When qemuDomainDeleteDevice() gets "DeviceNotFound" error it is a
special case as we're trying to remove a device which does not exists
any more. Such occasion is indicated by the return value -2.
Callers of the aforementioned function ought to base their behaviour on
the return value. However not all callers take as much care for the
return value as one could realistically anticipate.
Follow the usual direction of removing possible backend object (in case
of character devices), remove the device from its XML without waiting
for the device removal from QEMU (since it is already not there) and
basically follow the same algorithm as there is when the device was
removed, skipping over the wait for the device removal.
The overall return value also needs to be adjusted since
qemuDomainDeleteDevice() does not set an error on the -2 return value
and would otherwise trigger an unknown error being reported to the user
or management application.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When moving function and/or renaming them sometimes corresponding
change to corresponding header file is not done. This leaves us
with functions that are declared in header files, but nowhere
implemented. Drop such declarations.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function the comment is referring to is
virNetServerClientPrivNew() not virNetServerClintPrivNew(). The
latter doesn't even exist.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As requested on the libvirt users list I am adding this mention to the
apps page.
Reported-by: Erik Huelsmann <ehuels@gmail.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This switches to newer freebsd 14.1 and implements the new RUN_PIPELINE
behaviour introduced by Daniel.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When removing a socket in virCHMonitorClose() fails, a warning is
printed. But it doesn't contain errno nor g_strerror() which may
shed more light into why removing of the socket failed.
Oh, and since virCHMonitorClose() is registered as autoptr
cleanup for virCHMonitor() it may happen that virCHMonitorClose()
is called with mon->socketpath allocated but file not existing
yet (see virCHMonitorNew()). Thus ignore ENOENT and do not print
warning in that case - the file doesn't exist anyways.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virCHMonitorClose() is meant to be called when monitor to
cloud-hypervisor process closes. It removes the socket and frees
string containing path to the socket.
In general, there is a problem with the following pattern:
if (var) {
do_something();
g_free(var);
}
because if the pattern executes twice the variable is freed
twice. That's why we have VIR_FREE() macro. Well, replace plain
g_free() with g_clear_pointer(). Mind you, this is NOT a
destructor where clearing pointers is needless.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add some basic plumbing, based on the qemu driver.
Signed-off-by: John Levon <john.levon@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This should be better than the current for both hotplug:
error: internal error: Invalid target model for serial device
and hot-unplug:
error: An error occurred, but the cause is unknown
which should not be reached at all.
Resolves: https://issues.redhat.com/browse/RHEL-66222
Resolves: https://issues.redhat.com/browse/RHEL-66223
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
If QEMU supports multi boot device make use of it instead of using the
single boot device machine parameter.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Let us introduce the xml and reply files for QEMU 9.2.0 on s390x.
A QEMU at commit v9.1.0-1348-g11b8920ed2 was used to generate this data.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add capability QEMU_CAPS_VIRTIO_CCW_DEVICE_LOADPARM to detect multi boot
device support in QEMU by checking the virtio-blk-ccw device property
existence of loadparm.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Let me preface this with stating the obvious: documentation on
QoS in OVS is very sparse. This is all based on my observation
and OVS codebase analysis.
For the following QoS setting:
<bandwidth>
<inbound average="512" peak="1024" burst="32"/>
</bandwidth>
the following QoS setting is generated into OVS (NB, our XML
values are in KiB/s, OVS has them in bits/s):
# ovs-vsctl list qos
_uuid : a087226b-2da6-4575-ad4c-bf570cb812a9
external_ids : {ifname=vnet1, vm-id="7714e6b5-4885-4140-bc59-2f77cc99b3b5"}
other_config : {burst="262144", max-rate="8192000", min-rate="4096000"}
queues : {0=655bf3a7-e530-4516-9caf-ec9555dfbd4c}
type : linux-htb
from which the following topology is generated:
# for i in qdisc class; do tc -s -d -g $i show dev vnet1; done
qdisc htb 1: root refcnt 2 r2q 10 default 0x1 direct_packets_stat 0 ver 3.17 direct_qlen 1000
Sent 2186 bytes 16 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
+---(1:fffe) htb rate 8192Kbit ceil 8192Kbit linklayer ethernet burst 1499b/1mpu 60b cburst 1499b/1mpu 60b level 7
| Sent 2186 bytes 16 pkt (dropped 0, overlimits 0 requeues 0)
| backlog 0b 0p requeues 0
|
+---(1:1) htb prio 0 quantum 51200 rate 4096Kbit ceil 8192Kbit linklayer ethernet burst 32Kb/1mpu 60b cburst 32Kb/1mpu 60b level 0
Sent 2186 bytes 16 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Long story short, the default class (1:) for an OVS interface has
average and peak set exactly as requested. But since it's nested
under another class (1:fffe), it can borrow unused bandwidth. And
the parent is set to have rate = ceil = peak from our XML. From
[1]: htb_tc_install() calls htb_parse_qdisc_details__() which
sets: 'hc->min_rate = hc->max_rate;' and then calls
htb_setup_class_(..., tc_make_handle(1, 0xfffe), tc_make_handle(1, 0), &hc);
to set up the top parent class.
In other words - the interface is set up to so that it can always
consume 'peak' bandwidth and there is no way for us to set it up
differently. It's too late to deny setting 'peak' different to
'average' at XML validation phase so do the next best thing -
throw a warning, just like we do in case <bandwidth/> is set for
an unsupported <interface/> type.
1: https://github.com/openvswitch/ovs/blob/main/lib/netdev-linux.c#L5039
Resolves: https://issues.redhat.com/browse/RHEL-53963
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
If a Q35 domain has huge number of vCPUS (over 255, currently), then
it needs IOMMU with Extended Interrupt Mode enabled (see check in
qemuValidateDomainVCpuTopology()).
Well, we already add some devices and to other tricks when
parsing new domain XML. Might as well add IOMMU device if above
condition is met.
Resolves: https://issues.redhat.com/browse/RHEL-65844
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a Q35 domain has huge number of vCPUS (over 255, currently), then
it needs IOMMU with Extended Interrupt Mode enabled (see check in
qemuValidateDomainVCpuTopology()).
Well, we already add some devices and to other tricks when
parsing new domain XML. Might as well turn the EIM on for IOMMU
device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It only errors out when presented with a non-array, but we do check
it everywhere else.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In virJSONValueFromJsonC, the return value of virJSONValueFromJsonC
was not checked in one case.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In the rare case where int and long long are not the same size,
the multiplication of an int variable and an int constant might
overflow. Cast the constant to long long to avoid this.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: baa4edfb79
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
With upcoming v0.10 swtpm (commit
aa483aeb6d),
file locking with "lock" option is now supported and reflected in
"tpmstate-opt-lock" capability.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
When swtpm reports "nvram-backend-dir", it can accepts a single file or
block device where TPM state will be stored. --tpmstate must be
backend-uri=file://<path>.
Teach the storage to use custom directory or file source location.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
