Historically we have used a bare xen:/// URI for connecting to the
legacy Xen driver. The new libxl Xen driver follows the new practice
of allowing '/system' as a path, as well as bare '/' for compat with
the old Xen driver.
This documents xen:///system as the preferred format for Xen, leaving
xen:/// as an undocumented feature just for back-compat.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
libvirt-guests.sh when run with more active guests than requested to
shut down in parallel will run until it times out only shutting down
the first set of guests.
This patch fixes parallel shutdown by fixing a variable scope issue
where check_guests_shutdown unintentionally reset $guests which
prevented further progress.
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1688508
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Instead of appearing as one long paragraph, split the output to list
each command option on its own line for better readability.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-path volume pool', or
'virsh vol-name volume pool', or 'virsh vol-key volume'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-info volume pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-dumpxml volume pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-wipe volume pool algorithm'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-download volume file pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-upload volume file pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-delete volume pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-clone source-vol target-vol pool'.
While making the modification clean up the description a bit too in
order to help clarify under what circumstances the source-vol could be
found if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Clean up the formatting to make the output a bit more readable at
least with respect to not having one paragraph of output. Each
option will start on its own line.
Signed-off-by: John Ferlan <jferlan@redhat.com>
We can use:
domifaddr f26-cloud --source arp
to get the address.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
This time around it's not enough to just pick the latest commit,
because with aed87bb2aa6ed83b49574eb982e3bdd4c36acf17 keycodemapdb
renamed the 'rfb' keycode to 'qnum' and we need to accept the new
name while maintaining backwards compatibility.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add the ability to provide the adapter parent_wwnn and parent_wwpn
or the parent_fabric_wwn on the virsh command line for the pool
define/create as commands. Update the virsh.pod description.
Signed-off-by: John Ferlan <jferlan@redhat.com>
One short sentence won't do it justice, but it could help by listing
scsi_hostN and vHBA to point one in the right direction.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The description was missing the wwnn and wwpn names for the
--adapter-wwnn and --adapter-wwpn switches. Just add it to be
clear that the fields cannot be empty (IOW they are not boolean).
Signed-off-by: John Ferlan <jferlan@redhat.com>
so it's not affected by flags that might be passed in $(*_LIBS) like
-L/usr/lib which might result in linking against system library and
requiring incorrect version of private symbols
Signed-off-by: Jan Palus <atler@pld-linux.org>
Currently if cmd->skipChecks is set (done only from completers)
some basic checks are skipped because we're working over
partially parsed command. See a26ff63ae4 for more detailed
explanation. Anyway, the referenced commit was too aggressive in
disabling checks and effectively returned success even in clear
case of failure. For instance:
# domif-getlink --interface <TAB><TAB>
causes virshDomainInterfaceCompleter() to be called, which calls
virshDomainGetXML() which eventually calls
vshCommandOptStringReq(.., name = "domain"); The --domain
argument is required for the command and if not present -1 should
be returned to tell the caller the argument was not found. Well,
zero is returned meaning the argument was not found but it's not
required either.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The commands which requires a pool to perform any action for a volume is
throwing a segfault when you pass the volume name before a pool name or
without the argument '--pool'.
An example that works:
virsh # vol-list loops-pool
Name Path
-------------------------------------------------------------------
loop0 /mnt/loop0
virsh # vol-info --pool loops-pool lo<TAB>
An example that does not work:
virsh # vol-list loops-pool
Name Path
-------------------------------------------------------------------
loop0 /mnt/loop0
virsh # vol-info lo<TAB>
Segmentation Fault
The example 'vol-info' can be executed as 'vol-info loop0 --pool
loops-pool'. So, this commit fixes this problem when the arguments are
inverted and avoids the segfault.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While libvirt-guests.sh is running cases can let guest_is_on fail which
causes check_guests_shutdown to print output.
That output shall not spill into the users of function
check_guests_shutdown which is therefore now returning values in a
variable like guest_is_on already did.
Original-Author: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Modified-By: Jorge Niedbalski <niedbalski@ubuntu.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Cast away enum type in places where we don't wish to cover all cases.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The variable names for the options and information about a command
should have an underscore in places where the virsh command has a
hyphen. The function callback name should capitalize the letter after
the hyphen. This was not used in 'blockcommit', 'blockcopy', 'blockjob',
'blockpull', and 'blockresize' commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Previously we've removed the data only in virshUpdateDiskXML when
changing the disk source for the CDROM since the backing store would be
invalid. Move the code into a separate function and callit from
virshFindDisk which is also used when detaching disk.
The detaching code does not necessarily need to get the full backing
chain since it will need to act on the one managed by libvirt anyways
and this also takes care of problems when parts of the backing store
were invalid due to buggy RBD detection code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Similarly to other commands add an argument which allows to check the
XML which would be used to execute the operation instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Undefined symbols are a bad thing in general because they can get
resolved in unexpected ways at runtime if multiple sources provide the
same symbol name. For example both glibc and libtirpc may provide XDR
symbols and we want to ensure that we resolve to libtirpc if that's what
we originally built against.
The toolchain maintainers thus strongly recommend that all applications
use the '-z defs' linker flag to prevent undefined symbols. This is
shortly becoming part of the default linker flags for RPMs. As an added
benefit this aligns Linux builds with Windows builds, where the linker
has never permitted undefined symbols.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently when the script validates the PKI files and
the certificate 'Subject:' field contains RDNs after
the Common Name (CN), these values are also included,
creating a false result that the CN is not correct.
A small change to the sed regex fixes this issue, by
extracting only the value for CN and nothing else. The
regex is replaced with the exact same regex used to
extract the CN value from the client certificate.
"ln" will not replace an existing symlink, so if you run 'make install'
twice, the second time will get an error:
ln: failed to create symbolic link 'virsh': File exists
We must always remove the symlink target first.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The bash-completion project documents that only those scripts
from $BASH_COMPLETIONS_DIR that share name with the current
command for which <TAB> was hit are loaded [1]. This means, that
vsh script we have there is not loaded. We have to create
symlinks for virsh and virt-admin.
At the same time, we have to create new RPM package because
virt-admin and client packages are independent. That means we
cannot place the vsh script in either of them. What we can do is
to have a different package that contains the completion script
and then virt-admin and client packages contain only the symlink
and require the bash-completion package.
1: https://github.com/scop/bash-completion#faq
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Only a small subset of VIR_CONNECT_LIST_DOMAINS_* flags are
actually used for this completer. Remove the unused ones. Note
that this is unrelated to other commands using
VIR_CONNECT_LIST_DOMAINS_* (i.e. cmdList) as this commit targets
the completer only and nothing else.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Unfortunately, we have a number of aliases in virsh and even though
these are not visible any more, we have to support them. The problem is
that when trying to print help for the alias, we get SIGSEGV because
there isn't any @def structure anymore and we need to query the command
being aliased instead.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1538570
Signed-off-by: Erik Skultety <eskultet@redhat.com>
These helpers are called from a single place only - cmdHelp wrapper and
just before the wrapper invokes the helpers, it performs the search,
either for command group or for the command itself, except the result is
discarded and the helper therefore needs to do it again. Drop this
inefficient handling and pass the @def structure rather than a name,
thus preventing the helper from needing to perform the search again.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This is a slight change from previous patches since virSecret
does not have a name only UUID strings.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The virConnectListAllNWFilters() has no extra flags yet, which
simplifies things a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Yet again, we don't need listing by device capabilities, so flags
are unused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This one is a bit simpler since virStoragePoolListAllVolumes()
has no flags yet.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The functions defined in these sources are referenced all over
the place, however, compiler only when building with readline.
Thus when building without it linker gets sad as it can't find
them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When building without readline, this function does nothing but
return false. Without touching any of its arguments which
triggers a build error. Therefore, provide a stub that has
arguments marked as unused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The current state of art is as follows:
1) vshReadlineOptionsGenerator() generate all possible --options
for given command, and then
2) vshReadlineOptionsPrune() clears out already provided ones
from the list.
Not only this brings needless memory complexity it is also not
trivial to get right. We can switch to easier approach: just
don't add already specified --options in the first step.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
For given domain fetch list of defined interfaces. This can be
used for commands like domif-getlink and others. If available,
the interface name is returned (e.g. "vnet0", usually available
only for running domains), if not the MAC address is returned.
Moreover, the detach-interface command requires only MAC address
and therefore we have new flag that forces the completer to
return just the MAC address.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have everything prepared let the fun begin. This
completer is very simple and returns domain names. Moreover,
depending on the command it can return just a subset of domains
(e.g. only running/paused/transient/.. ones).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The only purpose of this file is to be sourced. After that one
can use completion even for their bash:
# virsh list --<TAB><TAB>
--all --inactive ...
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This command is going to be called from bash completion script in
the following form:
virsh complete -- start --domain
Its only purpose is to return list of possible strings for
completion. Note that this is a 'hidden', unlisted command and
therefore there's no documentation to it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Similarly to the previous commit, once we've presented an
--option for a command to the user it makes no sense to offer it
again. Therefore, we can prune all already specified options. For
instance, after this patch:
virsh # migrate --verbose <TAB><TAB>
will no longer offer --verbose option.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of having completers prune returned string list based on
user's input we can do that right after the callback is called.
Only strings matching the prefix will be presented to the user
then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have everything prepared we can call options'
completer again. At the same time, pass partially parsed input to
the completer callback - it will help the callbacks to narrow
down the list of returned options based on user's input. For
instance, if the completer is supposed to return list of
interfaces depending on user input it may return just those
interfaces defined for already specified domain. Of course,
completers might ignore this parameter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the future, completer callbacks will receive partially parsed
command (and thus possibly incomplete). However, we still want
them to use command options fetching APIs we already have (e.g.
vshCommandOpt*()) and at the same time don't report any errors
(nor call any asserts).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It's better to fetch list of either commands or options just once
and then iterate over it. Moreover, it makes future completers
way simpler as they will return string lists too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When returning a string that needs escaping there are two
scenarios that can happen. Firstly, user already started the
string with a quote (or double quote) in which case we don't need
to do anything - readline takes care of that. However, if they
haven't typed anything yet, we need to escape the string
ourselves.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have a way of retrieving partly parsed command we
don't need duplicate code that parses the user's input.
Yes, this code removes call of opt's completer, but:
a) current implementation is broken anyway, and
b) it will be added back shortly
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the future, this function is going to be called from
vshReadlineParse() to provide parsed input for completer
callbacks. The idea is to allow the callbacks to provide more
specific data. For instance, for the following input:
virsh # domifaddr --domain fedora --interface <TAB><TAB>
the --interface completer callback is going to be called. Now, it
is more user friendly if the completer offers only those
interfaces found in 'fedora' domain. But in order to do that it
needs to be able to retrieve partially parsed result.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When parsing cmd line which has "--" on it, this is leaked.
Problem is, parser->getNextArg() allocates new string and stores
it into tkdata. But as soon as "--" is detected 'continue' is
issued without any free of the allocated memory.
==5304== 3 bytes in 1 blocks are definitely lost in loss record 1 of 782
==5304== at 0x4C2AF50: malloc (vg_replace_malloc.c:299)
==5304== by 0x8BB5AA9: strdup (strdup.c:42)
==5304== by 0x55842CA: virStrdup (virstring.c:941)
==5304== by 0x172B21: _vshStrdup (vsh.c:162)
==5304== by 0x175E8E: vshCommandArgvGetArg (vsh.c:1622)
==5304== by 0x17551D: vshCommandParse (vsh.c:1418)
==5304== by 0x175F25: vshCommandArgvParse (vsh.c:1638)
==5304== by 0x130940: virshParseArgv (virsh.c:820)
==5304== by 0x130C49: main (virsh.c:922)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The list_guests function in libvirt-guests uses 'grep -v' to filter
Xen domain0 from a list of guests. If domain0 is the only item in
the list, 'grep -v' returns 1, causing the 'stop' operation to fail
when action is 'suspend'. Improve the filtering by using sed to remove
domain0 from the list of guests.
This commit fixes the virsh prompt when reconnection to the same URI is
called: `virsh # connect --readonly` (Reconnect). The problem is
happening because the code is considering URI (name) as a mandatory
parameter to change the prompt. This commit remove the assignment into
`priv->readonly` from `if (name)` conditional.
Before:
virsh # uri
qemu:///system
virsh # connect --readonly
virsh #
After:
virsh # uri
qemu:///system
virsh # connect --readonly
virsh >
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1507737
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
My latest commit of a785186446 uncovered a problem we fixed
in 9eb23fe2 but then reverted in 834c5720e4. Turns out, some
systems (I'm looking at you OS X) have ancient readline with
broken header file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
According to the man page <interface-device> can be specified either by
name or MAC address, adjust the command's help accordingly.
Signed-off-by:ZhiPeng Lu <lu.zhipeng@zte.com.cn>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Because WARN_CFLAGS and COVERAGE_CFLAGS are not set globally, we
rely on each binary built to include WARN_CFLAGS/COVERAGE_CFLAGS.
But it is easy to forget those - e.g. libvirt_shell.la. However,
don't enable WARN_FLAGS (i.e. don't include AM_CFLAGS) for
wireshark plugin - parts of that code are generated and trigger
some warnings.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
There are couple of limitations when it comes to option types and
flags for the options. For instance, VSH_OT_STRING cannot have
VSH_OFLAG_REQ set (commit c7543a728). For some reason this is
checked in vshCmddefHelp() but not in vshCmddefCheckInternals().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
It is literally only a wrapper around virBitmapNewData() and
virBitmapFormat(), only the naming was wrong since it was introduced.
And because we have virBitmap*String functions where the meaning of
the 'String' is constant, this might confuse someone.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since update to glibc-2.26 removed the /usr/include/rpc/rpc.h we used until now,
it showed us a problem with not using XDR_CFLAGS properly. On linux that
variable has usually -I/usr/include/tirpc because we already probe for it
properly, we just don't use it everywhere we need. It is needed by wireshark
dissector as well as testutilsqemu.c (through includes) so the build fails with:
wireshark/src/packet-libvirt.c:33:10: fatal error: rpc/xdr.h: No such file or directory
#include <rpc/xdr.h>
^~~~~~~~~~~
and
In file included from ../src/logging/log_manager.h:29:0,
from ../src/qemu/qemu_domain.h:40,
from testutilsqemu.c:11:
../src/logging/log_protocol.h:9:10: fatal error: rpc/rpc.h: No such file or directory
#include <rpc/rpc.h>
^~~~~~~~~~~
Since lot of tests use testutilsqemu.c it is easier to add XDR_CFLAGS to
AM_CFLAGS than adding it to all $binary_CFLAGS. It's just for tests and we
already have bunch of CFLAGS there anyway.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The 'set-lifcycle-action' is throwing a weird error after executing it with
the '--help' option. The command output is showing the options 'type' and
'action' are as optional, but they aren't. Both are required.
virsh # set-lifecycle-action --help
...
SYNOPSIS
set-lifecycle-action <domain> [--type <string>] [--action <string>] ...
...
OPTIONS
[--domain] <string> domain name, id or uuid
error: internal error: bad options in command: 'set-lifecycle-action'
After applying this patch, both arguments are required now.
virsh # set-lifecycle-action --help
...
SYNOPSIS
set-lifecycle-action <domain> <type> <action> [--config] ...
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1509870
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
In some cases there's dangling backward slash at the end of multi
line macros. While technically the code works, it will stop if
some empty lines are removed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Commit fdeac7a05f tried to fix the output
of 'virsh domxml-to-native --help' by switching types around. One of the
changes broke the option parser. VSH_OT_ARGV should be used only for
variable argument count, not to make the help generator look pretty.
The correct option type in this case is VSH_OT_STRING as it's not
mandatory now since it can be substituted by using --domain.
This makes --help for this command look incorrect, but the parser works
as it should.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1494400
Option --full will always display the name and MAC address of the
the interface. Both virsh help and virsh man page didn't mention that.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
The command tries to match interface in domain definition by MAC
address or interface name. However, since it's possible to
configure two interfaces with the same MAC address, it may
happen that the XPath returns two or more nodes. We should check
for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1497396
The other APIs accept both, ifname and MAC address. There's no
reason virDomainInterfaceStats can't do the same.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1497396
The current implementation reads the stats from the host.
However, this doesn't work for all types of interfaces as not all
of them have a representation in the host. For instance,
interface type='user' doesn't.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The command "info migrate" of qemu outputs the dirty-pages-rate during
migration, but page size is different in different architectures. So
page size should be output to calculate dirty pages in bytes.
Page size is already implemented with commit
030ce1f8612215fcbe9d353dfeaeb2937f8e3f94 in qemu.
Now Implement the counter-part in libvirt.
Signed-off-by: Chao Fan <fanc.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1476775
For the virsh pool-{define|create}-as command, let's allow using
--secret-uuid on the command line as an alternative to --secret-usage
(added for commit id '8932580'), but ensure that they are mutually
exclusive.
In my previous commit of b1d87f9ad9 I've made a typo breaking
the FreeBSD build. s/ipAaddr/ipAddr/
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This commit adds new events for two methods and operations: *PoolBuild() and
*PoolDelete(). Using the event-test and the commands set below we have the
following outputs:
$ sudo ./event-test
Registering event callbacks
myStoragePoolEventCallback EVENT: Storage pool test Defined 0
myStoragePoolEventCallback EVENT: Storage pool test Created 0
myStoragePoolEventCallback EVENT: Storage pool test Started 0
myStoragePoolEventCallback EVENT: Storage pool test Stopped 0
myStoragePoolEventCallback EVENT: Storage pool test Deleted 0
myStoragePoolEventCallback EVENT: Storage pool test Undefined 0
Another terminal:
$ sudo virsh pool-define test.xml
Pool test defined from test.xml
$ sudo virsh pool-build test
Pool test built
$ sudo virsh pool-start test
Pool test started
$ sudo virsh pool-destroy test
Pool test destroyed
$ sudo virsh pool-delete test
Pool test deleted
$ sudo virsh pool-undefine test
Pool test has been undefined
This commits can be a solution for RHBZ #1475227.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1475227
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So we refer to the terms 'persistent' and 'transient' across the whole
man page, without describing it further, but more importantly, how the
create command affects it, i.e. explicitly stating that domain created
via the 'create' command are going to be transient or persistent,
depending on whether there is an existing persistent domain with a
matching <name> and <uuid>, in which case it will remain persistent, but
will run using a one-time configuration, otherwise it's going to be
transient and will vanish once destroyed.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The documentation mistakenly states that the unit for returned
values is kB (multiple of 1000), while in fact we are returning
KiB (multiple of 1024).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Requesting an automated switch to a post-copy migration (using
--timeout-postcopy) without actually enabling post-copy migration (using
--postcopy) doesn't really do anything. Let's make this dependency
explicit to avoid unexpected behavior.
https://bugzilla.redhat.com/show_bug.cgi?id=1455023
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Fix the warning generated on PPC by virt-host-validate for IOMMU.
In case of PPC, IOMMU in the host kernel either has it or it's not
compiled in. The /sys/kernel/iommu_groups check is good enough to
verify if it was compiled with the kernel or not.
Modify the error message when "if (sb.st_nlink <= 2)" to indicate
what the problem would be since there would be no @bootarg.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
It was not entirely clear that PARALLEL_SHUTDOWN setting is applied only
when the desired action is "shutdown".
Signed-off-by: Lily Zhu <lizhu@redhat.com>
A variable named 'socket' clashes with the function of the same
name, causing build failures due to warnings on some platforms.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This commit adds the unix socket URL support to 'domdisplay' command.
Before, even if an user was using unix socket to define a spice graphics,
the command 'domdisplay' showed that the settings were not supported. Now,
the command shows the proper URL: spice+unix://foo/bar.sock.
Settings:
<graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1'>
<listen type='address' address='127.0.0.1'/>
</graphics>
<graphics type='spice'>
<listen type='socket' socket='/tmp/spice.sock'/>
</graphics>
Before:
virsh # domdisplay --all Windows7
vnc://127.0.0.1:0
After:
virsh # domdisplay --all Windows7
vnc://127.0.0.1:0
spice+unix:///tmp/spice.sock
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1336720
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Driver modules proved to be reliable for a long time. Since support for
not building modules complicates the code and makefiles drop it.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
In Wireshark commit of 7cd6906056922e4b8 (contained in v2.4.0)
the tvb_new_subset() function was renamed to
tvb_new_subset_length_caplen(). However, we can take the extra
step and rename to tvb_new_subset_remaining() directly (see
Wireshark commit 0ecfc7280cf3d7). The reasoning is that there is
no other protocol in the packet than libvirt. Therefore, from the
point that libvirt dissector takes over till the end of the
packet it's all libvirt packet.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
While looking to implement a migrate-getmaxdowntime command (coming),
I noticed that the setmaxdowntime is incorrectly looking at its
parameter as a signed longlong. Not sure how that got past gcc, but
here's a simple patch to make the command line parsing and the parameter to
the worker functions all have the correct (unsigned) type.
Signed-off-by: Scott Garfinkle <seg@us.ibm.com>
The command 'domdisplay' is not freeing the domain pointer properly in
cleanup section. See the error below:
virsh # domdisplay WINDOWS7
vnc://127.0.0.1:0
virsh # quit
error: One or more references were leaked after disconnect from the hypervisor
Valgrind report:
==29168== 66 (56 direct, 10 indirect) bytes in 1 blocks are definitely lost in loss record 154 of 239
==29168== at 0x4C2FB55: calloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==29168== by 0x5505324: virAllocVar (viralloc.c:560)
==29168== by 0x555A61B: virObjectNew (virobject.c:199)
==29168== by 0x561F367: virGetDomain (datatypes.c:284)
==29168== by 0x5680979: get_nonnull_domain (remote_driver.c:8143)
==29168== by 0x5680979: remoteDomainLookupByName (remote_client_bodies.h:3047)
==29168== by 0x5623D9A: virDomainLookupByName (libvirt-domain.c:425)
==29168== by 0x160480: virshLookupDomainInternal (virsh-util.c:59)
==29168== by 0x160547: virshCommandOptDomainBy (virsh-util.c:98)
==29168== by 0x13D3A9: cmdDomDisplay (virsh-domain.c:10963)
==29168== by 0x165680: vshCommandRun (vsh.c:1327)
==29168== by 0x12E320: main (virsh.c:953)
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Resolves a bug in domxml-to-native command option, so that the
following command displays the help information correctly:
'virsh domxml-to-native --help'.
Signed-off-by: Daniel Liu <srwx4096@gmail.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
The option allows someone to run domain-to-native on already existing
domain without the need of supplying their XML. It is basically
wrapper around 'virsh dumpxml | virsh domxml-to-native /dev/stdin'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=835476
Signed-off-by: Daniel Liu <srwx4096@gmail.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use ATTRIBUTE_FALLTHROUGH, introduced by commit
5d84f5961b, instead of comments to
indicate that the fall through is an intentional behavior.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
When building with clang 4.0.0, virsh build fails like this:
gmake[3]: Entering directory '/usr/home/novel/code/libvirt/tools'
CC virsh-virsh.o
In file included from virsh.c:45:
In file included from /usr/local/include/readline/readline.h:31:
/usr/local/include/readline/rltypedefs.h:35:22: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
typedef int Function () __attribute__ ((deprecated));
^
void
/usr/local/include/readline/rltypedefs.h:36:24: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
typedef void VFunction () __attribute__ ((deprecated));
^
void
/usr/local/include/readline/rltypedefs.h:37:26: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
typedef char *CPFunction () __attribute__ ((deprecated));
^
void
/usr/local/include/readline/rltypedefs.h:38:28: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
typedef char **CPPFunction () __attribute__ ((deprecated));
^
void
In file included from virsh.c:45:
/usr/local/include/readline/readline.h:385:23: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
extern int rl_message ();
^
void
5 errors generated.
gmake[3]: *** [Makefile:2823: virsh-virsh.o] Error 1
Fix that by adding -D_FUNCTION_DEF to READLINE_CFLAGS to fix *Function
related warnings and add a check for stdarg.h so we have HAVE_STDARG_H
defined that's needed by the readline headers to use proper rl_message
declaration.
Bug report on the readline mailing list:
http://lists.gnu.org/archive/html/bug-readline/2017-05/msg00004.html
Commit 24d4a0a1f removed the non-existent "dying" state from the list
of possible domain states given in the virsh manpage, but didn't
correct the count of states from 8 down to 7. This patch fixes that
mismatch by completely removing any reference to the exact number of
states (thus preventing a potential future mismatch), while wording
the sentence in a more readable/truthful manner.
Now that the node_device driver is aware of CCW devices, let's hook up
virsh so that we can filter them properly.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Make CCW devices available to the node_device driver. The devices are
already seen by udev so let's implement necessary code for detecting
them properly.
Topologically, CCW devices are similar to PCI devices, e.g.:
+- ccw_0_0_1a2b
|
+- scsi_host0
|
+- scsi_target0_0_0
|
+- scsi_0_0_0_0
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
QEMU will likely report the details of it shutting down, particularly
whether the shutdown was initiated by the guest or host. We should
forward that information along, at least for shutdown events. Reset
has that as well, however that is not a lifecycle event and would add
extra constants that might not be used. It can be added later on.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1384007
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1374126
Due to how the processing for authentication using polkit works, the
virshConnect code must first "attempt" an virConnectOpenAuth and then
check for a "special" return error code VIR_ERR_AUTH_UNAVAILABLE in
order to attempt to "retry" the authentication after performing a creation
of a pkttyagent to handle the challenge/response for the client.
However, if pkttyagent creation is not possible for the authentication
being attempted (such as perhaps a "qemu+ssh://someuser@localhost/system"),
then the same failure pattern would be returned and another attempt to
create a pkttyagent would be done. This would continue "forever" until
someone forced quit (e.g. ctrl-c) from virsh as the 'authfail' was not
incremented when creating the pkttyagent.
So add a 'agentCreated' boolean to track if we've attempted to create the
agent at least once and force a failure if that creation returned the same
error pattern.
This resolves a possible never ending loop and will generate an error:
error: failed to connect to the hypervisor
error: authentication unavailable: no polkit agent available to authenticate action 'org.libvirt.unix.manage'
NB: If the authentication was for a sufficiently privileged client, such as
qemu+ssh://root@localhost/system, then the remoteDispatchAuthList "allows"
the authentication to use libvirt since @callerUid would be 0.
The reason for introducing two capabilities, one for the device itself
(cap 'mdev') and one for the parent device listing the available types
('mdev_types'), is that we should be able to do
'virsh nodedev-list --cap' not only for existing mdev devices but also
for devices that support creation of mdev devices, since one day libvirt
might be actually able to create the mdev devices in an automated way
(just like we do for NPIV/vHBA).
https://bugzilla.redhat.com/show_bug.cgi?id=1452072
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Similarly to previous commit, implement sparse streams feature
for vol-upload. This is, however, slightly different approach,
because we must implement a function that will tell us whether
we are in a data section or in a hole. But there's no magic
hidden in here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add a new --sparse switch that does nothing more than
enables the sparse streams feature for this command. Among with
the switch new helper function is introduced: virshStreamSkip().
This is the callback that is called whenever daemon sends us a
hole. In the callback we reflect the hole in underlying file by
seeking as many bytes as told.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Ideally, this would be generated, but to achieve that
corresponding XDR definitions needed to go into a different .x
file. But they belong just to the one that they are right now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virt-install and virt-manager both default to explicitly setting
"io='native'" in the disk "driver" tag. virsh, however, does not and also
does not provide an option to specify that setting at all. As a result,
disks use a different IO mechanism (the default, "threads") when attached
post-setup using virsh. Adding this option allows users to keep disk
performance consistent for disks attached at install, and those attached
afterward.
https://bugzilla.redhat.com/show_bug.cgi?id=1330940
The virsh command 'domblkinfo' returns the capacity, allocation and phisycal
size of the devices attached in a domain. Usually, this sizes are very big
and hard to understand and calculate. This commits introduce a human readable
support to check the size of each field easilly.
For example, the command before:
virsh # domblkinfo my_domain hda
Capacity: 21474836480
Allocation: 14875545600
Physical: 21474836480
and after this patch:
virsh # domblkinfo my_domain hda --human
Capacity: 20.000G
Allocation: 13.900G
Physical: 20.000G
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The parameter is reported by virDomainGetJobStats API and
VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event and it can be used to identify
the operation (migration, snapshot, ...) to which the reported
statistics belong.
https://bugzilla.redhat.com/show_bug.cgi?id=1441563
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
There are several functions in virshInit which can fail, especially
when running win32 builds under WINE. Currently virsh just exits
without reporting what error happened.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In virsh we quite often get the domain XML just to initialize the XPath
parser so that we can extract information.
Add helpers which will simplify this by wrapping the getting of the XML
and parsing it along with error reporting.
Additionally a second helper also gets the domain object from the
parameters and releases it so that functions which need the XML as only
source of data can be simplified further.
Avoid the annoying issue where the public object freeing APIs overwrite
the error set by helper functions, since they don't invoke the callback.
The new helper remembers the error only if no previous error was set.
virDomainFree has it's quirks (does not like NULL pointers, resets
libvirt errors). Replace it by a virsh helper which will allow us to
centrally fix issues with it.
The syntax-check rule will prohibit new uses of virDomainFree.
Move virshLookupDomainBy, virshCommandOptDomainBy and
virshCommandOptDomainBy to the helper file. Additionally turn the
virshCommandOptDomainBy macro into a function.
==18591== 16 bytes in 1 blocks are definitely lost in loss record 41 of 183
==18591== at 0x4C2B934: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==18591== by 0x54EBB1C: virAllocN (viralloc.c:191)
==18591== by 0x1628CA: _vshMalloc (vsh.c:136)
==18591== by 0x1344C4: virshVcpuPinQuery (virsh-domain.c:6603)
==18591== by 0x1344C4: cmdVcpuPin (virsh-domain.c:6707)
==18591== by 0x1631BF: vshCommandRun (vsh.c:1312)
==18591== by 0x12DBB1: main (virsh.c:961)
Introduce STRICT_FRAME_LIMIT_CFLAGS that will be used for
production code and RELAXED_FRAME_LIMIT_CFLAGS for tests.
Raising the limit for tests allows building them with clang
with optimizations disabled.
qemu requires that the topology equals to the maximum vcpu count.
Document this along with the API to set maximum vcpu count and the XML
element.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1426220
https://bugzilla.redhat.com/show_bug.cgi?id=1398087
Clean up the virsh man page description for --pool-create-as in order
to better describe how the various arguments are used when creating
(or defining) a logical pool.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1398087
Clean up the virsh man page description for --pool-create-as in order
to better describe how the various arguments are used when creating
(or defining) a logical pool.
Also modify the storage pool XML parsing algorithm to check for the
mismatched "name" and "source-name".
Move the --print-xml to the end of the qualifiers since it's not
properly positionally situated for both --pool-create-as and --pool-define-as
and could be miscontrued as being the 3rd positional argument.
Management tools may want to check whether the threshold is still set if
they missed an event. Add the data to the bulk stats API where they can
also query the current backing size at the same time.
When using thin provisioning, management tools need to resize the disk
in certain cases. To avoid having them to poll disk usage introduce an
event which will be fired when a given offset of the storage is written
by the hypervisor. Together with the API which will be added later, it
will allow registering thresholds for given storage backing volumes and
this event will then notify management if the threshold is exceeded.
Add bhyve support to virt-host-validate(1). It checks for the
essential kernel modules to be available so that user can actually
start VMs, have networking and console access.
It uses the kldnext(2)/kldstat(2) routines to retrieve modules list.
As bhyve is only available on FreeBSD and these routines were available
long before bhyve appeared, not adding any specific configure checks
for that.
Also, update tools/Makefile.am to add
virt-host-validate-$driver.[hc] to the build only if the
appropriate driver is enabled.
In GCC 7 there is a new warning triggered when a switch
case has a conditional statement (eg if ... else...) and
some of the code paths fallthrough to the next switch
statement. e.g.
conf/domain_conf.c: In function 'virDomainChrEquals':
conf/domain_conf.c:14926:12: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (src->targetTypeAttr != tgt->targetTypeAttr)
^
conf/domain_conf.c:14928:5: note: here
case VIR_DOMAIN_CHR_DEVICE_TYPE_CONSOLE:
^~~~
conf/domain_conf.c: In function 'virDomainChrDefFormat':
conf/domain_conf.c:22143:12: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (def->targetTypeAttr) {
^
conf/domain_conf.c:22151:5: note: here
default:
^~~~~~~
GCC introduced a __attribute__((fallthrough)) to let you
indicate that this is intentionale behaviour rather than
a bug.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Alter the formatting of each line to not give the appearance of
one long run-on sentence and to be consistent between the various
elements of collected/displayed data. The formatting should fit
within the 80 character display. This removes the need for commas
at the end of each line.
After 7f1bdec5fa our nodedev driver is capable of
determining DRM devices (DRM stands for Direct Render Manager not
Digital rights management). There is still one bit missing
though: virConnectListAllNodeDevices() is capable of listing
either all devices or just those with specified capability. Well,
DRM capability is missing there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
All options started with underscores, but we switched them to dashes
later on, making the style consistent. The latest addition, however,
did not respect that, so let's change that as well. It is tempting to
just change the name instead of adding alias, especially since nobody
ever used it, which we know thanks to the fact that it didn't work.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Function vshCommandOptStringReq() returns -1 on error and 0 on
success. The code, however, used the 'group_name' variable only if it
returned 1 (never).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
As LIBVIRT_DEBUG=4 logs only error messages and there
are no levels above it, adjusting the description in
the man page accordingly.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
This commit is similar to commit 0977ada8.The virsh manpage
lists options --uuid and --name as mutually exclusive if
option --details is specified when actually the option
--details is mutually exclusive and can't go with options
--uuid and/or --name. This patch rewords the virsh manpage
to state the correct meaning.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
Added general definitions for vstorage pool backend including
the build options to add --with-storage-vstorage checking.
In order to use vstorage as a backend for a storage pool
vstorage tools (vstorage and vstorage-mount) need to be installed.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
The recent deprecation in glibc (commit b76e065991ec) means the
module will fail to build entirely:
nss/libvirt_nss.c: In function '_nss_libvirt_gethostbyname_r':
nss/libvirt_nss.c:363:13: error: RES_USE_INET6 is deprecated [-Werror]
int af = ((_res.options & RES_USE_INET6) ? AF_INET6 : AF_INET);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This resolver option was removed shortly after being introduced,
and application using it are already broken anyway.
This patch will allow --uuid and --name in one cmd.
The pool's UUID and name will be printed side by side.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
By default, pool-info will convert sizes to human friendly units.
This patch will introduce option [--bytes].
If specified, the raw sizes will be in the output.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1373711
Add support and documentation for the [NO_]OVERWRITE flags for the
logical backend.
Update virsh.pod with a description of the process for usage of
the flags and building of the pool's volume group.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than have the Disk code having to use PARTED to determine if
there's something on the device, let's use the virStorageBackendDeviceProbe.
and only fallback to the PARTED probing if the BLKID code isn't built in.
This will also provide a mechanism for the other current caller (File
System Backend) to utilize a PARTED parsing algorithm in the event that
BLKID isn't built in to at least see if *something* exists on the disk
before blindly trying to use. The PARTED error checking will not find
file system types, but if there is a partition table set on the device,
it will at least cause a failure.
Move virStorageBackendDiskValidLabel and virStorageBackendDiskFindLabel
to storage_backend and rename/rework the code to fit the new model.
Update the virsh.pod description to provide a more generic description
of the process since we could now use either blkid or parted to find
data on the target device.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1363586
Commit id '27758859' introduced the "NO_OVERWRITE" flag check for
file system backends; however, the implementation, documentation,
and algorithm was inconsistent. For the "flag" description for the
API the flag was described as "Do not overwrite existing pool";
however, within the storage backend code the flag is described
as "it probes to determine if filesystem already exists on the
target device, renurning an error if exists".
The code itself was implemented using the paradigm to set up the
superblock probe by creating a filter that would cause the code
to only search for the provided format type. If that type wasn't
found, then the algorithm would return success allowing the caller
to format the device. If the format type already existed on the
device, then the code would fail indicating that the a filesystem
of the same type existed on the device.
The result is that if someone had a file system of one type on the
device, it was possible to overwrite it if a different format type
was specified in updated XML effectively trashing whatever was on
the device already.
This patch alters what NO_OVERWRITE does for a file system backend
to be more realistic and consistent with what should be expected when
the caller requests to not overwrite the data on the disk.
Rather than filter results based on the expected format type, the
code will allow success/failure be determined solely on whether the
blkid_do_probe calls finds some known format on the device. This
adjustment also allows removal of the virStoragePoolProbeResult
enum that was under utilized.
If it does find a formatted file system different errors will be
generated indicating a file system of a specific type already exists
or a file system of some other type already exists.
In the original virsh support commit id 'ddcd5674', the description
for '--no-overwrite' within the 'pool-build' command help output
has an ambiguous "of this type" included in the short description.
Compared to the longer description within the "Build a given pool."
section of the virsh.pod file it's more apparent that the meaning
of this flag would cause failure if a probe of the target already
has a filesystem.
So this patch also modifies the short description to just be the
antecedent of the 'overwrite' flag, which matches the API description.
This patch also modifies the grammar in virsh.pod for no-overwrite
as well as reworking the paragraph formats to make it easier to read.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The virsh manpage lists "shutdown" and "dying" as two of the possible
domain states that could be listed in the output of the "virsh list"
command. However, a domain that is being shutdown will be listed as
"in shutdown", and the "dying" state doesn't even exist (and never
has, as far as I can tell from looking through git history - it was
shown in the original import of the virsh.pod file in 2006; there was
no VIR_DOMAIN_DYING state then, there wasn't one when those lines of
virsh.pod were tweaked in 2008, and there still isn't one
today. Apparently it was just something that sounded like a good idea
to someone at some time, but was never implemented...)
Resolves: https://bugzilla.redhat.com/1408778
This patch adds support and documentation for
a generalized hardware cache event called cache_l1d
perf event.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
The virsh manpage lists options --uuid and --name as
mutually exclusive along option --table when actually
the option --table is mutually exclusive and can't go
with options --uuid and/or --name. This patch rewords the
virsh manpage to state the correct meaning.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
When setting perf events, the enabled/disabled perf events are not
listed. Since we know which events were changed it's possible to
print out the values on successful set, such as :
virsh perf Domain --enable instructions --disable cache_misses
instructions : enabled
cache_misses : disabled
Created a helper to print the messages - use the vshPrintExtra to
adhere to the --quiet|-q option being set by some script. This will
cause the get code to print nothing, but will return success/failure.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
When changing the metadata via virDomainSetMetadata, we now
emit an event to notify the app of changes. This is useful
when co-ordinating different applications read/write of
custom metadata.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new qualifier '--physical' to the 'vol-info' command in order to
dispaly the physical size of the volume. The size can differ from the
allocation value depending on the volume file time. In particular, qcow2
volumes will have a physical value larger than allocation. This also occurs
for sparse files, although for those the capacity is the largest size;
whereas, for qcow2 capacity is the logical size.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Finally, now that all APIs have been introduced, wire them up to virt-admin
and introduce daemon-log-outputs and daemon-log-filters commands.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
1ec22be5 added code that detects the maximum cpu count according to
domain capabilities. The code fell back to the old command only if the
API was not supported. If the API fails for other reasons the command
would fail. There's no point in not trying the old API in such case.
https://bugzilla.redhat.com/show_bug.cgi?id=1402690
Some arguments in vshErrorHandler, vshReadlineCompletion and
cmdSelfTest functions are not used. Mark them as such.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If the 'nleases < 0' on return, then the subsequent call to
findLeaseInJSON will not produce the expected results (passed
in as a size_t, but nleases is a ssize_t). So check if the
returned value < 0 and if so, goto cleanup.
Found by Coverity as a NEGATIVE_RETURNS event
With current perf framework, this patch adds support and documentation
for the branch_instructions perf event.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
So far the NSS module looks up only hostnames as provided by
guests themselves. However, there are some cases where this is
not enough: e.g. when there's a fresh new guest being installed
(with some generic hostname) say from a live ISO image; or some
(older) systems don't advertise their hostname in DHCP
transactions at all.
In cases like that it would be helpful if we translate domain
name as seen by libvirt too so that users can:
# virsh start $dom && ssh $dom
In order to achieve that new libvirt-guest module is introduced,
while older libvirt module maintains its current behaviour (that
is translating guest provided names into IP addresses).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The part of the code that iterates over an array of JSON values
is going to be re-used. Instead of copying it over, move it to a
separate function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The part of the code that appends found IP address into a list is
going to be re-used. Instead of copying it over, move it to a
separate function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The name of the exported functions for an NSS module is quite
fixed, it is derived from the module name:
_nss_$module_$function
Since we will create another NSS module with very similar
implementation we might as well generate the function names at
the compile time.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have couple of functions that operate over NULL terminated
lits of strings. However, our naming sucks:
virStringJoin
virStringFreeList
virStringFreeListCount
virStringArrayHasString
virStringGetFirstWithPrefix
We can do better:
virStringListJoin
virStringListFree
virStringListFreeCount
virStringListHasString
virStringListGetFirstWithPrefix
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It is already discussed in "[RFC] daemon: remove hardcode dep on libvirt-guests" [1].
Mgmt can use means to save/restore domains on system shutdown/boot other than
libvirt-guests.service. Thus we need to specify appropriate ordering dependency between
libvirtd, domains and save/restore service. This patch takes approach suggested
in RFC and introduces a systemd target, so that ordering can be built next way:
libvirtd -> domain -> virt-guest-shutdown.target -> save-restore.service.
This way domains are decoupled from specific shutdown service via intermediate
target.
[1] https://www.redhat.com/archives/libvir-list/2016-September/msg01353.html
Commit v1.3.3-181-gb028e9d7c implmented support for
VIR_MIGRATE_PARAM_PERSIST_XML migration parameter, but forgot to update
virsh.
https://bugzilla.redhat.com/show_bug.cgi?id=835300
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Although there already was an effort (b620bdee) to replace vshPrint occurrences
with vshPrintExtra due to '--quiet' flag, there were still some leftovers. So
this patch fixes them, hopefully for good.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1356881
Signed-off-by: Erik Skultety <eskultet@redhat.com>
There were a few places in our virsh* code where instead of calling vshError
on failure we called vshPrint.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
First, since commit 834c5720 the error reporting within the vshErrorHandler
doesn't work because there was a lot of renaming going on (dull mechanical
renaming without much thinking about it, yep - shame on me) and so the original
env variable VIRSH_DEBUG got renamed to VSH_DEBUG which we don't support nor
document anywhere. Second, by specifying this env variable, the last libvirt
error gets reported twice despite the fact we say the error reporting should be
deferred until the command finishes, and last but not least the vintage code's
logic is a bit 'odd', since the error would get reported iff the env variable
is set, even if the value should be equal to our DEFAULT value in which case it
doesn't make sense that we behave differently when an env variable is set to
some value and when there's no env variable at all but we use the same value
automatically as default.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Unlike the other error messages in vshInitDebug, this one relied on a hardcoded
name of a variable instead of using the prefix of the tool calling the init
routine.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1393854
Signed-off-by: Erik Skultety <eskultet@redhat.com>
After 06a7b1ff4 the @&opts_need_arg is not used anywhere. Well,
it is set but never read:
vsh.c: In function 'vshReadlineParse':
vsh.c:2658:14: warning: variable 'opts_need_arg' set but not used [-Wunused-but-set-variable]
uint64_t opts_need_arg, opts_seen;
^~~~~~~~~~~~~
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit id 'dcfdf341' passes 'opts_need_arg' and 'opts_seen' to
vshCmddefGetData, but that seems to be incorrect as those values
are not initialized properly (something at least one compiler found).
Instead the static 'const_opts_need_arg' and 'const_opts_seen' values
should be passed.
By passing unitialized values leads to not finding possible options
for simpler commands (domfsfreeze for example), where if you're in
a virsh shell using command line completion - you'll get a list of
files in your current directory instead of two options --domain and
--mountpoint (as would happen with this patch applied.
Correcting the error reporting method by using VSH_REQUIRE_OPTION
instead of virReportError
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
The 'on_shutdown' was the name in Xen, there was never such option in
libvirt's domain XML.
Reported-by: Ruben Kerkhof <ruben@rubenkerkhof.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since we're using autoconf to substitute the right value in
Makefile.am now, we can use a less generic name without running
into circular dependencies.
Adding $(prefix) in Makefile.am, as we were doing, means that
it would be prepended even when using --with-ws-plugindir,
which is something we don't want to happen.
Instead, we add it beforehand but take care that it doesn't
get expanded until make is called.
https://bugzilla.redhat.com/show_bug.cgi?id=1349898
Add the duration parameters to the virsh input/output for blkdeviotune
command and describe them in the pod file.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rework the repetitive lines to add iotune values into easier to read macros.
One to handle the SCALED values and one to handle the non scaled values.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Added description for new vcpu.<num>.halted statistics value.
While there, also added a description for vcpu.<num>.wait and
clarified the units displayed for time and wait.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
It is stated in the manual already, so let's mention the same thing in
the description to avoid causing problems.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If the VM is offline virsh attempted to at least report the pinning
information for the VM. This would not work properly now that the vcpus
can be sparse. Fix it by getting the vcpu states from the XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1375920
The fallback code used if virDomainGetVcpusFlags is not supported used
wrong XPath queries and basically did not work at all. Fix them to point
to the <domain> <vcpu> element instead of <vcpus> which was not present
until lately.
The Requires relationship is very strong, in that it prevents
a unit from running unless all the units it Requires are
running as well.
This turns out to be a problem because we want to be able to
restart libvirtd at any time without having libvirt-guests
suspend or shutdown running guests.
Turn the Requires relationship into a Wants relationship:
this way starting libvirt-guests will cause systemd to (attempt
to) start libvirtd as well, but stopping or restarting libvirtd
will not alter libvirt-guests' running state.
1. Move the declaration of const vshCmdDef *help - it should be at the
top of the "if" rather than in the middle.
2. Change a comparison from && to || - without doing so we could crash
on commands like 'virsh list' which would allow completion of some
non -- option based on whatever was found in the current working
directory and then as soon as that was completed, the next <tab>
would crash since "opt" would be returned as NULL, but the check
was dereferencing "&& opt->type"
3. Before dereferencing opt->completer, be sure opt isn't NULL.
With newer versions of libvirt Domain-0 is again visible in the list of
running guests but it should not be considered as a guest for shutdown
or suspend.
Signed-off-by Stefan Bader <stefan.bader@canonical.com>
The list file expects all guest UUIDs on the same line as the URI
which the guests run on. This does not happen when the list is
echo'ed in quotes. When stripping the quotes, newlines get transformed
into spaces. Without this, only the first guest on the list is actually
handled.
Based on a fix by Omar Siam <simar@gmx.net>
Bug-Ubuntu: http://bugs.launchpad.net/bugs/1591695
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
For one VM, it could had more than one graphical display.
Such as we coud add both vnc and spice display to a VM.
This patch introduces '--all' for showing all
possible graphical display of a active VM.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
GCC complained that
vsh.c: In function 'vshReadlineOptionsGenerator':
vsh.c:2622:29: warning: unused variable 'opt' [-Wunused-variable]
const vshCmdOptDef *opt = &cmd->opts[list_index];
^
vsh.c: In function 'vshReadlineParse':
vsh.c:2830:44: warning: 'opt' may be used uninitialized in this function
[-Wmaybe-uninitialized]
completed_list = opt->completer(autoCompleteOpaque,
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
For compatibility reasons virDomainSetVcpus needs to add vcpus as non
hotpluggable which means that the users will not be able to unplug it
after the VM has started. Add a flag that will allow to tell the API
that the unpluggable vcpus are okay.
The NSS module shouldn't rely on custom leases database to not have
entries for leases which have expired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
