Learn to parse a file path for the TPM state.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Mechanically replace existing 'storagepath' with 'source_path', as the
following patches introduce <source path='..'> configuration.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Domain capabilities include information about support for various
devices and models.
Panic devices are not included in the output which means that management
applications need to include the logic for choosing the right device
model or request a default model and try defining such a domain.
Add reporting of panic device models into the domain capabilities based
on the logic in qemuValidateDomainDefPanic() and also report whether
panic devices are supported based on whether at least one model is
supported. That way consumers of the domain capability XML can
differentiate between libvirt not reporting the panic device models or
no model being supported.
Resolves: https://issues.redhat.com/browse/RHEL-65187
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The recent attempt to fix the attributes used wrong mode for some
directories used by the QEMU driver. Only dbus and swtpm directories use
770, all other directories are created with 755.
Fixes: 961fb8944d
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add an error message for the rare case if json_tokener_new
fails (allocation failure) and guard any use of json_tokener_free
where tok might be NULL (this was possible in libvirt-nss
when the json file could not be opened).
https://gitlab.com/libvirt/libvirt/-/issues/581
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Simon Pilkington
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
The support for the 'sgio' attribute for SCSI-backed devices was dropped
as there wasn't really ever any upstream support for it.
The docs do state that support for this depends on the hypervisor
itself, but we can be more clear that there is no hypervisor which does
support it.
There is also a suggestion to use 'sgio' instead of 'rawio' as being
more "secure" but since it no longer works drop this suggestion.
Resolves: https://issues.redhat.com/browse/RHEL-65268
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Completely remove use of g_malloc (without zeroing of the allocated
memory) and forbid further use.
Replace use of g_malloc0 in cases where the variable holding the pointer
has proper type.
In all of the above cases we can use g_new0 instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The error message from 'json-c' was passed along without any libvirt
string which makes it hard to find in the source and isn't exactly clear
when present in logs:
libvirtd[843]: internal error : invalid utf-8 string
Prefix the message with 'failed to parse JSON'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We should include maximum physical address size in the CPU definition
created by virConnectBaselineHypervisorCPU only if we know the value for
all input CPUs. Otherwise we would create a CPU definition that is not
usable on all hosts from which we gathered the CPU info.
https://issues.redhat.com/browse/RHEL-24850
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Directories which we dynamically create in %{_rundir} with non-default
attributes (i.e., the owner differs from root:root and/or mode is not
755) fail RPM verification. We should properly declare the expected
ownership and mode in the specfile.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This reverts commit 42ab0148dd.
This patch was supposed to fix the checksum of dhcp response packets
by setting it to 0 (because having a non-0 but incorrect checksum was
causing the packets to be droppe on FreeBSD guests).
Early testing was positive, but after the patch was pushed upstream
and more people could test it, it turned out that while it fixed the
dhcp checksum problem for virtio-net interfaces on FreeBSD and
OpenBSD, it also *broke* dhcp checksums for the e1000 emulated NIC on
*all* guests (but not e1000e).
So we're reverting this fix and looking for something more universal
to be included in the next release.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
The docs for submitting a patch describe using your "Legal Name" with
the Signed-off-by line.
In recent times, there's been a general push back[1] against the notion
that use of Signed-off-by in a project automatically requires / implies
the use of legal ("real") names and greater awareness of the downsides.
Full discussion of the problems of such policies is beyond the scope of
this commit message, but at a high level they are liable to marginalize,
disadvantage, and potentially result in harm, to contributors.
TL;DR: there are compelling reasons for a person to choose distinct
identities in different contexts & a decision to override that choice
should not be taken lightly.
A number of key projects have responded to the issues raised by making
it clear that a contributor is free to determine the identity used in
SoB lines:
* Linux has clarified[2] that they merely expect use of the
contributor's "known identity", removing the previous explicit
rejection of pseudonyms.
* CNCF has clarified[3] that the real name is simply the identity
the contributor chooses to use in the context of the community
and does not have to be a legal name, nor birth name, nor appear
on any government ID.
Since we have no intention of ever routinely checking any form of ID
documents for contributors[4], realistically we have no way of knowing
anything about the name they are using, except through chance, or
through the contributor volunteering the information. IOW, we almost
certainly already have people using pseudonyms for contributions.
This proposes to accept that reality and eliminate unnecessary friction,
by following Linux & the CNCF in merely asking that a contributors'
commonly known identity, of their choosing, be used with the SoB line.
[1] Raised in many contexts at many times, but a decent overall summary
can be read at https://drewdevault.com/2023/10/31/On-real-names.html
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d4563201f33a022fc0353033d9dfeb1606a88330
[3] https://github.com/cncf/foundation/blob/659fd32c86dc/dco-guidelines.md
[4] Excluding the rare GPG key signing parties for regular maintainers
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Many years ago (April 2010), soon after "vhost" in-kernel packet
processing was added to the virtio-net driver, people running RHEL5
virtual machines with a virtio-net interface connected via a libvirt
virtual network noticed that when vhost packet processing was enabled,
their VMs could no longer get an IP address via DHCP - the guest was
ignoring the DHCP response packets sent by the host.
(I've been informed by danpb that the same issue had been encountered,
and "fixed" even earlier than that, in 2006, with Xen as the
hypervisor.)
The "gory details" of the 2010 discussion are chronicled here:
https://lists.isc.org/pipermail/dhcp-hackers/2010-April/001835.html
but basically it was because packet checksums weren't being fully
computed on the host side (because QEMU on the host and the NIC driver
in the guest had agreed between themselves to turn off checksums
because they were unnecessary due to the "link" between the two being
entirely in local memory rather than an error-prone physical cable),
but
1) a partial checksum was being put into the packets at some point by
"someone"
2) the "don't use checksums" info was known by the guest kernel, which
would properly ignore the "bad" checksum), and
3) the packets were being read by the dhclient application on the
guest side with a "raw" socket (thus bypassing the guest kernel UDP
processing that would have known the checksum was irrelevant and
ignore it)),
The "fix" for this ended up being two-tiered:
1) The ISC DHCP package (which contains the aforementioned dhclient
program) made a fix to their dhclient code which caused it to accept
packets anyway even if they didn't have a proper checksum (NB: that's
not a full explanation, and possibly not accurate). This remedied the
problem for guests with an updated dhclient. Here is the code with the
fix to ISC DHCP:
https://github.com/isc-projects/dhcp/blob/master/common/packet.c#L365
This eliminated the issue for any new/updated guests that had the
fixed dhclient, but it didn't solve the problem for existing/old guest
images that didn't/couldn't get their dhclient updated. This brings us
to:
2) iptables added a new "CHECKSUM" target and "--checksum-fill"
action:
http://patchwork.ozlabs.org/patch/58525/
and libvirt added an iptables rule for each virtual network to match
DHCP response packets and perform --checksum-fill. This way by the
time dhclient on the guest read the raw packet, the checksum would be
corrected, and the packet would be accepted. This was pushed upstream
in libvirt commit v0.8.2-142-gfd5b15ff1a.
The word at the time from those more knowledgeable than me was that
the bad checksum problem was really specific to ISC's dhclient running
on Linux, and so once their fix was in use everywhere dhclient was
used, bad checksums would be a thing of the past and the
--checksum-fill iptables rules would no longer be needed (but would
otherwise be harmless if they were still there).
(Plot twist: the dhclient code in fix (1) above apparently is on a
Linux-only code path - this is very important later!)
Based on this information (and also due to the opinion that fixing it
by having iptables modify the packet checksum was really the wrong way
to permanently fix things, i.e. an "ugly hack"), the nftables
developers made the decision to not implement an equivalent to
--checksum-fill in nftables. As a result, when I wrote the nftables
firewall backend for libvirt virtual networks earlier this year, it
didn't add in any rule to "fix" broken UDP checksums (since there was
apparently no equivalent in nftables and, after all, that was fixed
somewhere else 14 years ago, right???)
But last week, when Rich Jones was doing routine testing using a Fedora
40 host (the first Fedora release to use the nftables backend of libvirt's
network driver by default) and a FreeBSD guest, for "some strange
reason", the FreeBSD guest was unable to get an IP address from DHCP!!
https://www.spinics.net/linux/fedora/libvirt-users/msg14356.html
A few quick tests proved that it was the same old "bad checksum"
problem from 2010 come back to haunt us - it wasn't a Linux-only issue
after all.
Phil Sutter and Eric Garver (nftables people) pointed out that, while
nftables doesn't have an action that will *compute* the checksum of a
packet, it *does* have an action that will set the checksum to 0, and
suggested we try adding a "zero the checksum" rule for dhcp response
packets to our nftables ruleset. (Why? Because a checksum value of 0
in a IPv4 UDP packet is defined by RFC768 to mean "no checksum
generated", implying "checksum not needed"). It turns out that this
works - dhclient properly recognizes that a 0 checksum means "don't
bother with the checksum", and accepts the packet as valid.
So to once again fix this timeless bug, this patch adds such a
checksum zeroing rule to the nftables rules setup for each virtual
network.
This has been verified (on a Fedora 40 host) to fix DHCP with FreeBSD
and OpenBSD guests, while not breaking it for Fedora or Windows (10)
guests.
Fixes: b89c4991da
Reported-by: Rich Jones <rjones@redhat.com>
Fix-Suggested-by: Eric Garver <egarver@redhat.com>
Fix-Suggested-by: Phil Sutter <psutter@redhat.com>
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Let us introduce the xml and reply files for QEMU 9.1.0 on s390x.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Any time the firewalld zone for an interface is set, by definition
that removes it from any previous zone that it was in, so there is
really no point in unsetting the zone if it's just going to be
immediately set again.
This is useful because when firewalld reloads its rules, 3 things happen:
1) firewalld flushes *all* firewall rules (including those added by libvirt)
2) firewalld unsets the zones for all interfaces (including those set
by libvirt)
3) firewalld re-adds its own rules, and sets the zone for all the
interfaces it manages
4) firewalld sends a dbus message that libvirt is watching for, and
when libvirt receives that message, it reloads all of the
libvirt-generated rules, and also re-sets the firewalld zone for
the bridge interfaces managed by libvirt.
libvirt accomplishes step 4 by a) calling
networkRemoveFirewallRules(), and then b) calling
networkAddFirewallRules(). But (because it is useful in other
contexts) networkRemoveFirewallRules() will attempt to *unset* the
zone for each bridge interface, and when firewalld receives this
request, it sees that the bridge interface *has no zone* (because it
was unset by firewalld in step (2) above), and thus logs an error
message.
There is no way for libvirt to suppress an error message that is
logged by firewalld when a request to firewalld fails. But what
libvirt *can* do is realize that in these cases, the firewalld zone is
about to be set again anyway, and so we don't need to unset the zone.
This patch handles that by adding a bool unsetZone to the arguments of
networkRemoveFirewallRules(); most calls to networkRemoveFirewallRules()
have unsetZone=true, but in two cases where the zone is about to be
reset, networkRemoveFirewallRules() is called with unsetZone=false,
which prevents the call to virFirewallDInterfaceUnsetZone() and thus
avoids the unnecessary (and confusing to users!) error message that
would have been logged by firewalld.
Signed-off-by: Laine Stump <laine@redat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The most common "error" when trying to unset the firewalld zone of an
interface is for firewalld to tell us that the interface already isn't
in any zone. Since this is what we want, no need to alarm the user by
logging it as an error.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When a CPU model is reported as usable='no' an additional
<blockers model='...'> element is added for that CPU model to show which
features are missing for the CPU model to become usable.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When starting a domain we check whether the guest CPU definition is
compatible with the host (i.e., when the host supports all features
required both explicitly and by the specified CPU model) as long as
check == 'partial', which is the default.
We are doing so by checking our definition of the CPU model in the CPU
map amending it with explicitly mentioned features and comparing it to
features QEMU would enabled when started with -cpu host. But since our
CPU model definitions often slightly differ from QEMU we may be checking
features which are not actually needed and on the other hand not
checking something that is part of the CPU model in QEMU.
This patch changes the algorithm for CPU models added in the future
(changing it for existing models could cause them to suddenly become
incompatible with the host and domains using them would fail to start).
The new algorithm uses information we probe from QEMU about features
that block each model from being directly usable. If all those features
are explicitly disabled in the CPU definition we consider the base model
compatible with the host. Then we only need to check that all explicitly
required features are supported by QEMU on the host to get the result
for the whole CPU definition.
After this we only use the model definitions (for newly added models)
from CPU map for creating a CPU definition for host-model.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A function for accessing a list of features blocking CPU model
usability.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As opposed to the existing virCPUCompare{,XML} this function does not
use CPU model definitions from CPU map. It relies on CPU model usability
info from a hypervisor with a list of blockers that make the selected
CPU model unusable. Explicitly requested features are checked against
the hypervisor's view of a host CPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The new qemuDomainCheckCPU function is used as a replacement for
virCPUCompare to make sure all callers use the same comparison
algorithm. As a side effect qemuConnectCompareHypervisorCPU now properly
reports CPU compatibility for CPU model that are considered runnable by
QEMU even if our definition of the model disagrees.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function already parses CPU XML on s390. By parsing it consistently
on all architecture we can switch to virCPUCompare and easily replace it
with a QEMU specific helper in the following patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
