mandatory VSH_OT_DATA, even though "domain" is optional for
these two commands, so we had changed them to VSH_OT_STRING
to quit failing for other reasons (ever since it was decided
that VSH_OT_DATA and VSH_OT_STRING should no longer be
synonyms).
In looking at the situation, though, the code for looking up
a domain was making a pointless check for whether the option
exists prior to finding the option's string value, as
vshCommandOptStringReq does just fine at reporting any errors
when looking up a string whether or not the option was present.
So this is a case of regression fixing by pure code deletion :)
* tools/virsh-domain.c (vshCommandOptDomainBy): Drop useless filter.
* tools/virsh-interface.c (vshCommandOptInterfaceBy): Likewise.
* tools/virsh-network.c (vshCommandOptNetworkBy): Likewise.
* tools/virsh-nwfilter.c (vshCommandOptNWFilterBy): Likewise.
* tools/virsh-secret.c (vshCommandOptSecret): Likewise.
* tools/virsh.h (vshCmdHasOption): Drop unused function.
* tools/virsh.c (vshCmdHasOption): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
When set guest memory with a invalid parameter of --soft-limit,
it posts weird error:
$ virsh memtune r7 --hard-limit 20417224 --soft-limit 9007199254740992 \
--swap-hard-limit 35417224
error: Unable to parse integer parameter 'NAME
Change it to
error: Unable to parse integer parameter soft-limit
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1211550
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Use virBitmapDataToString instead of constructing the ranges bit
by bit, remove the checking of parameters (that is already done
by the callers).
Let the callers choose the right bitmap, since there's only
one that uses this helper on a matrix-in-an-array.
$ sudo virsh change-media f19 hdc /mnt/data/devel/media/Fedora-16-x86_64-Live-KDE.iso
succeeded to complete action update on media
Change the message to:
Successfully {inserted,ejected,changed} media.
https://bugzilla.redhat.com/show_bug.cgi?id=967946
In virsh we have two printing functions: vshPrint() which prints a
string onto stdout and vshPrintExtra() which does not print anything
if virsh is run in quiet mode. Usually, the former is used to print
actual results, while the latter to print strings like table headers
and other formatting stuff. However, in cmdDomIfAddr we have
mistakenly used vshPrintExtra even for actual data. After this patch,
the output should look like the following:
# virsh -q domifaddr test3 --source agent
lo 00:00:00:00:00:00 ipv4 127.0.0.1/8
- - ipv6 ::1/128
ens8 52:54:00:1a:cb:3f ipv6 fe80::5054:ff:fe1a:cb3f/64
virbr0 52:54:00:db:51:e7 ipv4 192.168.122.1/24
virbr0-nic 52:54:00:db:51:e7 N/A N/A
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Dependant is flagged as wrong in US dictionary (only valid in UK
dictionary, and even then, it has only the financial sense and not the
inter-relatedness sense that we are more prone to be wanting throughout
code).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1206479
As described in virDomainBlockCopy() parameters description, the
VIR_DOMAIN_BLOCK_COPY_GRANULARITY parameter may require the value to
have some specific attributes (e.g. be a power of two or fall within a
certain range). And in qemu, a power of two is required. However, our
code does not check that and let qemu operation fail. Moreover, the
virsh man page is not as exact as it could be in this respect.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The overflow check for the bandwidth parameter did not jump to the
cleanup label.
Additionally virsh should use vshError instead of virReportError.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1206987
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Commit 2f36e6944 (re-)introduced a use of an identifier 'interface',
which causes this build failure on mingw:
../../tools/virsh-domain-monitor.c: In function 'cmdDomIfAddr':
../../tools/virsh-domain-monitor.c:2233:17: error: expected identifier or '(' before 'struct'
const char *interface = NULL;
^
See also commit 6512c8b. Sadly, I'm not quite sure how to write a
syntax check that can poison the use of this identifier.
* tools/virsh-domain-monitor.c (cmdDomIfAddr): Use ifacestr instead.
Signed-off-by: Eric Blake <eblake@redhat.com>
The virNodeDeviceDettach API only works on PCI devices.
Originally added by commit 10d3272e, but the API never
supported USB devices.
Reported by: Martin Polednik <mpolednik@redhat.com>
Wikipedia's list of common misspellings [1] has a machine-readable
version. This patch fixes those misspellings mentioned in the list
which don't have multiple right variants (as e.g. "accension", which can
be both "accession" and "ascension"), such misspellings are left
untouched. The list of changes was manually re-checked for false
positives.
[1] https://en.wikipedia.org/wiki/Wikipedia:Lists_of_common_misspellings/For_machines
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When libvirt is starting a domain, it reports the state as SHUTOFF until
it's RUNNING. This is not ideal because domain startup may take a long
time (usually because of some configuration issues, firewalls blocking
access to network disks, etc.) and domain lists provided by libvirt look
awkward. One can see weird shutoff domains with IDs in a list of active
domains or even shutoff transient domains. In any case, it looks more
like a bug in libvirt than a normal state a domain goes through.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The variable holds formatted suffix to each line printed out
(address type, address and prefix). However, the variable is
never freed. At the same time, honour fact, that data held in
the variable is not constant.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Make sure we don't print (null) (which in fact is printf()'s
cleverness anyway, not ours). If no HW address is present, print
"N/A" string just like we do for other fields.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The command did not modify the disk type and thus didn't allow to change
media from a file image to a block backed image or vice versa. In
addition when operating on a network backed removable devices the
command would replace the while <source> subelement with an invalid one.
This patch adds the --block option that allows to specify that the new
image is block backed and assumes that without that option all images
are file backed. Since network backends were always mangled it should
not cause problems.
Since cmdDetachDisk() calls into vshPrepareDiskXML() with
type == VSH_PREPARE_DISK_XML_NONE && source == NULL this would result
into skipping all the checks and effectively turn the function into a
XML formatter.
This patch changes the code to use the formatter directly so that the
function can be refactored in a easier way.
Wireshark supports pkg-config since 1.11.3. Right now we build
wireshark-dissectior tool as default trough rpm build only on
fedora >= 21 and there is new wireshark that supports pkg-config.
If someone wants to build libvirt with wireshark-dissector against old
wireshark, they should specify the location by hand.
This patch is mainly to fix wrong dependency on wireshark binary as it
doesn't make sense to require that binary file to just get version info
of that package in makefile.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit f182da20 (v1.2.6) caused a slight regression in virsh
reporting of a non-active block job; where it used to state
"Commit complete", it now states "Now in synchronized phase".
But the synchronized phase is only possible for an active commit.
For a reproducer, I created a chain 'a <- b <- c <- d <- e' and
ran virsh blockcommit $dom vda --top c --base a --verbose --wait
* tools/virsh-domain.c (cmdBlockCommit): Synchronized phase is
only possible on active commits.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1135491
$ virsh iothread --help
NAME
iothreadpin - control domain IOThread affinity
SYNOPSIS
iothreadpin <domain> <iothread> <cpulist> [--config] [--live] [--current]
DESCRIPTION
Pin domain IOThreads to host physical CPUs.
OPTIONS
[--domain] <string> domain name, id or uuid
[--iothread] <number> IOThread ID number
[--cpulist] <string> host cpu number(s) to set
--config affect next boot
--live affect running domain
--current affect current domain
Using the output from iothreadsinfo, allow changing the pinned CPUs for
a single IOThread.
$ virsh iothreadsinfo $dom
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-1
$ virsh iothreadpin $dom 3 0-2
Then view the change
$ virsh iothreadsinfo $dom
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0-2
If an invalid value is supplied or require option missing,
then an error will be displayed:
$ virsh iothreadpin $dom 4 3
error: invalid argument: iothread value out of range 4 > 3
$ virsh iothreadpin $dom 3
error: command 'iothreadpin' requires <cpulist> option
Now that qemuDomainBlocksStatsGather provides functions of both
qemuMonitorGetBlockStatsParamsNumber and qemuMonitorGetBlockStatsInfo we
can reuse it and kill a lot of code.
Additionally as a bonus qemuDomainBlockStatsFlags will now support
summary statistics so add a statement to the virsh man page about that.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1142636
Add the 'iothreadsinfo' command to display IOThread Info data. Allow for
[--live] or [--config] options in order to display live or config data
for an active domain.
$ virsh iothreadsinfo --help
NAME
iothreadsinfo - view domain IOThreads
SYNOPSIS
iothreadsinfo <domain> [--config] [--live] [--current]
DESCRIPTION
Returns basic information about the domain IOThreads.
OPTIONS
[--domain] <string> domain name, id or uuid
--config affect next boot
--live affect running domain
--current affect current domain
An active domain may return:
$ virsh iothreads $dom
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0
$ echo $?
0
For domains which don't have IOThreads the following is returned:
$ virsh iothreads $dom
No IOThreads found for the domain
$ echo $?
0
For domains which are not running the following is returned:
$ virsh iothreads $dom --live
error: Unable to get domain IOThreads information
error: Requested operation is not valid: domain is not running
$ echo $?
1
Editing a domains configuration and modifying the iothreadpin data for
thread 3 from nothing provided to setting a cpuset of '0-1' and then
displaying using --config would display:
$ virsh iothreads f18iothr --config
IOThread ID CPU Affinity
----------------------------
1 2
2 3
3 0-1
$
Signed-off-by: John Ferlan <jferlan@redhat.com>
Fix vshMemtuneGetSize to return correct value. We can then decide
according that return code whether a parameter is present and valid or
not. This will allow as to accept 0 as a valid value.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
According to docs, we only support 2 link states for an interface
up/down, 'up' being the default state if link state is unspecified in
domain's XML, so the message when no link state is provided should be
changed a little.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1141119
Previously when a domain would get stuck in a domain job due to a
programming mistake we'd report the following control state:
$ virsh domcontrol domain
occupied (1424343406.150s)
The timestamp is invalid as the monitor was not entered for that domain.
We can use that to detect that the domain has an active job and report a
better error instead:
$ virsh domcontrol domain
error: internal (locking) error
https://bugzilla.redhat.com/show_bug.cgi?id=921426
Add to the man page a more complete description of what exactly the
command expects on input and will return on output based on what is
currently supported.
Perhaps missing findPoolSources implementations are backends for
sheepdog and rbd. Also missing any backend is zfs.
https://bugzilla.redhat.com/show_bug.cgi?id=1070695
Modify the virsh man page to more accurately describe which values are
set by the virsh setmem and displayed by the virsh memtune or dominfo
based on the setmem command results.
A disk using a source pool is listed as having a source '-' in domblklist
because it doesn't check the right XML syntax to find the source.
Add a check for "./source/volume" which is where the "path" (of sorts)
to the volume name is described.
NUMA enabled guest configuration explicitly specifies memory sizes for
individual nodes. Allowing the virDomainSetMemoryFlags API (and friends)
to change the total doesn't make sense as the individual node configs
are not updated in that case.
Forbid use of the API in case NUMA is specified.
