This function validates whether parsed limits are within range as
defined by 'tc' sources (since we use tc to set QoS; or OVS which
then uses tc too). The 'tc' program stores speeds in 64bit
integers (unit is bytes per second) and sizes in uints (unit is
bytes). We use different units: kilobytes per second and
kibibytes and therefore we can parse values larger than 'tc' can
handle and thus need a function to check if values still fit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Instead of having many if-else statements, each with its own
vshTableRowAppend() call, we can use a simple trick - have an
array of string pointers, set array members in the if bodies and
then call vshTableRowAppend() once.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All calls to vshTableRowAppend() inside of cmdList() share couple
of same arguments: domain ID, domain name and domain state. While
the first one is stored in a variable and then passed to all
vshTableRowAppend() calls, the others are passed as a function
call. Switch the latter to variables too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There is a family of convenient macros: NULLSTR, NULLSTR_EMPTY,
NULLSTR_STAR, NULLSTR_MINUS which hides ternary operator.
Generated using the following spatch (and its obvious variants):
@@
expression s;
@@
<+...
- s ? s : "<null>"
+ NULLSTR(s)
...+>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Check for the last multipart message right as the first thing. The
presumption probably was that the last message might still contain a
payload we want to parse. However that cannot be true since that would
have to be a type RTM_NEWNEIGH. This was not caught because older
kernels were note sending NLMSG_DONE and probably relied on the fact
that the parsing just stops after all the messages are walked through,
which the NLMSG_OK macro successfully did.
Resolves: https://issues.redhat.com/browse/RHEL-52449
Resolves: https://bugzilla.redhat.com/2302245
Fixes: a176d67cdf
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The previous check was all wrong since it calculated the how long would
the netlink message be if the netlink header was the payload and then
subtracted that from the whole message length, a variable that was not
used later in the code. This check can fail if there are no additional
payloads, struct rtattr in particular, which we are parsing later,
however the RTA_OK macro would've caught that anyway.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Use convenience macro which does almost the same thing we were doing,
but also pads out the payload length to a multiple of NLMSG_ALIGNTO (4)
bytes.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
This will allow to print full domains info:
Id Name State UUID
---------------------------
Signed-off-by: Nikolai Barybin <nikolai.barybin@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It was released on June 12, 2024.
The update means we no longer have to care about json-c 0.13
present in Leap 15.5, which solves some whitespace issues in
tests.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Some JSON parsers do not like bare types outside of objects or arrays
or do validation of object key uniqueness.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Based on discussion after commit f432114d9c was pushed it was pointed
out that the documentation still mentions the older version.
Fix the documentation to state the new version and introduce ambiguity
for future updates.
Fixes: f432114d9c
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This brings the tool's list of features in sync with qemu
commit 37fbfda8f4145ba1700f63f0cb7be4c108d545de.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This adds an option to use libcpuinfo [1] as data source for
libvirt's list of x86 cpu features. This is purely optional and
does not change the script's behavior if libcpuinfo is not
installed.
libcpuinfo is a cross-vendor, cross-architecture source for CPU
related information that has the capability to replace libvirt's
dependence on qemu's cpu feature list.
[1] https://gitlab.com/twiederh/libcpuinfo
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
On failure to plug the device the cleanup path didn't roll back the FD
passing to qemu thus qemu would hold the FDs indefinitely.
Resolves: https://issues.redhat.com/browse/RHEL-53964
Fixes: b79abf9c3c (vdpafd)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As of libssh commit of libssh-0.11.0~70 [1] the
ssh_channel_get_exit_status() function is deprecated and a new
one is introduced instead: ssh_channel_get_exit_state().
It's not a drop-in replacement, but it's simple enough.
Adapt our libssh handling code to this change.
1: https://git.libssh.org/projects/libssh.git/commit/?id=04d86aeeae73c78af8b3dcdabb2e588cd31a8923
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This mostly reverts commit 65491a2dfe.
There was a bug introduced in glib 2.67.0 which impacted libvirt with
clang causing -Wincompatible-pointer-types-discards-qualifiers warnings.
This was actually fixed quite quickly in 2.67.1 with
https://gitlab.gnome.org/GNOME/glib/-/merge_requests/1719
Our workaround was then broken with glib 2.81.1 due to commit
14b3d5da9019150d821f6178a075d85044b4c255 changing the signature of the
(private) macro we were overriding.
Since odd-number glib releases are development snapshots, and the
original problem was only present in 2.67.0 and no other releases,
just drop the workaround entirely.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add test cases for few edge cases which excercise the XML reporting from
libxml2 in anticipation of upcoming changes of behaviour.
'virschematest' must skip parsing of the broken file altogether so this
patch adds infrastructure to allow that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Upcoming patch will result in having the build directory path in some of
the output files. Replace it by a constant 'ABS_SRCDIR' to avoild
breaking tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Backport the implementation of 'g_string_replace' until we require at
least glib-2.68
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Invoke virCHProcessStop to kill CH process incase of any failures during
restore operation.
Signed-off-by: Purna Pavan Chandra <paekkaladevi@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Cloud-hypervisor now supports restoring with new net fds.
Ref: https://github.com/cloud-hypervisor/cloud-hypervisor/pull/6402
So, pass new tap fds via SCM_RIGHTS to CH's restore api.
Signed-off-by: Purna Pavan Chandra <paekkaladevi@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove the unwanted utility function and make api calls directly from
virCHMonitorSaveVM fn
Signed-off-by: Purna Pavan Chandra <paekkaladevi@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Instead of curl, use low-level socket connections to make restore api
request to CH. This will enable passing new net FDs to CH while
restoring domains with network configuration.
Signed-off-by: Purna Pavan Chandra <paekkaladevi@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
chSocketRecv fn can be used by operations such as restore, which cannot
have a specific poll timeout. The runtime of these operations at server
side (vmm) cannot be determined or capped as it depends on the guest
configuration. Hence, add a new parameter 'use_timeout' which when set
will pass -1 as timeout to poll, otherwise the default PKT_TIMEOUT_MS is
used.
Signed-off-by: Purna Pavan Chandra <paekkaladevi@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move monitor socket connection, response handling and closing FDs code into
new functions in preparation for adding restore support for net devices.
Signed-off-by: Purna Pavan Chandra <paekkaladevi@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Pass "net_<index>" as net id to CH. This is to have better control over
the network configs. This id can be further used in performing
operations like restore etc.
Signed-off-by: Purna Pavan Chandra <paekkaladevi@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The response message from CH for vm.add-net api will be more helpful in
debugging. Hence, log the message instead of just response code.
Signed-off-by: Purna Pavan Chandra <paekkaladevi@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Latest qemu will be dropping some very old machine types (2.0 - 2.3) and
some of our tests use them. As in none of the cases the test actually
needs given machine type, switch them to 'pc' instead.
In one case 'numavcpus-topology-mismatch' this caused switch to a more
modern syntax for NUMA memory specification, but the test is testing a
different aspect, thus we can modernize this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This excercises the old-style NUMA memory commandline used with 5.0 and
older machine types:
-smp 16,sockets=2,dies=1,clusters=1,cores=4,threads=2 \
-numa node,nodeid=0,cpus=0-7,mem=107 \
-numa node,nodeid=1,cpus=8-15,mem=107 \
in contrast to the modern syntax:
-smp 16,sockets=2,dies=1,clusters=1,cores=4,threads=2 \
-object '{"qom-type":"memory-backend-ram","id":"ram-node0","size":112197632}' \
-numa node,nodeid=0,cpus=0-7,memdev=ram-node0 \
-object '{"qom-type":"memory-backend-ram","id":"ram-node1","size":112197632}' \
-numa node,nodeid=1,cpus=8-15,memdev=ram-node1 \
which is tested by the 'cpu-numa1' test case where this was copied from.
This test is added so that other irrelevant test can be modernized.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add dma-translation attribute to qemu command line if specified in
domain conf.
Signed-off-by: Sandesh Patel <sandesh.patel@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add dma_translation attribute to iommu to enable/disable dma traslation
for intel-iommu
Signed-off-by: Sandesh Patel <sandesh.patel@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Depending on timing between QEMU and libvirt an attempt to resume failed
post-copy migration could immediately report a failure in post-copy
phase again even though the migration actually resumed and is
progressing just fine.
This is caused by QEMU reporting the original migration state (i.e.,
postcopy-paused) until migration is successfully resumed and QEMU
switches to postcopy-active. QEMU 9.1 introduced a new
postcopy-recover-setup migration state which is entered immediately
after requesting migration to be resumed and we can reliably wait for
the migration to either continue or fail without being confused by the
old state.
https://issues.redhat.com/browse/RHEL-22166
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds support for recognizing the new migration state reported
by QEMU when post-copy recovery is requested. It is not actually used
for anything yet.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Thing about vshReadlineInit() is - it's called multiple times.
The first time from vshInit(), when @ctl was filled only
partially (most notably, before any argv parsing is done, hence
ctl->imode is set to false). The second time after argv parsing,
from virshInit() -> vshInitReload(). In here, ctl->imode might
have changed and thus vshReadlineInit() can't exit early - it
needs to set up stuff for interactive mode (history basically).
To allow vshReadlineInit() to be called again,
vshReadlineDeinit() must set @autoCompleteOpaque to NULL.
Fixes: cab1e71f01
Resolves: https://issues.redhat.com/browse/RHEL-53560
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
