Few places still used hardcoded limit for maximum XML size for commands
that accept XML files. The hardcoded limits ranged from 8k to 1M. Use
VSH_MAX_XML_FILE to express this limit in a unified way. This will bump
the limit for the commands that used hardcoded string lengths to 10M.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1152427
Fix info in the command definition of allocpages, which is currently
pointing info for 'capabilities'.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
When libvirt-guests is configured to start guests on host
boot, it is possible for guests start and read the host
clock before it is synchronized. Services such as
libvirt-guests that require correct time should use the
Special Passive System Unit time-sync.target
http://www.freedesktop.org/software/systemd/man/systemd.special.html#time-sync.target
This new event will use typedParameters to expose what has been actually
updated and the reason is that we can in the future extend any tunable
values or add new tunable values. With typedParameters we don't have to
worry about creating some other events, we will just use this universal
event to inform user about updates.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The unit of '--pagesize' of freepages is kibibytes.
https://bugzilla.redhat.com/show_bug.cgi?id=1145048
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
RDMA Live migration requires registering memory with the hardware, and
thus QEMU offers a new 'capability' to pre-register / mlock() the guest
memory in advance for higher RDMA performance before the migration
begins. This capability is disabled by default, which means QEMU will
register the memory with the hardware in an on-demand basis.
This patch exposes this capability with the following example usage:
virsh migrate --live --rdma-pin-all --migrateuri rdma://hostname domain qemu+ssh://hostname/system
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
RDMA migration uses the 'setup' state in QEMU to optionally lock
all memory before the migration starts. The total time spent in
this state is exposed as VIR_DOMAIN_JOB_SETUP_TIME.
Additionally, QEMU also exports migration throughput (mbps) for both
memory and disk, so let's add them too: VIR_DOMAIN_JOB_MEMORY_BPS,
VIR_DOMAIN_JOB_DISK_BPS.
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Clean up all _virDomainMemoryStat.
Signed-off-by: James <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Clean up all _virDomainBlockStats.
Signed-off-by: James <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Clean up all _virDomainInterfaceStats.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Add an iothread parameter to allow attaching to an IOThread, such as:
virsh attach-disk $dom $source $target --live --config --iothread 2 \
--targetbus virtio --driver qemu --subdriver raw --type disk
Coverity complained that checking the return of virDomainCreate()
was not consistent amongst the callers - so added the return check
to the objecteventtest.c and adjust the virt-login-shell to compare
< 0 rather than just non zero for the failure condition.
Coverity complains that on the first pass through the for loop that
'params' cannot be true, thus the ternary setting to "&" cannot be
done. Since we can only ever get to this point once, drop the ternary
When a domain is undefined, there are options to remove it's
managed save state or snapshots. However, there's another file
that libvirt creates per domain: the NVRAM variable store file.
Make sure that the file is not left behind if the domain is
undefined.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Coverity notes that after we VIR_ALLOC_N(params, nparams) a failed call to
virDomainGetCPUStats could result in nparams being set to -1. In that case,
the subsequent virTypedParamsFree in cleanup will pass -1 which isn't good.
Use the returned value as the number of stats to display in the loop as
it will be the value reported from the hypervisor and may be less than
nparams which is OK
Signed-off-by: John Ferlan <jferlan@redhat.com>
Coverity points out that if 'dom' isn't returned from virDomainQemuAttach,
then the code already jumps to cleanup, so there was no need for the
subsequent if (dom != NULL) check.
I moved the error message about failure into the goto cleanup on failure
and then removed the if (dom != NULL)
Signed-off-by: John Ferlan <jferlan@redhat.com>
Coverity points out that by using EMPTYSTR(type) we are guarding against
the possibility that it could be NULL; however, based on how 'type' was
initialized to NULL, then using nested ternary if-then-else's (?:?:)
setting either "ipv4", "ipv6", or "" - there is no way it could be NULL.
Since "-" is supposed to mean something empty in a field - modify the
nested ternary to an easier to read/process if-then-else leaving the
initialization to NULL to mean "-" in the formatted output.
Also changed the name from 'type' to 'typestr'.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since 0766783abb
Coverity complains that the EDIT_FREE definition results in DEADCODE.
As it turns out with the change to use the EDIT_FREE macro the call to
vir*Free() wouldn't be necessary nor would it happen...
Prior code to above commitid would :
vir*Ptr foo = NULL;
...
foo = vir*GetXMLDesc()
...
vir*Free(foo);
foo = vir*DefineXML()
...
And thus the free was needed. With the change to use EDIT_FREE the
same code changed to:
vir*Ptr foo = NULL;
vir*Ptr foo_edited = NULL;
...
foo = vir*GetXMLDesc()
...
if (foo_edited)
vir*Free(foo_edited);
foo_edited = vir*DefineXML()
...
However, foo_edited could never be set in the code path - even with
all the goto's since the only way for it to be set is if vir*DefineXML()
succeeds in which case the code to allow a retry (and thus all the goto's)
never leaves foo_edited set
All error paths lead to "cleanup:" which causes both foo and foo_edited
to call the respective vir*Free() routines if set.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Tweak the messages so that they mention "title" rather than
"description" when operating in title mode. Also fixes one missing "%s"
before non-formatted gettext message.
Before:
$ virsh desc --title dom
No description for domain: dom
After:
$ virsh desc --title dom
No title for domain: dom
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140034
Total time of a migration and total downtime transfered from a source to
a destination host do not count with the transfer time to the
destination host and with the time elapsed before guest CPUs are
resumed. Thus, source libvirtd remembers when migration started and when
guest CPUs were paused. Both timestamps are transferred to destination
libvirtd which uses them to compute total migration time and total
downtime. Obviously, this requires the time to be synchronized between
the two hosts. The reported times are useless otherwise but they would
be equally useless if we didn't do this recomputation so don't lose
anything by doing it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The parser accepts P and E, so the formatter should too.
* tools/virsh.c (vshPrettyCapacity): Handle larger units.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit c1d75de caused this warning on 32-bit platforms (fatal when
-Werror is enabled):
virsh-domain.c: In function 'cmdBlockCopy':
virsh-domain.c:2003:17: error: comparison is always false due to limited range of data type [-Werror=type-limits]
Forcing the left side of the < to be ull instead of ul shuts up
the 32-bit compiler while still protecting 64-bit code from overflow.
* tools/virsh-domain.c (cmdBlockCopy): Add type coercion.
Signed-off-by: Eric Blake <eblake@redhat.com>
Expose the new power of virDomainBlockCopy through virsh (well,
all but the finer-grained bandwidth, as that is its own can of
worms for a later patch). Continue to use the older API where
possible, for maximum compatibility.
The command now requires either --dest (with optional --format
and --blockdev), to directly describe the file destination, or
--xml, to name a file that contains an XML description such as:
<disk type='network'>
<driver type='raw'/>
<source protocol='gluster' name='vol1/img'>
<host name='red'/>
</source>
</disk>
[well, it may be a while before the qemu driver is actually patched
to act on that particular xml beyond just parsing it, but the virsh
interface won't need changing at that time]
Non-zero option parameters are converted into virTypedParameters,
and if anything requires the new API, the command can synthesize
appropriate XML even if the --dest option was used instead of --xml.
The existing --raw flag remains for back-compat, but the preferred
spelling is now --format=raw, since the new API now allows us
to specify all formats rather than just a boolean raw to suppress
probing.
I hope I did justice in describing the effects of granularity and
buf-size on how they get passed through to qemu.
* tools/virsh-domain.c (cmdBlockCopy): Add new options --xml,
--granularity, --buf-size, --format. Make --raw an alias for
--format=raw. Call new API if new parameters are in use.
* tools/virsh.pod (blockcopy): Document new options.
Signed-off-by: Eric Blake <eblake@redhat.com>
I'm about to extend the capabilities of blockcopy. Hiding a few
common lines of implementation gets in the way of the new required
logic, and putting the new logic in the common implementation won't
benefit any of the other blockjob operations. Therefore, it is
simpler to just do the work inline. There should be no semantic
change in this patch.
* tools/virsh-domain.c (blockJobImpl): Move block copy guts...
(cmdBlockCopy): ...into their lone caller.
Signed-off-by: Eric Blake <eblake@redhat.com>
To date, anyone performing a block copy and pivot ends up with
the destination being treated as <disk type='file'>. While this
works for data access for a block device, it has at least one
noticeable shortcoming: virDomainGetBlockInfo() reports allocation
differently for block devices visited as files (the size of the
device) than for block devices visited as <disk type='block'>
(the maximum sector used, as reported by qemu); and this difference
is significant when trying to manage qcow2 format on block devices
that can be grown as needed.
Of course, the more powerful virDomainBlockCopy() API can already
express the ability to set the <disk> type. But a new API can't
be backported, while a new flag to an existing API can; and it is
also rather inconvenient to have to resort to the full power of
generating XML when just adding a flag to the older call will do
the trick. So this patch enhances blockcopy to let the user flag
when the resulting XML after the copy must list the device as
type='block'.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_REBASE_COPY_DEV):
New flag.
* src/libvirt.c (virDomainBlockRebase): Document it.
* tools/virsh-domain.c (opts_block_copy, blockJobImpl): Add
--blockdev option.
* tools/virsh.pod (blockcopy): Document it.
* src/qemu/qemu_driver.c (qemuDomainBlockRebase): Allow new flag.
(qemuDomainBlockCopy): Remember the flag, and make sure it is only
used on actual block devices.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Expose the new flag just added to virDomainGetBlockJobInfo.
With --raw, the presence or absence of --bytes determines which
flag to use in the single API call. Without --raw, the use of
--bytes forces an error if the server doesn't support it,
otherwise, the code tries to silently fall back to scaling the
MiB/s value.
My goal is to eventually also support --bytes in bandwidth mode;
but that's a bit further down the road (and needs a new API flag
added in libvirt.h first).
This changes the human output, but the previous patch added
raw output precisely so that we can have flexibility with the
human output. For this commit, I used qemu-monitor-command to
force an unusual bandwidth, but the same will be possible once
qemu implements virDomainBlockCopy:
Before:
Block Copy: [100 %] Bandwidth limit: 2 MiB/s
After:
Block Copy: [100 %] Bandwidth limit: 1048577 bytes/s (1.000 MiB/s)
The cache avoids having to repeatedly checking whether the flag
works when talking to an older server, when multiple blockjob
commands are issued during a batch session and the user is
manually polling for job completion.
* tools/virsh.h (_vshControl): Add a cache.
* tools/virsh.c (cmdConnect, vshReconnect): Initialize the cache.
* tools/virsh-domain.c (opts_block_job): Add --bytes.
* tools/virsh.pod (blockjob): Document this.
Signed-off-by: Eric Blake <eblake@redhat.com>
The current output of 'blockjob [--info]' is a single line
designed for human consumption; it's not very nice for machine
parsing. Furthermore, I have plans to modify the line in
response to the new flag for controlling bandwidth units.
Solve that by adding a --raw parameter, which outputs
information closer to the C struct.
$ virsh blockjob testvm1 vda --raw
type=Block Copy
bandwidth=1
cur=197120
end=197120
The information is indented, because I'd like for a later patch
to add a mode that iterates over all the vm's disks with status
for each; in that mode, each block name would be listed unindented
before information (if any) about that block.
Now that we have a raw mode, we can guarantee that it won't change
format over time. Any app that cares about parsing the output can
try --raw, and if it fails, know that it was talking to an older
virsh and fall back to parsing the human-readable format which had
not changed until now; meanwhile, when not using --raw, we have
freed future virsh to change the output to whatever makes sense.
My first change to human mode: this command now guarantees a line
is printed on successful use of the API, even when the API did
not find a current block job (consistent with the rest of virsh).
Bonus: https://bugzilla.redhat.com/show_bug.cgi?id=1135441
complained that this message was confusing:
$ virsh blockjob test1 hda --async --bandwidth 10
error: conflict between --abort, --info, and --bandwidth modes
even though the man page already documents that --async implies
abort mode, all because '--abort' wasn't present in the command
line. Since I'm adding another case where options are tied
to or imply a mode, I changed that error to:
error: conflict between abort, info, and bandwidth modes
* tools/virsh-domain.c (cmdBlockJob): Add --raw parameter; tweak
error wording.
* tools/virsh.pod (blockjob): Document it.
Signed-off-by: Eric Blake <eblake@redhat.com>
I have plans to make future enhancements to the job list mode,
which will be easier to do if the common blockJobImpl function
is not mixing a query command with multiple modify commands.
Besides, it just feels weird that all callers to blockJobImpl
had to supply both a bandwidth input argument (unused for info
mode) and an info output argument (unused for all other modes);
not to mention I just made similar cleanups on the libvirtd
side.
The only reason blockJobImpl returned int was because of info
mode returning -1/0/1 (all other job API are -1/0), so that
can also be cleaned up. No user-visible changes in this commit.
* tools/virsh-domain.c (blockJobImpl): Change signature and return
value. Drop info handling.
(cmdBlockJob): Handle info here.
(cmdBlockCommit, cmdBlockCopy, cmdBlockPull): Adjust callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add "domstats" command that excercises both of the new APIs depending if
you specify a domain list or not. The output is printed as a key=value
list of the returned parameters.
resolves https://bugzilla.redhat.com/show_bug.cgi?id=1132305:
The error message for an out-of-range argument was confusing:
virsh -k 9999999999
error: option --k requires a positive numeric argument
After this patch, it is:
error: Invalid value for option -k
Signed-off-by: Eric Blake <eblake@redhat.com>
While prepping for virDomainBlockJob patches, I found some dead code.
* tools/virsh-domain.c (blockJobImpl): Kill unused 'name'.
Signed-off-by: Eric Blake <eblake@redhat.com>
net-undefine doesn't only undefine an inactive network,
but also an active network(persistent), it just cannot
undefine a transient network.
Signed-off-by: Li Yang <liyang.fnst@cn.fujitsu.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
* tools/virsh.pod (migrate): Add --auto-converge flag
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
A possible fix to issue:
http://www.redhat.com/archives/libvir-list/2014-August/thread.html#00227
While doing migration on KVM host, found problem sometimes:
VM is already running on the target host and disappears from source
host, but 'virsh migrate' command line hangs, cannot exit normally.
If pressing "ENTER" key, it will exit.
The code hangs at tools/virsh-domain.c: cmdMigrate
->vshWatchJob->poll():
poll() is trying to select pipe_fd, which is used to receive message
from doMigrate thread. In debugging, found that doMigrate finishes
and at the end it does call safewrite() to write the retval ('0' or
'1') to pipe_fd, and the write is completed. But cmdMigrate poll()
cannot get the event. If pressing "ENTER" key, poll() can get the
event and select pipe_fd, then command line can exit.
In current code, authentication thread which is called by vshConnect
will use stdin, and at the same time, in cmdMigrate main process,
poll() is listening to stdin, that probably affect poll() to get
pipe_fd event. Better to move authentication before vshWatchJob. With
this change, above problem does not exist.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Implement ZFS storage backend driver. Currently supported
only on FreeBSD because of ZFS limitations on Linux.
Features supported:
- pool-start, pool-stop
- pool-info
- vol-list
- vol-create / vol-delete
Pool definition looks like that:
<pool type='zfs'>
<name>myzfspool</name>
<source>
<name>actualpoolname</name>
</source>
</pool>
The 'actualpoolname' value is a name of the pool on the system,
such as shown by 'zpool list' command. Target makes no sense
here because volumes path is always /dev/zvol/$poolname/$volname.
User has to create a pool on his own, this driver doesn't
support pool creation currently.
A volume could be used with Qemu by adding an entry like this:
<disk type='volume' device='disk'>
<driver name='qemu' type='raw'/>
<source pool='myzfspool' volume='vol5'/>
<target dev='hdc' bus='ide'/>
</disk>
This makes the paragaph about attach-interface more descriptive and
correct, adding in a few bits of information that were previously
missing, e.g. --script is only allowed for bridge interfaces of Xen
domains, target name is regenerated if it starts with vnet, mac
address will be autogenerated if not specified.
(I did this in response to an email asking why a script couldn't be
specified for a bridge interface of a qemu domain, and why an
interface of type='ethernet' couldn't be created with
attach-interface)
We parse the bandwidth rates as unsinged long long,
then try to fit them in VIR_TYPED_PARAM_UINT.
Report an error if they exceed UINT_MAX instead of
quietly using wrong values.
https://bugzilla.redhat.com/show_bug.cgi?id=1043735
https://bugzilla.redhat.com/show_bug.cgi?id=1072653
Upon successful upload of a volume, the target volume and storage pool
were not updated to reflect any changes as a result of the upload. Make
use of the existing stream close callback mechanism to force a backend
pool refresh to occur in a separate thread once the stream closes. The
separate thread should avoid potential deadlocks if the refresh needed
to wait on some event from the event loop which is used to perform
the stream callback.
Commit id '0e2d7305' modified the code to allow a negative value to be
supplied for the bandwidth argument of the various block virsh commands
and the migrate-setspeed; however, it failed to update the man page to
describe the "feature" whereby a very large value could be interpreted
by the hypervisor to mean maximum value allowed. Although initially
designed to handle a -1 value, the reality is just about any negative
value could be provided and essentially perform the same feature.
https://bugzilla.redhat.com/show_bug.cgi?id=1087104
Commit id 'c6212539' explicitly allowed a negative value to be used for
offset and length as a shorthand for the largest value after commit id
'f18c02ec' modified virStrToLong_ui() to essentially disallow a negative
value.
However, allowing a negative value for offset ONLY worked if the negative
value was -1 since the eventual lseek() does allow a -1 to mean the end
of the file. Providing other negative values resulted in errors such as:
$ virsh vol-download --pool default qcow3-vol2 /home/vm-images/raw \
--offset -2 --length -1000
error: cannot download from volume qcow3-vol2
error: Unable to seek /home/vm-images/qcow3-vol2 to 18446744073709551614: Invalid argument
$
Thus, it seems unreasonable to expect or allow a negative value for offset
since the only benefit is to lseek() to the end of the file and then only
take advantage of how the OS would handle such a seek. For the purposes of
upload or download of volume data, that seems to be a no-op. Therefore,
disallow a negative value for offset.
Additionally, modify the man page for vol-upload and vol-download to provide
more details regarding the valid values for both offset and length.
In many places we define a variable as a 'const char *' when in fact
we modify it just a few lines below. Or even free it. We should not do
that.
There's one exception though, in xenSessionFree() xenapi_utils.c. We
are freeing the xen_session structure which is defined in
xen/api/xen_common.h public header. The structure contains session_id
which is type of 'const char *' when in fact it should have been just
'char *'. So I'm leaving this unmodified, just noticing the fact in
comment.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Assign the value we're comparing:
(val = func()) < 0
instead of assigning the comparison value:
(val = func() < 0)
Both were introduced along with the code,
the TLS tests by commit bd789df in 0.9.4
net events by commit de87691 in 1.2.2.
Note that the event id type fix is a no-op:
vshNetworkEventIdTypeFromString can only return
-1 (failure) and the event is never used or
0 (the only possible event) and the value of 0 < 0 is still 0.
Snapshots and block-copy have a flag that forces qemu to re-use existing
file. Our docs weren't exactly clear on what the existing file should
contain for this to actually work.
Re-word the docs a bit to state that the file needs to be pre-created in
the desired format and the backing chain metadata needs to be set prior
to handing it over to qemu.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1084360
According to the code, 'virsh numatune' supports integers for
specifying --mode as well as the string definitions "strict",
"interleave", and "preferred". However, this possibility was not
documented anywhere, so this patch adds it to both the man page and
command help.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1085706
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Introduce flag for the block rebase API to allow the rebase operation to
leave the chain relatively addressed. Also adds a virsh switch to enable
this behavior.
Introduce flag for the block commit API to allow the commit operation to
leave the chain relatively addressed. Also adds a virsh switch to enable
this behavior.
Similary to cmdDetachDisk fetch the inactive definition when --config
is specified as the active may not contain the network interface
if it was plugged with --config.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1056902
https://bugs.gentoo.org/show_bug.cgi?id=508336
At wireshark, they have this promise to change public dissector APIs
only with minor version number change. Which they did when releasing
the version of 1.12.
Firstly, they've changed tvb_memdup() in
a0c53ffaa1bb46d8c9db2ec739401aa411c9790e so now it takes four arguments
instead of three. The new argument is placed at the very beginning of
the list of arguments and basically says the scope where we'd like to
allocate the memory. According to the documentation NULL should be the
default value.
Then, the tcp_dissect_pdus() signature changed too. Well, the function
that actually dissects reassembled packets as tcp_dissect_pdus()
reorder TCP packets into one big chunk and then calls a user function
to dissect the PDU at once. The change is dated back to
8081cf1d90397cbbb4404f9720595e1537ed5e14.
Then, WS_DLL_PUBLIC_NOEXTERN was replaced with WS_DLL_PUBLIC_DEF in
5d87a8c46171f572568db5a47c093423482e342f.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The rationale is to not duplicate code which is done in
packet-libvirt.h for instance. Moreover, this way we can drop
__attribute_((unused)) used int packet-libvirt.c in favor of
ATTRIBUTE_UNUSED.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The API is exposed under 'domcapabilities' command. Currently, with
the variety of drivers that libvirt supports, none of the command
arguments is obligatory, but all are optional instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
By default, the bus type is inferred from the style of the device
name('target' in this command), e.g. a device named 'sda' will
typically be exported using a SCSI bus. Actually, not only SCSI bus,
but USB/SATA bus also use this kind of device name. So add '--bus'
option for attach-disk command to allow user specify the target bus.
Signed-off-by: Yanbing Du <ydu@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of maintaining two very similar APIs, add the "@mac" parameter
to virNetworkGetDHCPLeases and kill virNetworkGetDHCPLeasesForMAC. Both
of those functions would return data the same way, so making @mac an
optional filter simplifies a lot of stuff.
The new VIR_CONNECT_COMPARE_CPU_FAIL_INCOMPATIBLE flag for
virConnectCompareCPU can be used to get an error
(VIR_ERR_CPU_INCOMPATIBLE) describing the incompatibility instead of the
usual VIR_CPU_COMPARE_INCOMPATIBLE return code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Let's just open the file right away and deal with errors. Moreover,
there's no reason to forbid logging to, e.g., a pipe.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Use virNetworkGetDHCPLeases and virNetworkGetDHCPLeasesForMAC in virsh.
The new feature supports the follwing methods:
1. Retrieve leases info for a given virtual network
2. Retrieve leases info for given network interface
tools/virsh-domain-monitor.c
* Introduce new command : net-dhcp-leases
Example Usage: net-dhcp-leases <network> [mac]
virsh # net-dhcp-leases --network default6
Expiry Time MAC address Protocol IP address Hostname Client ID or DUID
-------------------------------------------------------------------------------------------------------------------
2014-06-16 03:40:14 52:54:00:85:90:e2 ipv4 192.168.150.231/24 fedora20-test 01:52:54:00:85:90:e2
2014-06-16 03:40:17 52:54:00:85:90:e2 ipv6 2001:db8:ca2:2:1::c0/64 fedora20-test 00:04:b1:d8:86:42:e1:6a:aa:cf:d5:86:94:23:6f:94:04:cd
2014-06-16 03:34:42 52:54:00:e8:73:eb ipv4 192.168.150.181/24 ubuntu14-vm -
2014-06-16 03:34:46 52:54:00:e8:73:eb ipv6 2001:db8:ca2:2:1::5b/64 - 00:01:00:01:1b:30:c6:aa:52:54:00:e8:73:eb
tools/virsh.pod
* Document new command
src/internal.h
* Introduce new macro: EMPTYSTR
In the 404bac14 the @tmp variable was introduced. It's purpose is to
avoid typecasting when parsing --pagesize argument. However, if the
argument is not presented, tmp may be used uninitialized resulting in
bogus virNodeGetFreePages() API call:
virsh freepages --cellno 2
error: Failed to open file '/sys/devices/system/node/node2/hugepages/hugepages-4294967295kB/free_hugepages': No such file or directory
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 9e3efe53 broke the build under valgrind or clang, by writing
8 bytes through an allocation of 4 bytes. It also risks multiplication
overflow when mallocing (that's a pervasive problem that needs an
audit in the rest of the code, but we might as well fix this one while
we are here), and had a typo.
* tools/virsh-host.c (cmdFreepages): Avoid integer overflow and
undefined behavior.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add knobs to virsh to manage a 2-phase active commit of the top
layer, similar to knobs already present on blockcopy. While this
code will fail until later patches actually implement the new
knobs in the qemu driver, doing it now proves that the API is
usable and also makes it easier for testing the qemu changes as
they are made.
* tools/virsh-domain.c (cmdBlockCommit): Add --active, --pivot,
and --keep-overlay options, modeled after blockcopy.
(blockJobImpl): Support --active flag.
* tools/virsh.pod (blockcommit): Document new flags.
(blockjob): Mention 2-phase commit interaction.
Signed-off-by: Eric Blake <eblake@redhat.com>
When the block job event was first added, it was for block pull,
where the active layer of the disk remains the same name. It was
also in a day where we only cared about local files, and so we
always had a canonical absolute file name. But two things have
changed since then: we now have network disks, where determining
a single absolute string does not really make sense; and we have
two-phase jobs (copy and active commit) where the name of the
active layer changes between the first event (ready, on the old
name) and second (complete, on the pivoted name).
Adam Litke reported that having an unstable string between events
makes life harder for clients. Furthermore, all of our API that
operate on a particular disk of a domain accept multiple strings:
not only the absolute name of the active layer, but also the
destination device name (such as 'vda'). As this latter name is
stable, even for network sources, it serves as a better string
to supply in block job events.
But backwards-compatibility demands that we should not change the
name handed to users unless they explicitly request it. Therefore,
this patch adds a new event, BLOCK_JOB_2 (alas, I couldn't think of
any nicer name - but at least Migrate2 and Migrate3 are precedent
for a number suffix). We must double up on emitting both old-style
and new-style events according to what clients have registered for
(see also how IOError and IOErrorReason emits double events, but
there the difference was a larger struct rather than changed
meaning of one of the struct members).
Unfortunately, adding a new event isn't something that can easily
be broken into pieces, so the commit is rather large.
* include/libvirt/libvirt.h.in (virDomainEventID): Add a new id
for VIR_DOMAIN_EVENT_ID_BLOCK_JOB_2.
(virConnectDomainEventBlockJobCallback): Document new semantics.
* src/conf/domain_event.c (_virDomainEventBlockJob): Rename field,
to ensure we catch all clients.
(virDomainEventBlockJobNew): Add parameter.
(virDomainEventBlockJobDispose)
(virDomainEventBlockJobNewFromObj)
(virDomainEventBlockJobNewFromDom)
(virDomainEventDispatchDefaultFunc): Adjust clients.
(virDomainEventBlockJob2NewFromObj)
(virDomainEventBlockJob2NewFromDom): New functions.
* src/conf/domain_event.h: Add new prototypes.
* src/libvirt_private.syms (domain_event.h): Export new functions.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Generate two
different events.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Likewise.
* src/remote/remote_protocol.x
(remote_domain_event_block_job_2_msg): New struct.
(REMOTE_PROC_DOMAIN_EVENT_BLOCK_JOB_2): New RPC.
* src/remote/remote_driver.c
(remoteDomainBuildEventBlockJob2): New handler.
(remoteEvents): Register new event.
* daemon/remote.c (remoteRelayDomainEventBlockJob2): New handler.
(domainEventCallbacks): Register new event.
* tools/virsh-domain.c (vshEventCallbacks): Likewise.
(vshEventBlockJobPrint): Adjust client.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Peter's review of an early version of my addition of active block
commit pointed out some issues that I was copying from the block
copy code; fix them up now before perpetuating them.
For virsh commands that manage a single API call, it's nice to have
a 1:1 mapping of options to flags, so that we can test that
lower-layer software handles flag combinations correctly. But where
virsh is introducing syntactic sugar to combine multiple API calls
into a single user interface, we might as well make that interface
compact. That is, we should allow the shorter command-line of
'blockcopy $dom $disk --pivot' without having to explicitly specify
--wait, because this isn't directly a flag passed to a single
underlying API call.
Also, my use of embedded ?: ternaries bordered on unreadable.
* tools/virsh-domain.c (cmdBlockCopy): Make --pivot, --finish,
and --timeout imply --wait. Drop excess ?: operators.
* tools/virsh.pod (blockcopy): Update documentation.
Signed-off-by: Eric Blake <eblake@redhat.com>
The vcpupin command allowed specifying a negative number for the --vcpu
argument. This would the overflow when the underlying virDomainPinVcpu
API was called.
$ virsh vcpupin r7 -1 0
error: numerical overflow: input too large: 4294967295
Switch the vCPU variable to a unsigned int and parse it using the
corresponding function.
Also improve the vcpupin test to cover all the defects.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1101059
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
To follow the new semantics of the vshCommandOptToU* functions convert
this one to reject negative numbers too. To allow using -1 for "maximum"
semantics for the vol-*load two bandwidth functions that use this helper
introduce vshCommandOptULongLongWrap.
To follow the new semantics of the vshCommandOptToU* functions convert
this one to reject negative numbers too. To allow using -1 for "maximum"
semantics for the two bandwidth functions that use this helper introduce
vshCommandOptULWrap. Although currently the migrate-setspeed function
for the qemu driver will reject -1 as maximum.
Use virStrToLong_uip instead of virStrToLong_ui to reject negative
numbers in the helper. None of the callers expects the wraparound
"feature" for negative numbers.
Also add a function that allows wrapping of negative numbers as it might
be used in the future and be explicit about the new semantics in the
function docs.
the 'migration_host' description may be a bit difficult to
understand for some users, so enhance the manual
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Now that qemu 2.0 allows commit of the active layer, people are
attempting to use virsh blockcommit and getting into a stuck
state, because libvirt is unprepared to handle the two-phase
commit required by qemu.
Stepping back a bit, there are two valid semantics for a
commit operation:
1. Maintain a 'golden' base, and a transient overlay. Make
changes in the overlay, and if everything appears to work,
commit those changes into the base, but still keep the overlay
for the next round of changes; repeat the cycle as desired.
2. Create an external snapshot, then back up the stable state
in the backing file. Once the backup is complete, commit the
overlay back into the base, and delete the temporary snapshot.
Since qemu doesn't know up front which of the two styles is
preferred, a block commit of the active layer merely gets
the job into a synchronized state, and sends an event; then
the user must either cancel (case 1) or complete (case 2),
where qemu then sends a second event that actually ends the
job. However, until commit e6bcbcd, libvirt was blindly
assuming the semantics that apply to a commit of an
intermediate image, where there is only one sane conclusion
(the job automatically ends with fewer elements in the chain);
and getting stuck because it wasn't prepared for qemu to enter
a second phase of the job.
This patch adds a flag to the libvirt API that a user MUST
supply in order to acknowledge that they will be using two-phase
semantics. It might be possible to have a mode where if the
flag is omitted, we automatically do the case 2 semantics on
the user's behalf; but before that happens, I must do additional
patches to track the fact that we are doing an active commit
in the domain XML. Later patches will add support of the flag,
and once 2-phase semantics are working, we can then decide
whether to relax things to allow an omitted flag to cause an
automatic pivot.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_COMMIT_ACTIVE)
(VIR_DOMAIN_BLOCK_JOB_TYPE_ACTIVE_COMMIT): New enums.
* src/libvirt.c (virDomainBlockCommit): Document two-phase job
when committing active layer, through new flag.
(virDomainBlockJobAbort): Document that pivot also occurs after
active commit.
* tools/virsh-domain.c (vshDomainBlockJob): Cover new job.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Explicitly
reject active copy; later patches will add it in.
Signed-off-by: Eric Blake <eblake@redhat.com>
Report CPU affinities / online CPUs in human-readable form when
this flag is present:
Before:
CPU Affinity: y-yy
After:
CPU Affinity: 0,2-3 (out of 4)
https://bugzilla.redhat.com/show_bug.cgi?id=985980
Our public free functions explicitly don't accept NULL pointers
(sigh). Therefore, callers must do something like this:
if (dev)
virNodeDeviceFree(dev);
And we are not doing that on two places I've found. This leads to
dummy error message thrown by virsh:
virsh # nodedev-dumpxml nonexistent-device
error: Could not find matching device 'nonexistent-device'
error: invalid node device pointer in virNodeDeviceFree
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When looking up storage volumes virsh uses multiple lookup steps. Some
of the steps don't require a pool name specified. This resulted into a
possibility that a volume would be part of a different pool than the
user specified:
Let's have a /var/lib/libvirt/images/test.qcow image in the 'default'
pool and a second pool 'emptypool':
Currently we'd return:
$ virsh vol-info --pool emptypool /var/lib/libvirt/images/test.qcow
Name: test.qcow
Type: file
Capacity: 100.00 MiB
Allocation: 212.00 KiB
After the fix:
$ tools/virsh vol-info --pool emptypool /var/lib/libvirt/images/test.qcow
error: Requested volume '/var/lib/libvirt/images/test.qcow' is not in pool 'emptypool'
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1088667
Commit d5c86278 was incomplete; other functions also triggered
compiler warnings about collisions in the use of 'sync'.
* src/qemu/qemu_driver.c (qemuDomainSetTime): Fix another client.
* tools/virsh-domain-monitor.c (cmdDomTime): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The VIR_ENUM_DECL/VIR_ENUM_IMPL helper macros already append 'Type'
to the enum name being converted; it looks silly to have functions
with 'TypeType' in their name. Even though some of our enums have
to have a 'Type' suffix, the corresponding string conversion
functions do not.
* src/conf/secret_conf.h (VIR_ENUM_DECL): Rename virSecretUsageType.
* src/conf/storage_conf.h (VIR_ENUM_DECL): Rename
virStoragePoolAuthType, virStoragePoolSourceAdapterType,
virStoragePartedFsType.
* src/conf/domain_conf.c (virDomainDiskDefParseXML)
(virDomainFSDefParseXML, virDomainFSDefFormat): Update callers.
* src/conf/secret_conf.c (virSecretDefParseUsage)
(virSecretDefFormatUsage): Likewise.
* src/conf/storage_conf.c (virStoragePoolDefParseAuth)
(virStoragePoolDefParseSource, virStoragePoolSourceFormat):
Likewise.
* src/lxc/lxc_controller.c (virLXCControllerSetupLoopDevices):
Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskPartFormat): Likewise.
* src/util/virstorageencryption.c (virStorageEncryptionSecretParse)
(virStorageEncryptionSecretFormat): Likewise.
* tools/virsh-secret.c (cmdSecretList): Likewise.
* src/libvirt_private.syms (secret_conf.h, storage_conf.h): Export
corrected names.
Signed-off-by: Eric Blake <eblake@redhat.com>
These APIs are exposed under new virsh command 'domtime' which both gets
and sets (not at the same time of course :)).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For now, if only '--wipe-storage' is assigned, user can undefine a
domain normally. But actually '--wipe-storage' doesn't do anything,
and this may confuse user. Better is to require that '--wipe-storage'
only works if the user specifies volumes to be removed.
Before:
$ virsh undefine virt-tests-vm1 --wipe-storage
Domain virt-tests-vm1 has been undefined
After:
$ virsh undefine virt-tests-vm1 --wipe-storage
error: '--wipe-storage' requires '--storage <string>' or '--remove-all-storage'
Signed-off-by: Li Yang <liyang.fnst@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
In "src/conf/" there are many enumeration (enum) declarations.
Similar to the recent cleanup to "src/util" directory, it's
better to use a typedef for variable types, function types and
other usages. Other enumeration and folders will be changed to
typedef's in the future. Most of the files changed in this
commit are related to storage (storage_conf) enums.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 9976c4b9a6 broke the output for VNC
displays as the port number is converted to VNC display number by
subtracting 5900. This yields port 0 for the first display and thus the
output would be skipped.
Before:
$ virsh domdisplay VM
vnc://localhost
After:
$ tools/virsh domdisplay VM
vnc://localhost:0
The original comment of vshCmdInfo:
"name" - command name
Actually it's 'help' and the short description
of command, not the command name.
Signed-off-by: Li Yang <liyang.fnst@cn.fujitsu.com>
For now 'virsh quit' action like this:
--------------------------------
[root@localhost /]# virsh quit
[root@localhost /]#
--------------------------------
And 'virsh exit' action:
--------------------------------
[root@localhost /]# virsh exit
[root@localhost /]#
--------------------------------
There is a small difference('/n') between them.
According to manual said:
quit, exit
quit this interactive terminal
And in the code they all called cmdQuit func,
They should get same actions.
Signed-off-by: Li Yang <liyang.fnst@cn.fujitsu.com>
With this patch, all information related to a host resource in
a storage file backing chain now lives in util/virstoragefile.h.
The next step will be to consolidate various places that have
been tracking backing chain details to all use a common struct.
The changes to tools/Makefile.am were made necessary by the
fact that virstorageencryption includes uses of libxml, and is
now pulled in by inclusion from virstoragefile.h. No
additional libraries are linked into the final image, and in
comparison, the build of the setuid library in src/Makefile.am
already was using LIBXML_CFLAGS via AM_CFLAGS.
* src/conf/domain_conf.h (virDomainDiskSourceDef): Move...
* src/util/virstoragefile.h (virStorageSource): ...and rename.
* src/conf/domain_conf.c (virDomainDiskSourceDefClear)
(virDomainDiskAuthClear): Adjust clients.
* tools/Makefile.am (virt_login_shell_CFLAGS)
(virt_host_validate_CFLAGS): Add libxml headers.
Signed-off-by: Eric Blake <eblake@redhat.com>
'virsh help event' included a summary line "event - (null)"
due to a misnamed info field.
* tools/virsh-domain.c (info_event): Use correct name.
* tools/virsh-network.c (info_network_event): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Use 'virsh list domain --title' option can get domain's title,
not description, the original help information 'show short
domain description' will confuse users, so modify it to
'show domain title'
Signed-off-by: Li Yang <liyang.fnst@cn.fujitsu.com>
This patch adds "[--format] <string>" to "virsh dump --memory-only", which is
changed to use the new virDomainCoreDumpWithFormat API.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Busy enterprise workloads hosted on large sized VM's tend to dirty
memory faster than the transfer rate achieved via live guest migration.
Despite some good recent improvements (& using dedicated 10Gig NICs
between hosts) the live migration may NOT converge.
Recently support was added in qemu (version 1.6) to allow a user to
choose if they wish to force convergence of their migration via a
new migration capability : "auto-converge". This feature allows for qemu
to auto-detect lack of convergence and trigger a throttle-down of the
VCPUs.
This patch includes the libvirt support needed to trigger this
feature. (Testing is in progress)
Signed-off-by: Chegu Vinod <chegu_vinod@hp.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When listening for a subset of monitor events, it can be tedious
to register for each event name in series; nicer is to register
for multiple events in one go. Implement a flag to use regex
interpretation of the event filter.
While at it, prove how much I hate the shift key, by adding a
way to filter for 'shutdown' instead of 'SHUTDOWN'. :)
* include/libvirt/libvirt-qemu.h
(virConnectDomainQemuMonitorEventRegisterFlags): New enum.
* src/libvirt-qemu.c (virConnectDomainQemuMonitorEventRegister):
Document flags.
* tools/virsh-domain.c (cmdQemuMonitorEvent): Expose them.
* tools/virsh.pod (qemu-monitor-event): Document this.
* src/conf/domain_event.c
(virDomainQemuMonitorEventStateRegisterID): Add flags.
(virDomainQemuMonitorEventFilter): Handle regex, and optimize
client side.
(virDomainQemuMonitorEventCleanup): Clean up regex.
Signed-off-by: Eric Blake <eblake@redhat.com>
Any new API deserves a good virsh wrapper :)
qemu-monitor-event [<domain>] [<event>] [--pretty] [--loop] [--timeout <number>]
Very similar to the previous work on 'virsh event'. For an
example session:
$ virsh -c qemu:///system qemu-monitor-event --event SHUTDOWN&
$ virsh -c qemu:///system start f18-live
Domain f18-live started
$ virsh -c qemu:///system destroy f18-live
Domain f18-live destroyed
event SHUTDOWN at 1391212552.026544 for domain f18-live: (null)
events received: 1
[1]+ Done virsh -c qemu:///system qemu-monitor-event --event SHUTDOWN
$
* tools/virsh-domain.c (cmdQemuMonitorEvent): New command.
* tools/virsh.pod (qemu-monitor-event): Document it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We allow translation from no_bandwidth to has_bandwidth for a vnic.
However, going in the opposite direction is not implemented. It's not
limitation of the API rather than internal implementation. The problem
is, we correctly detect that user hasn't specified any outbound (say
he wants to clear out outbound). However, this gets overwritten by
current vnic outbound settings. Then, virNetDevBandwidthSet doesn't
change anything. We need to stop overwriting the outbound if users
don't want us to. Same applies for inbound.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit a1cbe4b5 added a check for spaces around assignments and this
patch extends it to checks for spaces around '=='. One exception is
virAssertCmpInt where comma after '==' is acceptable (since it is a
macro and '==' is its argument).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Introducing keepalive similarly to Guannan around 2 years ago. Since
we want to introduce keepalive for every connection, it makes sense to
wrap the connecting function into new virsh one that can deal
keepalive as well.
Function vshConnect() is now used for connecting and keepalive added
in that function (if possible) helps preventing long waits e.g. while
nework goes down during migration.
This patch also adds the options for keepalive tuning into virsh and
fails connecting only when keepalives are explicitly requested and
cannot be set (whether it is due to missing support in connected
driver or remote server). If not explicitely requested, a debug
message is printed (hence the addition to virsh-optparse test).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1073506
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=822839
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
vshRunConsole() uses virCondWait() which is a wrapper around
pthread_cond_wait(). On FreeBSD, pthread_cond_wait needs mutex to be
locked, otherwise it immediately fails with EPERM. On Linux, the
behaviour in this case is undefined.
So lock the mutex before calling virCondWait().
Coverity spotted that 'nfdlist' (ssize_t) could be -1, but that we
were using 'i' (size_t) to iterate over the list at cleanup, with
crashing results because it promotes to a really big unsigned number.
* tools/virt-login-shell.c (main): Avoid treating -1 as unsigned.
Signed-off-by: Eric Blake <eblake@redhat.com>
If a user specifies the pool explicitly, we should make sure to point
out that it's inactive instead of falling back to lookup by key/path and
failing at the end. Also if the pool isn't found there's no use in
continuing the lookup.
This changes the error in case the user-selected pool is inactive from:
$ virsh vol-upload --pool inactivepool --vol somevolname volcontents
error: failed to get vol 'somevolname'
error: Storage volume not found: no storage vol with matching path
somevolname
To a more descriptive:
$ virsh vol-upload --pool inactivepool --vol somevolname volcontents
error: pool 'inactivepool' is not active
And in case a user specifies an invalid pool from:
$ virsh vol-upload --pool invalidpool --vol somevolname volcontents
error: failed to get pool 'invalidpool'
error: failed to get vol 'somevolname', specifying --pool might help
error: Storage volume not found: no storage vol with matching path somevolname
To something less confusing:
$ virsh vol-upload --pool invalidpool --vol somevolname volcontents
error: failed to get pool 'invalidpool'
error: Storage pool not found: no storage pool with matching name 'invalidpool'
'virsh lxc-enter-namespace' does not have a way to reflect exit
status to the caller in single-command mode, but we might as well
at least report the exit status. Prior to this patch,
$ virsh -c lxc:/// lxc-enter-namespace shell /bin/sh 'exit 3'; echo $?
1
now it gives some details:
$ virsh -c lxc:/// lxc-enter-namespace shell /bin/sh -c 'exit 3'; echo $?
error: internal error: Child process (31557) unexpected exit status 3
1
Also useful:
$ virsh -c lxc:/// lxc-enter-namespace shell /bin/sh -c 'kill $$'; echo $?
error: internal error: Child process (31585) unexpected fatal signal 15
1
* tools/virsh-domain.c (cmdLxcEnterNamespace): Avoid magic numbers.
Dispatch any error.
* tools/virsh.pod: Document that non-zero exit status is collapsed.
Signed-off-by: Eric Blake <eblake@redhat.com>
virt-login-shell was exiting with status 0, regardless of what the
wrapped shell returned. This is unkind to users; we should behave
more like env(1), nice(1), su(1), and other wrapper programs, by
preserving the invoked application's status (which includes the
distinction between death due to signal vs. normal death).
* tools/virt-login-shell.c (main): Pass through child exit status.
* tools/virt-login-shell.pod: Document exit status.
Signed-off-by: Eric Blake <eblake@redhat.com>
Note that 'virsh lxc-enter-namespace' must double-fork, for two
reasons: some namespaces can only be done from a single thread,
while virsh is multithreaded; and because virsh can be run in
batch mode where we must not corrupt the namespace of that
execution upon return from the subsidiary command.
When virt-login-shell was first written, it blindly copied from
'virsh lxc-enter-namespace', including the double-fork. But
neither of the reasons for double forking apply to
virt-login-shell (we are single-threaded, and we have nothing to
do after the child completes that would require us to preserve a
namespace), so we can simplify life by using a single fork.
In turn, this will make it easier for a future patch to pass the
child's exit status on to the invoking shell.
In flattening to a single fork, note that closing the fds must
be done after fork, because the parent process still needs to
use fds to control the virConnectPtr; meanwhile, chdir can be
done prior to forking (in fact, it's easier to report errors
on anything attempted before forking).
* tools/virt-login-shell.c (main): Single rather than double fork.
(virLoginShellFini): Delete, by inlining actions instead.
Signed-off-by: Eric Blake <eblake@redhat.com>
The old semantics of virFork() violates the priciple of good
usability: it requires the caller to check the pid argument
after use, *even when virFork returned -1*, in order to properly
abort a child process that failed setup done immediately after
fork() - that is, the caller must call _exit() in the child.
While uses in virfile.c did this correctly, uses in 'virsh
lxc-enter-namespace' and 'virt-login-shell' would happily return
from the calling function in both the child and the parent,
leading to very confusing results. [Thankfully, I found the
problem by inspection, and can't actually trigger the double
return on error without an LD_PRELOAD library.]
It is much better if the semantics of virFork are impossible
to abuse. Looking at virFork(), the parent could only ever
return -1 with a non-negative pid if it misused pthread_sigmask,
but this never happens. Up until this patch series, the child
could return -1 with non-negative pid if it fails to set up
signals correctly, but we recently fixed that to make the child
call _exit() at that point instead of forcing the caller to do
it. Thus, the return value and contents of the pid argument are
now redundant (a -1 return now happens only for failure to fork,
a child 0 return only happens for a successful 0 pid, and a
parent 0 return only happens for a successful non-zero pid),
so we might as well return the pid directly rather than an
integer of whether it succeeded or failed; this is also good
from the interface design perspective as users are already
familiar with fork() semantics.
One last change in this patch: before returning the pid directly,
I found cases where using virProcessWait unconditionally on a
cleanup path of a virFork's -1 pid return would be nicer if there
were a way to avoid it overwriting an earlier message. While
such paths are a bit harder to come by with my change to a direct
pid return, I decided to keep the virProcessWait change in this
patch.
* src/util/vircommand.h (virFork): Change signature.
* src/util/vircommand.c (virFork): Guarantee that child will only
return on success, to simplify callers. Return pid rather than
status, now that the situations are always the same.
(virExec): Adjust caller, also avoid open-coding process death.
* src/util/virprocess.c (virProcessWait): Tweak semantics when pid
is -1.
(virProcessRunInMountNamespace): Adjust caller.
* src/util/virfile.c (virFileAccessibleAs, virFileOpenForked)
(virDirCreate): Likewise.
* tools/virt-login-shell.c (main): Likewise.
* tools/virsh-domain.c (cmdLxcEnterNamespace): Likewise.
* tests/commandtest.c (test23): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Right now, a caller waiting for a child process either requires
the child to have status 0, or must use WIFEXITED() and friends
itself. But in many cases, we want the middle ground of treating
fatal signals as an error, and directly accessing the normal exit
value without having to use WEXITSTATUS(), in order to easily
detect an expected non-zero exit status. This adds the middle
ground to the low-level virProcessWait; the next patch will add
it to virCommand.
* src/util/virprocess.h (virProcessWait): Alter signature.
* src/util/virprocess.c (virProcessWait): Add parameter.
(virProcessRunInMountNamespace): Adjust caller.
* src/util/vircommand.c (virCommandWait): Likewise.
* src/util/virfile.c (virFileAccessibleAs): Likewise.
* src/lxc/lxc_container.c (lxcContainerHasReboot)
(lxcContainerAvailable): Likewise.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* tools/virt-login-shell.c (main): Likewise.
* tools/virsh-domain.c (cmdLxcEnterNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* tests/commandtest.c (test23): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Similar to our event-test demo program, it's nice to be able to
have a mode where we can sniff all events at once, rather than
having to spawn multiple virsh in parallel with one for each
event type.
(Can I just say our RegisterAny design is lousy? The fact that
the majority of our callback pointers have a function signature
with the opaque data in a different position, and that we have
to cast the function signature before registering it, makes it
hard to write a generic callback function; we have to write one
for every type of event id. Life would have been easier if we
had designed the callback as a fixed signature with a void*
and size parameter, and then allowed the caller to downcast
the void* to a particular struct for data specific to their
callback id, where we could have then had a single function
with a switch statement for each event id, and register that
one function for all types of events. It would also be nicer
if the callback functions knew which callbackID was being used
when invoking that callback, so that I could use a common data
structure among all registrations instead of having to create
an array of one data per callback. But I really don't want to
go add yet another event API design.)
* tools/virsh-domain.c (cmdEvent): Add --all parameter; convert
all callbacks to support shared counter.
* tools/virsh.pod (event): Document it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Earlier, I added 'virsh event' for lifecycle events, to get the
concept approved; this patch finishes the support for all other
events, although the user still has to register for one event
type at a time. A future patch may add an --all parameter to
make it possible to register for all events through a single
call.
* tools/virsh-domain.c (vshDomainEventWatchdogToString)
(vshDomainEventIOErrorToString, vshGraphicsPhaseToString)
(vshGraphicsAddressToString, vshDomainBlockJobStatusToString)
(vshDomainEventDiskChangeToString)
(vshDomainEventTrayChangeToString, vshEventGenericPrint)
(vshEventRTCChangePrint, vshEventWatchdogPrint)
(vshEventIOErrorPrint, vshEventGraphicsPrint)
(vshEventIOErrorReasonPrint, vshEventBlockJobPrint)
(vshEventDiskChangePrint, vshEventTrayChangePrint)
(vshEventPMChangePrint, vshEventBalloonChangePrint)
(vshEventDeviceRemovedPrint): New helper routines.
(cmdEvent): Support full array of event callbacks.
Signed-off-by: Eric Blake <eblake@redhat.com>
If user wants to grep some info from domain, e.g. disk paths:
# virsh -q domblklist win7 | awk '{print $2}'
Source
/var/lib/libvirt/images/windows.qcow2
/home/zippy/work/tmp/en_windows_7_professional_x64_dvd_X15-65805.iso
while with my change:
# virsh -q domblklist win7 | awk '{print $2}'
/var/lib/libvirt/images/windows.qcow2
/home/zippy/work/tmp/en_windows_7_professional_x64_dvd_X15-65805.iso
We don't print table header in other commands, like list.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I noticed this while shortening switch statements via VIR_ENUM.
Basically, the only ways virAsprintf can fail are if we pass a
bogus format string (but we're not THAT bad) or if we run out
of memory (but it already warns on our behalf in that case).
Throw away the cruft that tries too hard to diagnose a printf
failure.
* tools/virsh-volume.c (cmdVolList): Simplify.
* tools/virsh-pool.c (cmdPoolList): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Dan Berrange suggested that using VIR_ENUM_IMPL is more compact
than open-coding switch statements, and still just as forceful
at making us remember to update lists if we add enum values
in the future. Make this change throughout virsh.
Sure enough, doing this change caught that we missed at least
VIR_STORAGE_VOL_NETDIR.
* tools/virsh-domain-monitor.c (vshDomainIOErrorToString)
(vshDomainControlStateToString, vshDomainStateToString)
(vshDomainStateReasonToString): Change switch to enum lookup.
(cmdDomControl, cmdDominfo): Update caller.
* tools/virsh-domain.c (vshDomainVcpuStateToString)
(vshDomainEventToString, vshDomainEventDetailToString): Change
switch to enum lookup.
(vshDomainBlockJobToString, vshDomainJobToString): New functions.
(cmdVcpuinfo, cmdBlockJob, cmdDomjobinfo, cmdEvent): Update
callers.
* tools/virsh-network.c (vshNetworkEventToString): Change switch
to enum lookup.
* tools/virsh-pool.c (vshStoragePoolStateToString): New function.
(cmdPoolList, cmdPoolInfo): Update callers.
* tools/virsh-volume.c (vshVolumeTypeToString): Change switch to
enum lookup.
(cmdVolInfo, cmdVolList): Update callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
I've noticed that in some cases systemd was quick enough and even
if libvirt-guests.service is marked to be started after the
libvirtd.service my guests were not resumed as
libvirt-guests.sh failed to connect. This is because of a
simple fact: systemd correctly starts libvirt-guests after it
execs libvirtd. However, the daemon is not able to accept
connections right from the start. It's doing some
initialization which may take ages. This problem is not limited
to systemd only, indeed. Any init system that is able to startup
services in parallel (e.g. OpenRC) may run into this situation.
The fix is to try connecting not only once, but continuously a few
times with a small sleep in between tries.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add 'virsh net-event --list' and 'virsh net-event [net] --event=name
[--loop] [--timeout]'. Very similar to 'virsh event'.
* tools/virsh.pod (net-event): Document new command.
* tools/virsh-network.c (vshNetworkEventToString, vshNetEventData)
(vshEventLifecyclePrint, cmdNetworkEvent): New struct and
functions.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add 'virsh event --list' and 'virsh event [dom] --event=name
[--loop] [--timeout]'. Borrows somewhat from event-test.c,
but defaults to a one-shot notification, and takes advantage
of the event loop integration to allow Ctrl-C to interrupt the
wait for an event. For now, this just does lifecycle events.
* tools/virsh.pod (event): Document new command.
* tools/virsh-domain.c (vshDomainEventToString)
(vshDomainEventDetailToString, vshDomEventData)
(vshEventLifecyclePrint, cmdEvent): New struct and functions.
Signed-off-by: Eric Blake <eblake@redhat.com>
I plan to add 'virsh event' to virsh-domain.c and 'virsh
net-event' to virsh-network.c; but as they will share quite
a bit of common boilerplate, it's better to set that up now
in virsh.c.
* tools/virsh.h (_vshControl): Add fields.
(vshEventStart, vshEventWait, vshEventDone, vshEventCleanup): New
prototypes.
* tools/virsh.c (vshEventFd, vshEventOldAction, vshEventInt)
(vshEventTimeout): New helper variables and functions.
(vshEventStart, vshEventWait, vshEventDone, vshEventCleanup):
Implement new functions.
(vshInit, vshDeinit, main): Manage event timeout.
Signed-off-by: Eric Blake <eblake@redhat.com>
Several virsh commands ask for a --timeout parameter in
seconds, then use it to control interfaces that operate on
millisecond limits; I also plan on adding a 'virsh event'
command that also does this. Factor this into a common
function.
* tools/virsh.h (vshCommandOptTimeoutToMs): New prototype.
* tools/virsh.c (vshCommandOptTimeoutToMs): New function.
* tools/virsh-domain.c (cmdBlockCommit, cmdBlockCopy)
(cmdBlockPull, cmdMigrate): Use it.
(vshWatchJob): Adjust timeout scale.
Signed-off-by: Eric Blake <eblake@redhat.com>
Recent autotest/virt-test testing on f20 discovered an anomaly in how
the bandwidth options are documented and used. This was discovered due
to a bug fix in the /sbin/tc utility found in iproute-3.11.0.1 (on f20)
in which overflow was actually caught and returned as an error. The fix
was first introduced in iproute-3.10 (search on iproute2 commit 'a303853e').
The autotest/virt-test test for virsh domiftune was attempting to send
the largest unsigned integer value (4294967295) for maximum value
testing. The libvirt xml implementation was designed to manage values
in kilobytes thus when this value was passed to /sbin/tc, it (now)
properly rejected the 4294967295kbps value.
Investigation of the problem discovered that formatdomain.html.in and
formatnetwork.html.in described the elements and property types slightly
differently, although they use the same code - virNetDevBandwidthParseRate()
(shared by portgroups, domains, and networks xml parsers). Rather than
have the descriptions in two places, this patch will combine and reword
the description under formatnetwork.html.in and have formatdomain.html.in
link to that description.
This documentation faux pas was continued into the virsh man page where
the bandwidth description for both 'attach-interface' and 'domiftune'
did not indicate the format of each value, thus leading to the test using
largest unsigned integer value assuming "bps" rather than "kbps", which
ultimately was wrong.
And provide domain summary stat in that case, for lxc backend.
Use case is a container inheriting all devices from the host,
e.g. when doing application containerization.
When start a guest with --pass-fd, if the argument of --pass-fd is invalid,
virsh will exit, but doesn't free the variable 'dom'.
The valgrind said:
...
==24569== 63 (56 direct, 7 indirect) bytes in 1 blocks are definitely lost in loss record 130 of 234
==24569== at 0x4C2A1D4: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==24569== by 0x4E879A4: virAllocVar (viralloc.c:544)
==24569== by 0x4EBD625: virObjectNew (virobject.c:190)
==24569== by 0x4F3A18A: virGetDomain (datatypes.c:226)
==24569== by 0x4F9311F: remoteDomainLookupByName (remote_driver.c:6636)
==24569== by 0x4F44F20: virDomainLookupByName (libvirt.c:2277)
==24569== by 0x12F616: vshCommandOptDomainBy (virsh-domain.c:105)
==24569== by 0x131C79: cmdStart (virsh-domain.c:3330)
==24569== by 0x12C4AB: vshCommandRun (virsh.c:1752)
==24569== by 0x127001: main (virsh.c:3218)
https://bugzilla.redhat.com/show_bug.cgi?id=1067338
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
For pool which relies on remote resources, such as a "iscsi" type
pool, since how long it takes to export the corresponding devices
to host's sysfs is really depended, it could depend on the network
connection, it also could depend on the host's udev procedures. So
it's likely that the volumes are not able to be detected during pool
starting process, polling the sysfs doesn't work, since we don't
know how much time is best for the polling, and even worse, the
volumes could still be not detected or partly not detected even after
the polling. So we end up with a documentation to prompt the fact,
in virsh manual.
And as a small improvement, let's explicitly say no LUNs found in
the debug log in that case.
Explicitly lists the possible values for "--target" option;
Gets rid of the confused strings like "Suspend-to-RAM";
Emphasises the node *has to* be suspended in the time duration
specified by "--duration". And rewords the entire document a
bit according to the API's implementation and document.
I noticed this problem when adding systemd support to netcf, because I
setup the configure.ac to automatically prefer using systemd over
initscripts when possible - although I had copied the
install-data-local target from the example of libvirt's
"libvirt-guests" service more or less verbatim, "make distcheck" would
fail because it was trying to install the service file directly into
/lib/systemd/system rather than into
/home/user/some/unimportant/name/lib/systemd/system.
This is caused by the install/uninstall rules for the systemd unit
files relying on $(DESTDIR) pointing the installed files to the right
place, but in reality $(DESTDIR) is empty during this part of make
distcheck - it instead sets $(prefix) with the toplevel directory used
for its test build/install/uninstall cycle.
(This problem hasn't been seen when running "make distcheck" in
libvirt because libvirt will never build/install systemd support
unless explicitly told to do so on the configure commandline, and
"make distcheck" doesn't put the "--with-initscript=..." option on the
configure commandline.)
I verified that the same problem does exist in libvirt by modifying
libvirt's configure.ac to set:
init_systemd=yes
with_init_script=systemd+redhat
This forces a build/install of the systemd unit files during
distcheck, which yields an error like this:
/usr/bin/install -c -m 644 virtlockd.service \
/lib/systemd/system/
libtool: install: warning: relinking `libvirt-qemu.la'
/usr/bin/install: cannot remove '/lib/systemd/system/virtlockd.service': Permission denied
make[4]: *** [install-systemd] Error 1
After adding $(prefix) to all the definitions of SYSTEMD_UNIT_DIR,
make distcheck now completes successfully with the modified
configure.ac, and the above lines change to something like this:
/usr/bin/install -c -m 644 virtlockd.service \
/home/laine/devel/libvirt/libvirt-1.2.1/_inst/lib/systemd/system/
Introduce Wireshark dissector plugin which adds support to Wireshark
for dissecting libvirt RPC protocol.
Added following files to build Wireshark dissector from libvirt source
tree.
* tools/wireshark/*: Source tree of Wireshark dissector plugin.
Added followings to configure.ac or Makefile.am.
configure.ac
* --with-wireshark-dissector: Enable support for building Wireshark
dissector.
* --with-ws-plugindir: Specify wireshark plugin directory that dissector
will installed.
* Added tools/wireshark/{Makefile,src/Makefile} to AC_CONFIG_FILES.
Makefile.am
* Added tools/wireshark/ to SUBDIR.
With this patch, user can setup the throttle blkio cgorup
for domain through the virsh cmd, such as:
virsh blkiotune domain1 --device-read-bytes-sec /dev/sda1,1000000,/dev/sda2,2000000
--device-write-bytes-sec /dev/sda1,1000000 --device-read-iops-sec /dev/sda1,10000
--device-write-iops-sec /dev/sda1,10000,/dev/sda2,0
This patch also add manpage for these new options.
Signed-off-by: Guan Qiang <hzguanqiang@corp.netease.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
In a "for" loop there are created two new strings and they may not
be freed if a "target" string cannot be obtained. We have to free
the two created strings to prevent the memory leak.
This has been found by coverity.
John also pointed out that we should somehow care about the "type"
and "device" and Osier agreed to exit with error message if one of
them is set to NULL.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Our fixes for CVE-2013-4400 were so effective at "fixing" bugs
in virt-login-shell that we ended up fixing it into a useless
do-nothing program.
Commit 3e2f27e1 picked the name LIBVIRT_SETUID_RPC_CLIENT for
the witness macro when we are doing secure compilation. But
commit 9cd6a57d checked whether the name IN_VIRT_LOGIN_SHELL,
from an earlier version of the patch series, was defined; with
the net result that virt-login-shell invariably detected that
it was setuid and failed virInitialize.
Commit b7fcc799 closed all fds larger than stderr, but in the
wrong place. Looking at the larger context, we mistakenly did
the close in between obtaining the set of namespace fds, then
actually using those fds to switch namespace, which means that
virt-login-shell will ALWAYS fail.
This is the minimal patch to fix the regressions, although
further patches are also worth having to clean up poor
semantics of the resulting program (for example, it is rude to
not pass on the exit status of the wrapped program back to the
invoking shell).
* tools/virt-login-shell.c (main): Don't close fds until after
namespace swap.
* src/libvirt.c (virGlobalInit): Use correct macro.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1049529
The 'detach-disk' command in virsh used the active XML definition of a
domain even when attempting to remove a disk from the config only. If
the disk was only in the inactive definition the operation failed. Fix
this by using the inactive XML in case that only the config is affected.
https://bugzilla.redhat.com/show_bug.cgi?id=1049529
The legacy virDomainAttachDevice and virDomainDetachDevice operate only
on active domains. When a user specified --current flag with an inactive
domain the old API was used and reported an error. Fix it by calling the
new API if --current is specified explicitly.
https://bugzilla.redhat.com/show_bug.cgi?id=1044806
Currently, sending the ANSI_A keycode from os_x codepage doesn't work as
it has a special value of 0x0. Our internal code handles that no
different to other not defined keycodes. Hence, in order to allow it we
must change all the undefined keycodes from 0 to -1 and adapt some code
too.
# virsh send-key guestname --codeset os_x ANSI_A
error: invalid keycode: 'ANSI_A'
# virsh send-key guestname --codeset os_x ANSI_B
# virsh send-key guestname --codeset os_x ANSI_C
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I noticed a few odd things in 'virt-login-shell --help' output.
* tools/virt-login-shell.c (usage): At most one option accepted,
drop trailing colon.
Signed-off-by: Eric Blake <eblake@redhat.com>
Recent addition of the gluster pool type omitted fixing the virsh and
virConnectListAllStoragePool filters. A typecast of the converting
function in virsh showed that also the sheepdog pool was omitted in the
command parser.
This patch adds gluster pool filtering support and fixes virsh to
properly convert all supported storage pool types. The added typecast
should avoid doing such mistakes in the future.
https://bugzilla.redhat.com/show_bug.cgi?id=1044445
When undefining a VM with storage the man page doesn't explicitly
mention that the volumes need to be a part of the storage pool otherwise
it won't work.
Adding output to 'virsh --version=long' makes it easier to
tell if a distro built with particular libraries (it doesn't
tell you what a remote libvirtd is built with, but is still
better than nothing). But we forgot to mention gluster.
* tools/virsh.c (vshShowVersion): Add gluster witness.
Signed-off-by: Eric Blake <eblake@redhat.com>
Though trying to destroy a physical HBA doesn't make sense at all,
it's still a bit misleading with saying "only works for HBA".
Signed-off-by: Osier Yang <jyang@redhat.com>
Based on a suggestion from Mauricio Tavares.
* tools/virsh-domain.c (cmdDetachInterface, vshFindDisk): Improve
wording.
Signed-off-by: Eric Blake <eblake@redhat.com>
In the 'directory' and 'netfs' storage pools, a user can see
both 'file' and 'dir' storage volume types, to know when they
can descend into a subdirectory. But in a network-based storage
pool, such as the upcoming 'gluster' pool, we use 'network'
instead of 'file', and did not have any counterpart for a
directory until this patch. Adding a new volume type
'network-dir' is better than reusing 'dir', because it makes
it clear that the only way to access 'network' volumes within
that container is through the network mounting (leaving 'dir'
for something accessible in the local file system).
* include/libvirt/libvirt.h.in (virStorageVolType): Expand enum.
* docs/formatstorage.html.in: Document it.
* docs/schemasa/storagevol.rng (vol): Allow new value.
* src/conf/storage_conf.c (virStorageVol): Use new value.
* src/qemu/qemu_command.c (qemuBuildVolumeString): Fix client.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePool): Likewise.
* tools/virsh-volume.c (vshVolumeTypeToString): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemVolDelete): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* tests/sysinfotest.c: Consistently use commas.
* tests/viratomictest.c: Likewise.
* tests/vircgroupmock.c: Likewise.
* tools/virsh-domain.c: Likewise.
* tools/virsh-volume.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
All *-info virsh commands output a list of colon-seperated key-val pairs.
But virsh net-info command misses this colon for key "Name" and "UUID".
Signed-off-by: Hao Liu <hliu@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch shuts up the following warning of clang
on Mac OS X:
virsh.c:2761:22: error: assigning to 'char *' from 'const char [6]' discards qualifiers
[-Werror,-Wincompatible-pointer-types-discards-qualifiers]
rl_readline_name = "virsh";
^ ~~~~~~~
The warning happens because rl_readline_name on Mac OS X comes
from an old readline header that still uses 'char *', while it
is 'const char *' in readline 4.2 (April 2001) and newer.
Tested on Mac OS X 10.8.5 (clang-500.2.75) and Fedora 19 (gcc 4.8.1).
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Before:
$ virsh iface-list
Name State MAC Address
--------------------------------------------
br0 active f0🇩🇪f1:dc:b8:b0
virbr2 active 52:54:00:61:78:0c
After:
$ virsh iface-list
Name State MAC Address
---------------------------------------------------
br0 active f0🇩🇪f1:dc:b8:b0
virbr2 active 52:54:00:61:78:0c
Change the alignment to match the domain listing function.
Before:
$ virsh pool-list
Name State Autostart
-----------------------------------------
boot-scratch active no
default active no
glusterpool active no
$ virsh pool-list --details
Name State Autostart Persistent Capacity Allocation Available
-------------------------------------------------------------------------------
boot-scratch running no yes 117.99 GiB 101.40 GiB 16.60 GiB
default running no yes 117.99 GiB 101.40 GiB 16.60 GiB
glusterpool running no yes 29.40 GiB 44.23 MiB 29.36 GiB
After:
$ virsh pool-list
Name State Autostart
-------------------------------------------
boot-scratch active no
default active no
glusterpool active no
$ virsh pool-list --details
Name State Autostart Persistent Capacity Allocation Available
---------------------------------------------------------------------------------
boot-scratch running no yes 117.99 GiB 101.40 GiB 16.60 GiB
default running no yes 117.99 GiB 101.40 GiB 16.60 GiB
glusterpool running no yes 29.40 GiB 44.23 MiB 29.36 GiB
There were two separate places with that were stringifying type of a
volume. One of the places was out of sync with types implemented
upstream.
To avoid such problems in the future, this patch adds a common function
to convert the type to string and reuses it across the two said places.
Add an extra space before the first column as we have when listing
domains.
Previous output:
$ virsh vol-list glusterpool
Name Path
-----------------------------------------
asdf gluster://gluster-node-1/gv0/asdf
c gluster://gluster-node-1/gv0/c
cd gluster://gluster-node-1/gv0/cd
$ virsh vol-list glusterpool --details
Name Path Type Capacity Allocation
----------------------------------------------------------------------
asdf gluster://gluster-node-1/gv0/asdf unknown 0.00 B 0.00 B
c gluster://gluster-node-1/gv0/c unknown 16.00 B 16.00 B
cd gluster://gluster-node-1/gv0/cd unknown 0.00 B 0.00 B
New output:
$ virsh vol-list glusterpool
Name Path
------------------------------------------------------------------------------
asdf gluster://gluster-node-1/gv0/asdf
c gluster://gluster-node-1/gv0/c
cd gluster://gluster-node-1/gv0/cd
$ virsh vol-list glusterpool --details
Name Path Type Capacity Allocation
------------------------------------------------------------------------
asdf gluster://gluster-node-1/gv0/asdf unknown 0.00 B 0.00 B
c gluster://gluster-node-1/gv0/c unknown 16.00 B 16.00 B
cd gluster://gluster-node-1/gv0/cd unknown 0.00 B 0.00 B
The 'vcpucount' command is a getter command for the vCPUu count. When
one or more of the filtering flags are specified the command returns the
value only for the selected combination. In this case the --live and
--config combination isn't valid. This however didn't cause errors as
the combination of flags was rejected by the libvirt API but then the
fallback code kicked in and requested the count in a way where the clash
of the flags didn't matter.
Mark the flag combination mutually exclusive so that users aren't
confused.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1024245
Allow adjust the number of commands to remember in the command
history.
* tools/virsh.c (vshReadlineInit): Read and sanity the
VIRSH_HISTSIZE variable.
(VIRSH_HISTSIZE_MAX): New constant.
* tools/virsh.pod: Document VIRSH_HISTSIZE variable.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit e962a57 added 'attach-disk --shareable', even though we
already had 'attach-disk --mode=shareable'. Worse, if the user
types 'attach-disk --mode=readonly --shareable', we create
non-sensical XML. The best solution is just to undocument the
duplicate spelling, by having it fall back to the preferred
spelling.
* tools/virsh-domain.c (cmdAttachDisk): Let alias handling fix our
mistake in exposing a second spelling for an existing option.
* tools/virsh.pod: Fix documentation.
Signed-off-by: Eric Blake <eblake@redhat.com>
We want to treat 'attach-disk --shareable' as an undocumented
alias for 'attach-disk --mode=shareable'. By improving our
alias handling, we can allow all such --bool -> --opt=value
replacements, and guarantee up front that the alias is not
mixed with its replacement.
* tools/virsh.c (vshCmddefOptParse, vshCmddefGetOption): Add
support for expanding bool alias to --opt=value.
(opts_echo): Add another alias to test it.
* tests/virshtest.c (mymain): Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
In commit b46c4787dd I changed the code to
watch long running jobs in virsh. Unfortunately I didn't take into
account that poll may get a hangup if the terminal is not a TTY and will
be closed.
This patch avoids polling the STDIN fd when there's no TTY.
Unconditional use of getenv is not secure in setuid env.
While not all libvirt code runs in a setuid env (since
much of it only exists inside libvirtd) this is not always
clear to developers. So make all the code paranoid, even
if it only ever runs inside libvirtd.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virt-login-shell binary shouldn't need to execute programs
relying on $PATH, but just in case set a fixed $PATH value
of /bin:/usr/bin
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The libvirt.so library has far too many library deps to allow
linking against it from setuid programs. Those libraries can
do stuff in __attribute__((constructor) functions which is
not setuid safe.
The virt-login-shell needs to link directly against individual
files that it uses, with all library deps turned off except
for libxml2 and libselinux.
Create a libvirt-setuid-rpc-client.la library which is linked
to by virt-login-shell. A config-post.h file allows this library
to disable all external deps except libselinux and libxml2.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We don't want to inherit any FDs in the new namespace
except for the stdio FDs. Explicitly close them all,
just in case some do not have the close-on-exec flag
set.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
'--print-xml' option is very useful for doing some test.
But we had to specify a real domain for it.
This patch could enable us to specify a fake domain
when using --print-xml option.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The parameter allows overriding default listen address for '-incoming'
cmd line argument on destination.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Make it much easier to test a configuration built without readline
support, by reusing our existing library probe machinery. It gets
a bit tricky with readline, which does not provide a pkg-config
snippet, and which on some platforms requires one of several
terminal libraries as a prerequiste, but the end result should be
the same default behavior but now with the option to disable things.
* m4/virt-readline.m4 (LIBVIRT_CHECK_READLINE): Simplify by using
LIBVIRT_CHECK_LIB.
* tools/virsh.c: Convert USE_READLINE to WITH_READLINE.
Signed-off-by: Eric Blake <eblake@redhat.com>
'make distcheck' fails from a directory configured --without-lxc:
GEN virt-login-shell.1
Can't write-open ../../tools/virt-login-shell.1: Permission denied at /usr/bin/pod2man line 69.
* tools/Makefile.am (EXTRA_DIST): Ship pre-built man page.
Signed-off-by: Eric Blake <eblake@redhat.com>
It's possible to create a domain which will only use a TLS port
and will not have a non-TLS port set by using:
<graphics type='spice' autoport='yes' defaultMode='secure'/>
In such a setup, the 'graphics' node for the running domain will be:
<graphics type='spice' tlsPort='5900'
autoport='yes' listen='127.0.0.1'
defaultMode='secure'>
However, cmdDomDisplay loops over all the 'graphics' node, and it
ignores nodes which don't have a 'port' attribute. This means
'virsh domdisplay' will only return an empty string for domains
as the one above.
This commit looks for both 'port' and 'tlsPort' before deciding
to ignore a graphics node. It also makes sure 'port' is not printed
when it's not set.
This makes 'virsh domdisplay' return
'spice://127.0.0.1?tls-port=5900' for domains using only a TLS
port.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
After commit 8aecd35126 it'll detect
that a required option is not defined and it will assert and exit with:
virsh.c:1364: vshCommandOpt: Assertion `valid->name' failed.
Problem has been latent since commit ed23b106.
Signed-off-by: Eric Blake <eblake@redhat.com>
completer and completer_flags added to the _vshCmdOptDef
structure so it will be possible for completion generators to
conveniently call option completer functions with desired flags.
Signed-off-by: Eric Blake <eblake@redhat.com>
Some systems apparently have a global variable/function called remove
and thus break compilation of virsh-domain.c. Rename the variable to
avoid this.
Reported by GuanQiang.
Since the maxvcpus command query the maximum number of virtual
CPUs supported for a guest VM on this connection, it should be
in virsh-host.c but not virsh-domain.c.
Signed-off-by: yangdongsheng <yangds.fnst@cn.fujitsu.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1006864
Commit 38ab1225 changed the default value of ret from true to false but
forgot to set ret = true when job is NONE. Thus, virsh domjobinfo
returned 1 when there was no job running for a domain but it used to
(and should) return 0 in this case.
The VIR_FREE() macro will cast away any const-ness. This masked a
number of places where we passed a 'const char *' string to
VIR_FREE. Fortunately in all of these cases, the variable was not
in fact const data, but a heap allocated string. Fix all the
variable declarations to reflect this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Recent patches to fix handling of Ctrl-C when interacting with
ssh are not portable to mingw, which lacks termios handling.
The simplest solution is to just compile that code out, and
if someone ever appears that has a serious interest in getting
virsh fully functional even with ssh connections, they can
provide patches at that time.
* tools/virsh.h (_vshControl): Make termattr conditional.
* tools/virsh.c (vshTTYIsInterruptCharacter)
(vshTTYDisableInterrupt, vshTTYRestore, cfmakeraw, vshTTYMakeRaw)
(main): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Automake has builtin support to prevent botched conditional nesting,
but only if you use:
if FOO
else !FOO
endif !FOO
An example error message when using the wrong name:
daemon/Makefile.am:378: error: else reminder (LIBVIRT_INIT_SCRIPT_SYSTEMD_TRUE) incompatible with current conditional: LIBVIRT_INIT_SCRIPT_SYSTEMD_FALSE
daemon/Makefile.am:381: error: endif reminder (LIBVIRT_INIT_SCRIPT_SYSTEMD_TRUE) incompatible with current conditional: LIBVIRT_INIT_SCRIPT_SYSTEMD_FALSE
As our makefiles tend to have quite a bit of nested conditionals,
it's better to take advantage of the benefits of the build system
double-checking that our conditionals are well-nested, but that
requires a syntax check to enforce our usage style.
Alas, unlike C preprocessor and spec files, we can't use indentation
to make it easier to see how deeply nesting goes.
* cfg.mk (sc_makefile_conditionals): New rule.
* daemon/Makefile.am: Enforce the style.
* gnulib/tests/Makefile.am: Likewise.
* python/Makefile.am: Likewise.
* src/Makefile.am: Likewise.
* tests/Makefile.am: Likewise.
* tools/Makefile.am: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The vshWatchJob function registers a SIGINT handler that is used to
abort the active job and does not terminate virsh. Unfortunately, this
breaks when using the ssh transport as SIGINT is sent to the foreground
process group including the ssh transport processes which terminate.
This breaks the connection and migration is left in a insane state.
With this patch the terminal is modified to ignore key binding that
sends SIGINT and does the handling manually.
Resoves: https://bugzilla.redhat.com/show_bug.cgi?id=983348
This patch adds instrumentation to allow modification of config of the
terminal in virsh and successful reset of the state afterwards.
The added helpers allow to disable receiving of SIGINT when pressing the
key sequence (Ctrl+C usualy). This normally sends SIGINT to the
foreground process group which kills ssh processes used for transport of
the data.
When virBufferError is ok in cmdAttachDisk, the latter
should 'goto cleanup', instead of returning a false to
prevent memory leaking.
Signed-off-by: Eric Blake <eblake@redhat.com>
I noticed from an ./autobuild.sh run that we were installing a
virt-login-shell.exe binary when cross-building for mingw,
even though such a binary is necessarily worthless since the
code depends on lxc which is a Linux-only concept.
* tools/Makefile.am (conf_DATA, bin_PROGRAMS, dist_man1_MANS):
Make virt-login-shell installation conditional.
Signed-off-by: Eric Blake <eblake@redhat.com>
Noticed while reviewing another patch that had an accidental
mismatch due to refactoring. An audit of the code showed that
very few callers of vshCommandOpt were expecting a return of
-2, indicating programmer error, and of those that DID check,
they just propagated that status to yet another caller that
did not check. Fix this by making the code blatantly warn
the programmer, rather than silently ignoring it and possibly
doing the wrong thing downstream.
I know that we frown on assert()/abort() inside libvirtd
(libraries should NEVER kill the program that linked them),
but as virsh is an app rather than the library, and as this
is not the first use of assert() in virsh, I think this
approach is okay.
* tools/virsh.h (vshCommandOpt): Drop declaration.
* tools/virsh.c (vshCommandOpt): Make static, and add a
parameter. Abort on programmer errors rather than making callers
repeat that logic.
(vshCommandOptInt, vshCommandOptUInt, vshCommandOptUL)
(vshCommandOptString, vshCommandOptStringReq)
(vshCommandOptLongLong, vshCommandOptULongLong)
(vshCommandOptBool): Adjust callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
Surprisingly, augtool get (or print) returns "path = value" while we are
only interested in the value. We need to remove the "path = " part from
the augtool's output. The following is an example of the augtool command
as used in virt-sanlock-cleanup script:
$ augtool get /files/etc/libvirt/qemu-sanlock.conf/disk_lease_dir
/files/etc/libvirt/qemu-sanlock.conf/disk_lease_dir = /var/lib/libvirt/sanlock
Commit a0b6a36f "fixed" what abfff210 broke (URI precedence), but
there was still one more thing missing to fix. When using virsh
parameters to setup debugging, those weren't honored, because at the
time debugging was initializing, arguments weren't parsed yet. To
make ewerything work as expected, we need to initialize the debugging
twice, once before debugging (so we can debug option parsing properly)
and then again after these options are parsed.
As a side effect, this patch also fixes a leak when virsh is ran with
multiple '-l' parameters.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since 785ff34bf8 we are using the outputStr variable in cleanup label.
However, there is a possibility to jump to the label before the variable
has been declared:
virsh-pool.c: In function 'cmdPoolList':
virsh-pool.c:1121:25: error: jump skips variable initialization [-Werror=jump-misses-init]
goto asprintf_failure;
^
virsh-pool.c:1308:1: note: label 'asprintf_failure' defined here
asprintf_failure:
^
virsh-pool.c:1267:11: note: 'outputStr' declared here
char *outputStr = NULL;
VIR_FREE(caps) is not enough to free an array allocated
by vshStringToArray.
==17== 4 bytes in 1 blocks are definitely lost in loss record 4 of 728
==17== by 0x4EFFC44: virStrdup (virstring.c:554)
==17== by 0x128B10: _vshStrdup (virsh.c:125)
==17== by 0x129164: vshStringToArray (virsh.c:218)
==17== by 0x157BB3: cmdNodeListDevices (virsh-nodedev.c:409)
https://bugzilla.redhat.com/show_bug.cgi?id=1001536
==23== 41 bytes in 1 blocks are definitely lost in loss record 626 of 727
==23== by 0x4F0099F: virAsprintfInternal (virstring.c:358)
==23== by 0x15D2C9: cmdPoolList (virsh-pool.c:1268)
https://bugzilla.redhat.com/show_bug.cgi?id=1001536
virsh secret-list leak when no secrets are defined:
==27== 8 bytes in 1 blocks are definitely lost in loss record 6 of 726
==27== by 0x4E941DD: virAllocN (viralloc.c:183)
==27== by 0x5037F1A: remoteConnectListAllSecrets (remote_driver.c:3076)
==27== by 0x5004EC6: virConnectListAllSecrets (libvirt.c:16298)
==27== by 0x15F813: vshSecretListCollect (virsh-secret.c:397)
==27== by 0x15F0E1: cmdSecretList (virsh-secret.c:532)
And so do some other *-list commands.
https://bugzilla.redhat.com/show_bug.cgi?id=1001536
The messages were only freed on error.
==12== 1,100 bytes in 1 blocks are definitely lost in loss record 698 of 729
==12== by 0x4E98C22: virBufferAsprintf (virbuffer.c:294)
==12== by 0x12C950: vshOutputLogFile (virsh.c:2440)
==12== by 0x12880B: vshError (virsh.c:2254)
==12== by 0x131957: vshCommandOptDomainBy (virsh-domain.c:109)
==12== by 0x14253E: cmdStart (virsh-domain.c:3333)
https://bugzilla.redhat.com/show_bug.cgi?id=1001536
virsh cpu-stats guest --start 0 --count 3
It outputs right but the return value is 1 rather than 0
echo $?
1
Found by running libvirt-autotest
./run -t libvirt --tests virsh_cpu_stats
Commit abfff210 changed the order of vshParseArgv() and vshInit() in
order to make fix debugging of parameter parsing. However, vshInit()
did a vshReconnect() even though ctl->name wasn't set according to the
'-c' parameter yet. In order to keep both issues fixed, I've split
the vshInit() into vshInitDebug() and vshInit().
One simple memleak of ctl->name is fixed as a part of this patch,
since it is related to the issue it's fixing.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=999323
When using virsh secret-list - if the secret types are cephx or iscsi,
then allow fetch/print of the usage information. Prior to the change
the following would print:
UUID Usage
-----------------------------------------------------------
1b40a534-8301-45d5-b1aa-11894ebb1735 Unused
a5ba3efe-6adf-4a6a-b243-f010a043e314 Unused
Afterwards:
UUID Usage
-----------------------------------------------------------
1b40a534-8301-45d5-b1aa-11894ebb1735 ceph ceph_example
a5ba3efe-6adf-4a6a-b243-f010a043e314 iscsi libvirtiscsi
Use the new semantics of vshStringToArray to avoid leaking the array of
volumes to be deleted. The array would be leaked in case the first
volume was found in the domain definition. Also refactor the code a bit
to sanitize naming of variables hoding arrays and dimensions of the
arrays.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=996050
At a slightly larger memory expense allow stealing of items from the
string array returned from vshStringToArray and turn the result into a
string list compatible with virStringSplit. This will allow to use the
common dealloc function.
This patch also fixes a few forgotten checks of return from
vshStringToArray and one memory leak.
We were failing to autoprobe which schema to use for several
top-level XML elements.
* tools/virt-xml-validate.in (TYPE): Recognize <domainsnapshot>,
<filter>, and <secret>.
Signed-off-by: Eric Blake <eblake@redhat.com>
All good tools should have --help and --version output :)
Furthermore, we want to ensure a failed exit if xmllint fails,
or even for 'virt-xml-validate > /dev/full'.
* tools/virt-xml-validate.in: Add option parsing. Output errors
to stderr. Update documentation to match.
* tools/Makefile.am (virt-xml-validate): Substitute version.
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently the virConnectBaselineCPU API does not expose the CPU features
that are part of the CPU's model. This patch adds a new flag,
VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES, that causes the API to explicitly
list all features that are part of that model.
Signed-off-by: Don Dugger <donald.d.dugger@intel.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=997765
==1349431== 8 bytes in 1 blocks are definitely lost in loss record 11 of 760
==1349431== at 0x4C2A554: calloc (vg_replace_malloc.c:593)
==1349431== by 0x4E9AA3E: virAllocN (in /usr/lib64/libvirt.so.0.1001.1)
==1349431== by 0x4EF28C4: virXPathNodeSet (in /usr/lib64/libvirt.so.0.1001.1)
==1349431== by 0x130B83: cmdCPUBaseline (in /usr/bin/virsh)
==1349431== by 0x12C608: vshCommandRun (in /usr/bin/virsh)
==1349431== by 0x12889A: main (in /usr/bin/virsh)
Address a number of code, style and docs issues identified
in review of virt-login-shell after it was merged.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To avoid having to assign a failure code to the returned variable switch
this function to negative logic. This will fix issue with invalid number
of cpus returning success return code.
https://bugzilla.redhat.com/show_bug.cgi?id=996466
I attempted 'virsh blockcopy $dom vda $path --wait --verbose', then
hit Ctrl-C; I was a bit surprised to see this error message:
Block Copy: [ 3 %]error: failed to query job for disk vda
when I had been expecting:
Block Copy: [ 3 %]
Copy aborted
* tools/virsh-domain.c (cmdBlockCopy): Print graceful exit message
rather than error when ctrl-c interrupts job.
Signed-off-by: Eric Blake <eblake@redhat.com>
The virLoginShellAllowedUser method must not free the 'groups'
parameter it is given, as that is owned by the caller.
The virLoginShellAllowedUser method should be checking
'!*ptr' (ie empty string) rather than '!ptr' (NULL string)
since the latter cannot be true.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
virt-login-shell.c was failing to compile with
CC virt_login_shell-virt-login-shell.o
virt-login-shell.c: In function 'main':
virt-login-shell.c:205:5: error: implicit declaration of function 'setlocale' [-Werror=implicit-function-declaration]
virt-login-shell.c:205:5: error: nested extern declaration of 'setlocale' [-Werror=nested-externs]
virt-login-shell.c:205:20: error: 'LC_ALL' undeclared (first use in this function)
Add a virt-login-shell binary that can be set as a user's
shell, such that when they login, it causes them to enter
the LXC container with a name matching their user name.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The VIR_DOMAIN_PAUSED_GUEST_PANICKED constant is badly named,
leaking the QEMU event name. Elsewhere in the API we use
'CRASHED' rather than 'PANICKED', and the addition of 'GUEST'
is redundant since all events are guest related.
Thus rename it to VIR_DOMAIN_PAUSED_CRASHED, which matches
with VIR_DOMAIN_RUNNING_CRASHED and VIR_DOMAIN_EVENT_CRASHED.
It was added in commit 14e7e0ae8d
which post-dates v1.1.0, so is safe to rename before 1.1.1
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The VIR_DOMAIN_SHUTDOWN_CRASHED state constant does not appear
to be used in the QEMU code anyway. It also doesn't make much
(any) sense, since the 'shutdown' state is a transient state
between 'running' and 'shutoff' and when a guest crashes, it
does not end up in a 'shutdown' state, only 'shutoff'.
It was added in commit 14e7e0ae8d
which post-dates v1.1.0, so is safe to remove before 1.1.1
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Noticed that the expected "not supported" error is dropped when
invoking 'virsh snapshot-list dom' on a Xen installation running
the libxl driver
virsh snapshot-list test
error: Invalid snapshot: virDomainSnapshotFree
The error is overwritten by a call to virDomainSnapshotFree
in cleanup code within cmdSnapshotList. Prevent overwritting
the real error by not calling virDomainSnapshotFree with a NULL
virDomainSnapshotPtr.
Resolves:https://bugzilla.redhat.com/show_bug.cgi?id=923053
When cdrom is block type, the virsh change-media failed to insert
source info because virsh uses "<source block='/dev/sdb'/>" while
the correct name of the attribute for block disks is "dev".
Add a "--pass-fds N,M,..." arg to the virsh start/create
methods. This allows pre-opened file descriptors from the
shell to be passed on into the guest
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Use the virDomainSetMemoryStatsPeriodFlags() to pass a period defined by
usage of a new --period option in order to set the collection period for the
balloon driver. This may enable or disable the collection based on the value.
Add the --current, --live, & --config options to dommemstat.
Recent changes uncovered FORWARD_NULL and NEGATIVE_RETURNS problems with
the processing of the 'ndevices' and its associated allocated arrays in
'vshNodeDeviceListCollect' due to the possibility of returning -1 in a
call and using the returned value as a for loop index end condition.
Recent changes uncovered FORWARD_NULL and NEGATIVE_RETURNS problems with
the processing of the 'nActiveIfaces' and 'nInactiveIfaces' and their
associated allocated arrays in 'vshInterfaceListCollect' due to the
possibility of returning -1 in a call and using the return value as a
for loop index end condition.
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Actually, I'm turning this function into a macro as filename,
function name and line number needs to be passed. The new
function virAsprintfInternal is introduced with the extended set
of arguments.
Free the old XML strings before overwriting them if the user
has chosen to reedit the file or force the redefinition.
Found by Alex Jia trying to reproduce another bug:
https://bugzilla.redhat.com/show_bug.cgi?id=977430#c3
Paolo Bonzini pointed out that it's actually possible to migrate a qemu
instance that was paused due to I/O error and it will be able to work on
the destination if the storage is accessible.
This patch introduces flag VIR_MIGRATE_ABORT_ON_ERROR that cancels the
migration in case an I/O error happens while it's being performed and
allows migration without this flag. This flag can be possibly used for
other error reasons that may be introduced in the future.
This patch fixes changes done in commit 29c1e913e4
that was pushed without implementing review feedback.
The flag introduced by the patch is changed to VIR_DOMAIN_VCPU_GUEST and
documentation makes the difference between regular hotplug and this new
functionality more explicit.
The virsh options that enable the use of the new flag are changed to
"--guest" and the documentation is fixed too.
This flag will allow to use qemu guest agent commands to disable
(offline) and enable (online) processors in a live guest that has the
guest agent running.
Our documentation says a pool may be referenced by its name or UUID
anywhere if it makes sense (pool-name and pool-uuid are the only
exceptions). However, vol-create and vol-create-as commands did not obey
this.
Because it's a valid combination. p2p still uses a separate channel
for qemu migration, so there's value in letting the user specify a manual
migrate URI for overriding auto-port, or libvirt's FQDN lookup.
What _isn't_ allowed is --migrateuri and TUNNELLED, since there is
no separate migration channel. Disallow that instead
I noticed several unusual spacings in for loops, and decided to
fix them up. See the next commit for the syntax check that found
all of these.
* examples/domsuspend/suspend.c (main): Fix spacing.
* python/libvirt-override.c: Likewise.
* src/conf/interface_conf.c: Likewise.
* src/security/virt-aa-helper.c: Likewise.
* src/util/virconf.c: Likewise.
* src/util/virhook.c: Likewise.
* src/util/virlog.c: Likewise.
* src/util/virsocketaddr.c: Likewise.
* src/util/virsysinfo.c: Likewise.
* src/util/viruuid.c: Likewise.
* src/vbox/vbox_tmpl.c: Likewise.
* src/xen/xen_hypervisor.c: Likewise.
* tools/virsh-domain-monitor.c (vshDomainStateToString): Drop
default case, to let compiler check us.
* tools/virsh-domain.c (vshDomainVcpuStateToString): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Introduced by commit 1daa4ba33a. vshCommandOptStringReq returns
0 on *success* or the option is not required && not present, both
are right result. Error out when returning 0 is not correct.
the caller, it doesn't have to check wether it
Don't print 'OPTION' if there's no options. Just behaves as DESCRIPTION
does.
This mostly affects 'interface' command group.
Signed-off-by: Zhang Xiaohe <zhangxh@cn.fujitsu.com>
Reported-by: Li Yang <liyang.fnst@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Automake already passes all CFLAGS to the linker too, so it
is not necessary to set WARN_LDFLAGS in addition to the
WARN_CFLAGS variable.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
These all existed before virfile.c was created, and for some reason
weren't moved.
This is mostly straightfoward, although the syntax rule prohibiting
write() had to be changed to have an exception for virfile.c instead
of virutil.c.
This movement pointed out that there is a function called
virBuildPath(), and another almost identical function called
virFileBuildPath(). They really should be a single function, which
I'll take care of as soon as I figure out what the arglist should look
like.
Recent commit '53531e16' resulted in a new Coverity warning regarding
a missing break in the ':' options processing. Adjust the commit to
avoid the issue.
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
Mention file/volume contents instead of just 'file'/'volume'.
Also change Download->download in vol-download help,
to be consistent with other volume commands.
https://bugzilla.redhat.com/show_bug.cgi?id=955537
For long options, print:
* the option as specified by the user if it's unknown
* the canonical long option if its argument is not
a number (and should be)
And for missing arguments, print both the short and
the long option name.
(Doing only one of those would require either parsing
argv ourselves or let getopt print the errors, since
we can't tell long and short options apart by optopt
or longindex)
https://bugzilla.redhat.com/show_bug.cgi?id=949373
Unsupported long option:
$ virsh --pm
Before:
error: unsupported option '-
After:
error: unsupported option '--pm'. See --help.
Missing parameter:
$ virsh --deb
Before:
error: option '-d' requires an argument
After:
error: option '-d'/'--debug' requires an argument
$ virsh -rd
Before:
error: option '-d' requires an argument
After:
error: option '-d'/'--debug' requires an argument
Non-numeric parameter:
$ virsh --deb duck
Before:
error: option -d takes a numeric argument
After:
error: option --debug takes a numeric argument
'virsh help | grep nodedev-det' shows only nodedev-detach, but
'virsh help nodedev | grep nodedev-det' also shows the old alias
nodedev-dettach that we intentionally hid in commit af3f9aab.
See also commit 787f4fe and this bug report:
https://bugzilla.redhat.com/show_bug.cgi?id=956966
* tools/virsh.c (vshCmdGrpHelp): Copy suppression of vshCmdHelp.
Signed-off-by: Eric Blake <eblake@redhat.com>
The virsh nodedev-detach command has a new --driver option. If it's
given virsh will attempt to use the new virNodeDeviceDetachFlags API
instead of virNodeDeviceDettach. Validation of the driver name string
is left to the hypervisor (qemu accepts "kvm" or "vfio". The only
other hypervisor that implements these functions is xen, and it only
accepts NULL).
This patch factors out the vCPU count retrieval including fallback means
into vshCPUCountCollect() and removes the duplicated code to retrieve
individual counts.
The --current flag (this flag is assumed by default) now works also with
--maximum or --active without the need to explicitly specify the state
of the domain that is requested.
This patch also fixes the output of "virsh vcpucount domain" on inactive
domains:
Before:
$ virsh vcpucount domain
maximum config 4
error: Requested operation is not valid: domain is not running
current config 4
error: Requested operation is not valid: domain is not running
After:
$virsh vcpucount domain
maximum config 4
current config 4
.. and for transient domains too:
Before:
$ virsh vcpucount transient-domain
error: Requested operation is not valid: cannot change persistent config of a transient domain
maximum live 3
error: Requested operation is not valid: cannot change persistent config of a transient domain
current live 1
After:
$ virsh vcpucount transient-domain
maximum live 3
current live 1
Using of a incorrect value for the --holdtime option was silently
ignored and 0 was used. In case a negative number was used, it
overflowed as the API expects a unsigned int.
Fix the data type and getter function type and report errors on
incorrect values.
With this patch, include public headers in "" form is only allowed
for "internal.h". And only the external tools (examples|tools|python
|include/libvirt) can include the public headers in <> form.
Explicitly state that using incomplete XML definition snippets for hot-management
commands may have unexpected results due to autogenerating values for some of
the fields if they aren't specified explicitly.
Newer pod (hello rawhide) complains if you attempt to mix bullets
and non-bullets in the same list:
virsh.pod around line 3177: Expected text after =item, not a bullet
As our intent was to nest an inner list, we make that explicit to
keep pod happy.
* tools/virsh.pod (ENVIRONMENT): Use correct pod syntax.
This patch improves the error message after disconnecting from the
hypervisor and adds the close callback operations required not to leak
the callback reference.
The function is used to establish connection so it should be in the main
virsh file. This movement also enables further improvements done in next
patches.
Note that the "connect" command has moved from the host section of virsh to the
main section. It is now listed by 'virsh help virsh' instead of 'virsh help
host'.
Before closing the connection we unregister the close callback
to prevent a reference leak.
Further, the messages on virConnectClose != 0 are a bit more specific
now.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
By passing the flags -z relro -z now to the linker, we can force
it to resolve all library symbols at startup, instead of on-demand.
This allows it to then make the global offset table (GOT) read-only,
which makes some security attacks harder.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
PIE (position independent executable) adds security to executables
by composing them entirely of position-independent code (PIC. The
.so libraries already build with -fPIC. This adds -fPIE which is
the equivalent to -fPIC, but for executables. This for allows Exec
Shield to use address space layout randomization to prevent attackers
from knowing where existing executable code is during a security
attack using exploits that rely on knowing the offset of the
executable code in the binary, such as return-to-libc attacks.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
virsh schedinfo was able to set only one parameter at a time (not
counting the deprecated options), but it is useful to set more at
once, so this patch adds the possibility to do stuff like this:
virsh schedinfo <domain> cpu_shares=0 vcpu_period=0 vcpu_quota=0 \
emulator_period=0 emulator_quota=0
Invalid scheduler options are reported as well. These were previously
reported only if the command hadn't updated any values (when
cmdSchedInfoUpdate returned 0).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=810078
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=919372
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=919375
The virsh(1) man page wasn't saying anything about the 'migrateuri'
parameter other than it can be usually omitted. A patched version of
docs/migrate.html.in is taken in this patch to fix that up in the man
page.
The man page states that with --config the next boot is affected. This
can be understood as if _only_ the next boot was affected. This isn't
true if the machine is running.
This patch adds the full --live, --config, --current infrastructure and
tweaks stuff to correctly support the obsolete --persistent flag.
Note that this patch changes the the behavior of the --config flag to match the
use of this flag in rest of libvirt. This flag was mistakenly renamed from
--persistent that originaly had different semantics.
The domif-getlink command did not terminate successfully when the
interface state was found. As the code used old and too complex approach
to do the job, this patch refactors it and fixes the bug.
The 'virsh vcpupin' and 'virsh emulatorpin' commands use the same
code to parse the cpulist. This patch abstracts the same code as
a helper. Along with various code style fixes, and error improvement
(only error "Physical CPU %d doesn't exist" if the specified CPU
exceed the range, no "cpulist: Invalid format", see the following
for an example of the error prior to this patch).
% virsh vcpupin 4 0 0-8
error: Physical CPU 4 doesn't exist.
error: cpulist: Invalid format.
Since the refactoring in fbe2d49 we call virSecretFree even if
virSecretDefineXML fails, which leads to overwriting the error
message with:
error: Invalid secret: virSecretFree
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=929045
Right now, libvirt-guests gives awkward output. It's possible to
force faster failure by setting /etc/sysconfig/libvirt-guests to use:
ON_SHUTDOWN=shutdown
PARALLEL_SHUTDOWN=0
SHUTDOWN_TIMEOUT=1
ON_BOOT=ignore
at which point, we see:
$ service libvirt-guests restart
Running guests on default URI: a, b, d, c
Shutting down guests on default URI...
Starting shutdown on guest: a
Shutdown of guest a failed to complete in time.Starting shutdown on guest: b
Shutdown of guest b failed to complete in time.Starting shutdown on guest: d
Shutdown of guest d failed to complete in time.Starting shutdown on guest: c
Shutdown of guest c failed to complete in time.libvirt-guests is configured not to start any guests on boot
* tools/libvirt-guests.sh.in (shutdown_guest): Add missing newline.
Reported by Xuesong Zhang.
VIR_CONNECT_LIST_NODE_DEVICES_CAP_FC_HOST to filter the FC HBA,
and VIR_CONNECT_LIST_NODE_DEVICES_CAP_VPORTS to filter the FC HBA
which supports vport.
The docs assumed the command works always for QEMU and other
hypervisors. As this is done using the balloon mechainism live increase
of the maximum memory limit isn't supported. Fix the docs to mention
this limitation.
Don't print the pool option name if it's null.
Before:
virsh # vol-name vol
error: failed to get vol 'vol', specifying --(null) might help
error: Storage volume not found: no storage vol with matching path vol
After:
virsh # vol-name vol
error: failed to get vol 'vol'
error: Storage volume not found: no storage vol with matching path vol
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=924571
This patch adds three macros to the virsh source tree that help to
easily check for mutually exclusive parameters.
VSH_EXCLUSIVE_OPTIONS_EXPR has four arguments, two expressions to check
and two names of the parameters to print in the message.
VSH_EXCLUSIVE_OPTIONS is more specific and check the command structure
for the parameters using vshCommandOptBool.
VSH_EXCLUSIVE_OPTIONS_VAR is meant to check boolean variables with the
same name as the parameters.
Clarify that net-create deals with a transient virtual
network whereas net-define defines a persistent virtual
network definition and will create the network (xml)
definition file.
Clarify that net-destroy works with both transient and
persistent virtual networks.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
After we switched to C99 initialization, I noticed there were many
places where the specification of .flags parameter differed. After
going through many options and deciding whether to unify the
initialization to be '.flags = 0' or '.flags = VSH_OFLAG_NONE', I
realized both can be removed and it makes the code easier to go
through.
According to the man page, the memspec parameter should have the
'--memspec' option mandatory and this is as close as we can get to
that. What this change does is explained below.
man virsh:
snapshot-create-as ... [[--live] [--memspec memspec]]
virsh help snapshot-create-as before this patch:
SYNOPSIS
snapshot-create-as ... [<memspec>] ...
...
OPTIONS
[--memspec] <string> ...
virsh help snapshot-create-as after this patch:
SYNOPSIS
snapshot-create-as ... [--memspec <string>] ...
...
OPTIONS
--memspec <string> ...
Add a new virDomainLxcEnterSecurityLabel() function as a
counterpart to virDomainLxcEnterNamespaces(), which can
change the current calling process to have a new security
context. This call runs client side, not in libvirtd
so we can't use the security driver infrastructure.
When entering a namespace, the process spawned from virsh
will default to running with the security label of virsh.
The actual desired behaviour is to run with the security
label of the container most of the time. So this changes
virsh lxc-enter-namespace command to invoke the
virDomainLxcEnterSecurityLabel method.
The current behaviour is:
LABEL PID TTY TIME CMD
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 1 pts/0 00:00:00 systemd
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 3 pts/1 00:00:00 sh
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 24 ? 00:00:00 systemd-journal
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 29 ? 00:00:00 dhclient
staff_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 47 ? 00:00:00 ps
Note the ps command is running as unconfined_t, After this patch,
The new behaviour is this:
virsh -c lxc:/// lxc-enter-namespace dan -- /bin/ps -eZ
LABEL PID TTY TIME CMD
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 1 pts/0 00:00:00 systemd
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 3 pts/1 00:00:00 sh
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 24 ? 00:00:00 systemd-journal
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 32 ? 00:00:00 dhclient
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 38 ? 00:00:00 ps
The '--noseclabel' flag can be used to skip security labelling.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Properly check the return value of vshCommandOptStringReq for xmlfile:
* error out on incorrect input (--xmlfile '')
* use default XML <domainsnapshot/> with no --xmlfile specified
(Broken by commit b2e8585)
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=919826
RHEL4 vintage libxml2 header files are missing xmlSaveToBuffer
despite the symbol existing in the binary
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Only nodedev-destroy and nodedev-dumpxml can benifit from the
new API, other commands like nodedev-detach only works for
PCI devices, WWN makes no sense for them.
This patch switches string option retrieval to vshCommandOptStringReq
and refactors some error paths to avoid an unlikely memory leak of a
secret object in cmdSecretSetValue.
also avoids potential NULL pointer dereference:
$ virsh snapshot-current asdf ""
error: invalid snapshotname argument '(null)'
by removing the error message in favor of vshCommandOptStringReq
This patch adds some empty lines to separate blocks of code, cleans up
unnecessary error message constructs in cmdNodeDeviceDetach,
cmdNodeDeviceReAttach, cmdNodeDeviceReset and refactors error paths in
cmdNodeDeviceDumpXML.
This patch adds a helper function with similar semantics to
vshCommandOptString that requests a string argument, but does some error
reporting without the need to do it in the functions themselves.
The error reporting also provides information about the parameter whose
retrieval failed.
Way back when I started making changes for Coverity messages my first set
were to a bunch of CHECKED_RETURN errors. In particular virAsprintf() had
a few callers that Coverity noted didn't check their return (although some
did check if the buffer being printed to was NULL or not).
It was suggested at the time as a further patch an ATTRIBUTE_RETURN_CHECK
should be added to virAsprintf(), see:
https://www.redhat.com/archives/libvir-list/2013-January/msg00120.html
This patch does that and fixes a few more instances not found by Coverity
that failed the check.
When a disk-only snapshot is requested the domain is treated as if it
was offline. This forbids to mix memory checkpoints with the DISK_ONLY
flag.
This patch improves the error message and mentions the restriction in
the virsh man page.
Linefeed is missed in the help of node-memory-tune.
This patch just adds '\n' to get a correct help message.
Signed-off-by: Satoru Moriya <satoru.moriya@hds.com>
This patch fixes the following issues in the cpu-stats virsh command:
1) Renames label failed_params to no_memory to match coding style
2) Uses proper typed parameter cleanup in error paths to avoid leaks
3) Adds a ret variable and simplifies error labels
4) Changes error message to a slightly more descriptive one and gets rid
of the newline at the end:
Before:
$ virsh cpu-stats tr
error: Failed to virDomainGetCPUStats()
error: Requested operation is not valid: domain is not running
After:
$ tools/virsh cpu-stats tr
error: Failed to retrieve CPU statistics for domain 'tr'
error: Requested operation is not valid: domain is not running
Add a 'lxc-enter-namespace' command which accepts a domain name
and then a command + args to run, attached to the container
eg
virsh -c lxc:/// lxc-enter-namespace demo -- /bin/ps -auxf
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch introduces support for LXC specific public APIs. In
common with what was done for QEMU, this creates a libvirt_lxc.so
library and libvirt/libvirt-lxc.h header file.
The actual APIs are
int virDomainLxcOpenNamespace(virDomainPtr domain,
int **fdlist,
unsigned int flags);
int virDomainLxcEnterNamespace(virDomainPtr domain,
unsigned int nfdlist,
int *fdlist,
unsigned int *noldfdlist,
int **oldfdlist,
unsigned int flags);
which provide a way to use the setns() system call to move the
calling process into the container's namespace. It is not
practical to write in a generically applicable manner. The
nearest that we could get to such an API would be an API which
allows to pass a command + argv to be executed inside a
container. Even if we had such a generic API, this LXC specific
API is still useful, because it allows the caller to maintain
the current process context, in particular any I/O streams they
have open.
NB the virDomainLxcEnterNamespace() API is special in that it
runs client side, so does not involve the internal driver API.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch changes whitespace and the length of the separation line from
this format:
$ virsh net-list --all
Name State Autostart Persistent
--------------------------------------------------
default inactive yes yes
to
$ virsh net-list --all
Name State Autostart Persistent
----------------------------------------------------------
default inactive yes yes
to match the output of virsh list.
The QEMU specific APIs all operate on domains, not the host,
so should be in the virsh-domain.c file / group
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
See also commit 66ff2dd, where we avoided installing these files
as executables.
* daemon/Makefile.am (libvirtd.service): Drop chmod.
* tools/Makefile.am (libvirt-guests.service): Likewise.
* src/Makefile.am (virtlockd.service, virtlockd.socket):
Likewise.
We had several different styles of .in conversion in our Makefiles:
ALLCAPS, @ALLCAPS@, @lower@, ::lower::
Canonicalize on one form, to make it easier to copy and paste
between .in files.
Also, we were using some non-portable sed constructs: \@ is an
undefined escape sequence (it happens to be @ itself in GNU sed,
but POSIX allows it to mean something else), as well as risky
behavior (failure to consistently quote things means a space
in $(sysconfdir) could throw things off; also, Autoconf recommends
using | rather than , or ! in the s||| operator, because | has to
be quoted in shell and is therefore less likely to appear in file
names than , or !).
Fix all of these uses to follow the same syntax.
* daemon/libvirtd.8.in: Switch to @var@.
* tools/virt-xml-validate.in: Likewise.
* tools/virt-pki-validate.in: Likewise.
* src/locking/virtlockd.init.in: Likewise.
* daemon/Makefile.am: Prefer | over ! in sed.
(libvirtd.8): Prefer consistent substitution.
(libvirtd.init, libvirtd.service): Avoid non-portable sed.
* tools/Makefile.am (libvirt-guests.sh, libvirt-guests.init)
(libvirt-guests.service): Likewise.
(virt-xml-validate, virt-pki-validate, virt-sanlock-cleanup):
Prefer consistent capitalization.
* src/Makefile.am (virtlockd.init, virtlockd.service)
(virtlockd.socket): Prefer consistent substitution.
For non-default connections (specified by the environment variable or
the command line option) we call virConnectOpenAuth without registering
the vshCatchDisconnect callback.
This calls vshReconnect instead which takes care of it.
Since we (ab)use vshReconnect for the default URI connection, if it
fails it might print 'Failed to reconnect to the hypervisor' even if we
were never connected before.
This changes it to only mention reconnection on the first try after
getting disconnected.
Most of this deals with moving the libvirt-guests.sh script which
does all the work to /usr/libexec, so it can be shared by both
systemd and traditional init. Previously systemd depended on
the script being in /etc/init.d
Required to fix https://bugzilla.redhat.com/show_bug.cgi?id=789747
Offline migration transfers inactive definition of a domain (which may
or may not be active). After successful completion, the domain remains
in its current state on source host and is defined but inactive on
destination host. It's a bit more clever than virDomainGetXMLDesc() on
source host followed by virDomainDefineXML() on destination host, as
offline migration will run pre-migration hook to update the domain XML
on destination host. Currently, copying non-shared storage is not
supported during offline migration.
Offline migration can be requested with a new migration flag called
VIR_MIGRATE_OFFLINE (which has to be combined with
VIR_MIGRATE_PERSIST_DEST flag).
The termios struct exported by the termios.h header is used as an
argument for vshMakeStdinRaw(). The header isn't used anywhere in
tools/virsh-domain.c.
This patch adds the header to the header declaring vshMakeStdinRaw() and
removes other places in virsh.
Libvirt's helper API's when called directly don't raise the error so
that virsh remembers it. Subsequent calls to libvirt API's might reset
the error.
In case of schedinfo virDomainFree() in the cleanup section resets the
error when virTypedParameterAssignFromStr() fails.
This patch adds function vshSaveLibvirtError() that can be called after
calling libvirt helper APIs to ensure the error is remembered.
virStringSplit requires a non-NULL input, but commit cef78ed forgot
to follow the rule.
* tools/virsh-domain.c (cmdReboot, cmdShutdown): Avoid NULL deref.
The virNodeSuspend API allows for a duration of 0, to mean no
timed wakup. virsh needlessly forbids this though
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virDomainShutdownFlags and virDomainReboot APIs allow the caller
to request the operation is implemented via either acpi button press
or a guest agent. For containers, a couple of other methods make
sense, a message to /dev/initctl, and direct kill(SIGTERM|HUP) of
the container init process.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
On error, virStoragePoolGetAutostart would return -1 leaving autostart
untouched.
Removed the misleading debug message as well.
Error: CHECKED_RETURN (CWE-252):
libvirt-0.10.2/tools/virsh-pool.c:1386: unchecked_value: No check of the
return value of "virStoragePoolGetAutostart(pool, &autostart)".
Found by coverity:
Error: SIZEOF_MISMATCH (CWE-569):
libvirt-0.10.2/tools/virsh-domain.c:4754: suspicious_sizeof: Passing
argument "8UL /* sizeof (cpumap) */" to function
"_vshCalloc(vshControl *, size_t, size_t, char const *, int)" and
then casting the return value to "unsigned char *" is suspicious.
Error: SIZEOF_MISMATCH (CWE-569):
libvirt-0.10.2/tools/virsh-domain.c:4942: suspicious_sizeof: Passing
argument "8UL /* sizeof (cpumap) */" to function
"_vshCalloc(vshControl *, size_t, size_t, char const *, int)" and
then casting the return value to "unsigned char *" is suspicious.
Throughout the code, we've always used VIR_DOMAIN_SHUTDOWN* flags
even for virDomainReboot() API and its implementation. Fortunately,
the appropriate macros has the same value. But if we want to keep
things consistent, we should be using the correct macros. This
patch doesn't break anything, luckily.
Just a little rewrite of the cmdDomDisplay function to make it
consistent and hopefully more readable. This also fixes a problem
with password not being displayed for vnc even with the
"--include-password" option.
Now that we can filter on this information, we should also make
it easy to get at.
* tools/virsh-snapshot.c (cmdSnapshotInfo): Add another output
row, and switch to XPath queries rather than strstr.
Snapshot filtering based on types is useful enough to add
back-compat support into virsh. It is also rather easy - all
versions of libvirt that don't understand the new filter flags
already gave us sufficient information in a single XML field
to reconstruct all the information we need (that is, it isn't
until libvirt 1.0.1 that we have more interesting types of
snapshots, such as offline external).
* tools/virsh-snapshot.c (vshSnapshotFilter): New function.
(vshSnapshotListCollect): Add fallback support.
As we enable more modes of snapshot creation, it becomes more important
to be able to quickly filter based on snapshot properties. This patch
introduces new filter flags; subsequent patches will introduce virsh
back-compat filtering, as well as actual libvirt filtering.
* include/libvirt/libvirt.h.in (virDomainSnapshotListFlags): Add
five new flags in two new groups.
* src/libvirt.c (virDomainSnapshotNum, virDomainSnapshotListNames)
(virDomainListAllSnapshots, virDomainSnapshotNumChildren)
(virDomainSnapshotListChildrenNames)
(virDomainSnapshotListAllChildren): Document them.
* src/conf/snapshot_conf.h (VIR_DOMAIN_SNAPSHOT_FILTERS_STATUS)
(VIR_DOMAIN_SNAPSHOT_FILTERS_LOCATION): Add new convenience filter
collection macros.
* tools/virsh-snapshot.c (cmdSnapshotList): Add 5 new flags.
* tools/virsh.pod (snapshot-list): Document them.
This reverts commits 5f63a5cb42
and ff86b0c97b. After much list
discussion, consensus was that libvirt aliases should be reserved
to correct typos, otherwise it risks confusion. Rather, we
should implement a way for users to provide their own aliases
as part of their virsh configuration preferences.
Modified the places where virNodeGetInfo was used for the purpose
of obtaining the maximum node CPU number. Transparently falling
back to virNodeGetInfo in case of failure.
Wrote utility function vshNodeGetCPUCount to compute node CPU
number.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
External checkpoints could be created with snapshot-create, but
without libvirt supplying a default name for the memory file,
it is essential to add a new argument to snapshot-create-as to
allow the user to choose the memory file name. This adds the
option --memspec [file=]name[,snapshot=type], where type can
be none, internal, or external. For an example,
virsh snapshot-create-as $dom --memspec /path/to/file
is the shortest possible command line for creating an external
checkpoint, named after the current timestamp.
* tools/virsh-snapshot.c (vshParseSnapshotMemspec): New function.
(cmdSnapshotCreateAs): Use it.
* tests/virsh-optparse (test_url): Test it.
* tools/virsh.pod (snapshot-create-as): Document it.
So far, none of the existing callers of vshStringToArray expected
the user to ever pass a literal comma; meanwhile, snapshot parsing
had rolled its own array parser. Moving the comma escaping into
the common function won't affect any existing callers, and will make
this function reusable for adding memory handling to snapshot parsing.
As a bonus, the testsuite was already testing snapshot parsing, so
the fact that the test still passes means that we are now giving
testsuite exposure to vshStringToArray.
* tools/virsh-snapshot.c (vshParseSnapshotDiskspec): Move ,,
parsing...
* tools/virsh.c (vshStringToArray): ...into common function.
Also, vshStrdup can't fail.
Make it clear that the alternate terms have no difference except
for length of time they were supported.
* tools/virsh.pod (start, shutdown, reboot): More documentation.
https://bugzilla.redhat.com/show_bug.cgi?id=873344 suggested that
the grouping 'boot', 'shutdown', 'reboot'; as well as the grouping
'start', 'stop', 'restart'; might be easier to remember than the
current mix of 'start', 'shutdown', 'reboot'.
Also, touch up the wording of 'reboot' to be more accurate.
* tools/virsh-domain.c (domManagementCmds): Add other command names.
* tools/virsh.pod (start, shutdown, reboot): Document the aliases.
The default behavior while creating external checkpoints is to pause the
guest while the memory state is captured. We want the users to sacrifice
space saving for creating the memory save image while the guest is live
to minimize downtime.
This patch adds a flag that causes the guest not to be paused before
taking the snapshot.
*include/libvirt/libvirt.h.in:
- add new paused reason: VIR_DOMAIN_PAUSED_SNAPSHOT
- add new flag for taking snapshot: VIR_DOMAIN_SNAPSHOT_CREATE_LIVE
*tools/virsh-domain-monitor.c:
- add string representation for VIR_DOMAIN_PAUSED_SNAPSHOT
*tools/virsh-snapshot.c:
- add support for VIR_DOMAIN_SNAPSHOT_CREATE_LIVE
*tools/virsh.pod:
- add docs for --live option added to use
VIR_DOMAIN_SNAPSHOT_CREATE_LIVE flag
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=871756
Commit cd1e8d1 assumed that systems new enough to have journald
also have mkostemp; but this is not true for uclibc.
For that matter, use of mkstemp[s] is unsafe in a multi-threaded
program. We should prefer mkostemp[s] in the first place.
* bootstrap.conf (gnulib_modules): Add mkostemp, mkostemps; drop
mkstemp and mkstemps.
* cfg.mk (sc_prohibit_mkstemp): New syntax check.
* tools/virsh.c (vshEditWriteToTempFile): Adjust caller.
* src/qemu/qemu_driver.c (qemuDomainScreenshot)
(qemudDomainMemoryPeek): Likewise.
* src/secret/secret_driver.c (replaceFile): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainScreenshot): Likewise.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=862515
which describes inconsistencies in dealing with duplicate mac
addresses on network devices in a domain.
(at any rate, it resolves *almost* everything, and prints out an
informative error message for the one problem that isn't solved, but
has a workaround.)
A synopsis of the problems:
1) you can't do a persistent attach-interface of a device with a mac
address that matches an existing device.
2) you *can* do a live attach-interface of such a device.
3) you *can* directly edit a domain and put in two devices with
matching mac addresses.
4) When running virsh detach-device (live or config), only MAC address
is checked when matching the device to remove, so the first device
with the desired mac address will be removed. This isn't always the
one that's wanted.
5) when running virsh detach-interface (live or config), the only two
items that can be specified to match against are mac address and model
type (virtio, etc) - if multiple netdevs match both of those
attributes, it again just finds the first one added and assumes that
is the only match.
Since it is completely valid to have multiple network devices with the
same MAC address (although it can cause problems in many cases, there
*are* valid use cases), what is needed is:
1) remove the restriction that prohibits doing a persistent add of a
netdev with a duplicate mac address.
2) enhance the backend of virDomainDetachDeviceFlags to check for
something that *is* guaranteed unique (but still work with just mac
address, as long as it yields only a single results.
This patch does three things:
1) removes the check for duplicate mac address during a persistent
netdev attach.
2) unifies the searching for both live and config detach of netdevices
in the subordinate functions of qemuDomainModifyDeviceFlags() to use the
new function virDomainNetFindIdx (which matches mac address and PCI
address if available, checking for duplicates if only mac address was
specified). This function returns -2 if multiple matches are found,
allowing the callers to print out an appropriate message.
Steps 1 & 2 are enough to fully fix the problem when using virsh
attach-device and detach-device (which require an XML description of
the device rather than a bunch of commandline args)
3) modifies the virsh detach-interface command to check for multiple
matches of mac address and show an error message suggesting use of the
detach-device command in cases where there are multiple matching mac
addresses.
Later we should decide how we want to input a PCI address on the virsh
commandline, and enhance detach-interface to take a --address option,
eliminating the need to use detach-device
* src/conf/domain_conf.c
* src/conf/domain_conf.h
* src/libvirt_private.syms
* added new virDomainNetFindIdx function
* removed now unused virDomainNetIndexByMac and
virDomainNetRemoveByMac
* src/qemu/qemu_driver.c
* remove check for duplicate max from qemuDomainAttachDeviceConfig
* use virDomainNetFindIdx/virDomainNetRemove instead
of virDomainNetRemoveByMac in qemuDomainDetachDeviceConfig
* use virDomainNetFindIdx instead of virDomainIndexByMac
in qemuDomainUpdateDeviceConfig
* src/qemu/qemu_hotplug.c
* use virDomainNetFindIdx instead of a homespun loop in
qemuDomainDetachNetDevice.
* tools/virsh-domain.c: modified detach-interface command as described
above
Patch 61299a1c fixed a long-standing pod error in the man page.
But we should be preventing these up front.
See also https://bugzilla.redhat.com/show_bug.cgi?id=870273
* tools/Makefile.am (virt-xml-validate.1, virt-pki-validate.1)
(virt-host-validate.1, virt-sanlock-cleanup.8, virsh.1): Reject
pod conversion errors.
* daemon/Makefile.am ($(srcdir)/libvirtd.8.in): Likewise.
We always expose individual bits from flags as separate options rather
than exposing a raw flags options. Since virNodeSuspendForDuration does
not currently support any flags, the only way of using this --flags
options that would not fail is "--flags 0", which is equivalent to
omitting the option. Thus it is highly unlikely anyone would actually be
using it and removing it should be safe.
https://bugzilla.redhat.com/show_bug.cgi?id=869100 mentioned some
confusion about 'virsh snapshot-list' errors. Clean up a
misleading error message, and add some documentation.
* tools/virsh-snapshot.c (cmdSnapshotList): Mention --current
rather than --from when appropriate.
* tools/virsh.pod (snapshot-list): Mention that the named starting
point is NOT part of the list except under --tree.
Upstream kernel introduced new sysfs knob "merge_across_nodes" to
specify if pages from different numa nodes can be merged. When set
to 0, only pages which physically reside in the memory area of
same NUMA node can be merged. When set to 1, pages from all nodes
can be merged.
This patch supports the tuning by adding new param field
"shm_merge_across_nodes".
Using VIR_DOMAIN_XML_MIGRATABLE flag, one can request domain's XML
configuration that is suitable for migration or save/restore. Such XML
may contain extra run-time stuff internal to libvirt and some default
configuration may be removed for better compatibility of the XML with
older libvirt releases.
This flag may serve as an easy way to get the XML that can be passed
(after desired modifications) to APIs that accept custom XMLs, such as
virDomainMigrate{,ToURI}2 or virDomainSaveFlags.
Add a read-only udev based backend for virInterface. Useful for distros
that do not have netcf support yet. Multiple libvirt based utilities use
a HAL based fallback when virInterface is not available which is less
than ideal. This implements:
* virConnectNumOfInterfaces()
* virConnectListInterfaces()
* virConnectNumOfDefinedInterfaces()
* virConnectListDefinedInterfaces()
* virConnectListAllInterfaces()
* virConnectInterfaceLookupByName()
* virConnectInterfaceLookupByMACString()
I was using qemu-monitor-command during development, and found it quite
hard to use. Compare the results of this patch on ease of reading:
$ virsh qemu-monitor-command dom '{"execute":"query-version"}'
{"return":{"qemu":{"micro":1,"minor":12,"major":0},"package":"(qemu-kvm-0.12.1.2)"},"id":"libvirt-7683"}
$ virsh qemu-monitor-command --pretty dom '{"execute":"query-version"}'
{
"return": {
"qemu": {
"micro": 1,
"minor": 12,
"major": 0
},
"package": "(qemu-kvm-0.12.1.2)"
},
"id": "libvirt-7674"
}
* tools/virsh-host.c (cmdQemuMonitorCommand): New option.
* tools/virsh.pod (qemu-monitor-command): Document it.
This command uses the new virNetworkUpdate() API to modify an existing
network definition, and optionally have those modifications take
effect immediately without restarting the network.
An example usage:
virsh net-update mynet add-last ip-dhcp-host \
"<host mac='00:11:22:33:44:55' ip='192.168.122.45'/>" \
--live --config
If you like, you can instead put the xml into a file, and call like
this:
virsh net-update mynet add ip-dhcp-host /tmp/myxml.xml
--live --config
virsh will autodetect whether the argument is itself an xml element,
or if it's a file, by looking at the first character - the first
character of an xml element is always "<", and the first character of
a file is almost always *not* "<" (in the rare case that it is, the
user could specify "./<filename...").
A --parent-index option is also available (to give the index within a
list of parent objects, e.g. the index of the parent <ip> element when
updating ip-dhcp-host elements), but is optional and at least for now
will probably be used rarely.
--live, --config, and --current options - if you specify --live, only
the live state of the network will be updated. If you also specify
--config, then the persistent configuration will also be updated;
these two commands can be given separately, or both together. If you
don't specify either (you can optionally specify "--current" for the
same effect), then the "current" config will be updated (i.e. if the
network is active, then only its live config is affected, but if the
network is inactive, only the persistent config is affected).
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
Based exclusively on work by Eric Blake in a patch posted with the same
subject. However some modifications related to comments and my plans to
add another backend.
Added WITH_INTERFACE as the only automake variable deciding whether to
build the driver and using WITH_NETCF to identify that we're wanting to
use the netcf library as the backend.
* configure.ac: Added with_interface
* src/interface/netcf_driver.c: Renamed..
* src/interface/interface_backend_netcf.c: ..to this to match storage.
* src/interface/netcf_driver.h: Renamed..
* src/interface/interface_driver.h: ..to this.
* daemon/Makefile.am: Respect WITH_INTERFACE and WITH_NETCF.
* libvirt.spec.in: Add RPM support for --with-interface
The new command 'virsh blockcommit $dom $disk' requests the start
of an asynchronous commit operation across the entire chain of
$disk. Further arguments can fine-tune which portion of the
chain is committed. Existing 'virsh blockjob' commands can then
track the status, change the bandwidth, or abort the commit job.
With a bit more on the command line, 'virsh blockcommit $dom $disk
--wait --verbose' can be used for blocking behavior, with visual
feedback on the overall status, and can be canceled with Ctrl-C.
The overall design, including the wait loop logic, borrows heavily
from the existing blockpull command.
* tools/virsh-domain.c (cmdBlockCommit): New function.
* tools/virsh.pod (blockcommit): Document it.
New command node-memory-tune to get/set the node memory parameters,
only two parameters are allowed to set (pages_to_scan, and sleep_millisecs,
see documents in this patch for more details).
Example of node-memory-tune's output:
Shared memory:
pages_to_scan 100
sleep_millisecs 20
pages_shared 0
pages_sharing 0
pages_unshared 0
pages_volatile 0
full_scans 0
This introduces four new options for secret-list, to filter the
returned secrets by whether it's ephemeral or not, and/or by
whether it's private or not.
* tools/virsh-secret.c: (New helper vshSecretSorter,
vshSecretListFree, and vshCollectSecretList; Use the new
API for secret-list; error out if flags are specified,
because there is no way to filter the results when using
old APIs (no APIs to get the properties (ephemeral, private)
of a secret yet).
* tools/virsh.pod: Document the 4 new options.
tools/virsh-nwfilter.c:
* vshNWFilterSorter to sort network filters by name
* vshNWFilterListFree to free the network filter objects list.
* vshNWFilterListCollect to collect the network filter objects, trying
to use new API first, fall back to older APIs if it's not supported.
tools/virsh-nodedev.c:
* vshNodeDeviceSorter to sort node devices by name
* vshNodeDeviceListFree to free the node device objects list.
* vshNodeDeviceListCollect to collect the node device objects, trying
to use new API first, fall back to older APIs if it's not supported.
* Change option --cap to accept multiple capability types.
tools/virsh.pod
* Update document for --cap
This improve helper vshStringToArray to accept const string as
argument instead. To not convert the const string when using
vshStringToArray, and thus avoid motifying it.
I got an off-list report about a bad diagnostic:
Target network card mac 52:54:00:49:07:ccdoes not match source 52:54:00:49:07:b8
True to form, I've added a syntax check rule to prevent it
from recurring, and found several other offenders.
* cfg.mk (sc_require_whitespace_in_translation): New rule.
* src/conf/domain_conf.c (virDomainNetDefCheckABIStability): Add
space.
* src/esx/esx_util.c (esxUtil_ParseUri): Likewise.
* src/qemu/qemu_command.c (qemuCollectPCIAddress): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetMetadata)
(qemuDomainGetMetadata): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeNetBridge): Likewise.
* src/rpc/virnettlscontext.c
(virNetTLSContextCheckCertDNWhitelist): Likewise.
* src/vmware/vmware_driver.c (vmwareDomainResume): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc, vboxAttachDrives):
Avoid false negatives.
* tools/virsh-domain.c (info_save_image_dumpxml): Reword.
Based on a report by Luwen Su.
tools/virsh-interface.c:
* vshInterfaceSorter to sort interfaces by name
* vshInterfaceListFree to free the interface objects list.
* vshInterfaceListCollect to collect the interface objects, trying
to use new API first, fall back to older APIs if it's not supported.
tools/virsh-network.c:
* vshNetworkSorter to sort networks by name
* vshNetworkListFree to free the network objects list.
* vshNetworkListCollect to collect the network objects, trying
to use new API first, fall back to older APIs if it's not supported.
* New options --persistent, --transient, --autostart, --no-autostart,
for net-list, and new field 'Persistent' for its output.
tools/virsh.pod:
* Add documents for the new options.
tools/virsh-volume.c:
* vshStorageVolSorter to sort storage vols by name
* vshStorageVolumeListFree to free the volume objects list
* vshStorageVolumeListCollect to collect the volume objects, trying
to use new API first, fall back to older APIs if it's not supported.
When setting the cpu tunables in virsh you are able to update only a
subset of them. Virsh while doing the update updated all of the
tunables, changed ones with new values and unchanged with old ones.
This is unfortunate as it:
a) might overwrite some other change by a race condition (unprobable)
b) fails with range checking as some of the old values saved might be
out of range
This patch changes the update procedure so that only the changed value
is updated on the host.
This patch also fixes a very unprobable memory leak if the daemon would
return a string tunable parameter, as the typed parameter array was not
cleared.
A last minute rename in commit fc122e1a to virsh.h was not properly
reflected when rebasing virsh-pool.c in commit 93a346d.
* tools/virsh-pool.c (vshStoragePoolListCollect): Use VSH_MATCH,
not MATCH.
tools/virsh-pool.c:
* vshStoragePoolSorter to sort the pool list by pool name.
* struct vshStoragePoolList to present the pool list, pool info
is collected by list->poolinfo if 'details' is specified by
user.
* vshStoragePoolListFree to free the pool list
* vshStoragePoolListCollect to collect the pool list, new API
virStorageListAllPools is tried first, if it's not supported,
fall back to older APIs.
* New options --persistent, --transient, --autostart, --no-autostart
and --type for pool-list. --persistent or --transient is to filter
the returned pool list by whether the pool is persistent or not.
--autostart or --no-autostart is to filter the returned pool list
by whether the pool is autostarting or not. --type is to filter
the pools by pool types. E.g.
% virsh pool-list --all --persistent --type dir,disk
tools/virsh.pod:
* Add documentations for the new options.
Move definition of MATCH from virsh-domain-monitor.c into
virsh.h, and rename it as VSH_MATCH for further use.
* tools/virsh-domain-monitor.c: Change MATCH into VSH_MATCH
* tools/virsh.h: Define VSH_MATCH
The storage pool's management doesn't relate with a domain, it
probably was an intention, but not achieved yet. And the fact
is only active pools are listed by default.
Yesterday's commit 15d2c9f pointed out that virsh was still using
localtime(), which is not thread-safe, even though virsh is
definitely multi-threaded. Even if we only ever triggered it from
one thread, it's better safe than sorry for maintenance purposes.
* cfg.mk (exclude_file_name_regexp--sc_prohibit_nonreentrant):
Tighten the rule.
* tools/virsh.c (vshOutputLogFile): Avoid localtime.
(vshEditWriteToTempFile, vshEditReadBackFile, cmdCd, cmdPwd)
(vshCloseLogFile): Avoid strerror.
* tools/console.c (vshMakeStdinRaw): Likewise.
* tools/virsh-domain.c (vshGenFileName): Fix spacing in previous
patch.
On 09/04/2012 08:20 AM, Eric Blake wrote:
> tv_sec is required by POSIX to be
> of type time_t; so this is a bug in the OpenBSD header
> [for declaring it as long]
Most likely this problem arose because of the patch I pushed
in gnulib commit e07d7c40f3ca5ec410cf5aa6fa03cfe51e712039.
Previously, gnulib required timeval's tv_sec to be
the same size as time_t. But now, it requires only that
tv_sec be big enough to hold a time_t.
This patch was needed for Emacs. Without the patch, gnulib
replaced struct timeval on OpenBSD, and this messed up
utimens.c, and Emacs wouldn't build.
Alternatively, gnulib could substitute its own struct timeval
for the system's, wrapping every struct timeval-using function
(gettimeofday, futimesat, futimes, lutimes, etc. That'd be
more work, though. And it would introduce some performance
issues with gettimeofday, which is supposed to be fast.
I've been trying to get away from using struct timeval,
and to use the higher-resolution struct timespec instead,
so messing with these obsolescent interfaces has been
lower priority for me. But if someone wants to take the
more-ambitious approach that'd be fine, I expect.
For this particular case, though, how about if we avoid
the problem entirely? libvirt doesn't need to use struct
timeval here at all. It makes libvirt smaller and probably
faster, and it ports to OpenBSD without messing with gnulib.
Now that vshCommandRun() checks for the connection automaticaly, remove
all of the redundant checks in the code.
vshConnectionUsability() no longer needs to be exported and this patch
marks it static.
Almost each virsh command uses the function vshConnectionUsability
before doing anything, to check if the connection is "alive". Commands
that don't need an conection are already conveniently marked with
VSH_CMD_FLAG_NOCONNECT. We can automaticaly check for the connection
before calling any remote command so we don't forget to do so.
This patch also upgrades the connection check to use virConnectIsAlive
along with the current approach.
When executing virsh -t <command> the reported timing was off
by 3 orders of magnitude if the command took more than one
second.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Although virsh command raises a correct error information, the command status
returns 0(true), this patch is used for fixing this issue.
Signed-off-by: Alex Jia <ajia@redhat.com>
The bandwidth units for blockpull and blockcopy are in Megabytes per
Second, not Megabits per Second.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch adds two macros: VIR_DOMAIN_SCHEDULER_EMULATOR_PERIOD,
VIR_DOMAIN_SCHEDULER_EMULATOR_QUOTA for controlling cpu bandwidth
for emulator activities not tied to vcpus
Since the move to systemd libvirt-guests doesn't output this progress
information anymore. This patch brings back this feature.
It is helpful to show the admin what the system is waiting for and what
is left of the timeout (e.g. for calibrating the shutdown timing of a ups).
Rewriting the current line with \r doesn't work anymore in the context
of systemd. So always write new lines, but move to 5 second intervals
to avoid flooding the console.
Last of the file splits.
* tools/virsh-volume.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-volume.c: Likewise.
(vshCommandOptVolBy): Fix flag usage.
Almost done with the splits.
* tools/virsh-snapshot.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-snapshot.c: Likewise.
One of the simpler splits.
* tools/virsh-secret.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-secret.c: Likewise.
More in a series of file splits.
* tools/virsh-pool.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-pool.c: Likewise.
(virCommandOptPoolBy): Fix flag usage.
Yet another split file.
* tools/virsh-nwfilter.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-nwfilter.c: Likewise.
Another worthwhile split, needed one more public function.
* tools/virsh-nodedev.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh-nodedev.c: Use new header.
* tools/virsh.c: Likewise.
(vshTreePrint): Export.
* tools/virsh.h (vshTreePrint): Declare.
Another relatively easy file split.
* tools/virsh-network.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-network.c: Likewise.
(vshCommandOptNetworkBy): Update signature.
Another relatively easy split, since helper functions were fixed
in the previous patch.
* tools/virsh-interface.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-interface.c: Likewise.
(vshCommandOptInterfaceBy): Check flags.
In preparation for splitting virsh-interface.c, I found these
functions need to be declared in virsh.h, as well as one that
belongs more properly in virsh-domain.h. Also, since we
use the VSH_BY* flags in more than one function, I improved
how they are used.
* tools/virsh.h (vshNameSorter, vshCmdHasOption): Declare.
(VSH_BYID): Turn into enum.
(vshCommandOptDomainBy): Move...
* tools/virsh-domain.h): ...here.
* tools/virsh.c: (vshNameSorter): Export.
(cmd_has_option): Rename...
(vshCmdHasOption): ...and export.
(vshCommandOptDomainBy): Move...
* tools/virsh-domain.c (vshCommandOptDomainBy): ...here, adjust
signature, and check flags.
* tools/virsh-network.c (vshCommandOptNetworkBy): Update callers.
* tools/virsh-nwfilter.c (vshCommandOptNWFilterBy): Likewise.
* tools/virsh-secret.c (vshCommandOptSecret): Likewise.
* tools/virsh-domain-monitor.c (includes): Likewise.
* tools/virsh-host.c (includes): Likewise.
The splits are getting easier, with fewer cleanups needed in virsh.h.
* tools/virsh-host.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh-host.c: Use new header.
* tools/virsh.c: Likewise.
Another file worth compiling on its own instead of by .c inclusion.
* tools/virsh-domain-monitor.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.h (vshGetDomainDescription): Move to correct
header.
* tools/virsh-domain-monitor.c: Use new header.
* tools/virsh.c: Likewise.
* tools/virsh-domain.c: Likewise.
C99 says that __foo naming is reserved for the compiler. Besides,
we had several different styles in use; this consolidates things
to set up the typedefs up front then declare the types with
consistent naming.
* tools/virsh.h: Use consistent struct naming.
* tools/virsh.c (_vshCommandParser): Likewise.
The virsh-domain.c file was pretty self-contained; the only
entry point was the table of command definitions. The bulk
of this patch is making more functions in virsh.c reusable.
A later patch will clean up poor naming choices.
* tools/Makefile.am (virsh_SOURCES): Build virsh-domain.c.
* tools/virsh-domain.h: New file.
* tools/virsh.h (virshReportError, vshResetLibvirtError)
(vshAskReedit, vshStreamSink): Declare.
* tools/virsh.c: Switch from using .c to .h.
(virshReportError, vshResetLibvirtError, vshAskReedit)
(vshStreamSink, prettyCapacity): Export.
(vshCatchInt): Move...
* tools/virsh-domain.c: ...into sole user. Use header.
Having one .c file include another does not give any compilation
benefits; move towards modular .o files by first splitting out
reused declarations into a new virsh.h. This patch doesn't try
very hard to see which functions are used or not, to make it
easier to review the file split. Future patches can further trim
the header to be smaller.
* tools/Makefile.am (virsh_SOURCES): List new file, and prepare
for others.
* tools/virsh.c: Split declarations...
* tools/virsh.h: ...into new file, and make several functions
non-static.
* tools/virsh-domain-monitor.c (vshGetDomainDescription): Make
non-static.
It's easier to order things in topological order than it is to
forward declare in one file for use only by one other file.
* tools/virsh.c (vshWatchJob, parseRateStr)
(vshDomainStateToString, vshDomainStateReasonToString)
(vshDomainControlStateToString, vshDomainVcpuStateToString): Drop
useless prototypes.
* tools/virsh-domain.c (vshWatchJob): Move earlier.
The '#endif' for a WIN32 conditional was placed one function
too high, leaving the impl of the console command enabled
and referencing functions that were disabled
* tools/virsh.c: New macro vshStrcasecmp
* tools/virsh-domain-monitor.c: Use vshStrcasecmp instead of
strcasecmp
* tools/virsh-snapshot.c: Likewise
* cfg.mk: Only avoid doing strcase checking for virsh.c
As the consensus in:
https://www.redhat.com/archives/libvir-list/2012-July/msg01692.html,
this patch is to destroy conf/virdomainlist.[ch], folding the
helpers into conf/domain_conf.[ch].
* src/Makefile.am:
- Various indention fixes incidentally
- Add macro DATATYPES_SOURCES (datatypes.[ch])
- Link datatypes.[ch] for libvirt_lxc
* src/conf/domain_conf.c:
- Move all the stuffs from virdomainlist.c into it
- Use virUnrefDomain and virUnrefDomainSnapshot instead of
virDomainFree and virDomainSnapshotFree, which are defined
in libvirt.c, and we don't want to link to it.
- Remove "if" before "free" the object, as virObjectUnref
is in the list "useless_free_options".
* src/conf/domain_conf.h:
- Move all the stuffs from virdomainlist.h into it
- s/LIST_FILTER/LIST_DOMAINS_FILTER/
* src/libxl/libxl_driver.c:
- s/LIST_FILTER/LIST_DOMAINS_FILTER/
- no (include "virdomainlist.h")
* src/libxl/libxl_driver.c: Likewise
* src/lxc/lxc_driver.c: Likewise
* src/openvz/openvz_driver.c: Likewise
* src/parallels/parallels_driver.c: Likewise
* src/qemu/qemu_driver.c: Likewise
* src/test/test_driver.c: Likewise
* src/uml/uml_driver.c: Likewise
* src/vbox/vbox_tmpl.c: Likewise
* src/vmware/vmware_driver.c: Likewise
* tools/virsh-domain-monitor.c: Likewise
* tools/virsh.c: Likewise
Similar to the previous patch, prepending 'help' to a partial
command string doesn't cut us any slack.
$ virsh help pool-define-as --name foo --type dir
error: command 'help' doesn't support option --name
This patch adds a few hacks to make 'help' ignore everything after the
first data bit, so the above command shows help output for pool-define-as.
Often times I find myself halfway through typing a long command when
I want to see 'help' output. I instinctively append '--help' to the
command I'm typing, only to get an error:
$ virsh vol-create-as foo --help
error: command 'vol-create-as' doesn't support option --help
This patch makes --help work in a pretty hacky way. One missing piece
here is that --help isn't listed as an option in the actual 'help <cmd>'
output, but maybe this can be a starting point for someone.
For some reason I only get this after applying subsequent upcoming
patches that touch virsh, but don't seem to actually cause the warning.
virsh.c: In function ‘vshCommandParse’:
virsh.c:2014:46: error: ‘opt_index’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
cc1: all warnings being treated as errors
List:
- some old libvir/libvirt rename leftovers (the only problem can be
if somebody parses 'virsh version' output really badly)
- remove pointless tags specified in some pages that are not used
I originally postet this into the Fedora bugzilla
https://bugzilla.redhat.com/show_bug.cgi?id=843836
Currently gracefully shutting down guest vms on host shutdown does not work on
Fedora 17, the guests are killed hard on system shutdown.
The reason is systemd considers libvirt-guests.service to be stopped when the
system is running:
$ systemctl status libvirt-guests.service
libvirt-guests.service - Suspend Active Libvirt Guests
Loaded: loaded (/usr/lib/systemd/system/libvirt-guests.service;
enabled)
Active: deactivating (stop) since Fri, 27 Jul 2012 15:47:31 +0200;
2min 48s ago
Process: 1085 ExecStart=/etc/init.d/libvirt-guests start
(code=exited, status=0/SUCCESS)
Control: 1150 (libvirt-guests)
CGroup: name=systemd:/system/libvirt-guests.service
└ control
├ 1150 /bin/sh /etc/init.d/libvirt-guests stop
└ 2257 sleep 1
libvirt-guests.service is defined as type "simple" in systemd (the default).
That means systemd will shut down the service when the start executable is
terminated after starting is done. Systemd will not call stop again on system
shutdown because it thinks it is already stopped.
The solution is to define it as type "oneshot" and set the flag
"RemainAfterExit". Then systemd will consider the service as active after
startup and will call the stop function on host shutdown.
This is a follow up patch of commit f9ce7dad6, it modifies all
the files which declare the copyright like "See COPYING.LIB for
the License of this software" to use the detailed/consistent one.
And deserts the outdated comments like:
* libvirt-qemu.h:
* Summary: qemu specific interfaces
* Description: Provides the interfaces of the libvirt library to handle
* qemu specific methods
*
* Copy: Copyright (C) 2010, 2012 Red Hat, Inc.
Uses the more compact style like:
* libvirt-qemu.h: Interfaces specific for QEMU/KVM driver
*
* Copyright (C) 2010, 2012 Red Hat, Inc.
On some fallback paths in virsh, error reported by the previously failed
API is cleared by virResetLastError() that doesn't free error stored by
virsh. This patch changes this to clear it using vshResetLibvirtError().
Virsh uses an error handler to save errors from libvirt. On some code
paths it's needed to clear libvirt errors and continue on fallback code
paths without reporting failure.
This patch adds function vshResetLibvirtError() that clears error
returned by libvirt and updates all places where the old two-line method
was used.
When undefining a domain and removing associated storage using "virsh
undefine --storage" the domain was at first undefined and after that the
storage removal proces was started. If the user specified an invalid
disk to remove, the error could not be corrected.
This patch moves enumeration and filtering of volumes that should be
removed before the domain is undefined, but the removal process is still
kept after the domain has been undefined.
Change the permissible minimum value of nodesuspend duration time
to 60 seconds. If option is less than the value, reports error.
Update virsh help and manpage the infomation.
Commands in node device group moved from virsh.c to virsh-nodedev.c,
* virsh.c: Remove commands in node device group.
* virsh-nodedev.c: New file, filled with commands in node device group
* po/POTFILES.in: Add virsh-nodedev.c
* cfg.mk: Skip to check config.h including for virsh-nodedev.c
Commands in host group moved from virsh.c to virsh-host.c,
* virsh.c: Remove commands in host group.
* virsh-host.c: New file, filled with commands in host group
* po/POTFILES.in: Add virsh-host.c
* cfg.mk: Skip to check config.h including for virsh-host.c
Commands to manage domain snapshot are moved from virsh.c to
virsh-snapshot.c.
* virsh.c: Remove domain snapshot commands.
* virsh-snapshot.c: New file, filled with domain snapshot commands.
* po/POTFILES.in: Add virsh-snapshot.c
* cfg.mk: Skip strcase and config.h including checking for
virsh-snapshot.c
Commands to manage secret are moved from virsh.c to virsh-secret.c,
with a few helpers for secret command use.
* virsh.c: Remove secret commands and a few helpers.
(vshCommandOptSecret, and vshCommandOptSecretBy)
* virsh-secret.c: New file, filled with secret commands and its helpers.
* po/POTFILES.in: Add virsh-secret.c
* cfg.mk: Skip to check config.h including for virsh-secret.c
Commands to manage network filter are moved from virsh.c to virsh-nwfilter.c,
with a few helpers for network filter command use.
* virsh.c: Remove network filter commands and a few helpers.
(vshCommandOptNWFilter, and vshCommandOptNWFilterBy)
* virsh-nwfilter.c: New file, filled with network filter commands and its helpers.
* po/POTFILES.in: Add virsh-nwfilter.c
* cfg.mk: Skip to check config.h including for virsh-nwfilter.c
Commands to manage host interface are moved from virsh.c to
virsh-interface.c, with a few helpers for interface command use.
* virsh.c: Remove interface commands and a few helpers.
(vshCommandOptInterface, vshCommandOptInterfaceBy)
* virsh-interface.c: New file, filled with interface commands and
its helpers.
* cfg.mk: Skip to check config.h including for virsh-interface.c
* po/POTFILES.in: Add virsh-interface.c
Commands to manage network are moved from virsh.c to virsh-network.c,
with a few helpers for network command use.
* virsh.c: Remove network commands and a few helpers.
* virsh-network.c: New file, filled with network commands and its
helpers.
* po/POTFILES.in: Add virsh-network.c
* cfg.mk: Skip to check config.h including for virsh-network.c
This splits commands of storage pool group into virsh-pool.c,
The helpers not for common use are moved too. Standard copyright
is added for the new file.
* tools/virsh.c:
Remove commands for storage storage pool and a few helpers.
(vshCommandOptVol, vshCommandOptVolBy).
* tools/virsh-pool.c:
New file, filled with commands of storage pool group and its
helpers.
* po/POTFILES.in:
Add virsh-pool.c
* cfg.mk:
Skip to check config.h including for virsh-pool.c
This splits commands of storage volume group into virsh-volume.c,
The helpers not for common use are moved too. Standard copyright
is added for the new file.
* tools/virsh.c:
Remove commands for storage storage volume and a few helpers.
(vshCommandOptVol, vshCommandOptVolBy).
* tools/virsh-volume.c:
New file, filled with commands of storage volume group and its
helpers.
* po/POTFILES.in:
Add virsh-volume.c
* cfg.mk:
Skip to check config.h including for virsh-volume.c
This splits commands to manage domain into virsh-domain.c,The helpers
not for common use are moved into them too. Standard copyright is added
for the new file.
* tools/virsh.c:
- Remove commands for domain group, and one helper
(vshDomainVcpuStateToString)
- vshStreamSink is moved before commands's definition for it's
also used by commands not of domain group, such as volUpload.
* tools/virsh-domain.c:
- New file, commands for domain group and the one helper are
moved into it.
* po/POTFILES.in:
- Add virsh-domain.c
* cfg.mk:
- Skip to check config.h including for virsh-domain.c
This splits commands commands to monitor domain status into
virsh-domain-monitor.c. The helpers not for common use are moved too.
Standard copyright is added.
* tools/virsh.c:
- Remove commands for domain monitoring group and a few helpers (
vshDomainIOErrorToString, vshGetDomainDescription,
vshDomainControlStateToString, vshDomainStateToString) not for
common use.
- Remove (incldue "intprops.h").
* tools/virsh-domain-monitor.c:
- New file, filled with commands of domain monitor group.
- Add "intprops.h".
* cfg.mk:
- Skip strcase checking for virsh-domain-monitor.c
- Skip to check config.h including for virsh-domain-monitor.c
* po/POTFILES.in
- Add virsh-domain-monitor.c
The copyright dates in the manpages haven't been updated in awhile.
Also, when pod2man converts a pod file into a manpage, it will only
remove the extension from the filename if it is ".pod". Some of the
libvirt pod files are named *.pod.in, and that filename is placed
unchanged into the manpage. This patch uses pod2man's --name option to
fix that.
Believe it or not, there's even a BZ for this:
https://bugzilla.redhat.com/show_bug.cgi?id=819364
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').
Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:
src/security/security_selinux.h
src/security/security_driver.h
src/security/security_selinux.c
src/security/security_apparmor.h
src/security/security_apparmor.c
src/security/security_driver.c
This patch brings support to manage sheepdog pools and volumes to libvirt.
It uses the "collie" command-line utility that comes with sheepdog for that.
A sheepdog pool in libvirt maps to a sheepdog cluster.
It needs a host and port to connect to, which in most cases
is just going to be the default of localhost on port 7000.
A sheepdog volume in libvirt maps to a sheepdog vdi.
To create one specify the pool, a name and the capacity.
Volumes can also be resized later.
In the volume XML the vdi name has to be put into the <target><path>.
To use the volume as a disk source for virtual machines specify
the vdi name as "name" attribute of the <source>.
The host and port information from the pool are specified inside the host tag.
<disk type='network'>
...
<source protocol="sheepdog" name="vdi_name">
<host name="localhost" port="7000"/>
</source>
</disk>
To work right this patch parses the output of collie,
so it relies on the raw output option. There recently was a bug which caused
size information to be reported wrong. This is fixed upstream already and
will be in the next release.
Signed-off-by: Sebastian Wiedenroth <wiedi@frubar.net>
Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer
then replace raw MAC addresses by replacing
- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr
and introduce usage of above functions where necessary.
Fix for a minor issue:
the sleep(1) statement was called twice,
effectively doubling the elapsed time
execution "virsh nodecpustats --percent".
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
When --direct is used when migrating a domain running on a hypervisor
that does not support direct migration (such as QEMU), the caller would
get the following error message:
this function is not supported by the connection driver:
virDomainMigrateToURI2
which is a complete nonsense since qemu driver implements
virDomainMigrateToURI2. This patch would emit a more sensible error in
this case:
Requested operation is not valid: direct migration is not supported
by the connection driver
Instead of changing the existed virFileMakePath to accept mode
argument and modifying a pile of its uses, this patch introduces
virFileMakePathWithMode, and use it instead of mkdir() to create
the readline history dir.
In vshSnapshotListCollect() vshCalloc was called with swapped nmemb and
size argument. This caused division by zero in xalloc_oversized as the
macro doesn't expect size to be zero.
Fixed up virsh -V output by removing invalid WITH_PROXY & WITH_ONE
checks, adding several missing checks, and fixing the DTrace check.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
v2:
- Refactored to use virBuffer
- Refactored to use virXPath wrappers
- Added support for tls-port and password for SPICE
- Added optional flag to disable SPICE password to the URI
- Added support for RDP
- Fixed code reviews
Add a new 'domdisplay' command that provides a URI for VNC, SPICE and
RDP connections. Presently the 'vncdisplay' command provides you with
the port info that QEMU is listening on but there is no counterpart for
SPICE and RDP. Additionally this provides you with the bind address as
specified in the XML, which the existing 'vncdisplay' lacks. For SPICE
connections it supports secure and unsecure channels and optionally
providing the password for the SPICE channel.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Storage is one of the last domains in libvirt where we don't fully
utilize inactive and live XML. Okay, it might be because we don't
have support for that. So implement such support. However, we need
to fallback when talking to old daemon which doesn't support this
new flag called VIR_STORAGE_XML_INACTIVE.
The vshPrintRaw function is not used on Win32, and neither
is the 'msg' parameter of vshAskReedit. Change the nesting
of #ifdef WIN32 conditionals to address this
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the vncdisplay command to use the virXPath wrappers as well as
check if the domain is up rather than using the port set to -1 to mean
the domain is not up.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
This patch adds a check for the count of processors the user requests
for the guest machine so that invalid values produce a more helpful
error message.
This patch makes use of the newly added api virConnectListAllDomains()
to list domains in virsh.
Virsh now represents lists of domains using an internal structure
vshDomainList. This structure contains the virDomainPtr list as provided
by virConnectListAllDomains() and the count of domains in the list.
For backwards compatibility, the function vshDomainListCollect was added
that tries to enumerate the domains using the new API and if the API is
not supported falls back to the older approach with the two list
functions. The helper function also simulates filtering by all
currently supported flags added with virConnectListAllDomains().
This patch also cleans up the "list" command handler to use the new
helpers and adds new command line flags to make use of filtering.
Previously, to get the name of all snapshots with children, it was
necessary to get the name of all snapshots and then remove the
name of leaf snapshots. This is racy, and somewhat inefficient
compared to planned API additions. We can emulate --no-metadata on
0.9.5-0.9.12, but for now, there is no emulation of --no-leaves.
* tools/virsh.c (cmdSnapshotList): Add new options --no-leaves and
--no-metadata.
(vshSnapshotList): Emulate where possible.
* tools/virsh.pod (snapshot-list): Document them.
Append '(MAC Address)' after the help string of domiftune virsh
command as it takes the same type of argument as domif-{get,set}link
which have it specified.
as we are missing:
attach-disk: --type can accept 'lun' too, not just cdrom or floppy.
attach-disk: --target specify logical device name, not path
attach-interface: --target silently drops strings with vnet* prefix
Operating on a list of snapshot objects looks so much simpler.
In particular, since the helper function already trimmed out
irrelevant entries, we no longer have quite so many special cases
on finding the first snapshot to operate on. Also, vshTreePrint
no longer has a generic callback struct; both clients now pass
something different according to their own needs.
* tools/virsh.c (cmdSnapshotList): Use previous patches.
(vshTreeArrayLookup): Rename...
(vshNodeListLookup): ...now that it only has one client.
(cmdNodeListDevices): Adjust caller.
This patch is based on the fallback code out of cmdSnapshotList,
with tweaks to keep the snapshot objects around rather than just
their name, and to remove unwanted elements before returning.
It looks forward to a future patch when we add a way to list all
snapshot objects at once, and the next patch will simplify
cmdSnapshotList to take advantage of this factorization.
* tools/virsh.c (vshSnapshotList, vshSnapshotListFree): New functions.
Detected by valgrind:
==16217== 1 errors in context 1 of 12:
==16217== Invalid read of size 1
==16217== at 0x4A07804: __GI_strlen (mc_replace_strmem.c:284)
==16217== by 0x3019F167F6: xdr_string (in /lib64/libc-2.12.so)
==16217== by 0x3033709E8D: xdr_remote_nonnull_string (remote_protocol.c:31)
==16217== by 0x303370E5CB: xdr_remote_domain_update_device_flags_args (remote_protocol.c:2028)
==16217== by 0x30337197D1: virNetMessageEncodePayload (virnetmessage.c:341)
==16217== by 0x30337135E1: virNetClientProgramCall (virnetclientprogram.c:327)
==16217== by 0x30336F1EFD: callWithFD (remote_driver.c:4586)
==16217== by 0x30336F1F7B: call (remote_driver.c:4607)
==16217== by 0x30336F42F2: remoteDomainUpdateDeviceFlags (remote_client_bodies.h:2865)
==16217== by 0x30336D46E5: virDomainUpdateDeviceFlags (libvirt.c:9457)
==16217== by 0x41AEE8: cmdChangeMedia (virsh.c:15249)
==16217== by 0x413CB4: vshCommandRun (virsh.c:18669)
==16217== Address 0x4ec5e25 is 0 bytes after a block of size 293 alloc'd
==16217== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==16217== by 0x303364F1DB: virAllocN (memory.c:129)
==16217== by 0x41A844: vshPrepareDiskXML (virsh.c:15043)
==16217== by 0x41AECC: cmdChangeMedia (virsh.c:15246)
==16217== by 0x413CB4: vshCommandRun (virsh.c:18669)
==16217== by 0x423973: main (virsh.c:20261)
There is a little easter egg in virsh: one can easily clone
an object (domain, network, ...). Just 'virsh edit' change the name
and remove <uuid>. And then, in the end when reporting success
the new name was printed out.
However, with recent edit rewrite we lost the final part and are
still printing the original name out.
When printing reedit options we make stdin raw. However,
this results in stdout being raw as well. Therefore we need
to return carriage when doing new line. Unfortunately,
'\r' cannot be part of internationalized messages hence
we must move them to formatting string which then in turn
become huge and disarranged. To solve this, a new function
is introduced which takes variable string arguments and
prepend each with "\r\n" just before printing.
The attach-disk command used with parameter --cache created an invalid
XML snippet as the beginning of the <driver> element was not printed
when used solely with --cache and no other attribute to driver.
commit 52d064f42d added
VIR_NETWORK_XML_INACTIVE in order to allow suppressing the
auto-generated list of VFs in network definitions, and a --inactive
flag to virsh net-dumpxml to take advantage of the flag. However, it
missed out on two opportunities:
1) Use INACTIVE to get the current config of the network as it
exists on disk, rather than the currently active config.
2) Add INACTIVE to the flags used for the virsh net-edit command, so
that it won't include the forward-pool interfaces that were
autogenerated, and so that a re-edit of the network prior to
restarting it will show any other edits made since the last restart
of the network. (prior to this patch, if you edited a network a 2nd
time without restarting, all of the previous edits would magically
disappear).
In order to fit with the new #define-based generic edit function in
virsh.c, a new function vshNetworkGetXMLDesc() was added. This
function first tries to call virNetworkGetXMLDesc with the INACTIVE
flag added, then retries without if the first attempt fails (in the
manner expected when the server doesn't support it).
Expose the recent API additions in virsh. Borrows ideas from 'dominfo'
for the general type of information to display.
Output looks like:
$ tools/virsh snapshot-info fedora-local tmp
Name: tmp
Domain: fedora-local
Current: no
State: disk-snapshot
Parent: -
Children: 1
Descendants: 2
Metadata: yes
possibly with fewer lines when talking to older servers.
* tools/virsh.c (cmdSnapshotInfo): New command.
* tools/virsh.pod (snapshot-info): Document it.
Requiring the user to pass in parallel arrays of names and parents
is annoying; it means that you can't qsort one of the arrays without
invalidating the ordering of the other. By refactoring this function
to use callbacks, we isolate the layout to be independent of the
printing, and a future patch can exploit that to improve layout.
* tools/virsh.c (vshTreePrintInternal): Use callbacks rather than
requiring a char** array.
(vshTreeArrayLookup): New helper function.
(vshTreePrint, cmdNodeListDevices, cmdSnapshotList): Update callers.
I am not a fan of fixed-width buffers. All it takes is a
linear chain of more than 100 snapshots to mess up 'virsh
snapshot-list --tree'. Now that virBuffer is more powerful,
we might as well exploit its power.
* tools/virsh.c (cmdNodeListDevicesPrint): Simplify to use a
virBuffer instead of fixed-width prefix, factor guts, and rename...
(vshTreePrint, vshTreePrintInternal): ...along with new helper.
(cmdNodeListDevices, cmdSnapshotList): Update callers.
Commits 51082301, 16d7b39, and 521cc447 introduced support for
'virsh snapshot-list --from' when talking to a server older than
0.9.5, but broke support for plain 'virsh snapshot-list' for the
same old server in the process. Because the code is not properly
gated, we end up with a SIGSEGV during a strcmp with a NULL argument.
* tools/virsh.c (cmdSnapshotList): Don't waste time on fallbacks
when --from is not present.
If you compile without NLS support, where _() is a no-op macro,
then we end up passing a string literal to a char*, provoking:
In file included from virsh.c:3639:0:
virsh-edit.c: In function ‘cmdSaveImageEdit’:
virsh-edit.c:97:13: error: assignment discards ‘const’ qualifier from pointer target type [-Werror]
virsh-edit.c:106:13: error: assignment discards ‘const’ qualifier from pointer target type [-Werror]
* tools/virsh-edit.c: Be const-safe.
If users *-edit but make a mistake in XML all changes are
permanently lost. However, if virsh is not running within
a script we can ask user if he wants to re-edit the file
and correct the mistakes.
Currently, we either generate some cmd*Edit commands (cmdPoolEdit
and cmdNetworkEdit) via sed script or copy the body of cmdEdit
(e.g. cmdInterfaceEdit, cmdNWFilterEdit, etc.). This fact makes
it harder to implement any new feature to our editing system.
Therefore switch to new implementation - define macros to:
- dump XML (EDIT_GET_XML)
- take an action if XML wasn't changed,
usually just vshPrint() (EDIT_NOT_CHANGED)
- define new object (EDIT_DEFINE) - the edited XML is in @doc_edited
- free object defined by EDIT_DEFINE (EDIT_FREE)
and #include "virsh-edit.c"
strncpy is generally evil - it runs the risk of missing NUL
termination, and more often than not wastes time zeroing way
more bytes than strictly necessary. We've avoided this evil
in our virStrncpy wrapper, except for places where we forgot
to use the wrapper; meanwhile, we have also added an even
higher layer wrapper for setting virTypedParameter values.
* tools/virsh.c (cmdMemtune, cmdBlkdeviotune): Use modern API.
* cfg.mk (exclude_file_name_regexp--sc_prohibit_strncpy): Tighten.
Remove the uid param from virGetUserConfigDirectory,
virGetUserCacheDirectory, virGetUserRuntimeDirectory,
and virGetUserDirectory
These functions were universally called with the
results of getuid() or geteuid(). To make it practical
to port to Win32, remove the uid parameter and hardcode
geteuid()
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove a number of pointless checks against PATH_MAX and
add a syntax-check rule to prevent its use in future
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch adds support for a new storage backend with RBD support.
RBD is the RADOS Block Device and is part of the Ceph distributed storage
system.
It comes in two flavours: Qemu-RBD and Kernel RBD, this storage backend only
supports Qemu-RBD, thus limiting the use of this storage driver to Qemu only.
To function this backend relies on librbd and librados being present on the
local system.
The backend also supports Cephx authentication for safe authentication with
the Ceph cluster.
For storing credentials it uses the built-in secret mechanism of libvirt.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Currently virDomainGetCPUStats gets total cpu usage, which consists
of:
1. vcpu usage: the physical cpu time consumed by virtual cpu(s) of
domain
2. hypervisor: `total cpu usage' - `vcpu usage'
The param 'vcpu_time' is for getting vcpu usages.
$LISTFILE is created even no domain is running, and the empty
$LISTFILE could cause improper service status.
stopped ,with saved guests
Which is not right, as there is no domain was saved.
As defined in:
http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html
This offers a number of advantages:
* Allows sharing a home directory between different machines, or
sessions (eg. using NFS)
* Cleanly separates cache, runtime (eg. sockets), or app data from
user settings
* Supports performing smart or selective migration of settings
between different OS versions
* Supports reseting settings without breaking things
* Makes it possible to clear cache data to make room when the disk
is filling up
* Allows us to write a robust and efficient backup solution
* Allows an admin flexibility to change where data and settings are stored
* Dramatically reduces the complexity and incoherence of the
system for administrators
* tools/virsh.c (vshParseSnapshotDiskspec): Fix off-by-3 memmove
that would corrupt heap when parsing escaped --diskspec comma.
Bug introduced via commit v0.9.4-260-g35d52b5.
The recent push to use correct scaling terms (kB for 1000, KiB for
1024 - such as commit 9dfdead) missed some places in virsh.
* tools/virsh.c (prettyCapacity, cmdDominfo, cmdFreecell)
(cmdNodeinfo, cmdNodeMemStats, cmdMigrateSetMaxSpeed)
(cmdBlockCopy, cmdBlockPull, cmdBlockJob): Use KiB, not kB, when
referring to multiples of 1024.
* tests/virshtest.c: Update expected output to match.
https://bugzilla.redhat.com/show_bug.cgi?id=817244 mentions that
unlike most other tools, where --help or --version prevent all
further parsing of all later options, virsh was strange in that
--version stopped parsing but --help tried to plow on to the end.
There was no rationale for this original implementation (since
2005!), so I think we can safely conform to common usage patterns.
* tools/virsh.c (main): Drop useless 'help' variable.
Rather than further overloading 'blockpull', I decided to create a
new virsh command to expose the new flags of virDomainBlockRebase.
Blocking until the command completes naturally is pointless, since
the block copy job is intended to run indefinitely. Instead, I
made the command support three --wait modes: by default, it runs until
mirroring is started; with --pivot, it pivots as soon as mirroring
is started; and with --finish, it aborts (for a clean copy) as
soon as mirroring is started.
* tools/virsh.c (VSH_CMD_BLOCK_JOB_COPY): New mode.
(blockJobImpl): Support new flags.
(cmdBlockCopy): New command.
(cmdBlockJob): Support new job info, new abort flag.
* tools/virsh.pod (blockcopy, blockjob): Document the new command
and flags.
We were forgetting to check errno for overflow.
* tools/virsh.c (get_integer_keycode, vshCommandOptInt)
(vshCommandOptUInt, vshCommandOptUL, vshCommandOptLongLong)
(vshCommandOptULongLong): Rewrite to be safer.
I'm tired of shell-scripting to wait for completion of a block pull,
when virsh can be taught to do the same. I couldn't quite reuse
vshWatchJob, as this is not a case of a long-running command where
a second thread must be used to probe job status (at least, not unless
I make virsh start doing blocking waits for an event to fire), but it
served as inspiration for my simpler single-threaded loop. There is
up to a half-second delay between sending SIGINT and the job being
aborted, but I didn't think it worth the complexity of a second thread
and use of poll() just to minimize that delay.
* tools/virsh.c (cmdBlockPull): Add new options to wait for
completion.
(blockJobImpl): Add argument.
(cmdBlockJob): Adjust caller.
* tools/virsh.pod (blockjob): Document new mode.
Block job cancellation can take a while. Now that upstream qemu 1.1
has asynchronous block cancellation, we want to expose that to the user.
Therefore, the following updates are made to the virDomainBlockJob API:
A new block job event type VIR_DOMAIN_BLOCK_JOB_CANCELED is managed by
libvirt. Regardless of the flags used with virDomainBlockJobAbort, this
event will be raised: 1. when using synchronous block_job_cancel (the
event will be synthesized by libvirt), and 2. whenever it is received
from qemu (via asynchronous block-job-cancel). Note that the event
may be detected by libvirt even before the virDomainBlockJobAbort
completes (always true when it is synthesized, but also possible if
cancellation was fast).
A new extension flag VIR_DOMAIN_BLOCK_JOB_ABORT_ASYNC is added to the
virDomainBlockJobAbort API. When enabled, this function will allow
(but not require) asynchronous operation (ie, it returns as soon as
possible, which might be before the job has actually been canceled).
When the API is used in this mode, it is the responsibility of the
caller to wait for a VIR_DOMAIN_BLOCK_JOB_CANCELED event or poll via
the virDomainGetBlockJobInfo API to check the cancellation status.
This patch also exposes the new flag through virsh, and makes virsh
slightly easier to use (--async implies --abort, and lack of any options
implies --info), although it leaves the qemu implementation for later
patches.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch cleans up variables used to store boolean command flags that
are inquired by vshCommandOptBool to use the bool data type instead of
an integer.
Additionally this patch cleans up flag variables that are inferred from
existing flags.
The documentation for the flag doesn't clearly state that the flag only
enhances the output and the user needs to specify other flags to list
inactive domains, that are enhanced by this flag.
Currently, we put no strains on escape sequence possibly leaving users
with console that cannot be terminated. However, not all ASCII
characters can be used as escape sequence. Only those falling in
@ - _ can be; implement and document this constraint.
The code is splattered with a mix of
sizeof foo
sizeof (foo)
sizeof(foo)
Standardize on sizeof(foo) and add a syntax check rule to
enforce it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Leaks are introduced in commit 1cf0e3d and fe383bb.
Fixing memory leaks, in addition, the patch also fixes a potential missing
return value issue in 'if (from)' statement, without the fixing, although
the programming met a error, the subsequent codes will be executed
continually.
* tools/virsh.c (cmdSnapshotList): fix memory leaks and missing return value.
* How to reproduce?
% virsh snapshot-list <domain> --parent --roots
% virsh snapshot-list <domain> --parent --tree
% virsh snapshot-list <domain> --roots --tree
actual result:
error: --parent and --roots are mutually exclusive
error: Failed to disconnect from the hypervisor, 1 leaked reference(s)
error: --parent and --tree are mutually exclusive
error: Failed to disconnect from the hypervisor, 1 leaked reference(s)
error: --roots and --tree are mutually exclusive
error: Failed to disconnect from the hypervisor, 1 leaked reference(s)
% virsh snapshot-create-as <domain> --name "hello"
% virsh snapshot-create-as <domain> --name "libvirt"
% virsh snapshot-list <domain> --roots --from "hello"
actual result:
error: --roots and --from are mutually exclusive
Name Creation Time State
------------------------------------------------------------
libvirt 2012-03-28 13:46:51 +0800 running
Signed-off-by: Alex Jia <ajia@redhat.com>
Commit d42a2ff forgot to touch up virsh documentation, and commit
4e9953a mis-spelled the option name.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Fix typo
and match recent change in flag meaning.
Found when attempting to build on Fedora 17 alpha with:
./autogen.sh --system --enable-compile-warnings=error
(this same build command works without problem on Fedora 16). All
other struct initializers for this struct have the extra field filled
in (almost always to 0), so the two errant ones were fixed by adding
in the extra 0 field.
Return statements with parameter enclosed in parentheses were modified
and parentheses were removed. The whole change was scripted, here is how:
List of files was obtained using this command:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$'
Found files were modified with this command:
sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
Then checked for nonsense.
The whole command looks like this:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$' | xargs sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
Right now, it is appallingly easy to cause qemu disk snapshots
to alter a domain then fail; for example, by requesting a two-disk
snapshot where the second disk name resides on read-only storage.
In this failure scenario, libvirt reports failure, but modifies
the live domain XML in-place to record that the first disk snapshot
was taken; and places a difficult burden on the management app
to grab the XML and reparse it to see which disks, if any, were
altered by the partial snapshot.
This patch adds a new flag where implementations can request that
the hypervisor make snapshots atomically; either no changes to
XML occur, or all disks were altered as a group. If you request
the flag, you either get outright failure up front, or you take
advantage of hypervisor abilities to make an atomic snapshot. Of
course, drivers should prefer the atomic means even without the
flag explicitly requested.
There's no way to make snapshots 100% bulletproof - even if the
hypervisor does it perfectly atomic, we could run out of memory
during the followup tasks of updating our in-memory XML, and report
a failure. However, these sorts of catastrophic failures are rare
and unlikely, and it is still nicer to know that either all
snapshots happened or none of them, as that is an easier state to
recover from.
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_CREATE_ATOMIC): New flag.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.
* tools/virsh.c (cmdSnapshotCreate, cmdSnapshotCreateAs): Expose it.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
it.
This introduces a new running reason VIR_DOMAIN_RUNNING_WAKEUP,
and new suspend event type VIR_DOMAIN_EVENT_STARTED_WAKEUP.
While a wakeup event is emitted, the domain which entered into
VIR_DOMAIN_PMSUSPENDED will be transferred to "running"
with reason VIR_DOMAIN_RUNNING_WAKEUP, and a new domain lifecycle
event emitted with type VIR_DOMAIN_EVENT_STARTED_WAKEUP.
This introduces a new domain state pmsuspended to represent
the domain which has been suspended by guest power management,
e.g. (entered itno s3 state). Because a "running" state could
be confused in this case, one will see the guest is paused
actually while playing. And state "paused" is for the domain
which was paused by virDomainSuspend.
virsh.pod had several instances in which it referred to "the
documentation" which was a little puzzling to me since it is
documentation. Reading the document from end to end makes it clear
that it means a specific URI which was noted previously in the text,
but I had never noticed those URIs in several years of referring to
the man page. This patch adds those URIs to several additional places
in the text.
Currently if the URI passed to virConnectOpen* is NULL, then we
- Look for LIBVIRT_DEFAULT_URI env var
- Probe for drivers
This changes it so that
- Look for LIBVIRT_DEFAULT_URI env var
- Look for 'uri_default' in $HOME/.libvirt/libvirt.conf
- Probe for drivers
Thanks to cgroups, providing user vs. system time of the overall
guest is easy to add to our existing API.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_CPU_STATS_USERTIME)
(VIR_DOMAIN_CPU_STATS_SYSTEMTIME): New constants.
* src/util/virtypedparam.h (virTypedParameterArrayValidate)
(virTypedParameterAssign): Enforce checking the result.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Fix offender.
(qemuDomainGetTotalcpuStats): Implement new parameters.
* tools/virsh.c (cmdCPUStats): Tweak output accordingly.
Since VIR_DOMAIN_AFFECT_{LIVE,CONFIG,CURRENT} was created,
all new virsh commands use "--config" to represents the
persistent changing. This patch add "--config" option
for the old commands which still use "--persistent",
and "--persistent" is now alias of "--config".
tools/virsh.c: (use "--config", and "--persistent" is
alias of "--config" now).
cmdDomIfSetLink, cmdDomIfGetLink, cmdAttachDevice,
cmdDetachDevice, cmdUpdateDevice, cmdAttachInterface,
cmdDetachInterface, cmdAttachDisk, cmdDetachDisk
toos/virsh.pod: Update docs of the changed commands, and
add some missed docs for "--config" (detach-interface,
detach-disk, and detach-device).
The last vestige of the inaccurate 'kilobytes' when we meant 1024 is
now gone. And virsh is now useful for setting memory in units other
than KiB.
* tools/virsh.c (cmdSetmem, cmdSetmaxmem): Use new helper routine,
allow passing bogus arguments on to hypervisor to test driver
sanity checking, and fix leak on parse error.
(vshMemtuneGetSize): New helper.
(cmdMemtune): Use it.
* tools/virsh.pod (setmem, setmaxmem, memtune): Document this.
Now can now do:
virsh vol-resize $vol 10M
virsh blockresize $dom $vol 10M
to get both interfaces to resize to 10MiB. The remaining wart
is that vol-resize defaults to bytes, but blockresize defaults
to KiB, but we can't break existing scripts; oh well, it's no
worse than the same wart of the underlying virDomainBlockResize.
The API for virStorageVolResize states that capacity must always
be positive, and that the presence of shrink and delta flags is
what implies a negative change.
* tools/virsh.c (vshCommandOptScaledInt): New function.
(cmdVolResize): Don't pass negative size.
(cmdVolSize): Rename...
(vshVolSize): ...and use new helper routine.
(cmdBlockResize): Use new helper routine, and support new bytes
flag.
* tools/virsh.pod (NOTES): Document suffixes.
(blockresize, vol-create-as, vol-resize): Point to notes.
Just because our public API has a typo doesn't mean that virsh
has to keep the typo.
* tools/virsh.c (VSH_CMD_FLAG_ALIAS): New flag.
(nodedevCmds): Use it.
(cmdHelp): Omit alias commands.
(cmdNodeDeviceDettach): Rename...
(cmdNodeDeviceDetach): ...to this.
* tools/virsh.pod (nodedev-detach): Document it.
Command line interfaces should use dash, not underscore, as many
keyboard layouts allow that to be typed with fewer shift key presses.
Also, the US spelling of --tunneled gets more google hits than the
UK spelling of --tunnelled.
* tools/virsh.c (opts_migrate): Allow US variant.
(opts_blkdeviotune): Prefer - over _.
* tools/virsh.pod (blkdeviotune): Fix spelling.
In the past, we have created some virsh options with less-than-stellar
names. For back-compat reasons, those names must continue to parse,
but we don't want to document them in help output. This introduces
a new option type, an alias, which points to a canonical option name
later in the option list.
I'm actually quite impressed that our code has already been factored
to do all option parsing through common entry points, such that I
got this added in relatively few lines of code!
* tools/virsh.c (VSH_OT_ALIAS): New option type.
(opts_echo): Hook up an alias, for easy testing.
(vshCmddefOptParse, vshCmddefHelp, vshCmddefGetOption): Allow for
aliases.
* tools/virsh.pod (NOTES): Document promise of back-compat.
* tests/virshtest.c (mymain): Test new feature.
With this patch, it's possible to shut down guests in parallel. Parallel
startup was possible before, but this functionality was not documented
properly.
To enable parallel startup set the START_DELAY to 0.
Parallel shutdown has a configurable parameter PARALLEL_SHUTDOWN that
defines the number of machines being shut down in parallel. Enabling
this feature changes the semantics of SHUTDOWN_TIMEOUT parameter that is
applied as a cumulative timeout to shutdown all guests on a URI.
No thanks to 64-bit windows, with 64-bit pid_t, we have to avoid
constructs like 'int pid'. Our API in libvirt-qemu cannot be
changed without breaking ABI; but then again, libvirt-qemu can
only be used on systems that support UNIX sockets, which rules
out Windows (even if qemu could be compiled there) - so for all
points on the call chain that interact with this API decision,
we require a different variable name to make it clear that we
audited the use for safety.
Adding a syntax-check rule only solves half the battle; anywhere
that uses printf on a pid_t still needs to be converted, but that
will be a separate patch.
* cfg.mk (sc_correct_id_types): New syntax check.
* src/libvirt-qemu.c (virDomainQemuAttach): Document why we didn't
use pid_t for pid, and validate for overflow.
* include/libvirt/libvirt-qemu.h (virDomainQemuAttach): Tweak name
for syntax check.
* src/vmware/vmware_conf.c (vmwareExtractPid): Likewise.
* src/driver.h (virDrvDomainQemuAttach): Likewise.
* tools/virsh.c (cmdQemuAttach): Likewise.
* src/remote/qemu_protocol.x (qemu_domain_attach_args): Likewise.
* src/qemu_protocol-structs (qemu_domain_attach_args): Likewise.
* src/util/cgroup.c (virCgroupPidCode, virCgroupKillInternal):
Likewise.
* src/qemu/qemu_command.c(qemuParseProcFileStrings): Likewise.
(qemuParseCommandLinePid): Use pid_t for pid.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* src/conf/domain_conf.h (_virDomainObj): Likewise.
* src/probes.d (rpc_socket_new): Likewise.
* src/qemu/qemu_command.h (qemuParseCommandLinePid): Likewise.
* src/qemu/qemu_driver.c (qemudGetProcessInfo, qemuDomainAttach):
Likewise.
* src/qemu/qemu_process.c (qemuProcessAttach): Likewise.
* src/qemu/qemu_process.h (qemuProcessAttach): Likewise.
* src/uml/uml_driver.c (umlGetProcessInfo): Likewise.
* src/util/virnetdev.h (virNetDevSetNamespace): Likewise.
* src/util/virnetdev.c (virNetDevSetNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* src/conf/storage_conf.h (_virStoragePerms): Use mode_t, uid_t,
and gid_t rather than int.
* src/security/security_dac.c (virSecurityDACSetOwnership): Likewise.
* src/conf/storage_conf.c (virStorageDefParsePerms): Avoid
compiler warning.
Now virsh can call virDomainBlockRebase.
* tools/virsh.c (cmdBlockPull): Add --base parameter.
(blockJobImpl): Use it to expose BlockRebase API.
* tools/virsh.pod (blockpull): Document it.
This patch adds a check to the libvirt-guests script to check for the
URI to be alive before attempting any calls. This avoids nasty error
messages and allows us to fail gracefully and continue on other URIs
configured in the script.
The libvirt-guests script tried to do a managed save of transient guest
that failed. This patch notifies which guests are transient (and not
being saved) and saves only the persistent ones.
This patch adds documentation to functions defined in the libvirt-guests
init script and changes use of virsh's new commands to make the script
easier.
The current scrub version doesn't support pfitzner7, pfitzner33 and schneier
patterns on RHEL, we should comment it in virsh man page.
* tools/virsh.pod: update wiping algorithms docs.
Signed-off-by: Alex Jia <ajia@redhat.com>
vshFindDisk is to find the disk node in xml doc with given source
path or target of disk device, and type (indicates disk type,
normal disk or changeable disk).
vshPrepareDiskXML is to make changes on the disk node (e.g. create
and insert the new <source> node for inserting media of CDROM drive).
They are marked as unused temporarily.
This patch adds support for the newly introduced
VIR_DOMAIN_CONSOLE_FORCE and VIR_DOMAIN_CONSOLE_SAFE flags. The console
command now has an optional parameter --force that specifies that the
user wants to forcibly interrupt an ongoing console session and create
a new one. Flag --safe requests that the console should be opened only
if the hypervisor driver supports safe console handling.
The behaviour to this point was that the daemon opened two streams to
the console, that competed for data from the pipe, and the result was
that both of the consoles ended up scrambled.
This patch doesn't modify operation of other commands dealing with
console connections (start, create) as those open connections to newly
started domains making it virtually impossible for another client to race
for the console and steal it.
* tools/console.c:
- add support for flag passthrough
* tools/console.h:
- modify function prototypes to match impl.
* tools/virsh.c:
- add flag --force for the console command
If attempting to run
ssh root@somehost virsh console someguest
You'll get an error
2012-02-15 13:11:47.683+0000: 4765: info : libvirt version: 0.9.10, package: 1.fc18 (Unknown, 2012-02-15-11:48:57, lettuce.camlab.fab.redhat.com)
2012-02-15 13:11:47.683+0000: 4765: error : vshRunConsole:320 : unable to get tty attributes: Invalid argument
Connected to domain f16x86_64
Escape character is ^]
There are several problems here
- The actual error message is bad for users
- We shouldn't rely on VIR_ERROR for this case
- The prompt makes it look like we still connected
because we didn't flush stdout.
* virsh.c: Flush stdout before starting console and check
for a valid tty
This patch adds new options to the "virsh list" command enabling
filtering of persistent and transient domains along with the option to
print only UUIDs or names of domains instead of printing the table.
Option --name prints domain names (one per line) instead of the default
table. Similarly --uuid prints domain's UUID. The option --table is
an alias for the default behavior.
Aditionally --persistent and/or --transient may be specified to filter
the output of domains.
Commit fad5cd2108 introduced option to
display domain's title in the list command output. There was a mistake
in the virsh man page example for this command stating --note instead of
--title.
When blkdeviotune was first committed in 0.9.8, we had the limitation
that setting one value reset all others. But bytes and iops should
be relatively independent. Furthermore, setting tuning values on
a live domain followed by dumpxml did not output the new settings.
* src/qemu/qemu_driver.c (qemuDiskPathToAlias): Add parameter, and
update callers.
(qemuDomainSetBlockIoTune): Don't lose previous unrelated
settings. Make live changes reflect to dumpxml output.
* tools/virsh.pod (blkdeviotune): Update documentation.
