Each PCI device under a root complex is uniquely identified by its
Requester ID (AKA RID). A Requester ID is a triplet of a Bus number,
Device number, and Function number.
MSIs may be distinguished in part through the use of sideband data
accompanying writes. In the case of PCI devices, this sideband data
may be derived from the Requester ID. A mechanism is required to
associate a device with both the MSI controllers it can address,
and the sideband data that will be associated with its writes to
those controllers.
This commit adds the `msi-map` property for PCI nodes, therefore
creating MSI mapping for each PCI device.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This commit rewrites the `create_pci_node` in the FDT creator to
create multiple PCI nodes based on the vector of `PciSpaceInfo`,
and each PCI node in FDT reflects a PCI segment.
- The PCI MMIO config space, 32 bits PCI device space and 64 bits
PCI device space is re-calculated based on the `PciSpaceInfo` for
each PCI segment.
- A new FDT property `linux,pci-domain` is added.
- The virtio-iommu node is only created for the first PCI segment.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
The constant `PCI_MMIO_CONFIG_SIZE` defined in `vmm/pci_segment.rs`
describes the MMIO configuation size for each PCI segment. However,
this name conflicts with the `PCI_MMCONFIG_SIZE` defined in `layout.rs`
in the `arch` crate, which describes the memory size of the PCI MMIO
configuration region.
Therefore, this commit renames the `PCI_MMIO_CONFIG_SIZE` to
`PCI_MMIO_CONFIG_SIZE_PER_SEGMENT` and moves this constant from `vmm`
crate to `arch` crate.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Currently, a tuple containing PCI space start address and PCI space
size is used to pass the PCI space information to the FDT creator.
In order to support the multiple PCI segment for FDT, more information
such as the PCI segment ID should be passed to the FDT creator. If we
still use a tuple to store these information, the code flexibility and
readablity will be harmed.
To address this issue, this commit replaces the tuple containing the
PCI space information to a structure `PciSpaceInfo` and uses a vector
of `PciSpaceInfo` to store PCI space information for each segment, so
that multiple PCI segment information can be passed to the FDT together.
Note that the scope of this commit will only contain the refactor of
original code, the actual multiple PCI segments support will be in
following series, and for now `--platform num_pci_segments` should only
be 1.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
In order to avoid the identity map region to conflict with a possible
firmware being placed in the last 4MiB of the 4GiB range, we must set
the address to a chosen location. And it makes the most sense to have
this region placed right after the TSS region.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Place the 3 page TSS at an explicit location in the 32-bit address space
to avoid conflicting with the loaded raw firmware.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Reduce the size of the reserved 32-bit address space to the range used
by both the PCI MMIO config data and the 32-bit PCI device space.
This avoids issues when using firmware that is loaded into the very top
of the 32-bit address space as the RAM conflicts with the reserved
memory.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
If the provided binary isn't an ELF binary assume that it is a firmware
to be loaded in directly. In this case we shouldn't program any of the
registers as KVM starts in that state.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This test generates an array of random numbers and then applies the same
trivial algorithm twice -- once in set_apic_delivery_mode and another
time in an anonymous function.
Its usefulness is limited. Drop it to remove one unsafe in code.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
Because anyhow version 1.0.46 has been yanked, let's move back to the
previous version 1.0.45.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This was causing some issues because of the use of 2 different versions
for the vm-memmory crate. We'll wait for all dependencies to be properly
resolved before we move to 0.7.0.
This reverts commit 76b6c62d07.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Instead of creating a MemoryManager from scratch, let's reuse the same
code path used by snapshot/restore, so that memory regions are created
identically to what they were on the source VM.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Storing multiple data coming from the MemoryManager in order to be able
to restore without creating everything from scratch.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Move the definition of MSI space to layout.rs, so other crates can
reference it. Now it is needed by virtio-iommu.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Add a virtio-iommu node into FDT if iommu option is turned on. Now we
support only one virtio-iommu device.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
This commit implements the GIC (including both GICv3 and GICv3ITS)
Pausable trait. The pause of device manager will trigger a "pause"
of GIC, where we flush GIC pending tables and ITS tables to the
guest RAM.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
The rust-vmm crates we're pulling from git have renamed their main
branches. We need to update the branch names we're giving to Cargo,
or people who don't have these dependencies cached will get errors
like this when trying to build:
error: failed to get `vm-fdt` as a dependency of package `arch v0.1.0 (/home/src/cloud-hypervisor/arch)`
Caused by:
failed to load source for dependency `vm-fdt`
Caused by:
Unable to update https://github.com/rust-vmm/vm-fdt?branch=master#031572a6
Caused by:
object not found - no match for id (031572a6edc2f566a7278f1e17088fc5308d27ab); class=Odb (9); code=NotFound (-3)
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Based on `--memory-zone` and `--numa` param in the Cloud Hypervisor
cmdline, the NUMA memory configuration is described. This commit
adds such NUMA memory configuration to the FDT memory node.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
For the purpose of identification, each NUMA node is associated
with a unique token known as a `numa-node-id`. For the purpose of
device tree binding, a `numa-node-id` is a 32-bit integer.
The CPU node is associated with a NUMA node by the presence of a
`numa-node-id` property which contains the node id of the device.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
The optional device tree node distance-map describes the relative
distance (memory latency) between all NUMA nodes.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This is to make sure the NUMA node data structures can be accessed
both from the `vmm` crate and `arch` crate.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This doesn't really affect the build as we ship a Cargo.lock with fixed
versions in. However for clarity it makes sense to use fixed versions
throughout and let dependabot update them.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The Arm CPU topology is defined within the `cpu-map` node, which is
a direct child of the cpus node and provides a container where the
actual topology nodes are listed.
This commit adds an optional cpu-map node in device tree, based on
the Cloud Hypervisor command line vCPU topology information.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
In an Arm system, the hierarchy of CPUs is defined through three
entities that are used to describe the layout of physical CPUs in
the system:
- cluster
- core
- thread
All these three entities have their own FDT node field. Therefore,
This commit adds an AArch64-specific helper to pass the config from
the Cloud Hypervisor command line to the `configure_system`, where
eventually the `create_fdt` is called.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
To support different CPUID entry semantics, we now allow to
specify the compatible condition for each feature entry. Most entries
are considered compatible when they are "bitwise subset", with few
exceptions: 1. "equal", e.g. EBX/ECX/EDX of leaf `0x4000_0000` (KVM
CPUID SIGNATURE); 2. "smaller or equal as a number", e.g. EAX of leaf
`0x7` and leaf `0x4000_0000`;
Signed-off-by: Bo Chen <chen.bo@intel.com>
We now send not only the 'VmConfig' at the 'Command::Config' step of
live migration, but also send the 'common CPUID'. In this way, we can
check the compatibility of CPUID features between the source and
destination VMs, and abort live migration early if needed.
Signed-off-by: Bo Chen <chen.bo@intel.com>
This refactoring ensures all CPUID related operations are centralized in
`arch::x86_64` module, and exposes only two related public functions to
the vmm crate, e.g. `generate_common_cpuid` and `configure_vcpu`.
Signed-off-by: Bo Chen <chen.bo@intel.com>
In order to uniquely identify each SGX EPC section, we introduce a
mandatory option `id` to the `--sgx-epc` parameter.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This patch fixes a few things to support TDVF correctly.
The HOB memory resources must contain EFI_RESOURCE_ATTRIBUTE_ENCRYPTED
attribute.
Any section with a base address within the already allocated guest RAM
must not be allocated.
The list of TD_HOB memory resources should contain both TempMem and
TdHob sections as well.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
If GICR_CTLR is restored before GICR_PROPBASER and GICR_PENDBASER,
the restoring of the latter registers will fail, as the LPI enable
bit is already set in GICR_CTLR. Therefore, in this commit, the
order of restoring GICR registers is changed.
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
This commit implements the GicV3Its Snapshottable trait, including:
- GicV3Its state: GIC registers and ITS registers
- Save/restore logic of GicV3Its state
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This commit implements two helper functions `gicv3_its_attr_access`
and `gicv3_its_tables_access` to access ITS device attributes and
ITS tables.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
In current code, the ITS device fd of GICv3 will be lost after the
creation of GIC. This commit adds a new `its_device` field for the
`GicV3Its` struct, which will be useful to save the ITS device fd.
This fd will be used in restoring the ITS device.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
UEFI need to be loaded to a flash area at the beginning of guest memory
address space. To simulate the flash, we take a piece of RAM and hide
it to the guest. As this is a temporary solution, the hiden RAM for UEFI
should be as little as possible. The size was 64 MiB, that's too much,
4 MiB is enough.
The down side of such simulation is that there is a gap (4 MiB) between
the memory size in VMM's view and that in guest's view. This is to be
fixed by implementing a flash device in future.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Issue from beta verion of clippy:
Error: --> vm-virtio/src/queue.rs:700:59
|
700 | if let Some(used_event) = self.get_used_event(&mem) {
| ^^^^ help: change this to: `mem`
|
= note: `-D clippy::needless-borrow` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
Signed-off-by: Bo Chen <chen.bo@intel.com>
To debug the FDT (Flattened Device Tree), we usually need to modify
source code to save the generted DTB data to disk, and use 'dtc' command
to decode the binary file into a text file to analyze.
It would be ideal if the FDT content can be seen in log.
This commit makes it real by:
- Introducing 'fdt' crate for parsing FDT.
- Printing the content of the FDT in tree view.
The parsing and printing only happen when Debug level logging enabled.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Fixed wrong MPIDR value setting for VCPUs in FDT.
The wrong setting made only 16 VCPUs can be enabled at most, all other
VCPUs were showing off-line.
The issue was introduced when we were migrating FDT-generating code to
vmm-fdt crate.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
With the ability of getting host IPA size in `hypervisor` crate,
we can query the host IPA size through ioctl instead of hardcoding
a maximum IPA size. Therefore this commit removes the hardcoded
maximum host IPA size.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
EDK2 requires the beginning of PCIe high space above 4G address.
In CLH the space follows the RAM. If the RAM space is small, the PCIe
high space could fall bellow 4G.
Here we put it above 512G in FDT to workaround the EDK2 check only when
ACPI is enabled, because EDK2 collects PCIe information from FDT.
The address written in ACPI is not impacted.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Implemented an architecture specific function for loading UEFI binary.
Changed the logic of loading kernel image:
1. First try to load the image as kernel in PE format;
2. If failed, try again to load it as formatless UEFI binary.
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
As the first step to complete live-migration with tracking dirty-pages
written by the VMM, this commit patches the dependent vm-memory crate to
the upstream version with the dirty-page-tracking capability. Most
changes are due to the updated `GuestMemoryMmap`, `GuestRegionMmap`, and
`MmapRegion` structs which are taking an additional generic type
parameter to specify what 'bitmap backend' is used.
The above changes should be transparent to the rest of the code base,
e.g. all unit/integration tests should pass without additional changes.
Signed-off-by: Bo Chen <chen.bo@intel.com>
The function used to calculate "gicr-typer" value has nothing with
DeviceManager. Now it is moved to AArch64 specific files.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
On FDT, VMM can allocate IRQ from 0 for devices.
But on ACPI, the lowest range below 32 has to be avoided.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Before this change, the FDT was loaded at the end of RAM. The address of
FDT was not fixed.
While UEFI (edk2 now) requires fixed address to find FDT and RSDP.
Now the FDT is moved to the beginning of RAM, which is a fixed address.
RSDP is wrote to 2 MiB after FDT, also a fixed address.
Kernel comes 2 MiB after RSDP.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Now all crates use edition = "2018" then the majority of the "extern
crate" statements can be removed. Only those for importing macros need
to remain.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Remove unnecessary code for these structs. Moving this also allows the
removal of the arch_gen crate.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
For now, memory layout on arm64 is sparse and is conflict with uefi.
Here, we do some rearrangement to let it compact and compatible with
uefi support.
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Simplify snapshot & restore code by using generics to specify helper
functions that take / make a Serialize / Deserialize struct
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Fixes the current codebase so that every cargo clippy can be run with
the beta toolchain without any error.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
error: name `GPIOInterruptDisabled` contains a capitalized acronym
Error: --> devices/src/legacy/gpio_pl061.rs:46:5
|
46 | GPIOInterruptDisabled,
| ^^^^^^^^^^^^^^^^^^^^^ help: consider making the acronym lowercase, except the initial letter: `GpioInterruptDisabled`
|
= note: `-D clippy::upper-case-acronyms` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#upper_case_acronyms
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
error: name `RSDPPastRamEnd` contains a capitalized acronym
--> arch/src/lib.rs:59:5
|
59 | RSDPPastRamEnd,
| ^^^^^^^^^^^^^^ help: consider making the acronym lowercase, except the initial letter: `RsdpPastRamEnd`
|
= note: `-D clippy::upper-case-acronyms` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#upper_case_acronyms
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
With CONFIG_PVH in stable kernels for some time we should deprecate the
use of alternative boot methods since this will lead to a much simpler
boot flow and CI process.
See: #2231
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This commit switches the default serial device from 16550 to the
Arm dedicated UART controller PL011. The `ttyAMA0` can be enabled.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
On AArch64, interrupt controller (GIC) is emulated by KVM. VMM need to
set IRQ routing for devices, including legacy ones.
Before this commit, IRQ routing was only set for MSI. Legacy routing
entries of type KVM_IRQ_ROUTING_IRQCHIP were missing. That is way legacy
devices (like serial device ttyS0) does not work.
The setting of X86 IRQ routing entries are not impacted.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Add support extracting the sections out for a TDVF file which can be
then used to load the TDVF and TD HOB data into their appropriate
locations.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add the skeleton of the "tdx" feature with a module ready inside the
arch crate to store implementation details.
TEST=cargo build --features="tdx"
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In particular update for the vmm-sys-util upgrade and all the other
dependent packages. This requires an updated forked version of
kvm-bindings (due to updated vfio-ioctls) but allowed the removal of our
forked version of kvm-ioctls.
The changes to the API from kvm-ioctls and vmm-sys-util required some
other minor changes to the code.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The interrupt tests were not being run as they were erroneously under a
feature guard that does not exist in arch.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
If the function can never return an error this is now a clippy failure:
error: this function's return value is unnecessarily wrapped by `Result`
--> virtio-devices/src/watchdog.rs:215:5
|
215 | / fn set_state(&mut self, state: &WatchdogState) -> io::Result<()> {
216 | | self.common.avail_features = state.avail_features;
217 | | self.common.acked_features = state.acked_features;
218 | | // When restoring enable the watchdog if it was previously enabled. We reset the timer
... |
223 | | Ok(())
224 | | }
| |_____^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_wraps
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This reflects that it generates CPUID state used across all vCPUs.
Further ensure that errors from this function get correctly propagated.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Move the code for populating the CPUID with KVM HyperV emulation details from
the per-vCPU CPUID handling code to the shared CPUID handling code.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Move the code for populating the CPUID with details of the CPU
identification from the per-vCPU CPUID handling code to the shared CPUID
handling code.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Move the code for populating the CPUID with details of the maximum
address space from the per-vCPU CPUID handling code to the shared CPUID
handling code.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
We must explicitly mark these values as u8 as the function that consumes
them takes a T and needs to use the specific width.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
We will need the GDT API for the hypervisor's x86 instruction
emulator implementation, it's better if the arch crate depends on the
hypervisor one rather than the other way around.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Before Virtio-mmio was removed, we passed an optional PCI space address
parameter to AArch64 code for generating FDT. The address is none if the
transport is MMIO.
Now Virtio-PCI is the only option, the parameter is mandatory.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Virtio-mmio is removed, now virtio-pci is the only option for virtio
transport layer. We use MSI for PCI device interrupt. While GICv2, the
legacy interrupt controller, doesn't support MSI. So GICv2 is not very
practical for Cloud-hypervisor, we can remove it.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
If the user specified a maximum physical bits value through the
`max_phys_bits` option from `--cpus` parameter, the guest CPUID
will be patched accordingly to ensure the guest will find the
right amount of physical bits.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The OneRegister literally means "one (arbitrary) register". Just call it
"Register" instead. There is no need to inherit KVM's naming scheme in
the hypervisor agnostic code.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
A new version of vm-memory was released upstream which resulted in some
components pulling in that new version. Update the version number used
to point to the latest version but continue to use our patched version
due to the fix for #1258
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In order to speed up the Linux boot (so as to avoid it having to scan a
large number of pages) place the MP table directly after the SMBIOS
table if there is sufficient room. The start address of the SMBIOS table
is one of the three (and the largest) location that the MP table can
also be located at.
Before:
[ 0.000399] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.014945] check: Scanning 1 areas for low memory corruption
After:
[ 0.000284] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000421] found SMP MP-table at [mem 0x000f0090-0x000f009f]
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The states of GIC should be part of the VM states. This commit
enables the AArch64 VM states save/restore by adding save/restore
of GIC states.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Currently for AArch64, the GICv3-ITS is tried to be created first
when PCI is not needed, which is unnecessary. This commit fixes
the problem.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Since calling `KVM_GET_ONE_REG` before `KVM_VCPU_INIT` will
result in an error: Exec format error (os error 8). This commit
decouples the vCPU init process from `configure_vcpus`. Therefore
in the process of restoring the vCPUs, these vCPUs can be
initialized separately before started.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
The value of GIC register `GICR_TYPER` is needed in restoring
the GIC states. This commit adds a field in the GIC device struct
and a method to construct its value.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
In AArch64 systems, the state of GIC device can only be
retrieved from `KVM_GET_DEVICE_ATTR` ioctl. Therefore to implement
saving/restoring the GIC states, we need to make sure that the
GIC object (either the file descriptor or the device itself) can
be extracted after the VM is started.
This commit refactors the code of GIC creation by adding a new
field `gic_device_entity` in device manager and methods to set/get
this field. The GIC object can be therefore saved in the device
manager after calling `arch::configure_system`.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This commit adds a function which allows to save RDIST pending
tables to the guest RAM, as well as unit test case for it.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This commit implements the `get_device_attr` method for the
`KVM_GET_DEVICE_ATTR` ioctl. This ioctl will be used in retrieving
the GIC status.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This commit moves the GIC-related code to a separate module.
Therefore the implementation of GIC registers can be introduced
to the new module.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This commit ports code from firecracker and refactors the existing
AArch64 code as the preparation for implementing save/restore
AArch64 vCPU, including:
1. Modification of `arm64_core_reg` macro to retrive the index of
arm64 core register and implemention of a helper to determine if
a register is a system register.
2. Move some macros and helpers in `arch` crate to the `hypervisor`
crate.
3. Added related unit tests for above functions and macros.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Misspellings were identified by https://github.com/marketplace/actions/check-spelling
* Initial corrections suggested by Google Sheets
* Additional corrections by Google Chrome auto-suggest
* Some manual corrections
Signed-off-by: Josh Soref <jsoref@users.noreply.github.com>
Inject CPUID leaves for advertising KVM HyperV support when the
"kvm_hyperv" toggle is enabled. Currently we only enable a selection of
features required to boot.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Shrink GICDevice trait to contain hypervisor agnostic API's only, which
are used in generating FDT.
Move all KVM specific logic into KvmGICDevice trait.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
This commit enables some mmio-related integration test cases on
AArch64, including:
* some vhost_user test cases
* virtio-blk test cases
* pmem test cases
Also this commit contains a bug fix in creating virtio-blk device.
Previously, when creating the FDT, the virtio-blk device was
labeled in the reverse order of address allocation.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
The retry order to create virtual GIC is GICv3-ITS, GICv3 and GICv2.
But there was not log message to show what was finally created.
The log messages also mute the warning for unused "log" crate.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
SGX expects the EPC region to be reported as "reserved" from the e820
table. This patch adds a new entry to the table if SGX is enabled.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The support for SGX is exposed to the guest through CPUID 0x12. KVM
passes static subleaves 0 and 1 from the host to the guest, without
needing any modification from the VMM itself.
But SGX also relies on dynamic subleaves 2 through N, used for
describing each EPC section. This is not handled by KVM, which means
the VMM is in charge of setting each subleaf starting from index 2
up to index N, depending on the number of EPC sections.
These subleaves 2 through N are not listed as part of the supported
CPUID entries from KVM. But it's important to set them as long as index
0 and 1 are present and indicate that SGX is supported.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the presence of one or multiple SGX EPC sections from the VM
configuration, the MemoryManager will allocate a contiguous block of
guest address space to hold the entire EPC region. Within this EPC
region, each EPC section is memory mapped.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The type is now hypervisor::Vm. Switch from KVM specific name vm_fd to a
generic name just like 8186a8eee6 ("vmm: interrupt: Rename vm_fd").
No functional change.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
The OVMF firmware loops around looking for an entry marking the end of
the table. Without this entry processing the tables is an infinite loop.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Taken from crosvm: 44336b913126d73f9f8d6854f57aac92b5db809e and adapted
for Cloud Hypervisor.
This is basic and incomplete support but Linux correctly finds the DMI
data based on this:
root@clr-c6ed47bc1c9d473d9a3a8bddc50ee4cb ~ # dmesg | grep -i dmi
[ 0.000000] DMI: Cloud Hypervisor cloud-hypervisor, BIOS 0
root@clr-c6ed47bc1c9d473d9a3a8bddc50ee4cb ~ # dmesg | grep -i smbio
[ 0.000000] SMBIOS 3.2.0 present.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This commit fixes some warnings introduced in the previous
hyperviosr crate PR.Removed some unused variables from arch/aarch64
module.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Start moving the vmm, arch and pci crates to being hypervisor agnostic
by using the hypervisor trait and abstractions. This is not a complete
switch and there are still some remaining KVM dependencies.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
There are two CPUID leaves for handling CPU topology, 0xb and 0x1f. The
difference between the two is that the 0x1f leaf (Extended Topology
Leaf) supports exposing multiple die packages.
Fixes: #1284
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The extended topology leaf (0x1f) also needs to have the APIC ID (which
is the KVM cpu ID) set. This mirrors the APIC ID set on the 0xb topology
leaf
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Currently, not every feature of the cloud-hypervisor is enabled
on AArch64, which means that on AArch64 machines, the
`run_unit_tests.sh` needs to be tailored and some unit test cases
should be run on x86_64 only.
Also this commit fixes the typo and unifies `Arm64` and `AArch64`
in the AArch64 document.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Implemented GSI allocator and system allocator for AArch64.
Renamed some layout definitions to align more code between architectures.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
For correctness, when the CPUID supports the LA57 feature, the VMM sets
the CR4.LA57 register, which means a fifth level of page table might be
needed. Even if it's not needed because the kernel should not use
addresses over 1GiB, it's better to define this new level anyway.
This patch only applies to the Linux boot codepath, which means it
affects both vmlinux without PVH and bzImage binaries. The bzImage
does not need this since the page tables and CR4 registers are set in
the decompression code from the kernel.
And for vmlinux with PVH, if we follow the PVH specification, the kernel
must be responsible for setting things up, but the implementation is
missing. This means for now that PVH does not support LA57 with 5 levels
of paging.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In case the host CPU exposes the support for LA57 feature through its
cpuid, the CR4.LA57 bit is enabled accordingly.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When booting VM on AArch64 machines, we need to construct the
flattened device tree before loading kernel. Hence here we add
the implementation of the flattened device tree for AArch64.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
As on AArch64 systems we need register mpidr to create the
flattened device tree, here in this commit we add ported AArch64
register implementation from Firecracker and related changes to
make this commit build.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This commit adds ported code of Generic Interrupt Controller (GIC)
software implementation for AArch64, including both GICv2 and
GICv3 devices. These GIC devices are actually emulated by the
host kernel through KVM and will be used in the guest VM as the
interrupt controller for AArch64.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This commit adds the memory layout design for AArch64 in
`arch/src/aarch64/layout.rs` and related changes in
`arch/src/lib.rs` to make sure this commit can build.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Now the flow of both architectures are aligned to:
1. load kernel
2. create VCPU's
3. configure system
4. start VCPU's
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
This is a preparing commit to build and test CH on AArch64. All building
issues were fixed, but no functionality was introduced.
For X86, the logic of code was not changed at all.
For ARM, the architecture specific part is still empty. And we applied
some tricks to workaround lint warnings. But such code will be replaced
later by other commits with real functionality.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Use the ACPI feature to control whether to build the mptable. This is
necessary as the mptable and ACPI RSDP table can easily overwrite each
other leading to it failing to boot.
TEST=Compile with default features and see that --cpus boot=48 now
works, try with --no-default-features --features "pci" and observe the
--cpus boot=48 also continues to work.
Fixes: #1132
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The setup_mptables() call which is not used on ACPI builds has a side
effect of testing whether there was enough RAM which one of the unit
tests was relying on. Add a similar check for the RSDP address.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Fill and write to guest memory the necessary boot module
structure to allow a guest using the PVH boot protocol
to load an initramfs image.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
We need the project to rely on kvm-bindings and kvm-ioctls branches
which include the serde derive to be able to serialize and deserialize
some KVM structures.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Commit 2adddce2 reorganized the crate for a cleaner multi architecture
(x86_64 and aarch64) support.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* load the initramfs File into the guest memory, aligned to page size
* finally setup the initramfs address and its size into the boot params
(in configure_64bit_boot)
Signed-off-by: Damjan Georgievski <gdamjan@gmail.com>
We set it to 0xff, which is for unregistered loaders.
The kernel checks that the bootloader ID is set when e.g. loading
ramdisks, so not setting it when we get a bootparams header from the
loader will prevent the kernel from loading ramdisks.
Fixes: #918
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Validate correct GDT entries, initial segment configuration, and control
register bits that are required by PVH boot protocol.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Expand the unit tests to cover the configure_system() code when
using the PVH boot protocol. Verify the method for adding memory
map table entries in the format specified by PVH boot protocol.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Fill the hvm_start_info and related memory map structures as
specified in the PVH boot protocol. Write the data structures
to guest memory at the GPA that will be stored in %rbx when
the guest starts.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
In order to properly initialize the kvm regs/sregs structs for
the guest, the load_kernel() return type must specify which
boot protocol to use with the entry point address it returns.
Make load_kernel() return an EntryPoint struct containing the
required information. This structure will later be used
in the vCPU configuration methods to setup the appropriate
initial conditions for the guest.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Create supporting definitions to use the hvm start info and memory
map table entry struct definitions from the linux-loader crate in
order to enable PVH boot protocol support
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Since the kvm crates now depend on vmm-sys-util, the bump must be
atomic.
The kvm-bindings and ioctls 0.2.0 and 0.4.0 crates come with a few API
changes, one of them being the use of a kvm_ioctls specific error type.
Porting our code to that type makes for a fairly large diff stat.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Remove ACPI table creation from arch crate to the vmm crate simplifying
arch::configure_system()
GuestAddress(0) is used to mean no RSDP table rather than adding
complexity with a conditional argument or an Option type as it will
evaluate to a zero value which would be the default anyway.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add basic processor details to the DSDT table. The code has to be
slightly convoluted (with the second pass over the cpu_devices vector)
in order to keep the objects alive long enough in order to be able to
take their reference.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
We need to rely on the latest kvm-ioctls version to benefit from the
recent addition of unregister_ioevent(), allowing us to detach a
previously registered eventfd to a PIO or MMIO guest address.
Because of this update, we had to modify the current constraint we had
on the vmm-sys-util crate, using ">= 0.1.1" instead of being strictly
tied to "0.2.0".
Once the dependency conflict resolved, this commit took care of fixing
build issues caused by recent modification of kvm-ioctls relying on
EventFd reference instead of RawFd.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
To avoid a clash with to_bytes() for the unsigned integer types that is
coming in a future release.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This was verified by comparing the ASL from disassembling the DSDT
before and after. All the individual AML components themselves are also
unit tested.
Fixes: #352
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The virtual IOMMU exposed through virtio-iommu device has a dependency
on ACPI. It needs to expose the device ID of the virtio-iommu device,
and all the other devices attached to this virtual IOMMU. The IDs are
expressed from a PCI bus perspective, based on segment, bus, device and
function.
The guest relies on the topology description provided by the IORT table
to attach devices to the virtio-iommu device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The PCI Express Firmware specification says that the region may
be included in the E820 tables (but it must always be in the ACPI
tables.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The PCI Express Firmware spec says that the region to be used for PCI
MMCONFIG should be reserved as part of the motherboard's resources in
the ACPI tables.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The PCI MMCONFIG area must be below 4GiB and must not be part of the
device space. Shrink the device area and put the PCI MMCONFIG region
above it.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Patch the table with the currently used constants. This will be relevant
when we want to adjust the size of the PCI device area to accomodate the
PCI MMCONFIG region.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
These are part of RAM and are used as the initial page table entries for
booting the OS and firmware (identity mapping.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Using the existing layout module start documenting the major regions of
RAM and those areas that are reserved. Some of the constants have also
been renamed to be more consistent and some functions that returned
constant variables have been replaced.
Future commits will move more constants into this file to make it the
canonical source of information about the memory layout.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The last byte was missing from the E820 RAM area. This was due to the
function using the last address relative to the first address in the
range to calculate the size. This incorrectly calculated the size by
one. This produced incorrect E820 tables like this:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffffffe] usable
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
After the 32-bit gap the memory is shared between the devices and the
RAM. Ensure that the ACPI tables correctly indicate where the RAM ends
and the device area starts by patching the precompiled tables. We get
the following valid output now from the PCI bus probing (8GiB guest)
[ 0.317757] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.319035] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.320215] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.321431] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 0.322613] pci_bus 0000:00: resource 8 [mem 0x240000000-0xfffffffff window]
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
There was an off-by-error in the result making the hole one byte too
big and ending at an address too high.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The starting length of the MCFG table was too long resulting in the
kernel trying to get extra MCFG entries from the table that weren't
there resulting in the following error message from the kernel:
PCI: no memory for MCFG entries
The MCFG table also has an 8 bytes of padding at the start before the
table begins.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The command "cargo build --no-default-features" does not recursively
disable the default features across the workspace. Instead add an acpi
feature at the top-level, making it default, and then make that feature
conditional on all the crate acpi features.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Put the ACPI support behind a feature and ensure that the code compiles
without that feature by adding an extra build to Travis.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add an I/O port "device" to handle requests from the kernel to shutdown
or trigger a reboot, borrowing an I/O used for ACPI on the Q35 platform.
The details of this I/O port are included in the FADT
(SLEEP_STATUS_REG/SLEEP_CONTROL_REG/RESET_REG) with the details of the
value to write in the FADT for reset (RESET_VALUE) and in the DSDT for
shutdown (S5 -> 0x05)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The DSDT must declare the interrupt used by the serial device. This
helps the guest kernel matching the right interrupt to the 8250 serial
device. This is mandatory in case the IRQ routing is handled by ACPI, as
we must let ACPI know what do do with pin based interrupts.
One thing to notice, if we were using acpi=noirq from the kernel command
line, this would mean ACPI is not in charge of the IRQ routing, and the
device COM1 declaration would not be needed.
One additional requirement is to provide the appropriate interrupt
source override for the legacy ISA interrupts (0-15), which will give
the right information to the guest kernel about how to allocate the
associated IRQs.
Because we want to keep the MADT as simple as possible, and given that
our only device requiring pin based interrupt is the serial device, we
choose to only define the pin 4.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Only add the ACPI PNP device for the COM1 serial port if it is not
turned off with "--serial off"
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Currently this has a hardcoded range from 32GiB to 64GiB for the 64-bit PCI
range. It should range from the top of ram to 64GiB.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The MCFG table contains some PCI configuration details in particular
details of where the enhanced configuration space is.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This provides important APIC configuration details for the CPU. Even
though it duplicates some of the information already included in the
mptable it is necessary when booting with ACPI as the mptable is not
used.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Latest clippy version complains about our existing code for the
following reasons:
- trait objects without an explicit `dyn` are deprecated
- `...` range patterns are deprecated
- lint `clippy::const_static_lifetime` has been renamed to
`clippy::redundant_static_lifetimes`
- unnecessary `unsafe` block
- unneeded return statement
All these issues have been fixed through this patch, and rustfmt has
been run to cleanup potential formatting errors due to those changes.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The linux-loader crate has been updated with a regnerated bootparams.rs
which has changed the API slightly. Update to the latest linux-loader
and adapt the code to reflect the changes:
* e820_map is renamed to e820_table (and all similar variables updated)
* e820entry is renamed to boot_e820_entry
* The E820 type constants are not no longer included
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Update all dependencies with "cargo upgrade" with the exception of
vmm-sys-utils which needs some extra porting work.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In the context of VFIO, we use Vt-d, which means we rely on an IOMMU.
Depending on the IOMMU capability, and in particular if it is not able
to perform SC (Snooping Control), the memory will not be tagged as WB
by KVM, but instead the vCPU will rely on its MTRR/PAT MSRs to find the
appropriate way of interact with specific memory regions.
Because when Vt-d is not involved KVM sets the memory as WB (write-back)
the VMM should set the memory default as WB. That's why this patch sets
the MSR MTRRdefType with the default memory type being WB.
One thing that it is worth noting is that we might have to specifically
create some UC (uncacheable) regions if we see some issues with the
ranges corresponding to the MMIO ranges that should trap.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
