Use vshPrintExtra to report this message. It is a human-readable
explanation rather than an error.
Also, it is a very special system that runs with no filesystems.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Failing to print the table is also a reason to return failure
and print the reported error.
Switch to the usual pattern where we fall through the cleanup
label right after setting ret to true instead of infering the
return value from the number of filesystems returned.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Do not use 'ret' throughout the whole function to avoid confusion
and comparison of unsigned 'i' against signed 'ret'.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Trivially implement this by deleting the bogus check in
vshTableSafeEncode.
Now it returns an empty string for an empty string instead
of returning NULL without setting an error.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The wireshark-2.4.0 is almost 2 years old now. Assuming anybody
interested in running latest libvirt doesn't run old wireshark,
it is safe to do this. It also simplifies the code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As advertised in previous commits, wireshark has changed the way
that plugins register. In fact, it has done so two times since
the last time we've touched our code (wireshark v2.5.0 and
v2.9.0). Use the wireshark script from respective releases to
generate newer registration callbacks and put them into our code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In order to be able to dissect libvirt protocol the wireshark
plugin needs to be registered. So far this plugin registration
code was generated on every build using a script that was copied
over from wireshark's tools/ directory.
This is suboptimal, because the way that plugins register changes
across wireshark releases. Therefore, let's keep the generated
file in the git, put the command line used to generate the file
into a comment and remove the script.
This solution allows us to put different registration mechanism
into one file (under #ifdef-s) and thus compile with wider range
of wireshark releases.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the majority of the packet-libvirt.h content into
packet-libvirt.c and expose only register functions which are the
only ones that are not static.
The rationale behind is that packet-libvirt.h will be included
from packet.c and therefore the header file needs to be as clean
as possible.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_IMPL calls.
Move the verify() statement to the end of the macro and drop
the semicolon, so the compiler will require callers to add a
semicolon.
While we are touching these call sites, standardize on putting
the closing parenth on its own line, as discussed here:
https://www.redhat.com/archives/libvir-list/2019-January/msg00750.html
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_DECL calls.
Drop the semicolon from the final statement of the macro, so
the compiler will require callers to add a semicolon.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Allow the addition of the <protocol ver='n'/> to the provided XML.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We have this very handy macro called VIR_STEAL_PTR() which steals
one pointer into the other and sets the other to NULL. The
following coccinelle patch was used to create this commit:
@ rule1 @
identifier a, b;
@@
- b = a;
...
- a = NULL;
+ VIR_STEAL_PTR(b, a);
Some places were clean up afterwards to make syntax-check happy
(e.g. some curly braces were removed where the body become a one
liner).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Strictly speaking, this should go near vshCompleter typedef
declaration. However, I find it more useful near actual completer
implementations.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The tools/virt-xml-validate.in file is licensed under the terms of
the GPL, but then says "You should have received a copy of the
GNU *Lesser* General Public License". Thus scratch the "Lesser" here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Our use of INCLUDES in Makefile.am hearkens back to when we had to
cater to automake 1.9.6 (thanks, RHEL 5) which lacked AM_CPPFLAGS.
Modern Automake flags a warning that INCLUDES is deprecated, and
now that we mandate RHEL 7 or better (see commit c1bc9c66), we no
longer have to cater to the old spelling. This change will also
make it easier to do per-binary CPPFLAGS.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit c0a8ea45 removed the use of gettextize, and the setting of
GETTEXT_CPPFLAGS, but did not scrub the now-unused variable from
Makefile.am snippets.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In 600462834f we've tried to remove Author(s): lines
from comments at the beginning of our source files. Well, in some
files while we removed the "Author" line we did not remove the
actual list of authors.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Our code is not bug free. The refcounting I introduced will
almost certainly not work in some use cases. Provide a script
that will remove all the XATTRs set by libvirt so that it can
start cleanly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 3072ded3 changed the waya to format the vcpu pinning info
and forget to get cpumap for each vcpu during the loop, that cause
vcpupin command will display vcpu 0 info for other vcpus.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
The driver is unmaintained, untested and severely broken for
quite some time now. Since nobody even reported any issue with it
let us drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU can report how many times during post-copy migration the domain
running on the destination host tried to access a page which has not
been migrated yet.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Require that all headers are guarded by a symbol named
LIBVIRT_$FILENAME
where $FILENAME is the uppercased filename, with all characters
outside a-z changed into '_'.
Note we do not use a leading __ because that is technically a
namespace reserved for the toolchain.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This introduces a syntax-check script that validates header files use a
common layout:
/*
...copyright header...
*/
<one blank line>
#ifndef SYMBOL
# define SYMBOL
....content....
#endif /* SYMBOL */
For any file ending priv.h, before the #ifndef, we will require a
guard to prevent bogus imports:
#ifndef SYMBOL_ALLOW
# error ....
#endif /* SYMBOL_ALLOW */
<one blank line>
The many mistakes this script identifies are then fixed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.
In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.
With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to find the
author of a particular bit of code.
This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.
The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Rename a variable to make it clear that it holds the client organization
rather than the server organization.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virt-pki-validate tool is extracting components in the x509
certificate Subject field. Unfortunately the regex it is is using is far
too strict, and so truncating valid data. It needs to consider ',' as a
field separator, and if that's not there take all data until the EOL.
With the broken regex:
$ echo " Subject: O=Test,CN=guestHyp1ver" | sed 's+.*CN=\(.[a-zA-Z \._-]*\).*+\1+'
guestHyp
And with the fixed regex
$ echo "Subject: O=Test,CN=guestHyp1ver" | sed 's+.*CN=\([^,]*\).*+\1+'
guestHyp1ver
Reported-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since commit v4.3.0-336-gc84726fbdd all
{hypervisor-,}cpu-{baseline,compare} commands use a generic
vshExtractCPUDefXMLs helper for extracting individual CPU definitions
from the provided input file. The helper wraps the input file in a
<container> element so that several independent elements can be easily
parsed from the file. This works fine except when the file starts with
XML declaration (<?xml version="1.0" ... ?>) because the XML declaration
cannot be put inside any element. In fact it has to be at the very
beginning of the XML document without any preceding white space
characters. We can just simply skip the XML declaration.
https://bugzilla.redhat.com/show_bug.cgi?id=1592737
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a command to allow for setting various dynamic IOThread polling
interval scope (poll-max-ns, poll-grow, and poll-shrink). Describe
the values in the virsh.pod in as generic terms as possible. The
more specific QEMU algorithm has been divulged in the previous patch.
Based heavily on code originally posted by Pavel Hrdina
<phrdina@redhat.com>, but altered to only provide one command
and to not managed a poll disabled state.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Add an --iothread qualifier to domstats and an explanation in
the man page. Describe the values in as generic terms as possible
allowing each hypervisor to provide a specific algorithm to utilize
the values as it sees fit.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
This patch introduces a new shutdown reason "daemon" in order
to indicate that the daemon needed to force shutdown the domain
as the best course of action to take at the moment.
This action would occur during reconnection when processing
encounters an error once the monitor reconnection is successful.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit 4f4c3b13 (v3.3) fixed an issue where performing cleanup of
libvirt objects could sometimes lose error messages, by adding code
to copy the libvirt error into last_error prior to cleanup paths.
However, it caused a regression: on other paths, some errors are now
printed twice, if libvirt still remembers in its thread-local
storage that an error was set even after virsh cleared last_error.
For example:
$ virsh -c test:///default snapshot-delete test blah
error: Domain snapshot not found: no domain snapshot with matching name 'blah'
error: Domain snapshot not found: no domain snapshot with matching name 'blah'
Fix things by telling libvirt to discard any thread-local errors at
the same time virsh prints an error message (whether or not the libvirt
error is the same as what is stored in last_error).
Update the virsh-undefine testsuite (partially reverting portions of
commit b620bdee, by removing -q, to more easily pinpoint which commands
are causing which messages), now that there is only one error message
instead of two.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For non-Linux platforms we have
virHostValidateCGroupControllers() stub which only reports an
error. But we are not marking the ignored arguments the way we
should.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This removes code duplication and simplifies cgroup detection.
As a drawback we will not have separate messages to enable cgroup
controller in kernel or to mount it. On the other side the rewrite
adds support for cgroup v2.
The kernel config support was wrong because it was parsing
'/proc/self/cgroup' instead of '/proc/cgroups/' file.
The mount suggestion is removed as well because it will not work
with cgroup v2.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The domxml-to-native virsh command accepts either --xml or --domain
option followed by a file or domain name respectively. The --domain
option is documented as required, which means an argument with no option
is treated as --xml. Commit v4.3.0-127-gd86531daf2 broke this by making
--domain optional and thus an argument with no option was treated as
--domain.
https://bugzilla.redhat.com/show_bug.cgi?id=1633077
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We're passing size_t but using format for unsigned long.
Introduced in latest vshTable rework patches.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Local lengthy unicode-unreliable table formatting was replaced by new
API. Great example of how new API saves space and time.
Removed a lot of string lenght calculation used by the local table.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
Local lengthy unicode-unreliable table formatting was replaced by new
API. Great example of how new API saves space and time.
Removed a lot of string lenght canculation used by the local table.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
I've moved all the printing from cmdDomblkinfoPrint() to cmdDomblkinfo(),
and renamed the cmdDomblkinfoPrint() to cmdDomblkinfoGet(), since nature of
that function changed from gathering and printing informations only to
gathering information. This I believe simplifies the functions and
makes the implementation of vshTable API simpler.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1630164
The domiflist command is designed to show a brief information on
domain interfaces. One piece of information that is shows is
"Source" - source network, device, name, bridge. However, it's
ignoring vhostuser for which we can show the unix socket it's
associated with.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
It doesn't really make sense for us to have stdlib.h and string.h but
not stdio.h in the internal.h header.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
In 2e97450425 we've mistakenly removed gettext macro for
translating static strings. This results in table header being
printed in English regardless of user locale.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The helper function virshSnapshotCreate (formerly vshSnapshotCreate)
has had dead variables since commit a00c37f2 (Sep 2011).
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1609454
Add some cautionary words related to the create and delete
NWFilter Binding use cases and possible issues that may result
to the virsh nwfilter-binding-{create|delete} descriptions
and the virNWFilterBinding{CreateXML|Delete) API descriptions.
Essentially summarizing commit 2d9318b6c without using the
shoot yourself in the foot wording.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of printing it straight in virsh, it creates table struct
which is filled with header and rows(domains). It allows us to know
more about table before printing to calculate alignment right.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
It solves problems with alignment of columns. Width of each column
is calculated by its biggest cell. Should solve unicode bug.
In future, it may be implemented in virsh, virt-admin...
This API has 5 public functions:
- vshTableNew - adds new table and defines its header
- vshTableRowAppend - appends new row (for same number of columns as in
header)
- vshTablePrintToStdout
- vshTablePrintToString
- vshTableFree
https://bugzilla.redhat.com/show_bug.cgi?id=1574624https://bugzilla.redhat.com/show_bug.cgi?id=1584630
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1615680
Commit id d45bee449 updated the pool-define-as qualifier descriptions
to add some new fields, but neglected to modify the command item list
in order to add those fields as well.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This reverts commit b3d9b08ef7.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 5d40272ea6.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are few places where dlopen() is called. This call means we
have to link with DLOPEN_LIBS. However, instead of having each
final, installable library linking with it, move the directive to
the source that introduced the dependency.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
While local builds succeed fine, a build worker building in a chroot
environment is encountering errors when linking some items in tools/nss
and tests, e.g.
[ 469s] libtool: link: gcc -shared -fPIC -DPIC -Wl,--whole-archive nss/.libs/libnss_libvirt_impl.a -Wl,--no-whole-archive -lpthread -lutil -ltirpc -fstack-protector-strong -grecord-gcc-switches -O2 -fstack-protector-strong -g -Wl,--version-script=./nss/libvirt_nss.syms -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,--no-copy-dt-needed-entries -Wl,-z -Wl,defs -grecord-gcc-switches -O2 -fstack-protector-strong -g -pthread -Wl,-soname -Wl,libnss_libvirt.so.2 -o nss/.libs/libnss_libvirt.so.2
[ 469s] nss/.libs/libnss_libvirt_impl.a(libvirt_nss_la-virjsoncompat.o): In function `virJSONJanssonOnce':
[ 469s] /home/abuild/rpmbuild/BUILD/libvirt-4.6.0/src/util/virjsoncompat.c:63: undefined reference to `dlopen'
[ 469s] /home/abuild/rpmbuild/BUILD/libvirt-4.6.0/src/util/virjsoncompat.c:79: undefined reference to `dlsym'
...
A similar problem was fixed in commit b018ada3 and inspires this fix.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introducing the pool as a noop. Integration inside the build
system. Implementation will be in the following commits.
Signed-off-by: Clementine Hayat <clem@lse.epita.fr>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add --alias to support custom alias in virsh attach-interface.
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add --alias to support custom disk alias in virsh attach-disk.
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1601377
Fix typo from commit id d45bee449 for the parent_wwpn field
resulting in parent_wwnn being printed twice.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1600330
Add nwfilterbinding schema in virt-xml-validate for autoprobing.
Add document of nwfilterbinding schema in tools/virt-xml-validate.pod.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
QEMU commit bf1e7140e adds reporting of new balloon statistic to QEMU
2.12. Value represents the amount of memory that can be quickly
reclaimed without additional I/O. Let's add that too.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
After you go through command mentioned above, completer
finds what state the device is currently in, and suggests
an opposite state.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Functions virshSecretEventNameCompleter, virshPoolEventNameCompleter,
virshNodedevEventNameCompleter allocates only enough space
for array of N strings.
However these are null terminated strings, so program needs to
alloc space for array of N + 1 strings.
How to replicate error: valgrind virsh, use completer for
'nodedev-event --event' or 'pool-event --event' or
'secret-event --event'.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
Adding sata bus address support to the optional address parameter of virsh
attach-disk. The address is used as controller.bus.unit. e.g.
sata:0.0.0
Signed-off-by: Han Han <hhan@redhat.com>
Adding usb bus address support to the optional address parameter
of virsh attach-disk. The address is used as bus:port. e.g. usb:1:1.
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In [1], <type> are described as "on_poweroff", "on_reboot",
"on_crash". but we accept "poweroff", "reboot" and "crash".
This patch adds documentation for them.
[1]: https://libvirt.org/formatdomain.html#elementsEvents
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch introduces --all to show all block devices info
of guests like:
virsh # domblkinfo w08 --all
Target Capacity Allocation Physical
---------------------------------------------------
hda 42949672960 9878110208 9878110208
vda 10737418240 10736439296 10737418240
Target Capacity Allocation Physical
---------------------------------------------------
hda 40.000 GiB 9.200 GiB 9.200 GiB
vda 10.000 GiB 9.999 GiB 10.000 GiB
For inactive domains using networked storage, a "-" will
be printed instead of the value since it's not possible
to determine the value without the storage connection.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This new switch can be used to set
VIR_CONNECT_GET_ALL_DOMAINS_STATS_NOWAIT flag for stats
fetching API.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Replace instances where we previously called virGetLastError just to
either get the code or to check if an error exists with
virGetLastErrorCode to avoid a validity pre-check.
Signed-off-by: Ramy Elkest <ramyelkest@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This command is a virsh wrapper for virConnectBaselineHypervisorCPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This command is a virsh wrapper for virConnectCompareHypervisorCPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
The domain capabilities XML contains host CPU model tailored to a
specific hypervisor and since it's enclosed in <mode name='host-model'>
element rather then the required <cpu> it's impossible to directly use
the host CPU model as an input to, e.g., cpu-compare command. To make
this more convenient, vshExtractCPUDefXML now accepts full domain
capabilities XML and automatically transforms the host CPU models into
the form accepted by libvirt APIs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both cpu-compare and cpu-baseline commands accept more that just CPU
definition XML(s). For users' convenience they are able to extract the
CPU definition(s) even from domain XML or capabilities XML. The main
differences between the two commands is in the number of CPU definitions
they expect: cpu-compare wants only one CPU definition while
cpu-baseline expects one or more CPUs.
The extracted code forms a new vshExtractCPUDefXML function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to cpu-models these two commands do not operate on a domain
and should be listed in the "Host and Hypervisor" commands section.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The next patch will use it in virsh-completer.c for returning the name
list of nodedev events.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The next patch will use it in virsh-completer.c for returning the name
list of pool events.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The next patch will use it in virsh-completer.c for returning the
strings of domain event name. At the same time, rename it to
avoid possible name clashing.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The next patch will use it in virsh-completer.c for returning the name
list of secret events.
The patch code originally authored by Michal Privoznik, Please refer to
https://www.redhat.com/archives/libvir-list/2018-May/msg01022.html
I splitted it to 2 patches with tiny change.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These two functions were duplicating some cleanup paths, so let's just merge
both cleanup and error paths together. To distinguish whether we need to
clean-up the return value let's keep it in @tmp until the function is successful
in which case we set @ret to the value of @tmp and set @tmp to NULL.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than have virJSONValueArraySize return a -1 when the input
is not an array and then splat an error message, let's check for
an array before calling and then change the return to be a size_t
instead of ssize_t.
That means using the helper virJSONValueIsArray as well as using a
more generic error message such as "Malformed <something> array".
In some cases we can remove stack variables and when we cannot,
those variables should be size_t not ssize_t. Alter a few references
of if (!value) to be if (value == 0) instead as well.
Some callers can already assume an array is being worked on based
on the previous call, so there's less to do.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently the VSH_OT_ARGV options don't support complete, But some of
VSH_OT_ARGV options are gonna support complete in upcoming patches.
Once applied the upcoming completion patches for VSH_OT_ARGV options, If
we don't ignore VSH_OT_ARGV here, The vshReadlineOptionsGenerator will
be called, Hence complete output will consist of the result by command
completer + the result by option completer, It's confusing.
e.g.
$ virsh domstats --domain <TAB><TAB>
--backing --interface --list-paused --perf --vcpu
--balloon leap42.3 --list-persistent --raw win10
--block --list-active --list-running sles12sp3
--cpu-total --list-inactive --list-shutoff sles15
--enforce --list-other --list-transient --state
After this patch and the upcoming completion patches:
$ virsh domstats --domain <TAB><TAB>
leap42.3 sles12sp3 sles15 win10
Signed-off-by: Lin Ma <lma@suse.com>
It's helpful for users while they type certain kind of VSH_OT_ARGV options.
e.g.
$ virsh domstats --domain sles12sp3 --d<TAB>
Signed-off-by: Lin Ma <lma@suse.com>
The first entry in the returned array is the substitution for TEXT. It
causes unnecessary output if other commands or options share the same
prefix, e.g.
$ virsh des<TAB><TAB>
des desc destroy
or
$ virsh domblklist --d<TAB><TAB>
--d --details --domain
This patch fixes the above issue.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
centralize the definition of macro VIRSH_COMMON_OPT_DOMAIN_FULL to virsh.h
to avoid unnecessary duplicated definition
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If another event in background while running libvirt-guests.sh
completely undefines a guest it will no more be available for proper
reporting of its shutdown.
This appears in the log as:
Failed to determint state of guest: <UUID>. Not tracking it anymore
Shutdown of guest complete
The first message already reports that we are giving up on the guest
(per UUID which is all we have left at that point). To avoid the message
with an empty guest_name in such a case lets check what guest_name
returned and only print a report on valid content.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Dariusz Gadomski <dariusz.gadomski@canonical.com>
The recent fix to libvirt-guests.sh.in works for what it intended to fix
(variable scope) but failed to adapt the loop in check_guests_shutdown
correctly. Due to that it currently might detect all guests as "Failed to
determine state of guest" by bad var content or just assumes they are shut
down by picking up an empty variable.
This commit fixes loop to use the passed value and the call in the loop
to actually use the variable assigned in the iterated.
Fixes: 7e476356 "tools: fix variable scope in in check_guests_shutdown"
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1764668
Reviewed-by: Dariusz Gadomski <dariusz.gadomski@canonical.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Historically we have relied on autopoint/gettextize to install a
standard po/Makefile.in.in. There is very limited scope for customizing
this and it also causes a bunch of extra stuff to be pulled into
configure.ac which potentially clashes with gnulib. Writing make rules
for po file management is no more difficult than any other rules libvirt
has, so stop using autopoint/gettextize.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1529256
If one of the virStorageVolLookupBy{Key|Name|Path} succeeds and
we have a @vol, then clear the last libvirt error; otherwise, a
subsequent "other" failure may cause vshReportError to erroneously
report the wrong error as well as a reported 'vshError' error that
caused the failure.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Historically we have used a bare lxc:/// URI for connecting to LXC. This
is different from our practice with QEMU, UML, Parallels, Libxl, BHyve
and VirtualBox drivers, which all use a path of '/system' or '/session'
or both.
By making LXC allow '/system', we have fully standardized on the use of
either '/system' or '/session' for all the stateful drivers that run
inside libvirtd.
Support for lxc:/// is of course maintained for back-compat.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Historically we have used a bare xen:/// URI for connecting to the
legacy Xen driver. The new libxl Xen driver follows the new practice
of allowing '/system' as a path, as well as bare '/' for compat with
the old Xen driver.
This documents xen:///system as the preferred format for Xen, leaving
xen:/// as an undocumented feature just for back-compat.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
libvirt-guests.sh when run with more active guests than requested to
shut down in parallel will run until it times out only shutting down
the first set of guests.
This patch fixes parallel shutdown by fixing a variable scope issue
where check_guests_shutdown unintentionally reset $guests which
prevented further progress.
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1688508
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Instead of appearing as one long paragraph, split the output to list
each command option on its own line for better readability.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-path volume pool', or
'virsh vol-name volume pool', or 'virsh vol-key volume'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-info volume pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-dumpxml volume pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-wipe volume pool algorithm'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-download volume file pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-upload volume file pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-delete volume pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-clone source-vol target-vol pool'.
While making the modification clean up the description a bit too in
order to help clarify under what circumstances the source-vol could be
found if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Clean up the formatting to make the output a bit more readable at
least with respect to not having one paragraph of output. Each
option will start on its own line.
Signed-off-by: John Ferlan <jferlan@redhat.com>
We can use:
domifaddr f26-cloud --source arp
to get the address.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
This time around it's not enough to just pick the latest commit,
because with aed87bb2aa6ed83b49574eb982e3bdd4c36acf17 keycodemapdb
renamed the 'rfb' keycode to 'qnum' and we need to accept the new
name while maintaining backwards compatibility.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add the ability to provide the adapter parent_wwnn and parent_wwpn
or the parent_fabric_wwn on the virsh command line for the pool
define/create as commands. Update the virsh.pod description.
Signed-off-by: John Ferlan <jferlan@redhat.com>
One short sentence won't do it justice, but it could help by listing
scsi_hostN and vHBA to point one in the right direction.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The description was missing the wwnn and wwpn names for the
--adapter-wwnn and --adapter-wwpn switches. Just add it to be
clear that the fields cannot be empty (IOW they are not boolean).
Signed-off-by: John Ferlan <jferlan@redhat.com>
so it's not affected by flags that might be passed in $(*_LIBS) like
-L/usr/lib which might result in linking against system library and
requiring incorrect version of private symbols
Signed-off-by: Jan Palus <atler@pld-linux.org>
Currently if cmd->skipChecks is set (done only from completers)
some basic checks are skipped because we're working over
partially parsed command. See a26ff63ae4 for more detailed
explanation. Anyway, the referenced commit was too aggressive in
disabling checks and effectively returned success even in clear
case of failure. For instance:
# domif-getlink --interface <TAB><TAB>
causes virshDomainInterfaceCompleter() to be called, which calls
virshDomainGetXML() which eventually calls
vshCommandOptStringReq(.., name = "domain"); The --domain
argument is required for the command and if not present -1 should
be returned to tell the caller the argument was not found. Well,
zero is returned meaning the argument was not found but it's not
required either.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The commands which requires a pool to perform any action for a volume is
throwing a segfault when you pass the volume name before a pool name or
without the argument '--pool'.
An example that works:
virsh # vol-list loops-pool
Name Path
-------------------------------------------------------------------
loop0 /mnt/loop0
virsh # vol-info --pool loops-pool lo<TAB>
An example that does not work:
virsh # vol-list loops-pool
Name Path
-------------------------------------------------------------------
loop0 /mnt/loop0
virsh # vol-info lo<TAB>
Segmentation Fault
The example 'vol-info' can be executed as 'vol-info loop0 --pool
loops-pool'. So, this commit fixes this problem when the arguments are
inverted and avoids the segfault.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While libvirt-guests.sh is running cases can let guest_is_on fail which
causes check_guests_shutdown to print output.
That output shall not spill into the users of function
check_guests_shutdown which is therefore now returning values in a
variable like guest_is_on already did.
Original-Author: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Modified-By: Jorge Niedbalski <niedbalski@ubuntu.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Cast away enum type in places where we don't wish to cover all cases.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The variable names for the options and information about a command
should have an underscore in places where the virsh command has a
hyphen. The function callback name should capitalize the letter after
the hyphen. This was not used in 'blockcommit', 'blockcopy', 'blockjob',
'blockpull', and 'blockresize' commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Previously we've removed the data only in virshUpdateDiskXML when
changing the disk source for the CDROM since the backing store would be
invalid. Move the code into a separate function and callit from
virshFindDisk which is also used when detaching disk.
The detaching code does not necessarily need to get the full backing
chain since it will need to act on the one managed by libvirt anyways
and this also takes care of problems when parts of the backing store
were invalid due to buggy RBD detection code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Similarly to other commands add an argument which allows to check the
XML which would be used to execute the operation instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Undefined symbols are a bad thing in general because they can get
resolved in unexpected ways at runtime if multiple sources provide the
same symbol name. For example both glibc and libtirpc may provide XDR
symbols and we want to ensure that we resolve to libtirpc if that's what
we originally built against.
The toolchain maintainers thus strongly recommend that all applications
use the '-z defs' linker flag to prevent undefined symbols. This is
shortly becoming part of the default linker flags for RPMs. As an added
benefit this aligns Linux builds with Windows builds, where the linker
has never permitted undefined symbols.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently when the script validates the PKI files and
the certificate 'Subject:' field contains RDNs after
the Common Name (CN), these values are also included,
creating a false result that the CN is not correct.
A small change to the sed regex fixes this issue, by
extracting only the value for CN and nothing else. The
regex is replaced with the exact same regex used to
extract the CN value from the client certificate.
"ln" will not replace an existing symlink, so if you run 'make install'
twice, the second time will get an error:
ln: failed to create symbolic link 'virsh': File exists
We must always remove the symlink target first.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The bash-completion project documents that only those scripts
from $BASH_COMPLETIONS_DIR that share name with the current
command for which <TAB> was hit are loaded [1]. This means, that
vsh script we have there is not loaded. We have to create
symlinks for virsh and virt-admin.
At the same time, we have to create new RPM package because
virt-admin and client packages are independent. That means we
cannot place the vsh script in either of them. What we can do is
to have a different package that contains the completion script
and then virt-admin and client packages contain only the symlink
and require the bash-completion package.
1: https://github.com/scop/bash-completion#faq
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Only a small subset of VIR_CONNECT_LIST_DOMAINS_* flags are
actually used for this completer. Remove the unused ones. Note
that this is unrelated to other commands using
VIR_CONNECT_LIST_DOMAINS_* (i.e. cmdList) as this commit targets
the completer only and nothing else.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Unfortunately, we have a number of aliases in virsh and even though
these are not visible any more, we have to support them. The problem is
that when trying to print help for the alias, we get SIGSEGV because
there isn't any @def structure anymore and we need to query the command
being aliased instead.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1538570
Signed-off-by: Erik Skultety <eskultet@redhat.com>
These helpers are called from a single place only - cmdHelp wrapper and
just before the wrapper invokes the helpers, it performs the search,
either for command group or for the command itself, except the result is
discarded and the helper therefore needs to do it again. Drop this
inefficient handling and pass the @def structure rather than a name,
thus preventing the helper from needing to perform the search again.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This is a slight change from previous patches since virSecret
does not have a name only UUID strings.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The virConnectListAllNWFilters() has no extra flags yet, which
simplifies things a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Yet again, we don't need listing by device capabilities, so flags
are unused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This one is a bit simpler since virStoragePoolListAllVolumes()
has no flags yet.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The functions defined in these sources are referenced all over
the place, however, compiler only when building with readline.
Thus when building without it linker gets sad as it can't find
them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When building without readline, this function does nothing but
return false. Without touching any of its arguments which
triggers a build error. Therefore, provide a stub that has
arguments marked as unused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The current state of art is as follows:
1) vshReadlineOptionsGenerator() generate all possible --options
for given command, and then
2) vshReadlineOptionsPrune() clears out already provided ones
from the list.
Not only this brings needless memory complexity it is also not
trivial to get right. We can switch to easier approach: just
don't add already specified --options in the first step.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
For given domain fetch list of defined interfaces. This can be
used for commands like domif-getlink and others. If available,
the interface name is returned (e.g. "vnet0", usually available
only for running domains), if not the MAC address is returned.
Moreover, the detach-interface command requires only MAC address
and therefore we have new flag that forces the completer to
return just the MAC address.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have everything prepared let the fun begin. This
completer is very simple and returns domain names. Moreover,
depending on the command it can return just a subset of domains
(e.g. only running/paused/transient/.. ones).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The only purpose of this file is to be sourced. After that one
can use completion even for their bash:
# virsh list --<TAB><TAB>
--all --inactive ...
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This command is going to be called from bash completion script in
the following form:
virsh complete -- start --domain
Its only purpose is to return list of possible strings for
completion. Note that this is a 'hidden', unlisted command and
therefore there's no documentation to it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Similarly to the previous commit, once we've presented an
--option for a command to the user it makes no sense to offer it
again. Therefore, we can prune all already specified options. For
instance, after this patch:
virsh # migrate --verbose <TAB><TAB>
will no longer offer --verbose option.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of having completers prune returned string list based on
user's input we can do that right after the callback is called.
Only strings matching the prefix will be presented to the user
then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have everything prepared we can call options'
completer again. At the same time, pass partially parsed input to
the completer callback - it will help the callbacks to narrow
down the list of returned options based on user's input. For
instance, if the completer is supposed to return list of
interfaces depending on user input it may return just those
interfaces defined for already specified domain. Of course,
completers might ignore this parameter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the future, completer callbacks will receive partially parsed
command (and thus possibly incomplete). However, we still want
them to use command options fetching APIs we already have (e.g.
vshCommandOpt*()) and at the same time don't report any errors
(nor call any asserts).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It's better to fetch list of either commands or options just once
and then iterate over it. Moreover, it makes future completers
way simpler as they will return string lists too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When returning a string that needs escaping there are two
scenarios that can happen. Firstly, user already started the
string with a quote (or double quote) in which case we don't need
to do anything - readline takes care of that. However, if they
haven't typed anything yet, we need to escape the string
ourselves.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have a way of retrieving partly parsed command we
don't need duplicate code that parses the user's input.
Yes, this code removes call of opt's completer, but:
a) current implementation is broken anyway, and
b) it will be added back shortly
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the future, this function is going to be called from
vshReadlineParse() to provide parsed input for completer
callbacks. The idea is to allow the callbacks to provide more
specific data. For instance, for the following input:
virsh # domifaddr --domain fedora --interface <TAB><TAB>
the --interface completer callback is going to be called. Now, it
is more user friendly if the completer offers only those
interfaces found in 'fedora' domain. But in order to do that it
needs to be able to retrieve partially parsed result.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When parsing cmd line which has "--" on it, this is leaked.
Problem is, parser->getNextArg() allocates new string and stores
it into tkdata. But as soon as "--" is detected 'continue' is
issued without any free of the allocated memory.
==5304== 3 bytes in 1 blocks are definitely lost in loss record 1 of 782
==5304== at 0x4C2AF50: malloc (vg_replace_malloc.c:299)
==5304== by 0x8BB5AA9: strdup (strdup.c:42)
==5304== by 0x55842CA: virStrdup (virstring.c:941)
==5304== by 0x172B21: _vshStrdup (vsh.c:162)
==5304== by 0x175E8E: vshCommandArgvGetArg (vsh.c:1622)
==5304== by 0x17551D: vshCommandParse (vsh.c:1418)
==5304== by 0x175F25: vshCommandArgvParse (vsh.c:1638)
==5304== by 0x130940: virshParseArgv (virsh.c:820)
==5304== by 0x130C49: main (virsh.c:922)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The list_guests function in libvirt-guests uses 'grep -v' to filter
Xen domain0 from a list of guests. If domain0 is the only item in
the list, 'grep -v' returns 1, causing the 'stop' operation to fail
when action is 'suspend'. Improve the filtering by using sed to remove
domain0 from the list of guests.
This commit fixes the virsh prompt when reconnection to the same URI is
called: `virsh # connect --readonly` (Reconnect). The problem is
happening because the code is considering URI (name) as a mandatory
parameter to change the prompt. This commit remove the assignment into
`priv->readonly` from `if (name)` conditional.
Before:
virsh # uri
qemu:///system
virsh # connect --readonly
virsh #
After:
virsh # uri
qemu:///system
virsh # connect --readonly
virsh >
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1507737
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
My latest commit of a785186446 uncovered a problem we fixed
in 9eb23fe2 but then reverted in 834c5720e4. Turns out, some
systems (I'm looking at you OS X) have ancient readline with
broken header file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
According to the man page <interface-device> can be specified either by
name or MAC address, adjust the command's help accordingly.
Signed-off-by:ZhiPeng Lu <lu.zhipeng@zte.com.cn>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Because WARN_CFLAGS and COVERAGE_CFLAGS are not set globally, we
rely on each binary built to include WARN_CFLAGS/COVERAGE_CFLAGS.
But it is easy to forget those - e.g. libvirt_shell.la. However,
don't enable WARN_FLAGS (i.e. don't include AM_CFLAGS) for
wireshark plugin - parts of that code are generated and trigger
some warnings.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
There are couple of limitations when it comes to option types and
flags for the options. For instance, VSH_OT_STRING cannot have
VSH_OFLAG_REQ set (commit c7543a728). For some reason this is
checked in vshCmddefHelp() but not in vshCmddefCheckInternals().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
It is literally only a wrapper around virBitmapNewData() and
virBitmapFormat(), only the naming was wrong since it was introduced.
And because we have virBitmap*String functions where the meaning of
the 'String' is constant, this might confuse someone.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since update to glibc-2.26 removed the /usr/include/rpc/rpc.h we used until now,
it showed us a problem with not using XDR_CFLAGS properly. On linux that
variable has usually -I/usr/include/tirpc because we already probe for it
properly, we just don't use it everywhere we need. It is needed by wireshark
dissector as well as testutilsqemu.c (through includes) so the build fails with:
wireshark/src/packet-libvirt.c:33:10: fatal error: rpc/xdr.h: No such file or directory
#include <rpc/xdr.h>
^~~~~~~~~~~
and
In file included from ../src/logging/log_manager.h:29:0,
from ../src/qemu/qemu_domain.h:40,
from testutilsqemu.c:11:
../src/logging/log_protocol.h:9:10: fatal error: rpc/rpc.h: No such file or directory
#include <rpc/rpc.h>
^~~~~~~~~~~
Since lot of tests use testutilsqemu.c it is easier to add XDR_CFLAGS to
AM_CFLAGS than adding it to all $binary_CFLAGS. It's just for tests and we
already have bunch of CFLAGS there anyway.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The 'set-lifcycle-action' is throwing a weird error after executing it with
the '--help' option. The command output is showing the options 'type' and
'action' are as optional, but they aren't. Both are required.
virsh # set-lifecycle-action --help
...
SYNOPSIS
set-lifecycle-action <domain> [--type <string>] [--action <string>] ...
...
OPTIONS
[--domain] <string> domain name, id or uuid
error: internal error: bad options in command: 'set-lifecycle-action'
After applying this patch, both arguments are required now.
virsh # set-lifecycle-action --help
...
SYNOPSIS
set-lifecycle-action <domain> <type> <action> [--config] ...
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1509870
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
In some cases there's dangling backward slash at the end of multi
line macros. While technically the code works, it will stop if
some empty lines are removed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Commit fdeac7a05f tried to fix the output
of 'virsh domxml-to-native --help' by switching types around. One of the
changes broke the option parser. VSH_OT_ARGV should be used only for
variable argument count, not to make the help generator look pretty.
The correct option type in this case is VSH_OT_STRING as it's not
mandatory now since it can be substituted by using --domain.
This makes --help for this command look incorrect, but the parser works
as it should.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1494400
Option --full will always display the name and MAC address of the
the interface. Both virsh help and virsh man page didn't mention that.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
The command tries to match interface in domain definition by MAC
address or interface name. However, since it's possible to
configure two interfaces with the same MAC address, it may
happen that the XPath returns two or more nodes. We should check
for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1497396
The other APIs accept both, ifname and MAC address. There's no
reason virDomainInterfaceStats can't do the same.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1497396
The current implementation reads the stats from the host.
However, this doesn't work for all types of interfaces as not all
of them have a representation in the host. For instance,
interface type='user' doesn't.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The command "info migrate" of qemu outputs the dirty-pages-rate during
migration, but page size is different in different architectures. So
page size should be output to calculate dirty pages in bytes.
Page size is already implemented with commit
030ce1f8612215fcbe9d353dfeaeb2937f8e3f94 in qemu.
Now Implement the counter-part in libvirt.
Signed-off-by: Chao Fan <fanc.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1476775
For the virsh pool-{define|create}-as command, let's allow using
--secret-uuid on the command line as an alternative to --secret-usage
(added for commit id '8932580'), but ensure that they are mutually
exclusive.
In my previous commit of b1d87f9ad9 I've made a typo breaking
the FreeBSD build. s/ipAaddr/ipAddr/
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This commit adds new events for two methods and operations: *PoolBuild() and
*PoolDelete(). Using the event-test and the commands set below we have the
following outputs:
$ sudo ./event-test
Registering event callbacks
myStoragePoolEventCallback EVENT: Storage pool test Defined 0
myStoragePoolEventCallback EVENT: Storage pool test Created 0
myStoragePoolEventCallback EVENT: Storage pool test Started 0
myStoragePoolEventCallback EVENT: Storage pool test Stopped 0
myStoragePoolEventCallback EVENT: Storage pool test Deleted 0
myStoragePoolEventCallback EVENT: Storage pool test Undefined 0
Another terminal:
$ sudo virsh pool-define test.xml
Pool test defined from test.xml
$ sudo virsh pool-build test
Pool test built
$ sudo virsh pool-start test
Pool test started
$ sudo virsh pool-destroy test
Pool test destroyed
$ sudo virsh pool-delete test
Pool test deleted
$ sudo virsh pool-undefine test
Pool test has been undefined
This commits can be a solution for RHBZ #1475227.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1475227
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So we refer to the terms 'persistent' and 'transient' across the whole
man page, without describing it further, but more importantly, how the
create command affects it, i.e. explicitly stating that domain created
via the 'create' command are going to be transient or persistent,
depending on whether there is an existing persistent domain with a
matching <name> and <uuid>, in which case it will remain persistent, but
will run using a one-time configuration, otherwise it's going to be
transient and will vanish once destroyed.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The documentation mistakenly states that the unit for returned
values is kB (multiple of 1000), while in fact we are returning
KiB (multiple of 1024).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Requesting an automated switch to a post-copy migration (using
--timeout-postcopy) without actually enabling post-copy migration (using
--postcopy) doesn't really do anything. Let's make this dependency
explicit to avoid unexpected behavior.
https://bugzilla.redhat.com/show_bug.cgi?id=1455023
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Fix the warning generated on PPC by virt-host-validate for IOMMU.
In case of PPC, IOMMU in the host kernel either has it or it's not
compiled in. The /sys/kernel/iommu_groups check is good enough to
verify if it was compiled with the kernel or not.
Modify the error message when "if (sb.st_nlink <= 2)" to indicate
what the problem would be since there would be no @bootarg.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
It was not entirely clear that PARALLEL_SHUTDOWN setting is applied only
when the desired action is "shutdown".
Signed-off-by: Lily Zhu <lizhu@redhat.com>
A variable named 'socket' clashes with the function of the same
name, causing build failures due to warnings on some platforms.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This commit adds the unix socket URL support to 'domdisplay' command.
Before, even if an user was using unix socket to define a spice graphics,
the command 'domdisplay' showed that the settings were not supported. Now,
the command shows the proper URL: spice+unix://foo/bar.sock.
Settings:
<graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1'>
<listen type='address' address='127.0.0.1'/>
</graphics>
<graphics type='spice'>
<listen type='socket' socket='/tmp/spice.sock'/>
</graphics>
Before:
virsh # domdisplay --all Windows7
vnc://127.0.0.1:0
After:
virsh # domdisplay --all Windows7
vnc://127.0.0.1:0
spice+unix:///tmp/spice.sock
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1336720
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Driver modules proved to be reliable for a long time. Since support for
not building modules complicates the code and makefiles drop it.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
In Wireshark commit of 7cd6906056922e4b8 (contained in v2.4.0)
the tvb_new_subset() function was renamed to
tvb_new_subset_length_caplen(). However, we can take the extra
step and rename to tvb_new_subset_remaining() directly (see
Wireshark commit 0ecfc7280cf3d7). The reasoning is that there is
no other protocol in the packet than libvirt. Therefore, from the
point that libvirt dissector takes over till the end of the
packet it's all libvirt packet.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
While looking to implement a migrate-getmaxdowntime command (coming),
I noticed that the setmaxdowntime is incorrectly looking at its
parameter as a signed longlong. Not sure how that got past gcc, but
here's a simple patch to make the command line parsing and the parameter to
the worker functions all have the correct (unsigned) type.
Signed-off-by: Scott Garfinkle <seg@us.ibm.com>
The command 'domdisplay' is not freeing the domain pointer properly in
cleanup section. See the error below:
virsh # domdisplay WINDOWS7
vnc://127.0.0.1:0
virsh # quit
error: One or more references were leaked after disconnect from the hypervisor
Valgrind report:
==29168== 66 (56 direct, 10 indirect) bytes in 1 blocks are definitely lost in loss record 154 of 239
==29168== at 0x4C2FB55: calloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==29168== by 0x5505324: virAllocVar (viralloc.c:560)
==29168== by 0x555A61B: virObjectNew (virobject.c:199)
==29168== by 0x561F367: virGetDomain (datatypes.c:284)
==29168== by 0x5680979: get_nonnull_domain (remote_driver.c:8143)
==29168== by 0x5680979: remoteDomainLookupByName (remote_client_bodies.h:3047)
==29168== by 0x5623D9A: virDomainLookupByName (libvirt-domain.c:425)
==29168== by 0x160480: virshLookupDomainInternal (virsh-util.c:59)
==29168== by 0x160547: virshCommandOptDomainBy (virsh-util.c:98)
==29168== by 0x13D3A9: cmdDomDisplay (virsh-domain.c:10963)
==29168== by 0x165680: vshCommandRun (vsh.c:1327)
==29168== by 0x12E320: main (virsh.c:953)
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Resolves a bug in domxml-to-native command option, so that the
following command displays the help information correctly:
'virsh domxml-to-native --help'.
Signed-off-by: Daniel Liu <srwx4096@gmail.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
The option allows someone to run domain-to-native on already existing
domain without the need of supplying their XML. It is basically
wrapper around 'virsh dumpxml | virsh domxml-to-native /dev/stdin'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=835476
Signed-off-by: Daniel Liu <srwx4096@gmail.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use ATTRIBUTE_FALLTHROUGH, introduced by commit
5d84f5961b, instead of comments to
indicate that the fall through is an intentional behavior.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
When building with clang 4.0.0, virsh build fails like this:
gmake[3]: Entering directory '/usr/home/novel/code/libvirt/tools'
CC virsh-virsh.o
In file included from virsh.c:45:
In file included from /usr/local/include/readline/readline.h:31:
/usr/local/include/readline/rltypedefs.h:35:22: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
typedef int Function () __attribute__ ((deprecated));
^
void
/usr/local/include/readline/rltypedefs.h:36:24: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
typedef void VFunction () __attribute__ ((deprecated));
^
void
/usr/local/include/readline/rltypedefs.h:37:26: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
typedef char *CPFunction () __attribute__ ((deprecated));
^
void
/usr/local/include/readline/rltypedefs.h:38:28: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
typedef char **CPPFunction () __attribute__ ((deprecated));
^
void
In file included from virsh.c:45:
/usr/local/include/readline/readline.h:385:23: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
extern int rl_message ();
^
void
5 errors generated.
gmake[3]: *** [Makefile:2823: virsh-virsh.o] Error 1
Fix that by adding -D_FUNCTION_DEF to READLINE_CFLAGS to fix *Function
related warnings and add a check for stdarg.h so we have HAVE_STDARG_H
defined that's needed by the readline headers to use proper rl_message
declaration.
Bug report on the readline mailing list:
http://lists.gnu.org/archive/html/bug-readline/2017-05/msg00004.html
Commit 24d4a0a1f removed the non-existent "dying" state from the list
of possible domain states given in the virsh manpage, but didn't
correct the count of states from 8 down to 7. This patch fixes that
mismatch by completely removing any reference to the exact number of
states (thus preventing a potential future mismatch), while wording
the sentence in a more readable/truthful manner.
Now that the node_device driver is aware of CCW devices, let's hook up
virsh so that we can filter them properly.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Make CCW devices available to the node_device driver. The devices are
already seen by udev so let's implement necessary code for detecting
them properly.
Topologically, CCW devices are similar to PCI devices, e.g.:
+- ccw_0_0_1a2b
|
+- scsi_host0
|
+- scsi_target0_0_0
|
+- scsi_0_0_0_0
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
QEMU will likely report the details of it shutting down, particularly
whether the shutdown was initiated by the guest or host. We should
forward that information along, at least for shutdown events. Reset
has that as well, however that is not a lifecycle event and would add
extra constants that might not be used. It can be added later on.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1384007
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1374126
Due to how the processing for authentication using polkit works, the
virshConnect code must first "attempt" an virConnectOpenAuth and then
check for a "special" return error code VIR_ERR_AUTH_UNAVAILABLE in
order to attempt to "retry" the authentication after performing a creation
of a pkttyagent to handle the challenge/response for the client.
However, if pkttyagent creation is not possible for the authentication
being attempted (such as perhaps a "qemu+ssh://someuser@localhost/system"),
then the same failure pattern would be returned and another attempt to
create a pkttyagent would be done. This would continue "forever" until
someone forced quit (e.g. ctrl-c) from virsh as the 'authfail' was not
incremented when creating the pkttyagent.
So add a 'agentCreated' boolean to track if we've attempted to create the
agent at least once and force a failure if that creation returned the same
error pattern.
This resolves a possible never ending loop and will generate an error:
error: failed to connect to the hypervisor
error: authentication unavailable: no polkit agent available to authenticate action 'org.libvirt.unix.manage'
NB: If the authentication was for a sufficiently privileged client, such as
qemu+ssh://root@localhost/system, then the remoteDispatchAuthList "allows"
the authentication to use libvirt since @callerUid would be 0.
The reason for introducing two capabilities, one for the device itself
(cap 'mdev') and one for the parent device listing the available types
('mdev_types'), is that we should be able to do
'virsh nodedev-list --cap' not only for existing mdev devices but also
for devices that support creation of mdev devices, since one day libvirt
might be actually able to create the mdev devices in an automated way
(just like we do for NPIV/vHBA).
https://bugzilla.redhat.com/show_bug.cgi?id=1452072
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Similarly to previous commit, implement sparse streams feature
for vol-upload. This is, however, slightly different approach,
because we must implement a function that will tell us whether
we are in a data section or in a hole. But there's no magic
hidden in here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add a new --sparse switch that does nothing more than
enables the sparse streams feature for this command. Among with
the switch new helper function is introduced: virshStreamSkip().
This is the callback that is called whenever daemon sends us a
hole. In the callback we reflect the hole in underlying file by
seeking as many bytes as told.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Ideally, this would be generated, but to achieve that
corresponding XDR definitions needed to go into a different .x
file. But they belong just to the one that they are right now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virt-install and virt-manager both default to explicitly setting
"io='native'" in the disk "driver" tag. virsh, however, does not and also
does not provide an option to specify that setting at all. As a result,
disks use a different IO mechanism (the default, "threads") when attached
post-setup using virsh. Adding this option allows users to keep disk
performance consistent for disks attached at install, and those attached
afterward.
https://bugzilla.redhat.com/show_bug.cgi?id=1330940
The virsh command 'domblkinfo' returns the capacity, allocation and phisycal
size of the devices attached in a domain. Usually, this sizes are very big
and hard to understand and calculate. This commits introduce a human readable
support to check the size of each field easilly.
For example, the command before:
virsh # domblkinfo my_domain hda
Capacity: 21474836480
Allocation: 14875545600
Physical: 21474836480
and after this patch:
virsh # domblkinfo my_domain hda --human
Capacity: 20.000G
Allocation: 13.900G
Physical: 20.000G
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The parameter is reported by virDomainGetJobStats API and
VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event and it can be used to identify
the operation (migration, snapshot, ...) to which the reported
statistics belong.
https://bugzilla.redhat.com/show_bug.cgi?id=1441563
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
There are several functions in virshInit which can fail, especially
when running win32 builds under WINE. Currently virsh just exits
without reporting what error happened.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In virsh we quite often get the domain XML just to initialize the XPath
parser so that we can extract information.
Add helpers which will simplify this by wrapping the getting of the XML
and parsing it along with error reporting.
Additionally a second helper also gets the domain object from the
parameters and releases it so that functions which need the XML as only
source of data can be simplified further.
Avoid the annoying issue where the public object freeing APIs overwrite
the error set by helper functions, since they don't invoke the callback.
The new helper remembers the error only if no previous error was set.
virDomainFree has it's quirks (does not like NULL pointers, resets
libvirt errors). Replace it by a virsh helper which will allow us to
centrally fix issues with it.
The syntax-check rule will prohibit new uses of virDomainFree.
Move virshLookupDomainBy, virshCommandOptDomainBy and
virshCommandOptDomainBy to the helper file. Additionally turn the
virshCommandOptDomainBy macro into a function.
==18591== 16 bytes in 1 blocks are definitely lost in loss record 41 of 183
==18591== at 0x4C2B934: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==18591== by 0x54EBB1C: virAllocN (viralloc.c:191)
==18591== by 0x1628CA: _vshMalloc (vsh.c:136)
==18591== by 0x1344C4: virshVcpuPinQuery (virsh-domain.c:6603)
==18591== by 0x1344C4: cmdVcpuPin (virsh-domain.c:6707)
==18591== by 0x1631BF: vshCommandRun (vsh.c:1312)
==18591== by 0x12DBB1: main (virsh.c:961)
Introduce STRICT_FRAME_LIMIT_CFLAGS that will be used for
production code and RELAXED_FRAME_LIMIT_CFLAGS for tests.
Raising the limit for tests allows building them with clang
with optimizations disabled.
qemu requires that the topology equals to the maximum vcpu count.
Document this along with the API to set maximum vcpu count and the XML
element.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1426220
https://bugzilla.redhat.com/show_bug.cgi?id=1398087
Clean up the virsh man page description for --pool-create-as in order
to better describe how the various arguments are used when creating
(or defining) a logical pool.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1398087
Clean up the virsh man page description for --pool-create-as in order
to better describe how the various arguments are used when creating
(or defining) a logical pool.
Also modify the storage pool XML parsing algorithm to check for the
mismatched "name" and "source-name".
Move the --print-xml to the end of the qualifiers since it's not
properly positionally situated for both --pool-create-as and --pool-define-as
and could be miscontrued as being the 3rd positional argument.
Management tools may want to check whether the threshold is still set if
they missed an event. Add the data to the bulk stats API where they can
also query the current backing size at the same time.
When using thin provisioning, management tools need to resize the disk
in certain cases. To avoid having them to poll disk usage introduce an
event which will be fired when a given offset of the storage is written
by the hypervisor. Together with the API which will be added later, it
will allow registering thresholds for given storage backing volumes and
this event will then notify management if the threshold is exceeded.
Add bhyve support to virt-host-validate(1). It checks for the
essential kernel modules to be available so that user can actually
start VMs, have networking and console access.
It uses the kldnext(2)/kldstat(2) routines to retrieve modules list.
As bhyve is only available on FreeBSD and these routines were available
long before bhyve appeared, not adding any specific configure checks
for that.
Also, update tools/Makefile.am to add
virt-host-validate-$driver.[hc] to the build only if the
appropriate driver is enabled.
In GCC 7 there is a new warning triggered when a switch
case has a conditional statement (eg if ... else...) and
some of the code paths fallthrough to the next switch
statement. e.g.
conf/domain_conf.c: In function 'virDomainChrEquals':
conf/domain_conf.c:14926:12: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (src->targetTypeAttr != tgt->targetTypeAttr)
^
conf/domain_conf.c:14928:5: note: here
case VIR_DOMAIN_CHR_DEVICE_TYPE_CONSOLE:
^~~~
conf/domain_conf.c: In function 'virDomainChrDefFormat':
conf/domain_conf.c:22143:12: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (def->targetTypeAttr) {
^
conf/domain_conf.c:22151:5: note: here
default:
^~~~~~~
GCC introduced a __attribute__((fallthrough)) to let you
indicate that this is intentionale behaviour rather than
a bug.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Alter the formatting of each line to not give the appearance of
one long run-on sentence and to be consistent between the various
elements of collected/displayed data. The formatting should fit
within the 80 character display. This removes the need for commas
at the end of each line.
After 7f1bdec5fa our nodedev driver is capable of
determining DRM devices (DRM stands for Direct Render Manager not
Digital rights management). There is still one bit missing
though: virConnectListAllNodeDevices() is capable of listing
either all devices or just those with specified capability. Well,
DRM capability is missing there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
All options started with underscores, but we switched them to dashes
later on, making the style consistent. The latest addition, however,
did not respect that, so let's change that as well. It is tempting to
just change the name instead of adding alias, especially since nobody
ever used it, which we know thanks to the fact that it didn't work.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Function vshCommandOptStringReq() returns -1 on error and 0 on
success. The code, however, used the 'group_name' variable only if it
returned 1 (never).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
As LIBVIRT_DEBUG=4 logs only error messages and there
are no levels above it, adjusting the description in
the man page accordingly.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
This commit is similar to commit 0977ada8.The virsh manpage
lists options --uuid and --name as mutually exclusive if
option --details is specified when actually the option
--details is mutually exclusive and can't go with options
--uuid and/or --name. This patch rewords the virsh manpage
to state the correct meaning.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
Added general definitions for vstorage pool backend including
the build options to add --with-storage-vstorage checking.
In order to use vstorage as a backend for a storage pool
vstorage tools (vstorage and vstorage-mount) need to be installed.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
The recent deprecation in glibc (commit b76e065991ec) means the
module will fail to build entirely:
nss/libvirt_nss.c: In function '_nss_libvirt_gethostbyname_r':
nss/libvirt_nss.c:363:13: error: RES_USE_INET6 is deprecated [-Werror]
int af = ((_res.options & RES_USE_INET6) ? AF_INET6 : AF_INET);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This resolver option was removed shortly after being introduced,
and application using it are already broken anyway.
This patch will allow --uuid and --name in one cmd.
The pool's UUID and name will be printed side by side.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
By default, pool-info will convert sizes to human friendly units.
This patch will introduce option [--bytes].
If specified, the raw sizes will be in the output.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1373711
Add support and documentation for the [NO_]OVERWRITE flags for the
logical backend.
Update virsh.pod with a description of the process for usage of
the flags and building of the pool's volume group.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than have the Disk code having to use PARTED to determine if
there's something on the device, let's use the virStorageBackendDeviceProbe.
and only fallback to the PARTED probing if the BLKID code isn't built in.
This will also provide a mechanism for the other current caller (File
System Backend) to utilize a PARTED parsing algorithm in the event that
BLKID isn't built in to at least see if *something* exists on the disk
before blindly trying to use. The PARTED error checking will not find
file system types, but if there is a partition table set on the device,
it will at least cause a failure.
Move virStorageBackendDiskValidLabel and virStorageBackendDiskFindLabel
to storage_backend and rename/rework the code to fit the new model.
Update the virsh.pod description to provide a more generic description
of the process since we could now use either blkid or parted to find
data on the target device.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1363586
Commit id '27758859' introduced the "NO_OVERWRITE" flag check for
file system backends; however, the implementation, documentation,
and algorithm was inconsistent. For the "flag" description for the
API the flag was described as "Do not overwrite existing pool";
however, within the storage backend code the flag is described
as "it probes to determine if filesystem already exists on the
target device, renurning an error if exists".
The code itself was implemented using the paradigm to set up the
superblock probe by creating a filter that would cause the code
to only search for the provided format type. If that type wasn't
found, then the algorithm would return success allowing the caller
to format the device. If the format type already existed on the
device, then the code would fail indicating that the a filesystem
of the same type existed on the device.
The result is that if someone had a file system of one type on the
device, it was possible to overwrite it if a different format type
was specified in updated XML effectively trashing whatever was on
the device already.
This patch alters what NO_OVERWRITE does for a file system backend
to be more realistic and consistent with what should be expected when
the caller requests to not overwrite the data on the disk.
Rather than filter results based on the expected format type, the
code will allow success/failure be determined solely on whether the
blkid_do_probe calls finds some known format on the device. This
adjustment also allows removal of the virStoragePoolProbeResult
enum that was under utilized.
If it does find a formatted file system different errors will be
generated indicating a file system of a specific type already exists
or a file system of some other type already exists.
In the original virsh support commit id 'ddcd5674', the description
for '--no-overwrite' within the 'pool-build' command help output
has an ambiguous "of this type" included in the short description.
Compared to the longer description within the "Build a given pool."
section of the virsh.pod file it's more apparent that the meaning
of this flag would cause failure if a probe of the target already
has a filesystem.
So this patch also modifies the short description to just be the
antecedent of the 'overwrite' flag, which matches the API description.
This patch also modifies the grammar in virsh.pod for no-overwrite
as well as reworking the paragraph formats to make it easier to read.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The virsh manpage lists "shutdown" and "dying" as two of the possible
domain states that could be listed in the output of the "virsh list"
command. However, a domain that is being shutdown will be listed as
"in shutdown", and the "dying" state doesn't even exist (and never
has, as far as I can tell from looking through git history - it was
shown in the original import of the virsh.pod file in 2006; there was
no VIR_DOMAIN_DYING state then, there wasn't one when those lines of
virsh.pod were tweaked in 2008, and there still isn't one
today. Apparently it was just something that sounded like a good idea
to someone at some time, but was never implemented...)
Resolves: https://bugzilla.redhat.com/1408778
This patch adds support and documentation for
a generalized hardware cache event called cache_l1d
perf event.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
The virsh manpage lists options --uuid and --name as
mutually exclusive along option --table when actually
the option --table is mutually exclusive and can't go
with options --uuid and/or --name. This patch rewords the
virsh manpage to state the correct meaning.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
When setting perf events, the enabled/disabled perf events are not
listed. Since we know which events were changed it's possible to
print out the values on successful set, such as :
virsh perf Domain --enable instructions --disable cache_misses
instructions : enabled
cache_misses : disabled
Created a helper to print the messages - use the vshPrintExtra to
adhere to the --quiet|-q option being set by some script. This will
cause the get code to print nothing, but will return success/failure.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
When changing the metadata via virDomainSetMetadata, we now
emit an event to notify the app of changes. This is useful
when co-ordinating different applications read/write of
custom metadata.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new qualifier '--physical' to the 'vol-info' command in order to
dispaly the physical size of the volume. The size can differ from the
allocation value depending on the volume file time. In particular, qcow2
volumes will have a physical value larger than allocation. This also occurs
for sparse files, although for those the capacity is the largest size;
whereas, for qcow2 capacity is the logical size.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Finally, now that all APIs have been introduced, wire them up to virt-admin
and introduce daemon-log-outputs and daemon-log-filters commands.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
1ec22be5 added code that detects the maximum cpu count according to
domain capabilities. The code fell back to the old command only if the
API was not supported. If the API fails for other reasons the command
would fail. There's no point in not trying the old API in such case.
https://bugzilla.redhat.com/show_bug.cgi?id=1402690
Some arguments in vshErrorHandler, vshReadlineCompletion and
cmdSelfTest functions are not used. Mark them as such.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If the 'nleases < 0' on return, then the subsequent call to
findLeaseInJSON will not produce the expected results (passed
in as a size_t, but nleases is a ssize_t). So check if the
returned value < 0 and if so, goto cleanup.
Found by Coverity as a NEGATIVE_RETURNS event
With current perf framework, this patch adds support and documentation
for the branch_instructions perf event.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
So far the NSS module looks up only hostnames as provided by
guests themselves. However, there are some cases where this is
not enough: e.g. when there's a fresh new guest being installed
(with some generic hostname) say from a live ISO image; or some
(older) systems don't advertise their hostname in DHCP
transactions at all.
In cases like that it would be helpful if we translate domain
name as seen by libvirt too so that users can:
# virsh start $dom && ssh $dom
In order to achieve that new libvirt-guest module is introduced,
while older libvirt module maintains its current behaviour (that
is translating guest provided names into IP addresses).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The part of the code that iterates over an array of JSON values
is going to be re-used. Instead of copying it over, move it to a
separate function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The part of the code that appends found IP address into a list is
going to be re-used. Instead of copying it over, move it to a
separate function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The name of the exported functions for an NSS module is quite
fixed, it is derived from the module name:
_nss_$module_$function
Since we will create another NSS module with very similar
implementation we might as well generate the function names at
the compile time.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have couple of functions that operate over NULL terminated
lits of strings. However, our naming sucks:
virStringJoin
virStringFreeList
virStringFreeListCount
virStringArrayHasString
virStringGetFirstWithPrefix
We can do better:
virStringListJoin
virStringListFree
virStringListFreeCount
virStringListHasString
virStringListGetFirstWithPrefix
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It is already discussed in "[RFC] daemon: remove hardcode dep on libvirt-guests" [1].
Mgmt can use means to save/restore domains on system shutdown/boot other than
libvirt-guests.service. Thus we need to specify appropriate ordering dependency between
libvirtd, domains and save/restore service. This patch takes approach suggested
in RFC and introduces a systemd target, so that ordering can be built next way:
libvirtd -> domain -> virt-guest-shutdown.target -> save-restore.service.
This way domains are decoupled from specific shutdown service via intermediate
target.
[1] https://www.redhat.com/archives/libvir-list/2016-September/msg01353.html
Commit v1.3.3-181-gb028e9d7c implmented support for
VIR_MIGRATE_PARAM_PERSIST_XML migration parameter, but forgot to update
virsh.
https://bugzilla.redhat.com/show_bug.cgi?id=835300
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Although there already was an effort (b620bdee) to replace vshPrint occurrences
with vshPrintExtra due to '--quiet' flag, there were still some leftovers. So
this patch fixes them, hopefully for good.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1356881
Signed-off-by: Erik Skultety <eskultet@redhat.com>
There were a few places in our virsh* code where instead of calling vshError
on failure we called vshPrint.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
First, since commit 834c5720 the error reporting within the vshErrorHandler
doesn't work because there was a lot of renaming going on (dull mechanical
renaming without much thinking about it, yep - shame on me) and so the original
env variable VIRSH_DEBUG got renamed to VSH_DEBUG which we don't support nor
document anywhere. Second, by specifying this env variable, the last libvirt
error gets reported twice despite the fact we say the error reporting should be
deferred until the command finishes, and last but not least the vintage code's
logic is a bit 'odd', since the error would get reported iff the env variable
is set, even if the value should be equal to our DEFAULT value in which case it
doesn't make sense that we behave differently when an env variable is set to
some value and when there's no env variable at all but we use the same value
automatically as default.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Unlike the other error messages in vshInitDebug, this one relied on a hardcoded
name of a variable instead of using the prefix of the tool calling the init
routine.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1393854
Signed-off-by: Erik Skultety <eskultet@redhat.com>
After 06a7b1ff4 the @&opts_need_arg is not used anywhere. Well,
it is set but never read:
vsh.c: In function 'vshReadlineParse':
vsh.c:2658:14: warning: variable 'opts_need_arg' set but not used [-Wunused-but-set-variable]
uint64_t opts_need_arg, opts_seen;
^~~~~~~~~~~~~
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit id 'dcfdf341' passes 'opts_need_arg' and 'opts_seen' to
vshCmddefGetData, but that seems to be incorrect as those values
are not initialized properly (something at least one compiler found).
Instead the static 'const_opts_need_arg' and 'const_opts_seen' values
should be passed.
By passing unitialized values leads to not finding possible options
for simpler commands (domfsfreeze for example), where if you're in
a virsh shell using command line completion - you'll get a list of
files in your current directory instead of two options --domain and
--mountpoint (as would happen with this patch applied.
Correcting the error reporting method by using VSH_REQUIRE_OPTION
instead of virReportError
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
The 'on_shutdown' was the name in Xen, there was never such option in
libvirt's domain XML.
Reported-by: Ruben Kerkhof <ruben@rubenkerkhof.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since we're using autoconf to substitute the right value in
Makefile.am now, we can use a less generic name without running
into circular dependencies.
Adding $(prefix) in Makefile.am, as we were doing, means that
it would be prepended even when using --with-ws-plugindir,
which is something we don't want to happen.
Instead, we add it beforehand but take care that it doesn't
get expanded until make is called.
https://bugzilla.redhat.com/show_bug.cgi?id=1349898
Add the duration parameters to the virsh input/output for blkdeviotune
command and describe them in the pod file.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rework the repetitive lines to add iotune values into easier to read macros.
One to handle the SCALED values and one to handle the non scaled values.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Added description for new vcpu.<num>.halted statistics value.
While there, also added a description for vcpu.<num>.wait and
clarified the units displayed for time and wait.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
It is stated in the manual already, so let's mention the same thing in
the description to avoid causing problems.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If the VM is offline virsh attempted to at least report the pinning
information for the VM. This would not work properly now that the vcpus
can be sparse. Fix it by getting the vcpu states from the XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1375920
The fallback code used if virDomainGetVcpusFlags is not supported used
wrong XPath queries and basically did not work at all. Fix them to point
to the <domain> <vcpu> element instead of <vcpus> which was not present
until lately.
The Requires relationship is very strong, in that it prevents
a unit from running unless all the units it Requires are
running as well.
This turns out to be a problem because we want to be able to
restart libvirtd at any time without having libvirt-guests
suspend or shutdown running guests.
Turn the Requires relationship into a Wants relationship:
this way starting libvirt-guests will cause systemd to (attempt
to) start libvirtd as well, but stopping or restarting libvirtd
will not alter libvirt-guests' running state.
1. Move the declaration of const vshCmdDef *help - it should be at the
top of the "if" rather than in the middle.
2. Change a comparison from && to || - without doing so we could crash
on commands like 'virsh list' which would allow completion of some
non -- option based on whatever was found in the current working
directory and then as soon as that was completed, the next <tab>
would crash since "opt" would be returned as NULL, but the check
was dereferencing "&& opt->type"
3. Before dereferencing opt->completer, be sure opt isn't NULL.
With newer versions of libvirt Domain-0 is again visible in the list of
running guests but it should not be considered as a guest for shutdown
or suspend.
Signed-off-by Stefan Bader <stefan.bader@canonical.com>
The list file expects all guest UUIDs on the same line as the URI
which the guests run on. This does not happen when the list is
echo'ed in quotes. When stripping the quotes, newlines get transformed
into spaces. Without this, only the first guest on the list is actually
handled.
Based on a fix by Omar Siam <simar@gmx.net>
Bug-Ubuntu: http://bugs.launchpad.net/bugs/1591695
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
For one VM, it could had more than one graphical display.
Such as we coud add both vnc and spice display to a VM.
This patch introduces '--all' for showing all
possible graphical display of a active VM.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
GCC complained that
vsh.c: In function 'vshReadlineOptionsGenerator':
vsh.c:2622:29: warning: unused variable 'opt' [-Wunused-variable]
const vshCmdOptDef *opt = &cmd->opts[list_index];
^
vsh.c: In function 'vshReadlineParse':
vsh.c:2830:44: warning: 'opt' may be used uninitialized in this function
[-Wmaybe-uninitialized]
completed_list = opt->completer(autoCompleteOpaque,
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
For compatibility reasons virDomainSetVcpus needs to add vcpus as non
hotpluggable which means that the users will not be able to unplug it
after the VM has started. Add a flag that will allow to tell the API
that the unpluggable vcpus are okay.
The NSS module shouldn't rely on custom leases database to not have
entries for leases which have expired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1379895
Introduced by commit id '834c5720'.
During the code motion and creation of vsh.c, the function 'vshDeinit()'
in the (new) vsh.c was altered from whence it came in virsh.c such that
calling 'vshReadlineDeinit(ctl)' was conditional on "ctl->imode".
This causes a problem for the interactive running if the "quit" and "exit"
commands are used because 'cmdQuit' will clear ctl->imode, thus when the
interactive loop in main() of virsh.c exits because ctl->mode is clear and
virshDeinit is called which calls vshDeinit, the history file is now not
written. Conversely, if one had exited the interactive loop via pressing
<ctrl>D the file would be created because loop control is broken on EOF
and ctl->imode is not set to false.
This patch will remove the conditional call to vshReadlineDeinit and
restore the former behaviour.
Commit 6c504d6a added a note to the virsh man page about the
deprecation of 'cap' and 'weight' settings for the credit
scheduler. To this day, the default scheduler in Xen is credit
and it supports setting 'cap' and 'weight'. Remove the deprecation
notice from the note on the Xen credit scheduler.
Reported-by: Volo M. <vm@vovs.net>
Some CPU drivers (such as arm) do not provide list of CPUs libvirt
supports and just pass any CPU model from domain XML directly to QEMU.
Such driver need to return models == NULL and success from cpuGetModels.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Change the logic in a way, so that VSH_CMD_FLAG_ALIAS behaves similarly to
how VSH_OT_ALIAS for command options, i.e. there is no need for code duplication
for the alias and the aliased command structures. Along with that change,
switch any existing VSH_CMD_FLAG_ALIAS occurrences to this new format. Also,
since this patch introduces a new command structure element, adjust the
virsh-self-test test to make sure we won't ever miss to specify the '.alias'
member for an aliased command because doing that would lead to an internal
error.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The command is deprecated due to being grammatically incorrect, but for
backwards compatibility reasons cannot be removed. However, we should not
document such commands.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Recent changes extracted the command internals validation routine from
vshCmddefOptParse method which now just calls vshCmddefOptFill. Therefore, make
vshCmddefOptFill the new vshCmddefOptParse and drop the unnecessary name.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Originally introduced by commit 2432521e which correctly split
vshCmddefOptParse into command's options validation and options parsing.
However, command's 'internals' are not tied solely to .options, rather it
should be about the overall structure, therefore the validation should be
extracted from vshCmddefOptParse and performed only within our test suite, i.e.
in vshSelfTest.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
If the initial check is true the function immediately returns so there's no
need to enclose the code following the check within an 'else' block.
Also, by removing the 'else' block, the declarations need to be moved to
beginning of the function block to conform with our guidelines.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since it's used on a single place only, it can easily be replaced by the right
side of the original assignment.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The intention is to move vshCmddefCheckInternals out of vshCmddefOptParse to
our test suite. First step to do that is to enforce checking for an existing
help string (that also means it's non-empty) in a command because a command
without a help is not much of a use.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
virsh maxvcpus --type kvm output is useless on PPC. Also, in
commit e6806d79 we documented not rely on virConnectGetMaxVcpus
output. Fix the maxvcpus to use virConnectGetDomainCapabilities
now to make it useful. The call is made to use the default emulator
binary and to check for the host machine and arch which is what the
command intends to show anyway.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Just like we are running 'virsh self-test' from within our test
suite, we should run 'virt-admin self-test' too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This command should be exposed to other shells of ours.
They are gonna need it as soon as we want to test them too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When using
virsh net-event non-existing-net
the error message says that 'either --list or event type is required'
This is misleading as 'virsh net-event $valid-event-type' is not going
to work either. What is expected is 'virsh net-event --event
$valid-event-type'
This commit fixes the string in pool-event, nodedev-event, event, and
net-event.
This patch is to delete the extra wrap "\n" after failed vol-resize
error for both "Failed to change size of volume to" and "Failed to change
size of volume by". For error with wrap, there will be an extra wrap
between two errors, such as:
(1)# virsh vol-resize --pool default --vol vol-test 5M
error: Failed to change size of volume 'vol-test' to 5M
error: invalid argument: Can't shrink capacity below current capacity unless shrink flag explicitly specified
(2)# virsh vol-resize /var/lib/libvirt/images/volds --shrink --delta 10M
error: Failed to change size of volume 'volds' by 10M
error: invalid argument: can't shrink capacity below existing allocation
Unfortunately, commit a8962f70 only fixed first half of the reported issue of
virt-admin outputting negative values where unsigned int is expected by
BZ below, so this commit represents the other missing half of the fix.
resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1356769
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This patch changes the signature of vshCompleters, allowing to pass along
some data that we might want to along with the completers; for example,
we might want to pass the autocomplete vshControl along with the
completer, in case the completer requires a connection to libvirtd.
Signed-off-by: Nishith Shah <nishithshah.2211@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Having After=libvirtd.service merely ensures that, if both
services are asked to start, libvirtd.service will start
first.
What we really want is for libvirtd.service to be started
whenever libvirt-guests.service is asked to start. Adding a
Requires= relationship guarantees that will happen.
We use a separate line for each After= relationship in other
unit files: do the same here for consistency's sake, and also
to make future changes nicer to diff
libvirt-guests.service does both suspend *and* resume guests,
depending on whether it's being started or stopped: the
description should reflect this, to avoid confusing messages
during startup.
Replace "active" with "running" (to match virsh list's output)
and don't capitalize libvirt.
Call option completers if argument completion is requested using the
corresponding option completer, if it is defined.
Signed-off-by: Nishith Shah <nishithshah.2211@gmail.com>
With current perf framework, this patch adds support and documentation
for more perf events, including cache misses, cache references, cpu cycles,
and instructions.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
When we wanted to break huge and unmaintainable virsh into
smaller files first thing we did was to just move funcs into
virsh-.c files and then #include them from virsh. Having it done
this way we also needed to have them listed under EXTRA_DIST.
However, things got changed since then and now all the virsh-*.c
files are proper source files. Therefore they are listed under
virsh_SOURCES too. But for some reason we forgot to remove them
from EXTRA_DIST.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virVcpuInfo contains the vcpu number that the data refers to. Report
what's returned by the daemon rather than the sequence number as with
sparse vcpu topologies they won't match.
Use the full versions of the message, instead of composing a base
message with what was updated; the change makes the messages properly
translatable, since different parts of a sentence might need different
declensions for example.
Turn various vshPrint() informative messages into vshPrintExtra(), so
they are not printed when requesting the quiet mode; neither XML/info
outputs nor the results of commands are affected.
Also change the expected outputs of the virsh-undefine test, since virsh
is invoked in quiet mode there.
Some informative messages might still be converted (and thus silenced
when in quiet mode), but this is an improvements nonetheless.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1358179
This event is emitted when a nodedev XML definition is updated,
like when cdrom media is changed in a cdrom block device.
Also includes node device update event implementation for udev
backend, virsh nodedev-event support, and event-test support
https://bugzilla.redhat.com/show_bug.cgi?id=1366611
When commit id 'cb2e3e50' reworked the cmdSecretGetValue call to use
VIR_DISPOSE_STRING for base64, it neglected to initialize the base64
value to NULL since the cleanup: label could be reached prior to the
base64 value being set or not. This resulted in a core dump, adding
the initialization will avoid the issue.
After commit 9d479dd1 fiddled with the cmdConnect's output which used to be a
bit more verbose prior to the mentioned commit, the program flow would result
in a quite confusing error if an invalid URI has been provided:
error: Failed to connect to the admin server
Connected to the admin server
error: <some error>
The problem is that the commit mentioned above relied on the fact that
connect routine always succeeds which is not true.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In libvirt, snapshot means disk snapshot.
snapshot --live is more like VM checkpoint.
Make it clear in virsh.pod.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In our attempts to reconnect, we may create a polkit daemon.
However, it may happen that we would rewrite the variable that
already holds pointer to the agent.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1356937
Add the definitions to allow for viewing/setting cgroup period and quota
limits for IOThreads.
This is similar to the work done for emulator quota and period by
commit ids 'b65dafa' and 'e051c482'.
Being able to view/set the IOThread specific values is related to more
recent changes adding global period (commmit id '4d92d58f') and global
quota (commit id '55ecdae') definitions and qemu support (commit id
'4e17ff79' and 'fbcbd1b2'). With a global setting though, if somehow
the IOThread value in the cgroup hierarchy was set "outside of libvirt"
to a value that is incompatible with the global value.
Allowing control over IOThread specific values provides the capability
to alter the IOThread values as necessary.
The prettified JSON string already contains a newline so don't print
another one. This allows to pipe the json output (in conjunction with
the --quiet option) to files without having to truncate them afterwards.
Commit 0c56d94318 forgot to return false in the cmdConnect command
after the clean up made there.
Before (assuming you don't have uri alias for 'asdf'):
$ virsh connect asdf
error: failed to connect to the hypervisor
$ echo $?
0
After (with the same assumption):
$ virsh connect asdf
error: failed to connect to the hypervisor
error: no connection driver available for asdf
$ echo $?
1
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1356461
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The only function that we currently use from glib is g_sprintf().
That's a very big gun for such small target. Not only that, but
we've silently relied on wireshark dragging in the glib. Replace
the g_sprintf() with plain sprinf() so that we can drop the glib
dependency.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The original name 'admin_uri_default' was introduced to our code by commit
dbecb87f. However, at that time we already had a separate config file for
admin library but the commit mentioned above didn't properly adjust the
config's option name. The result is that when we're loading the config, we
check a non-existent config option (there's not much to do with the URIs
anyway, since we only allow local connection). Additionally, virt-admin's man
page documents, that the default URI can be altered by setting
admin_uri_default option. So the fix proposed by this patch leaves the
libvirt-admin.conf as is and adjusts the naming in the code as well as in the
virt-admin's man page.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In wireshark commit bbdd89b9 (contained in 2.1.0 release) they
have changed prototype of dissector function. Now it returns
number of bytes consumed by the dissector, and can get a pointer
to user specified data (which we don't use).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
