Commit Graph

875 Commits

Author SHA1 Message Date
Daniel P. Berrangé
5a92e912ef po: dedupe authors in translations
Weblate gets confused if the same email address is mentioned multiple
times in the translation headers. Dedupe authors so that each author
is mentioned only once, with a range of years listed.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-06-04 20:50:49 +01:00
Daniel P. Berrangé
611e03127f po: go back to storing the .pot file in git
To integrate with weblate the only practical option currently is to
store the .pot file in git. This is required so that it can add new
languages by cloning the .pot file. It also enables weblate to run
msgmerge on the languages whenever pulling in new changes from git.

The pot file will have to be the full content including the source
locations, so this is going to result in unpleasant diffs when it
is updated periodically.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-06-04 11:18:35 +01:00
Daniel P. Berrangé
35d68db5b1 po: stop stripping non-translated strings from po files
We previously adopted a minimization technique for po files which
stripped source locations and non-translated msgids in order to save
space in the git repos and have saner commit diffs.

At this time it is not possible to integrate with weblate while having
non-translated msgids stripped, as it will immediately add them back
again.

By keeping all non-translated msgids, our .po files are about x2 the
size at 37 MB vs the original 18 MB. This is still way better than the
original po/ directory which was 109 MB. We're saving 38 MB by still
omitting source file locations, and another 34 MB are saved by the
dropping of all languages which are 100% untranslated.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-06-04 11:18:35 +01:00
Daniel P. Berrangé
737cadff77 po: generate .pot file with strings in alphabetical order
The .po files are stored with strings in alphabetical order instead of
source file location order, because this minimizes the diffs created
when code moves around within or between files.

By default msgmerge will honour the order of strings in the .pot file
when creating a .po file, so it is useful if we also create the .pot
file with desired ordering.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-06-04 11:18:35 +01:00
Daniel P. Berrangé
59e6bf203a po: rename the .mini.po files to have just a .po suffix
A .mini.po file is exactly the same format as a .po file. We just used
the alternative extension as we wanted to be able to store both full and
minimized forms in the same directory.

This complicates integration with some translation tools, however, which
only really expect to see $LANG.po as a filename.

With this change we drop the rules for creating non-minimized po files,
and thus the po/*.po are always minimized. A useful side effect is that
we no longer run msgmerge during creation of the gmo files, and thus
don't need to have a date override to get reproducible builds.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-06-04 11:18:35 +01:00
Daniel P. Berrangé
0381b528fa po: refresh to drop unused translations
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-06-04 11:18:35 +01:00
Daniel P. Berrangé
c13e24b878 po: delete empty translations
There is no need to keep .po files which are 100% untranslated in
git. New languages can be added on demand.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-06-04 11:18:35 +01:00
Daniel P. Berrangé
aeb5f54df9 po: switch to using LINGUAS file for list of languages
To enable translation management systems to add new languages they need
to be able to modify the supported language list. The LINGUAS file is a
simple standard format that can be used for the language list, as this
is easier than modifying make variables.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-06-04 11:18:34 +01:00
Daniel P. Berrangé
681fd17782 vbox: remove unused support for Windows MSCOM
Long ago we switched the vbox driver to run inside libvirtd to avoid
libvirt.so being polluted with GPLv2-only code. Since libvirtd is not
built on Windows, we disabled vbox on Windows builds. Thus the MSCOM
glue code is not required.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-04-20 11:34:59 +01:00
Andrea Bolognani
818652619d Convert all remaining Markdown files to reStructuredText
We've adopted reStructuredText as the primary markup language for
our documentation and, given that both GitLab and GitHub can render
documents in this format just fine, it makes sense to get rid of
the few last remaining bits of Markdown and standardize on
reStructuredText across the board.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-04-14 16:29:04 +02:00
Daniel Henrique Barboza
906fddf733 qemu: move qemuDomainDefValidateFeatures to qemu_validate.c
This patch introduces a new file to host domain validations from
the QEMU driver. And to get things started, let's move
qemuDomainDefValidateFeatures() to this new file.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-04-03 16:25:30 +02:00
Rafael Fonseca
fc5925f1e0 util: introduce shared daemon startup code
Several daemons have similar code around general daemon startup code.
Let's move it into a file and share it among them.

Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-03-27 16:22:49 +01:00
Marc-André Lureau
8ef82dec5c qemu: add a DBus daemon helper unit
Add a unit to start & stop a private dbus-daemon.

The daemon is meant to be started on demand, and associated with a
QEMU process. It should be stopped when the QEMU process is stopped.

The current policy is permissive like a session bus. Stricter
policies can be added later, following recommendations from:
https://git.qemu.org/?p=qemu.git;a=blob;f=docs/interop/dbus.rst

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-03-24 15:57:33 +01:00
Marc-André Lureau
62f696c333 qemu: remove dbus-vmstate code
This code was based on a per-helper instance and peer-to-peer
connections. The code that landed in qemu master for v5.0 is relying
on a single instance and DBus bus.

Instead of trying to adapt the existing dbus-vmstate code, let's
remove it and resubmit. That should make reviewing easier.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-03-24 15:57:33 +01:00
Rafael Fonseca
8ffc7e9190 util: remove virKeyFile
The functionality is now provided by glib's GKeyFile.

Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-03-23 15:36:02 +01:00
Daniel P. Berrangé
5c146f6e57 src: introduce an abstraction for running event loops
We want a way to easily run a private GMainContext in a
thread, with correct synchronization between startup
and shutdown of the thread.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-03-11 14:44:04 +00:00
Michal Privoznik
9fe6c1dc7f virbpf: Set errno instead of reporting errors
The virbpf module wraps syscalls to BPF. However, if the kernel
headers used at the compile time don't have support for BPF the
module offers stubs which return a negative one to signal error
to the caller. But there is a slight discrepancy between real
functions and these stubs. While the former set errno and return
-1 the latter report an error (without setting the errno) and
return -1. This is not optimal because the caller might see stale
errno and overwrite the error message with a less accurate one.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-03-10 17:10:57 +01:00
Ján Tomko
f0f986efa8 qemu: add code for handling virtiofsd
Start virtiofsd for each <filesystem> device using it.

Pre-create the socket for communication with QEMU and pass it
to virtiofsd.

Note that virtiofsd needs to run as root.

https://bugzilla.redhat.com/show_bug.cgi?id=1694166

Introduced by QEMU commit a43efa34c7d7b628cbf1ec0fe60043e5c91043ea

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
2020-03-04 12:08:50 +01:00
Ján Tomko
25c29ac2f5 virclosecallbacks: move to src/hypervisor
Just like virhostdev, this depends on domain_conf and
it's shared by multiple hypervisor drivers.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-02-24 16:47:21 +01:00
Ján Tomko
a504a3c377 virhostdev: move to src/hypervisor
This module depends on domain_conf and is used directly by various
hypervisor drivers.

Move it to src/hypervisor.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-02-24 16:47:21 +01:00
Daniel Henrique Barboza
ac87d3520a domain_cgroup.c: add virDomainCgroupSetupDomainBlkioParameters()
After the introduction of virDomainDriverMergeBlkioDevice() in a
previous patch, it is now clear that lxcDomainSetBlkioParameters() and
qemuDomainSetBlkioParameters() uses the same loop to set cgroup
blkio parameter of a domain.

Avoid the repetition by adding a new helper called
virDomainCgroupSetupDomainBlkioParameters().

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-02-23 14:02:24 +01:00
Daniel Henrique Barboza
8595948bc8 src/hypervisor: introduce domain_driver.c
lxcDomainMergeBlkioDevice() and qemuDomainMergeBlkioDevice()
are the same functions. This duplicated code can't be put in
the existing domain_cgroup.c since it's not cgroup related.

This patch introduces a new src/hypervisor/domain_driver.c to
host this more generic code that can be shared between virt
drivers. This new file is then used to create a new helper
called virDomainDeivceMergeBlkioDevice() to eliminate the code
repetition mentioned above. Callers in LXC and QEMU files
were updated.

This change is a preliminary step for more code reduction of
cgroup related code inside lxcDomainSetBlkioParameters() and
qemuDomainSetBlkioParameters().

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-02-23 14:02:23 +01:00
Daniel P. Berrangé
55fe8110af util: delete the poll() based event loop impl
It is no longer require since switching to the GLib based
event loop impl.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-02-07 15:03:54 +00:00
Daniel P. Berrangé
3d63a187ba bootstrap: remove 18 more gnulib modules
* chown: use is conditionally compiled
* configmake: functionality imported to Makefile.am
* getaddrinfo: we have no portability problems
  with Windows impl
* getpass: simplified impl is imported
* mgetgroups: getgrouplist is used directly
* net_if: header includes are conditionalized
* netdb: header includes are conditionalized
* passfd: simplified impl is imported
* posix-shell: functionality was unused & removed
* sigaction: usage is conditionalized
* sigpipe: usage is conditionalized
* stat-time: struct stat is used directly
* strchrnul: usage is eliminated
* strtok_r: usage is not a portability problem
* sys_stat: usage is conditionalized
* uname: rewritten to use native Win32 function to
  get host arch
* waitpid: usage is conditionalized
* wcwidth: rewritten using g_unichar APIs

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:40 +00:00
Pavel Hrdina
894556ca81 secret: move virSecretGetSecretString into virsecret
The function virSecretGetSecretString calls into secret driver and is
used from other hypervisors drivers and as such makes more sense in
util.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-17 15:52:37 +01:00
Michal Privoznik
7f0b2f2162 po: Fix indentation of SED_PO_FIXUP_ARGS variable
The variable value is split on multiple lines, which have too
long indentation prefix leading to needless long lines.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2020-01-07 17:36:59 +01:00
Pavel Hrdina
207d38f7a2 po/Makefile.am: use SOURCE_DATE_EPOCH to set POT creation date
When building RPMs for libvirt the PO files are part of libvirt-libs
package.  Now that we generate libvirt.pot during build time the POT
creation date is also generated at that time.

The issue here is that when building libvirt-libs for x86_64 and i686
the generated libvirt.pot file will have different POT creation date
which affects installed PO files as well which leads to conflict when
installing both x86_64 and i686 packages.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-07 15:57:08 +01:00
Cole Robinson
f854e051b9 Remove phyp driver
The phyp driver was added in 2009 and does not appear to have had any
real feature change since 2011. There's virtually no evidence online
of users actually using it. IMO it's time to kill it.

This was discussed a bit in April 2016:
https://www.redhat.com/archives/libvir-list/2016-April/msg01060.html

Final discussion is here:
https://www.redhat.com/archives/libvir-list/2019-December/msg01162.html

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-12-20 12:25:42 -05:00
Daniel P. Berrangé
2e07a1e146 event: add API for requiring an event loop impl to be registered
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-18 14:04:59 +00:00
Michal Privoznik
b1e19ca36d util: Introduce virNVMeDevice module
This module will be used by virHostdevManager and it's inspired
by virPCIDevice module. They are very similar except instead of
what makes a NVMe device: PCI address AND namespace ID. This
means that a NVMe device can appear in a domain multiple times,
each time with a different namespace.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-12-17 10:04:43 +01:00
Daniel P. Berrangé
fc3d777b0f po: refresh translations from zanata
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-16 17:09:03 +00:00
Peter Krempa
a1521f84a5 qemu: Implement backup job APIs and qemu handling
This allows to start and manage the backup job.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-12-10 12:41:58 +01:00
Eric Blake
c15b0cd601 backup: Implement virsh support for backup
Introduce virsh commands for performing backup jobs.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-12-10 12:41:56 +01:00
Eric Blake
02f790ffbe backup: Parse and output backup XML
Accept XML describing a generic block job, and output it again as
needed. This may still need a few tweaks to match the documented XML
and RNG schema.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-12-10 12:41:56 +01:00
Ján Tomko
dd01eb4fd1 bootstrap: remove regex module
Now that we use GRegex everywhere, there is no need for this module.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2019-11-20 13:30:55 +01:00
Pavel Hrdina
48423a0b5d vircgroup: introduce virCgroupV2DevicesAttachProg
This function loads the BPF prog with prepared map into kernel and
attaches it into guest cgroup.  It can be also used to replace existing
program in the cgroup if we need to resize BPF map to store more rules
for devices. The old program will be closed and removed from kernel.

There are two possible ways how to create BPF program:

    - One way is to write simple C-like code which can by compiled into
      BPF object file which can be loaded into kernel using elfutils.

    - The second way is to define macros which look like assembler
      instructions and can be used directly to create BPF program that
      can be directly loaded into kernel.

Since the program is not too complex we can use the second option.

If there is no program, all devices are allowed, if there is some
program it is executed and based on the exit status the access is
denied for 0 and allowed for 1.

Our program will follow these rules:

    - first it will try to look for the specific key using major and
      minor to see if there is any rule for that specific device

    - if there is no specific rule it will try to look for any rule that
      matches only major of the device

    - if there is no match with major it will try the same but with
      minor of the device

    - as the last attempt it will try to look for rule for all devices
      and if there is no match it will return 0 to deny that access

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-15 12:58:05 +01:00
Pavel Hrdina
07946d6e39 util: introduce virbpf helpers
In order to implement devices controller with cgroup v2 we need to
add support for BPF programs, cgroup v2 doesn't have devices controller.

This introduces required helpers wrapping linux syscalls.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-15 12:58:00 +01:00
Michal Privoznik
070d6969fe virhostuptime: Add linux stub for musl
When we want to know the boot timestamp of the host, we can call
virHostGetBootTime(). Under the hood, it uses getutxid() which is
defined by POSIX and properly check for in configure. However,
musl took a path where it declares the function but instead of
providing any useful implementation it returns NULL meaning "no
record found". If that's the case, use our second best option -
/proc/uptime and a bit of maths.

https://bugzilla.redhat.com/show_bug.cgi?id=1760885

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-11-14 15:20:38 +01:00
Pavel Hrdina
4753fd0553 src: remote: generate source files into build directory
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-11-08 17:07:57 +01:00
Pavel Hrdina
d6be9e7f65 src: admin: generate source files into build directory
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-11-08 17:07:57 +01:00
Pavel Hrdina
b98f90cf91 src: access: generate source files into build directory
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-11-08 17:07:57 +01:00
Pavel Hrdina
afd89b1135 po: README.md: add a note about which Zanata client is required
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-11-08 17:07:57 +01:00
Pavel Hrdina
8beb7fdd0e po: rewrite the way how we generate files
There was no need to handle files for translation from build directory
but that will change with following patches where we will stop
generating source files into source directory.

In order to have them included for translation we have to prefix each
file with SRCDIR or BUILDDIR.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-11-08 17:07:57 +01:00
Pavel Hrdina
8c9ca8a284 po: generate files into build directory
Historically we did not support VPATH builds and everything was
generated into source directory.  The introduction of VPATH builds
did not changed the way how our translation files are handled.

This patch changes the rules to generate everything into build
directory and stops distributing generated files in order to have
properly separated VPATH builds.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-11-08 17:07:51 +01:00
Pavel Hrdina
c647107922 syntax-check.mk: fix sc_po_check rule
Commit <22d8e27ccd5faf48ee2bf288a1b9059aa7ffd28b> introduced our
syntax-check.mk file based on gnulib rules. However, the rule was
completely ignored as we don't have POTFILES.in file.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-11-08 17:07:50 +01:00
Pavel Hrdina
3097282d86 build: move admin code into admin directory
There is no need to have the libvirt-admin.so library definition in the
src directory.  In addition the library uses directly code from admin
sub-directory so move the remaining bits there as well.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-10-23 14:30:58 +02:00
Daniel P. Berrangé
b2c2a3ae91 build-aux: rewrite po file minimizer in Python
As part of an goal to eliminate Perl from libvirt build tools,
rewrite the minimize-po.pl tool in Python.

This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.

Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-10-18 13:54:03 +01:00
Daniel P. Berrangé
c2219efd06 po: refresh translations from zanata
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-10-18 13:57:53 +01:00
Daniel P. Berrangé
de3c1d2f53 build: drop the getopt-posix gnulib module
The getopt-posix module fixes a problem with optind being incorrectly
set after a failed option parse. It was also previously used to allow
the bhyve driver to access a private internal reentrant getopt impl.
None of this matters to libvirt code any more.

This partially reverts

  commit b436a8ae5c
  Author: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
  Date:   Thu Jun 9 00:50:35 2016 +0000

    gnulib: add getopt module

Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-10-07 11:34:24 +01:00
Jim Fehlig
2171442d62 xenapi: remove driver
The xenapi driver has not seen any development since its initial
contribution 9 years ago. There have been no bug reports, no patches,
and no queries about the driver on the developer or user mailing lists.
Remove the driver from the libvirt sources.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-03 15:37:54 -06:00
Jim Fehlig
ecc4d75d01 xenconfig: move contents to libxl driver and remove directory
After the legacy xen driver was removed the libxl driver became
the only consumer of xenconfig. Move the few files in xenconfig
to the libxl driver and remove the directory.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-08-26 11:06:12 -06:00
Daniel P. Berrangé
3bdca9273c po: refresh translations from zanata
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-30 12:43:31 +01:00
Eric Blake
689beaa47c backup: Implement virsh support for checkpoints
Introduce a bunch of new virsh commands for managing checkpoints in
isolation. More commands are needed for performing incremental
backups, but these commands were easy to implement by modeling heavily
after virsh-snapshot.c. There is no need for checkpoint-revert or
checkpoint-current since those snapshot APIs have no checkpoint
counterpart.  Similarly, it is not necessary to change which
checkpoint is current when redefining from XML, since until we
integrate checkpoints with snapshots, there is only a linear chain
(and you can deduce the current checkpoint by instead using
'checkpoint-list --leaves').  Other aspects of checkpoint-list are
also a bit simpler than the snapshot counterpart, in part because we
don't have to cater to back-compat to older API.

Upcoming patches will test these interfaces once the test driver
supports checkpoints.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-26 16:48:58 -05:00
Eric Blake
1a4df34a0f backup: Parse and output checkpoint XML
Add a new file checkpoint_conf.c that performs the translation to and
from new XML describing a checkpoint. The code shares a common base
class with snapshots, since a checkpoint similarly represents the
domain state at a moment in time. Add some basic testing of round trip
XML handling through the new code.

Of note - this code intentionally differs from snapshots in that XML
schema validation is unconditional, rather than based on a public API
flag.  We have many existing interfaces that still need to add a flag
for opt-in schema validation, but those interfaces have existing
clients that may not have been producing strictly-compliant XML, or we
may still uncover bugs where our RNG grammar is inconsistent with our
code (where omitting the opt-in flag allows existing apps to keep
working while waiting for an RNG patch).  But since checkpoints are
brand-new, it's easier to ensure the code matches the schema by always
using the schema.  If needed, a later patch could extend the API and
add a flag to turn on to request schema validation, rather than having
it forced (possibly just the validation of the <domain> sub-element
during REDEFINE) - but if a user encounters XML that looks like it
should be good but fails to validate with our RNG schema, they would
either have to upgrade to a new libvirt that adds the new flag, or
upgrade to a new libvirt that fixes the RNG schema, which implies
adding such a flag won't help much.

Also, the redefine flag requires the <domain> sub-element to be
present, rather than catering to historical back-compat to older
versions.

Signed-off-by: Eric Blake <eblake@redhat.com>
2019-07-26 16:48:58 -05:00
Eric Blake
0d44788fc3 backup: Introduce virDomainCheckpoint APIs
Introduce a bunch of new public APIs related to backup checkpoints.
Checkpoints are modeled heavily after virDomainSnapshotPtr (both
represent a point in time of the guest), although a snapshot exists
with the intent of rolling back to that state, while a checkpoint
exists to make it possible to create an incremental backup at a later
time.  We may have a future hypervisor that can completely manage
checkpoints without libvirt metadata, but the first two planned
hypervisors (qemu and test) both always use libvirt for tracking
metadata relations between checkpoints, so for now, I've deferred
the counterpart of virDomainSnapshotHasMetadata for a separate
API addition at a later date if there is ever a need for it.

Note that until we allow snapshots and checkpoints to exist
simultaneously on the same domain (although the actual prevention of
this will be in a separate patch for the sake of an easier revert down
the road), that it is not possible to branch out to create more than
one checkpoint child to a given parent, although it may become
possible later when we revert to a snapshot that coincides with a
checkpoint.  This also means that for now, the decision of which
checkpoint becomes the parent of a newly created one is the only
checkpoint with no child (so while there are APIs for dealing with a
current snapshot, we do not need those for checkpoints).  We may end
up exposing a notion of a current checkpoint later, but it's easier to
add stuff when proven needed than to blindly support it now and wish
we hadn't exposed it.

The following map shows the API relations to snapshots, with new APIs
on the right:

Operate on a domain object to create/redefine a child:
virDomainSnapshotCreateXML          virDomainCheckpointCreateXML

Operate on a child object for lifetime management:
virDomainSnapshotDelete             virDomainCheckpointDelete
virDomainSnapshotFree               virDomainCheckpointFree
virDomainSnapshotRef                virDomainCheckpointRef

Operate on a child object to learn more about it:
virDomainSnapshotGetXMLDesc         virDomainCheckpointGetXMLDesc
virDomainSnapshotGetConnect         virDomainCheckpointGetConnect
virDomainSnapshotGetDomain          virDomainCheckpointGetDomain
virDomainSnapshotGetName            virDomainCheckpiontGetName
virDomainSnapshotGetParent          virDomainCheckpiontGetParent
virDomainSnapshotHasMetadata        (deferred for later)
virDomainSnapshotIsCurrent          (no counterpart, see note above)

Operate on a domain object to list all children:
virDomainSnapshotNum                (no counterparts, these are the old
virDomainSnapshotListNames           racy interfaces)
virDomainSnapshotListAllSnapshots   virDomainListAllCheckpoints

Operate on a child object to list descendents:
virDomainSnapshotNumChildren        (no counterparts, these are the old
virDomainSnapshotListChildrenNames   racy interfaces)
virDomainSnapshotListAllChildren    virDomainCheckpointListAllChildren

Operate on a domain to locate a particular child:
virDomainSnapshotLookupByName       virDomainCheckpointLookupByName
virDomainSnapshotCurrent            (no counterpart, see note above)
virDomainHasCurrentSnapshot         (no counterpart, old racy interface)

Operate on a snapshot to roll back to earlier state:
virDomainSnapshotRevert             (no counterpart, instead checkpoints
                                     are used in incremental backups via
				     XML to virDomainBackupBegin)

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-26 16:48:58 -05:00
Peter Krempa
dd94cc2e71 po: Drop src/xenconfig/xen_sxpr.c from POTFILES
Commit 2f1c909991 forgot this change.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2019-07-09 11:32:19 +02:00
Peter Krempa
c7a8ccc040 util: Drop virsexpr module
There are no users any more.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-09 10:27:20 +02:00
Daniel P. Berrangé
e0c44300c4 Refresh translations from Zanata
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-01 19:02:08 +01:00
Daniel P. Berrangé
5a148ce846 remote: delete the avahi mDNS support
Libvirtd has long had integration with avahi for advertising libvirtd
using mDNS when TCP/TLS listening is enabled. For a long time the
virt-manager application had support for auto-detecting libvirtds
on the local network using mDNS, but this was removed last year

  commit fc8f8d5d7e3ba80a0771df19cf20e84a05ed2422
  Author: Cole Robinson <crobinso@redhat.com>
  Date:   Sat Oct 6 20:55:31 2018 -0400

    connect: Drop avahi support

    Libvirtd can advertise itself over avahi. The feature is disabled by
    default though and in practice I hear of no one actually using it
    and frankly I don't think it's all that useful

    The 'Open Connection' wizard has a disproportionate amount of code
    devoted to this feature, but I don't think it's useful or worth
    maintaining, so let's drop it

I've never heard of any other applications having support for using
mDNS to detect libvirtd instances. Though it is theoretically possible
something exists out there, it is clearly going to be a niche use case
in the virt ecosystem as a whole.

By removing avahi integration we can cut down the dependency chain for
the basic libvirtd install and reduce our code maint burden.

Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-06-21 12:59:42 +01:00
Peter Krempa
e8b505c956 qemu: Move qemuParseKeywords(Free) to the monitor code
The only user is now in qemu_monitor_json.c to re-parse the command line
format into keyvalue pairs for use in QMP command construction.

Move and rename the functions.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2019-06-20 12:15:05 +02:00
Daniel P. Berrangé
1851233d31 po: refresh translations from zanata
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-01-14 18:10:21 +00:00
Michal Privoznik
29682196d8 Drop UML driver
The driver is unmaintained, untested and severely broken for
quite some time now. Since nobody even reported any issue with it
let us drop it.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-17 17:52:46 +01:00
Daniel P. Berrangé
72d48f1891 Refresh translations from zanata
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-11-28 17:25:02 +00:00
Daniel P. Berrangé
7bda210e6d po: refresh translations from zanata
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-07-31 12:34:06 +01:00
Daniel P. Berrangé
3f4db69c2f po: don't install gmo files when --disable-nls is given
With --disable-nls is given we turn off use of gettext in the source
code, but mistakenly still installed the gmo files.

Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-06-05 17:36:42 +01:00
Daniel P. Berrangé
45f9905a3f po: delete bogus translations from various languages
For unknown reasons about 21 languages had the same 212 msgid entries
copied into the msgstr field without having any translation applied.
This bogus non-translated data has now been purged from Zanata.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-30 10:40:58 +01:00
Daniel P. Berrangé
fd4581ad1e Refresh translations to drop unused strings
Refresh transaltion po files to drop msgid/msgstr entries that are no
longer required due to deletion/refactoring of source code.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-30 10:40:58 +01:00
Daniel P. Berrangé
655df05500 po: attempt to fix srcdir != builddir builds
The .pot, .po and .gmo files are slightly unusual in that we generate
them in the srcdir when building form git. This is because they'll be
bundled in the tar archive, so a build-from-tar will see them in srcdir.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 14:52:51 +01:00
Daniel P. Berrangé
2b6ea81717 po: minimize language zu
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:20:00 +01:00
Daniel P. Berrangé
69ab5ce502 po: minimize language zh_TW
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:19:51 +01:00
Daniel P. Berrangé
c88abc93ad po: minimize language zh_HK
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:19:48 +01:00
Daniel P. Berrangé
7a8a84ecd1 po: minimize language zh_CN
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:19:37 +01:00
Daniel P. Berrangé
6e9b2d3982 po: minimize language yo
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:19:34 +01:00
Daniel P. Berrangé
dfe326b239 po: minimize language wba
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:19:31 +01:00
Daniel P. Berrangé
1d60d9d5ad po: minimize language vi
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:19:29 +01:00
Daniel P. Berrangé
70235923e9 po: minimize language ur
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:19:26 +01:00
Daniel P. Berrangé
da441e30b3 po: minimize language uk
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:19:24 +01:00
Daniel P. Berrangé
e2133c66c2 po: minimize language tw
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:19:21 +01:00
Daniel P. Berrangé
5f5f354cab po: minimize language tr
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:19:19 +01:00
Daniel P. Berrangé
35c9ddd2c4 po: minimize language th
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:19:16 +01:00
Daniel P. Berrangé
d0f61dce3d po: minimize language tg
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:19:14 +01:00
Daniel P. Berrangé
04261e683b po: minimize language te
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:19:12 +01:00
Daniel P. Berrangé
3ae2d1afdf po: minimize language ta
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:19:09 +01:00
Daniel P. Berrangé
e4863d547d po: minimize language sv
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:19:06 +01:00
Daniel P. Berrangé
5fce08ce18 po: minimize language sr
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:19:04 +01:00
Daniel P. Berrangé
0819df40d0 po: minimize language sr@latin
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:19:01 +01:00
Daniel P. Berrangé
6ff59ecd42 po: minimize language sq
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:18:59 +01:00
Daniel P. Berrangé
32bfe14efd po: minimize language sl
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:18:56 +01:00
Daniel P. Berrangé
6b6078fb59 po: minimize language sk
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:18:54 +01:00
Daniel P. Berrangé
9e31e2c523 po: minimize language si
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:18:51 +01:00
Daniel P. Berrangé
e37bb513bb po: minimize language ru
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:18:47 +01:00
Daniel P. Berrangé
395d8779a2 po: minimize language ro
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:18:45 +01:00
Daniel P. Berrangé
e30b355a28 po: minimize language pt
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:18:42 +01:00
Daniel P. Berrangé
b8213f9667 po: minimize language pt_BR
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:18:39 +01:00
Daniel P. Berrangé
14578e7913 po: minimize language pl
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:18:36 +01:00
Daniel P. Berrangé
0c9c5dc259 po: minimize language pa
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:18:33 +01:00
Daniel P. Berrangé
5fea85aacc po: minimize language or
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:18:30 +01:00
Daniel P. Berrangé
827a75d022 po: minimize language nso
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:18:27 +01:00
Daniel P. Berrangé
393c4dbe9d po: minimize language nn
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:18:24 +01:00
Daniel P. Berrangé
ffca88e48c po: minimize language nl
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:18:21 +01:00
Daniel P. Berrangé
2dc3ff5269 po: minimize language ne
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:18:19 +01:00
Daniel P. Berrangé
f25cf4bbaa po: minimize language nds
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:18:16 +01:00
Daniel P. Berrangé
277daec3f9 po: minimize language nb
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:18:14 +01:00
Daniel P. Berrangé
aa711c67bf po: minimize language my
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:18:11 +01:00
Daniel P. Berrangé
81c044937a po: minimize language ms
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:18:09 +01:00
Daniel P. Berrangé
2c9882e729 po: minimize language mr
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:18:04 +01:00
Daniel P. Berrangé
287e8e67d2 po: minimize language mn
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:18:01 +01:00
Daniel P. Berrangé
d6739dbfe9 po: minimize language ml
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:17:57 +01:00
Daniel P. Berrangé
2152abbb85 po: minimize language mk
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:17:54 +01:00
Daniel P. Berrangé
df602cb005 po: minimize language mai
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:17:51 +01:00
Daniel P. Berrangé
6487debe85 po: minimize language lv
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:17:48 +01:00
Daniel P. Berrangé
8546872d8d po: minimize language lt
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:17:46 +01:00
Daniel P. Berrangé
c42c81697e po: minimize language ky
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:17:43 +01:00
Daniel P. Berrangé
0c327eaa1c po: minimize language kw@uccor
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:17:40 +01:00
Daniel P. Berrangé
3c901b32bb po: minimize language kw
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:17:37 +01:00
Daniel P. Berrangé
5549fd04c9 po: minimize language kw@kkcor
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:17:34 +01:00
Daniel P. Berrangé
0c55984608 po: minimize language kw_GB
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:17:31 +01:00
Daniel P. Berrangé
e24c91382a po: minimize language ko
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:17:28 +01:00
Daniel P. Berrangé
520461aab7 po: minimize language kn
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:17:14 +01:00
Daniel P. Berrangé
47c3e4ba58 po: minimize language km
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:17:11 +01:00
Daniel P. Berrangé
980e5e06c2 po: minimize language kk
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:17:08 +01:00
Daniel P. Berrangé
0c82655ddb po: minimize language ka
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:17:06 +01:00
Daniel P. Berrangé
b7506ec47b po: minimize language ja
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:17:03 +01:00
Daniel P. Berrangé
ed328522f8 po: minimize language it
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:17:00 +01:00
Daniel P. Berrangé
fdb6db2391 po: minimize language is
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:16:50 +01:00
Daniel P. Berrangé
c1f6fbcdd7 po: minimize language ilo
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:16:48 +01:00
Daniel P. Berrangé
4a742166da po: minimize language id
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:16:45 +01:00
Daniel P. Berrangé
7b55350ddc po: minimize language ia
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:16:41 +01:00
Daniel P. Berrangé
8ab9d04290 po: minimize language hu
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:16:37 +01:00
Daniel P. Berrangé
83feb4fbaa po: minimize language hr
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:16:35 +01:00
Daniel P. Berrangé
5bb09356c0 po: minimize language hi
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:16:32 +01:00
Daniel P. Berrangé
1e060aafee po: minimize language he
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:16:29 +01:00
Daniel P. Berrangé
9120dfcc2b po: minimize language gu
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:16:26 +01:00
Daniel P. Berrangé
19dc2b5e0a po: minimize language gl
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:16:23 +01:00
Daniel P. Berrangé
59b61454b0 po: minimize language ga
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:16:20 +01:00
Daniel P. Berrangé
e7bb87ae0d po: minimize language fur
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:16:16 +01:00
Daniel P. Berrangé
8e9c220381 po: minimize language fr
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:16:12 +01:00
Daniel P. Berrangé
74b6ab04f3 po: minimize language fi
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:16:07 +01:00
Daniel P. Berrangé
2477971666 po: minimize language fil
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:16:04 +01:00
Daniel P. Berrangé
472ded5dc0 po: minimize language fa
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:16:01 +01:00
Daniel P. Berrangé
36545e85cf po: minimize language eu
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:15:58 +01:00
Daniel P. Berrangé
b4508a26c2 po: minimize language et
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:15:55 +01:00
Daniel P. Berrangé
2edb1d44c1 po: minimize language es
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:15:52 +01:00
Daniel P. Berrangé
bdc647404a po: minimize language eo
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:15:49 +01:00
Daniel P. Berrangé
5d224f2e4f po: minimize language en_GB
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:15:46 +01:00
Daniel P. Berrangé
c545d73f74 po: minimize language el
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:15:43 +01:00
Daniel P. Berrangé
07bb2d4df7 po: minimize language de
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:15:39 +01:00
Daniel P. Berrangé
c11ee734f0 po: minimize language de_CH
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:15:35 +01:00
Daniel P. Berrangé
a6c2d8543f po: minimize language da
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:15:31 +01:00
Daniel P. Berrangé
804d3ba6b8 po: minimize language cy
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-19 11:15:28 +01:00