While LXC does not have the concept of VCPUS, so we can't do
per-VCPU pCPU placement, we can support the VM level CPU
placement. Todo this simply set the CPU affinity of the LXC
controller at startup. All child processes will inherit this
affinity.
* src/lxc/lxc_controller.c: Set process affinity
This partly reverts my previous patch f88de3eb. We need to
get file status after open, as given path could have been symlink,
so fstat() will operate on different file than lstat().
When aligning you need to clear the bits in the mask and leave the
others aside. Likely this code has never run, and will never run.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
One of my latest patches 2e37bf42d2
copy serial console definition. On domain shutdown we save this
info into state XML. However, later on the daemon start we simply
drop this info and since we are not re-reading qemu log,
vm->def->consoles[0] does not get populated with copy. Therefore
we need to avoid dropping console definition if it is just alias
for serial console.
If a connection to destination host is lost during peer-to-peer
migration (because keepalive protocol timed out), we won't be able to
finish the migration and it doesn't make sense to wait for qemu to
transmit all data. This patch automatically cancels such migration
without waiting for virDomainAbortJob to be called.
This API can be used to check if the socket associated with
virConnectPtr is still open or it was closed (probably because keepalive
protocol timed out). If there the connection is local (i.e., no socket
is associated with the connection, it is trivially always alive.
virConnectSetKeepAlive public API can be used by a client connecting to
remote server to start using keepalive protocol. The API is handled
directly by remote driver and not transmitted over the wire to the
server.
The keepalive program has two procedures: PING, and PONG.
Both are used only in asynchronous messages and the sender doesn't wait
for any reply. However, the party which receives PING messages is
supposed to react by sending PONG message the other party, but no
explicit binding between PING and PONG messages is made. For backward
compatibility neither server nor client are allowed to send keepalive
messages before checking that remote party supports them.
When virNetClientIOEventLoop is called for a non-blocking call and not
even a single byte can be sent from this call without blocking, we
properly reported that to the caller which properly frees the call. But
we never removed the call from a call queue.
If something fails while initializing qemu job object in
qemuDomainObjPrivateAlloc(), memory to the private pointer is freed, but
after that, the pointer is still dereferenced, which may result in a
segfault.
* qemuDomainObjPrivateAlloc() - Don't dereference NULL pointer.
Generally, functions which return malloc'd strings should be typed
as 'char *', not 'const char *', to make it obvious that the caller
is responsible to free things. free(const char *) fails to compile,
and although we have a cast embedded in VIR_FREE to work around poor
code that frees const char *, it's better to not rely on that hack.
* src/qemu/qemu_driver.c (qemuDiskPathToAlias): Change return type.
(qemuDomainBlockJobImpl): Update caller.
Given that we can now handle the target's disk shorthand, in addition
to an absolute path to the file or block device used on the host,
the term 'disk' fits a bit better as the parameter name than 'path'.
* include/libvirt/libvirt.h.in: Update some parameter names.
* src/libvirt.c (virDomainBlockStats, virDomainBlockStatsFlags)
(virDomainBlockPeek, virDomainGetBlockInfo, virDomainBlockJobAbort)
(virDomainGetBlockJobInfo, virDomainBlockJobSetSpeed)
(virDomainBlockPull): Likewise.
Commit 89b6284f made it possible to pass either a source name or
the target device to most API demanding a disk designation, but
forgot to update the documentation. It also failed to update
virDomainBlockStats to take both forms. This patch fixes both the
documentation and the remaining function.
Xen continues to use just device shorthand (that is, I did not
implement path lookup there, since xen does not track a domain_conf
to quickly tie a path back to the device shorthand).
* src/libvirt.c (virDomainBlockStats, virDomainBlockStatsFlags)
(virDomainGetBlockInfo, virDomainBlockPeek)
(virDomainBlockJobAbort, virDomainGetBlockJobInfo)
(virDomainBlockJobSetSpeed, virDomainBlockPull): Document
acceptable disk naming conventions.
* src/qemu/qemu_driver.c (qemuDomainBlockStats)
(qemuDomainBlockStatsFlags): Allow lookup by source name.
* src/test/test_driver.c (testDomainBlockStats): Likewise.
The WITH_VIRTUALPORT macro is defined to 0 when disabled, not
left undefined. So #if must be used instead of #ifdef
* src/util/virnetdevvportprofile.c: s/#ifdef/#if/
In preparation of DHCP Snooping and the detection of multiple IP
addresses per interface:
The hash table that is used to collect the detected IP address of an
interface can so far only handle one IP address per interface. With
this patch we extend this to allow it to handle a list of IP addresses.
Above changes the returned variable type of virNWFilterGetIpAddrForIfname()
from char * to virNWFilterVarValuePtr; adapt all existing functions calling
this function.
Signed-off-by: Eli Qiao <taget@linux.vnet.ibm.com>
When configuring a URI alias like this in 'libvirt.conf':
uri_aliases = [
"jj#j=qemu+ssh://root@127.0.0.1/system",
"sleet=qemu+ssh://root@sleet.cloud.example.com/system",
]
virsh -c jj#j
It will show this error message:
'no connection driver available for No connection for URI jj#j'
Actually，we expect this message below：
Malformed 'uri_aliases' config entry 'jj#j=qemu+ssh://root@127.0.0.1/system', aliases may only contain 'a-Z, 0-9, _, -'
Give this patch to fix this error.
This patch adds support for filtering of STP (spanning tree protocol) traffic
to the parser and makes us of the ebtables support for STP filtering. This code
now enables the filtering of traffic in chains with prefix 'stp'.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
With hunks borrowed from one of David Steven's previous patches, we now
add the capability of having a 'mac' chain which is useful to filter
for multiple valid MAC addresses.
Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
virStorageBackendLogicalDeleteVol() could not remove the lv with error
"could not remove open logical volume" sometimes. Generally it's caused
by the volume is still active, even if lvremove tries to remove it with
option "--force".
This patch is to fix it by disbale the lv first using "lvchange -aln"
and "lvremove -f" afterwards if the direct "lvremove -f" failed.
This patch exports KVM Host Power Management capabilities as XML so that
higher-level systems management software can make use of these features
available in the host.
The script "pm-is-supported" (from pm-utils package) is run to discover if
Suspend-to-RAM (S3) or Suspend-to-Disk (S4) is supported by the host.
If either of them are supported, then a new tag "<power_management>" is
introduced in the XML under the <host> tag.
However in case the query to check for power management features succeeded,
but the host does not support any such feature, then the XML will contain
an empty <power_management/> tag. In the event that the PM query itself
failed, the XML will not contain any "power_management" tag.
To use this, new APIs could be implemented in libvirt to exploit power
management features such as S3/S4.
None of the callers cared if str was updated to point to the next
byte after the parsed cpuset; simplifying this results in quite
a few code simplifications. Additionally, virCPUDefParseXML was
strdup()'ing a malloc()'d string; avoiding a memory copy resulted
in less code.
* src/conf/domain_conf.h (virDomainCpuSetParse): Alter signature.
* src/conf/domain_conf.c (virDomainCpuSetParse): Don't modify str.
(virDomainVcpuPinDefParseXML, virDomainDefParseXML): Adjust
callers.
* src/conf/cpu_conf.c (virCPUDefParseXML): Likewise.
* src/xen/xend_internal.c (sexpr_to_xend_topology): Likewise.
* src/xen/xm_internal.c (xenXMDomainPinVcpu): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxpr): Likewise.
* src/xenxs/xen_xm.c (xenParseXM): Likewise.
For direct attach devices, in qemuBuildCommandLine, we seem to be freeing
actual device on error path (with networkReleaseActualDevice). But the actual
device is not deleted.
qemuProcessStop eventually deletes the direct attach device and releases
actual device. But by the time qemuProcessStop is called qemuBuildCommandLine
has already freed actual device, leaving stray macvtap devices behind on error.
So the simplest fix is to remove the networkReleaseActualDevice in
qemuBuildCommandLine. This patch does just that.
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Now, when we support multiple consoles per domain,
the vm->def->console[0] can still remain an alias
for vm->def->serial[0]; However, we need to copy
it's source definition as well otherwise we'll regress
on virDomainOpenConsole.
Mingw32 complains if you request export of a symbol which does
not in fact exist.
* src/libvirt_bridge.syms, src/libvirt_macvtap.syms: Delete
obsolete files
* src/libvirt_private.syms: Remove virNetServerGetDBusConn
* src/libvirt_dbus.syms: Add virNetServerGetDBusConn
lvs outputs "[$lvname_vorigin]" for the virtual snapshot lv
(created with "--virtualsize"), and the original device pointed
by "$lvname_vorigin" is just for lvm internal use, one should
never use it.
Per lvm's nameing rules, "[" is not valid as part of the vg/lv name.
(man 8 lvm).
<quote>
VALID NAMES
The following characters are valid for VG and LV names: a-z A-Z 0-9 + _
. -
VG and LV names cannot begin with a hyphen. There are also various
reserved names that are used internally by lvm that can not be used as
LV or VG names. A VG cannot be called anything that exists in /dev/ at
the time of creation, nor can it be called '.' or '..'. A LV cannot be
called '.' '..' 'snapshot' or 'pvmove'. The LV name may also not con‐
tain the strings '_mlog' or '_mimage'
</quote>
So we can skip the set the lv's backingStore by checking if the name
begins with a "[".
This patch adds support for filtering of VLAN (802.1Q) traffic to the
parser and makes us of the ebtables support for VLAN filtering. This code
now enables the filtering of traffic in chains with prefix 'vlan'.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Xen4.1 initializes some unspecified sexpr config items to an empty
string, unlike previous Xen versions that would leave the item unset.
E.g. the kernel item for an HVM guest (non-direct kernel boot):
Xen4.0 and earlier
...
(image
(hvm
(kernel )
...
Xen4.1
...
(image
(hvm
(kernel '')
...
The empty string for kernel causes some grief in subsequent parsing
where existence of specified kernel is checked, e.g.
if (!def->os.kernel)
...
This patch solves the problem in sexpr_node_copy() by not copying
a node containing an empty string.
This prepares for subsequent patches which introduce dependence
on cgroup cpuset. Enable cgroup cpuset by default so users don't
have to modify configuration file before encountering a cpuset
error.
This patch modifies the NWFilter parameter parser to support multiple
elements with the same name and to internally build a list of items.
An example of the XML looks like this:
<parameter name='TEST' value='10.1.2.3'/>
<parameter name='TEST' value='10.2.3.4'/>
<parameter name='TEST' value='10.1.1.1'/>
The list of values is then stored in the newly introduced data type
virNWFilterVarValue.
The XML formatter is also adapted to print out all items in alphabetical
order sorted by 'name'.
This patch also fixes a bug in the XML schema on the way.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
This patch extends the NWFilter driver for Linux (ebiptables) to create
rules for each member of a previously introduced list. If for example
an attribute value (internally) looks like this:
IP = [10.0.0.1, 10.0.0.2, 10.0.0.3]
then 3 rules will be generated for a rule accessing the variable 'IP',
one for each member of the list. The effect of this is that this now
allows for filtering for multiple values in one field. This can then be
used to support for filtering/allowing of multiple IP addresses per
interface.
An iterator is introduced that extracts each member of a list and
puts it into a hash table which then is passed to the function creating
a rule. For the above example the iterator would cause 3 loops.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
NWFilters can be provided name-value pairs using the following
XML notation:
<filterref filter='xyz'>
<parameter name='PORT' value='80'/>
<parameter name='VAL' value='abc'/>
</filterref>
The internal representation currently is so that a name is stored as a
string and the value as well. This patch now addresses the value part of it
and introduces a data structure for storing a value either as a simple
value or as an array for later support of lists.
This patch adjusts all code that was handling the values in hash tables
and makes it use the new data type.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
The previous patch extends the priority of filtering rules into negative
numbers. We now use this possibility to interleave the jumping into
chains with filtering rules to for example create the 'root' table of
an interface with the following sequence of rules:
Bridge chain: libvirt-I-vnet0, entries: 6, policy: ACCEPT
-p IPv4 -j I-vnet0-ipv4
-p ARP -j I-vnet0-arp
-p ARP -j ACCEPT
-p 0x8035 -j I-vnet0-rarp
-p 0x835 -j ACCEPT
-j DROP
The '-p ARP -j ACCEPT' rule now appears between the jumps.
Since the 'arp' chain has been assigned priority -700 and the 'rarp'
chain -600, the above ordering can now be achieved with the following
rule:
<rule action='accept' direction='out' priority='-650'>
<mac protocolid='arp'/>
</rule>
This patch now sorts the commands generating the above shown jumps into
chains and interleaves their execution with those for generating rules.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
So far rules' priorities have only been valid in the range [0,1000].
Now I am extending their priority into the range [-1000, 1000] for subsequently
being able to sort rules and the access of (jumps into) chains following
priorities.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
This patch enables chains that have a known prefix in their name.
Known prefixes are: 'ipv4', 'ipv6', 'arp', 'rarp'. All prefixes
are also protocols that can be evaluated on the ebtables level.
Following the prefix they will be automatically connected to an interface's
'root' chain and jumped into following the protocol they evaluate, i.e.,
a table 'arp-xyz' will be accessed from the root table using
ebtables -t nat -A <iface root table> -p arp -j I-<ifname>-arp-xyz
thus generating a 'root' chain like this one here:
Bridge chain: libvirt-O-vnet0, entries: 5, policy: ACCEPT
-p IPv4 -j O-vnet0-ipv4
-p ARP -j O-vnet0-arp
-p 0x8035 -j O-vnet0-rarp
-p ARP -j O-vnet0-arp-xyz
-j DROP
where the chain 'arp-xyz' is accessed for filtering of ARP packets.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
This patch extends the filter XML to support priorities of chains
in the XML. An example would be:
<filter name='allow-arpxyz' chain='arp-xyz' priority='200'>
[...]
</filter>
The permitted values for priorities are [-1000, 1000].
By setting the priority of a chain the order in which it is accessed
from the interface root chain can be influenced.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Use the name of the chain rather than its type index (enum).
This pushes the later enablement of chains with user-given names
into the XML parser. For now we still only allow those names that
are well known ('root', 'arp', 'rarp', 'ipv4' and 'ipv6').
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Use scripts for the renaming and cleaning up of chains. This allows us to get
rid of some of the code that is only capable of renaming and removing chains
whose names are hardcoded.
A shell function 'collect_chains' is introduced that is given the name
of an ebtables chain and then recursively determines the names of all
chains that are accessed from this chain and its sub-chains using 'jumps'.
The resulting list of chain names is then used to delete all the found
chains by first flushing and then deleting them.
The same function is also used for renaming temporary filters to their final
names.
I tested this with the bash and dash as script interpreters.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Use the previously introduced chain priorities to sort the chains for access
from an interface's 'root' table and have them created in the proper order.
This gets rid of a lot of code that was previously creating the chains in a
more hardcoded way.
To determine what protocol a filter is used for evaluation do prefix-
matching, i.e., the filter 'arp' is used to filter for the 'arp' protocol,
'ipv4' for the 'ipv4' protocol and 'arp-xyz' will also be used to filter
for the 'arp' protocol following the prefix 'arp' in its name.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
For better handling of the sorting of chains introduce an internally used
priority. Use a lookup table to store the priorities. For now their actual
values do not matter just that the values cause the chains to be properly
sorted through changes in the following patches. However, the values are
chosen as negative so that once they are sorted along with filtering rules
(whose priority may only be positive for now) they will always be instantiated
before them (lower values cause instantiation before higher values). This
is done to maintain backwards compatibility.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Add a function to the virHashTable for getting an array of the hash table's
key-value pairs and have the keys (optionally) sorted.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Support creation of macvlan devices for LXC containers. Do not
allow setting of bandwidth controls or vport profiles due to the
complication that there is no host side visible device to work
with.
* src/lxc/lxc_driver.c: Support type=direct interfaces
Update virNetDevMacVLanCreateWithVPortProfile to allow creation
of plain macvlan devices, as well as macvtap devices. The former
is useful for LXC containers
* src/qemu/qemu_command.c: Explicitly request a macvtap device
* src/util/virnetdevmacvlan.c, src/util/virnetdevmacvlan.h: Add
new flag to allow switching between macvlan and macvtap
creation
The current lxcSetupInterfaces() method directly performs setup
of the bridge devices. Since it will shortly need to also create
macvlan devices, move the bridge related code into a separate
method
* src/lxc/lxc_driver.c: Split lxcSetupInterfaces() to create a
new lxcSetupInterfaceBridge()
The virDomainNetGetActualBridgeName and virDomainNetGetActualDirectDev
methods both return strings that point to data in the virDomainDefPtr
struct, and should therefore not be freed. The return values should
thus be 'const char *' not 'char *'.
* src/conf/domain_conf.c, src/conf/domain_conf.h: Mark const
* src/network/bridge_driver.c: Update to use a const char *
Move the ifaceMacvtapLinkDump and ifaceGetNthParent functions
into virnetdevvportprofile.c since they are specific to that
code. This avoids polluting the headers with the Linux specific
netlink data types
* src/util/interface.c, src/util/interface.h: Move
ifaceMacvtapLinkDump and ifaceGetNthParent functions and delete
remaining file
* src/util/virnetdevvportprofile.c: Add ifaceMacvtapLinkDump
and ifaceGetNthParent functions
* src/network/bridge_driver.c, src/nwfilter/nwfilter_gentech_driver.c,
src/nwfilter/nwfilter_learnipaddr.c, src/util/virnetdevmacvlan.c:
Remove include of interface.h
Rename ifaceIsVirtualFunction to virNetDevIsVirtualFunction,
ifaceGetVirtualFunctionIndex to virNetDevGetVirtualFunctionIndex
and ifaceGetPhysicalFunction to virNetDevGetPhysicalFunction
* src/util/interface.c, src/util/interface.h: Rename APIs
* src/util/virnetdevvportprofile.c: Update for API rename
Rename the ifaceCheck method to virNetDevValidateConfig and change
so that it always raises an error and returns -1 on error.
* src/util/interface.c, src/util/interface.h: Rename ifaceCheck
to virNetDevValidateConfig
* src/nwfilter/nwfilter_gentech_driver.c,
src/nwfilter/nwfilter_learnipaddr.c: Update for API rename
To match up with the existing virNetDevSetIPv4Address, rename
ifaceGetIPAddress to virNetDevGetIPv4Address
* util/interface.h, util/interface.c: Rename API
* network/bridge_driver.c: Update for API rename
Rename the ifaceGetIndex method to virNetDevGetIndex and
ifaceGetVlanID to virNetDevGetVLanID. Also change the error
reporting behaviour to always raise errors and return -1 on
failure
* util/interface.c, util/interface.h: Rename ifaceGetIndex
and ifaceGetVLAN
* nwfilter/nwfilter_gentech_driver.c, nwfilter/nwfilter_learnipaddr.c,
nwfilter/nwfilter_learnipaddr.c, util/virnetdevvportprofile.c: Update
for API renames and error handling changes
Move virNetDevReplaceMacAddress and virNetDevRestoreMacAddress
to the virnetdev.c file where they naturally belong
* util/interface.c, util/interface.h: Remove
virNetDevReplaceMacAddress and virNetDevRestoreMacAddress
* util/virnetdev.c, util/virnetdev.h: Add
virNetDevReplaceMacAddress and virNetDevRestoreMacAddress
Rename ifaceReplaceMacAddress to virNetDevReplaceMacAddress
and ifaceRestoreMacAddress to virNetDevRestoreMacAddress.
* util/interface.c, util/interface.h, util/virnetdevmacvlan.c:
Rename APIs
Move the low level macvlan creation APIs into the
virnetdevmacvlan.c file where they more naturally
belong
* util/interface.c, util/interface.h: Remove virNetDevMacVLanCreate
and virNetDevMacVLanDelete
* util/virnetdevmacvlan.c, util/virnetdevmacvlan.h: Add
virNetDevMacVLanCreate and virNetDevMacVLanDelete
Rename ifaceMacvtapLinkAdd to virNetDevMacVLanCreate and
ifaceLinkDel to virNetDevMacVLanDelete. Strictly speaking
the latter isn't restricted to macvlan devices, but that's
the only use libvirt has for it.
* util/interface.c, util/interface.h,
util/virnetdevmacvlan.c: Rename APIs
Rename virNetDevMacVLanCreate to virNetDevMacVLanCreateWithVPortProfile
and virNetDevMacVLanDelete to virNetDevMacVLanDeleteWithVPortProfile
To make way for renaming the other macvlan creation APIs in
interface.c
* util/virnetdevmacvlan.c, util/virnetdevmacvlan.h,
qemu/qemu_command.c, qemu/qemu_hotplug.c, qemu/qemu_process.c:
Rename APIs
Rename the macvtap.c file to virnetdevmacvlan.c to reflect its
functionality. Move the port profile association code out into
virnetdevvportprofile.c. Make the APIs available unconditionally
to callers
* src/util/macvtap.h: rename to src/util/virnetdevmacvlan.h,
* src/util/macvtap.c: rename to src/util/virnetdevmacvlan.c
* src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h:
Pull in vport association code
* src/Makefile.am, src/conf/domain_conf.h, src/qemu/qemu_conf.c,
src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update include
paths & remove conditional compilation
In preparation for code re-organization, rename the Macvtap
management APIs to have the following patterns
virNetDevMacVLanXXXXX - macvlan/macvtap interface management
virNetDevVPortProfileXXXX - virtual port profile management
* src/util/macvtap.c, src/util/macvtap.h: Rename APIs
* src/conf/domain_conf.c, src/network/bridge_driver.c,
src/qemu/qemu_command.c, src/qemu/qemu_command.h,
src/qemu/qemu_driver.c, src/qemu/qemu_hotplug.c,
src/qemu/qemu_migration.c, src/qemu/qemu_process.c,
src/qemu/qemu_process.h: Update for renamed APIs
Add routines to generate -numa QEMU command line option based on
<numa> ... </numa> XML specifications.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
This patch adds XML definitions for guest NUMA specification and contains
routines to parse the same. The guest NUMA specification looks like this:
<cpu>
...
<topology sockets='2' cores='4' threads='2'/>
<numa>
<cell cpus='0-7' memory='512000'/>
<cell cpus='8-15' memory='512000'/>
</numa>
...
</cpu>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
For whatever reason, the kernel allows you to create a regular
file named /dev/sdc.12345; although this file will disappear the
next time devtmpfs is remounted. If you let libvirt generate
the name of the external snapshot for a disk image originally
using the block device /dev/sdc, then the domain will be rendered
unbootable once the qcow2 file is lost on the next devtmpfs
remount. In this case, the user should have used 'virsh
snapshot-create --xmlfile' or 'virsh snapshot-create-as --diskspec'
to specify the name for the qcow2 file in a sane location, rather
than relying on libvirt generating a name that is most likely to
be wrong. We can help avoid naive mistakes by enforcing that
the user provide the external name for any backing file that is
not a regular file.
* src/conf/domain_conf.c (virDomainSnapshotAlignDisks): Only
generate names if backing file exists as regular file.
Reported by MATSUDA Daiki.
I missed adding virNetServerGetDBusConn() to libvirtd_private.syms
in commit b8adfcc6, which didn't cause a problem in 0.9.6 but
results in this build error in 0.9.7
libvirtd-remote.o: In function `remoteDispatchAuthPolkit':
remote.c:(.text+0x188dd): undefined reference to `virNetServerGetDBusConn'
Due to the asynchronous nature of streams, we might continue to
receive some stream packets from the server even after we have
shutdown the stream on the client side. These should be discarded
silently, rather than raising an error in the RPC layer.
* src/rpc/virnetclient.c: Discard stream data silently
Add a new virNetClientSendNonBlock which returns 2 on
full send, 1 on partial send, 0 on no send, -1 on error
If a partial send occurs, then a subsequent call to any
of the virNetClientSend* APIs will finish any outstanding
I/O.
TODO: the virNetClientEvent event handler could be used
to speed up completion of partial sends if an event loop
is present.
* src/rpc/virnetsocket.h, src/rpc/virnetsocket.c: Add new
virNetSocketHasPendingData() API to test for cached
data pending send.
* src/rpc/virnetclient.c, src/rpc/virnetclient.h: Add new
virNetClientSendNonBlock() API to send non-blocking API
Stop multiplexing virNetClientSend for two different purposes,
instead add virNetClientSendWithReply and virNetClientSendNoReply
* src/rpc/virnetclient.c, src/rpc/virnetclient.h: Replace
virNetClientSend with virNetClientSendWithReply and
virNetClientSendNoReply
* src/rpc/virnetclientprogram.c, src/rpc/virnetclientstream.c:
Update for new API names
Remove some duplication by pulling the code for passing the
buck out into a helper method
* src/rpc/virnetclient.c: Introduce virNetClientIOEventLoopPassTheBuck
Instead of inferring whether the buck is held from the waitDispatch
pointer, use an explicit 'bool haveTheBuck' field
* src/rpc/virnetclient.c: Explicitly track the buck
Directly messing around with the linked list is potentially
dangerous. Introduce some helper APIs to deal with list
manipulating the list
* src/rpc/virnetclient.c: Create linked list handlers
This improves the support for qemu rbd devices by adding support for a few
key features (e.g., authentication) and cleaning up the way in which
rbd configuration options are passed to qemu.
An <auth> member of the disk source xml specifies how librbd should
authenticate. The username attribute is the Ceph/RBD user to authenticate as.
The usage or uuid attributes specify which secret to use. Usage is an
arbitrary identifier local to libvirt.
The old RBD support relied on setting an environment variable to
communicate information to qemu/librbd. Instead, pass those options
explicitly to qemu. Update the qemu argument parsing and tests
accordingly.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Replacing the strchr call with two variables through a strstr call.
Calling strchr with two variables triggers a gcc 4.3/4.4
bug when used in combination with -Wlogical-op and at least -O1.
The ifaceSetMac and ifaceGetMac APIs duplicate the functionality
of the virNetDevSetMAC and virNetDevGetMAC APIs, but returning
errno's instead of raising errors.
* src/util/interface.c, src/util/interface.h: Remove
ifaceSetMac and ifaceGetMac APIs, adjusting callers
for new error behaviour
The ifaceUp, ifaceDown, ifaceCtrl & ifaceIsUp APIs can be replaced
with calls to virNetDevSetOnline and virNetDevIsOnline
* src/util/interface.c, src/util/interface.h: Delete ifaceUp,
ifaceDown, ifaceCtrl & ifaceIsUp
* src/nwfilter/nwfilter_gentech_driver.c, src/util/macvtap.c:
Update to use virNetDevSetOnline and virNetDevIsOnline
Move the virNetDevSetName and virNetDevSetNamespace APIs out
of LXC's veth.c and into virnetdev.c.
Move the remaining content of the file to src/util/virnetdevveth.c
* src/lxc/veth.c: Rename to src/util/virnetdevveth.c
* src/lxc/veth.h: Rename to src/util/virnetdevveth.h
* src/util/virnetdev.c, src/util/virnetdev.h: Add
virNetDevSetName and virNetDevSetNamespace
* src/lxc/lxc_container.c, src/lxc/lxc_controller.c,
src/lxc/lxc_driver.c: Update include paths
The src/lxc/veth.c file contains APIs for managing veth devices,
but some of the APIs duplicate stuff from src/util/virnetdev.h.
Delete thed duplicate APIs and rename the remaining ones to
follow virNetDevVethXXXX
* src/lxc/veth.c, src/lxc/veth.h: Rename APIs & delete duplicates
* src/lxc/lxc_container.c, src/lxc/lxc_controller.c,
src/lxc/lxc_driver.c: Update for API renaming
The src/util/network.c file is a dumping ground for many different
APIs. Split it up into 5 pieces, along functional lines
- src/util/virnetdevbandwidth.c: virNetDevBandwidth type & helper APIs
- src/util/virnetdevvportprofile.c: virNetDevVPortProfile type & helper APIs
- src/util/virsocketaddr.c: virSocketAddr and APIs
- src/conf/netdev_bandwidth_conf.c: XML parsing / formatting
for virNetDevBandwidth
- src/conf/netdev_vport_profile_conf.c: XML parsing / formatting
for virNetDevVPortProfile
* src/util/network.c, src/util/network.h: Split into 5 pieces
* src/conf/netdev_bandwidth_conf.c, src/conf/netdev_bandwidth_conf.h,
src/conf/netdev_vport_profile_conf.c, src/conf/netdev_vport_profile_conf.h,
src/util/virnetdevbandwidth.c, src/util/virnetdevbandwidth.h,
src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h,
src/util/virsocketaddr.c, src/util/virsocketaddr.h: New pieces
* daemon/libvirtd.h, daemon/remote.c, src/conf/domain_conf.c,
src/conf/domain_conf.h, src/conf/network_conf.c,
src/conf/network_conf.h, src/conf/nwfilter_conf.h,
src/esx/esx_util.h, src/network/bridge_driver.c,
src/qemu/qemu_conf.c, src/rpc/virnetsocket.c,
src/rpc/virnetsocket.h, src/util/dnsmasq.h, src/util/interface.h,
src/util/iptables.h, src/util/macvtap.c, src/util/macvtap.h,
src/util/virnetdev.h, src/util/virnetdevtap.c,
tools/virsh.c: Update include files
The virtual port profile parsing/formatting APIs do not
correctly handle unknown profile type strings/numbers.
They behave as a no-op, instead of raising an error
* src/util/network.c, src/util/network.h: Fix error
handling of port profile APIs
* src/conf/domain_conf.c, src/conf/network_conf.c: Update
for API changes
Rename the virVirtualPortProfileParams struct to be
virNetDevVPortProfile, and rename the APIs to match
this prefix.
* src/util/network.c, src/util/network.h: Rename port profile
APIs
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/conf/network_conf.c, src/conf/network_conf.h,
src/network/bridge_driver.c, src/qemu/qemu_hotplug.c,
src/util/macvtap.c, src/util/macvtap.h: Update for
renamed APIs/structs
Hi
Commit c31d23a787 removed the "conn"
parameter from qemuPhysIfaceConnect(), but it's still used if
WITH_MACVTAP is false. Also, it's still mentioned in the comment
above the function:
/**
* qemuPhysIfaceConnect:
* @def: the definition of the VM (needed by 802.1Qbh and audit)
* @conn: pointer to virConnect object
* @driver: pointer to the qemud_driver
* @net: pointer to he VM's interface description with direct device type
* @qemuCaps: flags for qemu
*
* Returns a filedescriptor on success or -1 in case of error.
*/
int
qemuPhysIfaceConnect(virDomainDefPtr def,
struct qemud_driver *driver,
virDomainNetDefPtr net,
virBitmapPtr qemuCaps,
enum virVMOperationType vmop)
{
int rc;
#if WITH_MACVTAP
[...]
#else
(void)def;
(void)conn;
(void)net;
(void)qemuCaps;
(void)driver;
(void)vmop;
qemuReportError(VIR_ERR_INTERNAL_ERROR,
"%s", _("No support for macvtap device"));
rc = -1;
#endif
return rc;
}
--
Michael Wood <esiotrot@gmail.com>
From f4fc43b4111a4c099395c55902e497b8965e2b53 Mon Sep 17 00:00:00 2001
From: Michael Wood <esiotrot@gmail.com>
Date: Sat, 12 Nov 2011 13:37:53 +0200
Subject: [PATCH] Fix build without MACVTAP.
which would blow away all volumes. Honor VIR_STORAGE_POOL_BUILD_OVERWRITE
to force a rebuild.
This was caught by libvirt-tck's storage/110-disk-pool.t.
Qemu will be the first driver to make use of a typed string in the
next round of additions. Separate out the trivial addition.
* src/qemu/qemu_driver.c (qemudSupportsFeature): Advertise feature.
(qemuDomainGetBlkioParameters, qemuDomainGetMemoryParameters)
(qemuGetSchedulerParametersFlags, qemudDomainBlockStatsFlags):
Allow typed strings flag where trivially supported.
Send and receive string typed parameters across RPC. This also
completes the back-compat mentioned in the previous patch - the
only time we have an older client talking to a newer server is
if RPC is in use, so filtering out strings during RPC prevents
returning an unknown type to the older client.
* src/remote/remote_protocol.x (remote_typed_param_value): Add
another union value.
* daemon/remote.c (remoteDeserializeTypedParameters): Handle
strings on rpc.
(remoteSerializeTypedParameters): Likewise; plus filter out
strings when replying to older clients. Adjust callers.
* src/remote/remote_driver.c (remoteFreeTypedParameters)
(remoteSerializeTypedParameters)
(remoteDeserializeTypedParameters): Handle strings on rpc.
* src/rpc/gendispatch.pl: Properly clean up typed arrays.
* src/remote_protocol-structs: Update.
Based on an initial patch by Hu Tao, with feedback from
Daniel P. Berrange.
Signed-off-by: Eric Blake <eblake@redhat.com>
This allows strings to be transported between client and server
in the context of name-type-value virTypedParameter functions.
For compatibility,
o new clients will not send strings to old servers, based on
a feature check
o new servers will not send strings to old clients without the
flag VIR_TYPED_PARAM_STRING_OKAY; this will be enforced at
the RPC layer in the next patch, so that drivers need not
worry about it in general. The one exception is that
virDomainGetSchedulerParameters lacks a flags argument, so
it must not return a string; drivers that forward that
function on to virDomainGetSchedulerParametersFlags will
have to pay attention to the flag.
o the flag VIR_TYPED_PARAM_STRING_OKAY is set automatically,
based on a feature check (so far, no driver implements it),
so clients do not have to worry about it
Future patches can then enable the feature on a per-driver basis.
This patch also ensures that drivers can blindly strdup() field
names (previously, a malicious client could stuff 80 non-NUL bytes
into field and cause a read overrun).
* src/libvirt_internal.h (VIR_DRV_FEATURE_TYPED_PARAM_STRING): New
driver feature.
* src/libvirt.c (virTypedParameterValidateSet)
(virTypedParameterSanitizeGet): New helper functions.
(virDomainSetMemoryParameters, virDomainSetBlkioParameters)
(virDomainSetSchedulerParameters)
(virDomainSetSchedulerParametersFlags)
(virDomainGetMemoryParameters, virDomainGetBlkioParameters)
(virDomainGetSchedulerParameters)
(virDomainGetSchedulerParametersFlags, virDomainBlockStatsFlags):
Use them.
* src/util/util.h (virTypedParameterArrayClear): New helper
function.
* src/util/util.c (virTypedParameterArrayClear): Implement it.
* src/libvirt_private.syms (util.h): Export it.
Based on an initial patch by Hu Tao, with feedback from
Daniel P. Berrange.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add virnetdev.h,virnetdevbridge.h,virnetdevtap.h to private symbols,
since debian linker no longer allows transitive link resolution
Signed-off-by: Eli Qiao <taget@linux.vnet.ibm.com>
This reverts commit ef1065cf5ac; see also this bug report:
https://bugzilla.redhat.com/show_bug.cgi?id=751900
In qemu 0.15.1 and earlier, during migration to file, the
qemu_savevm_state_begin and qemu_savevm_state_iterate methods
will both process as much migration data as possible until either
1. The file descriptor returns EAGAIN
2. The bandwidth rate limit is reached
If we set the rate limit to ULONG_MAX, test 2 never becomes true. We're
passing a plain file descriptor to QEMU and POSIX does not support EAGAIN on
regular files / block devices, so test 1 never becomes true either.
In the 'virsh save --bypass-cache' case, we pass a pipe instead of a
regular fd, but using a pipe adds I/O overhead, so always passing a
pipe just so qemu can see EAGAIN doesn't seem nice.
The ultimate fix needs to come from qemu - background migration must
respect asynchronous abort requests, or else periodically return
control to the main handling loop without an EAGAIN and without
waiting to hit an insanely large amount of data. But until a
version of qemu is fixed to support "unlimited" data rates while
still allowing cancellation, the best we can do is avoid the
automatic use of unlimited rates from within libvirt (users can
still explicitly change the migration rates, if they are aware that
they are giving up the ability to cancel a job).
Reverting the lone use of QEMU_DOMAIN_FILE_MIG_BANDWIDTH_MAX is
the simplest patch; this slows migration back down to a default
32M/sec cap, but also ensures that the main qemu processing loop
will still be responsive to cancellation requests. Hopefully
upstream qemu will provide us a means of safely using unlimited
speed, including a runtime probe of that capability.
* src/qemu/qemu_migration.c (qemuMigrationToFile): Revert attempt
to use unlimited migration bandwidth when migrating to file.
Signed-off-by: Daniel Veillard <veillard@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
steps to reproduce:
1. having a network xml file(named default.xml) like this one:
<network>
<name>default</name>
<uuid>c5322c4c-81d0-4985-a363-ad6389780d89</uuid>
<bridge name="virbr0" />
<forward/>
<ip address="192.168.122.1" netmask="255.255.255.0">
<dhcp>
<range start="192.168.122.2" end="192.168.122.254" />
</dhcp>
</ip>
</network>
in /etc/libvirt/qemu/networks/, and mark it as autostart:
$ ls -l /etc/libvirt/qemu/networks/autostart
total 0
lrwxrwxrwx 1 root root 14 Oct 12 14:02 default.xml -> ../default.xml
2. start libvirtd and the device virbr0 is not automatically up.
The reason is that the function virNetDevExists is now returns 1 if
the device exists, comparing to the former one returns 0 if the device
exists. But with only this fix will cause a segmentation fault(the same
steps as above) that is fixed by the second chunk of code.
CC libvirt_driver_xenapi_la-xenapi_driver.lo
xenapi/xenapi_driver.c: In function 'xenapiDomainGetVcpus':
xenapi/xenapi_driver.c:1209:21: error: variable 'cpus' set but not used [-Werror=unused-but-set-variable]
* src/xenapi/xenapi_driver.c (xenapiDomainGetVcpus): Silence
compiler warning.
It's not worth even worrying about a temporary file, unless we
ever expect the script to exceed maximum command-line argument
length limits.
* src/nwfilter/nwfilter_ebiptables_driver.c (ebiptablesExecCLI):
Run the commands as an argument to /bin/sh, rather than worrying
about a temporary file.
(ebiptablesWriteToTempFile): Delete unused function.
If /tmp is mounted with the noexec flag (common on security-conscious
systems), then nwfilter will fail to initialize, because we cannot
run any temporary script via virRun("/tmp/script"); but we _can_
use "/bin/sh /tmp/script". For that matter, using /tmp risks collisions
with other unrelated programs; we already have /var/run/libvirt as a
dedicated temporary directory for use by libvirt.
* src/nwfilter/nwfilter_ebiptables_driver.c
(ebiptablesWriteToTempFile): Use internal directory, not /tmp;
drop attempts to make script executable; and detect close error.
(ebiptablesExecCLI): Switch to virCommand, and invoke the shell to
read the script, rather than requiring an executable script.
The socket address APIs in src/util/network.h either take the
form virSocketAddrXXX, virSocketXXX or virSocketXXXAddr.
Sanitize this so everything is virSocketAddrXXXX, and ensure
that the virSocketAddr parameter is always the first one.
* src/util/network.c, src/util/network.h: Santize socket
address API naming
* src/conf/domain_conf.c, src/conf/network_conf.c,
src/conf/nwfilter_conf.c, src/network/bridge_driver.c,
src/nwfilter/nwfilter_ebiptables_driver.c,
src/nwfilter/nwfilter_learnipaddr.c,
src/qemu/qemu_command.c, src/rpc/virnetsocket.c,
src/util/dnsmasq.c, src/util/iptables.c,
src/util/virnetdev.c, src/vbox/vbox_tmpl.c: Update for
API renaming
Following the renaming of the bridge management APIs, we can now
split the source file into 3 corresponding pieces
* src/util/virnetdev.c: APIs for any type of network interface
* src/util/virnetdevbridge.c: APIs for bridge interfaces
* src/util/virnetdevtap.c: APIs for TAP interfaces
* src/util/virnetdev.c, src/util/virnetdev.h,
src/util/virnetdevbridge.c, src/util/virnetdevbridge.h,
src/util/virnetdevtap.c, src/util/virnetdevtap.h: Copied
from bridge.{c,h}
* src/util/bridge.c, src/util/bridge.h: Split into 3 pieces
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
src/openvz/openvz_driver.c, src/qemu/qemu_command.c,
src/qemu/qemu_conf.h, src/uml/uml_conf.c, src/uml/uml_conf.h,
src/uml/uml_driver.c: Update #include directives
Convert the virNetDevBridgeSetSTP and virNetDevBridgeSetSTPDelay
to use ioctls instead of spawning brctl.
Implement the virNetDevBridgeGetSTP and virNetDevBridgeGetSTPDelay
methods which were declared in the header but never existed
* src/util/bridge.c: Convert to use bridge ioctls instead of brctl
The MTU management APIs are useful to other code inside libvirt,
so should be exposed as non-static APIs.
* src/util/bridge.c, src/util/bridge.h: Expose virNetDevSetMTU,
virNetDevSetMTUFromDevice & virNetDevGetMTU
The existing brXXX APIs in src/util/bridge.h are renamed to
follow one of three different conventions
- virNetDevXXX - operations for any type of interface
- virNetDevBridgeXXX - operations for bridge interfaces
- virNetDevTapXXX - operations for tap interfaces
* src/util/bridge.h, src/util/bridge.c: Rename all APIs
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
src/qemu/qemu_command.c, src/uml/uml_conf.c,
src/uml/uml_driver.c: Update for API renaming
Currently every caller of the brXXX APIs has to store the returned
errno value and then raise an error message. This results in
inconsistent error messages across drivers, additional burden on
the callers and makes the error reporting inaccurate since it is
hard to distinguish different scenarios from 1 errno value.
* src/util/bridge.c: Raise errors instead of returning errnos
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
src/qemu/qemu_command.c, src/uml/uml_conf.c,
src/uml/uml_driver.c: Remove error reporting code
The bridge management APIs in src/util/bridge.c require a brControl
object to be passed around. This holds the file descriptor for the
control socket. This extra object complicates use of the API for
only a minor efficiency gain, which is in turn entirely offset by
the need to fork/exec the brctl command for STP configuration.
This patch removes the 'brControl' object entirely, instead opening
the control socket & closing it again within the scope of each method.
The parameter names for the APIs are also made to consistently use
'brname' for bridge device name, and 'ifname' for an interface
device name. Finally annotations are added for non-NULL parameters
and return check validation
* src/util/bridge.c, src/util/bridge.h: Remove brControl object
and update API parameter names & annotations.
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
src/uml/uml_conf.h, src/uml/uml_conf.c, src/uml/uml_driver.c,
src/qemu/qemu_command.c, src/qemu/qemu_conf.h,
src/qemu/qemu_driver.c: Remove reference to 'brControl' object
MacOS lacks ptsname_r, and gnulib doesn't (yet) provide it.
But we can avoid it altogether, by using gnulib openpty()
instead. Note that we do _not_ want the pt_chown module;
gnulib uses it only to implement a replacement openpty() if
the system lacks both openpty() and granpt(), but all
systems that we currently port to either have at least one of
openpty() and/or grantpt(), or lack ptys altogether. That is,
we aren't porting to any system that requires us to deal with
the hassle of installing a setuid pt_chown helper just to use
gnulib's ability to provide openpty() on obscure platforms.
* .gnulib: Update to latest, for openpty fixes
* bootstrap.conf (gnulib_modules): Add openpty, ttyname_r.
(gnulib_tool_option_extras): Exclude pt_chown module.
* src/util/util.c (virFileOpenTty): Rewrite in terms of openpty
and ttyname_r.
* src/util/util.h (virFileOpenTtyAt): Delete dead prototype.
Every instance of virCapsPtr must have the defaultConsoleTargetType
field set.
* src/security/virt-aa-helper.c: Add defaultConsoleTargetType to
virCapsPtr
The code calling sendfd/recvfd was mistakenly assuming those
calls would never block. They can in fact return EAGAIN and
this is causing us to drop the client connection when blocking
ocurrs while sending/receiving FDs.
Fixing this is a little hairy on the incoming side, since at
the point where we see the EAGAIN, we already thought we had
finished receiving all data for the packet. So we play a little
trick to reset bufferOffset again and go back into polling for
more data.
* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Update
virNetSocketSendFD/RecvFD to return 0 on EAGAIN, or 1
on success
* src/rpc/virnetclient.c: Move decoding of header & fds
out of virNetClientCallDispatch and into virNetClientIOHandleInput.
Handling blocking when sending/receiving FDs
* src/rpc/virnetmessage.h: Add a 'donefds' field to track
how many FDs we've sent / received
* src/rpc/virnetserverclient.c: Handling blocking when
sending/receiving FDs
Building on 64-bit FreeBSD 8.2 complained about a cast between
a pointer and a smaller integer. Going through an intermediate
cast shuts up the compiler.
* src/util/threads-pthread.c (virThreadSelfID): Silence a warning.
While building on FreeBSD (and after fixing a ptsname_r link error),
I got this failure:
./.libs/libvirt_util.a(libvirt_util_la-threads.o)(.text+0x240): In function `virThreadCreate':
util/threads-pthread.c:185: undefined reference to `pthread_create'
It turns out that gnulib used only pthread_join for LIB_PTHREAD,
but on FreeBSD, libc provides that (as a stub function); whereas
the more complex pthread_create really does require -pthread,
which gnulib tracked under [LT]LIBMULTITHREAD.
* configure.ac (LIBS): Check LIBMULTITHREAD alongside LIB_PTHREAD.
* src/Makefile.am (THREAD_LIBS): New variable.
(libvirt_util_la_LIBADD, libvirt_lxc_LDADD): Use it.
I got this weird failure:
error: Failed to start domain simple
error: internal error cannot mix caller fds with blocking execution
and tracked it down to a use-after-free - virCommandSetOutputFD
was storing the address of a stack-local variable, which then
went out of scope before the virCommandRun that dereferenced it.
Bug introduced in commit 451cfd05 (0.9.2).
* src/lxc/lxc_driver.c (lxcBuildControllerCmd): Move log fd
registration...
(lxcVmStart): ...to caller.
All constants related to events should have a prefix of
VIR_DOMAIN_EVENT_
* include/libvirt/libvirt.h.in, src/qemu/qemu_domain.c:
Rename VIR_DOMAIN_DISK_CHANGE_MISSING_ON_START to
VIR_DOMAIN_EVENT_DISK_CHANGE_MISSING_ON_START
I ran into the following build failure:
$ mkdir -p build1 build2/a/very/deep/hierarcy
$ cd build2/a/very/deep/hierarcy
$ ../../../../../configure && make
$ cd ../../../../build1
$ ../configure && make
...
../../src/remote/remote_protocol.c:7:55: fatal error: ../../../../../src/remote/remote_protocol.h: No such file or directory
Turns out that we were sometimes generating the remote_protocol.c
file with information from the VPATH build, which is bad, since
any file shipped in the tarball should be idempotent no matter how
deep the VPATH build tree that created it.
* src/rpc/genprotocol.pl: Don't embed VPATH into generated file.
Based on a Coverity report - the return value of waitpid() should
always be checked, to avoid problems with leaking resources.
* src/lxc/lxc_controller.c (lxcControllerRun): Use simpler virPidAbort.
The default console type may vary based on the OS type. ie a Xen
paravirt guests wants a 'xen' console, while a fullvirt guests
wants a 'serial' console.
A plain integer default console type in the capabilities does
not suffice. Instead introduce a callback that is passed the
OS type.
* src/conf/capabilities.h: Use a callback for default console
type
* src/conf/domain_conf.c, src/conf/domain_conf.h: Use callback
for default console type. Add missing LXC/OpenVZ console types.
* src/esx/esx_driver.c, src/libxl/libxl_conf.c,
src/lxc/lxc_conf.c, src/openvz/openvz_conf.c,
src/phyp/phyp_driver.c, src/qemu/qemu_capabilities.c,
src/uml/uml_conf.c, src/vbox/vbox_tmpl.c,
src/vmware/vmware_conf.c, src/xen/xen_hypervisor.c,
src/xenapi/xenapi_driver.c: Set default console type callback
To allow virDomainOpenConsole to access non-primary consoles,
device aliases are required to be set. Until now only the QEMU
driver has done this. Update LXC & UML to set aliases for any
console devices
* src/lxc/lxc_driver.c, src/uml/uml_driver.c: Set aliases
for console devices
When no <target> element was set at all, the default console
target type was not being honoured
* src/conf/domain_conf.c: Set default target type for consoles
with no <target>
Currently the LXC controller only supports setup of a single
text console. This is wired up to the container init's stdio,
as well as /dev/console and /dev/tty1. Extending support for
multiple consoles, means wiring up additional PTYs to /dev/tty2,
/dev/tty3, etc, etc. The LXC controller is passed multiple open
file handles, one for each console requested.
* src/lxc/lxc_container.c, src/lxc/lxc_container.h: Wire up
all the /dev/ttyN links required to symlink to /dev/pts/NN
* src/lxc/lxc_container.h: Open more container side /dev/pts/NN
devices, and adapt event loop to handle I/O from all consoles
* src/lxc/lxc_driver.c: Setup multiple host side PTYs
The current I/O code for LXC uses a hand crafted event loop
to forward I/O between the container & host app, based on
epoll to handle EOF on PTYs. This event loop is not easily
extensible to add more consoles, or monitor other types of
file descriptors.
Remove the custom event loop and replace it with a normal
libvirt event loop. When detecting EOF on a PTY, disable
the event watch on that FD, and fork off a background thread
that does a edge-triggered epoll() on the FD. When the FD
finally shows new incoming data, the thread re-enables the
watch on the FD and exits.
When getting EOF from a read() on the PTY, the existing code
would do waitpid(WNOHANG) to see if the container had exited.
Unfortunately there is a race condition, because even though
the process has closed its stdio handles, it might still
exist.
To deal with this the new event loop uses a SIG_CHILD handler
to perform the waitpid only when the container is known to
have actually exited.
* src/lxc/lxc_controller.c: Rewrite the event loop to use
the standard APIs.
qemuBuildVirtioSerialPortDevStr was mistakenly accessing the
target.name field in the virDomainChrDef object for chardevs
belonging to a console. Those chardevs only have port set,
and if there's > 1 console, the > 1port number results in
trying to access a target.name with address 0x1
* src/qemu/qemu_command.c: Fix target.name handling and
make code more robust wrt error reporting
* src/qemu/qemu_command.c: Conditionally access target.name
While Xen only has a single paravirt console, UML, and
QEMU both support multiple paravirt consoles. The LXC
driver can also be trivially made to support multiple
consoles. This patch extends the XML to allow multiple
<console> elements in the XML. It also makes the UML
and QEMU drivers support this config.
* src/conf/domain_conf.c, src/conf/domain_conf.h: Allow
multiple <console> devices
* src/lxc/lxc_driver.c, src/xen/xen_driver.c,
src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c: Update for
internal API changes
* src/security/security_selinux.c, src/security/virt-aa-helper.c:
Only label consoles that aren't a copy of the serial device
* src/qemu/qemu_command.c, src/qemu/qemu_driver.c,
src/qemu/qemu_process.c, src/uml/uml_conf.c,
src/uml/uml_driver.c: Support multiple console devices
* tests/qemuxml2xmltest.c, tests/qemuxml2argvtest.c: Extra
tests for multiple virtio consoles. Set QEMU_CAPS_CHARDEV
for all console /channel tests
* tests/qemuxml2argvdata/qemuxml2argv-channel-virtio-auto.args,
tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.args
tests/qemuxml2argvdata/qemuxml2argv-console-virtio.args: Update
for correct chardev syntax
* tests/qemuxml2argvdata/qemuxml2argv-console-virtio-many.args,
tests/qemuxml2argvdata/qemuxml2argv-console-virtio-many.xml: New
test file
Allow the user to call with nparams too small, per API documentation.
* src/xen/xen_hypervisor.c (xenHypervisorGetSchedulerParameters):
Allow fewer than max.
* src/xen/xend_internal.c (xenDaemonGetSchedulerParameters):
Likewise.
libvirt.c guarantees that nparams is non-zero for scheduler parameters.
* src/test/test_driver.c (testDomainGetSchedulerParamsFlags): Drop
redundant check. Avoid strcpy.
Allow the user to call with nparams too small, per API documentation.
Also, libvirt.c filters out nparams of 0 for scheduler parameters.
* src/lxc/lxc_driver.c (lxcDomainGetMemoryParameters): Allow fewer
than max.
(lxcGetSchedulerParametersFlags): Drop redundant check.
Allow the user to call with nparams too small, per API documentation.
* src/libxl/libxl_driver.c
(libxlDomainGetSchedulerParametersFlags): Allow fewer than max.
Allow the user to call with nparams too small, per API documentation.
* src/esx/esx_driver.c (esxDomainGetMemoryParameters): Drop
redundant check.
(esxDomainGetSchedulerParametersFlags): Allow fewer than max.
Document the parameter names that will be used by
virDomain{Get,Set}SchedulerParameters{,Flags}, rather than
hard-coding those names in each driver, to match what is
done with memory, blkio, and blockstats parameters.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_SCHEDULER_CPU_SHARES)
(VIR_DOMAIN_SCHEDULER_VCPU_PERIOD)
(VIR_DOMAIN_SCHEDULER_VCPU_QUOTA, VIR_DOMAIN_SCHEDULER_WEIGHT)
(VIR_DOMAIN_SCHEDULER_CAP, VIR_DOMAIN_SCHEDULER_RESERVATION)
(VIR_DOMAIN_SCHEDULER_LIMIT, VIR_DOMAIN_SCHEDULER_SHARES): New
field name macros.
* src/qemu/qemu_driver.c (qemuSetSchedulerParametersFlags)
(qemuGetSchedulerParametersFlags): Use new defines.
* src/test/test_driver.c (testDomainGetSchedulerParamsFlags)
(testDomainSetSchedulerParamsFlags): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorGetSchedulerParameters)
(xenHypervisorSetSchedulerParameters): Likewise.
* src/xen/xend_internal.c (xenDaemonGetSchedulerParameters)
(xenDaemonSetSchedulerParameters): Likewise.
* src/lxc/lxc_driver.c (lxcSetSchedulerParametersFlags)
(lxcGetSchedulerParametersFlags): Likewise.
* src/esx/esx_driver.c (esxDomainGetSchedulerParametersFlags)
(esxDomainSetSchedulerParametersFlags): Likewise.
* src/libxl/libxl_driver.c (libxlDomainGetSchedulerParametersFlags)
(libxlDomainSetSchedulerParametersFlags): Likewise.
The field 'mon' in 'struct tm' gives months 0-11, where as
humans tend to expect months 1-12. Thus the month number
needing adjusting by 1
* src/util/logging.c: Use human friendly month number
commit 27908453 introduces a regression, and it will
cause libvirt crashed when starting network.
The reason is that tapfd may be NULL, but we dereference
it without checking whether it is NULL.
Since all virTypedParameter APIs allow us to return the number
of slots we actually populated, we should allow the user to
call with nparams too small (without overrunning their array)
or too large (ignoring the tail of the array that we can't fill),
rather than requiring that they get things exactly right.
Making this change will make it easier for a future patch to
introduce VIR_TYPED_PARAM_STRING, with filtering in libvirt.c
rather than in every single driver, since users already have
to be prepared for *nparams to be smaller on exit than on entry.
* src/qemu/qemu_driver.c (qemuDomainGetBlkioParameters)
(qemuDomainGetMemoryParameters): Allow variable nparams on entry.
(qemuGetSchedulerParametersFlags): Drop redundant check.
(qemudDomainBlockStats, qemudDomainBlockStatsFlags): Rename...
(qemuDomainBlockStats, qemuDomainBlockStatsFlags): ...to this.
Don't return unavailable stats.
virDomainBlockStatsFlags was missing a check that was present in
virDomainGetMemoryParameters. Additionally, I found that the
existing descriptions were a bit hard to read. A later patch
will fix qemu to return fewer than max parameters if @nparams
was too small on input.
* src/libvirt.c (virDomainGetMemoryParameters)
(virDomainGetBlkioParameters, virDomainGetSchedulerParameters)
(virDomainGetSchedulerParametersFlags):
Tweak documentation wording.
(virDomainBlockStatsFlags): Likewise, and add sanity check.
If an LXC VM fails to start, quite a few cleanup paths will
result in the original error message being overwritten. Some
other cleanup paths also forgot to actually terminate the VM.
* src/lxc/lxc_driver.c: Ensure VM is terminated on startup
failure and preserve original error
The LXC code for mounting container filesystems from block devices
tries all filesystems in /etc/filesystems and possibly those in
/proc/filesystems. The regular mount binary, however, first tries
using libblkid to detect the format. Add support for doing the same
in libvirt, since Fedora's /etc/filesystems is missing many formats,
most notably ext4 which is the default filesystem Fedora uses!
* src/Makefile.am: Link libvirt_lxc to libblkid
* src/lxc/lxc_container.c: Probe filesystem format with libblkid
If we looped through /etc/filesystems trying to mount with each
type and failed all options, we forget to actually raise an
error message.
* src/lxc/lxc_container.c: Raise error if unable to detect
the filesystems. Also fix existing error message
The kernel automounter is mostly broken wrt to containers. Most
notably if you start a new filesystem namespace and then attempt
to unmount any autofs filesystem, it will typically fail with a
weird error message like
Failed to unmount '/.oldroot/sys/kernel/security':Too many levels of symbolic links
Attempting to detach the autofs mount using umount2(MNT_DETACH)
will also fail with the same error. Therefore if we get any error on
unmount()ing a filesystem from the old root FS when starting a
container, we must immediately break out and detach the entire
old root filesystem (ignoring any mounts below it).
This has the effect of making the old root filesystem inaccessible
to anything inside the container, but at the cost that the mounts
live on in the kernel until the container exits. Given that SystemD
uses autofs by default, we need LXC to be robust this scenario and
thus this tradeoff is worthwhile.
* src/lxc/lxc_container.c: Detach root filesystem if any umount
operation fails.
The /etc/filesystems file can contain a '*' on the last line to
indicate that /proc/filessystems should be tried next. We have
a check that this '*' only occurs on the last line. Unfortunately
when we then start reading /proc/filesystems, we mistakenly think
we've seen '*' in /proc/filesystems and fail
* src/lxc/lxc_container.c: Skip '*' validation when we're reading
/proc/filesystems
Only some of the return paths of lxcContainerWaitForContinue will
have set errno. In other paths we need to set it manually to avoid
the caller getting a random stale errno value
* src/lxc/lxc_container.c: Set errno in lxcContainerWaitForContinue
We already have a /var/lib/libvirt/images for OS install images.
We need a separate /var/lib/libvirt/filesystems for OS install
trees, since SELinux labelling will be different
* libvirt.spec.in: Add /var/lib/libvirt/filesystems
* src/Makefile.am: Create /var/lib/libvirt/filesystems
Allow the datacenter and compute resource parts of the path
to be prefixed with folders. Therefore, the way the path is
parsed has changed. Before, it was split in 2 or 3 items and
the items' meanings were determined by their positions. Now
the path can have 2 or more items and the the vCenter server
is asked whether a folder, datacenter of compute resource
with the specified name exists at the current hierarchy level.
Before the datacenter and compute resource lookup automatically
traversed folders during lookup. This is logic got removed
and folders have to be specified explicitly.
The proper datacenter path including folders is now used when
accessing a datastore over HTTPS. This makes virsh dumpxml
and define work for datacenters in folders.
https://bugzilla.redhat.com/show_bug.cgi?id=732676
with /etc/libvirt/libvirt.conf below:
uri_aliases = [
"hail=qemu:///system",
"sleet=qemu+ssh://root 9 115 122 57/system",
"sam=qemu+unix:///system?socket=/var/run/libvirt/libvirt-sock",
]
Neither "virsh -c hailly" nor "hai" should result in matching "hail=qemu:///system"
Fix URI alias prefix matching when connecting
Signed-off-by: Wen Ruo Lv <lvroyce@linux.vnet.ibm.com>
If daemon is using SASL it reads client data into a cache. This cache is
big (usually 65KB) and can thus contain 2 or more messages. However,
on socket event we can dispatch only one message. So if we read two
messages at once, the second will not be dispatched as the socket event
goes away with filling the cache.
Moreover, when dispatching the cache we need to remember to take care
of client max requests limit.
If we are comparing storage pools we must skip comparing with
ourself, so that re-defining an existing pool works
* conf/storage_conf.c: Skip self when comparing
The qemu RBD driver needs access to the conn in order to get the secret
needed for connecting to the ceph cluster.
Signed-off-by: Sage Weil <sage@newdream.net>
To support "managed" mode of host PCI device, we record the original
states (unbind_from_stub, remove_slot, and reprobe) so that could
reattach the device to host with original driver. But there is no XML
for theses attrs, and thus after daemon is restarted, we lose the
original states. It's easy to reproduce:
1) virsh start domain
2) virsh attach-device dom hostpci.xml (in 'managed' mode)
3) service libvirtd restart
4) virsh destroy domain
You will see the device won't be bound to the original driver
if there was one.
This patch is to solve the problem by introducing internal XML
(won't be dumped to user, only dumped to status XML). The XML is:
<origstates>
<unbind/>
<remove_slot/>
<reprobe/>
</origstates>
Which will be child node of <hostdev><source>...</souce></hostdev>.
(only for PCI device).
A new struct "virDomainHostdevOrigStates" is introduced for the XML,
and the according members are updated when preparing the PCI device.
And function "qemuUpdateActivePciHostdevs" is modified to honor
the original states. Use of qemuGetPciHostDeviceList is removed
in function "qemuUpdateActivePciHostdevs", and the "managed" value of
the device config is honored by the change. This fixes another problem
alongside:
qemuGetPciHostDeviceList set the device as "managed" force
regardless of whether the device is configured as "managed='yes'"
or not in XML, which is not right.
Deal with the incompatible changes in the VirtualBox 4.1 API.
INetworkAdapter has its different AttachTo* method replaced by
a settable attachmentType property.
The maximum number of network adapters is now requestable per
chipset type.
The OpenMedium method got a bool parameter to request opening
a medium under a new IID.
privP->session->error_description is a list and in order to get the
complete error message all parts of the list should be concatenated.
xenapiSessionErrorHandler does this when its third parameter is NULL.
The current code discards all but the first part of the error message
resulting in a potentially incomplete error message.
This partly reverts 006be75ee2, that tried to avoid reporting
a (null) in the error message. The actual problem is more general in
returnErrorFromSession that might return NULL if there is no error.
Make sure that returnErrorFromSession return non-NULL always. Also
don't skip the last error message part.
- changed some return 1's to return -1
- changed if (rc) error checks to if (rc < 0)
- fixed some other minor convention violations
I might have missed some. Can fix in another patch or can respin
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Reported-by: Eric Blake <eblake@redhat.com>
Reported-by: Laine Stump <laine@laine.org>
Signed-off-by: Eric Blake <eblake@redhat.com>
When using the xml as below:
------------------------------------------------------
<devices>
<emulator>/home/soulxu/data/work-code/qemu-kvm/x86_64-softmmu/qemu-system-x86_64</emulator>
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2'/>
<source file='/home/soulxu/data/VM/images/linux.img'/>
<target dev='vda' bus='virtio'/>
<address type='drive' controller='0' bus='0' unit='0'/>
</disk>
<input type='mouse' bus='ps2'/>
<graphics type='vnc' port='-1' autoport='yes'/>
<video>
<model type='cirrus' vram='9216' heads='1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
</video>
<memballoon model='virtio'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
</memballoon>
</devices>
------------------------------------------------------
Then can't startup qemu, the error message as below:
virsh # start test-vm
error: Failed to start domain test-vm
error: internal error process exited while connecting to monitor: qemu-system-x86_64: -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3: PCI: slot 3 function 0 not available for virtio-balloon-pci, in use by virtio-blk-pci
qemu-system-x86_64: -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3: Device 'virtio-balloon-pci' could not be initialized
So adding check for bus type and address type. Only the address of pci type support by virtio bus.
Signed-off-by: Xu He Jie <xuhj@linux.vnet.ibm.com>
Add additional fields to let you specify the how to authenticate with a disk.
The secret to use may be referenced by a usage string or a UUID, i.e.:
<auth username='myuser'>
<secret type='ceph' usage='secretname'/>
</auth>
or
<auth username='myuser'>
<secret type='ceph' uuid='0a81f5b2-8403-7b23-c8d6-21ccc2f80d6f'/>
</auth>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Add a new secret type to store a Ceph authentication key. The name
is simply an identifier for easy human reference.
The xml looks like this:
<secret ephemeral='no' private='no'>
<uuid>0a81f5b2-8403-7b23-c8d6-21ccc2f80d6f</uuid>
<usage type='ceph'>
<name>mycluster_admin</name>
</usage>
</secret>
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.net>
Leak introduced in commit c1bc3d89.
Detected by valgrind:
==18462== 1,100 bytes in 1 blocks are definitely lost in loss record 183 of 184
==18462== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==18462== by 0x4A06167: realloc (vg_replace_malloc.c:525)
==18462== by 0x4AADBB: virReallocN (memory.c:161)
==18462== by 0x4A975E: virBufferGrow (buf.c:117)
==18462== by 0x4A9D92: virBufferVasprintf (buf.c:290)
==18462== by 0x4A9EF7: virBufferAsprintf (buf.c:263)
==18462== by 0x429488: qemuBuildControllerDevStr (qemu_command.c:1993)
==18462== by 0x42C4B6: qemuBuildCommandLine (qemu_command.c:3803)
==18462== by 0x41A604: testCompareXMLToArgvHelper (qemuxml2argvtest.c:124)
==18462== by 0x41BB81: virtTestRun (testutils.c:141)
==18462== by 0x416DFF: mymain (qemuxml2argvtest.c:369)
==18462== by 0x41B277: virtTestMain (testutils.c:696)
==18462==
==18462== LEAK SUMMARY:
==18462== definitely lost: 1,100 bytes in 1 blocks
==18462== indirectly lost: 0 bytes in 0 blocks
* src/qemu/qemu_command.c (qemuBuildCommandLine): Clean up on success.
Signed-off-by: Alex Jia <ajia@redhat.com>
Detected by Coverity. The fix in 2c27dfa didn't catch all bad
instances of memcpy(). Thankfully, on further analysis, all of
the problematic uses are only triggered by old qemu that lacks
-device.
* src/qemu/qemu_hotplug.c (qemuDomainAttachPciDiskDevice)
(qemuDomainAttachNetDevice, qemuDomainAttachHostPciDevice): Init
all fields since monitor only populates some of them.
Since it needs to access file descriptors passed in the msg,
the RPC driver for virDomainOpenGraphics needs to be manually
implemented.
* daemon/remote.c: RPC server dispatcher
* src/remote/remote_driver.c: RPC client dispatcher
* src/remote/remote_protocol.x: Define protocol
The RPC server classes are extended to allow FDs to be received
from clients with calls. There is not currently any way for a
procedure to pass FDs back to the client with replies
* daemon/remote.c, src/rpc/gendispatch.pl: Change virNetMessageHeaderPtr
param to virNetMessagePtr in dispatcher impls
* src/rpc/virnetserver.c, src/rpc/virnetserverclient.c,
src/rpc/virnetserverprogram.c, src/rpc/virnetserverprogram.h:
Extend to support FD passing
Extend the RPC client code to allow file descriptors to be sent
to the server with calls, and received back with replies.
* src/remote/remote_driver.c: Stub extra args
* src/libvirt_private.syms, src/rpc/virnetclient.c,
src/rpc/virnetclient.h, src/rpc/virnetclientprogram.c,
src/rpc/virnetclientprogram.h: Extend APIs to allow
FD passing
Define two new RPC message types VIR_NET_CALL_WITH_FDS and
VIR_NET_REPLY_WITH_FDS. These message types are equivalent
to VIR_NET_CALL and VIR_NET_REPLY, except that between the
message header, and payload there is a 32-bit integer field
specifying how many file descriptors have been passed.
The actual file descriptors are sent/recv'd out of band.
* src/rpc/virnetmessage.c, src/rpc/virnetmessage.h,
src/libvirt_private.syms: Add support for handling
passed file descriptors
* src/rpc/virnetprotocol.x: Extend protocol for FD
passing
Add APIs to the virNetSocket object, to allow file descriptors
to be sent/received over UNIX domain socket connections
* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h,
src/libvirt_private.syms: Add APIs for FD send/recv
The QEMU monitor command 'add_client' can be used to connect to
a VNC or SPICE graphics display. This allows for implementation
of the virDomainOpenGraphics API
* src/qemu/qemu_driver.c: Implement virDomainOpenGraphics
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
Add binding for 'add_client' command
Not all VNC/SPICE servers use a TCP socket for their connections.
It is possible to configure a UNIX socket server. The graphics
event must thus include a UNIX socket address type.
* include/libvirt/libvirt.h.in: Add UNIX socket address type
for graphics event
* src/qemu/qemu_monitor_json.c: Add 'unix' string to address
type enum
The virDomainOpenGraphics API allows a libvirt client to pass in
a file descriptor for an open socket pair, and get it connected
to the graphics display of the guest. This is limited to working
with local libvirt hypervisors connected over a UNIX domain
socket, since it will use UNIX FD passing
* include/libvirt/libvirt.h.in: Define virDomainOpenGraphics
* src/driver.h: Define driver for virDomainOpenGraphics
* src/libvirt_public.syms, src/libvirt.c: Entry point for
virDomainOpenGraphics
* src/libvirt_internal.h: VIR_DRV_FEATURE_FD_PASSING
This refactors the TAP creation code out of brAddTap into a new
function brCreateTap to allow it to be used on its own. I have also
changed ifSetInterfaceMac to brSetInterfaceMac and exported it since
it is will be needed by code outside of util/bridge.c in the next
patch.
AUTHORS | 1 +
src/libvirt_bridge.syms | 2 +
src/util/bridge.c | 116 +++++++++++++++++++++++++++++++----------------
src/util/bridge.h | 9 ++++
4 files changed, 89 insertions(+), 39 deletions(-)
Every time we write XML into a file we call virEmitXMLWarning to write a
warning that the file is automatically generated. virXMLSaveFile
simplifies this into a single step and makes rewriting existing XML file
safe by using virFileRewrite internally.
When saving config files we just overwrite old content of the file. In
case something fails during that process (e.g. disk gets full) we lose
both old and new content. This patch makes the process more robust by
writing the new content into a separate file and only if that succeeds
the original file is atomically replaced with the new one.
This change adds some systemtap/dtrace probes to the QEMU monitor
client code. In particular it allows watching of all operations
for a VM
* examples/systemtap/qemu-monitor.stp: Watch all monitor commands
* src/Makefile.am: Passing libdir/bindir/sbindir to dtrace2systemtap.pl
* src/dtrace2systemtap.pl: Accept libdir/bindir/sbindir as args
and look for '# binary:' comment to mark probes against libvirtd
vs libvirt.so
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor_json.c,
src/qemu/qemu_monitor_text.c: Add probes for key functions
Previous commit clears number of items alocated in lxcSetupLoopDevices
if VIR_REALLOC_N fails. In that case, the pointer is not NULL, and
causes leaking FDs that have been allocated.
* src/lxc/lxc_controller.c: revert zeroing array size
If the function lxcSetupLoopDevices(def, &nloopDevs, &loopDevs) failed,
the variable loopDevs will keep a initial NULL value, however, the
function VIR_FORCE_CLOSE(loopDevs[i]) will directly deref it.
This patch also fixes returning a bogous number of devices from
lxcSetupLoopDevices on an error path.
* rc/lxc/lxc_controller.c: fixed a null pointer dereference.
Signed-off-by: Alex Jia <ajia@redhat.com>
Cppcheck detected a syntaxError on lxcDomainInterfaceStats.
* src/lxc/lxc_driver.c: fixed missing '{' in the function lxcDomainInterfaceStats.
Signed-off-by: Alex Jia <ajia@redhat.com>
Rather than making all clients of monitor commands that are JSON-only
check whether yajl support was compiled in, it is simpler to just
avoid setting the capability bit up front if we can't use the capability.
* src/qemu/qemu_capabilities.c (qemuCapsComputeCmdFlags): Only set
capability bit if we also have yajl library to use it.
* src/qemu/qemu_driver.c (qemuDomainReboot): Drop #ifdefs.
* src/qemu/qemu_process.c (qemuProcessStart): Likewise.
* tests/qemuhelptest.c (testHelpStrParsing): Pass test even
without yajl.
* tests/qemuxml2argvtest.c (mymain): Simplify use of json flag.
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-error-*.args:
Update expected results to match.
Break some long lines, and use more efficient functions when possible,
such as relying on virBufferEscapeString to skip output on a NULL arg.
Ensure that output does not embed newlines, since auto-indent won't
work in those situations.
* src/conf/domain_conf.c (virDomainTimerDefFormat): Break output lines.
(virDomainDefFormatInternal, virDomainDiskDefFormat)
(virDomainActualNetDefFormat, virDomainNetDefFormat)
(virDomainHostdevDefFormat): Minor cleanups.
Fixing this involved some refactoring of common code out of
domain_conf and nwfilter_conf into nwfilter_params.
* src/conf/nwfilter_params.h (virNWFilterFormatParamAttributes):
Adjust signature.
* src/conf/nwfilter_params.c (_formatParameterAttrs)
(virNWFilterFormatParamAttributes): Adjust indentation handling,
and handle filterref here.
(formatterParam): Delete unused struct.
* src/conf/domain_conf.c (virDomainNetDefFormat): Adjust caller.
* src/conf/nwfilter_conf.c (virNWFilterIncludeDefFormat): Likewise.
Detected by Coverity. Only possible if qemu-img gives bogus output,
but we might as well be robust.
* src/storage/storage_backend.c
(virStorageBackendQEMUImgBackingFormat): Check for strstr failure.
If a disk source gets dropped because it is not accessible,
mgmt application might want to be informed about this. Therefore
we need to emit an event. The event presented in this patch
is however a bit superset of what written above. The reason is simple:
an intention to be easily expanded, e.g. on 'user ejected disk
in guest' events. Therefore, callback gets source string and disk alias
(which should be unique among a domain) and reason (an integer);
This patch implements on_missing feature in qemu driver.
Upon qemu startup process an accessibility of CDROMs
and floppy disks is checked. The source might get dropped
if unavailable and on_missing is set accordingly.
No event is emit thought. Look for follow up patch.
This patch is rather cosmetic as it only moves device alias
assignation from command line construction just before that.
However, it is needed in connotation of previous and next patch.
This attribute says what to do with cdrom (or floppy) if
the source is missing. It accepts:
- mandatory - fail if missing for any reason (the default)
- requisite - fail if missing on boot up, drop if missing on
migrate/restore/revert
- optional - drop if missing at any start attempt.
However, this patch introduces only XML part of this new
functionality.
Splitting into two functions allows the user to call the right
function, rather than having to remember that a *Free function is
an exception to the rule.
* src/conf/storage_conf.h (virStoragePoolSourceClear): New function.
* src/libvirt_private.syms (storage_conf.h): Export it.
* src/conf/storage_conf.c (virStoragePoolSourceFree): Split...
(virStoragePoolSourceClear): ...into new function.
(virStoragePoolDefFree, virStoragePoolDefParseSourceString):
Update callers.
* src/test/test_driver.c (testStorageFindPoolSources): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemNetFindPoolSourcesFunc)
(virStorageBackendFileSystemNetFindPoolSources): Likewise.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSIFindPoolSources): Likewise.
* src/storage/storage_backend_logical.c
(virStorageBackendLogicalFindPoolSources): Likewise.
Detected by Coverity. virStoragePoolSourceFree does not free the
actual passed-in pointer. A bigger patch would be to rename it
virStoragePoolSourceClear to match behavior, or even split it into
two functions depending on needed behavior; but this is the minimal
fix to the one location out of eight that leaked memory.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSIFindPoolSources): Free memory.
Based on a report by Coverity. waitpid() can leak resources if it
fails with EINTR, so it should never be used without checking return
status. But we already have a helper function that does that, so
use it in more places.
* src/lxc/lxc_container.c (lxcContainerAvailable): Use safer
virWaitPid.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput, virtTestMain):
Likewise.
* src/libvirt.c (virConnectAuthGainPolkit): Simplify with virCommand.
Detected by Coverity. Both text and JSON monitors set only the
bus and unit fields, which means driveAddr.controller spends
life as garbage on the stack, and is then memcpy()'d into the
in-memory representation which the user can see via dumpxml.
* src/qemu/qemu_hotplug.c (qemuDomainAttachSCSIDisk): Only copy
defined fields.
More simplifications possible due to auto-indent. Also,
<bandwidth> within <actual> was only using 6 instead of 8 spaces.
* src/util/network.h (virVirtualPortProfileFormat)
(virBandwidthDefFormat): Alter signature.
* src/util/network.c (virVirtualPortProfileFormat)
(virBandwidthDefFormat): Alter indentation.
(virBandwidthChildDefFormat): Tweak to make use easier.
* src/conf/network_conf.c (virPortGroupDefFormat)
(virNetworkDefFormat): Adjust callers.
* src/conf/domain_conf.c (virDomainNetDefFormat): Likewise.
(virDomainActualNetDefFormat): Likewise, and fix bandwidth
indentation.
Auto-indent makes life a bit easier; this patch also drops unused
arguments and replaces a misspelled flag name with two entry points
instead, so that callers don't have to worry about how much spacing
is present when embedding cpu elements.
* src/conf/cpu_conf.h (virCPUFormatFlags): Delete.
(virCPUDefFormat): Drop unused argument.
(virCPUDefFormatBuf): Alter signature.
(virCPUDefFormatBufFull): New prototype.
* src/conf/cpu_conf.c (virCPUDefFormatBuf): Split...
(virCPUDefFormatBufFull): ...into new function.
(virCPUDefFormat): Adjust caller.
* src/conf/domain_conf.c (virDomainDefFormatInternal): Likewise.
* src/conf/capabilities.c (virCapabilitiesFormatXML): Likewise.
* src/cpu/cpu.c (cpuBaselineXML): Likewise.
* tests/cputest.c (cpuTestCompareXML): Likewise.
The improvements to virBuffer, along with a paradigm shift to pass
the original buffer through rather than creating a second buffer,
allow us to shave off quite a few lines of code.
* src/util/sysinfo.h (virSysinfoFormat): Alter signature.
* src/util/sysinfo.c (virSysinfoFormat, virSysinfoBIOSFormat)
(virSysinfoSystemFormat, virSysinfoProcessorFormat)
(virSysinfoMemoryFormat): Change indentation parameter.
* src/conf/domain_conf.c (virDomainSysinfoDefFormat): Adjust
caller.
* src/qemu/qemu_driver.c (qemuGetSysinfo): Likewise.
Add a test for the simple parts of my indentation changes, and
fix the fallout.
* tests/domainsnapshotxml2xmltest.c: New test.
* tests/Makefile.am (domainsnapshotxml2xmltest_SOURCES): Build it.
* src/conf/domain_conf.c (virDomainSnapshotDefFormat): Avoid NULL
deref, match documented order.
* src/conf/domain_conf.h (virDomainSnapshotDefFormat): Add const.
* tests/domainsnapshotxml2xmlout/all_parameters.xml: Tweak output.
* tests/domainsnapshotxml2xmlout/disk_snapshot.xml: Likewise.
* tests/domainsnapshotxml2xmlout/full_domain.xml: Likewise.
* .gitignore: Exempt new binary.
<domainsnapshot> is the first public instance of <domain> being
used as a sub-element, although we have two other private uses
(runtime state, and migration cookie). Although indentation has
no effect on XML parsing, using it makes the output more consistent.
This uses virBuffer auto-indentation to obtain the effect, for all
but the portions of <domain> that are not generated a line at a
time into the same virBuffer. Further patches will clean up the
remaining problems.
* src/conf/domain_conf.h (virDomainDefFormatInternal): New prototype.
* src/conf/domain_conf.c (virDomainDefFormatInternal): Export.
(virDomainObjFormat, virDomainSnapshotDefFormat): Update callers.
* src/libvirt_private.syms (domain_conf.h): Add new export.
* src/qemu/qemu_migration.c (qemuMigrationCookieXMLFormat): Use
new function.
(qemuMigrationCookieXMLFormatStr): Update caller.
Rather than having to adjust all callers in a chain to deal with
indentation, it is nicer to have virBuffer do auto-indentation.
* src/util/buf.h (_virBuffer): Increase size.
(virBufferAdjustIndent, virBufferGetIndent): New prototypes.
* src/libvirt_private.syms (buf.h): Export new functions.
* src/util/buf.c (virBufferAdjustIndent, virBufferGetIndent): New
functions.
(virBufferSetError, virBufferAdd, virBufferAddChar)
(virBufferVasprintf, virBufferStrcat, virBufferURIEncodeString):
Implement auto-indentation.
* tests/virbuftest.c (testBufAutoIndent): Test it.
(testBufInfiniteLoop): Don't rely on internals.
Idea by Daniel P. Berrange.
The next patch wants to add some sanity checking, which would
be a different error than ENOMEM. Many existing callers blindly
report OOM failure if virBuf reports an error, and this will be
wrong in the (unlikely) case that they actually had a usage error
instead; but since the most common error really is ENOMEM, I'm
not going to fix all callers. Meanwhile, new discriminating
callers can react differently depending on what failure happened.
* src/util/buf.c (virBufferSetError): Add parameter.
(virBufferGrow, virBufferVasprintf, virBufferEscapeString)
(virBufferEscapeSexpr, virBufferEscapeShell): Adjust callers.
Although the compiler wasn't complaining (since it was the pointer,
rather than what was being pointed to, that was actually const), it
looks quite suspicious to call a function with an argument labeled
const when the nature of the pointer (virBufferPtr) is hidden behind
a typedef. Dropping const makes the function declarations easier
to read.
* src/util/buf.h: Drop const from all functions that modify buffer
argument.
* src/util/buf.c (virBufferSetError, virBufferAdd)
(virBufferContentAndReset, virBufferFreeAndReset)
(virBufferAsprintf, virBufferVasprintf, virBufferEscapeString)
(virBufferEscapeSexpr, virBufferEscape): Fix fallout.
There is a little difference between the output of domxml-to-native and the actual commandline.
No matter qemu is in control or readline mode, domxml-to-native always converts it to readline mode.
That is because the parameter "monitor_json" for qemuBuildCommandLine() is always set to false
in qemuDomainXMLToNative().
Signed-off-by: tangchen <tangchen@cn.fujitsu.com>
The glibc ones (intentionally) cannot handle ptys opened in a
devpts not mounted at /dev/pts.
Drop the (un-exported, unused) virFileOpenTtyAt.
Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The XML parser for the qemu specific extensions expects the qemu name-space
to be bound to the 'qemu' prefix. This is too strict, since the name of the
name-space-prefix is only meant as an internal lookup key. Only the associated
URI is relevant.
<domain>...
<qemu:commandline xmlns:qemu="http://libvirt.org/schemas/domain/qemu/1.0">
...</qemu:commandline>
</domain>
<domain xmlns:ns0="http://libvirt.org/schemas/domain/qemu/1.0">...
<ns0:commandline>
...</ns0:commandline>
</domain>
<domain xmlns:qemu="http://libvirt.org/schemas/domain/qemu/1.0">
<qemu:commandline xmlns:qemu="urn:foo">
...</qemu:commandline>
</domain>
Remove the test for checking the name-space binding on the top-level <domain>
element. Registering the name-space with XPath is enough.
Signed-off-by: Philipp Hahn <hahn@univention.de>
When I compile libvirt with gcc-4.6.1 in ubuntu 11.10, got error as below:
CCLD libvirtd
/usr/bin/ld: ../src/.libs/libvirt_driver_qemu.a(libvirt_driver_qemu_la-qemu_migration.o): undefined reference to symbol 'gnutls_x509_crt_get_dn@@GNUTLS_1_4'
/usr/bin/ld: note: 'gnutls_x509_crt_get_dn@@GNUTLS_1_4' is defined in DSO /usr/lib/x86_64-linux-gnu/libgnutls.so so try adding it to the linker command line
/usr/lib/x86_64-linux-gnu/libgnutls.so: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
make[3]: *** [libvirtd] Error 1
It can compile with gcc-4.5.2 in ubuntu 11.04, but it can not compile with gcc-4.6.1 in ubuntu 11.10.
I didn't find reason. Does Anyone know the reason or the different between gcc-4.5.2 and gcc-4.6.1?
I still provide a patch for this. Just make it is working now.
Signed-off-by: soulxu <soulxu@soulxu-ThinkPad-T410.(none)>
This adds support for a libvirt client configuration file
either /etc/libvirt/libvirt.conf for privileged clients,
or $HOME/.libvirt/libvirt.conf for unprivileged clients.
It allows one parameter
uri_aliases = [
"hail=qemu+ssh://root@hail.cloud.example.com/system",
"sleet=qemu+ssh://root@sleet.cloud.example.com/system",
]
Any call to virConnectOpen with a non-NULL URI will first
attempt to match against the uri_aliases list. An application
can disable this by using VIR_CONNECT_NO_ALIASES
* docs/uri.html.in: Document URI aliases
* include/libvirt/libvirt.h.in: Add VIR_CONNECT_NO_ALIASES
* libvirt.spec.in, mingw32-libvirt.spec.in: Add /etc/libvirt/libvirt.conf
* src/Makefile.am: Install default config file
* src/libvirt.c: Add support for URI aliases
* src/remote/remote_driver.c: Don't try to handle URIs
with no scheme and which clearly are not paths
* src/util/conf.c: Don't raise error on virConfFree(NULL)
* src/xen/xen_driver.c: Don't raise error on URIs
with no scheme
We recently added support for VIR_DOMAIN_START_AUTODESTROY and
an impl to the QEMU driver. It is very desirable to support in
other drivers, so this adds it to LXC and UML
* src/lxc/lxc_conf.h, src/lxc/lxc_driver.c,
src/uml/uml_conf.h, src/uml/uml_driver.c: Wire up autodestroy
functions
Noticed when testing new libvirt against old qemu that lacked the
snapshot_blkdev HMP command. Libvirt was mistakenly treating the
command as successful, and re-writing the domain XML to use the
just-created 0-byte file, rendering the domain broken on restart.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextDiskSnapshot):
Notice another possible error message.
* src/qemu/qemu_driver.c
(qemuDomainSnapshotCreateSingleDiskActive): Don't keep 0-byte file
on failure.
compile error:
./src/.libs/libvirt_driver_qemu.a(libvirt_driver_qemu_la-qemu_hostdev.o): In function `qemuPrepareHostdevPCIDevices':
/home/soulxu/data/work-code/libvirt/src/qemu/qemu_hostdev.c:183: undefined reference to `pciDeviceListFind'
/home/soulxu/data/work-code/libvirt/src/qemu/qemu_hostdev.c:230: undefined reference to `pciDeviceListFind'
./src/.libs/libvirt_driver_qemu.a(libvirt_driver_qemu_la-qemu_hostdev.o): In function `qemuGetActivePciHostDeviceList':
/home/soulxu/data/work-code/libvirt/src/qemu/qemu_hostdev.c:102: undefined reference to `pciDeviceListFind'
./src/.libs/libvirt_driver_qemu.a(libvirt_driver_qemu_la-qemu_hostdev.o): In function `qemuDomainReAttachHostdevDevices':
/home/soulxu/data/work-code/libvirt/src/qemu/qemu_hostdev.c:370: undefined reference to `pciDeviceListFind'
Signed-off-by: Xu He Jie <xuhj@linux.vnet.ibm.com>
probes.h is generated in build directory; setting a dependency on
probes.h from source directory doesn't work well in VPATH builds. Caused
by commit 1afcfbdda0
When I run 'make dist', I receive the following error messages:
make[1]: Entering directory `/home/wency/source/libvirt/src'
GEN remote/remote_protocol.h
GEN remote/remote_protocol.c
GEN remote/qemu_protocol.h
GEN remote/qemu_protocol.c
GEN remote/qemu_client_bodies.h
CC libvirt_driver_remote_la-remote_protocol.lo
In file included from ./remote/remote_protocol.h:16,
from ./remote/remote_protocol.c:7:
/internal.h:249:23: error: probes.h: No such file or directory
make[1]: *** [libvirt_driver_remote_la-remote_protocol.lo] Error 1
make[1]: Leaving directory `/home/wency/source/libvirt/src'
make: *** [distdir] Error 1
The reason is that we use probes.h before generating it.
BZ# https://bugzilla.redhat.com/show_bug.cgi?id=736214
The problem is caused by the original info of domain's PCI dev is
maintained by qemu_driver->activePciHostdevs list, (E.g. dev->reprobe,
which stands for whether need to reprobe driver for the dev when do
reattachment). The fields (dev->reprobe, dev->unbind_from_stub, and
dev->remove_slot) are initialized properly when preparing the PCI
device for managed attachment. However, when do reattachment, it
construct a complete new "pciDevice" without honoring the original
dev info, and thus the dev won't get the original driver or can get
other problem.
This patch is to fix the problem by get the devs from list
driver->activePciHostdevs.
Tested with following 3 scenarios:
* the PCI was bound to some driver not pci-stub before attaching
result: the device will be bound to the original driver
* the PCI was bound to pci-stub before attaching
result: no driver reprobing, and still bound to pci-stub
* The PCI was not bound to any driver
result: no driver reprobing, and still not bound to any driver.
Commit 0472f39 plugged a leak, but introduced another bug:
Actually looks like physfndev is conditionally allocated in getPhysfnDev
Its better to modify getPhysfnDev to allocate physfndev every time.
When failing on starting a domain, it tries to reattach all the PCI
devices defined in the domain conf, regardless of whether the devices
are still used by other domain. This will cause the devices to be deleted
from the list qemu_driver->activePciHostdevs, thus the devices will be
thought as usable even if it's not true. And following commands
nodedev-{reattach,reset} will be successful.
How to reproduce:
1) Define two domains with same PCI device defined in the confs.
2) # virsh start domain1
3) # virsh start domain2
4) # virsh nodedev-reattach $pci_device
You will see the device will be reattached to host successfully.
As pciDeviceReattach just check if the device is still used by
other domain via checking if the device is in list driver->activePciHostdevs,
however, the device is deleted from the list by step 2).
This patch is to prohibit the bug by:
1) Prohibit a domain starting or device attachment right at
preparation period (qemuPrepareHostdevPCIDevices) if the
device is in list driver->activePciHostdevs, which means
it's used by other domain.
2) Introduces a new field for struct _pciDevice, (const char *used_by),
it will be set as the domain name at preparation period,
(qemuPrepareHostdevPCIDevices). Thus we can prohibit deleting
the device from driver->activePciHostdevs if it's still used by
other domain when stopping the domain process.
* src/pci.h (define two internal functions, pciDeviceSetUsedBy and
pciDevceGetUsedBy)
* src/pci.c (new field "const char *used_by" for struct _pciDevice,
implementations for the two new functions)
* src/libvirt_private.syms (Add the two new internal functions)
* src/qemu_hostdev.h (Modify the definition of functions
qemuPrepareHostdevPCIDevices, and qemuDomainReAttachHostdevDevices)
* src/qemu_hostdev.c (Prohibit preparation and don't delete the
device from activePciHostdevs list if it's still used by other domain)
* src/qemu_hotplug.c (Update function usage, as the definitions are
changed)
Signed-off-by: Eric Blake <eblake@redhat.com>
virInitialize() → xenRegister() → xenhypervisorInit() determines the
version of the Hypervisor. This breaks xencapstest when building as root
on a dom0 system, since xenHypervisorBuildCapabilities() adds the "hap"
and "viridian" features based on the detected version.
Add an optional parameter to xenhypervisorInit() to disable automatic
detection of the Hypervisor version. The passed in arguments are used
instead.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Calling virInitialize() → xenRegister() → xenhypervisorInit() directly
opens a connection to the Xen Hypervisor, which breaks some unit tests.
Move all static variables into a struct to make it easier to override
them when testing.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Coverity detected that the only way to get to the cleanup label
is if objectSpec had been successfully allocated, so the null
check was dead code.
* src/esx/esx_vi.c (esxVI_LookupObjectContentByType): Drop
redundant null check.
Detected by Coverity. Leak present since commit 874e65a; and
while commit d50bb45 tried to fix the issue, it missed a path.
* src/conf/domain_conf.c (virDomainDefParseBootXML): Always clean
up useserial.
Setting a hostname that cannot be resolved is not the best configuration
but since virGetHostname only calls getaddrinfo to get host's canonical
name and we do not fail if the returned canonical name is NULL or
"localhost", there is no reason why we should fail if getaddrinfo itself
fails.
Detected by Coverity. p (the pointer to the string) is always true;
when in reality, we wanted to know whether the integer value of the
just-parsed string is '0' or '1'. Logic bug since commit b1b5b51.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextGetBlockInfo): Set
results to proper value.
Detected by Coverity. If, for some reason, our text monitor input
does not match our assumptions, we end up incrementing p while it
is NULL, then dereferencing the pointer 0x1, which will fault.
* src/qemu/qemu_monitor_text.c
(qemuMonitorTextGetBlockStatsParamsNumber): Rewrite to avoid
deref of strchr failure. Fix indentation.
Coverity complained that most, but not all, clients of virUUIDParse
were checking for errors. Silence those coverity warnings by
explicitly marking the cases where we trust the input, and fixing
one instance that really should have been checking. In particular,
this silences a rather large percentage of the warnings I saw on my
most recent Coverity analysis run.
* src/util/uuid.h (virUUIDParse): Enforce rules.
* src/util/uuid.c (virUUIDParse): Drop impossible check; at least
Coverity will detect if we break rules and pass NULL.
* src/xenapi/xenapi_driver.c (xenapiDomainCreateXML)
(xenapiDomainLookupByID, xenapiDomainLookupByName)
(xenapiDomainDefineXML): Ignore return when we trust data source.
* src/vbox/vbox_tmpl.c (nsIDtoChar, vboxIIDToUUID_v3_x)
(vboxCallbackOnMachineStateChange)
(vboxCallbackOnMachineRegistered, vboxStoragePoolLookupByName):
Likewise.
* src/node_device/node_device_hal.c (gather_system_cap): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxpr): Check for errors.
In virFDStreamOpenFileInternal(), a errfd pipe is opened by
virCommandRunAsync() and given to virFDStreamOpenInternal().
It seems virFDStream should close errfd, just like the other
fd it is given.
This fixes screenshots leaking FDs:
http://bugzilla.redhat.com/show_bug.cgi?id=745761
virCommandTransferFD promises that the fd is no longer owned by
the caller. Normally, we want the fd to remain open until the
child runs, but in error situations, we must close it earlier.
* src/util/command.c (virCommandTransferFD): Close fd now if we
can't track it to close later.
(virCommandKeepFD): Adjust helper to make this easier.
As this is needed. Although some functions check for domain
being active before obtaining job, we need to check it after,
because obtaining job unlocks domain object, during which
a state of domain can be changed.
Currently, push & pop from event queue (both server & client side)
rely on lock from higher levels, e.g. on driver lock (qemu),
private_data (remote), ...; This alone is not sufficient as not
every function that interacts with this queue can/does lock,
esp. in client where we have a different approach, "passing
the buck".
Therefore we need a separate lock just to protect event queue.
For more info see:
https://bugzilla.redhat.com/show_bug.cgi?id=743817
This patch extends qemudDomainCoreDump so it supports new VIR_DUMP_RESET
flag. If this flag is set, domain is reset on successful dump. However,
this is needed to be done after we start CPUs.
With the recent refactoring of qemu snapshot relationships, it
is now trivial to filter on leaves.
* src/conf/domain_conf.c (virDomainSnapshotObjListCount)
(virDomainSnapshotObjListCopyNames): Handle new flag.
* src/qemu/qemu_driver.c (qemuDomainSnapshotListNames)
(qemuDomainSnapshotNum, qemuDomainSnapshotListChildrenNames)
(qemuDomainSnapshotNumChildren): Pass new flag through.
For some versions of Xen the difference between "tap" and "tap2" is
important. When converting back from xen-sxpr to libvirt-xml, that
information is lost, which breaks re-defining the domain using that
data.
Explicitly return "tap2" for disks defined as "device/tap2".
Signed-off-by: Philipp Hahn <hahn@univention.de>
When PyGrub is used as the bootloader in Xen, it gets passed the first
bootable disk. Xend supports a "bootable"-flag for this, which isn't
explicitly supported by libvirt.
When converting libvirt-xml to xen-sxpr the "bootable"-flag gets
implicitly set by xen.xend.XenConfig.device_add() for the first disk
(marked as "Compat hack -- mark first disk bootable").
When converting back xen-sxpr to libvirt-xml, the disks are returned in
the internal order used by Xend ignoring the "bootable"-flag, which
loses the original order. When the domain is then re-defined, the order
of disks is changed, which breaks PyGrub, since a different disk gets
passed.
When converting xen-sxpr to libvirt-xml, use the "bootable"-flag to
determine the first disk.
This isn't perfect, since several disks can be marked as bootable using
the Xend-API, but that is not supported by libvirt. In all known cases
relevant to libvirt exactly one disk is marked as bootable.
Signed-off-by: Philipp Hahn <hahn@univention.de>
VirtFS allows the user to choose between path/handle based fs driver.
As of now, libvirt hardcoded path based driver only. This patch provides
a solution to allow user to choose between path/handle based fs driver.
Sample:
<filesystem type='mount'>
<driver type='handle'/>
<source dir='/folder/to/share1'/>
<target dir='mount_tag1'/>
</filesystem>
<filesystem type='mount'>
<driver type='path'/>
<source dir='/folder/to/share2'/>
<target dir='mount_tag2'/>
</filesystem>
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Implement a generic helper to escape a given set of characters with a
leading '\'. Generalizes virBufferEscapeSexpr().
Signed-off-by: Sage Weil <sage@newdream.net>
The previous optimizations lead to some follow-on cleanups.
* src/conf/domain_conf.c (virDomainSnapshotForEachChild)
(virDomainSnapshotForEachDescendant): Drop dead parameter.
(virDomainSnapshotActOnDescendant)
(virDomainSnapshotObjListNumFrom)
(virDomainSnapshotObjListGetNamesFrom): Update callers.
* src/qemu/qemu_driver.c (qemuDomainSnapshotNumChildren)
(qemuDomainSnapshotListChildrenNames, qemuDomainSnapshotDelete):
Likewise.
* src/conf/domain_conf.h: Update prototypes.
Among other improvements, virDomainSnapshotForEachDescendant is
changed from iterative O(n^2) to recursive O(n). A bit better
than the O(n^3) implementation in virsh snapshot-list!
* src/conf/domain_conf.c (virDomainSnapshotObjListNum)
(virDomainSnapshotObjListNumFrom)
(virDomainSnapshotObjeListGetNames, virDomainSnapshotForEachChild)
(virDomainSnapshotForEachDescendant): Optimize.
(virDomainSnapshotActOnDescendant): Tweak.
(virDomainSnapshotActOnChild, virDomainSnapshotMarkDescendant):
Delete, now that they are unused.
Maintain the parent/child relationships of all qemu snapshots.
* src/qemu/qemu_driver.c (qemuDomainSnapshotLoad): Populate
relationships after loading.
(qemuDomainSnapshotCreateXML): Set relations on creation; tweak
redefinition to reuse existing object.
(qemuDomainSnapshotReparentChildren, qemuDomainSnapshotDelete):
Clear relations on delete.
No one was using virDomainSnapshotHasChildren, but that was an
O(n) function. Exposing and tracking a bit more metadata for each
snapshot will allow the same query to be made with an O(1) query
of the member field. For single snapshot operations (create,
delete), callers can be trusted to maintain the metadata themselves,
but for reloading, we can't compute parents as we go since there
is no guarantee that parents were parsed before children, so we also
provide a function to refresh the relationships, and which can
be used to detect if the user has ignored our warnings and been
directly modifying files in /var/lib/libvirt/qemu/snapshot. This
patch only adds metadata; later patches will actually use it.
This layout intentionally hardcodes the size of each snapshot struct,
by tracking sibling pointers, rather than having to deal with the
headache of yet more memory management by directly sticking a
dynamically sized child[] on each parent.
* src/conf/domain_conf.h (_virDomainSnapshotObj)
(_virDomainSnapshotObjList): Add members.
(virDomainSnapshotUpdateRelations, virDomainSnapshotDropParent):
New prototypes.
(virDomainSnapshotHasChildren): Delete.
* src/conf/domain_conf.c (virDomainSnapshotSetRelations)
(virDomainSnapshotUpdateRelations, virDomainSnapshotDropParent):
New functions.
(virDomainSnapshotHasChildren): Drop unused function.
* src/libvirt_private.syms (domain_conf): Update exports.
To date, JSON disk snapshots worked by accident, as they were always
using hmp fallback due to a typo in commit e702b5b not picking up
on the (intentional) difference in command names between the two
monitor protocols.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDiskSnapshot):
Spell QMP command correctly.
Reported by Luiz Capitulino.
Detected by autogen.sh on a cross-mingw build:
Creating library file: .libs/libvirt.dll.a
Cannot export virNetSASLContextCheckIdentity: symbol not defined
Cannot export virNetSASLContextNewServer: symbol not defined
...
* src/libvirt_private.syms (virnetsaslcontext.h): Move symbols...
* src/libvirt_sasl.syms: ...to new file.
* src/Makefile.am (USED_SYM_FILES) [HAVE_SASL]: Use new file.
(EXTRA_DIST): Ship it.
I got these distcheck failures with sanlock enabled:
ERROR: files left in build directory after distclean:
./tools/virt-sanlock-cleanup
./src/locking/qemu-sanlock.conf
* src/Makefile.am (DISTCLEANFILES) [HAVE_SANLOCK]: Clean built
file.
* tools/Makefile.am (DISTCLEANFILES): Likewise.
The libvirtd daemon had a few crude system tap probes. Some of
these were broken during the RPC rewrite. The new modular RPC
code is structured in a way that allows much more effective
tracing. Instead of trying to hook up the original probes,
define a new set of probes for the RPC and event code.
The master probes file is now src/probes.d. This contains
probes for virNetServerClientPtr, virNetClientPtr, virSocketPtr
virNetTLSContextPtr and virNetTLSSessionPtr modules. Also add
probes for the poll event loop.
The src/dtrace2systemtap.pl script can convert the probes.d
file into a libvirt_probes.stp file to make use from systemtap
much simpler.
The src/rpc/gensystemtap.pl script can generate a set of
systemtap functions for translating RPC enum values into
printable strings. This works for all RPC header enums (program,
type, status, procedure) and also the authentication enum
The PROBE macro will automatically generate a VIR_DEBUG
statement, so any place with a PROBE can remove any existing
manual DEBUG statements.
* daemon/libvirtd.stp, daemon/probes.d: Remove obsolete probing
* daemon/libvirtd.h: Remove probe macros
* daemon/Makefile.am: Remove all probe buildings/install
* daemon/remote.c: Update authentication probes
* src/dtrace2systemtap.pl, src/rpc/gensystemtap.pl: Scripts
to generate STP files
* src/internal.h: Add probe macros
* src/probes.d: Master list of probes
* src/rpc/virnetclient.c, src/rpc/virnetserverclient.c,
src/rpc/virnetsocket.c, src/rpc/virnettlscontext.c,
src/util/event_poll.c: Insert probe points, removing any
DEBUG statements that duplicate the info
Pull the call to gnutls_x509_crt_get_dn up into a higher function
so that the 'dname' variable will be available for probe points
* src/rpc/virnettlscontext.c: Pull gnutls_x509_crt_get_dn up
one level
If we receive an error on the stream, set the EOF marker so
that any further (bogus) incoming data is dropped.
* src/rpc/virnetclientstream.c: Set EOF on stream
To avoid static linking libvirtd to the RPC server code, which
then prevents sane introduction of DTrace probes, put it all
in the libvirt.so, and export it
* daemon/Makefile.am: Don't link to RPC libraries
* src/Makefile.am: Link all RPC libraries to libvirt.so
* src/libvirt_private.syms: Export all RPC functions
It was fairly trivial to return snapshot listing based on a
point in the hierarchy, rather than starting at all roots.
* src/esx/esx_driver.c (esxDomainSnapshotNumChildren)
(esxDomainSnapshotListChildrenNames): New functions.
Not too hard to wire up. The trickiest part is realizing that
listing children of a snapshot cannot use SNAPSHOT_LIST_ROOTS,
and that we overloaded that bit to also mean SNAPSHOT_LIST_DESCENDANTS;
we use that bit to decide which iteration to use, but don't want
the existing counting/listing functions to see that bit.
* src/conf/domain_conf.h (virDomainSnapshotObjListNumFrom)
(virDomainSnapshotObjListGetNamesFrom): New prototypes.
* src/conf/domain_conf.c (virDomainSnapshotObjListNumFrom)
(virDomainSnapshotObjListGetNamesFrom): New functions.
* src/libvirt_private.syms (domain_conf.h): Export them.
* src/qemu/qemu_driver.c (qemuDomainSnapshotNumChildren)
(qemuDomainSnapshotListChildrenNames): New functions.
Very mechanical. I'm so glad we've automated the generation of things,
compared to what it was in 0.8.x days, where this would be much longer.
* src/remote/remote_protocol.x
(REMOTE_PROC_DOMAIN_SNAPSHOT_NUM_CHILDREN)
(REMOTE_PROC_DOMAIN_SNAPSHOT_LIST_CHILDREN_NAMES): New rpcs.
(remote_domain_snapshot_num_children_args)
(remote_domain_snapshot_num_children_ret)
(remote_domain_snapshot_list_children_names_args)
(remote_domain_snapshot_list_children_names_ret): New structs.
* src/remote/remote_driver.c (remote_driver): Use it.
* src/remote_protocol-structs: Update.
The previous API addition allowed traversal up the hierarchy;
this one makes it easier to traverse down the hierarchy.
In the python bindings, virDomainSnapshotNumChildren can be
generated, but virDomainSnapshotListChildrenNames had to copy
from the hand-written example of virDomainSnapshotListNames.
* include/libvirt/libvirt.h.in (virDomainSnapshotNumChildren)
(virDomainSnapshotListChildrenNames): New prototypes.
(VIR_DOMAIN_SNAPSHOT_LIST_DESCENDANTS): New flag alias.
* src/libvirt.c (virDomainSnapshotNumChildren)
(virDomainSnapshotListChildrenNames): New functions.
* src/libvirt_public.syms: Export them.
* src/driver.h (virDrvDomainSnapshotNumChildren)
(virDrvDomainSnapshotListChildrenNames): New callbacks.
* python/generator.py (skip_impl, nameFixup): Update lists.
* python/libvirt-override-api.xml: Likewise.
* python/libvirt-override.c
(libvirt_virDomainSnapshotListChildrenNames): New wrapper function.
On xen 4.1 I observed configurations that look like:
(image
(hvm
(kernel '')
(loader '/foo/bar')
))
The kernel element is there but unset. This leads to an empty <kernel/>
element in the XML and even worse makes us skip the boot order parsing
and therefore not emit a <boot device='$dev>'/> element which breaks CD
booting.
otherwise a missing UUID in a domain config just shows:
error: An error occurred, but the cause is unknown
Now we have:
error: configuration file syntax error: config value uuid was missing
* src/storage/storage_backend_logical.c:
If a logical vol is created as striped. (e.g. --stripes 3),
the "device" field of lvs output will have multiple fileds which are
seperated by comma. Thus the RE we write in the codes will not
work well anymore. E.g. (lvs output for a stripped vol, uses "#" as
seperator here):
test_stripes##fSLSZH-zAS2-yAIb-n4mV-Al9u-HA3V-oo9K1B#\
/dev/sdc1(10240),/dev/sdd1(0)#42949672960#4194304
The RE we use:
const char *regexes[] = {
"^\\s*(\\S+),(\\S*),(\\S+),(\\S+)\\((\\S+)\\),(\\S+),([0-9]+),?\\s*$"
};
Also the RE doesn't match the "devices" field of striped vol properly,
it contains multiple "device path" and "offset".
This patch mainly does:
1) Change the seperator into "#"
2) Change the RE for "devices" field from "(\\S+)\\((\\S+)\\)"
into "(\\S+)".
3) Add two new options for lvs command, (segtype, stripes)
4) Extend the RE to match the value for the two new fields.
5) Parse the "devices" field seperately in virStorageBackendLogicalMakeVol,
multiple "extents" info are generated if the vol is striped. The
number of "extents" is equal to the stripes number of the striped vol.
A incidental fix: (virStorageBackendLogicalMakeVol)
Free "vol" if it's new created and there is error.
Demo on striped vol with the patch applied:
% virsh vol-dumpxml /dev/test_vg/vol_striped2
<volume>
<name>vol_striped2</name>
<key>QuWqmn-kIkZ-IATt-67rc-OWEP-1PHX-Cl2ICs</key>
<source>
<device path='/dev/sda5'>
<extent start='79691776' end='88080384'/>
</device>
<device path='/dev/sda6'>
<extent start='62914560' end='71303168'/>
</device>
</source>
<capacity>8388608</capacity>
<allocation>8388608</allocation>
<target>
<path>/dev/test_vg/vol_striped2</path>
<permissions>
<mode>0660</mode>
<owner>0</owner>
<group>6</group>
<label>system_u:object_r:fixed_disk_device_t:s0</label>
</permissions>
</target>
</volume>
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=727474
If parsing qemu command line fails (e.g. because of non-existing
process number supplied), we jump to cleanup label where we free
pidfile. Therefore it needs to be initialized. Otherwise we free
random pointer.
Coverity complained that 4 out of 5 callers to virJSONValueObjectGetBoolean
checked for errors. But we documented that we don't care in this case.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONGetBlockInfo): Use
ignore_value.
Detected by Coverity. We want to increment the size_t counter,
not the pointer to the counter. Bug present since 5f5c6fde (0.9.5).
* src/lxc/lxc_controller.c (lxcSetupLoopDevices): Use correct
precedence.
If we send back an unknown program error for async messages,
we will confuse the client because they only expect replies
for method calls. Just log & drop any invalid async messages
* src/rpc/virnetserver.c: Don't send error for async messages
Commit 597fe3cee6 accidentally
introduced a deadlock when reporting an unknown RPC program.
The virNetServerDispatchNewMessage method is called with
the client locked, and must therefore not attempt to send
any RPC messages back to the client. Only once the incoming
message is passed off to the virNetServerHandleJob worker
is it safe to start sending messages back
* src/rpc/virnetserver.c: Delay checking for unknown RPC
program until in worker thread
Redefining disk-only snapshot xml should work even if the user
did not explicitly pass VIR_DOMAIN_SNAPSHOT_CREATE_DISK_ONLY;
the flag is only required for conditions where the <state>
subelement is not already present in parsing (that is, defining
a new snapshot).
Also, fix the error code of some user-visible errors (the remaining
VIR_ERR_INTERNAL_ERROR should not be user-visible, since parsing
of <active> is only done from internal code).
* src/conf/domain_conf.c (virDomainSnapshotDefParseString): Allow
disks during redefinition of disk snapshot.
I am getting this failure with 'make distcheck':
GEN ../../src/remote_protocol-structs
/bin/sh: ../../src/remote_protocol-structs-t: Permission denied
make[4]: *** [../../src/remote_protocol-structs] Error 1
since it attempts a sub-run of a VPATH 'make check' where $(srcdir)
is intentionally read-only. I'm not sure which commit introduced
the problem, although I suspect it was around 62dee6f when I
refactored protocol struct checking to be more powerful.
$(@F) is required by POSIX, and although it is not yet portable
to all make implementations, we already require GNU make.
* src/Makefile.am (PDWTAGS): Generate temp file into current
directory, since $(srcdir) is read-only during distcheck.
Previously libvirt's disk device XML only had a single attribute,
error_policy, to control both read and write error policy, but qemu
has separate options for controlling read and write. In one case
(enospc) a policy is allowed for write errors but not read errors.
This patch adds a separate attribute that sets only the read error
policy. If just error_policy is set, it will apply to both read and
write error policy (previous behavior), but if the new rerror_policy
attribute is set, it will override error_policy for read errors only.
Possible values for rerror_policy are "stop", "report", and "ignore"
("report" is the qemu-controlled default for rerror_policy when
error_policy isn't specified).
For consistency, the value "report" has been added to the possible
values for error_policy as well.
commit 12062ab set rerror=ignore when error_policy="enospace" was
selected (since the rerror option in qemu doesn't accept "enospc", as
the werror option does).
After that patch was already pushed, Paolo Bonzini noticed it and
commented that leaving rerror at the default ("report") would be a
better choice. This patch corrects the problem - if error_policy =
"enospace" is given, rerror is left off the qemu commandline,
effectively setting it to "report". For other values, rerror is still
set to match werror.
Additionally, the parsing of error_policy was changed to no longer
erroneously allow "default" as a choice - as with most other
attributes, if you want the default setting, just don't specify an
error_policy.
Finally, two ommissions in the first patch were corrected - a
long-dormant qemuxml2argv test for enospace was enabled, and fixed to
pass, and the argv2xml parser in qemu_command.c was updated to
recognize the different spelling on the qemu commandline.
Now that RHEL 6.2 Beta is out, it would be nice to test multifunction
devices on that platform. This changes things so that the multifunction
cap bit can be set in two different ways: by version comparison (needed
for qemu 0.13 which lacked a -device query), and by -device query
(provided by qemu.git and backported to the RHEL beta build of
qemu-kvm which still claims to be a modified 0.12, and therefore needed
for RHEL).
* src/qemu/qemu_capabilities.c (qemuCapsParseDeviceStr): Allow
second method of setting multifunction cap bit.
* tests/qemuhelptest.c (mymain): Test it.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta: New file.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta-device: Likewise.
If using one of the new non-NAT/routed virtual network
configurations, the LXC driver would not know how to
setup the VETH devices. Adding in calls to setup the
"actual" network configuration at VM startup and cleanup
when shutting down fixes this.
* src/lxc/lxc_driver.c: Setup/cleanup actual net devs
Implements the documentation for snapshot revert vs. force.
Part of the patch tightens existing behavior (previously, reverting
to an old snapshot without <domain> was blindly attempted, now it
requires force), while part of it relaxes behavior (previously, it
was not possible to revert an active domain to an ABI-incompatible
active snapshot, now force allows this transition).
* src/qemu/qemu_driver.c (qemuDomainRevertToSnapshot): Check for
risky situations, and allow force to get past them.
Once we know which set of disks belong to a snapshot, reverting or
deleting that snapshot should visit just those disks, rather than
also visiting disks that were hot-plugged in the meantime or
skipping disks that were hot-unplugged in the meantime.
* src/qemu/qemu_domain.c (qemuDomainSnapshotForEachQcow2): Use
snapshot domain details when available. Avoid NULL deref.
Although reverting to a snapshot is a form of data loss, this is
normally expected. However, there are two cases where additional
surprises (failure to run the reverted state, or a break in
connectivity to the domain) can come into play. Requiring extra
acknowledgment in these cases will make it less likely that
someone can get into an unrecoverable state due to a default revert.
Also create a new error code, so users can distinguish when forcing
would make a difference, rather than having to blindly request force.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_REVERT_FORCE):
New flag.
* src/libvirt.c (virDomainRevertToSnapshot): Document it.
* include/libvirt/virterror.h (VIR_ERR_SNAPSHOT_REVERT_RISKY): New
error value.
* src/util/virterror.c (virErrorMsg): Implement it.
* tools/virsh.c (cmdDomainSnapshotRevert): Add --force to virsh.
* tools/virsh.pod (snapshot-revert): Document it.
Commit 9f5e53e introduced the ability to filter snapshots to
just roots, but it was never implemented for VBox until now.
The VBox implementation prohibits deletion of a snapshot with
multiple children. Hence, there can only be at most one root,
which is found by searching for the snapshot with a NULL uuid.
Prior to 4.0, snapshotGet looked up by UUID, and snapshotFind
looked up by name; after that point, snapshotGet disappeared
and snapshotFind handles uuid or name.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotNum)
(vboxDomainSnapshotListNames): Implement limiting list to root.
Qemu driver tries to update balloon data in virDomainGetInfo and if it
can't do so because there is another monitor job running, it just
reports what's known in domain def. However, if there was no job running
but getting the data from qemu fails, we would fail the whole API. This
doesn't make sense. Let's make the failure nonfatal.
No need to request the parent of a snapshot if we aren't going to use it.
* src/esx/esx_vi.c (esxVI_GetSnapshotTreeByName): Make parent
optional.
* src/esx/esx_driver.c (esxDomainSnapshotCreateXML)
(esxDomainSnapshotLookupByName, esxDomainRevertToSnapshot)
(esxDomainSnapshotDelete): Simplify accordingly.
Commit 9f5e53e introduced the ability to filter snapshots to
just roots, but it was never implemented for ESX until now.
* src/esx/esx_vi.h (esxVI_GetNumberOfSnapshotTrees)
(esxVI_GetSnapshotTreeNames): Add parameter.
* src/esx/esx_vi.c (esxVI_GetNumberOfSnapshotTrees)
(esxVI_GetSnapshotTreeNames): Allow choice of recursion or not.
* src/esx/esx_driver.c (esxDomainSnapshotNum)
(esxDomainSnapshotListNames): Use it to limit to roots.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=730909
When support for setting the qemu disk error policy to "enospc" was
added, it was inadvertently spelled "enospace". This patch corrects
that on the qemu commandline (while retaining the "enospace" spelling
for libvirt's XML).
Also, while examining the qemu source, I found that "enospc" is not
allowed for the read error policy, only for write error policy (makes
sense). Since libvirt currently only has a single error policy
setting, when "enospace" is selected, the read error policy is set to
"ignore".
Destination libvirtd remembers the original name in the prepare phase
and clears it in the finish phase. The original name is used when
comparing domain name in migration cookie.
When booting a virtual machine with a kernel/initrd it is possible
to pass command line arguments using the <cmdline>...args...</cmdline>
element in the guest XML. These appear to the kernel / init process
in /proc/cmdline.
When booting a container we do not have a custom /proc/cmdline,
but we can easily set an environment variable for it. Ideally
we could pass individual arguments to the init process as a
regular set of 'char *argv[]' parameters, but that would involve
libvirt parsing the <cmdline> XML text. This can easily be added
later, even if we add the env variable now
* docs/drvlxc.html.in: Document env variables passed to LXC
* src/conf/domain_conf.c: Add <cmdline> to be parsed for
guests of type='exe'
* src/lxc/lxc_container.c: Set LIBVIRT_LXC_CMDLINE env var
This patch is a fix for:
https://bugzilla.redhat.com/show_bug.cgi?id=743176
which was discovered by Dan Berrange while making bandwidth
configuration work for LXC guests.
Background: Although virtportprofile data from a network portgroup is
only applicable for direct mode interfaces, the code that copies
bandwidth data from the portgroup was also only being executed in the
case of direct mode interfaces. The result was that interfaces using
traditional virtual networks (forward mode='nat|route|none'), and
those using a host bridge for forwarding, would not pick up bandwidth
data from a portgroup defined in the network.
This patch moves that code outside the conditional, so that bandwidth
information is *alway* copied from the appropriate portgroup (unless
the <interface> definition itself already has bandwidth information,
which would take precedence over what's in the portgroup anyway).
Code altered so that it is consistent with the associated comment. The
'autoconf' variable is forced to zero.
Signed-off-by: Neil Wilson <neil@brightbox.co.uk>
Do not crash if virStreamFinish is called after error.
==11000== Invalid read of size 4
==11000== at 0x373A8099A0: pthread_mutex_lock (pthread_mutex_lock.c:51)
==11000== by 0x4C7CADE: virMutexLock (threads-pthread.c:85)
==11000== by 0x4D57C31: virNetClientStreamRaiseError (virnetclientstream.c:203)
==11000== by 0x4D385E4: remoteStreamFinish (remote_driver.c:3541)
==11000== by 0x4D182F9: virStreamFinish (libvirt.c:14157)
==11000== by 0x40FDC4: cmdScreenshot (virsh.c:3075)
==11000== by 0x42BA40: vshCommandRun (virsh.c:14922)
==11000== by 0x42ECCA: main (virsh.c:16381)
==11000== Address 0x59b86c0 is 16 bytes inside a block of size 216 free'd
==11000== at 0x4A06928: free (vg_replace_malloc.c:427)
==11000== by 0x4C69E2B: virFree (memory.c:310)
==11000== by 0x4D57B56: virNetClientStreamFree (virnetclientstream.c:184)
==11000== by 0x4D3DB7A: remoteDomainScreenshot (remote_client_bodies.h:1812)
==11000== by 0x4CFD245: virDomainScreenshot (libvirt.c:2903)
==11000== by 0x40FB73: cmdScreenshot (virsh.c:3029)
==11000== by 0x42BA40: vshCommandRun (virsh.c:14922)
==11000== by 0x42ECCA: main (virsh.c:16381)
When support for was added for PCI multifunction cards (in commit
9f8baf, first included in libvirt 0.9.3), it was done by always
turning on the multifunction bit for all PCI devices. Since that time
it has been realized that this is not an ideal solution, and that the
multifunction bit must be selectively turned on. For example, see
https://bugzilla.redhat.com/show_bug.cgi?id=728174
and the discussion before and after
https://www.redhat.com/archives/libvir-list/2011-September/msg01036.html
This patch modifies multifunction support so that the multifunction=on
option is only added to the qemu commandline for a device if its PCI
<address> definition has the attribute "multifunction='on'", e.g.:
<address type='pci' domain='0x0000' bus='0x00'
slot='0x04' function='0x0' multifunction='on'/>
In practice, the multifunction bit should only be turned on if
function='0' AND other functions will be used in the same slot - it
usually isn't needed for functions 1-7 (although there are apparently
some exceptions, e.g. the Intel X53 according to the QEMU source
code), and should never be set if only function 0 will be used in the
slot. The test cases have been changed accordingly to illustrate.
With this patch in place, if a user attempts to assign multiple
functions in a slot without setting the multifunction bit for function
0, libvirt will issue an error when the domain is defined, and the
define operation will fail. In the future, we may decide to detect
this situation and automatically add multifunction=on to avoid the
error; even then it will still be useful to have a manual method of
turning on multifunction since, as stated above, there are some
devices that excpect it to be turned on for all functions in a slot.
A side effect of this patch is that attempts to use the same PCI
address for two different devices will now log an error (previously
this would cause the domain define operation to fail, but there would
be no log message generated). Because the function doing this log was
almost completely rewritten, I didn't think it worthwhile to make a
separate patch for that fix (the entire patch would immediately be
obsoleted).
If the regexes supported (?:pvs)?, then we could handle this by
optionally matching but not returning the initial command name. But it
doesn't. So add a new char* argument to
virStorageBackendRunProgRegex(). If that argument is NULL then we act
as usual. Otherwise, if the string at that argument is found at the
start of a returned line, we drop that before running the regex.
With this patch, virt-manager shows me lvs with command_names 1 or 0.
The definitions of PVS_BASE etc may want to be moved into the configure
scripts (though given how PVS is found, IIUC that could only happen if
pvs was a link to pvs_real), but in any case no sense dealing with that
until we're sure this is an ok way to handle it.
Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, qemuDomainGetXMLDesc and qemudDomainGetInfo check for
outstanding synchronous job before (eventual) monitor entering.
However, there can be already async job set, e.g. migration.
Before, URIs such as hyperv+ssh:// have been declined by the Hyper-V
driver resulting in the remote driver trying to connect to an
non-existing libvirtd.
Now such URIs trigger an error in the yper-V driver suggesting to
try again without the transport part in the scheme.
Before, URIs such as esx+ssh:// have been declined by the ESX driver
resulting in the remote driver trying to connect to an non-existing
libvirtd.
Now such URIs trigger an error in the ESX driver suggesting to try
again without the transport part in the scheme.
If the daemon is restarted so we reconnect to monitor, cdrom media
can be ejected. In that case we don't want to show it in domain xml,
or require it on migration destination.
To check for disk status use 'info block' monitor command.
* src/qemu/qemu_migration.c: if 'vmdef' is NULL, the function
virDomainSaveConfig still dereferences it, it doesn't make
sense, so should add return value check to make sure 'vmdef'
is non-NULL before calling virDomainSaveConfig, in addition,
in order to debug later, also should record error information
into log.
Signed-off-by: Alex Jia <ajia@redhat.com>
First hypervisor implementation of the new API.
Allows 'virsh snapshot-list --tree' to be more efficient.
* src/qemu/qemu_driver.c (qemuDomainSnapshotGetParent): New
function.
Mostly straight-forward, although this is the first API that
returns a new snapshot based on a snapshot rather than a domain.
* src/remote/remote_protocol.x
(REMOTE_PROC_DOMAIN_SNAPSHOT_GET_PARENT): New rpc.
(remote_domain_snapshot_get_parent_args)
(remote_domain_snapshot_get_parent_ret): New structs.
* src/rpc/gendispatch.pl: Adjust generator.
* src/remote/remote_driver.c (remote_driver): Use it.
* src/remote_protocol-structs: Update.
Although a client can already obtain a snapshot's parent by
dumping and parsing the xml, then doing a snapshot lookup by
name, it is more efficient to get the parent in one step, which
in turn will make operations that must traverse a snapshot
hierarchy easier to perform.
* include/libvirt/libvirt.h.in (virDomainSnapshotGetParent):
Declare.
* src/libvirt.c (virDomainSnapshotGetParent): New function.
* src/libvirt_public.syms: Export it.
* src/driver.h (virDrvDomainSnapshotGetParent): New callback.
This patch fixes the regression with using named pipes for qemu serial
devices noted in:
https://bugzilla.redhat.com/show_bug.cgi?id=740478
The problem was that, while new code in libvirt looks for a single
bidirectional fifo of the name given in the config, then relabels that
and continues without looking for / relabelling the two unidirectional
fifos named ${name}.in and ${name}.out, qemu looks in the opposite
order. So if the user had naively created all three fifos, libvirt
would relabel the bidirectional fifo to allow qemu access, but qemu
would attempt to use the two unidirectional fifos and fail (because it
didn't have proper permissions/rights).
This patch changes the order that libvirt looks for the fifos to match
what qemu does - first it looks for the dual fifos, then it looks for
the single bidirectional fifo. If it finds the dual unidirectional
fifos first, it labels/chowns them and ignores any possible
bidirectional fifo.
(Note commit d37c6a3a (which first appeared in libvirt-0.9.2) added
the code that checked for a bidirectional fifo. Prior to that commit,
bidirectional fifos for serial devices didn't work because libvirt
always required the ${name}.(in|out) fifos to exist, and qemu would
always prefer those.
If a domain started with -no-shutdown shuts down while libvirtd is not
running, it will be seen as paused when libvirtd reconnects to it. Use
the paused reason to detect if a domain was stopped because of shutdown
and finish the process just as if a SHUTDOWN event is delivered from
qemu.
The AppArmor security driver adds only the path specified in the domain
XML for character devices of type 'pipe'. It should be using <path>.in
and <path>.out. We do this by creating a new vah_add_file_chardev() and
use it for char devices instead of vah_add_file(). Also adjust
valid_path() to accept S_FIFO (since qemu chardevs of type 'pipe' use
fifos). This is https://launchpad.net/bugs/832507
This patch was made in response to:
https://bugzilla.redhat.com/show_bug.cgi?id=738095
In short, qemu's default for the rombar setting (which makes the
firmware ROM of a PCI device visible/not on the guest) was previously
0 (not visible), but they recently changed the default to 1
(visible). Unfortunately, there are some PCI devices that fail in the
guest when rombar is 1, so the setting must be exposed in libvirt to
prevent a regression in behavior (it will still require explicitly
setting <rom bar='off'/> in the guest XML).
rombar is forced on/off by adding:
<rom bar='on|off'/>
inside a <hostdev> element that defines a PCI device. It is currently
ignored for all other types of devices.
At the moment there is no clean method to determine whether or not the
rombar option is supported by QEMU - this patch uses the advice of a
QEMU developer to assume support for qemu-0.12+. There is currently a
patch in the works to put this information in the output of "qemu-kvm
-device pci-assign,?", but of course if we switch to keying off that,
we would lose support for setting rombar on all the versions of qemu
between 0.12 and whatever version gets that patch.
SIGTERM handling for -no-shutdown is already fixed in qemu git and
libvirt can safely use it. The downside is that 0.15.50 version of qemu
can be any qemu compiled from git, even that without the fix for
SIGTERM. However, I think this patch is worth it since excluding 0.15.50
from the check makes testing current qemu with libvirt much easier and
someone running qemu from git should be able to rebuild fixed qemu from
git if they hit the problem with a hang on shutdown.
* src/storage/storage_driver.c: As virStorageVolLookupByPath lookups
all the pool objs of the drivers, breaking when failing on getting
the stable path of the pool will just breaks the whole lookup process,
it can cause the API fails even if the vol exists indeed. It won't get
any benefit. This patch is to fix it.
QEMU 0.13 introduced cache=unsafe for -drive, this patch exposes
it in the libvirt layer.
* Introduced a new QEMU capability flag ($prefix_CACHE_UNSAFE),
as even if $prefix_CACHE_V2 is set, we can't know if unsafe
is supported.
* Improved the reliability of qemu cache type detection.
commit 984840a2c2 removed the
notification of waiting calls when VIR_NET_CONTINUE messages
arrive. This was to fix the case of a virStreamAbort() call
being prematurely notified of completion.
The problem is that sometimes there are dummy calls from a
virStreamRecv() call waiting that *do* need to be notified.
These dummy calls should have a status VIR_NET_CONTINUE. So
re-add the notification upon VIR_NET_CONTINUE, but only if
the waiter also has a status of VIR_NET_CONTINUE.
* src/rpc/virnetclient.c: Notify waiting call if stream data
arrives
* src/rpc/virnetclientstream.c: Mark dummy stream read packet
with status VIR_NET_CONTINUE
If a domain has inactive XML we want to transfer it to destination
when migrating with VIR_MIGRATE_PERSIST_DEST. In order to harm
the migration protocol as least as possible, a optional cookie was
chosen.
The previous patch removed all snapshots, but not the directory
where the snapshots lived, which is still a form of stale data.
* src/qemu/qemu_domain.c (qemuDomainRemoveInactive): Wipe any
snapshot directory.
Commit 282fe1f0 documented that transient domains will auto-delete
any snapshot metadata when the last reference to the domain is
removed, and that management apps are in charge of grabbing any
snapshot metadata prior to that point. However, this was not
actually implemented for qemu until now.
* src/qemu/qemu_driver.c (qemudDomainCreate)
(qemuDomainDestroyFlags, qemuDomainSaveInternal)
(qemudDomainCoreDump, qemuDomainRestoreFlags, qemudDomainDefine)
(qemuDomainUndefineFlags, qemuDomainMigrateConfirm3)
(qemuDomainRevertToSnapshot): Clean up snapshot metadata.
* src/qemu/qemu_migration.c (qemuMigrationPrepareAny)
(qemuMigrationPerformJob, qemuMigrationPerformPhase)
(qemuMigrationFinish): Likewise.
* src/qemu/qemu_process.c (qemuProcessHandleMonitorEOF)
(qemuProcessReconnect, qemuProcessReconnectHelper)
(qemuProcessAutoDestroyDom): Likewise.
This patch is mostly code motion - moving some functions out
of qemu_driver and into qemu_domain so they can be reused by
multiple qemu_* files (since qemu_driver.h must not grow).
It also adds a new helper function, qemuDomainRemoveInactive,
which will be used in the next patch.
* src/qemu/qemu_domain.h (qemuFindQemuImgBinary)
(qemuDomainSnapshotWriteMetadata, qemuDomainSnapshotForEachQcow2)
(qemuDomainSnapshotDiscard, qemuDomainSnapshotDiscardAll)
(qemuDomainRemoveInactive): New prototypes.
(struct qemu_snap_remove): New struct.
* src/qemu/qemu_domain.c (qemuDomainRemoveInactive)
(qemuDomainSnapshotDiscardAllMetadata): New functions.
(qemuFindQemuImgBinary, qemuDomainSnapshotWriteMetadata)
(qemuDomainSnapshotForEachQcow2, qemuDomainSnapshotDiscard)
(qemuDomainSnapshotDiscardAll): Move here...
* src/qemu/qemu_driver.c (qemuFindQemuImgBinary)
(qemuDomainSnapshotWriteMetadata, qemuDomainSnapshotForEachQcow2)
(qemuDomainSnapshotDiscard, qemuDomainSnapshotDiscardAll): ...from
here.
(qemuDomainUndefineFlags): Update caller.
* src/conf/domain_conf.c (virDomainRemoveInactive): Doc fixes.
Commit 19f8c98 introduced VIR_DOMAIN_UNDEFINE_SNAPSHOTS_METADATA,
with the intent that omitting the flag makes undefine fail, and
including the flag deletes metadata. But it used the wrong logic.
Also, hoist the transient domain sooner, so that we don't
accidentally remove metadata of a transient domain.
* src/qemu/qemu_driver.c (qemuDomainUndefineFlags): Check correct
flag value.
Detected by Coverity. The only way to get to error_unlink is if
path was successfully assigned, so the if was useless. Meanwhile,
there was a return statement that did not free path.
* src/locking/lock_driver_sanlock.c
(virLockManagerSanlockSetupLockspace): Fix mem-leak, and drop
useless if.
Related #BZ: https://bugzilla.redhat.com/show_bug.cgi?id=702260.
There are two problems described in the BZ:
1) "Can't remove open logical volume".
2) "Unable to deactivate logical volume "foo""
This patch just intends to fix 2), as 1) is expected if the vol
is still used by something, and you never known if "lvchange -an"
will fail or not either (sometime, it will succeed, sometimes not).
We'd better not look for trouble, :-)
For 2), that's caused by race between lvremove and udev event handling,
the only workable way now is to wait the events handling are finished,
though it might introduce latencies, as "udevadmin settle" exits
after *all* events are handled, it's the only way we can fix
the racing in libvirt layer.
See https://bugzilla.redhat.com/show_bug.cgi?id=570359 for more
details.
* src/qemu/qemu_process.c: Taking if (qemuDomainObjEndJob(driver, obj) == 0)
true branch then 'obj' is NULL, virDomainObjIsActive(obj) and
virDomainObjUnref(obj) will dereference NULL pointer.
Signed-off-by: Alex Jia <ajia@redhat.com>
Once virDomainReboot is called for a domain, guest OS initiated shutdown
would always result in reboot instead of shutdown. Only
virDomainShutdown would actually shutd such domain down. That's because
we forgot to reset fakeReboot flag once we asked the domain to reboot.
The commit that prevents disk corruption on domain shutdown
(96fc478417) causes regression with QEMU
0.14.* and 0.15.* because of a regression bug in QEMU that was fixed
only recently in QEMU git. The affected versions of QEMU do not quit on
SIGTERM if started with -no-shutdown, which we use to implement fake
reboot. Since -no-shutdown tells QEMU not to quit automatically on guest
shutdown, domains started using the affected QEMU cannot be shutdown
properly and stay in a paused state.
This patch disables fake reboot feature on such QEMU by not using
-no-shutdown, which makes shutdown work as expected. However,
virDomainReboot will not work in this case and it will report "Requested
operation is not valid: Reboot is not supported with this QEMU binary".
The next patch will add a syntax check that flags this usage in xen
as awkward - while it was valid memory management, it was very hard
to maintain. Swapping to a more traditional allocation may be a bit
slower, but easier to understand.
* src/xen/xend_internal.c (xenDaemonListDomainsOld): Use two-level
allocation, rather than abusing allocation function.
(xenDaemonLookupByUUID): Update caller.
gcc warns when building libvirt 0.9.5 on a 32-bit machine:
qemu/qemu_migration.c: In function 'qemuMigrationToFile':
qemu/qemu_migration.c:2727:38: error: large integer implicitly truncated to unsigned type [-Woverflow]
* src/qemu/qemu_domain.h (QEMU_DOMAIN_FILE_MIG_BANDWIDTH_MAX): Cap
to long when building for 32-bit platform.
Inexplicably the sanlock code all got placed under the GPLv2-only,
so libvirt's use of sanlock introduces a license incompatibility.
The sanlock developers have now rearranged the code such that there
is a 'sanlock_client.so' which is LGPLv2+ while their daemon remains
GPLv2-only. To use the new client library we need to call the new
sanlock_init and sanlock_align APIs instead of sanlock_direct_init
and sanlock_direct_align. These APIs calls are now routed via the
sanlock daemon, instead of doing direct I/O calls to disk.
For all this we require sanlock >= 1.8
* configure.ac: Check for sanlock_client.so instead of sanlock.so
and fix various comments
* libvirt.spec.in: Mandate sanlock >= 1.8
* src/Makefile.am: Link to -lsanlock_client
* src/locking/lock_driver_sanlock.c: Use sanlock_init and
sanlock_align
Libvirt loads the domain conf from status XML if it's running when
starting up. The problem is there is no record of the original conf.
(dom->newDef is NULL here).
So libvirt won't be able to restore the domain conf to original one
when destroying/shutdown. E.g.
1) attach a device without "--persistent"
2) restart libvirtd
3) destroy domain
4) start domain
One will see the the disk still exists.
This patch is to fix the peoblem by assigning persistent domain conf
to dom->newDef if it's NULL and the domain is running.
Virsh man page lists driver types to be used with attach-device
command, but does not specify that those are usable only with the XEN
Hypervisor.
This patch adds statement, that those options specified are applicable
only on the Xen hypervisor and adds option usable with qemu emulator.
This patch also changes type of error returned by QEMU driver if the
user specifies incompatible driver type from VIR_ERR_INTERNAL_ERROR to
VIR_ERR_CONFIG_UNSUPPORTED.
* src/vmx/vmx.c: fix memory leak, 'def' has a initial value 'NULL', so
'goto cleanup' is perfected instead of adding a virConfFree before
'return NULL'.
Signed-off-by: Alex Jia <ajia@redhat.com>
Leak present since introduction of remoteDomainBuildEventGraphics
in commit 987e31e.
* src/remote/remote_driver.c: fix memory leak.
Signed-off-by: Alex Jia <ajia@redhat.com>
For all types of disks other than qcow2, we were requesting that
SELinux labeling visit the new file as if it were qcow2, which
means labeling would try to find the backing files of an empty file.
And for a pre-existing qcow2 disk, we were passing NULL, which meant
that labelling tried to probe the file type (and if probing is
disabled, per the default qemu.conf, this made snapshots fail).
What we really want is to make SELinux labeling visit the new
file as raw; it will later be converted to qcow2 if qemu successfully
made the snapshot.
* src/qemu/qemu_driver.c
(qemuDomainSnapshotCreateSingleDiskActive): Force SELinux labeling
to avoid probe of new file.
For external snapshots to be useful on persistent domains, we must
alter the persistent definition alongside the running definition.
Thanks to the possibility of disk hotplug as well as of edits that
only affect the persistent xml, we can't assume that vm->def and
vm->newDef have the same disk at the same index, so we can only
update the persistent copy if the device destination matches up.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateDiskActive)
(qemuDomainSnapshotCreateSingleDiskActive): Also affect newDef, if
present.
When libvirt calls virInitialize it creates a thread local
for the virErrorPtr storage, and registers a callback to
cleanup memory when a thread exits. When libvirt is dlclose()d
or otherwise made non-resident, the callback function is
removed from memory, but the thread local may still exist
and if a thread later exists, it will invoke the callback
and SEGV. There may also be other thread locals with callbacks
pointing to libvirt code, so it is in general never safe to
unload libvirt.so from memory once initialized.
To allow dlclose() to succeed, but keep libvirt.so resident
in memory, link with '-z nodelete'. This issue was first
found with the libvirt CIM provider, but can potentially
hit many of the dynamic language bindings which all ultimately
involve dlopen() in some way, either on libvirt.so itself,
or on the glue code for the binding which in turns links
to libvirt
* configure.ac, src/Makefile.am: Ensure libvirt.so is linked
with -z nodelete
* cfg.mk, .gitignore, tests/Makefile.am, tests/shunloadhelper.c,
tests/shunloadtest.c: A test case to unload libvirt while
a thread is still running.
Qemu sends STOP event as part of the shutdown process. Detect such STOP
event and consider shutdown to be reason of emitting such event. That's
the best we can do until qemu provides us the reason directly in STOP
event. This allows us to report shutdown reason for paused state so that
apps can detect domains that failed to finish the shutdown process
(e.g., because qemu is buggy and doesn't exit on SIGTERM or it is
blocked in flushing disk buffers).
Ever since we introduced fake reboot, we call qemuProcessKill as a
reaction to SHUTDOWN event. Unfortunately, qemu doesn't guarantee it
flushed all internal buffers before sending SHUTDOWN, in which case
killing the process forcibly may result in (virtual) disk corruption.
By sending just SIGTERM without SIGKILL we give qemu time to to flush
all buffers and exit. Once qemu exits, we will see an EOF on monitor
connection and tear down the domain. In case qemu ignores SIGTERM or
just hangs there, the process stays running but that's not any different
from a possible hang anytime during the shutdown process so I think it's
just fine.
Also qemu (since 0.14 until it's fixed) has a bug in SIGTERM processing
which causes it not to exit but instead send new SHUTDOWN event and keep
waiting. I think the best we can do is to ignore duplicate SHUTDOWN
events to avoid a SHUTDOWN-SIGTERM loop and leave the domain in paused
state.
When a domain is rebooted using libvirt API, we use fake reboot
consisting of shutting down and resetting the domain. Thus we see a
SHUTDOWN event and set gotShutdown flag. But we never reset it back and
if the domain crashes after it was rebooted this way, we consider it was
a normal shutdown and not a crash.
Commit 4454a9efc7 changed shutoff reason
from VIR_DOMAIN_SHUTOFF_CRASHED to VIR_DOMAIN_SHUTOFF_FAILED in case we
see an unexpected EOF on monitor connection. But FAILED reason is
dedicated for domains that fail to start. CRASHED reason is the right
one to use in this situation.
Libvirt special-cases a specific VIR_ERR_RPC from the remote driver
back into VIR_ERR_NO_SUPPORT on the client, so that clients can
handle missing rpc functions the same whether the hypervisor driver
is local or remote. However, commit c1b22644 introduced a regression:
VIR_FROM_THIS changed from VIR_FROM_REMOTE to VIR_FROM_RPC, so the
special casing no longer works if the server uses the newer error
domain.
* src/rpc/virnetclientprogram.c
(virNetClientProgramDispatchError): Also cater to 0.9.3 and newer.
This patch fixes the bug shown in bugzilla 738778. It's not an nwfilter problem but a connection sharing / closure issue.
https://bugzilla.redhat.com/show_bug.cgi?id=738778
Depending on the speed / #CPUs of the machine you are using you may not see this bug all the time.
* conf/domain_conf.c: allocate memory to def->redirdevs in
virDomainDefParseXML such as VIR_ALLOC_N(def->redirdevs, n),
however, virDomainDefFree(def) hasn't released these memory.
* Detected in valgrind run:
==19820== 209 (16 direct, 193 indirect) bytes in 1 blocks are definitely lost in loss record 25 of 26
==19820== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==19820== by 0x4A13AF: virAllocN (memory.c:129)
==19820== by 0x4D4A0E: virDomainDefParseXML (domain_conf.c:7258)
==19820== by 0x4D4C93: virDomainDefParseNode (domain_conf.c:7512)
==19820== by 0x4D562F: virDomainDefParse (domain_conf.c:7465)
==19820== by 0x415863: testCompareXMLToXMLFiles (qemuxml2xmltest.c:35)
==19820== by 0x415982: testCompareXMLToXMLHelper (qemuxml2xmltest.c:80)
==19820== by 0x416D31: virtTestRun (testutils.c:140)
==19820== by 0x415604: mymain (qemuxml2xmltest.c:192)
==19820== by 0x416437: virtTestMain (testutils.c:689)
==19820== by 0x3CA7A1ECDC: (below main) (in /lib64/libc-2.12.so)
==19820==
==19820== LEAK SUMMARY:
==19820== definitely lost: 16 bytes in 1 blocks
==19820== indirectly lost: 193 bytes in 5 blocks
==19820== possibly lost: 0 bytes in 0 blocks
==19820== still reachable: 1,054 bytes in 21 blocks
* How to reproduce?
% valgrind -v --leak-check=full ./tests/qemuxml2xmltest
Signed-off-by: Alex Jia <ajia@redhat.com>
Mac OS X 10.6. Snow Leopard and probably other do not provide a mkfs
command to create filesystems. Macro MKFS then remained undefined and
did not provide any substitute, so that build failed on a missing
argument.
Struct virStoragePoolProbeResult was compiled in conditionaly, but
virStorageBackendFileSystemProbe used it unconditionaly. This patch
exempts the struct from conditional include.
Documentation did not specify, that some permissions are required on
target path for coredump for the user running the hypervisor.
Diff to v1:
- reword statements
The new doc text had a few readability issues. Also, the
monitor command text copied a bit too much from the attach case.
* src/libvirt-qemu.c (virDomainQemuMonitorCommand)
(virDomainQemuAttach): Fix typos and grammar.
Adjust qemuMigrationRun() to use migMaxBandwidth in qemuDomainObjPrivate
structure when setting qemu migration speed. Caller-specified 'resource'
parameter overrides migMaxBandwidth.
The qemu migration speed default is 32MiB/s as defined in migration.c
/* Migration speed throttling */
static int64_t max_throttle = (32 << 20);
There's no need to throttle migration when targeting a file, so set migration
speed to unlimited prior to migration, and restore to libvirt default value
after migration.
Default units is MB for migrate_set_speed monitor command, so
(INT64_MAX / (1024 * 1024)) is used for unlimited migration speed.
Tested with both json and text monitors.
Now that migration speed is stored in qemuDomainObjPrivate structure,
save the new value when invoking qemuDomainMigrateSetMaxSpeed().
Allow setting migration speed on inactive domain too.
The maximum bandwidth that can be consumed when migrating a domain
is better classified as an operational vs configuration parameter of
the dommain. As such, store this parameter in qemuDomainObjPrivate
structure.
Commit c246b025 added new functions, but forgot to export them,
resulting in a build failure when using modules.
* src/libvirt_private.syms (network.h): Export new functions.
Commit 973fcd8f introduced the ability for qemu to reject snapshot
reversion on an ABI incompatibility; but the very example that was
first proposed on-list[1] as a demonstration of an ABI incompatibility,
namely that of changing the max memory allocation, was not being
checked for, resulting in a cryptic failure when running with larger
max mem than what the snapshot was created with:
error: operation failed: Error -22 while loading VM state
This commit merely protects the three variables within mem that are
referenced by qemu_command.c, rather than all 7 (the other 4 variables
affect cgroup handling, but as far as I can tell, have no visible effect
to the qemu guest). This also affects migration and save file handling,
which are other places where we perform ABI compatibility checks.
[1] https://www.redhat.com/archives/libvir-list/2010-December/msg00331.html
* src/conf/domain_conf.c (virDomainDefCheckABIStability): Add
memory sizing checks.
Commit 498d783 cleans up some of virtual file names for parsing strings
in memory. This patch cleans up (hopefuly) the rest forgotten by the
first patch.
This patch also changes all of the previously modified "filenames" to
valid URI's replacing spaces for underscores.
Changes to v1:
- Replace all spaces for underscores, so that the strings form valid
URI's
- Replace spaces in places changed by commit 498d783
Regression introduced in commit 3881a470, due to an improper rebase
of a cleanup written beforehand but only applied after a rebased of
a refactoring that created a new function in commit 25fb3ef.
Also avoids passing NULL to printf %s.
* src/qemu/qemu_driver.c: In qemuDomainSnapshotForEachQcow2()
it free up the memory of qemu_driver->qemuImgBinary in the
cleanup tag which leads to the garbage value of qemuImgBinary
in qemu_driver struct and libvirtd crash when running
"virsh snapshot-create" command a second time.
Signed-off-by: Eric Blake <eblake@redhat.com>
'+' in strings get translated to ' ' when editing domains.
While xenDaemonDomainCreateXML() did URL-escape the sexpr,
xenDaemonDomainDefineXML() did not.
Remove the explicit urlencode() in xenDaemonDomainCreateXML() and add
the direct encoding calls to xend_op_ext() because it calls xend_post()
which uses "Content-Type: application/x-www-form-urlencoded". According
to <http://www.w3.org/TR/html4/interact/forms.html#h-17.13.4.1> this
requires all parameters to be url-encoded as specified in rfc1738.
Notice: virBufferAsprintf(..., "%s=%s", ...) is again replaced by three
calls to virBufferURIEncodeString() and virBufferAddChar() because '='
is a "reserved" character, which would get escaped by
virBufferURIEncodeString(), which - by the way - escapes anything not
c_isalnum().
Signed-off-by: Philipp Hahn <hahn@univention.de>
While parsing XML strings from memory, the previous convention in
libvirt was to set the virtual file name to "domain.xml" or something
similar. This could potentialy trick the user into looking for a file
named domain.xml on the disk in an attempt to fix the error.
This patch changes these filenames to something that can't be as easily
confused for a valid filename.
Examples of error messages:
---------------------------
Error while loading file from disk:
15:07:59.015: 527: error : catchXMLError:709 : /path/to/domain.xml:1: StartTag: invalid element name
<domain type='kvm'><
--------------------^
Error while parsing definition in memory:
15:08:43.581: 525: error : catchXMLError:709 : (domain definition):2: error parsing attribute name
<name>vm1</name>
--^
Regression introduced in commit d6f6b2d194. Running
'virsh snapshot-create dom' would mistakenly report that
disks can only be specified for disk snapshots.
* src/conf/domain_conf.c (virDomainSnapshotDefParseString): Only
give error about no disk support when <disk> was found.
These functions access internals of the opaque object, and do
not need any rpc counterpart. It could be argued that we should
have provided these when snapshot objects were first introduced,
since all the other vir*Ptr objects have at least a GetName accessor.
* include/libvirt/libvirt.h.in (virDomainSnapshotGetName)
(virDomainSnapshotGetDomain, virDomainSnapshotGetConnect): Declare.
* src/libvirt.c (virDomainSnapshotGetName)
(virDomainSnapshotGetDomain, virDomainSnapshotGetConnect): New
functions.
* src/libvirt_public.syms: Export them.
Xen PV domU's have no PCI bus. node_device_udev.c calls pci_system_init
which looks for /sys/bus/pci. If it does not find /sys/bus/pci (which it
won't in a Xen PV domU) it returns unsuccesfully (ENOENT), which libvirt
considers fatal. This makes libvirt unusable in this environment, even
though there are plenty of valid virtualisation options that work
there (LXC, UML, and QEmu spring to mind)
https://bugzilla.redhat.com/show_bug.cgi?id=709471
Signed-off-by: Soren Hansen <soren@linux2go.dk>
* src/rpc/virnettlscontext.c: fix memory leak on
virNetTLSContextValidCertificate.
* Detected in valgrind run:
==25667==
==25667== 6,085 (44 direct, 6,041 indirect) bytes in 1 blocks are definitely
lost in loss record 326 of 351
==25667== at 0x4005447: calloc (vg_replace_malloc.c:467)
==25667== by 0x4F2791F3: _asn1_add_node_only (structure.c:53)
==25667== by 0x4F27997A: _asn1_copy_structure3 (structure.c:421)
==25667== by 0x4F276A50: _asn1_append_sequence_set (element.c:144)
==25667== by 0x4F2743FF: asn1_der_decoding (decoding.c:1194)
==25667== by 0x4F22B9CC: gnutls_x509_crt_import (x509.c:229)
==25667== by 0x805274B: virNetTLSContextCheckCertificate
(virnettlscontext.c:1009)
==25667== by 0x804DE32: testTLSSessionInit (virnettlscontexttest.c:693)
==25667== by 0x804F14D: virtTestRun (testutils.c:140)
==25667==
==25667== 23,188 (88 direct, 23,100 indirect) bytes in 11 blocks are definitely
lost in loss record 346 of 351
==25667== at 0x4005447: calloc (vg_replace_malloc.c:467)
==25667== by 0x4F22B841: gnutls_x509_crt_init (x509.c:50)
==25667== by 0x805272B: virNetTLSContextCheckCertificate
(virnettlscontext.c:1003)
==25667== by 0x804DDD1: testTLSSessionInit (virnettlscontexttest.c:673)
==25667== by 0x804F14D: virtTestRun (testutils.c:140)
* How to reproduce?
% cd libvirt && ./configure && make && make -C tests valgrind
or
% valgrind -v --leak-check=full ./tests/virnettlscontexttest
Signed-off-by: Alex Jia <ajia@redhat.com>
Variable 'l_disk' initialized to a null pointer value, control jumps to 'case
VIR_DOMAIN_DISK_DEVICE_DISK and then taking false branch, Within the expansion
of the macro 'libxlError': Field access results in a dereference of a null
pointer (loaded from variable 'l_disk').
* src/libxl/libxl_driver.c: Field access results in a dereference of a null
pointer (loaded from variable 'l_disk')
Signed-off-by: Alex Jia <ajia@redhat.com>
Regression introduced in commit 89b6284fd, due to an incorrect
conversion to the new means of converting disk names back to
the correct object.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Avoid NULL deref.
Although we were initializing worker threads during pool creating,
we missed this during virThreadPoolSendJob. This bug led to segmenation
fault as worker thread free() given argument.
This patch enables modifying network device configuration using the
virUpdateDeviceFlags API method. Matching of devices is accomplished
using MAC addresses.
While updating live configuration of a running domain, the user is
allowed only to change link state of the interface. Additional
modifications may be added later. For now the code checks for
unsupported changes and thereafter changes the link state, if
applicable.
When updating persistent configuration of guest's network interface the
whole configuration (except for the MAC address) may be modified and
is stored for the next startup.
* src/qemu/qemu_driver.c - Add dispatching of virUpdateDevice for
network devices update (live/config)
* src/qemu/qemu_hotplug.c - add setting of initial link state on live
device addition
- add function to change network device
configuration. By now it supports only
changing of link state
* src/qemu/qemu_hotplug.h - Headers to above functions
* src/qemu/qemu_process.c - set link states before virtual machine
start. Qemu does not support setting of
this on the command line.
This patch adds handlers for modification of guest's interface
link state. Both HMP and QMP commands are supported, but as the
link state functionality is from the beginning supported in QMP
the HMP code will probably never be used.
A new element is introduced to XML that allows to control
state of virtual network interfaces in hypervisors.
Live modification of the link state allows networking tools
propagate topology changes to guest OS or testing of
scenarios in complex (virtual) networks.
This patch adds elements to XML grammars and parsing and generating
code.
This patch adds functions to compare structures containing network
device configuration for equality. They serve for the purpose of
disallowing unsupported changes to live network devices.
This patch modifies error handling function for the XML parser provided
by libxml2.
Originaly only a line number and error message were logged. With this
new error handler function, the user is provided with a more complex
description of the parsing error.
Context of the error is printed in libXML2 style and filename of the
file, that caused the error is printed. Example of an parse error:
13:41:36.262: 16032: error : catchXMLError:706 :
/etc/libvirt/qemu/rh_bad.xml:58: Opening and ending tag mismatch: name
line 2 and domain
</domain>
---------^
Context of the error gives the user hints that may help to quickly
locate a corrupt xml file.
fixes BZs:
----------
Bug 708735 - [RFE] Show column and line on XML parsing error
https://bugzilla.redhat.com/show_bug.cgi?id=708735
Bug 726771 - libvirt does not specify problem file if persistent xml is
invalid
https://bugzilla.redhat.com/show_bug.cgi?id=726771
It is important to be able to attach USB redirected devices to a
particular controller (one that supports USB2 for instance).
Without this patch, only the default bus was used.
<redirdev bus='usb' type='spicevmc'>
<address type='usb' bus='0' port='4'/>
</redirdev>
The mainly changes are:
1) Update qemuMonitorGetBlockStatsInfo and it's children (Text/JSON)
functions to return the value of new latency fields.
2) Add new function qemuMonitorGetBlockStatsParamsNumber, which is
to count how many parameters the underlying QEMU supports.
3) Update virDomainBlockStats in src/qemu/qemu_driver.c to be
compatible with the changes by 1).
If libvirt daemon gets restarted and there is (at least) one
unresponsive qemu, the startup procedure hangs up. This patch creates
one thread per vm in which we try to reconnect to monitor. Therefore,
blocking in one thread will not affect other APIs.
This patch creates an optional BeginJob queue size limit. When
active, all other attempts above level will fail. To set this
feature assign desired value to max_queued variable in qemu.conf.
Setting it to 0 turns it off.
This patch annotates APIs with low or high priority.
In low set MUST be all APIs which might eventually access monitor
(and thus block indefinitely). Other APIs may be marked as high
priority. However, some must be (e.g. domainDestroy).
For high priority calls (HPC), there are some high priority workers
(HPW) created in the pool. HPW can execute only HPC, although normal
worker can process any call regardless priority. Therefore, only those
APIs which are guaranteed to end in reasonable small amount of time
can be marked as HPC.
The size of this HPC pool is static, because HPC are expected to end
quickly, therefore jobs assigned to this pool will be served quickly.
It can be configured in libvirtd.conf via prio_workers variable.
Default is set to 5.
To mark API with low or high priority, append priority:{low|high} to
it's comment in src/remote/remote_protocol.x. This is similar to
autogen|skipgen. If not marked, the generator assumes low as default.
With this, it is now possible to create external snapshots even
when SELinux is enforcing, and to protect the new file with a
lock manager.
* src/qemu/qemu_driver.c
(qemuDomainSnapshotCreateSingleDiskActive): Create and register
new file with proper permissions and locks.
(qemuDomainSnapshotCreateDiskActive): Update caller.
Lots of earlier patches led up to this point - the qemu snapshot_blkdev
monitor command can now be controlled by libvirt! Well, insofar as
SELinux doesn't prevent qemu from open(O_CREAT) on the files. There's
still some followup work before things work with SELinux enforcing,
but this patch is big enough to post now.
There's still room for other improvements, too (for example, taking a
disk snapshot of an inactive domain, by using qemu-img for both internal
and external snapshots; wiring up delete and revert control, including
additional flags from my RFC; supporting active QED disk snapshots;
supporting per-storage-volume snapshots such as LVM or btrfs snapshots;
etc.). But this patch is the one that proves the new XML works!
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Wire in
active disk snapshots.
(qemuDomainSnapshotDiskPrepare)
(qemuDomainSnapshotCreateDiskActive)
(qemuDomainSnapshotCreateSingleDiskActive): New functions.
No one uses this yet, but it will be important once
virDomainSnapshotCreateXML learns a VIR_DOMAIN_SNAPSHOT_DISK_ONLY
flag, and the xml allows passing in the new file names.
* src/qemu/qemu_monitor.h (qemuMonitorDiskSnapshot): New prototype.
* src/qemu/qemu_monitor_text.h (qemuMonitorTextDiskSnapshot):
Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDiskSnapshot):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorDiskSnapshot): New
function.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDiskSnapshot):
Likewise.
Snapshots alter the set of disk image files opened by qemu, so
they must be audited. But they don't involve a full disk definition
structure, just the new filename. Make the next patch easier by
refactoring the audit routines to just operate on file name.
* src/conf/domain_audit.h (virDomainAuditDisk): Update prototype.
* src/conf/domain_audit.c (virDomainAuditDisk): Act on strings,
not definition structures.
(virDomainAuditStart): Update caller.
* src/qemu/qemu_hotplug.c (qemuDomainChangeEjectableMedia)
(qemuDomainAttachPciDiskDevice, qemuDomainAttachSCSIDisk)
(qemuDomainAttachUsbMassstorageDevice)
(qemuDomainDetachPciDiskDevice, qemuDomainDetachDiskDevice):
Likewise.
My RFC for snapshot support [1] proposes several rules for when it is
safe to delete or revert to an external snapshot, predicated on
the existence of new API flags. These will be incrementally added
in future patches, but until then, blindly mishandling a disk
snapshot risks corrupting internal state, so it is better to
outright reject the attempts until the other pieces are in place,
thus incrementally relaxing the restrictions added in this patch.
[1] https://www.redhat.com/archives/libvir-list/2011-August/msg00361.html
* src/qemu/qemu_driver.c (qemuDomainSnapshotCountExternal): New
function.
(qemuDomainUndefineFlags, qemuDomainSnapshotDelete): Use it to add
safety valve.
(qemuDomainRevertToSnapshot, qemuDomainSnapshotCreateXML): Add safety
valve.
Prior to this patch, <domainsnapshot>/<disks> was ignored. This
changes it to be an error unless an explicit disk snapshot is
requested (a future patch may relax things if it turns out to
be useful to have a <disks> specification alongside a system
checkpoint).
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_CREATE_DISK_ONLY): New flag.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.
* src/esx/esx_driver.c (esxDomainSnapshotCreateXML): Disk
snapshots not supported yet.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Likewise.
I got confused when 'virsh domblkinfo dom disk' required the
path to a disk (which can be ambiguous, since a single file
can back multiple disks), rather than the unambiguous target
device name that I was using in disk snapshots. So, in true
developer fashion, I went for the best of both worlds - all
interfaces that operate on a disk (aka block) now accept
either the target name or the unambiguous path to the backing
file used by the disk.
* src/conf/domain_conf.h (virDomainDiskIndexByName): Add
parameter.
(virDomainDiskPathByName): New prototype.
* src/libvirt_private.syms (domain_conf.h): Export it.
* src/conf/domain_conf.c (virDomainDiskIndexByName): Also allow
searching by path, and decide whether ambiguity is okay.
(virDomainDiskPathByName): New function.
(virDomainDiskRemoveByName, virDomainSnapshotAlignDisks): Update
callers.
* src/qemu/qemu_driver.c (qemudDomainBlockPeek)
(qemuDomainAttachDeviceConfig, qemuDomainUpdateDeviceConfig)
(qemuDomainGetBlockInfo, qemuDiskPathToAlias): Likewise.
* src/qemu/qemu_process.c (qemuProcessFindDomainDiskByPath):
Likewise.
* src/libxl/libxl_driver.c (libxlDomainAttachDeviceDiskLive)
(libxlDomainDetachDeviceDiskLive, libxlDomainAttachDeviceConfig)
(libxlDomainUpdateDeviceConfig): Likewise.
* src/uml/uml_driver.c (umlDomainBlockPeek): Likewise.
* src/xen/xend_internal.c (xenDaemonDomainBlockPeek): Likewise.
* docs/formatsnapshot.html.in: Update documentation.
* tools/virsh.pod (domblkstat, domblkinfo): Likewise.
* docs/schemas/domaincommon.rng (diskTarget): Tighten pattern on
disk targets.
* docs/schemas/domainsnapshot.rng (disksnapshot): Update to match.
* tests/domainsnapshotxml2xmlin/disk_snapshot.xml: Update test.
Adds an optional element to <domainsnapshot>, which will be used
to give user control over external snapshot filenames on input,
and specify generated filenames on output.
For now, no driver accepts this element; that will come later.
<domainsnapshot>
...
<disks>
<disk name='vda' snapshot='no'/>
<disk name='vdb' snapshot='internal'/>
<disk name='vdc' snapshot='external'>
<driver type='qcow2'/>
<source file='/path/to/new'/>
</disk>
</disks>
<domain>
...
<devices>
<disk ...>
<driver name='qemu' type='raw'/>
<target dev='vdc'/>
<source file='/path/to/old'/>
</disk>
</devices>
</domain>
</domainsnapshot>
* src/conf/domain_conf.h (_virDomainSnapshotDiskDef): New type.
(_virDomainSnapshotDef): Add new elements.
(virDomainSnapshotAlignDisks): New prototype.
* src/conf/domain_conf.c (virDomainSnapshotDiskDefClear)
(virDomainSnapshotDiskDefParseXML, disksorter)
(virDomainSnapshotAlignDisks): New functions.
(virDomainSnapshotDefParseString): Parse new fields.
(virDomainSnapshotDefFree): Clean them up.
(virDomainSnapshotDefFormat): Output them.
* src/libvirt_private.syms (domain_conf.h): Export new function.
* docs/schemas/domainsnapshot.rng (domainsnapshot, disksnapshot):
Add more xml.
* docs/formatsnapshot.html.in: Document it.
* tests/domainsnapshotxml2xmlin/disk_snapshot.xml: New test.
* tests/domainsnapshotxml2xmlout/disk_snapshot.xml: Update.
In order to distinguish disk snapshots from system checkpoints, a
new state value that is only valid for snapshots is helpful.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_LAST): New placeholder.
* src/conf/domain_conf.h (virDomainSnapshotState): New enum mapping.
(VIR_DOMAIN_DISK_SNAPSHOT): New internal enum value.
* src/conf/domain_conf.c (virDomainState): Use placeholder.
(virDomainSnapshotState): Extend mapping by one for use in snapshot.
(virDomainSnapshotDefParseString, virDomainSnapshotDefFormat):
Handle new state.
(virDomainObjSetState, virDomainStateReasonToString)
(virDomainStateReasonFromString): Avoid compiler warnings.
* tools/virsh.c (vshDomainState, vshDomainStateReasonToString):
Likewise.
* src/libvirt_private.syms (domain_conf.h): Export new functions.
* docs/schemas/domainsnapshot.rng: Tighten state definition.
* docs/formatsnapshot.html.in: Document it.
* tests/domainsnapshotxml2xmlout/disk_snapshot.xml: New test.
Since a snapshot is fully recoverable, it is useful to have a
snapshot as a means of hibernating a guest, then reverting to
the snapshot to wake the guest up. This mode of usage is
similar to 'virsh save/virsh restore', except that virsh
save uses an external file while virsh snapshot keeps the
vm state internal to a qcow2 file. However, it only works on
persistent domains.
In the usage pattern of snapshot/revert for hibernating a guest,
there is no need to keep the guest running between the two points
in time, especially since that would generate runtime state that
would just be discarded. Add a flag to make it possible to
stop the domain after the snapshot has completed.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_CREATE_HALT):
New flag.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML)
(qemuDomainSnapshotCreateActive): Implement it.
Reverting to a state prior to an external snapshot risks
corrupting any other branches in the snapshot hierarchy that
were using the snapshot as a read-only backing file. So
disk snapshot code will default to preventing reverting to
a snapshot that has any children, meaning that deleting just
the children of a snapshot becomes a useful operation in
preparing that snapshot for being a future reversion target.
The code for the new flag is simple - it's one less deletion,
plus a tweak to keep the current snapshot correct.
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_DELETE_CHILDREN_ONLY): New flag.
* src/libvirt.c (virDomainSnapshotDelete): Document it, and
enforce mutual exclusion.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDelete): Implement
it.
The previous patch introduced new config, but if a hypervisor does
not support that new config, someone can write XML that does not
behave as documented. This prevents some of those cases by
explicitly rejecting transient disks for several hypervisors.
Disk snapshots will require a new flag to actually affect a snapshot
creation, so there's not much to reject there.
* src/qemu/qemu_command.c (qemuBuildDriveStr): Reject transient
disks for now.
* src/libxl/libxl_conf.c (libxlMakeDisk): Likewise.
* src/xenxs/xen_sxpr.c (xenFormatSxprDisk): Likewise.
* src/xenxs/xen_xm.c (xenFormatXMDisk): Likewise.
As discussed here:
https://www.redhat.com/archives/libvir-list/2011-August/msg00361.htmlhttps://www.redhat.com/archives/libvir-list/2011-August/msg00552.html
Adds snapshot attribute and transient sub-element:
<devices>
<disk type=... snapshot='no|internal|external'>
...
<transient/>
</disk>
</devices>
* docs/schemas/domaincommon.rng (snapshot): New define.
(disk): Add snapshot and persistent attributes.
* docs/formatdomain.html.in: Document them.
* src/conf/domain_conf.h (virDomainDiskSnapshot): New enum.
(_virDomainDiskDef): New fields.
* tests/qemuxml2argvdata/qemuxml2argv-disk-transient.xml: New
test of rng, no args counterpart until qemu support is complete.
* tests/qemuxml2argvdata/qemuxml2argv-disk-snapshot.args: New
file, snapshot attribute does not affect args.
* tests/qemuxml2argvdata/qemuxml2argv-disk-snapshot.xml: Likewise.
* tests/qemuxml2argvtest.c (mymain): Run new test.
Fix bug #611823 storage driver should prohibit pools with duplicate
underlying storage.
Add internal API virStoragePoolSourceFindDuplicate() to do uniqueness
check based on source location infomation for pool type.
* AUTHORS: add Lei Li
At least Xen-3.4.3 translates the /vm/localtime SXPR value to
/domain/platform/localtime and /domain/image/{linux,hvm}/localtime when
the domain is defined. When reading back that information libvirt only
handles HVM domains, but not PV domains: This results in libvirtd always
returning
<clock offset="utc"/>
while Xend used (localtime 1).
For PV domains use /domain/image/linux/localtime.
When reverting to a snapshot, the inactive domain configuration
has to be rolled back to what it was at the time of the snapshot.
Additionally, if the VM is active and the snapshot was active,
this now adds a failure if the two configurations are ABI
incompatible, rather than risking qemu confusion.
A future patch will add a VIR_DOMAIN_SNAPSHOT_FORCE flag, which
will be required for two risky code paths - reverting to an
older snapshot that lacked full domain information, and reverting
from running to a live snapshot that requires starting a new qemu
process. Any reverting that stops a running vm is also a form
of data loss (discarding the current running state to go back in
time), but as that is what reversion usually implies, it is
probably not worth requiring a force flag.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Copy out
domain.
(qemuDomainSnapshotCreateXML, qemuDomainRevertToSnapshot): Perform
ABI compatibility checks.
Commit 69278878 fixed one direction of arbitrarily-named snapshots,
but not the round trip path. While auditing domain_conf, I found
a couple other instances that weren't escaping arbitrary strings.
* src/conf/domain_conf.c (virDomainFSDefFormat)
(virDomainGraphicsListenDefFormat, virDomainSnapshotDefFormat):
Escape arbitrary strings.
Just like VM saved state images (virsh save), snapshots MUST
track the inactive domain xml to detect any ABI incompatibilities.
The indentation is not perfect, but functionality comes before form.
Later patches will actually supply a full domain; for now, this
wires up the storage to support one, but doesn't ever generate one
in dumpxml output.
Happily, libvirt.c was already rejecting use of VIR_DOMAIN_XML_SECURE
from read-only connections, even though before this patch, there was
no information to be secured by the use of that flag.
And while we're at it, mark the libvirt snapshot metadata files
as internal-use only.
* src/libvirt.c (virDomainSnapshotGetXMLDesc): Document flag.
* src/conf/domain_conf.h (_virDomainSnapshotDef): Add member.
(virDomainSnapshotDefParseString, virDomainSnapshotDefFormat):
Update signature.
* src/conf/domain_conf.c (virDomainSnapshotDefFree): Clean up.
(virDomainSnapshotDefParseString): Optionally parse domain.
(virDomainSnapshotDefFormat): Output full domain.
* src/esx/esx_driver.c (esxDomainSnapshotCreateXML)
(esxDomainSnapshotGetXMLDesc): Update callers.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML)
(vboxDomainSnapshotGetXMLDesc): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML)
(qemuDomainSnapshotLoad, qemuDomainSnapshotGetXMLDesc)
(qemuDomainSnapshotWriteMetadata): Likewise.
* docs/formatsnapshot.html.in: Rework doc example.
Based on a patch by Philipp Hahn.
Minor semantic change - allow domain xml to be generated in place
within a larger buffer, rather than having to go through a
temporary string.
* src/conf/domain_conf.c (virDomainDefFormatInternal): Add
parameter.
(virDomainDefFormat, virDomainObjFormat): Update callers.
Migration is another case of stranding metadata. And since
snapshot metadata is arbitrarily large, there's no way to
shoehorn it into the migration cookie of migration v3.
This patch consolidates two existing locations for migration
validation into one helper function, then enhances that function
to also do the new checks. If we could always trust the source
to validate migration, then the destination would not have to
do anything; but since older servers that did not do checking
can migrate to newer destinations, we have to repeat some of
the same checks on the destination; meanwhile, we want to
detect failures as soon as possible. With migration v2, this
means that validation will reject things at Prepare on the
destination if the XML exposes the problem, otherwise at Perform
on the source; with migration v3, this means that validation
will reject things at Begin on the source, or if the source
is old and the XML exposes the problem, then at Prepare on the
destination.
This patch is necessarily over-strict. Once a later patch
properly handles auto-cleanup of snapshot metadata on the
death of a transient domain, then the only time we actually
need snapshots to prevent migration is when using the
--undefinesource flag on a persistent source domain.
It is possible to recreate snapshot metadata on the destination
with VIR_DOMAIN_SNAPSHOT_CREATE_REDEFINE and
VIR_DOMAIN_SNAPSHOT_CREATE_CURRENT. But for now, that is limited,
since if we delete the snapshot metadata prior to migration,
then we won't know the name of the current snapshot to pass
along; and if we delete the snapshot metadata after migration
and use the v3 migration cookie to pass along the name of the
current snapshot, then we need a way to bypass the fact that
this patch refuses migration with snapshot metadata present.
So eventually, we may have to introduce migration protocol v4
that allows feature negotiation and an arbitrary number of
handshake exchanges, so as to pass as many rpc calls as needed
to transfer all the snapshot xml hierarchy.
But all of that is thoughts for the future; for now, the best
course of action is to quit early, rather than get into a
funky state of stale metadata; then relax restrictions later.
* src/qemu/qemu_migration.h (qemuMigrationIsAllowed): Make static.
* src/qemu/qemu_migration.c (qemuMigrationIsAllowed): Alter
signature, and allow checks for both outgoing and incoming.
(qemuMigrationBegin, qemuMigrationPrepareAny)
(qemuMigrationPerformJob): Update callers.
A nice benefit of deleting all snapshots at undefine time is that
you don't have to do any reparenting or subtree identification - since
everything goes, this is an O(n) process, whereas using multiple
virDomainSnapshotDelete calls would be O(n^2) or worse. But it is
only doable for snapshot metadata, where we are in control of the
data being deleted; for the actual snapshots, there's too much
likelihood of something going wrong, and requiring even more API
calls to figure out what failed in the meantime, so callers are
better off deleting the snapshot data themselves one snapshot at
a time where they can deal with failures as they happen.
* src/qemu/qemu_driver.c (qemuDomainUndefineFlags): Honor new flags.
As more clients start to want to know this information, doing
a PATH stat walk and malloc for every client adds up.
We are only caching the location, not the capabilities, so even
if qemu-img is updated in the meantime, it will still probably
live in the same location. So there is no need to worry about
clearing this particular cache.
* src/qemu/qemu_conf.h (qemud_driver): Add member.
* src/qemu/qemu_driver.c (qemudShutdown): Cleanup.
(qemuFindQemuImgBinary): Add an argument, and cache result.
(qemuDomainSnapshotForEachQcow2, qemuDomainSnapshotDiscard)
(qemuDomainSnapshotCreateInactive, qemuDomainSnapshotRevertInactive)
(qemuDomainSnapshotCreateXML, qemuDomainRevertToSnapshot): Update
callers.
Just as leaving managed save metadata behind can cause problems
when creating a new domain that happens to collide with the name
of the just-deleted domain, the same is true of leaving any
snapshot metadata behind. For safety sake, extend the semantic
change of commit b26a9fa9 to also cover snapshot metadata as a
reason to reject undefining an inactive domain. A future patch
will make sure that shutdown of a transient domain automatically
deletes snapshot metadata (whether by destroy, shutdown, or
guest-initiated action). Management apps of transient domains
should take care to capture xml of snapshots, if it is necessary
to recreate the snapshot metadata on a later transient domain
with the same name and uuid.
This also documents a new flag that hypervisors can choose to
support as a shortcut for taking care of the metadata as part of
the undefine process; however, nontrivial driver support for these
flags will be deferred to future patches.
Note that ESX and VBox can never be transient; therefore, they
do not have to worry about automatic cleanup after shutdown
(the persistent domain still remains); likewise they never
store snapshot metadata, so the undefine flag is trivial.
The nontrivial work remaining is thus in the qemu driver.
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_UNDEFINE_SNAPSHOTS_METADATA): New flag.
* src/libvirt.c (virDomainUndefine, virDomainUndefineFlags):
Document new limitations and flag.
* src/esx/esx_driver.c (esxDomainUndefineFlags): Trivial
implementation.
* src/vbox/vbox_tmpl.c (vboxDomainUndefineFlags): Likewise.
* src/qemu/qemu_driver.c (qemuDomainUndefineFlags): Enforce
the limitations.
Redefining a qemu snapshot requires a bit of a tweak to the common
snapshot parsing code, but the end result is quite nice.
Be careful that redefinitions do not introduce circular parent
chains. Also, we don't want to allow conversion between online
and offline existing snapshots. We could probably do some more
validation for snapshots that don't already exist to make sure
they are even feasible, by parsing qemu-img output, but that
can come later.
* src/conf/domain_conf.h (virDomainSnapshotParseFlags): New
internal flags.
* src/conf/domain_conf.c (virDomainSnapshotDefParseString): Alter
signature to take internal flags.
* src/esx/esx_driver.c (esxDomainSnapshotCreateXML): Update caller.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Support
new public flags.
Supporting NO_METADATA on snapshot creation is interesting - we must
still return a valid opaque snapshot object, but the user can't get
anything out of it (unless we add a virDomainSnapshotGetName()),
since it is no longer registered with the domain.
Also, virsh now tries to query for secure xml, in anticipation of
when we store <domain> xml inside <domainsnapshot>; for now, we
can trivially support it, since we have nothing secure.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Support
new flag.
(qemuDomainSnapshotGetXMLDesc): Trivially support VIR_DOMAIN_XML_SECURE.
The first two flags are essential for being able to replicate
snapshot hierarchies across multiple hosts, which will come in
handy for supervised migrations. It also allows a management app
to take a snapshot of a transient domain, save the metadata, stop
the domain, recreate a new transient domain by the same name,
redefine the snapshot, then revert to it.
This is not quite as convenient as leaving the metadata behind
after a domain is no longer around, but doing that has a few
problems: 1. the libvirt API can only delete snapshot metadata
if there is a valid domain handle to use to get to that snapshot
object - if stale data is left behind without a domain, there is
no way to request that the data be cleaned up. 2. creating a new
domain with the same name but different uuid than the older
domain where a snapshot existed cannot use the older snapshot
data; this risks confusing libvirt, and forbidding the stale
data is similar to the recent patch to forbid stale managed save.
The first two flags might be useful on hypervisors with no metadata,
but only for modifying the notion of the current snapshot;
however, I don't know how to do that for ESX or VBox.
The third flag is a convenience option, to combine a creation with
a delete metadata into one step. It is trivial for hypervisors
with no metadata.
The qemu changes will be involved enough to warrant a separate patch.
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_CREATE_REDEFINE)
(VIR_DOMAIN_SNAPSHOT_CREATE_CURRENT)
(VIR_DOMAIN_SNAPSHOT_CREATE_NO_METADATA): New flags.
* src/libvirt.c (virDomainSnapshotCreateXML): Document them, and
enforce mutual exclusion.
* src/esx/esx_driver.c (esxDomainSnapshotCreateXML): Trivial
implementation.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML): Likewise.
* docs/formatsnapshot.html.in: Document re-creation.
To make it easier to know when undefine will fail because of existing
snapshot metadata, we need to know how many snapshots have metadata.
Also, it is handy to filter the list of snapshots to just those that
have no parents; document that flag now, but implement it in later patches.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_LIST_ROOTS)
(VIR_DOMAIN_SNAPSHOT_LIST_METADATA): New flags.
* src/libvirt.c (virDomainSnapshotNum)
(virDomainSnapshotListNames): Document them.
* src/esx/esx_driver.c (esxDomainSnapshotNum)
(esxDomainSnapshotListNames): Implement trivial flag.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotNum)
(vboxDomainSnapshotListNames): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotNum)
(qemuDomainSnapshotListNames): Likewise.
Adding this was trivial compared to the previous patch for fixing
qemu snapshot deletion in the first place.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiscard): Add
parameter.
(qemuDomainSnapshotDiscardDescendant, qemuDomainSnapshotDelete):
Update callers.
A future patch will make it impossible to remove a domain if it
would leave behind any libvirt-tracked metadata about snapshots,
since stale metadata interferes with a new domain by the same name.
But requiring snaphot contents to be deleted before removing a
domain is harsh; with qemu, qemu-img can still make use of the
contents after the libvirt domain is gone. Therefore, we need
an option to get rid of libvirt tracking information, but not
the actual contents. For hypervisors that do not track any
metadata in libvirt, the implementation is trivial; all remaining
hypervisors (really, just qemu) will be dealt with separately.
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_DELETE_METADATA_ONLY): New flag.
* src/libvirt.c (virDomainSnapshotDelete): Document it.
* src/esx/esx_driver.c (esxDomainSnapshotDelete): Trivially
supported when there is no libvirt metadata.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotDelete): Likewise.
Similar to the last patch in isolating the filtering from the
client actions, so that clients don't have to reinvent the
filtering.
* src/conf/domain_conf.h (virDomainSnapshotForEachChild): New
prototype.
* src/libvirt_private.syms (domain_conf.h): Export it.
* src/conf/domain_conf.c (virDomainSnapshotActOnChild)
(virDomainSnapshotForEachChild): New functions.
(virDomainSnapshotCountChildren): Delete.
(virDomainSnapshotHasChildren): Simplify.
* src/qemu/qemu_driver.c (qemuDomainSnapshotReparentChildren)
(qemuDomainSnapshotDelete): Likewise.
Deleting a snapshot and all its descendants had problems with
tracking the current snapshot. The deletion does not necessarily
proceed in depth-first order, so a parent could be deleted
before a child, wreaking havoc on passing the notion of the
current snapshot to the parent. Furthermore, even if traversal
were depth-first, doing multiple file writes to pass current up
the chain one snapshot at a time is wasteful, comparing to a
single update to the current snapshot at the end of the algorithm.
* src/qemu/qemu_driver.c (snap_remove): Add field.
(qemuDomainSnapshotDiscard): Add parameter.
(qemuDomainSnapshotDiscardDescendant): Adjust accordingly.
(qemuDomainSnapshotDelete): Properly reset current.
This one's nasty. Ever since we fixed virHashForEach to prevent
nested hash iterations for safety reasons (commit fba550f6),
virDomainSnapshotDelete with VIR_DOMAIN_SNAPSHOT_DELETE_CHILDREN
has been broken for qemu: it deletes children, while leaving
grandchildren intact but pointing to a no-longer-present parent.
But even before then, the code would often appear to succeed to
clean up grandchildren, but risked memory corruption if you have
a large and deep hierarchy of snapshots.
For acting on just children, a single virHashForEach is sufficient.
But for acting on an entire subtree, it requires iteration; and
since we declared recursion as invalid, we have to switch to a
while loop. Doing this correctly requires quite a bit of overhaul,
so I added a new helper function to isolate the algorithm from the
actions, so that callers do not have to reinvent the iteration.
Note that this _still_ does not handle CHILDREN correctly if one
of the children is the current snapshot; that will be next.
* src/conf/domain_conf.h (_virDomainSnapshotDef): Add mark.
(virDomainSnapshotForEachDescendant): New prototype.
* src/libvirt_private.syms (domain_conf.h): Export it.
* src/conf/domain_conf.c (virDomainSnapshotMarkDescendant)
(virDomainSnapshotActOnDescendant)
(virDomainSnapshotForEachDescendant): New functions.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiscardChildren):
Replace...
(qemuDomainSnapshotDiscardDescenent): ...with callback that
doesn't nest hash traversal.
(qemuDomainSnapshotDelete): Use new function.
Each snapshot lookup was iterating over the entire hash table, O(n),
instead of honing in directly on the hash key, amortized O(1).
Besides, fixing this means that virDomainSnapshotFindByName can now
be used inside another virHashForeach iteration (without this patch,
attempts to lookup a snapshot by name during a hash iteration will
fail due to nested iteration).
* src/conf/domain_conf.c (virDomainSnapshotFindByName): Simplify.
(virDomainSnapshotObjListSearchName): Delete unused function.
For a system checkpoint of a running or paused domain, it's fairly
easy to honor new flags for altering which state to use after the
revert. For an inactive snapshot, the revert has to be done while
there is no qemu process, so do back-to-back transitions; this also
lets us revert to inactive snapshots even for transient domains.
* src/qemu/qemu_driver.c (qemuDomainRevertToSnapshot): Support new
flags.
Commit 5e47785 broke reverts to offline system checkpoint snapshots
with older qemu, since there is no longer any code path to use
qemu -loadvm on next boot. Meanwhile, reverts to offline system
checkpoints have been broken for newer qemu, both before and
after that commit, since -loadvm no longer works to revert to
disk state without accompanying vm state. Fix both of these by
using qemu-img to revert disk state.
Meanwhile, consolidate the (now 3) clients of a qemu-img iteration
over all disks of a VM into one function, so that any future
algorithmic fixes to the FIXMEs in that function after partial
loop iterations are dealt with at once. That does mean that this
patch doesn't handle partial reverts very well, but we're not
making the situation any worse in this patch.
* src/qemu/qemu_driver.c (qemuDomainRevertToSnapshot): Use
qemu-img rather than 'qemu -loadvm' to revert to offline snapshot.
(qemuDomainSnapshotRevertInactive): New helper.
(qemuDomainSnapshotCreateInactive): Factor guts...
(qemuDomainSnapshotForEachQcow2): ...into new helper.
(qemuDomainSnapshotDiscard): Use it.
If you take a checkpoint snapshot of a running domain, then pause
qemu, then restore the snapshot, the result should be a running
domain, but the code was leaving things paused. Furthermore, if
you take a checkpoint of a paused domain, then run, then restore,
there was a brief but non-deterministic window of time where the
domain was running rather than paused. Fix both of these
discrepancies by always pausing before restoring.
Also, check that the VM is active every time lock is dropped
between two monitor calls.
Finally, straighten out the events that get emitted on each
transition.
* src/qemu/qemu_driver.c (qemuDomainRevertToSnapshot): Always
pause before reversion, and improve events.
Implement the new running/paused overrides for saved state management.
Unfortunately, for virDomainSaveImageDefineXML, the saved state
updates are write-only - I don't know of any way to expose a way
to query the current run/pause setting of an existing save image
file to the user without adding a new API or modifying the domain
xml of virDomainSaveImageGetXMLDesc to include a new element to
reflect the state bit encoded into the save image. However, I
don't think this is a show-stopper, since the API is designed to
leave the state bit alone unless an explicit flag is used to
change it.
* src/qemu/qemu_driver.c (qemuDomainSaveInternal)
(qemuDomainSaveImageOpen): Adjust signature.
(qemuDomainSaveFlags, qemuDomainManagedSave)
(qemuDomainRestoreFlags, qemuDomainSaveImageGetXMLDesc)
(qemuDomainSaveImageDefineXML, qemuDomainObjRestore): Adjust
callers.
While it is nice that snapshots and saved images remember whether
the domain was running or paused, sometimes the restoration phase
wants to guarantee a particular state (paused to allow hot-plugging,
or running without needing to call resume). This introduces new
flags to allow the control, and a later patch will implement the
flags for qemu.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_SAVE_RUNNING)
(VIR_DOMAIN_SAVE_PAUSED, VIR_DOMAIN_SNAPSHOT_REVERT_RUNNING)
(VIR_DOMAIN_SNAPSHOT_REVERT_PAUSED): New flags.
* src/libvirt.c (virDomainSaveFlags, virDomainRestoreFlags)
(virDomainManagedSave, virDomainSaveImageDefineXML)
(virDomainRevertToSnapshot): Document their use, and enforce
mutual exclusion.
There are two classes of management apps that track events - one
that only cares about on/off (and only needs to track EVENT_STARTED
and EVENT_STOPPED), and one that cares about paused/running (also
tracks EVENT_SUSPENDED/EVENT_RESUMED). To keep both classes happy,
any transition that can go from inactive to paused must emit two
back-to-back events - one for started and one for suspended (since
later resuming of the domain will only send RESUMED, but the first
class isn't tracking that).
This also fixes a bug where virDomainCreateWithFlags with the
VIR_DOMAIN_START_PAUSED flag failed to start paused when restoring
from a managed save image.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_EVENT_SUSPENDED_RESTORED)
(VIR_DOMAIN_EVENT_SUSPENDED_FROM_SNAPSHOT)
(VIR_DOMAIN_EVENT_RESUMED_FROM_SNAPSHOT): New sub-events.
* src/qemu/qemu_driver.c (qemuDomainRevertToSnapshot): Use them.
(qemuDomainSaveImageStartVM): Likewise, and add parameter.
(qemudDomainCreate, qemuDomainObjStart): Send suspended event when
starting paused.
(qemuDomainObjRestore): Add parameter.
(qemuDomainObjStart, qemuDomainRestoreFlags): Update callers.
* examples/domain-events/events-c/event-test.c
(eventDetailToString): Map new detail strings.
QEMU uses USB bus name "usb.0" when using the legacy -usb argument.
If we want to allow USB devices to specify their addresses with legacy
-usb, we should either in case of legacy bus name drop the 0 from the
address bus, or just drop the 0 from device id. This patch does the
later.
Another solution would be to permit addressing on non-legacy USB
controllers only.
So that devices can be attached to hubs. Example, to attach to first
port of a usb-hub on port 1.
<hub type='usb'>
<address type='usb' bus='0' port='1'/>
</hub>
<input type='mouse' type='usb'>
<address type='usb' bus='0' port='1.1'/>
</hub>
also add a test entry
Commit 6766ff10 introduced a corner case bug with snapshot creation:
if a snapshot is created, but then we hit OOM while trying to
create the return value of the function, then we have polluted the
internal directory with the snapshot metadata with no way to clean
it up from the running libvirtd.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Don't
write metadata file on OOM condition.
Newer QEMU introduced cache=directsync for -drive, this patchset
is to expose it in libvirt layer.
* Introduced a new QEMU capability flag ($prefix_CACHE_DIRECTSYNC),
As even $prefix_CACHE_V2 is set, we can't known if directsync
is supported.
This patch adds the ability to make the filesystem for a filesystem
pool during a pool build.
The patch adds two new flags, no overwrite and overwrite, to control
when mkfs gets executed. By default, the patch preserves the
current behavior, i.e., if no flags are specified, pool build on a
filesystem pool only makes the directory on which the filesystem
will be mounted.
If the no overwrite flag is specified, the target device is checked
to determine if a filesystem of the type specified in the pool is
present. If a filesystem of that type is already present, mkfs is
not executed and the build call returns an error. Otherwise, mkfs
is executed and any data present on the device is overwritten.
If the overwrite flag is specified, mkfs is always executed, and any
existing data on the target device is overwritten unconditionally.
Several users have reported problems with 'virsh start' failing because
it was encountering a managed save situation where the managed save file
was incomplete. Be more robust to this by using two different magic
numbers, so that newer libvirt can gracefully handle an incomplete file
differently than a complete one, while older libvirt will at least fail
up front rather than trying to load only to have qemu fail at the end.
Managed save is a convenience - it exists to preserve as much state
as possible; if the state was not preserved, it is reasonable to just
log that fact, then proceed with a fresh boot. On the other hand,
user saves are under user control, so we must fail, but by making
the failure message distinct, the user can better decide how to handle
the situation of an incomplete save file.
* src/qemu/qemu_driver.c (QEMUD_SAVE_PARTIAL): New define.
(qemuDomainSaveInternal): Use it to mark incomplete images.
(qemuDomainSaveImageOpen, qemuDomainObjRestore): Add parameter
that controls what to do with partial images.
(qemuDomainRestoreFlags, qemuDomainSaveImageGetXMLDesc)
(qemuDomainSaveImageDefineXML, qemuDomainObjStart): Update callers.
Based on an initial idea by Osier Yang.
In a SELinux or root-squashing NFS environment, libvirt has to go
through some hoops to create a new file that qemu can then open()
by name. Snapshots are a case where we want to guarantee an empty
file that qemu can open; also, reopening a save file to convert it
from being marked partial to complete requires a reopen to avoid
O_DIRECT headaches. Refactor some existing code to make it easier
to reuse in later patches.
* src/qemu/qemu_migration.h (qemuMigrationToFile): Drop parameter.
* src/qemu/qemu_migration.c (qemuMigrationToFile): Let cgroup do
the stat, rather than asking caller to do it and pass info down.
* src/qemu/qemu_driver.c (qemuOpenFile): New function, pulled from...
(qemuDomainSaveInternal): ...here.
(doCoreDump, qemuDomainSaveImageOpen): Use it here as well.
After supporting multi function pci device, we only reserve function 1 on slot 1.
The user can use the other function on slot 1 in the xml config file. We should
detect this wrong usage.
Currently, the lxc implementation invokes 'ip' and 'ifconfig' commands
inside a container using 'virRun'. That has the side effect of requiring
those commands to be present and to function in a manner consistent with
the usage. Some small roots (such as ttylinux) may not have 'ip' or
'ifconfig'.
This patch replaces the use of these commands with usage of
netdevice. The result is that lxc containers do not have to implement
those commands, and lxc in libvirt is only dependent on the netdevice
interface.
I've tested this patch locally against the ubuntu libvirt version enough
to verify its generally sane. I attempted to build upstream today, but
failed with:
/usr/bin/ld:
../src/.libs/libvirt_driver_qemu.a(libvirt_driver_qemu_la-qemu_domain.o):
undefined reference to symbol 'xmlXPathRegisterNs@@LIBXML2_2.4.30
Thats probably a local issue only, but I wanted to get this patch up and
see what others thought of it. This is ubuntu bug
https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/828211 .
Hi,
I'm seeing an issue with udev and libvirt-lxc. Libvirt-lxc creates
/dev/ptmx as a symlink to /dev/pts/ptmx. When udev starts up, it
checks the device type, sees ptmx is 'not right', and replaces it
with a 'proper' ptmx.
In lxc, /dev/ptmx is bind-mounted from /dev/pts/ptmx instead of being
symlinked, so udev sees the right device type and leaves it alone.
A patch like the following seems to work for me. Would there be
any objections to this?
>From 4c5035de52de7e06a0de9c5d0bab8c87a806cba7 Mon Sep 17 00:00:00 2001
From: Ubuntu <ubuntu@domU-12-31-39-14-F0-B3.compute-1.internal>
Date: Wed, 31 Aug 2011 18:15:54 +0000
Subject: [PATCH 1/1] make ptmx a bind mount rather than symlink
udev on some systems checks the device type of /dev/ptmx, and replaces it if
not as expected. The symlink created by libvirt-lxc therefore gets replaced.
By creating it as a bind mount, the device type is correct and udev leaves it
alone.
Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
The libvirt BlockPull API supports the use of an initial bandwidth limit but the
qemu block_stream API does not. To get the desired behavior we use the two APIs
strung together: first BlockPull, then BlockJobSetSpeed. We can do this at the
driver level to avoid duplicated code in each monitor path.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Due to an unfortunate precedent in qemu, the units for the bandwidth parameter
to block_job_set_speed are different between the text monitor and the qmp
monitor. While the qmp monitor uses bytes/s, the text monitor expects MB/s.
Correct the units for the text interface.
Signed-off-by: Adam Litke <agl@us.ibm.com>
On systems with many pcpus, the sexpr returned by xend can be quite
large for dom0 when it is configured to have #vcpus = #pcpus (default).
E.g. on a 80 pcpu system, where dom0 had 80 vcpus, the sexpr details
for dom0 was 73817 bytes! Increase maximum buffer size to 256k.
xenDaemonDomainFetch() was overwriting errors reported by
xend_get() and xend_req(). E.g. without patch
error: failed Xen syscall xenDaemonDomainFetch failed to find this domain
with patch
error: internal error Xend returned HTTP Content-Length of 73817, which exceeds
maximum of 65536
Commit 2c85644b0b attempted to
fix a problem with tracking RPC messages from streams by doing
- if (msg->header.type == VIR_NET_REPLY) {
+ if (msg->header.type == VIR_NET_REPLY ||
+ (msg->header.type == VIR_NET_STREAM &&
+ msg->header.status != VIR_NET_CONTINUE)) {
client->nrequests--;
In other words any stream packet, with status NET_OK or NET_ERROR
would cause nrequests to be decremented. This is great if the
packet from from a synchronous virStreamFinish or virStreamAbort
API call, but wildly wrong if from a server initiated abort.
The latter resulted in 'nrequests' being decremented below zero.
This then causes all I/O for that client to be stopped.
Instead of trying to infer whether we need to decrement the
nrequests field, from the message type/status, introduce an
explicit 'bool tracked' field to mark whether the virNetMessagePtr
object is subject to tracking.
Also add a virNetMessageClear function to allow a message
contents to be cleared out, without adversely impacting the
'tracked' field as a naive memset() would do
* src/rpc/virnetmessage.c, src/rpc/virnetmessage.h: Add
a 'bool tracked' field and virNetMessageClear() API
* daemon/remote.c, daemon/stream.c, src/rpc/virnetclientprogram.c,
src/rpc/virnetclientstream.c, src/rpc/virnetserverclient.c,
src/rpc/virnetserverprogram.c: Switch over to use
virNetMessageClear() and pass in the 'bool tracked' value
when creating messages.
Parted does not report disk size in 512 byte units, but
rather the disks' logical sector size, which with modern
drives might be 4k.
* src/storage/parthelper.c: Remove hardcoded 512 byte sector
size
Introduced by 5e495c8b, except the ones for checking if numa
is supported by host, all the NO_SUPPORT are changed back. For
the ones about numa checking, change them into INTERNAL_ERROR.
If the libxl driver is compiled in, then everytime libvirtd
starts up on a non-Xen Dom0 host, it logs a error message.
Since this is an expected condition, we should not log at
'error' level, only 'info'.
* src/libxl/libxl_driver.c: Lower log level for certain
expected errors during driver init
It is possible (expected/likely in Fedora 15) for a cgroup controller
to be mounted in multiple locations at the same time, due to bind
mounts. Currently we leak memory if this happens, because we overwrite
the previous 'mountPoint' string. Instead just accept the first match
we find.
* src/util/cgroup.c: Only accept first match for a cgroup
controller mount
The virSecurityManagerSetProcessFDLabel method was introduced
after a mis-understanding from a conversation about SELinux
socket labelling. The virSecurityManagerSetSocketLabel method
should have been used for all such scenarios.
* src/security/security_apparmor.c, src/security/security_apparmor.c,
src/security/security_driver.h, src/security/security_manager.c,
src/security/security_manager.h, src/security/security_selinux.c,
src/security/security_stack.c: Remove SetProcessFDLabel driver
It is not possible to change the label of a TCP socket once it
has been opened. When creating a TCP socket care must be taken
to ensure the socket creation label is set & then cleared.
Remove the bogus call to virSecurityManagerSetProcessFDLabel
from the lock driver guest setup code and instead make use of
virSecurityManagerSetSocketLabel
The code for creating a sanlock lockspace accidentally used
SANLK_NAME_LEN instead of SANLK_PATH_LEN for a size check.
This meant disk paths were limited to 48 bytes !
* src/locking/lock_driver_sanlock.c: Fix disk path length
check
There is no reason to forbid pausing an autodestroy domain
(not to mention that 'virsh start --paused --autodestroy'
succeeds in creating a paused autodestroy domain).
Meanwhile, qemu was failing to enforce the API documentation that
autodestroy domains cannot be saved. And while the original
documentation only mentioned save/restore, snapshots are another
form of saving that are close enough in semantics as to make no
sense on one-shot domains.
* src/qemu/qemu_driver.c (qemudDomainSuspend): Drop bogus check.
(qemuDomainSaveInternal, qemuDomainSnapshotCreateXML): Forbid
saves of autodestroy domains.
* src/libvirt.c (virDomainCreateWithFlags, virDomainCreateXML):
Document snapshot interaction.
According to qemu-kvm/qerror.c all messages start with a capital
"Device ", but the current code only scans for the lower case "device ".
This results in "virDomainUpdateDeviceFlags()" to not detect locked
CD-ROMs and reporting success even in the case of a failure:
# virsh qemu-monitor-command "$VM" change\ drive-ide0-0-0\ \"/var/lib/libvirt/images/ucs_2.4-0-sec4-20110714145916-dvd-amd64.iso\"
Device 'drive-ide0-0-0' is locked
# virsh update-device "$VM" /dev/stdin <<<"<disk type='file' device='cdrom'><driver name='qemu' type='raw'/><source file='/var/lib/libvirt/images/ucs_2.4-0-sec4-20110714145916-dvd-amd64.iso'/><target dev='hda' bus='ide'/><readonly/><alias name='ide0-0-0'/><address type='drive' controller='0' bus='0' unit='0'/></disk>"
Device updated successfully
Signed-off-by: Philipp Hahn <hahn@univention.de>
There have been several instances of people having problems with
a broken managed save file, and not aware that they could use
'virsh managedsave-remove dom' to fix things. Making it possible
to do this as part of starting a domain makes the same functionality
easier to find, and one less API call.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_START_FORCE_BOOT): New
flag.
* src/libvirt.c (virDomainCreateWithFlags): Document it.
* src/qemu/qemu_driver.c (qemuDomainObjStart): Alter signature.
(qemuAutostartDomain, qemuDomainStartWithFlags): Update callers.
* tools/virsh.c (cmdStart): Expose it in virsh.
* tools/virsh.pod (start): Document it.
Back in 2008 when this line of util.h was written, gnulib's verify
module didn't allow the use of multiple verify() in one file
in combination with our choice of gcc -W options. But that has
since been fixed in gnulib, and newer gnulib even maps verify()
to the C1x feature of _Static_assert, which gives even nicer
diagnostics with a new enough compiler, so we might as well go
with the simpler verify().
* src/util/util.h (VIR_ENUM_IMPL): Use simpler verify, now that
gnulib module is smarter.
Commit 3261761 made it possible to use pipes instead of sockets
for outgoing tunneled migration; however, it caused a regression
because the pipe was never given a SELinux label.
* src/qemu/qemu_migration.c (doTunnelMigrate): Label outgoing pipe.
The bufferOffset has been initialized to zero in virNetMessageEncodePayloadRaw(),
so, we use bufferLength to represent the length of message which is going to be
sent to client side.
From: Matthias Bolte <matthias.bolte@googlemail.com>
Tested-by: Jim Fehlig <jfehlig@novell.com>
Matthias provided this patch to fix an issue I encountered in the
generator with APIs containing call-by-ref long type, e.g.
int virDomainMigrateGetMaxSpeed(virDomainPtr domain,
unsigned long *bandwidth,
unsigned int flags);
Domain listing, basic information retrieval and domain life cycle
management is implemented. But currently the domain XML output
lacks the complete devices section.
The driver uses OpenWSMAN to directly communicate with a Hyper-V
server over its WS-Management interface exposed via Microsoft WinRM.
The driver is based on the work of Michael Sievers. This started in
the same master program project group at the University of Paderborn
as the ESX driver.
See Michael's blog for details: http://hyperv4libvirt.wordpress.com/
Add a generator script to generate the structs and serialization
information for OpenWSMAN.
openwsman.h collects workarounds for problems in OpenWSMAN <= 2.2.6.
There are also disabled sections that would use ws_serializer_free_mem
but can't because it's broken in OpenWSMAN <= 2.2.6. Patches to fix
this have been posted upstream.
When a user migrates a domain by command as
libvirt saves vm's domain XML config in destination host after migration.
But it saves vm->def. Then, the saved XML contains some garbage.
<domain type='kvm' id='50'>
^^^^^^^^
...
<console type='pty' tty='/dev/pts/5'>
^^^^^^^^^^^^^^^^^
Avoid saving unnecessary things by saving persistent vm definition.
In case we add a new program in the future (we did that in the past and
we are going to do it again soon) current daemon will behave badly with
new client that wants to use the new program. Before the RPC rewrite we
used to just send an error reply to any request with unknown program.
With the RPC rewrite in 0.9.3 the daemon just closes the connection
through which such request was sent. This patch fixes this regression.
If users wants to connect to remote unix socket, e.g.
'qemu+unix://<remote>/system' currently the <remote> part is ignored,
ending up connecting to localhost. Connecting to remote socket is not
supported and user should have used TLS/TCP/SSH instead.
On success, the 'sendkey' command does not return any data, so
any data in the reply should be considered to be an error
message
* src/qemu/qemu_monitor_text.c: Treat non-"" reply data as an
error message for 'sendkey' command
The QEMU 'sendkey' command expects keys to be encoded in the same
way as the RFB extended keycode set. Specifically it wants extended
keys to have the high bit of the first byte set, while the Linux
XT KBD driver codeset uses the low bit of the second byte. To deal
with this we introduce a new keymap 'RFB' and use that in the QEMU
driver
* include/libvirt/libvirt.h.in: Add VIR_KEYCODE_SET_RFB
* src/qemu/qemu_driver.c: Use RFB keycode set instead of XT KBD
* src/util/virkeycode-mapgen.py: Auto-generate the RFB keycode
set from the XT KBD set
* src/util/virkeycode.c: Add RFB keycode entry to table. Add a
verify check on cardinality of the codeOffset table
This API labels all sockets created until ClearSocketLabel is called in
a way that a vm can access them (i.e., they are labeled with svirt_t
based label in SELinux).
The APIs are designed to label a socket in a way that the libvirt daemon
itself is able to access it (i.e., in SELinux the label is virtd_t based
as opposed to svirt_* we use for labeling resources that need to be
accessed by a vm). The new name reflects this.
When virStreamAbort is called on a stream that has not been used yet,
quite confusing error is returned: "this function is not supported by
the connection driver". Let's just ignore such streams as there's
nothing to abort anyway.
If migration failed on source daemon, the migration is automatically
canceled by the daemon itself. Thus we don't need to call
virDomainMigrateConfirm3(cancelled=1). Calling it doesn't cause any harm
but the resulting error message printed in logs may confuse people.
Audit all changes to the qemu vm->current_snapshot, and make them
update the saved xml file for both the previous and the new
snapshot, so that there is always at most one snapshot with
<active>1</active> in the xml, and that snapshot is used as the
current snapshot even across libvirtd restarts.
This patch does not fix the case of virDomainSnapshotDelete(,CHILDREN)
where one of the children is the current snapshot; that will be later.
* src/conf/domain_conf.h (_virDomainSnapshotDef): Alter member
type and name.
* src/conf/domain_conf.c (virDomainSnapshotDefParseString)
(virDomainSnapshotDefFormat): Update clients.
* docs/schemas/domainsnapshot.rng: Tighten rng.
* src/qemu/qemu_driver.c (qemuDomainSnapshotLoad): Reload current
snapshot.
(qemuDomainSnapshotCreateXML, qemuDomainRevertToSnapshot)
(qemuDomainSnapshotDiscard): Track current snapshot.
Changing the current vm, and writing that change to the file
system, all before a new qemu starts, is risky; it's hard to
roll back if starting the new qemu fails for some reason.
Instead of abusing vm->current_snapshot and making the command
line generator decide whether the current snapshot warrants
using -loadvm, it is better to just directly pass a snapshot all
the way through the call chain if it is to be loaded.
This frees up the last use of snapshot->def->active for qemu's
use, so the next patch can repurpose that field for tracking
which snapshot is current.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Don't use active
field of snapshot.
* src/qemu/qemu_process.c (qemuProcessStart): Add a parameter.
* src/qemu/qemu_process.h (qemuProcessStart): Update prototype.
* src/qemu/qemu_migration.c (qemuMigrationPrepareAny): Update
callers.
* src/qemu/qemu_driver.c (qemudDomainCreate)
(qemuDomainSaveImageStartVM, qemuDomainObjStart)
(qemuDomainRevertToSnapshot): Likewise.
(qemuDomainSnapshotSetCurrentActive)
(qemuDomainSnapshotSetCurrentInactive): Delete unused functions.
https://bugzilla.redhat.com/show_bug.cgi?id=727709
mentions that if qemu fails to create the snapshot (such as what
happens on Fedora 15 qemu, which has qmp but where savevm is only
in hmp, and where libvirt is old enough to not try the hmp fallback),
then 'virsh snapshot-list dom' will show a garbage snapshot entry,
and the libvirt internal directory for storing snapshot metadata
will have a bogus file.
This fixes the fallout bug of polluting the snapshot-list with
garbage on failure (the root cause of the F15 bug of not having
fallback to hmp has already been fixed in newer libvirt releases).
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Allocate
memory before making snapshot, and cleanup on failure. Don't
dereference NULL if transient domain exited during snapshot creation.
* src/qemu/qemu_migration.c: avoid dead 'ret' assignment and silence
clang warning.
Detected by ccc-analyzer:
libvirt.c:4277:5: warning: Value stored to 'ret' is never read
ret = domain->conn->driver->domainMigrateConfirm3
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* src/qemu/qemu_migration.c: avoid dead 'ret' assignment and silence
clang warning.
Detected by ccc-analyzer:
CC libvirt_driver_qemu_la-qemu_migration.lo
qemu/qemu_migration.c:2046:5: warning: Value stored to 'ret' is never read
ret = qemuMigrationConfirm(driver, sconn, vm,
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
virFileOpenAs takes desired uid:gid as arguments, and not only uses
them for a fork/setuid/setgid when retrying failed open operations,
but additionally always forces the opened file to be owned by the
given uid:gid.
One example of the problems this causes is that, when restoring a
domain from a file that is owned by the qemu user, opening the file
chowns it to root. if dynamic_ownership=1 this is coincidentally
expected, but if dynamic_ownership=0, no existing file should ever
have its ownership changed.
This patch adds an extra check before calling fchown() - it only does
it if O_CREAT was passed to virFileOpenAs() in the openflags.
pciDeviceListSteal(pcidevs, dev) removes dev from pcidevs reducing
the length of pcidevs, so moving onto what was the next dev is wrong.
Instead callers should pop entry 0 repeatedly until pcidevs is empty.
Signed-off-by: Steve Hodgson <shodgson@solarflare.com>
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
I was testing a virsh patch, and wanted to see if I had passed the
flags I thought. But with LIBVIRT_DEBUG in the environment, I just
saw:
14:24:52.359: 15022: debug : virDomainSnapshotNum:15586 : dom=0xc9c180, (VM: name=rhel_6-64, uuid=48f8e8e7-e14f-0e14-02f0-ce71997bdcab),
including a trailing space. This fixes the issues.
* src/libvirt.c: Log flag parameters, even if currently unused.
(VIR_DOMAIN_DEBUG_0): Drop trailing comma in log.
(VIR_DOMAIN_DEBUG_1): Split guts into...
(VIR_DOMAIN_DEBUG_2): ...new macro.
* src/qemu/qemu_monitor_json.c: Handle error "CommandNotFound" and
report the error.
* src/qemu/qemu_monitor_text.c: If a sub info command is not found,
it prints the output of "help info", for other commands,
"unknown command" is printed.
Without this patch, libvirt always report:
An error occurred, but the cause is unknown
This patch was adapted from a patch by Osier Yang <jyang@redhat.com> to
break out detection of unrecognized text monitor commands into a separate
function.
Signed-off-by: Adam Litke <agl@us.ibm.com>
s/VIR_ERR_NO_SUPPORT/VIR_ERR_OPERATION_INVALID/
Special case is changes on lxcDomainInterfaceStats, if it's not
implemented on the platform, prints error like:
lxcError(VIR_ERR_OPERATION_INVALID, "%s",
_("interface stats not implemented on this platform"));
As the function is supported by driver actually, error like
VIR_ERR_NO_SUPPORT is confused.
Now, bad key-code in send-key can cause segmentation fault in libvirt.
(example)
% virsh send-key --codeset win32 12
error: End of file while reading data: Input/output error
This is caused by overrun at scanning keycode array.
Fix it.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Often, we want to use XPath functions on the just-parsed document;
fold this into the parser function for convenience.
* src/util/xml.h (virXMLParseHelper): Add argument.
(virXMLParseStrHelper, virXMLParseFileHelper): Delete.
(virXMLParseCtxt, virXMLParseStringCtxt, virXMLParseFileCtxt): New
macros.
* src/libvirt_private.syms (xml.h): Remove deleted functions.
* src/util/xml.c (virXMLParseHelper): Add argument.
(virXMLParseStrHelper, virXMLParseFileHelper): Delete.
ACK was given too soon. According to the code, the xm driver is
only used for inactive domains, and has no notion of an active
domain, thus, it cannot support undefine of a running domain.
The real fix for xen needs to be in the unified driver and/or
the xend level.
This reverts commit 49186deda6.
* src/qemu/qemu_monitor_text.c: BALLOON_PREFIX was defined as
"balloon: actual=", which cause "actual=" is stripped early before
the real parsing. This patch changes BALLOON_PREFIX into "balloon: ",
and modifies related functions, also renames
"qemuMonitorParseExtraBalloonInfo" to "qemuMonitorParseBalloonInfo",
as after the changing, it parses all the info returned by "info balloon".
Although we are flushing cache after some critical writes (e.g.
volume creation), after some others we do not (e.g. volume cloning).
This patch fix this issue. That is for volume cloning, writing
header of logical volume, and storage wipe.
When spice_tls is set but listen_tls is not, we don't initialize
GnuTLS library. So any later gnutls call (e.g. during migration,
where we initialize a certificate) will access uninitialized GnuTLS
internal structs and throws an error.
Although, we might now initialize GnuTLS twice, it is safe according
to the documentation:
This function can be called many times,
but will only do something the first time.
This patch creates 2 functions: virNetTLSInit and virNetTLSDeinit
with respect to written above.
Regression introduced in commit b7e5ca4.
Mingw lacks kill(), but we were only using it for a sanity check;
so we can go with one less check.
Also, on OOM error, this function should outright fail rather than
claim that the pid file was successfully read.
* src/util/virpidfile.c (virPidFileReadPathIfAlive): Skip kill
call where unsupported, and report error on OOM.
If a client had initiated a stream abort, it will have a call
waiting for a reply in the queue. If more data continues to
arrive on the stream, the abort command could mistakenly get
signalled as complete. Remove the code from async data processing
that looked for waiting calls. Add a sanity check to ensure no
async call can ever be marked as needing a reply
* src/rpc/virnetclient.c: Ensure async data packets can't
trigger a reply
A virsh command like:
migrate --live --copy-storage-all Guest qemu+ssh://user@host/system
--persistent --verbose
shows
Migration: [ 0 %]
during the storage copy and does not start counting
until the ram transfer starts
Fix this by scraping optional disk transfer status, and adding it
into the progress meter.
Otherwise the device will still be bound to pci-stub driver even
it's set as "managed=yes" when do detaching. Of course, it won't
triger any driver reprobing too.
If a stream gets a server initiated abort, the client may still
send an abort request before it receives the server side abort.
This causes the server to send back another abort for the
stream. Since the protocol defines that abort is the last thing
to be sent, the client gets confused by this second abort from
the server. If the stream is already shutdown, just drop any
client requested abort, rather than sending back another message.
This fixes the regression from previous versions.
Tested as follows
In one virsh session
virsh # start foo
virsh # console foo
In other virsh session
virsh # destroy foo
The first virsh session should be able to continue issuing
commands without error. Prior to this patch it saw
virsh # list
error: Failed to list active domains
error: An error occurred, but the cause is unknown
virsh # list
error: Failed to list active domains
error: no call waiting for reply with prog 536903814 vers 1 serial 9
* src/rpc/virnetserverprogram.c: Drop abort requests
for streams which no longer exist
Every active stream results in a reference being held on the
virNetServerClientPtr object. This meant that if a client quit
with any streams active, although all I/O was stopped the
virNetServerClientPtr object would leak. This causes libvirtd
to leak any file handles associated with open streams when a
client quit
To fix this, when we call virNetServerClientClose there is a
callback invoked which lets the daemon release the streams
and thus the extra references
* daemon/remote.c: Add a hook to close all streams
* daemon/stream.c, daemon/stream.h: Add API for releasing
all streams
* src/rpc/virnetserverclient.c, src/rpc/virnetserverclient.h:
Allow registration of a hook to trigger when closing client
Get rid of the #if __linux__ check in virPidFileReadPathIfAlive that
was preventing a check of a symbolic link in /proc/<pid>/exe on
non-linux platforms against an expected executable. Replace
this with a run-time check testing whether the /proc/<pid>/exe is a
symbolic link and if so call the function doing the comparison
against the expected file the link is supposed to point to.
This patch renames getPhysfn to getPhysfnDev and adds code to get the
Physical function and Virtual Function index of the direct attach linkdev (if
the direct attach interface is a SRIOV VF). The idea is to send the port
profile message to a PF if the direct attach interface is a SRIOV VF.
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: David Wang <dwang2@cisco.com>
This patch adds the following functions to get PF/VF relationship of an SRIOV
network interface:
ifaceIsVirtualFunction: Function to check if a network interface is a SRIOV VF
ifaceGetVirtualFunctionIndex: Function to get VF index if a network interface is a SRIOV VF
ifaceGetPhysicalFunction: Function to get the PF net interface name of a SRIOV VF net interface
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: David Wang <dwang2@cisco.com>
This patch adds the following helper functions:
pciDeviceIsVirtualFunction: Function to check if a pci device is a sriov VF
pciGetVirtualFunctionIndex: Function to get the VF index of a sriov VF
pciDeviceNetName: Function to get the network device name of a pci device
pciConfigAddressCompare: Function to compare pci config addresses
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: David Wang <dwang2@cisco.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
This patch moves some of the sriov related pci code from node_device driver
to src/util/pci.[ch]. Some functions had to go thru name and argument list
change to accommodate the move.
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: David Wang <dwang2@cisco.com>
In some versions of qemu, both virtio-blk-pci and virtio-net-pci
devices can have an event_idx setting that determines some details of
event processing. When it is enabled, it "reduces the number of
interrupts and exits for the guest". qemu will automatically enable
this feature when it is available, but there may be cases where this
new feature could actually make performance worse (NB: no such case
has been found so far).
As a safety switch in case such a situation is encountered in the
field, this patch adds a new attribute "event_idx" to the <driver>
element of both disk and interface devices. event_idx can be set to
"on" (to force event_idx on in case qemu has it disabled by default)
or "off" (for force event_idx off). In the case that event_idx support
isn't present in qemu, the attribute is ignored (this on the advice of
the qemu developer).
docs/formatdomain.html.in: document the new flag (marking it as
"don't mess with this!"
docs/schemas/domain.rng: add event_idx in appropriate places
src/conf/domain_conf.[ch]: add event_idx to parser and formatter
src/libvirt_private.syms: export
virDomainVirtioEventIdx(From|To)String
src/qemu/qemu_capabilities.[ch]: detect and report event_idx in
disk/net
src/qemu/qemu_command.c: add event_idx parameter to qemu commandline
when appropriate.
tests/qemuxml2argvdata/qemuxml2argv-event_idx.args,
tests/qemuxml2argvdata/qemuxml2argv-event_idx.xml,
tests/qemuxml2argvtest.c,
tests/qemuxml2xmltest.c: test cases for event_idx.
By opening a connection to remote qemu process ourselves and passing the
socket to qemu we get much better errors than just "migration failed"
when the connection is opened by qemu.
The core of these two functions is very similar and most of it is even
exactly the same. Factor out the core functionality into a separate
function to remove code duplication and make further changes easier.
With gcc 4.5.1:
util/virpidfile.c: In function 'virPidFileAcquirePath':
util/virpidfile.c:308:66: error: nested extern declaration of '_gl_verify_function2' [-Wnested-externs]
Then in tests/commandtest.c, the new virPidFile APIs need to be used.
* src/util/virpidfile.c (virPidFileAcquirePath): Move verify to
top level.
* tests/commandtest.c: Use new pid APIs.
In daemons using pidfiles to protect against concurrent
execution there is a possibility that a crash may leave a stale
pidfile on disk, which then prevents later restart of the daemon.
To avoid this problem, introduce a pair of APIs which make
use of virFileLock to ensure crash-safe & race condition-safe
pidfile acquisition & releae
* src/libvirt_private.syms, src/util/virpidfile.c,
src/util/virpidfile.h: Add virPidFileAcquire and virPidFileRelease
In some cases the caller of virPidFileRead might like extra checks
to determine whether the pid just read is really the one they are
expecting. This adds virPidFileReadIfAlive which will check whether
the pid is still alive with kill(0, -1), and (on linux only) will
look at /proc/$PID/path
* libvirt_private.syms, util/virpidfile.c, util/virpidfile.h: Add
virPidFileReadIfValid and virPidFileReadPathIfValid
* network/bridge_driver.c: Use new APIs to check PID validity
The functions for manipulating pidfiles are in util/util.{c,h}.
We will shortly be adding some further pidfile related functions.
To avoid further growing util.c, this moves the pidfile related
functions into a dedicated virpidfile.{c,h}. The functions are
also all renamed to have 'virPidFile' as their name prefix
* util/util.h, util/util.c: Remove all pidfile code
* util/virpidfile.c, util/virpidfile.h: Add new APIs for pidfile
handling.
* lxc/lxc_controller.c, lxc/lxc_driver.c, network/bridge_driver.c,
qemu/qemu_process.c: Add virpidfile.h include and adapt for API
renames
Add some simple wrappers around the fcntl() discretionary file
locking capability.
* src/util/util.c, src/util/util.h, src/libvirt_private.syms: Add
virFileLock and virFileUnlock APIs
We forgot to add virDomainUndefineFlags for a couple of hypervisors.
This wires up trivial versions (since neither hypervisor supports
managed save yet, they do not need to support any flags).
* src/vbox/vbox_tmpl.c (vboxDomainCreateXML): Update caller.
(vboxDomainUndefine): Move guts...
(vboxDomainUndefineFlags): ...to new function.
* src/xenapi/xenapi_driver.c (xenapiDomainUndefine)
(xenapiDomainUndefineFlags): Likewise.
Our logic throws off analyzer tools:
ptr var = NULL;
if (flags == 0) flags = live ? _LIVE : _CONFIG;
if (flags & _LIVE) do stuff
if (flags & _CONFIG) var = non-null;
if (flags & _LIVE) do more stuff
else if (flags & _CONFIG) use var
the tools keep thinking that var can still be NULL in the last
if clause, adding the hint shuts them up.
* src/qemu/qemu_driver.c (qemuDomainSetBlkioParameters): Add a
static analysis hint.
While the first encountered dns host record is being parsed, it's
possible for virNetworkDef::hosts to point to memory that has been
allocated, but virNetworkDef::nhosts to still be 0. If there is a
failure during that time, virNetworkDef::hosts will be leaked.
Although this isn't currently the case for virNetworkDef::txtrecords,
it could become that way through future re-factoring, and it hurts
nothing to restructure the freeing of txtrecord data to match that of
hosts data.
The following XML:
<serial type='udp'>
<source mode='connect' service='9999'/>
</serial>
is accepted by domain_conf.c but maps to the qemu command line:
-chardev udp,host=127.0.0.1,port=2222,localaddr=(null),localport=(null)
qemu can cope with everything omitting except the connection port, which
seems to also be the intent of domain_conf validation, so let's not
generate bogus command lines for that case.
The defaults are empty strings for addresses and 0 for the localport
Additionally, tweak the qemu cli parsing to handle omitted host
parameters
for -serial udp
Transient domains reject attempts to set autostart, and using
virDomainCreate to restart a domain only works on persistent
domains. Therefore, managed save makes no sense on transient
domains, and should be rejected up front rather than creating
an otherwise unrecoverable managed save file.
Besides, transient domains imply that a lot more management is
being done by the upper layer; this includes the assumption
that the upper layer is okay managing the saved state file
created by virDomainSave, and does not need to use managed save.
* src/libvirt.c: Document that transient domains are incompatible
with managed save.
* src/qemu/qemu_driver.c (qemuDomainManagedSave): Enforce it.
* src/libxl/libxl_driver.c (libxlDomainManagedSave): Likewise.
I noticed some inconsistent use of 'else'.
* src/qemu/qemu_driver.c (qemuCPUCompare)
(qemuDomainSnapshotCreateXML, qemuDomainRevertToSnapshot)
(qemuDomainSnapshotDiscard): Match coding conventions.
If a snapshot with the name already exists, virDomainSnapshotAssignDef()
just returns NULL, in which case the snapshot definition is leaked.
Currently this leak is not a big problem, since qemuDomainSnapshotLoad()
is only called once during initial startup of libvirtd.
Signed-off-by: Philipp Hahn <hahn@univention.de>
A previous commit gave the LXC driver the ability to mount
block devices for the container filesystem. Through use of
the loopback device functionality, we can build on this to
support use of plain file images for LXC filesytems.
By setting the LO_FLAGS_AUTOCLEAR flag we can ensure that
the loop device automatically disappears when the container
dies / shuts down
* src/lxc/lxc_container.c: Raise error if we see a file
based filesystem, since it should have been turned into
a loopback device already
* src/lxc/lxc_controller.c: Rewrite any filesystems of
type=file, into type=block, by binding the file image
to a free loop device
Currently the LXC driver can only populate filesystems from
host filesystems, using bind mounts. This patch allows host
block devices to be mounted. It autodetects the filesystem
format at mount time, and adds the block device to the cgroups
ACL. Example usage is
<filesystem type='block' accessmode='passthrough'>
<source dev='/dev/sda1'/>
<target dir='/home'/>
</filesystem>
* src/lxc/lxc_container.c: Mount block device filesystems
* src/lxc/lxc_controller.c: Add block device filesystems
to cgroups ACL
An application container shouldn't get a private /dev. Fix
the regression from 6d37888e6a
* src/lxc/lxc_container.c: Don't mount /dev for app containers
Detected by ccc-analyzer, reported by Alex Jia.
qemuProcessStart always calls qemuProcessWaitForMonitor with a
non-negative position, but qemuProcessAttach always calls with -1.
In the latter case, there is no log file we can scrape, so we
also should not be trying to scrape the logs if the qemu process
died at the very end.
* src/qemu/qemu_process.c (qemuProcessWaitForMonitor): Don't try
to read from log in qemuProcessAttach case.
This addresses https://bugzilla.redhat.com/show_bug.cgi?id=713728
When "defining" a new network (or one that exists but isn't currently
active) the new definition is stored in network->def, but for a
network that already exists and is active, the new definition is
stored in network->newDef, and then moved over to network->def as soon
as the network is destroyed.
However, the code that writes the dhcp and dns hosts files used by
dnsmasq was always using network->def for its information, even when
the new data was actually in network->newDef, so the hosts files
always lagged one edit behind the definition.
This patch changes the code to keep the pointer to the new definition
after it's been assigned into the network, and use it directly
(regardless of whether it's stored in network->newDef or network->def)
to construct the hosts files.
Value stored to 'ret' is never read, so remove this dead assignment.
* src/qemu/qemu_monitor_text.c: kill dead assignment.
Signed-off-by: Alex Jia <ajia@redhat.com>
Value stored to 'ret' is never read, in fact, 'cleanup' section will
directly return -1 when function is fail, so remove this dead assignment.
* src/qemu/qemu_process.c: kill dead assignment.
Signed-off-by: Alex Jia <ajia@redhat.com>
When trying to use any SASL authentication for TCP sockets by
setting auth_tls = "sasl" in libvirtd.conf on server side, the
client will hang because of the sasl session relocking other than
dropping the lock when exiting virNetSASLSessionExtKeySize()
* src/rpc/virnetsaslcontext.c: virNetSASLSessionExtKeySize drop the
lock on exit
This patch introduces a internal RPC API "virNetServerClose", which
is standalone with "virNetServerFree". it closes all the socket fds,
and unlinks the unix socket paths, regardless of whether the socket
is still referenced or not.
This is to address regression bug:
https://bugzilla.redhat.com/show_bug.cgi?id=725702
Detection based on gnutls_session doesn't work because GnuTLS 2.x.y
comes with a compat.h that defines gnutls_session to gnutls_session_t.
Instead detect this based on LIBGNUTLS_VERSION_MAJOR. Move this from
configure/config.h to gnutls_1_0_compat.h and make sure that all users
include gnutls_1_0_compat.h properly.
Also fix header guard in gnutls_1_0_compat.h.
Leak detected by Coverity; only possible on unlikely ptsname_r
failure. Additionally, the man page for ptsname_r states that
failure is merely non-zero, not necessarily -1.
* src/util/util.c (virFileOpenTtyAt): Avoid leak on ptsname_r
failure.
Coverity detected that ifaceGetNthParent had already dereferenced
'nth' prior to the conditional; all callers already complied with
passing a non-NULL pointer so make this part of the contract.
* src/util/interface.h (ifaceGetNthParent): Add annotations.
* src/util/interface.c (ifaceGetNthParent): Drop useless null check.
In virNetServerNew, Coverity didn't realize that srv->mdsnGroupName
can only be non-NULL if mdsnGroupName was non-NULL.
In virNetServerRun, Coverity didn't realize that the array is non-NULL
if the array count is non-zero.
* src/rpc/virnetserver.c (virNetServerNew): Use alternate pointer.
(virNetServerRun): Give coverity a hint.
Coverity complained that 395 out of 409 virAsprintf calls are
checked, and therefore assumed that the remaining cases are bugs
waiting to happen. But in each of these cases, a failed virAsprintf
will properly set the target string to NULL, and pass on that
failure to the caller, without wasting efforts to check the call.
Adding the ignore_value silences Coverity.
* src/conf/domain_audit.c (virDomainAuditGetRdev): Ignore
virAsprintf return value, when it behaves like we need.
* src/network/bridge_driver.c (networkDnsmasqLeaseFileNameDefault)
(networkRadvdConfigFileName, networkBridgeDummyNicName)
(networkRadvdPidfileBasename): Likewise.
* src/util/storage_file.c (absolutePathFromBaseFile): Likewise.
* src/openvz/openvz_driver.c (openvzGenerateContainerVethName):
Likewise.
* src/util/command.c (virCommandTranslateStatus): Likewise.
Quite a few leaks detected by coverity. For chr, the leaks were
close enough to the allocations to plug in place; for disk, the
leaks were separated from the allocation by enough other lines with
intermediate failure cases that I refactored the cleanup instead.
* src/qemu/qemu_command.c (qemuParseCommandLine): Plug leaks.
Warning detected by Coverity. No need for the NULL check, and
removing it silences the warning without any semantic change.
* src/qemu/qemu_migration.c (qemuMigrationFinish): All entries to
endjob had non-NULL vm.
Detected by Coverity. Freeing the wrong variable results in both
a memory leak and the likelihood of the caller dereferencing through
a freed pointer.
* src/rpc/virnettlscontext.c (virNetTLSSessionNew): Free correct
variable.
Coverity detected that 5 of 6 callers of virJSONValueArrayGet checked
for a NULL return; and that by not checking we risk a null deref
during an error. The error is unlikely since the prior call to
virJSONValueArraySize would probably have already caught any botched
JSON array parse, but better safe than sorry.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONGetBlockJobInfo):
Check for NULL.
(qemuMonitorJSONExtractPtyPaths): Fix typo.
Detected by Coverity. We want to compare the result of fnmatch 'rv',
not our pre-set return value 'ret'.
* src/rpc/virnetsaslcontext.c (virNetSASLContextCheckIdentity):
Check correct variable.
Revert 6a1f5f568f. Now that libvirt_iohelper takes fds by
inheritance rather than by open() (commit 1eb66479), there is
no longer a race where the parent can unlink() a file prior to
the iohelper open()ing the same file. From there, it makes
more sense to have the callers both create and unlink, rather
than the caller create and the stream unlink, since the latter
was only needed when iohelper had to do the unlink.
* src/fdstream.h (virFDStreamOpenFile, virFDStreamCreateFile):
Callers are responsible for deletion.
* src/fdstream.c (virFDStreamOpenFileInternal): Don't leak created
file on failure.
(virFDStreamOpenFile, virFDStreamCreateFile): Drop parameter.
* src/lxc/lxc_driver.c (lxcDomainOpenConsole): Update callers.
* src/qemu/qemu_driver.c (qemuDomainScreenshot)
(qemuDomainOpenConsole): Likewise.
* src/storage/storage_driver.c (storageVolumeDownload)
(storageVolumeUpload): Likewise.
* src/uml/uml_driver.c (umlDomainOpenConsole): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainScreenshot): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainOpenConsole): Likewise.
The previous qemu patch could end up calling unlink(tmp) before
tmp was the name of a valid file (unlinking a fileXXXXXX template
instead), or calling unlink(tmp) twice on success (once here,
and once at the end of the stream). Meanwhile, vbox also suffered
from the same leaked tmp file bug.
* src/qemu/qemu_driver.c (qemuDomainScreenshot): Don't unlink on
success, or on invalid name.
* src/vbox/vbox_tmpl.c (vboxDomainScreenshot): Don't leak temp file.
Spotted by Coverity. Gnutls documents that buffer must be NULL
if gnutls_x509_crt_get_key_purpose_oid is to be used to determine
the correct size needed for allocating a buffer.
* src/rpc/virnettlscontext.c
(virNetTLSContextCheckCertKeyPurpose): Initialize buffer.
Spotted by coverity. If pipe2 fails, then we attempt to close
uninitialized fds, which may result in a double-close.
* src/rpc/virnetserver.c (virNetServerSignalSetup): Initialize fds.
Steps to reproduce this problem (vm1 is not running):
for i in `seq 50`; do virsh managedsave vm1& done; killall virsh
Pre-patch, virNetServerClientClose could end up setting client->sock
to NULL prior to other cleanup functions trying to use client->sock.
This fixes things by checking for NULL in more places, and by deferring
the cleanup until after all queued messages have been served.
* src/rpc/virnetserverclient.c (virNetServerClientRegisterEvent)
(virNetServerClientGetFD, virNetServerClientIsSecure)
(virNetServerClientLocalAddrString)
(virNetServerClientRemoteAddrString): Check for closed socket.
(virNetServerClientClose): Rearrange close sequence.
Analysis from Wen Congyang.
This patch adds an internal function openvzGetVEStatus to
get the real state of the domain. This function is used in
various places in the driver, in particular to detect when
the domain has been shut down by the user with the "halt"
command.
Currently, we attempt to run sync job and async job at the same time. It
means that the monitor commands for two jobs can be run in any order.
In the function qemuDomainObjEnterMonitorInternal():
if (priv->job.active == QEMU_JOB_NONE && priv->job.asyncJob) {
if (qemuDomainObjBeginNestedJob(driver, obj) < 0)
We check whether the caller is an async job by priv->job.active and
priv->job.asynJob. But when an async job is running, and a sync job is
also running at the time of the check, then priv->job.active is not
QEMU_JOB_NONE. So we cannot check whether the caller is an async job
in the function qemuDomainObjEnterMonitorInternal(), and must instead
put the burden on the caller to tell us when an async command wants
to do a nested job.
Once the burden is on the caller, then only async monitor enters need
to worry about whether the VM is still running; for sync monitor enter,
the internal return is always 0, so lots of ignore_value can be dropped.
* src/qemu/THREADS.txt: Reflect new rules.
* src/qemu/qemu_domain.h (qemuDomainObjEnterMonitorAsync): New
prototype.
* src/qemu/qemu_process.h (qemuProcessStartCPUs)
(qemuProcessStopCPUs): Add parameter.
* src/qemu/qemu_migration.h (qemuMigrationToFile): Likewise.
(qemuMigrationWaitForCompletion): Make static.
* src/qemu/qemu_domain.c (qemuDomainObjEnterMonitorInternal): Add
parameter.
(qemuDomainObjEnterMonitorAsync): New function.
(qemuDomainObjEnterMonitor, qemuDomainObjEnterMonitorWithDriver):
Update callers.
* src/qemu/qemu_driver.c (qemuDomainSaveInternal)
(qemudDomainCoreDump, doCoreDump, processWatchdogEvent)
(qemudDomainSuspend, qemudDomainResume, qemuDomainSaveImageStartVM)
(qemuDomainSnapshotCreateActive, qemuDomainRevertToSnapshot):
Likewise.
* src/qemu/qemu_process.c (qemuProcessStopCPUs)
(qemuProcessFakeReboot, qemuProcessRecoverMigration)
(qemuProcessRecoverJob, qemuProcessStart): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationToFile)
(qemuMigrationWaitForCompletion, qemuMigrationUpdateJobStatus)
(qemuMigrationJobStart, qemuDomainMigrateGraphicsRelocate)
(doNativeMigrate, doTunnelMigrate, qemuMigrationPerformJob)
(qemuMigrationPerformPhase, qemuMigrationFinish)
(qemuMigrationConfirm): Likewise.
* src/qemu/qemu_hotplug.c: Drop unneeded ignore_value.
whether or not previous return value is -1, the following codes will be
executed for a inactive guest in src/qemu/qemu_driver.c:
ret = virDomainSaveConfig(driver->configDir, persistentDef);
and if everything is okay, 'ret' is assigned to 0, the previous 'ret'
will be overwritten, this patch will fix this issue.
* src/qemu/qemu_driver.c: avoid return value is overwritten when give a argument
in out of blkio weight range for a inactive guest.
* how to reproduce?
% virsh blkiotune ${guestname} --weight 10
% echo $?
Note: guest must be inactive, argument 10 in out of blkio weight range,
and can get a error information by checking libvirtd.log, however,
virsh hasn't raised any error information, and return value is 0.
https://bugzilla.redhat.com/show_bug.cgi?id=726304
Signed-off-by: Alex Jia <ajia@redhat.com>
whether or not previous return value is -1, the following codes will be
executed for a inactive guest in qemuDomainSetMemoryParameters:
ret = virDomainSaveConfig(driver->configDir, persistentDef);
and if everything is okay, 'ret' is assigned to 0, the previous 'ret'
will be overwritten, this patch will fix this issue.
* src/qemu/qemu_driver.c: avoid return value is overwritten when set
min_guarante value to a inactive guest.
* how to reproduce?
% virsh memtune ${guestname} --min_guarante 1024
% echo $?
Note: guest must be inactive, in fact, 'min_guarante' hasn't been implemented
in memory tunable, and I can get the error when check actual libvirtd.log,
however, virsh hasn't raised any error information, and return value is 0.
Signed-off-by: Alex Jia <ajia@redhat.com>
Introduced by f9a837da73, the condition is not changed after
the else clause is removed. So now it quit with "domain is not
running" when the domain is running. However, when the domain is
not running, it reports "no job is active".
How to reproduce:
1)
% virsh start $domain
% virsh domjobabort $domain
error: Requested operation is not valid: domain is not running
2)
% virsh destroy $domain
% virsh domjobabort $domain
error: Requested operation is not valid: no job is active on the domain
3)
% virsh save $domain /tmp/$domain.save
Before above commands finished, try to abort job in another terminal
% virsh domabortjob $domain
error: Requested operation is not valid: domain is not running
Originally noticed by comparing the xml generated by virDomainSave
with the xml produced by reparsing and redumping that xml, but I
also did an audit of every last use of VIR_DOMAIN_XML_INACTIVE in
domain_conf.c to ensure that no other discrepancies exist.
* src/conf/domain_conf.c (virDomainDeviceInfoIsSet): Add
parameter, and update all callers. Make static.
(virDomainNetDefFormat): Skip generated ifname.
(virDomainDefFormatInternal): Skip default <seclabel>.
(virDomainChrSourceDefParseXML): Skip generated pty path, and add
parameter. Update callers.
* src/conf/domain_conf.h (virDomainDeviceInfoIsSet): Delete.
* src/libvirt_private.syms (domain_conf.h): Update.
Using a macro ensures that all the code is looking for the same
prefix.
* src/conf/domain_conf.h (VIR_NET_GENERATED_PREFIX): New macro.
* src/conf/domain_conf.c (virDomainNetDefParseXML): Use it.
* src/uml/uml_conf.c (umlConnectTapDevice): Likewise.
* src/qemu/qemu_command.c (qemuNetworkIfaceConnect): Likewise.
Suggested by Laine Stump.
This is in response to:
https://bugzilla.redhat.com/show_bug.cgi?id=723862
which points out that a guest on an "isolated" network could
potentially exploit the DNS forwarding provided by dnsmasq to create a
communication channel to the outside.
This patch eliminates that possibility by adding the "--no-resolv"
argument to the dnsmasq commandline, which tells dnsmasq to not
forward on any requests that it can't resolve itself (by looking at
its own static hosts files and runtime list of dhcp clients), but to
instead return a failure for those requests.
This shouldn't cause any undesirable change from current
behavior, even in the case where a guest is currently configured with
multiple interfaces, one of them being connected to an isolated
network, and another to a network that does have connectivity to the
outside. If the isolated network's DNS server is queried for a name
it doesn't know, it will return "Refused" rather than "Unknown", which
indicates to the guest that it should query other servers, so it then
queries the connected DNS server, and gets the desired response.
Without this, cygwin failed to compile:
In file included from ../src/rpc/virnetmessage.h:24,
from ../src/rpc/virnetclient.h:27,
from remote/remote_driver.c:31:
../src/rpc/virnetprotocol.h:9:21: error: rpc/rpc.h: No such file or directory
With that fixed, compilation warned:
rpc/virnetsocket.c: In function 'virNetSocketNewListenUNIX':
rpc/virnetsocket.c:347: warning: format '%d' expects type 'int', but argument 8 has type 'gid_t' [-Wformat]
rpc/virnetsocket.c: In function 'virNetSocketGetLocalIdentity':
rpc/virnetsocket.c:743: warning: pointer targets in passing argument 5 of 'getsockopt' differ in signedness
* src/Makefile.am (libvirt_driver_remote_la_CFLAGS)
(libvirt_net_rpc_client_la_CFLAGS)
(libvirt_net_rpc_server_la_CFLAGS): Include XDR_CFLAGS, for rpc
headers on cygwin.
* src/rpc/virnetsocket.c (virNetSocketNewListenUNIX)
(virNetSocketGetLocalIdentity): Avoid compiler warnings.
Commit 3709a386 ported hooks codes to new command execution API,
together with the useful error message removed. Though we can't
get "errbuf" from the new command execution API anymore, still
we can give a more useful error.
https://bugzilla.redhat.com/show_bug.cgi?id=726398
Gettext annoyingly modifies CPPFLAGS in-place, putting
-I/usr/local/include into the search patch if libintl headers
must be used from that location. But since we must support
automake 1.9.6 which lacks AM_CPPFLAGS, and since CPPFLAGS is used
prior to INCLUDES, this means that the build picks up the _old_
installed libvirt.h in priority to the in-tree version, leading
to all sorts of weird build failures on FreeBSD.
Fix this by teaching configure to undo gettext's actions, but
to keep any changes required by gettext at the end of INCLUDES
after all in-tree locations are used first. Also requires
adding a wrapper Makefile.am and making gnulib-tool create
just gnulib.mk files during the bootstrap process.
Signed-off-by: Eric Blake <eblake@redhat.com>
The goal here is that save-image-dumpxml fed back to
save-image-define should not change the save file; anywhere that
this is not the case is probably a bug in domain_conf.c.
* src/qemu/qemu_driver.c (qemuDomainSaveImageGetXMLDesc)
(qemuDomainSaveImageDefineXML): New functions.
(qemuDomainSaveImageOpen): Add parameter.
(qemuDomainRestoreFlags, qemuDomainObjRestore): Adjust clients.
With this, it is possible to update the path to a disk backing
image on either the save or restore action, without having to
binary edit the XML embedded in the state file.
This also modifies virDomainSave to output a smaller xml (only
the inactive xml, which is all the more virDomainRestore parses),
while still guaranteeing padding for most typical abi-compatible
xml replacements, necessary so that the next patch for
virDomainSaveImageDefineXML will not cause unnecessary
modifications to the save image file.
* src/qemu/qemu_driver.c (qemuDomainSaveInternal): Add parameter,
only use inactive state, and guarantee padding.
(qemuDomainSaveImageOpen): Add parameter.
(qemuDomainSaveFlags, qemuDomainManagedSave)
(qemuDomainRestoreFlags, qemuDomainObjRestore): Update callers.
I went with the shorter license notice used by src/libvirt.c,
rather than spelling out the full LGPLv2+ clause into each of
these files.
* configure.ac: Declare copyright.
* all Makefile.am: Likewise.
Found by:
for f in $(sed -n 's/.*Drv[^ ]* \([^;]*\);.*/\1/p' src/xen/xen_driver.h)
do
git grep "\(\.\|->\)$f\b" src/xen
done | cat
and looking through the resulting list to see which callback struct
members are still necessary.
* src/xen/xen_driver.h (xenUnifiedDriver): Drop all callbacks that
are only used directly.
* src/xen/xen_hypervisor.c (xenHypervisorDriver): Shrink list.
* src/xen/xen_inotify.c (xenInotifyDriver): Likewise.
* src/xen/xend_internal.c (xenDaemonDriver): Likewise.
* src/xen/xm_internal.c (xenXMDriver): Likewise.
* src/xen/xs_internal.c (xenStoreDriver): Likewise.
No need to use a for loop if we know there is exactly one client.
Found by:
for f in $(sed -n 's/.*Drv[^ ]* \([^;]*\);.*/\1/p' src/xen/xen_driver.h)
do
git grep "\(\.\|->\)$f\b" src/xen
done | cat
and looking through the resulting list to see which callback struct
members are used exactly once. The next patch will ensure that we
don't reintroduce uses of these callbacks.
* src/xen/xen_driver.c (xenUnifiedClose): Call close
unconditionally, to match xenUnifiedOpen.
(xenUnifiedNodeGetInfo, xenUnifiedDomainCreateXML)
(xenUnifiedDomainSave, xenUnifiedDomainRestore)
(xenUnifiedDomainCoreDump, xenUnifiedDomainUpdateDeviceFlags):
Make direct call to lone implementation.
* src/xen/xend_internal.h (xenDaemonDomainCoreDump)
(xenDaemonUpdateDeviceFlags, xenDaemonCreateXML): Add prototypes.
* src/xen/xend_internal.c (xenDaemonDomainCoreDump)
(xenDaemonUpdateDeviceFlags, xenDaemonCreateXML): Export.
The callback struct is great when iterating through several
possibilities, but when calling a known callback, it's just
overhead. We can make the direct call in those cases.
* src/xen/xen_driver.c (xenUnifiedOpen, xenUnifiedDomainSuspend)
(xenUnifiedDomainResume, xenUnifiedDomainDestroyFlags): Make
direct calls instead of going through callback.
Using C99 initializers and xen-specific prefixes will make it
so that future patches are less likely to add callback members
to the xenUnifiedDriver struct, since the goal is to get rid
of the callback struct in the first place.
* src/xen/xen_driver.h (xenUnifiedDriver): Rename all struct
members, to make it obvious which ones are still in use.
* src/xen/xen_driver.c: Update all callers.
* src/xen/xen_hypervisor.c (xenHypervisorDriver): Rewrite with C99
initializers.
* src/xen/xend_internal.c (xenDaemonDriver): Likewise.
* src/xen/xs_internal.c (xenStoreDriver): Likewise.
* src/xen/xm_internal.c (xenXMDriver): Likewise.
* src/xen/xen_inotify.c (xenInotifyDriver): Likewise.
This failure was introduced by commit dacee3d, which removed
listenAddr from the unions in virDomainGraphicsDef in favor of putting
it in the address attribute of virDomainGraphicsListenDef.
The domain XML now understands the <listen> subelement of its
<graphics> element (including when listen type='network'), and the
network driver has an internal API that will turn a network name into
an IP address, so the final logical step is to put the glue into the
qemu driver so that when it is starting up a domain, if it finds
<listen type='network' network='xyz'/> in the XML, it will call the
network driver to get an IPv4 address associated with network xyz, and
tell qemu to listen for vnc (or spice) on that address rather than the
default address (localhost).
The motivation for this is that a large installation may want the
guests' VNC servers listening on physical interfaces rather than
localhost, so that users can connect directly from the outside; this
requires sending qemu the appropriate IP address to listen on. But
this address will of course be different for each host, and if a guest
might be migrated around from one host to another, it's important that
the guest's config not have any information embedded in it that is
specific to one particular host. <listen type='network.../> can solve
this problem in the following manner:
1) on each host, define a libvirt network of the same name,
associated with the interface on that host that should be used
for listening (for example, a simple macvtap network: <forward
mode='bridge' dev='eth0'/>, or host bridge network: <forward
mode='bridge'/> <bridge name='br0'/>
2) in the <graphics> element of each guest's domain xml, tell vnc to
listen on the network name used in step 1:
<graphics type='vnc' port='5922'>
<listen type='network'network='example-net'/>
</graphics>
(all the above also applies for graphics type='spice').
Once it's plugged in, the <listen> element will be an optional
replacement for the "listen" attribute that graphics elements already
have. If the <listen> element is type='address', it will have an
attribute called 'address' which will contain an IP address or dns
name that the guest's display server should listen on. If, however,
type='network', the <listen> element should have an attribute called
'network' that will be set to the name of a network configuration to
get the IP address from.
* docs/schemas/domain.rng: updated to allow the <listen> element
* docs/formatdomain.html.in: document the <listen> element and its
attributes.
* src/conf/domain_conf.[hc]:
1) The domain parser, formatter, and data structure are modified to
support 0 or more <listen> subelements to each <graphics>
element. The old style "legacy" listen attribute is also still
accepted, and will be stored internally just as if it were a
separate <listen> element. On output (i.e. format), the address
attribute of the first <listen> element of type 'address' will be
duplicated in the legacy "listen" attribute of the <graphic>
element.
2) The "listenAddr" attribute has been removed from the unions in
virDomainGRaphicsDef for graphics types vnc, rdp, and spice.
This attribute is now in the <listen> subelement (aka
virDomainGraphicsListenDef)
3) Helper functions were written to provide simple access
(both Get and Set) to the listen elements and their attributes.
* src/libvirt_private.syms: export the listen helper functions
* src/qemu/qemu_command.c, src/qemu/qemu_hotplug.c,
src/qemu/qemu_migration.c, src/vbox/vbox_tmpl.c,
src/vmx/vmx.c, src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c
Modify all these files to use the listen helper functions rather
than directly referencing the (now missing) listenAddr
attribute. There can be multiple <listen> elements to a single
<graphics>, but the drivers all currently only support one, so all
replacements of direct access with a helper function indicate index
"0".
* tests/* - only 3 of these are new files added explicitly to test the
new <listen> element. All the others have been modified to reflect
the fact that any legacy "listen" attributes passed in to the domain
parse will be saved in a <listen> element (i.e. one of the
virDomainGraphicsListenDefs), and during the domain format function,
both the <listen> element as well as the legacy attributes will be
output.
On RHEL 5, with gcc 4.1.2:
rpc/virnetsaslcontext.c: In function 'virNetSASLSessionUpdateBufSize':
rpc/virnetsaslcontext.c:396: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
* src/rpc/virnetsaslcontext.c (virNetSASLSessionUpdateBufSize):
Use a union to work around gcc warning.
qemuMigrationUpdateJobStatus (called in a loop by migration
and save tasks) uses qemuDomainObjEnterMonitorWithDriver;
however, that function ended up starting a nested job without
releasing the driver.
Since no one else is making nested calls, we can inline the
internal functions to properly track driver_locked.
* src/qemu/qemu_domain.h (qemuDomainObjBeginNestedJob)
(qemuDomainObjBeginNestedJobWithDriver)
(qemuDomainObjEndNestedJob): Drop unused prototypes.
* src/qemu/qemu_domain.c (qemuDomainObjEnterMonitorInternal):
Reflect driver lock to nested job.
(qemuDomainObjBeginNestedJob)
(qemuDomainObjBeginNestedJobWithDriver)
(qemuDomainObjEndNestedJob): Drop unused functions.
As written in virStorageFileGetMetadataFromFD decription, caller
must free metadata after use. Qemu driver miss this and therefore
leak metadata which can grow to huge mem leak if somebody query
for blockInfo a lot.
* tools/virsh.c: avoid memory leak in cmdVolPath.
* src/libvirt.c: Add doc for virStorageVolGetPath to tell one
must free() the returned path after use.
* how to reproduce?
% dd if=/dev/zero of=/var/lib/libvirt/images/foo.img count=1 bs=10M
% virsh pool-refresh default
% valgrind -v --leak-check=full virsh vol-path --vol \
/var/lib/libvirt/images/foo.img
* actual results:
Detected in valgrind run:
==16436== 32 bytes in 1 blocks are definitely lost in loss record 7 of 22
==16436== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==16436== by 0x386A314B3D: xdr_string (in /lib64/libc-2.12.so)
==16436== by 0x3DF8CD770D: xdr_remote_nonnull_string (remote_protocol.c:3
==16436== by 0x3DF8CD7EC8: xdr_remote_storage_vol_get_path_ret
% virsh pool-refresh default
% valgrind -v --leak-check=full virsh vol-path --vol \
/var/lib/libvirt/images/foo.img
Signed-off-by: Alex Jia <ajia@redhat.com>
The error in getCompressionType will never be reported, change
the errors codes into warning (VIR_WARN("%s", _(foo)); doesn't break
syntax-check rule), and also improve the docs in qemu.conf to tell
user the truth.
Make MIGRATION_OUT use the new helper methods.
This also introduces new protection to migration v3 process: the
migration job is held from Begin to Confirm to avoid changes to a domain
during migration (esp. between Begin and Perform phases). This change is
automatically applied to p2p and tunneled migrations. For normal
migration, this requires support from a client. In other words, if an
old (pre 0.9.4) client starts normal migration of a domain, the domain
will not be protected against changes between Begin and Perform steps.
Without this, a configure built by autoconf 2.59 was broken when
trying to detect which compiler warning flags were supported.
* .gnulib: Update to latest, for warnings.m4 fix.
* bootstrap.conf: Add fclose explicitly, to match recent gnulib
implicit dependency changes.
* src/qemu/qemu_conf.c (includes): Drop unused include.
* src/uml/uml_conf.c (include): Likewise.
Reported by Daniel P. Berrange.
Every DomainNetDef has a bandwidth, as does every portgroup.
Whenever a DomainNetDef of type NETWORK is about to be used, a call is
made to networkAllocateActualDevice(). This function chooses the "best"
bandwidth object and places it in the DomainActualNetDef.
From that point on, whenever some code needs to use the bandwidth data
for the interface, it's retrieved with virDomainNetGetActualBandwidth(),
which will always return the "best" info as determined in the
previous step.
When an incoming RPC message is ready for processing,
virNetServerClientDispatchRead()
will invoke the 'dispatchFunc' callback. This is set to
virNetServerDispatchNewMessage
This function puts the message + client in a queue for processing by the thread
pool. The thread pool worker function is
virNetServerHandleJob
The first thing this does is acquire an extra reference on the 'client'.
Unfortunately, between the time the message+client are put on the thread pool
queue, and the time the worker runs, the client object may have had its last
reference removed.
We clearly need to add the reference to the client object before putting the
client on the processing queue
* src/rpc/virnetserverclient.c: Add a reference to the client when
invoking the dispatch function
* src/rpc/virnetserver.c: Don't acquire a reference to the client
when in the worker thread
The cpu bandwidth is applied at the vcpu group level. We should apply it
at the vm group level too, because the vm may do heavy I/O, and it will affect
the other vm.
We apply cpu bandwidth at the vcpu and the vm group level, so we must ensure
that max(child_quota) <= parent_quota when we modify cpu bandwidth.
The virNetSASLContext, virNetSASLSession, virNetTLSContext and
virNetTLSSession classes previously relied in their owners
(virNetClient / virNetServer / virNetServerClient) to provide
locking protection for concurrent usage. When virNetSocket
gained its own locking code, this invalidated the implicit
safety the SASL/TLS modules relied on. Thus we need to give
them all explicit locking of their own via new mutexes.
* src/rpc/virnetsaslcontext.c, src/rpc/virnettlscontext.c: Add
a mutex per object
When setting up a server socket, we must skip EADDRINUSE errors
from bind, since the IPv6 socket bind may have already bound to
the IPv4 socket too. If we don't manage to bind to any sockets
at all though, we should then report the EADDRINUSE error as
normal.
This fixes the case where libvirtd would not exit if some other
program was listening on its TCP/TLS ports.
* src/rpc/virnetsocket.c: Report EADDRINUSE
Now that virDomainSetVcpusFlags knows about VIR_DOMAIN_AFFECT_CURRENT,
so should virDomainGetVcpusFlags.
Unfortunately, the virsh counterpart 'virsh vcpucount' has already
commandeered --current for a different meaning, so teaching virsh
to expose this in the next patch will require a bit of care.
* src/libvirt.c (virDomainGetVcpusFlags): Allow
VIR_DOMAIN_AFFECT_CURRENT.
* src/libxl/libxl_driver.c (libxlDomainGetVcpusFlags): Likewise.
* src/qemu/qemu_driver.c (qemudDomainGetVcpusFlags): Likewise.
* src/test/test_driver.c (testDomainGetVcpusFlags): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainGetVcpusFlags): Likewise.
Although most functions in libvirt return 0 on success and < 0 on
failure, there are a few functions lingering around that return errno
(a positive value) on failure, and sometimes code calling those
functions incorrectly assumes the <0 standard. I noticed one of these
the other day when auditing networkStartDhcpDaemon after Guido Gunther
found a place where success was improperly returned on failure (that
patch has been acked and is pending a push). The problem was that it
expected the return value from virFileReadPid to be < 0 on failure,
but it was actually positive (it was also neglected to set the return
code in this case, similar to the bug found by Guido).
This all led to the fact that *all* of the virFile*Pid functions in
util.c are returning errno on failure. This patch remedies that
problem by changing them all to return -errno on failure, and makes
any necessary changes to callers of the functions. (In the meantime, I
also properly set the return code on failure of virFileReadPid in
networkStartDhcpDaemon).
In the XML file we now have
<cputune>
<shares>1024</shares>
<period>90000</period>
<quota>0</quota>
</cputune>
But the schedinfo parameter are being named
cpu_shares: 1024
cfs_period: 90000
cfs_quota: 0
The period/quota is per-vcpu value, so these new tunables should be named
'vcpu_period' and 'vcpu_quota'.
These functions parse given XML node and return pointer to the
output. Unknown elements are silently ignored. Attributes must
be integer and must fit in unsigned long long.
Free function frees elements of virBandwidth structure.
The new listenNetwork attribute needs to learn an IP address based on a
named network. This patch provides a function networkGetNetworkAddress
which provides that.
Some networks have an IP address explicitly in their configuration
(ie, those with a forward type of "none", "route", or "nat"). For
those, we can just return the IP address from the config.
The rest will have a physical device associated with them (either via
<bridge name='...'/>, <forward ... dev='...'/>, or possibly via a pool
of interfaces inside the network's <forward> element) and we will need
to ask the kernel for a current IP address of that device (via the
newly added ifaceGetIPAddress)
If networkGetNetworkAddress encounters an error while trying to learn
the address for a network, it will return -1. In the case that libvirt
has been compiled without the network driver, the call is a macro
which reduces to -2. This allows differentiating between a failure of
the network driver, and its complete absence.
This function uses ioctl(SIOCGIFADDR), which limits it to returning
the first IPv4 address of an interface, but that's what we want right
now (the place we're going to use the address only accepts one).
The sanlock plugin for libvirt expects the directory
/var/lib/libvirt/sanlock to exist. Create this and add
it to the RPM
* libvirt.spec.in: Add /var/lib/libvirt/sanlock
* src/Makefile.am: Create /var/lib/libvirt/sanlock
A container should not be allowed to modify stuff in /sys
or /proc/sys so make them readonly. Make /selinux readonly
so that containers think that selinux is disabled.
Honour the readonly flag when mounting container filesystems
from the guest XML config
* src/lxc/lxc_container.c: Support readonly mounts
Even in non-virtual root filesystem mode we should be mounting
more than just a new /proc. Refactor lxcContainerMountBasicFS
so that it does everything except for /dev and /dev/pts moving
that into lxcContainerMountDevFS. Pass in a source prefix
to lxcContainerMountBasicFS() so it can be used in both shared
root and private root modes.
* src/lxc/lxc_container.c: Unify mounting code for special
filesystems
The bind mount setup is about to get more complicated.
To avoid having to deal with several copies, pull it
out into a separate lxcContainerMountFSBind method.
Also pull out the iteration over container filesystems,
so that it will be easier to drop in support for non-bind
mount filesystems
* src/lxc/lxc_container.c: Pull bind mount code out into
lxcContainerMountFSBind
When libvirtd starts it it will sanity check its own certs,
and before libvirt clients connect to a remote server they
will sanity check their own certs. This patch allows such
sanity checking to be skipped. There is no strong reason to
need to do this, other than to bypass possible libvirt bugs
in sanity checking, or for testing purposes.
libvirt.conf gains tls_no_sanity_certificate parameter to
go along with tls_no_verify_certificate. The remote driver
client URIs gain a no_sanity URI parameter
* daemon/test_libvirtd.aug, daemon/libvirtd.conf,
daemon/libvirtd.c, daemon/libvirtd.aug: Add parameter to
allow cert sanity checks to be skipped
* src/remote/remote_driver.c: Add no_sanity parameter to
skip cert checks
* src/rpc/virnettlscontext.c, src/rpc/virnettlscontext.h:
Add new parameter for skipping sanity checks independantly
of skipping session cert validation checks
Also prepend $(AM_V_GEN) to the command line, mark virkeycode-mapgen.py
as executable and switch the shebang line from /bin/python to the
commonly use /usr/bin/python.
All of the functions in util/interface.c were returning 0 on success,
but some returned -1 on error, and some returned a positive value
(usually the value of errno, but sometimes just 1). Libvirt's standard
is to return < 0 on error (in the case of functions that need to
return errno, -errno is returned.
This patch modifies all functions in interface.c to consistently
return < 0 on error, and makes changes to callers of those functions
where necessary.
There is some commonality between the code for sanity checking
certs when initializing libvirt and the code for validating
certs during a live TLS session handshake. This patchset splits
up the sanity checking function into several smaller functions
each doing a specific type of check. The cert validation code
is then updated to also call into these functions
* src/rpc/virnettlscontext.c: Refactor cert validation code
The gnutls_certificate_type_set_priority method is deprecated.
Since we already set the default gnutls priority, it was not
serving any useful purpose and can be removed
* src/rpc/virnettlscontext.c: Remove gnutls_certificate_type_set_priority
call
If the virStateInitialize call fails we must shutdown libvirtd
since drivers will not be available. Just free'ing the virNetServer
is not sufficient, we must send a SIGTERM to ourselves so that
we interrupt the event loop and trigger a orderly shutdown
* daemon/libvirtd.c: Kill ourselves if state init fails
* src/rpc/virnetserver.c: Add some debugging to event loop
When an operation started by virDomainBlockPull completes (either with
success or with failure), raise an event to indicate the final status.
This API allow users to avoid polling on virDomainGetBlockJobInfo if
they would prefer to use an event mechanism.
* daemon/remote.c: Dispatch events to client
* include/libvirt/libvirt.h.in: Define event ID and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle the new event
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for block_stream completion and emit a libvirt block pull event
* src/remote/remote_driver.c: Receive and dispatch events to application
* src/remote/remote_protocol.x: Wire protocol definition for the event
* src/remote_protocol-structs: structure definitions for protocol verification
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for BLOCK_STREAM_COMPLETED event
from QEMU monitor
The virDomainBlockPull* family of commands are enabled by the
following HMP/QMP commands: 'block_stream', 'block_job_cancel',
'info block-jobs' / 'query-block-jobs', and 'block_job_set_speed'.
* src/qemu/qemu_driver.c src/qemu/qemu_monitor_text.[ch]: implement disk
streaming by using the proper qemu monitor commands.
* src/qemu/qemu_monitor_json.[ch]: implement commands using the qmp monitor
The generator can handle everything except virDomainGetBlockJobInfo().
* src/remote/remote_protocol.x: provide defines for the new entry points
* src/remote/remote_driver.c daemon/remote.c: implement the client and
server side for virDomainGetBlockJobInfo.
* src/remote_protocol-structs: structure definitions for protocol verification
* src/rpc/gendispatch.pl: Permit some unsigned long parameters
Set up the types for the block pull functions and insert them into the
virDriver structure definition. Symbols are exported in this patch to
prevent
documentation compile failures.
* include/libvirt/libvirt.h.in: new API
* src/driver.h: add the new entry to the driver structure
* python/generator.py: fix compiler errors, the actual python bindings
* are
implemented later
* src/libvirt_public.syms: export symbols
* docs/apibuild.py: Extend 'unsigned long' parameter exception to this
* API
Modifying the xml on either save or restore only gets you so
far - you have to remember to 'virsh dumpxml dom' just prior
to the 'virsh save' in order to have an xml file worth modifying
that won't be rejected due to abi breaks. To make this more
powerful, we need a way to grab the xml embedded within a state
file, and from there, it's not much harder to also support
modifying a state file in-place.
Also, virDomainGetXMLDesc didn't document its flags.
* include/libvirt/libvirt.h.in (virDomainSaveImageGetXMLDesc)
(virDomainSaveImageDefineXML): New prototypes.
* src/libvirt.c (virDomainSaveImageGetXMLDesc)
(virDomainSaveImageDefineXML): New API.
* src/libvirt_public.syms: Export them.
* src/driver.h (virDrvDomainSaveImageGetXMLDesc)
(virDrvDomainSaveImgeDefineXML): New driver callbacks.
When auto-dumping a domain on crash events, or autostarting a domain
with managed save state, let the user configure whether to imply
the bypass cache flag.
* src/qemu/qemu.conf (auto_dump_bypass_cache, auto_start_bypass_cache):
Document new variables.
* src/qemu/libvirtd_qemu.aug (vnc_entry): Let augeas parse them.
* src/qemu/qemu_conf.h (qemud_driver): Store new preferences.
* src/qemu/qemu_conf.c (qemudLoadDriverConfig): Parse them.
* src/qemu/qemu_driver.c (processWatchdogEvent, qemuAutostartDomain):
Honor them.
Wire together the previous patches to support file system cache
bypass during API save/restore requests in qemu.
* src/qemu/qemu_driver.c (qemuDomainSaveInternal, doCoreDump)
(qemudDomainObjStart, qemuDomainSaveImageOpen, qemuDomainObjRestore)
(qemuDomainObjStart): Add parameter.
(qemuDomainSaveFlags, qemuDomainManagedSave, qemudDomainCoreDump)
(processWatchdogEvent, qemudDomainStartWithFlags, qemuAutostartDomain)
(qemuDomainRestoreFlags): Update callers.
O_DIRECT has stringent requirements. Rather than make lots of changes
at each site that wants to use O_DIRECT, it is easier to offload
the work through a helper process that mirrors the I/O between a
pipe and the actual direct fd, so that the other end of the pipe
no longer has to worry about constraints.
Plus, if the kernel ever gains better posix_fadvise support, then we
only have to touch a single file to let all callers benefit from a
more efficient way to avoid file system caching.
* src/util/virfile.h (virFileDirectFdFlag, virFileDirectFdNew)
(virFileDirectFdClose, virFileDirectFdFree): New prototypes.
* src/util/virdirect.c: Implement new wrapper object.
* src/libvirt_private.syms (virfile.h): Export new symbols.
* cfg.mk (useless_free_options): Add to list.
* po/POTFILES.in: Add new translations.
Required for a coming patch where iohelper will operate on O_DIRECT
fds. There, the user-space memory must be aligned to file system
boundaries (at least 512, but using page-aligned works better, and
some file systems prefer 64k). Made tougher by the fact that
VIR_ALLOC won't work on void *, but posix_memalign won't work on
char * and isn't available everywhere.
This patch makes some simplifying assumptions - namely, output
to an O_DIRECT fd will only be attempted on an empty seekable
file (hence, no need to worry about preserving existing data
on a partial block, and ftruncate will work to undo the effects
of having to round up the size of the last block written), and
input from an O_DIRECT fd will only be attempted on a complete
seekable file with the only possible short read at EOF.
* configure.ac (AC_CHECK_FUNCS_ONCE): Check for posix_memalign.
* src/util/iohelper.c (runIO): Use aligned memory, and handle
quirks of O_DIRECT on last write.
Rather than making the iohelper subject to a race in reopening
the file, it is nicer to pass an already-open fd by inheritance.
The old synopsis form must continue to work - if someone updates
their libvirt package and installs a new libvirt_iohelper but
without restarting the old libvirtd daemon, then the daemon can
still make calls using the old syntax but the new iohelper.
* src/util/iohelper.c (runIO): Split code for open...
(prepare): ...to new function.
(usage): Update synopsis.
(main): Allow alternate calling form.
* src/fdstream.c (virFDStreamOpenFileInternal): Use alternate form.
For all hypervisors that support save and restore, the new API
now performs the same functions as the old.
VBox is excluded from this list, because its existing domainsave
is broken (there is no corresponding domainrestore, and there
is no control over the filename used in the save). A later
patch should change vbox to use its implementation for
managedsave, and teach start to use managedsave results.
* src/libxl/libxl_driver.c (libxlDomainSave): Move guts...
(libxlDomainSaveFlags): ...to new function.
(libxlDomainRestore): Move guts...
(libxlDomainRestoreFlags): ...to new function.
* src/test/test_driver.c (testDomainSave, testDomainSaveFlags)
(testDomainRestore, testDomainRestoreFlags): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainSave)
(xenUnifiedDomainSaveFlags, xenUnifiedDomainRestore)
(xenUnifiedDomainRestoreFlags): Likewise.
* src/qemu/qemu_driver.c (qemudDomainSave, qemudDomainRestore):
Rename and move guts.
(qemuDomainSave, qemuDomainSaveFlags, qemuDomainRestore)
(qemuDomainRestoreFlags): ...here.
(qemudDomainSaveFlag): Rename...
(qemuDomainSaveInternal): ...to this, and update callers.
VIR_ERR_INVALID_ARG implies that an argument cannot possibly
be correct, given the current state of the API.
VIR_ERR_CONFIG_UNSUPPORTED implies that a configuration is
wrong, but arguments aren't configuration.
VIR_ERR_NO_SUPPORT implies that a function is completely
unimplemented.
But in the case of a function that is partially implemented,
yet the full power of the API is not available for that
driver, none of the above messages make sense. Hence a new
error message, implying that the argument is known to comply
with the current state of the API, and that while the driver
supports aspects of the function, it does not support that
particular use of the argument.
A good use case for this is a driver that supports
virDomainSaveFlags, but not the dxml argument of that API.
It might be feasible to also use this new error for all functions
that check flags, and which accept fewer flags than what is possible
in the public API. But doing so would get complicated, since
neither libvirt.c nor the remote driver may do flag filtering,
and every other driver would have to do a two-part check, first
using virCheckFlags on all public flags (which gives
VIR_ERR_INVALID_ARG for an impossible flag), followed by a
particular mask check for VIR_ERR_ARGUMENT_UNSUPPORTED (for a
possible public flag but unsupported by this driver).
* include/libvirt/virterror.h (VIR_ERR_ARGUMENT_UNSUPPORTED): New
error.
* src/util/virterror.c (virErrorMsg): Give it a message.
Suggested by Daniel P. Berrange.
Build failure on xenapi_driver from compiler warnings (flags was unused).
Build failure on xen (incorrect number of arguments). And in fixing
that, I obeyed the comments of struct xenUnifiedDriver that state
that we want to minimize the number of callback functions in that
struct, not add to it.
* src/xen/xen_driver.c (xenUnifiedDomainDestroyFlags): Use correct
arguments.
(xenUnifiedDomainDestroy): Simplify.
* src/xen/xen_driver.h (xenUnifiedDriver): Remove unused callback.
* src/xen/xen_hypervisor.c (xenHypervisorDestroyDomain): Likewise.
* src/xen/xend_internal.c (xenDaemonDomainDestroy): Likewise.
* src/xen/xend_internal.h (xenDaemonDomainDestroyFlags): Likewise.
* src/xen/xm_internal.c (xenXMDriver): Likewise.
* src/xen/xs_internal.c (xenStoreDriver): Likewise.
* src/xen/xen_inotify.c (xenInotifyDriver): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainDestroyFlags): Reject
unknown flags.
The network driver needs to assign physical devices for use by modes
that use macvtap, keeping track of which physical devices are in use
(and how many instances, when the devices can be shared). Three calls
are added:
networkAllocateActualDevice - finds a physical device for use by the
domain, and sets up the virDomainActualNetDef accordingly.
networkNotifyActualDevice - assumes that the domain was already
running, but libvirtd was restarted, and needs to be notified by each
already-running domain about what interfaces they are using.
networkReleaseActualDevice - decrements the usage count of the
allocated physical device, and frees the virDomainActualNetDef to
avoid later accidentally using the device.
bridge_driver.[hc] - the new APIs. When WITH_NETWORK is false, these
functions are all #defined to be "0" in the .h file (effectively
becoming a NOP) to prevent link errors.
qemu_(command|driver|hotplug|process).c - add calls to the above APIs
in the appropriate places.
tests/Makefile.am - we need to include libvirt_driver_network.la
whenever libvirt_driver_qemu.la is linked, to avoid unreferenced
symbols (in functions that are never called by the test
programs...)
This is the one function outside of domain_conf.c that plays around
with (even modifying) the internals of the virDomainNetDef, and thus
can't be fixed up simply by replacing direct accesses to the fields of
the struct with the GetActual*() access functions.
In this case, we need to check if the defined type is "network", and
if it is *then* check the actual type; if the actual type is "bridge",
then we can at least put the bridgename in a place where it can be
used; otherwise (if type isn't "bridge"), we behave exactly as we used
to - just null out *everything*.
The qemu driver accesses fields in the virDomainNetDef directly, but
with the advent of the virDomainActualNetDef, some pieces of
information may be found in a different place (the ActualNetDef) if
the network connection is of type='network' and that network is of
forward type='bridge|private|vepa|passthrough'. The previous patch
added functions to mask this difference from callers - they hide the
decision making process and just pick the value from the proper place.
This patch uses those functions in the qemu driver as a first step in
making qemu work with the new network types. At this point, the
virDomainActualNetDef is guaranteed always NULL, so the GetActualX()
function will return exactly what the def->X that's being replaced
would have returned (ie bisecting is not compromised).
There is one place (in qemu_driver.c) where the internal details of
the NetDef are directly manipulated by the code, so the GetActual
functions cannot be used there without extra additional code; that
file will be treated in a separate patch.
Previously all networks were composed of bridge devices created and
managed by libvirt, and the same operations needed to be done for all
of them when they were started and stopped (create and start the
bridge device, configure its MAC address and IP address, add iptables
rules). The new network types are (for now at least) managed outside
of libvirt, and the network object is used only to contain information
about the network, which is then used as each individual guest
connects itself.
This means that when starting/stopping one of these new networks, we
really want to do nothing, aside from marking the network as
active/inactive.
This has been setup as toplevel Start/Shutdown functions that do the
small bit of common stuff, then have a switch statement to execute
network type-specific start/shutdown code, then do a bit more common
code. The type-specific functions called for the new host bridge and
macvtap based types are currently empty.
In the future these functions may actually do something, and we will
surely add more functions that are similarly patterned. Once
everything has settled, we can make a table of "sub-driver" function
pointers for each network type, and store a pointer to that table in
the network object, then we can replace the switch statements with
calls to functions in the table.
The final step in this will be to add a new table (and corresponding
new functions) for new network types as they are added.
The network XML is updated in the following ways:
1) The <forward> element can now contain a list of forward interfaces:
<forward .... >
<interface dev='eth10'/>
<interface dev='eth11'/>
<interface dev='eth12'/>
<interface dev='eth13'/>
</forward>
The first of these takes the place of the dev attribute that is
normally in <forward> - when defining a network you can specify
either one, and on output both will be present. If you specify
both on input, they must match.
2) In addition to forward modes of 'nat' and 'route', these new modes
are supported:
private, passthrough, vepa - when this network is referenced by a
domain's interface, it will have the same effect as if the
interface had been defined as type='direct', e.g.:
<interface type='direct'>
<source mode='${mode}' dev='${dev}>
...
</interface>
where ${mode} is one of the three new modes, and ${dev} is an interface
selected from the list given in <forward>.
bridge - if a <forward> dev (or multiple devs) is defined, and
forward mode is 'bridge' this is just like the modes 'private',
'passthrough', and 'vepa' above. If there is no forward dev
specified but a bridge name is given (e.g. "<bridge
name='br0'/>"), then guest interfaces using this network will use
libvirt's "host bridge" mode, equivalent to this:
<interface type='bridge'>
<source bridge='${bridge-name}'/>
...
</interface>
3) A network can have multiple <portgroup> elements, which may be
selected by the guest interface definition (by adding
"portgroup='${name}'" in the <source> element along with the
network name). Currently a portgroup can only contain a
virtportprofile, but the intent is that other configuration items
may be put there int the future (e.g. bandwidth config). When
building a guest's interface, if the <interface> XML itself has no
virtportprofile, and if the requested network has a portgroup with
a name matching the name given in the <interface> (or if one of the
network's portgroups is marked with the "default='yes'" attribute),
the virtportprofile from that portgroup will be used by the
interface.
4) A network can have a virtportprofile defined at the top level,
which will be used by a guest interface when connecting in one of
the 'direct' modes if the guest interface XML itself hasn't
specified any virtportprofile, and if there are also no matching
portgroups on the network.
the domain XML <interface> element is updated in the following ways:
1) <virtualportprofile> can be specified when source type='network'
(previously it was only valid for source type='direct')
2) A new attribute "portgroup" has been added to the <source>
element. When source type='network' (the only time portgroup is
recognized), extra configuration information will be taken from the
<portgroup> element of the given name in the network definition.
3) Each virDomainNetDef now also potentially has a
virDomainActualNetDef which is a private object (never
exported/imported via the public API, and not defined in the RNG) that
is used to maintain information about the physical device that was
actually used for a NetDef of type VIR_DOMAIN_NET_TYPE_NETWORK.
The virDomainActualNetDef will only be parsed/formatted if the
parse/format function is called with the
VIR_DOMAIN_XML_INTERNAL_ACTUAL_NET flag set (which is only needed when
saving/loading a running domain's state info to the stateDir).
The virtPortProfile in the domain interface struct is now a separately
allocated object *pointed to by* (rather than contained in) the main
virDomainNetDef object. This is done to make it easier to figure out
when a virtualPortProfile has/hasn't been specified in a particular
config.
virtPortProfiles are currently only used in the domain XML, but will
soon also be used in the network XML. To prepare for that change, this
patch moves the structure definition into util/network.h and the parse
and format functions into util/network.c (I decided that this was a
better choice than macvtap.h/c for something that needed to always be
available on all platforms).
This introduces new API virDomainDestroyFlags to allow
domain destroying with flags, as the existing API virDomainDestroy
misses flags.
The set of flags is defined in virDomainDestroyFlagsValues enum,
which is currently commented, because it is empty.
Calling this API with no flags set (@flags == 0) is equivalent calling
virDomainDestroy.
In order to choose whether to use O_DIRECT when saving a domain image
to a file, we need a new flag. But virDomainSave was implemented
before our policy of all new APIs having a flag argument. Likewise
for virDomainRestore when restoring from a file.
The new flag name is chosen as CACHE_BYPASS so as not to preclude
a future solution that uses posix_fadvise once the Linux kernel has
a smarter implementation of that interface.
* include/libvirt/libvirt.h.in (virDomainCreateFlags)
(virDomainCoreDumpFlags): Add a flag.
(virDomainSaveFlags, virDomainRestoreFlags): New prototypes.
* src/libvirt.c (virDomainSaveFlags, virDomainRestoreFlags): New API.
* src/libvirt_public.syms: Export them.
* src/driver.h (virDrvDomainSaveFlags, virDrvDomainRestoreFlags):
New driver callbacks.
Otherwise, an ABI mismatch gives error messages attributing the target
xml string as current, and the current domain state as the new xml.
* src/qemu/qemu_migration.c (qemuMigrationBegin): Use correct
argument order.
Since libvirt is multi-threaded, we should use FD_CLOEXEC as much
as possible in the parent, and only relax fds to inherited after
forking, to avoid leaking an fd created in one thread to a fork
run in another thread. This gets us closer to that ideal, by
making virCommand automatically clear FD_CLOEXEC on fds intended
for the child, as well as avoiding a window of time with non-cloexec
pipes created for capturing output.
* src/util/command.c (virExecWithHook): Use CLOEXEC in parent. In
child, guarantee that all fds to pass to child are inheritable.
(getDevNull): Use CLOEXEC.
(prepareStdFd): New helper function.
(virCommandRun, virCommandRequireHandshake): Use pipe2.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Simplify caller.
We already have a precedent of function documentation in C files,
where it is closer to the implementation (witness libvirt.h vs.
libvirt.c); maintaining docs in both files risks docs going stale.
While I was at it, I used consistent doxygen style on all comments.
* src/util/command.h: Remove duplicate docs, and move unique
documentation...
* src/util/command.c: ...here.
Suggested by Matthias Bolte.
The only 'void name(void)' style procedure in the protocol is 'close' that
is handled special, but also programming errors like a missing _args or
_ret suffix on the structs in the .x files can create such a situation by
accident. Making the generator aware of this avoids bogus errors from the
generator such as:
Use of uninitialized value in exists at ./rpc/gendispatch.pl line 967.
Also this allows to get rid of the -c option and the special case code for
the 'close' procedure, as the generator handles it now correctly.
Reported by Michal Privoznik
It is common to see the sequence:
virErrorPtr save_err = virSaveLastError();
// do cleanup
virSetError(save_err);
virFreeError(save_err);
on cleanup paths. But for functions where it is desirable to
return the errno that caused failure, this sequence can clobber
that errno. virFreeError was already safe; this makes the other
two functions in the sequence safe as well, assuming all goes
well (on OOM, errno will be clobbered, but then again, save_err
won't reflect the real error that happened, so you are no longer
preserving the real situation - that's life with OOM).
* src/util/virterror.c (virSaveLastError, virSetError): Preserve
errno.
This patch implements cfs_period and cfs_quota's modification.
We can use the command 'virsh schedinfo' to query or modify cfs_period and
cfs_quota.
If you query period or quota from config file, the value 0 means it does not set
in the config file.
If you set period or quota to config file, the value 0 means that delete current
setting from config file.
If you modify period or quota while vm is running, the value 0 means that use
current value.
Add virtkey lib for usage-improvment and keycode translating.
Add 4 internal API for the aim
const char *virKeycodeSetTypeToString(int codeset);
int virKeycodeSetTypeFromString(const char *name);
int virKeycodeValueFromString(virKeycodeSet codeset, const char *keyname);
int virKeycodeValueTranslate(virKeycodeSet from_codeset,
virKeycodeSet to_offset,
int key_value);
* include/libvirt/libvirt.h.in: extend virKeycodeSet enum
* src/Makefile.am: add new virtkeycode module and rule to generate
virkeymaps.h
* src/util/virkeycode.c src/util/virkeycode.h: new module
* src/util/virkeycode-mapgen.py: python generator for virkeymaps.h
out of keymaps.csv
* src/libvirt_private.syms: extend private symbols for new module
* .gitignore: add generated virkeymaps.h
Should keep it as the same as:
http://git.gnome.org/browse/gtk-vnc/commit/src/keymaps.csv
All master keymaps are defined in a CSV file. THis covers
Linux keycodes, OSX keycodes, AT set1, 2 & 3, XT keycodes,
the XT encoding used by the Linux KBD driver, USB keycodes,
Win32 keycodes, the XT encoding used by Xorg on Cygwin,
the XT encoding used by Xorg on Linux with kbd driver.
* src/Makefile.am: added to EXTRA_DIST
* src/util/keymaps.csv: new file
Though we prefer users to have SSH keys setup, virt-manager users still
depend on remote SSH connections to launch a password dialog. This fixes
launch ssh-askpass
Fix suggested by danpb
DMI table is Intel & Intel-compatible specific. Therefore other
architectures miss dmidecode command. So we always fail in searching
for that command on non-Intel architectures.
If a key purpose or usage field is marked as non-critical in the
certificate, then a data mismatch is not (ordinarily) a cause for
rejecting the connection
* src/rpc/virnettlscontext.c: Honour key usage/purpose criticality
If key usage or purpose data is not present in the cert, the
RFC recommends that access be allowed. Also fix checking of
key usage to include requirements for client/server certs,
and fix key purpose checking to treat data as a list of bits
* src/libxl/libxl_driver.c: New callback for libxl_driver,
new function libxlDomainUndefineFlags, and changes libxlDomainUndefine
as a wrapper of libxlDomainUndefineFlags.
This introduces a new API virDomainUndefineFlags to control the
domain undefine process, as the existing API virDomainUndefine
doesn't support flags.
Currently only flag VIR_DOMAIN_UNDEFINE_MANAGED_SAVE is supported.
If the domain has a managed save image, including
VIR_DOMAIN_UNDEFINE_MANAGED_SAVE in @flags will also remove that
file, and omitting the flag will cause undefine process to fail.
This patch also changes the behavior of virDomainUndefine, if the
domain has a managed save image, the undefine will be refused.
Gnutls requires that certificates have basic constraints present
to be used as a CA certificate. OpenSSL doesn't add this data
by default, so add a sanity check to catch this situation. Also
validate that the key usage and key purpose constraints contain
correct data
* src/rpc/virnettlscontext.c: Add sanity checking of certificate
constraints
If the libvirt daemon or libvirt client is configured with bogus
certificates, it is very unhelpful to only find out about this
when a TLS connection is actually attempted. Not least because
the error messages you get back for failures are incredibly
obscure.
This adds some basic sanity checking of certificates at the
time the virNetTLSContext object is created. This is at libvirt
startup, or when creating a virNetClient instance.
This checks that the certificate expiry/start dates are valid
and that the certificate is actually signed by the CA that is
loaded.
* src/rpc/virnettlscontext.c: Add certificate sanity checks
Starting/ending jobs when closing the connection may reset any
error which was reported earlier in p2p migration. We must
save the original error before doing so. This means we can also
just call virConnectClose as normal, instead of virUnrefConnect
* src/qemu/qemu_migration.c: Preserve errors in p2p migration
Since the I/O callback registered against virNetSocket will
hold a reference on the virNetClient, we can't rely on the
virNetClientFree to be able to close the network connection.
The last reference will only go away when the event callback
fires (likely due to EOF from the server).
This is sub-optimal and can potentially cause a leak of the
virNetClient object if the server were to not explicitly
close the socket itself
* src/remote/remote_driver.c: Explicitly close the client
object when disconnecting
* src/rpc/virnetclient.c, src/rpc/virnetclient.h: Add a
virNetClientClose method
When unregistering an I/O callback from a virNetSocket object,
there is still a chance that an event may come in on the callback.
In this case it is possible that the virNetSocket might have been
freed already. Make use of a virFreeCallback when registering
the I/O callbacks and hold a reference for the entire time the
callback is set.
* src/rpc/virnetsocket.c: Register a free function for the
file handle watch
* src/rpc/virnetsocket.h, src/rpc/virnetserverservice.c,
src/rpc/virnetserverclient.c, src/rpc/virnetclient.c: Add
a free function for the socket I/O watches
Remove the need for a virNetSocket object to be protected by
locks from the object using it, by introducing its own native
locking and reference counting
* src/rpc/virnetsocket.c: Add locking & reference counting
If we get an I/O error in the async event callback for an RPC
client, we might not have consumed all pending data off the
wire. This could result in the callback being immediately
invoked again. At which point the same I/O might occur. And
we're invoked again. And again...And again...
Unregistering the async event callback if an error occurs is
a good safety net. The real error will be seen when the next
RPC method is invoked
* src/rpc/virnetclient.c: Unregister event callback on error
The current API build scripts will continue and exit with a zero
status even if they find problems. This has been the cause of many
build problems, or hidden build errors, in the past. Change the
scripts so they always exit with a non-zero status for any problems
they do not understand. Also turn off all debug output by default
so they respect $(AM_V_GEN)
* docs/Makefile.am: Use $(AM_V_GEN) for API/HTML scripts
* docs/apibuild.py, python/generator.py: Exit with non-zero status
if problems are found. Also be silent, not outputting any debug
messages.
* src/Makefile.am: Use $(AM_V_GEN) for ESX generator
* python/Makefile.am: Tweak rule
There were two API in driver.c that were silently masking flags
bits prior to calling out to the drivers, and several others
that were explicitly masking flags bits. This is not
forward-compatible - if we ever have that many flags in the
future, then talking to an old server that masks out the
flags would be indistinguishable from talking to a new server
that can honor the flag. In general, libvirt.c should forward
_all_ flags on to drivers, and only the drivers should reject
unknown flags.
In the case of virDrvSecretGetValue, the solution is to separate
the internal driver callback function to have two parameters
instead of one, with only one parameter affected by the public
API. In the case of virDomainGetXMLDesc, it turns out that
no one was ever mixing VIR_DOMAIN_XML_INTERNAL_STATUS with
the dumpxml path in the first place; that internal flag was
only used in saving and restoring state files, which happened
to be in functions internal to a single file, so there is no
mixing of the internal flag with a public flags argument.
Additionally, virDomainMemoryStats passed a flags argument
over RPC, but not to the driver.
* src/driver.h (VIR_DOMAIN_XML_FLAGS_MASK)
(VIR_SECRET_GET_VALUE_FLAGS_MASK): Delete.
(virDrvSecretGetValue): Separate out internal flags.
(virDrvDomainMemoryStats): Provide missing flags argument.
* src/driver.c (verify): Drop unused check.
* src/conf/domain_conf.h (virDomainObjParseFile): Delete
declaration.
(virDomainXMLInternalFlags): Move...
* src/conf/domain_conf.c: ...here. Delete redundant include.
(virDomainObjParseFile): Make static.
* src/libvirt.c (virDomainGetXMLDesc, virSecretGetValue): Update
clients.
(virDomainMemoryPeek, virInterfaceGetXMLDesc)
(virDomainMemoryStats, virDomainBlockPeek, virNetworkGetXMLDesc)
(virStoragePoolGetXMLDesc, virStorageVolGetXMLDesc)
(virNodeNumOfDevices, virNodeListDevices, virNWFilterGetXMLDesc):
Don't mask unknown flags.
* src/interface/netcf_driver.c (interfaceGetXMLDesc): Reject
unknown flags.
* src/secret/secret_driver.c (secretGetValue): Update clients.
* src/remote/remote_driver.c (remoteSecretGetValue)
(remoteDomainMemoryStats): Likewise.
* src/qemu/qemu_process.c (qemuProcessGetVolumeQcowPassphrase):
Likewise.
* src/qemu/qemu_driver.c (qemudDomainMemoryStats): Likewise.
* daemon/remote.c (remoteDispatchDomainMemoryStats): Likewise.
When libvirtd restarts it will attempt to reconnect to existing
LXC containers. If it loads a XML state file for the container
the container will appear running. If we fail to read the PID
file, or fail to connect to the LXC monitor, we should be killing
off the guest, but if the VMs cgroup does not exist any more,
cleanup will get skipped. Reading the PID file is also pointless
since the PID is in the XML statefile
In lxcReconnectVM we do not need to read the PID file. If part
of the reconnect process fails we need to run the VM terminate
code as a safety net.
In lxcVMTerminate, if we can't obtain the VM cgroup, we know
the process has died, but we must still run lxcVMCleanup to
clear out the virDomainObjPtr live state
* src/lxc/lxc_driver.c: Fix cleanup of dead VMs on restart
These typos are introduced by file renaming in commit b17b4afaf.
src/remote/qemu_protocol.x \
src/remote/remote_protocol.x \
src/rpc/gendispatch.pl:
s/remote_generator/gendispatch/
src/rpc/genprotocol.pl:
s/remote\/remote_protocol/remote_protocol/
The regression is introduced by Commit da1eba6b, the new
codes with this commit doesn't reset "ret" to "-1" when
it fails on parsing the device XML (live device attachment)
This patch changes the codes to reset the "ret" and "-1",
and also changes the codes so that it don't modify "ret"
for condition checking.
How to reproduce:
% cat test.xml
<disk type='oops' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/test.img'/>
<target dev='vda' bus='virtio'/>
</disk>
% virsh attach-device $domain test.xml
Device attached successfully
The device attachment failed actually with error "unknown disk type 'oops'",
however, it reports success.
As long as we guarantee RPC struct layout stability, we might as
well also guarantee RPC enum value constancy.
* src/Makefile.am (r1, r2, PDWTAGS): Adjust rule to pick up named
and anonymous enums.
* src/remote_protocol-structs: Add enum values.
* src/qemu_protocol-structs: Likewise.
* src/virnetprotocol-structs: Likewise.
Enforce the recent flags cleanups - we want to use 'unsigned int flags'
in any of our APIs (except where backwards compatibility is important,
in the public migration APIs), and that all flags are checked for
validity (except when there are stub functions that completely
ignore the flags argument).
There are a few minor tweaks done here to avoid false positives:
signed arguments passed to open() are renamed oflags, and flags
arguments that are legitimately ignored are renamed flags_unused.
* cfg.mk (sc_flags_usage): New rule.
(exclude_file_name_regexp--sc_flags_usage): And a few exemptions.
(sc_flags_debug): Tweak wording.
* src/util/iohelper.c (runIO, main): Rename variable.
* src/util/util.c (virSetInherit): Likewise.
* src/fdstream.h (virFDStreamOpenFile, virFDStreamCreateFile):
Likewise.
* src/fdstream.c (virFDStreamOpenFileInternal)
(virFDStreamOpenFile, virFDStreamCreateFile): Likewise.
* src/util/command.c (virExecWithHook) [WIN32]: Likewise.
* src/util/util.c (virFileOpenAs, virDirCreate) [WIN32]: Likewise.
* src/locking/lock_manager.c (virLockManagerPluginNew)
[!HAVE_DLFCN_H]: Likewise.
* src/locking/lock_driver_nop.c (virLockManagerNopNew)
(virLockManagerNopAddResource, virLockManagerNopAcquire)
(virLockManagerNopRelease, virLockManagerNopInquire): Likewise.
Silently ignored flags get in the way of new features that
use those flags.
Regarding ESX migration flags - right now, ESX silently enforces
VIR_MIGRATE_PERSIST_DEST, VIR_MIGRATE_UNDEFINE_SOURCE, and
VIR_MIGRATE_LIVE, even if those flags were not supplied; it ignored
other flags. This patch does not change the implied bits (it permits
but does not require them), but enforces only the supported bits.
If further cleanup is needed to be more particular about migration
flags, that should be a separate patch.
* src/esx/esx_device_monitor.c (esxDeviceOpen): Reject unknown
flags.
* src/esx/esx_driver.c (esxOpen, esxDomainReboot)
(esxDomainXMLFromNative, esxDomainXMLToNative)
(esxDomainMigratePrepare, esxDomainMigratePerform)
(esxDomainMigrateFinish): Likewise.
* src/esx/esx_interface_driver.c (esxInterfaceOpen): Likewise.
* src/esx/esx_network_driver.c (esxNetworkOpen): Likewise.
* src/esx/esx_nwfilter_driver.c (esxNWFilterOpen): Likewise.
* src/esx/esx_secret_driver.c (esxSecretOpen): Likewise.
* src/esx/esx_storage_driver.c (esxStorageOpen): Likewise.
Commit 461e0f1a broke migration, because there was a code path
that tried to enable an internal flag while still going through
the public function. Split the internal flag into a separate
callback, and validate that flags do not overlap.
* src/conf/domain_conf.c (virDomainDefFormat): Split...
(virDomainDefFormatInternal): ...to separate the flag check.
(virDomainObjFormat): Adjust caller.
Commit f548480b broke migration v3 on qemu, because the driver
passed flags on through to qemu_migration even though
qemu_migration wasn't using those flags.
* src/qemu/qemu_migration.h (QEMU_MIGRATION_FLAGS): New define.
* src/qemu/qemu_driver.c: Simplify all migration callbacks.
* src/qemu/qemu_migration.c (qemuMigrationConfirm): Fix regression.
The previous patches only cleaned up ATTRIBUTE_UNUSED flags cases;
auditing the drivers found other places where flags was being used
but not validated. In particular, domainGetXMLDesc had issues with
clients accepting a different set of flags than the common
virDomainDefFormat helper function.
* src/conf/domain_conf.c (virDomainDefFormat): Add common flag check.
* src/uml/uml_driver.c (umlDomainAttachDeviceFlags)
(umlDomainDetachDeviceFlags): Reject unknown
flags.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc)
(vboxDomainAttachDeviceFlags)
(vboxDomainDetachDeviceFlags): Likewise.
* src/qemu/qemu_driver.c (qemudDomainMemoryPeek): Likewise.
(qemuDomainGetXMLDesc): Document common flag handling.
* src/libxl/libxl_driver.c (libxlDomainGetXMLDesc): Likewise.
* src/lxc/lxc_driver.c (lxcDomainGetXMLDesc): Likewise.
* src/openvz/openvz_driver.c (openvzDomainGetXMLDesc): Likewise.
* src/phyp/phyp_driver.c (phypDomainGetXMLDesc): Likewise.
* src/test/test_driver.c (testDomainGetXMLDesc): Likewise.
* src/vmware/vmware_driver.c (vmwareDomainGetXMLDesc): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainGetXMLDesc): Likewise.
If the server succesfully validates the client cert, it will send
back a single byte, under TLS. If it fails, it will close the
connection. In this case, we were just reporting the standard
I/O error. The original RPC code had a special case hack for the
GNUTLS_E_UNEXPECTED_PACKET_LENGTH error code to make us report
a more useful error message
* src/rpc/virnetclient.c: Return ENOMSG if we get
GNUTLS_E_UNEXPECTED_PACKET_LENGTH
* src/rpc/virnettlscontext.c: Report cert failure if we
see ENOMSG
Many volume operations will fail if the volume in question is being
allocated. These operations were returning VIR_ERR_INTERNAL_ERROR
when they should be returning VIR_ERR_OPERATION_INVALID.
This patch extends qemudDomainSetVcpusFlags() function to support
VIR_DOMAIN_AFFECT_CURRENT flag.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
This patch extends virDomainSetVcpusFlags API to support
VIR_DOMAIN_AFFECT_CURRENT flag.
Now because most APIs accept VIR_DOMAIN_AFFECT_CURRENT flags,
virDomainSetVcpusFlags API should also do.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Rather than trying to clean up the ssh child ourselves, and risk
subtle differences from the socket creation error path, we can
just use the new APIs.
* src/rpc/virnetsocket.c (virNetSocketFree): Use new function.
By requesting the pid in virCommandRunAsync, fdstream was claiming
that it would manually wait for the process. But on the failure
path, the child process was being leaked.
* src/fdstream.c (virFDStreamOpenFileInternal): Auto-reap child.
When using virCommandRunAsync and saving the pid for later, it
is useful to be able to reap that pid in the same way that it
would have been auto-reaped by virCommand if we had passed
NULL for the pid argument in the first place.
* src/util/command.c (virPidWait, virPidAbort): New functions,
created from...
(virCommandWait, virCommandAbort): ...bodies of these.
(includes): Drop duplicate <stdlib.h>. Ensure that our pid_t
assumptions hold.
(virCommandRunAsync): Improve documentation.
* src/util/command.h (virPidWait, virPidAbort): New prototypes.
* src/libvirt_private.syms: Export them.
* docs/internals/command.html.in: Document them.
In the Ubuntu development release we recently got a new udev that
moves /var/run to /run, /var/lock to /run/lock and /dev/shm to /run/shm.
This change in udev requires updating the apparmor security driver in
libvirt[1].
Attached is a patch that:
* adjusts src/security/virt-aa-helper.c to allow both
LOCALSTATEDIR/run/libvirt/**/%s.pid and /run/libvirt/**/%s.pid. While
the profile is not as precise, LOCALSTATEDIR/run/ is typically a symlink
to /run/ anyway, so there is no additional access (remember that
apparmor resolves symlinks, which is why this is still required even
if /var/run points to /run).
* adjusts example/apparmor/libvirt-qemu paths for /dev/shm
[1]https://launchpad.net/bugs/810270
--
Jamie Strandboge | http://www.canonical.com
Similar to the recent qemu_protocol-structs addition.
* src/virnetprotocol-structs: New file.
* src/Makefile.am (%_protocol-structs): Factor body...
(PDWTAGS): ...into new helper macro.
(virnetprotocol-structs): New rule.
(PROTOCOL_STRUCTS): Add virnetprotocol-structs.
Getting metadata on storage allocates a memory (path) which need to
be freed after use otherwise it gets leaked. This means after use of
virStorageFileGetMetadataFromFD or virStorageFileGetMetadata one
must call virStorageFileFreeMetadata to free it. This function frees
structure internals and structure itself.
When qemuMonitorCloseFileHandle is called in error path, we need to
preserve the original error since a possible further error when running
closefd monitor command is not very useful to users.
When creating new qemu process we saved domain status XML only after the
process was fully setup and running. In case libvirtd was killed before
the whole process finished, once libvirtd started again it didn't know
anything about the new process and we end up with an orphaned qemu
process. Let's save the domain status XML as soon as we know the PID so
that libvirtd can kill the process on restart.
The compiler might optimize based on our declaration that something
is unused. Putting that declaration in the header risks getting
out of sync with the actual implementation, so it belongs better
only in the .c files. We were mostly compliant, and a new syntax
check will help us in the future.
* cfg.mk (sc_avoid_attribute_unused_in_header): New syntax check.
* src/nodeinfo.h (nodeGetCPUStats, nodeGetMemoryStats): Delete
attribute already present in .c file.
* src/qemu/qemu_domain.h (qemuDomainEventFlush): Likewise.
* src/util/virterror_internal.h (virReportErrorHelper): Parameters
are actually used by .c file.
* src/xenxs/xen_sxpr.h (xenFormatSxprDisk): Adjust prototype.
* src/xenxs/xen_sxpr.c (xenFormatSxprDisk): Delete unused argument.
(xenFormatSxpr): Adjust caller.
* src/xen/xend_internal.c (xenDaemonAttachDeviceFlags)
(xenDaemonUpdateDeviceFlags): Likewise.
Suggested by Daniel Veillard.
For static functions not used as callbacks, there's no need to
keep an unused parameter.
* src/conf/domain_conf.c (virDomainChrDefParseTargetXML)
(virDomainTimerDefParseXML, virDomainHostdevSubsysUsbDefParseXML)
(virDomainVcpuPinDefParseXML): Drop unused parameter.
(virDomainChrDefParseXML, virDomainDefParseXML)
(virDomainHostdevDefParseXML): Update callers.
(virDomainNetDefParseXML): Mark flags used.
In 2f4d2496a8 I didn't notice that one
part of virFileOpenAs doesn't actually call to virFileOpenAsNoFork but
rather includes a copy of the code from there.
No need to repeat common code.
* bootstrap.conf (gnulib_modules): Import calloc-posix.
* src/util/bridge.c (brInit): Use virSetCloseExec.
(brSetInterfaceUp): Adjust flags name.
* src/uml/uml_driver.c (umlSetCloseExec): Delete.
(umlStartVMDaemon): Use util version instead.
'unsigned a' and 'unsigned int a' are synonyms, but we generally
always spell out the 'int' in that case. Fixing this will avoid
a false positive in the next syntax-check commit.
* src/conf/node_device_conf.h (pci_config_address)
(_virNodeDevCapsDef): Prefer 'unsigned int' over 'unsigned'.
* src/xenapi/xenapi_driver.c (xenapiOpen, xenapiDomainReboot):
Reject unknown flags.
(xenapiDomainGetXMLDesc): Likewise, and pass known flags through
to XML generation.
* src/lxc/lxc_driver.c (lxcOpen, lxcDomainSetMemoryParameters)
(lxcDomainGetMemoryParameters): Reject unknown flags.
* src/lxc/lxc_container.c (lxcContainerStart): Rename flags to
cflags to reflect that it is not tied to libvirt.
Like commit 1740c381, but for libvirt-qemu.
* src/remote/qemu_protocol.x (qemu_monitor_command_args): Adjust
type to match API.
* src/qemu_protocol-structs: Update accordingly.
Continuation of commit 313ac7fd, and enforce things with a syntax
check.
Technically, virNetServerClientCalculateHandleMode is not printing
a mode_t, but rather a collection of VIR_EVENT_HANDLE_* bits;
however, these bits are < 8, so there is no different in the
output, and that was the easiest way to silence the new syntax check.
* cfg.mk (sc_flags_debug): New syntax check.
(exclude_file_name_regexp--sc_flags_debug): Add exemptions.
* src/fdstream.c (virFDStreamOpenFileInternal): Print flags in
hex, mode_t in octal.
* src/libvirt-qemu.c (virDomainQemuMonitorCommand)
(virDomainQemuAttach): Likewise.
* src/locking/lock_driver_nop.c (virLockManagerNopInit): Likewise.
* src/locking/lock_driver_sanlock.c (virLockManagerSanlockInit):
Likewise.
* src/locking/lock_manager.c: Likewise.
* src/qemu/qemu_migration.c: Likewise.
* src/qemu/qemu_monitor.c: Likewise.
* src/rpc/virnetserverclient.c
(virNetServerClientCalculateHandleMode): Print mode with %o.
I got bit in a debugging session on an uninstalled libvirtd; the
code tried to call out to the installed $LIBEXECDIR/libvirt_iohelper
instead of my just-built version. So I set a breakpoint and altered
the binary name to be "./src/libvirt_iohelper", and it still failed
because I don't have "." on my PATH.
According to POSIX, execvp only searches PATH if the name does
not contain a slash. Since we are trying to mimic that behavior,
an anchored name should be relative to the current working dir.
This tightens existing behavior, but most callers already pass
an absolute name or a name with no slashes, so it probably won't
be noticeable.
* src/util/util.c (virFindFileInPath): Anchored relative names do
not invoke a PATH search.
When replacing the default SEGV/ABORT/BUS signal handlers you
can't rely on the process being terminated after your custom
handler runs. It is neccessary to manually restore the default
handler and then re-raise the signal
* src/rpc/virnetserver.c: Restore default handler and raise
signal
When monitor is entered with qemuDomainObjEnterMonitorWithDriver, the
correct method for leaving and unlocking the monitor is
qemuDomainObjExitMonitorWithDriver.
Most of the code in these two functions is supposed to be identical but
currently it isn't (which is natural since the code is duplicated).
Let's move common parts of these functions into qemuMigrationPrepareAny.
This also fixes qemuMigrationPrepareTunnel which didn't store received
lockState in the domain object.
Asynchronous jobs may take long time to finish and may consist of
several phases which we need to now about to help with recovery/rollback
after libvirtd restarts.
Query commands are safe to be called during long running jobs (such as
migration). This patch makes them all work without the need to
special-case every single one of them.
The patch introduces new job.asyncCond condition and associated
job.asyncJob which are dedicated to asynchronous (from qemu monitor
point of view) jobs that can take arbitrarily long time to finish while
qemu monitor is still usable for other commands.
The existing job.active (and job.cond condition) is used all other
synchronous jobs (including the commands run during async job).
Locking schema is changed to use these two conditions. While asyncJob is
active, only allowed set of synchronous jobs is allowed (the set can be
different according to a particular asyncJob) so any method that
communicates to qemu monitor needs to check if it is allowed to be
executed during current asyncJob (if any). Once the check passes, the
method needs to normally acquire job.cond to ensure no other command is
running. Since domain object lock is released during that time, asyncJob
could have been started in the meantime so the method needs to recheck
the first condition. Then, normal jobs set job.active and asynchronous
jobs set job.asyncJob and optionally change the list of allowed job
groups.
Since asynchronous jobs only set job.asyncJob, other allowed commands
can still be run when domain object is unlocked (when communicating to
remote libvirtd or sleeping). To protect its own internal synchronous
commands, the asynchronous job needs to start a special nested job
before entering qemu monitor. The nested job doesn't check asyncJob, it
only acquires job.cond and sets job.active to block other jobs.
EnterMonitor and ExitMonitor methods are very similar to their
*WithDriver variants; consolidate them into EnterMonitorInternal and
ExitMonitorInternal to avoid (mainly future) code duplication.
The UML inotify handler would kill off guests when certain
conditions arise, but it forgot to remove transient guests
from the list of domains
* src/uml/uml_driver.c: Cleanup transient guests
Since a host can run several different virtualization types at
the same time, audit messages should allow domains to be identified.
Add a 'virt={qemu,kvm,uml,lxc,...}' key to domain audit messages
* src/conf/domain_audit.c: Identify virt type of guest
When passing through filesystems from the host to a guest, the
host filesystem passed must be audited
* src/conf/domain_audit.{c,h}: Add virDomainAuditFS
The LXC and UML drivers can both make use of auditing. Move
the qemu_audit.{c,h} files to src/conf/domain_audit.{c,h}
* src/conf/domain_audit.c: Rename from src/qemu/qemu_audit.c
* src/conf/domain_audit.h: Rename from src/qemu/qemu_audit.h
* src/Makefile.am: Remove qemu_audit.{c,h}, add domain_audit.{c,h}
* src/qemu/qemu_audit.h, src/qemu/qemu_cgroup.c,
src/qemu/qemu_command.c, src/qemu/qemu_driver.c,
src/qemu/qemu_hotplug.c, src/qemu/qemu_migration.c,
src/qemu/qemu_process.c: Update for changed audit API names
Given a PID, the QEMU driver reads /proc/$PID/cmdline and
/proc/$PID/environ to get the configuration. This is fed
into the ARGV->XML convertor to build an XML configuration
for the process.
/proc/$PID/exe is resolved to identify the full command
binary path
After checking for name/uuid uniqueness, an attempt is
made to connect to the monitor socket. If successful
then 'info status' and 'info kvm' are issued to determine
whether the CPUs are running and if KVM is enabled.
* src/qemu/qemu_driver.c: Implement virDomainQemuAttach
* src/qemu/qemu_process.h, src/qemu/qemu_process.c: Add
qemuProcessAttach to connect to the monitor of an
existing QEMU process
When attaching to an external QEMU process, it is neccessary
to check if the process is using KVM or not. This can be done
using a monitor command
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
API for checking if KVM is enabled
To enable attaching to externally launched QEMU, we need
to be able to reverse engineer a guest XML config based
on the argv for a PID in /proc
* src/qemu/qemu_command.c, src/qemu/qemu_command.h: Add
qemuParseCommandLinePid which extracts QEMU config from
argv in /proc, given a PID number
When converting QEMU argv into a virDomainDefPtr, also extract
the pidfile, monitor character device config and the monitor
mode.
* src/qemu/qemu_command.c, src/qemu/qemu_command.h: Extract
pidfile & monitor config from QEMU argv
* src/qemu/qemu_driver.c, tests/qemuargv2xmltest.c: Add extra
params when calling qemuParseCommandLineString
Avoid re-formatting the pidfile path everytime we need it. Create
it once when starting the guest, and preserve it until the guest
is shutdown.
* src/libvirt_private.syms, src/util/util.c,
src/util/util.h: Add virFileReadPidPath
* src/qemu/qemu_domain.h: Add pidfile field
* src/qemu/qemu_process.c: Store pidfile path in qemuDomainObjPrivate
This tweaks the RPC generator to cope with some naming
conventions used for the QEMU specific APIs
* daemon/remote.c: Server side dispatcher
* src/remote/remote_driver.c: Client side dispatcher
* src/remote/qemu_protocol.x: Wire protocol definition
* src/rpc/gendispatch.pl: Use '$structprefix' in method
names, fix QEMU flags and fix dispatcher method names
Introduce a new API in libvirt-qemu.so
virDomainPtr virDomainQemuAttach(virConnectPtr domain,
unsigned long long pid,
unsigned int flags);
This allows libvirtd to attach to an existing, externally
launched QEMU process. This is useful for QEMU developers who
prefer to launch QEMU themselves for debugging/devel reasons,
but still want the benefit of libvirt based tools like
virt-top, virt-viewer, etc
* include/libvirt/libvirt-qemu.h: Define virDomainQemuAttach
* src/driver.h, src/libvirt-qemu.c, src/libvirt_qemu.syms:
Driver glue for virDomainQemuAttach
Set StrictHostKeyChecking=no to auto-accept new ssh host keys if the
no_verify extra parameter was specified. This won't disable host key
checking for already known hosts. Includes a test and documentation.
Since we are going to add some libvirt-qemu.so entry points in
0.9.4, we might as well start checking for RPC stability, just
as for libvirt.so.
* src/Makefile.am (PROTOCOL_STRUCTS): New variable.
(remote_protocol-structs): Rename...
(%_protocol-structs): ...and make more generic.
* src/qemu_protocol-structs: New file.
log2() is heavy when ffs() can do the same thing. But ffs()
requires gnulib support for mingw.
This patch solves this linker error on Fedora 14.
/usr/bin/ld: libvirt_lxc-domain_conf.o: undefined reference to symbol 'log2@@GLIBC_2.2.5'
/usr/bin/ld: note: 'log2@@GLIBC_2.2.5' is defined in DSO /lib64/libm.so.6 so try adding it to the linker command line
/lib64/libm.so.6: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
* .gnulib: Update to latest, for ffs.
* bootstrap.conf (gnulib_modules): Import ffs.
* src/conf/domain_conf.c (virDomainDefParseXML): Use ffs instead
of log2.
Reported by Dave Allan.
The drivers were accepting domain configs without checking if those
were actually meant for them. For example the LXC driver happily
accepts configs with type QEMU.
Add a check for the expected domain types to the virDomainDefParse*
functions.
Detected in valgrind run:
==9184== 1 bytes in 1 blocks are definitely lost in loss record 1 of 19
==9184== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==9184== by 0x3073715F78: xdr_array (xdr_array.c:97)
==9184== by 0x4CF97C9: xdr_remote_domain_get_security_label_ret (remote_protocol.c:1696)
==9184== by 0x4D08741: virNetMessageDecodePayload (virnetmessage.c:286)
==9184== by 0x4D00F78: virNetClientProgramCall (virnetclientprogram.c:318)
==9184== by 0x4CE3887: call (remote_driver.c:3933)
==9184== by 0x4CF71C6: remoteDomainGetSecurityLabel (remote_driver.c:1580)
==9184== by 0x4CCA480: virDomainGetSecurityLabel (libvirt.c:7340)
==9184== by 0x41993A: cmdDominfo (virsh.c:2414)
==9184== by 0x411E92: vshCommandRun (virsh.c:12730)
==9184== by 0x4211ED: main (virsh.c:14076)
==9184==
==9184== 2 bytes in 1 blocks are definitely lost in loss record 2 of 19
==9184== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==9184== by 0x3073715F78: xdr_array (xdr_array.c:97)
==9184== by 0x4CF974F: xdr_remote_node_get_security_model_ret (remote_protocol.c:1713)
==9184== by 0x4D08741: virNetMessageDecodePayload (virnetmessage.c:286)
==9184== by 0x4D00F78: virNetClientProgramCall (virnetclientprogram.c:318)
==9184== by 0x4CE3887: call (remote_driver.c:3933)
==9184== by 0x4CF6F96: remoteNodeGetSecurityModel (remote_driver.c:1648)
==9184== by 0x4CBF799: virNodeGetSecurityModel (libvirt.c:7382)
==9184== by 0x4197D7: cmdDominfo (virsh.c:2394)
==9184== by 0x411E92: vshCommandRun (virsh.c:12730)
==9184== by 0x4211ED: main (virsh.c:14076)
==9184==
==9184== 8 bytes in 1 blocks are definitely lost in loss record 3 of 19
==9184== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==9184== by 0x3073715F78: xdr_array (xdr_array.c:97)
==9184== by 0x4CF9729: xdr_remote_node_get_security_model_ret (remote_protocol.c:1710)
==9184== by 0x4D08741: virNetMessageDecodePayload (virnetmessage.c:286)
==9184== by 0x4D00F78: virNetClientProgramCall (virnetclientprogram.c:318)
==9184== by 0x4CE3887: call (remote_driver.c:3933)
==9184== by 0x4CF6F96: remoteNodeGetSecurityModel (remote_driver.c:1648)
==9184== by 0x4CBF799: virNodeGetSecurityModel (libvirt.c:7382)
==9184== by 0x4197D7: cmdDominfo (virsh.c:2394)
==9184== by 0x411E92: vshCommandRun (virsh.c:12730)
==9184== by 0x4211ED: main (virsh.c:14076)
==9184==
==9184== LEAK SUMMARY:
==9184== definitely lost: 11 bytes in 3 blocks
* src/remote/remote_driver.c: Avoid leak on remoteDomainGetSecurityLabel
and remoteNodeGetSecurityModel.
Kernel cmdline args can be passed to xen pv domains even when a
bootloader is specified. The current config-to-sxpr mapping
ignores cmdline when bootloader is present.
Since the xend sub-driver is used with many xen toolstack versions,
this patch takes conservative approach of adding an else block to
existing !def->os.bootloader, and only appends sxpr if def->os.cmdline
is non-NULL.
V2: Fix existing testcase broken by this patch and add new testcases
If virDomainSaveConfig() failed, we will return NULL to source,
and the vm is still available to restart during confirm() step in
v3 protocol. So we should kill it off in qemuMigrationFinish().
In v2 protocol, we should not set vm to NULL, because we hold
a reference of vm and should unrefernce it.
This patch creates new <bios> element which, at this time has only the
attribute useserial='yes|no'. This attribute allow users to use
Serial Graphics Adapter and see BIOS messages from the very first moment
domain boots up. Therefore, users can choose boot medium, set PXE, etc.
The dispatch for the CLOSE RPC call was invoking the method
virNetServerClientClose(). This caused the client connection
to be immediately terminated. This meant the reply to the
final RPC message was never sent. Prior to the RPC rewrite
we merely flagged the connection for closing, and actually
closed it when the next RPC call dispatch had completed.
* daemon/remote.c: Flag connection for a delayed close
* daemon/stream.c: Update to use new API for closing
failed connection
* src/rpc/virnetserverclient.c, src/rpc/virnetserverclient.h:
Add support for a delayed connection close. Rename the
virNetServerClientMarkClose method to virNetServerClientImmediateClose
to clarify its semantics
When closing a remote connection we issue a (fairly pointless)
'CLOSE' RPC call to the daemon. If this fails we skip all the
cleanup of private data, but the virConnectPtr object still
gets released as normal. This causes a memory leak. Since the
CLOSE RPC call is pretty pointless, just carry on freeing the
remote driver if it fails.
* src/remote/remote_driver.c: Ignore failure to issue CLOSE
RPC call
When sending back the final OK or ERROR message on completion
of a stream, we were not decrementing the 'nrequests' tracker
on the client. With the default requests limit of '5', this
meant once a client had created 5 streams, they are unable to
process any further RPC calls. There was also a bug when
handling an error from decoding a message length header, which
meant a client connection would not immediately be closed.
* src/rpc/virnetserverclient.c: Fix release of request after
stream completion & mark client for close on error
In one exit path we forgot to free the virNetMessage object causing
a large memory leak for streams which send a lot of data. Some other
paths were calling VIR_FREE directly instead of virNetMessageFree
although this was (currently) harmless.
* src/rpc/virnetclientstream.c: Fix leak of msg object
* src/rpc/virnetclientprogram.c: Call virNetMessageFree instead
of VIR_FREE
The virNetTLSContextNew was being passed key/cert parameters in
the wrong order. This wasn't immediately visible because if
virNetTLSContextNewPath was used, a second bug reversed the order
of those parameters again.
Only if the paths were manually specified in /etc/libvirt/libvirtd.conf
did the bug appear
* src/rpc/virnettlscontext.c: Fix order of params passed to
virNetTLSContextNew
This option accepts 3 values:
-keep, to keep current client connected (Spice+VNC)
-disconnect, to disconnect client (Spice)
-fail, to fail setting password if there is a client connected (Spice)
When virFileOpenAs is called with VIR_FILE_OPEN_AS_UID flag and uid/gid
different from root/root while libvirtd is running as root, we fork a
new child, change its effective UID/GID to uid/gid and run
virFileOpenAsNoFork. It doesn't make any sense to fchown() the opened
file in this case since we already know that uid/gid can access the file
when open succeeds and one of the following situations may happen:
- the file is already owned by uid/gid and we skip fchown even before
this patch
- the file is owned by uid but not gid because it was created in a
directory with SETGID set, in which case it is desirable not to change
the group
- the file may be owned by a completely different user and/or group
because it was created on a root-squashed or even all-squashed NFS
filesystem, in which case fchown would most likely fail anyway
Add libvirt support for MicroBlaze architecture as a QEMU target. Based on mips/mipsel pattern.
Signed-off-by: John Williams <john.williams@petalogix.com>
No caller was using the flags argument, and this function is internal
only, so we might as well skip it.
* src/util/util.h (safezero): Update signature.
* src/util/util.c (safezero): Update function.
* src/locking/lock_driver_sanlock.c
(virLockManagerSanlockSetupLockspace)
(virLockManagerSanlockCreateLease): Update all callers.
* src/storage/storage_backend.c (createRawFile): Likewise.
Most APIs use 'unsigned int flags'; but a few stragglers were using
a signed value. In particular, the vir*GetXMLDesc APIs were
split-brain, with inconsistent choice of types. Although it is
an API break to use 'int' instead of 'unsigned int', it is ABI
compatible (pre-compiled apps will have no difference in behavior),
and generally apps can be recompiled without any issue (only rare
apps that compiled with extremely high warning levels, or which
pass libvirt API around as typed function pointers, would have to
make any code changes to deal with the change).
The migrate APIs use 'unsigned long flags', which can't be changed,
due to ABI constraints.
This patch intentionally touches only the public API, to prove the
claim that most existing code (including driver callbacks and virsh)
still compiles just fine in spite of the type change.
* include/libvirt/libvirt.h.in (virConnectOpenAuth)
(virDomainCoreDump, virDomainGetXMLDesc, virNetworkGetXMLDesc)
(virNWFilterGetXMLDesc): Use unsigned int for flags.
(virDomainHasCurrentSnapshot): Use consistent spelling.
* src/libvirt.c (virConnectOpenAuth, virDomainCoreDump)
(virDomainGetXMLDesc, virNetworkGetXMLDesc)
(virNWFilterGetXMLDesc, do_open): Update accordingly.
The next patch wants to adjust an end pointer to trim trailing
spaces but without modifying the underlying string, but a more
generally useful ability to trim trailing spaces in place is
also worth providing.
* src/util/util.h (virTrimSpaces, virSkipSpacesBackwards): New
prototypes.
* src/util/util.c (virTrimSpaces, virSkipSpacesBackwards): New
functions.
* src/libvirt_private.syms (util.h): Export new functions.
Inspired by a patch by Minoru Usui.
Most clients of virSkipSpaces don't want to omit backslashes.
Also, open-coding the list of spaces is not as nice as using
c_isspace.
* src/util/util.c (virSkipSpaces): Use c_isspace.
(virSkipSpacesAndBackslash): New function.
* src/util/util.h (virSkipSpacesAndBackslash): New prototype.
* src/xen/xend_internal.c (sexpr_to_xend_topology): Update caller.
* src/libvirt_private.syms (util.h): Export new function.
Move stat and mkdir to virFileMakePathHelper.
Also use the stat result to detect whether the existing path
is a directory and set errno accordingly if it's not.
When no <seclabel> is present in the XML, the virDomainSeclabelDef
struct is left as all zeros. Unfortunately, this means it gets setup
as type=dynamic, with relabel=no, which is an illegal combination.
Change the 'bool relabel' attribute in virDomainSeclabelDef to
the inverse 'bool norelabel' so that the default initialization
is sensible
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/security/security_apparmor.c, src/security/security_selinux.c:
Replace 'relabel' with 'norelabel'
Some callers expected virFileMakePath to set errno, some expected
it to return an errno value. Unify this to return 0 on success and
-1 on error. Set errno to report detailed error information.
Also optimize virFileMakePath if stat fails with an errno different
from ENOENT.
add a new API pciDeviceReAttachInit() in pci.c to initialize state values for nodedev reattach
Initialize three state value of device driver to 1. This is just for a new call to
qemudNodeDeviceReAttach()
Although most functions with flags check to verify no application is
passing in flag bits that are currently undefined, for some reason
this function wasn't.
* Change all flags args from int to unsigned int
* Allow passing flags in virDomainObjParseFile (and propogate those
flags all the way down the call chain). Previously the flags were
hardcoded (to VIR_DOMAIN_XML_INTERNAL_STATUS) several layers down
the chain. Pass that value in at the one place that is currently
calling virDomainObjParseFile.
virFileMakePath returns an errno value on error, that will never
be negative. An virFileMakePath error would have been ignored here,
instead of being reported correctly.
The struct A {} A; construct triggers a linker error on OSX about
duplicate symbols. This also differs from the common struct style.
Switch to common style to fix this.
Reported by Justin Clift.
Add a new attribute to the <seclabel> XML to allow resource
relabelling to be enabled with static label usage.
<seclabel model='selinux' type='static' relabel='yes'>
<label>system_u:system_r:svirt_t:s0:c392,c662</label>
</seclabel>
* docs/schemas/domain.rng: Add relabel attribute
* src/conf/domain_conf.c, src/conf/domain_conf.h: Parse
the 'relabel' attribute
* src/qemu/qemu_process.c: Unconditionally clear out the
'imagelabel' attribute
* src/security/security_apparmor.c: Skip based on 'relabel'
attribute instead of label type
* src/security/security_selinux.c: Skip based on 'relabel'
attribute instead of label type and fill in <imagelabel>
attribute if relabel is enabled.
Normally the dynamic labelling mode will always use a base
label of 'svirt_t' for VMs. Introduce a <baselabel> field
in the <seclabel> XML to allow this base label to be changed
eg
<seclabel type='dynamic' model='selinux'>
<baselabel>system_u:object_r:virt_t:s0</baselabel>
</seclabel>
* docs/schemas/domain.rng: Add <baselabel>
* src/conf/domain_conf.c, src/conf/domain_conf.h: Parsing
of base label
* src/qemu/qemu_process.c: Don't reset 'model' attribute if
a base label is specified
* src/security/security_apparmor.c: Refuse to support base label
* src/security/security_selinux.c: Use 'baselabel' when generating
label, if available
virStorageBackendCreateRaw: createRawFile already reported the
exact error.
Before the fix:
error: Failed to create vol vol-create.img
error: cannot create path '/var/lib/libvirt/images/vol-create.img': Unknown error 18446744073709551597
After the fix:
error: Failed to create vol vol-create.img
error: cannot fill file '/var/lib/libvirt/images/vol-create.img': No space left on device
Coverity detected that we could crash on bogus input. Meanwhile,
strtok_r is rather heavy compared to strchr.
* src/storage/storage_backend_iscsi.c (virStorageBackendIQNFound):
Check for parse failure, and use lighter-weight functions.
Detected by Coverity. qemuDomainEventQueue requires a non-NULL
pointer; most callers silently drop the event if we encountered
and OOM situation trying to create the event.
* src/qemu/qemu_migration.c (qemuMigrationFinish): Check for OOM.
Coverity noted that most clients reacted to failure to hash; but in
a best-effort kill loop, we can ignore failure.
* src/util/cgroup.c (virCgroupKillInternal): Ignore hash failure.
Coverity noted that 4 out of 5 calls to virNetClientStreamRaiseError
checked the return value. This case expects a particular value, so
warn if our expectations went wrong due to some bug elsewhere.
* src/rpc/virnetclient.c (virNetClientCallDispatchStream): Warn on
unexpected scenario.
Coverity warns if the majority of callers check a function for
errors, but a few don't; but in qemu_audit and qemu_domain, the
choice to not check for failures was safe. In qemu_command, the
failure to generate a uuid can only occur on a bad pointer.
* src/qemu/qemu_audit.c (qemuAuditCgroup): Ignore failure to get
cgroup controller.
* src/qemu/qemu_domain.c (qemuDomainObjEnterMonitor)
(qemuDomainObjEnterMonitorWithDriver): Ignore failure to get
timestamp.
* src/qemu/qemu_command.c (qemuParseCommandLine): Check for error.
Detected by Coverity. The leak is on an error path, but I'm not
sure whether that path is likely to be triggered in practice.
* src/rpc/virnetserverservice.c (virNetServerServiceAccept): Plug leak.
Spotted by Coverity. If we don't update tmp each time through
the loop, then if the filter being removed was not the head of
the list, we accidentally lose all filters prior to the one we
wanted to remove.
* src/rpc/virnetserverclient.c (virNetServerClientRemoveFilter):
Don't lose unrelated filters.
Detected by Coverity. Some, but not all, error paths were clean;
but they were repetitive so I refactored them.
* src/util/pci.c (pciGetDevice): Plug leak.
To avoid regressions, we let callers specify whether to require a
minor and micro version. Callers that were parsing uname() output
benefit from defaulting to 0, whereas callers that were parsing
version strings from other sources should not change in behavior.
* src/util/util.c (virParseVersionString): Allow caller to choose
whether to fail if minor or micro is missing.
* src/util/util.h (virParseVersionString): Update signature.
* src/esx/esx_driver.c (esxGetVersion): Update callers.
* src/lxc/lxc_driver.c (lxcVersion): Likewise.
* src/openvz/openvz_conf.c (openvzExtractVersionInfo): Likewise.
* src/uml/uml_driver.c (umlGetVersion): Likewise.
* src/vbox/vbox_MSCOMGlue.c (vboxLookupVersionInRegistry):
Likewise.
* src/vbox/vbox_tmpl.c (vboxExtractVersion): Likewise.
* src/vmware/vmware_conf.c (vmwareExtractVersion): Likewise.
* src/xenapi/xenapi_driver.c (xenapiGetVersion): Likewise.
Reported by Matthias Bolte.
According to the automake manual, CPPFLAGS (aka INCLUDES, as spelled
in automake 1.9.6) should only include -I, -D, and -U directives; more
generic directives like -Wall belong in CFLAGS since they affect more
phases of the build process. Therefore, we should be sticking CFLAGS
additions into a CFLAGS container, not a CPPFLAGS container.
* src/Makefile.am (libvirt_driver_vmware_la_CFLAGS): Use AM_CFLAGS.
(INCLUDES): Move CFLAGS items...
(AM_CFLAGS): ...to their proper location.
* python/Makefile.am (INCLUDES, AM_CFLAGS): Likewise.
* tests/Makefile.am (INCLUDES, AM_CFLAGS): Likewise.
(commandtest_CFLAGS, commandhelper_CFLAGS)
(virnetmessagetest_CFLAGS, virnetsockettest_CFLAGS): Use AM_CFLAGS.
linux 3.0 has no micro version number, and that is causing problems
for virParseVersionString. The patch below should allow for:
major
major.minor
major.minor.micro
If major or minor are not present they just default to zero.
We found this in Ubuntu (https://bugs.launchpad.net/bugs/802977)
Detected by Coverity. No real harm in leaving these, but fixing
them cuts down on the noise for future analysis.
* src/rpc/virnetserver.c (virNetServerAddService): Delete unused
entry.
* src/util/sysinfo.c (virSysinfoRead): Delete dead assignment to
base.
EXTRA_DIST files should unconditionally be part of the tarball,
rather than depending on the presence of sanlock-devel.
Meanwhile, parallel builds could fail if we don't use mkdir -p.
* src/Makefile.am (EXTRA_DIST): Always ship sanlock .aug and
template .conf files.
(%-sanlock.conf): Use MKDIR_P.
Detected by Coverity. Both are instances of bad things happening
if pipe2 fails; the virNetClientNew failure could free garbage,
and virNetSocketNewConnectCommand could close random fds.
Note: POSIX doesn't guarantee the contents of fd[0] and fd[1]
after pipe failure: http://austingroupbugs.net/view.php?id=467
We may need to introduce a virPipe2 wrapper that guarantees
that on pipe failure, the fds are explicitly set to -1, rather
than our current state of assuming the fds are unchanged from
their value prior to the failed pipe call.
* src/rpc/virnetclient.c (virNetClientNew): Initialize variable.
* src/rpc/virnetsocket.c (virNetSocketNewConnectCommand):
Likewise.
The virDomainMigratePrepareTunnel3 impl in the remote driver
was using the procedure number for the virDomainMigratePrepareTunnel
method. This doesn't work out so well, because it makes the server
ignore & drop all stream packets
* src/remote/remote_driver.c: Fix procedure for PrepareTunnel3
We ignore any stream data packets which come in for streams which
are not registered, since these packets are async and do not have
a reply. If we get a stream control packet though we must send back
an actual error, otherwise a (broken) client may hang forever
making it hard to diagnose the client bug.
* src/rpc/virnetserverprogram.c: Send back error for unexpected
stream control messages
If a message packet for a invalid stream is received it is just
free'd. This is not good because it doesn't let the client RPC
request counter decrement. If a stream is shutdown with pending
packets the message also isn't released properly because of an
incorrect header type
* daemon/stream.c: Fix message header type
* src/rpc/virnetserverprogram.c: Send dummy reply instead of
free'ing ignored stream message
The qemudDomainSaveFlag method will call EndJob on the 'vm'
object it is passed in. This can result in the 'vm' object
being free'd if the last reference is removed. Thus no caller
of 'qemudDomainSaveFlag' must *ever* reference 'vm' again
upon return.
Unfortunately qemudDomainSave and qemuDomainManagedSave
both call 'virDomainObjUnlock', which can result in a
crash. This is non-deterministic since it involves a race
with the monitor I/O thread.
Fix this by making qemudDomainSaveFlag responsible for
calling virDomainObjUnlock instead.
* src/qemu/qemu_driver.c: Fix potential use after free
when saving guests
The 'char control[CMSG_SPACE(sizeof(int))];' was not being
wiped, so could potentially contain uninitialized bytes.
While this was harmless in this case, it caused complaints
from valgrind
* src/qemu/qemu_monitor.c: memset 'control' variable
in qemuMonitorIOWriteWithFD
The event handler functions do not free the virJSONValuePtr
object. Every event received from a VM thus caused a memory
leak
* src/qemu/qemu_monitor_json.c: Fix leak of event object
The 'function' field in the PCI address was not correctly
initialized, so it was building the wrong address address
string and so not removing all functions from the in use
list.
* src/qemu/qemu_command.c: Fix initialization of PCI function
When adding a callback to an FD stream, we take an extra reference
on the virStreamPtr instance. We forgot to registered a free function
with the callback, so when the callback was removed, the extra
reference held on virStreamPtr was not released.
* src/fdstream.c: Use a free callback to release reference on
virStreamPtr when removing callback
To save on memory reallocation, virNetMessage instances that
have been transmitted, may be reused for a subsequent incoming
message. We forgot to clear out the old data of the message
fully, which caused later confusion upon read.
* src/rpc/virnetserverclient.c: memset entire message before
reusing it
The virNetServerClient object had a hardcoded limit of 10 requests
per client. Extend constructor to allow it to be passed in as a
configurable variable. Wire this up to the 'max_client_requests'
config parameter in libvirtd
* daemon/libvirtd.c: Pass max_client_requests into services
* src/rpc/virnetserverservice.c, src/rpc/virnetserverservice.h: Pass
nrequests_client_max to clients
* src/rpc/virnetserverclient.c, src/rpc/virnetserverclient.h: Allow
configurable request limit
If we pass VIR_DOMAIN_AFFECT_LIVE | VIR_DOMAIN_AFFECT_CONFIG to
qemuGetSchedulerParametersFlags() or *nparams is less than 1,
we will unlock qemu_driver without locking it. It's very dangerous.
We should lock qemu_driver after calling virCheckFlags().
virDomainVcpuPinDefFree() does not free def->cputune.vcpupin if nvcpupin
is 0, and does not set def->cputune.vcpupin to NULL.
If we set nvcpupin to 0 but do not free vcpupin, vcpupin will not be freed
when vm->def is freed.
Use VIR_FREE() instead of virDomainVcpuPinDefFree() to free the memory
and set def->cputune.vcpupint to NULL.
When the remote client receives end of file on the stream
it never invokes the stream callback. Applications relying
on async event driven I/O will thus never see the EOF
condition on the stream
* src/rpc/virnetclient.c, src/rpc/virnetclientstream.c:
Ensure EOF is dispatched
The client stream object can be used independently of the
virNetClientPtr object, so must have full locking of its
own and not rely on any caller.
* src/remote/remote_driver.c: Remove locking around stream
callback
* src/rpc/virnetclientstream.c: Add locking to all APIs
and callbacks
When a filter steals an RPC message, that message must
not be freed, except by the filter code itself
* src/rpc/virnetserverclient.c: Don't free stolen RPC
messages
Improve log messages issued when encountering a bogus
message length to include the actual length and the
limit violated
* src/rpc/virnetmessage.c: Improve log messages
On stream completion it is neccessary to send back a
message with an empty payload. The message header was
not being filled out correctly, since we were not writing
any payload. Add a method for encoding an empty payload
which updates the message headers correctly.
* src/rpc/virnetmessage.c, src/rpc/virnetmessage.h: Add
a virNetMessageEncodePayloadEmpty method
* src/rpc/virnetserverprogram.c: Write empty payload on
stream completion
The RPC client treats failure to register a socket watch
as non-fatal, since we do not mandate that a libvirt client
application provide an event loop implementation. It is
thus inappropriate to a log a message at VIR_LOG_WARN
* src/rpc/virnetsocket.c: Lower logging level
If a streams error is raised, virNetClientIOEventLoop
returns 0, but an error is set. Check for this and
propagate it if present
* src/rpc/virnetclient.c: Propagate streams error
If a callback being invoked from a stream issues a virStreamAbort
operation, the stream data will be free'd but the callback will
then still try to use this. Delay free'ing of the stream data when
a callback is dispatching
* src/fdstream.c: Delay stream free when callback is active
Although we create a temporary file, it is owned by root:root and have
rights 0600. In case qemu does not run under root, it is unable to write
to that file and thus we transfer 0B sized file.
addnhostsSave and hostsfileSave expect < 0 return value on error from
addnhostsWrite and hostsfileWrite but then pass err instead of -err
to virReportSystemError that expects an errno value.
Also addnhostsWrite returns -ENOMEM and errno, change this to -errno.
addnhostsWrite and hostsfileWrite tried to unlink the tempfile after
renaming it, making both fail on the final step. Remove the unnecessary
unlink calls.
networkSaveDnsmasqHostsfile was added in 8fa9c22142 (Apr 2010).
It has a force flag. If the dnsmasq hostsfile already exists force
needs to be true to overwrite it. networkBuildDnsmasqArgv sets force
to false, networkDefine sets it to true. This results in the
hostsfile being written only in networkDefine in the common case.
If no error occurred networkSaveDnsmasqHostsfile returns true and
networkBuildDnsmasqArgv adds the --dhcp-hostsfile to the dnsmasq
command line.
networkSaveDnsmasqHostsfile was changed in 89ae9849f7 (24 Jun 2011)
to return a new dnsmasqContext instead of reusing one. This change broke
the logic of the force flag as now networkSaveDnsmasqHostsfile returns
NULL on error, but the early return -- if force was not set and the
hostsfile exists -- returns 0. This turned the early return in an error
case and networkBuildDnsmasqArgv didn't add the --dhcp-hostsfile option
anymore if the hostsfile already exists. It did because networkDefine
created the hostsfile already.
Then 9d4e2845d4 fixed the return 0 case in networkSaveDnsmasqHostsfile
but didn't apply the force option correctly to the new addnhosts file.
Now force doesn't control an early return anymore, but influences the
handling of the hostsfile context creation and dnsmasqSave is always
called now. This commit also added test cases that reveal several
problems. First, the tests now calls functions that try to write the
dnsmasq config files to disk. If someone runs this tests as root this
might overwrite actively used dnsmasq config files, this is a no-go. Also
the tests depend on configure --localstatedir, this needs to be fixed as
well, because it makes the tests fail when localstatedir is different
from /var.
This patch does several things to fix this:
1) Move dnsmasqContext creation and saving out of networkBuildDnsmasqArgv
to the caller to separate the command line generation from the config
file writing. This makes the command line generation testable without the
risk of interfering with system files, because the tests just don't call
dnsmasqSave.
2) This refactoring of networkSaveDnsmasqHostsfile makes the force flag
useless as the saving happens somewhere else now. This fixes the wrong
usage of the force flag in combination with then newly added addnhosts
file by removing the force flag.
3) Adapt the wrong test cases to the correct behavior, by adding the
missing --dhcp-hostsfile option. Both affected tests contain DHCP host
elements but missed the necessary --dhcp-hostsfile option.
4) Rename networkSaveDnsmasqHostsfile to networkBuildDnsmasqHostsfile,
because it doesn't save the dnsmasqContext anymore.
5) Move all directory creations in dnsmasq context handling code from
the *New functions to dnsmasqSave to avoid directory creations in system
paths in the test cases.
6) Now that networkBuildDnsmasqArgv doesn't create the dnsmasqContext
anymore the test case can create one with the localstatedir that is
expected by the tests instead of the configure --localstatedir given one.
Detected by gcc -O2, introduced in commit 532ce9c2. If dmidecode
outputs a field unrecognized by the parsers, then the code would
dereference an uninitialized eol variable.
* src/util/sysinfo.c (virSysinfoParseBIOS)
(virSysinfoParseSystem, virSysinfoParseProcessor)
(virSysinfoParseMemory): Avoid uninitialized variable.
Detected by gcc -O2:
remote/remote_driver.c: In function 'doRemoteOpen':
remote/remote_driver.c:2753:26: error: 'sasl' may be used uninitialized in this function [-Werror=uninitialized]
* src/remote/remote_driver.c (remoteAuthSASL): Initialize sasl.
The current sanlock plugin requires a central management
application to manually add <lease> elements to each guest,
to protect resources that are assigned to it (eg writable
disks). This makes the sanlock plugin useless for usage
in more ad hoc deployment environments where there is no
central authority to associate disks with leases.
This patch adds a mode where the sanlock plugin will
automatically create leases for each assigned read-write
disk, using a md5 checksum of the fully qualified disk
path. This can work pretty well if guests are using
stable disk paths for block devices eg /dev/disk/by-path/XXXX
symlinks, or if all hosts have NFS volumes mounted in
a consistent pattern.
The plugin will create one lockspace for managing disks
with filename /var/lib/libvirt/sanlock/__LIBVIRT__DISKS__.
For each VM disks, there will be another file to hold
a lease /var/lib/libvirt/sanlock/5903e5d25e087e60a20fe4566fab41fd
Each VM disk lease is usually 1 MB in size. The script
virt-sanlock-cleanup should be run periodically to remove
unused lease files from the lockspace directory.
To make use of this capability the admin will need to do
several tasks:
- Mount an NFS volume (or other shared filesystem)
on /var/lib/libvirt/sanlock
- Configure 'host_id' in /etc/libvirt/qemu-sanlock.conf
with a unique value for each host with the same NFS
mount
- Toggle the 'auto_disk_leases' parameter in qemu-sanlock.conf
Technically the first step can be skipped, in which case
sanlock will only protect against 2 vms on the same host
using the same disk (or the same VM being started twice
due to error by libvirt).
* src/locking/libvirt_sanlock.aug,
src/locking/sanlock.conf,
src/locking/test_libvirt_sanlock.aug: Add config params
for configuring auto lease setup
* libvirt.spec.in: Add virt-sanlock-cleanup program, man
page
* tools/virt-sanlock-cleanup.in: Script to purge unused
disk resource lease files
Introduce a configuration file with a single parameter
'require_lease_for_disks', which is used to decide whether
it is allowed to start a guest which has read/write disks,
but without any leases.
* libvirt.spec.in: Add sanlock config file and augeas
lens
* src/Makefile.am: Install sanlock config file and
augeas lens
* src/locking/libvirt_sanlock.aug: Augeas master lens
* src/locking/test_libvirt_sanlock.aug: Augeas test file
* src/locking/sanlock.conf: Example sanlock config
* src/locking/lock_driver_sanlock.c: Wire up loading
of configuration file
Allow a 'configFile' parameter to be passed into the lock
drivers to provide configuration. Wire up the QEMU driver
to pass in file names '/etc/libvirt/qemu-$NAME.conf
eg qemu-sanlock.conf
* src/locking/lock_driver.h, src/locking/lock_driver_nop.c,
src/locking/lock_driver_sanlock.c, src/locking/lock_manager.c,
src/locking/lock_manager.h: Add configFile parameter
* src/qemu/qemu_conf.c: Pass in configuration file path to
lock driver plugins
If a domain name is defined for a network, add the --expand-hosts
option to the dnsmasq commandline. This results in the domain being
added to any hostname that is defined in a dns <host> element and
contains no '.' characters (i.e. it is an "unqualified"
hostname). Since PTR records are automatically created for any name
defined in <host>, the result of a PTR request will change from the
unqualified name to the qualified name.
This also has the same effect on any hostnames that dnsmasq reads
from the host's /etc/hosts file.
(In the case of guest hostnames that were learned by dnsmasq via DHCP
requests, they were already getting the domain name added on, even
without --expand-hosts).
The standard remote protocol for libvirtd no longer needs to
include definitions of the generic message header/error structs
or status codes. This is all defined in the generic RPC protocol
* src/remote/remote_protocol.x: Remove all RPC message definitions
* src/remote/remote_protocol.h, src/remote/remote_protocol.c:
Re-generate
* daemon/remote_generate_stubs.pl: Delete obsolete script
This guts the libvirtd daemon, removing all its networking and
RPC handling code. Instead it calls out to the new virServerPtr
APIs for all its RPC & networking work
As a fallout all libvirtd daemon error reporting now takes place
via the normal internal error reporting APIs. There is no need
to call separate error reporting APIs in RPC code, nor should
code use VIR_WARN/VIR_ERROR for reporting fatal problems anymore.
* daemon/qemu_dispatch_*.h, daemon/remote_dispatch_*.h: Remove
old generated dispatcher code
* daemon/qemu_dispatch.h, daemon/remote_dispatch.h: New dispatch
code
* daemon/dispatch.c, daemon/dispatch.h: Remove obsoleted code
* daemon/remote.c, daemon/remote.h: Rewrite for new dispatch
APIs
* daemon/libvirtd.c, daemon/libvirtd.h: Remove all networking
code
* daemon/stream.c, daemon/stream.h: Update for new APIs
* daemon/Makefile.am: Link to libvirt-net-rpc-server.la
This guts the current remote driver, removing all its networking
handling code. Instead it calls out to the new virClientPtr and
virClientProgramPtr APIs for all RPC & networking work.
* src/Makefile.am: Link remote driver with generic RPC code
* src/remote/remote_driver.c: Gut code, replacing with RPC
API calls
* src/rpc/gendispatch.pl: Update for changes in the way
streams are handled
The libvirt sanlock plugin is intentionally leaking a file
descriptor to QEMU. To enable QEMU to use this FD under
SELinux, it must be labelled correctly. We dont want to use
the svirt_image_t for this, since QEMU must not be allowed
to actually use the FD. So instead we label it with svirt_t
using virSecurityManagerSetProcessFDLabel
* src/locking/domain_lock.c, src/locking/domain_lock.h,
src/locking/lock_driver.h, src/locking/lock_driver_nop.c,
src/locking/lock_driver_sanlock.c, src/locking/lock_manager.c,
src/locking/lock_manager.h: Optionally pass an FD back to
the hypervisor for security driver labelling
* src/qemu/qemu_process.c: label the lock manager plugin
FD with the process label
Add a new security driver method for labelling an FD with
the process label, rather than the image label
* src/libvirt_private.syms, src/security/security_apparmor.c,
src/security/security_dac.c, src/security/security_driver.h,
src/security/security_manager.c, src/security/security_manager.h,
src/security/security_selinux.c, src/security/security_stack.c:
Add virSecurityManagerSetProcessFDLabel & impl
The virSecurityManagerSetFDLabel method is used to label
file descriptors associated with disk images. There will
shortly be a need to label other file descriptors in a
different way. So the current name is ambiguous. Rename
the method to virSecurityManagerSetImageFDLabel to clarify
its purpose
* src/libvirt_private.syms,
src/qemu/qemu_migration.c, src/qemu/qemu_process.c,
src/security/security_apparmor.c, src/security/security_dac.c,
src/security/security_driver.h, src/security/security_manager.c,
src/security/security_manager.h, src/security/security_selinux.c,
src/security/security_stack.c: s/FDLabel/ImageFDLabel/
This is in response to bugzilla 664629
https://bugzilla.redhat.com/show_bug.cgi?id=664629
The patch below returns an appropriate error message if the chain of
nwfilters is found to contain unresolvable variables and therefore
cannot be instantiated.
Example: The following XMl added to a domain:
<interface type='bridge'>
<mac address='52:54:00:9f:80:45'/>
<source bridge='virbr0'/>
<model type='virtio'/>
<filterref filter='test'/>
</interface>
that references the following filter
<filter name='test' chain='root'>
<filterref filter='clean-traffic'/>
<filterref filter='allow-dhcp-server'/>
</filter>
now displays upon 'virsh start mydomain'
error: Failed to start domain mydomain
error: internal error Cannot instantiate filter due to unresolvable variable: DHCPSERVER
'DHPCSERVER' is contained in allow-dhcp-server.
We already have a public virDomainPinVcpu, which implies that
Pin and Vcpu are treated as separate words. Unreleased commit
e261987c introduced virDomainGetVcpupinInfo as the first public
API that used Vcpupin, although we had prior internal uses of
that spelling. For consistency, change the spelling to be two
words everywhere, regardless of whether pin comes first or last.
* daemon/remote.c: Treat vcpu and pin as separate words.
* include/libvirt/libvirt.h.in: Likewise.
* src/conf/domain_conf.c: Likewise.
* src/conf/domain_conf.h: Likewise.
* src/driver.h: Likewise.
* src/libvirt.c: Likewise.
* src/libvirt_private.syms: Likewise.
* src/libvirt_public.syms: Likewise.
* src/libxl/libxl_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/xen/xend_internal.c: Likewise.
* tools/virsh.c: Likewise.
* src/remote/remote_protocol.x: Likewise.
* src/remote_protocol-structs: Likewise.
Suggested by Matthias Bolte.
Convert networkDnsmasqLeaseFileName to a replaceable function pointer
that allow the testsuite to use a version of that function that is not
depending on configure --localstatedir.
This fixes 5 of 6 test failures, when configure --localstatedir isn't
set to /var.
The build currently fails when trying to create virnetprotocol.c
into $(builddir)/rpc, which doesn't exist. But since the file
is part of the tarball, it should be generated into $(srcdir).
Caught by autobuild.sh.
* src/Makefile.am (VIR_NET_RPC_GENERATED): Generate into srcdir.
This patch implements the code to address the new API (virDomainGetVcpupinInfo)
in the qemu driver.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
This patch introduces a new libvirt API (virDomainGetVcpupinInfo),
as a counterpart to virDomainPinVcpuFlags.
We can use virDomainGetVcpus API to retrieve CPU affinity information,
but can't use this API against inactive domains (at least in case of KVM),
as it lacks a flags parameter.
The usual thing is to add a new virDomainGetVcpusFlags, but that API name
is already occupied by the counterpart to virDomainGetMaxVcpus, which
has a completely different signature.
The virDomainGetVcpupinInfo is the new API to retrieve CPU affinity
information of active and inactive domains. While the usual convention
is to list an array before its length, this API violates that rule
in order to be more like virDomainGetVcpus (where maxinfo was doing
double-duty as the length of two different arrays).
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
It's unlikely that we'll ever want to escape a string as long as
INT_MAX/6, but adding this check can't hurt.
* src/util/buf.c (virBufferEscapeSexpr, virBufferEscapeString):
Check for (unlikely) overflow.
Integer overflow and remote code are never a nice mix.
This has existed since commit 56cd414.
* src/libvirt.c (virDomainGetVcpus): Reject overflow up front.
* src/remote/remote_driver.c (remoteDomainGetVcpus): Avoid overflow
on sending rpc.
* daemon/remote.c (remoteDispatchDomainGetVcpus): Avoid overflow on
receiving rpc.
Done as a separate commit to make backporting the next patch easier.
We are already using "intprops.h", but this makes it explicit.
* .gnulib: Update, for syntax-check fix.
* bootstrap.conf (gnulib_modules): Make intprops use explicit.
* src/locking/domain_lock.c (includes): Drop unused header.
* src/nwfilter/nwfilter_learnipaddr.c (includes): Use "", not <>,
for gnulib.
This commit introduces names definition for the DNS hosts file using
the following syntax:
<dns>
<host ip="192.168.1.1">
<name>alias1</name>
<name>alias2</name>
</host>
</dns>
Some of the improvements and fixes were done by Laine Stump so
I'm putting him into the SOB clause again ;-)
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Laine Stump <laine@laine.org>
The dnsmasq commandline was being built as a part of running
dnsmasq. This patch puts the commandline build into a separate
function (and exports it as a private API) making it possible to build
a dnsmasq commandline without executing it, so that we can write a
test program to verify that the proper commandlines are being created.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
This commit introduces the <dns> element and <txt> record for the
virtual DNS network. The DNS TXT record can be defined using following
syntax in the network XML file:
<dns>
<txt name="example" value="example value" />
</dns>
Also, the Relax-NG scheme has been altered to allow the texts without
spaces only for the name element and some nitpicks about memory
free'ing have been fixed by Laine so therefore I'm adding Laine to the
SOB clause ;-)
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Laine Stump <laine@laine.org>
Commit 12317957ec introduced an incompatible
architectural change for the AppArmor security driver. Specifically,
virSecurityManagerSetAllLabel() is now called much later in
src/qemu/qemu_process.c:qemuProcessStart(). Previously, SetAllLabel() was
called immediately after GenLabel() such that after the dynamic label (profile
name) was generated, SetAllLabel() would be called to create and load the
AppArmor profile into the kernel before qemuProcessHook() was executed. With
12317957ec, qemuProcessHook() is now called
before SetAllLabel(), such that aa_change_profile() ends up being called
before the AppArmor profile is loaded into the kernel (via ProcessLabel() in
qemuProcessHook()).
This patch addresses the change by making GenLabel() load the AppArmor
profile into the kernel after the label (profile name) is generated.
SetAllLabel() is then adjusted to only reload_profile() and append stdin_fn to
the profile when it is specified. This also makes the AppArmor driver work
like its SELinux counterpart with regard to SetAllLabel() and stdin_fn.
Bug-Ubuntu: https://launchpad.net/bugs/801569
When adding virDomainGetVcpusFlags in commit ea3f5c6, I did
enough rebasing that the doc comments in libvirt.c no longer
matched the final chosen enum names in libvirt.h.
And now we've gone ahead and deprecated the names
VIR_DOMAIN_VCPU_{LIVE,CONFIG}.
* src/libvirt.c (virDomainGetVcpusFlags): Fix comment.
Use NUMA's older nodemask_t (fixed-size map) rather than the newer
'struct bitmask' (variable-size) in order to still compile on RHEL 5,
with its numactl-devel-0.9.8.
* src/qemu/qemu_process.c [HAVE_NUMA]: Prefer back-compat mode.
(qemuProcessInitNumaMemoryPolicy): Use older nodemask_t.
To ensure virnetprotocol.[ch] are generated before any other
files, add them to BUILT_SOURCES and MAINTAINERCLEANFILES.
At the same time, move ESX_DRIVER_GENERATED out of DISTCLEAN
and into MAINTAINERCLEANFILES, since they are included in
EXTRA_DIST
* src/Makefile.am: Add virnetprotocol.[ch] to BUILT_SOURCES
The Makefile.am rules for generating RPC protocol had a couple
of bugs
- A instance of remote/rpcgen_fix.pl was not changed
to rpc/genprotocol.pl
- A dep from rpc/virnetmessage.h on the generated
rpc/virnetprotocol.h was missing
- The generated rpc/virnetprotocol.[ch] were not listed
in MAINTAINERCLEANFILES
* Makefile.am: Fix RPC protocol generation
The qemuMigrationPrepareDirect/PrepareTunnel methods accidentally
set the domain job to QEMU_JOB_MIGRATION_OUT when it should have
been QEMU_JOB_MIGRATION_IN. This didn't have any ill-effect, but
it is none-the-less wrong.
* src/qemu/qemu_migration.c: Fix job type
The code emitting taint warnings was mistakenly thinking
that guests run from the QEMU session driver were tainted
for having high privileges. This is of course nonsense
since the session driver is always unprivileged
* src/qemu/qemu_domain.c: Don't warn for high privileges in
non-privileged QEMU
If an application is using libvirt + KVM as a piece of its
internal infrastructure to perform a specific task, it can
be desirable to guarentee the VM dies when the virConnectPtr
disconnects from libvirtd. This ensures the app can't leak
any VMs it was using. Adding VIR_DOMAIN_START_AUTOKILL as
a flag when starting guests enables this to be done.
* include/libvirt/libvirt.h.in: All VIR_DOMAIN_START_AUTOKILL
* src/qemu/qemu_driver.c: Support automatic killing of guests
upon connection close
* tools/virsh.c: Add --autokill flag to 'start' and 'create'
commands
Migration is a multi-step process
1. Begin(src)
2. Prepare(dst)
3. Perform(src)
4. Finish(dst)
5. Confirm(src)
At step 2, a QEMU process is lauched in the destination to
accept the incoming migration. Occasionally the process
that is controlling the migration workflow aborts, and fails
to call step 4, Finish. This leaves a QEMU process running
on the target (albeit with paused CPUs). Unfortunately because
step 2 actives a job on the QEMU process, it is unkillable by
normal means.
By registering the VM for autokill against the src virConnectPtr
in step 2, we can ensure that the guest is forcefully killed off
if the connection is closed without step 4 being invoked
* src/qemu/qemu_migration.c: Register autokill in PrepareDirect
and PrepareTunnel. Unregister autokill on successful run
of Finish
* src/qemu/qemu_process.c: Unregister autokill when stopping a
process
Sometimes it is useful to be able to automatically destroy a guest when
a connection is closed. For example, kill an incoming migration if
the client managing the migration dies. This introduces a map between
guest 'uuid' strings and virConnectPtr objects. When a connection is
closed, any associated guests are killed off.
* src/qemu/qemu_conf.h: Add autokill hash table to qemu driver
* src/qemu/qemu_process.c, src/qemu/qemu_process.h: Add APIs
for performing autokill of guests associated with a connection
* src/qemu/qemu_driver.c: Initialize autodestroy map
For controlled shutdown we issue a 'system_powerdown' command
to the QEMU monitor. This triggers an ACPI event which (most)
guest OS wire up to a controlled shutdown. There is no equiv
ACPI event to trigger a controlled reboot. This patch attempts
to fake a reboot.
- In qemuDomainObjPrivatePtr we have a bool fakeReboot
flag.
- The virDomainReboot method sets this flag and then
triggers a normal 'system_powerdown'.
- The QEMU process is started with '-no-shutdown'
so that the guest CPUs pause when it powers off the
guest
- When we receive the 'POWEROFF' event from QEMU JSON
monitor if fakeReboot is not set we invoke the
qemuProcessKill command and shutdown continues
normally
- If fakeReboot was set, we spawn a background thread
which issues 'system_reset' to perform a warm reboot
of the guest hardware. Then it issues 'cont' to
start the CPUs again
* src/qemu/qemu_command.c: Add -no-shutdown flag if
we have JSON support
* src/qemu/qemu_domain.h: Add 'fakeReboot' flag to
qemuDomainObjPrivate struct
* src/qemu/qemu_driver.c: Fake reboot using the
system_powerdown command if JSON support is available
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
binding for system_reset command
* src/qemu/qemu_process.c: Reset the guest & start CPUs if
fakeReboot is set
Move the daemon/remote_generator.pl to src/rpc/gendispatch.pl
and move the src/remote/rpcgen_fix.pl to src/rpc/genprotocol.pl
* daemon/Makefile.am: Update for new name/location of generator
* src/Makefile.am: Update for new name/location of generator
To facilitate creation of new clients using XDR RPC services,
pull alot of the remote driver code into a set of reusable
objects.
- virNetClient: Encapsulates a socket connection to a
remote RPC server. Handles all the network I/O for
reading/writing RPC messages. Delegates RPC encoding
and decoding to the registered programs
- virNetClientProgram: Handles processing and dispatch
of RPC messages for a single RPC (program,version).
A program can register to receive async events
from a client
- virNetClientStream: Handles generic I/O stream
integration to RPC layer
Each new client program now merely needs to define the list of
RPC procedures & events it wants and their handlers. It does
not need to deal with any of the network I/O functionality at
all.
Allow RPC servers to advertise themselves using MDNS,
via Avahi
* src/rpc/virnetserver.c, src/rpc/virnetserver.h: Allow
registration of MDNS services via avahi
* src/rpc/virnetserverservice.c, src/rpc/virnetserverservice.h: Add
API to fetch the listen port number
* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Add API to
fetch the local port number
* src/rpc/virnetservermdns.c, src/rpc/virnetservermdns.h: Represent
an MDNS advertisement
To facilitate creation of new daemons providing XDR RPC services,
pull a lot of the libvirtd daemon code into a set of reusable
objects.
* virNetServer: A server contains one or more services which
accept incoming clients. It maintains the list of active
clients. It has a list of RPC programs which can be used
by clients. When clients produce a complete RPC message,
the server passes this onto the corresponding program for
handling, and queues any response back with the client.
* virNetServerClient: Encapsulates a single client connection.
All I/O for the client is handled, reading & writing RPC
messages.
* virNetServerProgram: Handles processing and dispatch of
RPC method calls for a single RPC (program,version).
Multiple programs can be registered with the server.
* virNetServerService: Encapsulates socket(s) listening for
new connections. Each service listens on a single host/port,
but may have multiple sockets if on a dual IPv4/6 host.
Each new daemon now merely has to define the list of RPC procedures
& their handlers. It does not need to deal with any network related
functionality at all.
This extends the basic virNetSocket APIs to allow them to have
a handle to the TLS/SASL session objects, once established.
This ensures that any data reads/writes are automagically
passed through the TLS/SASL encryption layers if required.
* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Wire up
SASL/TLS encryption
This provides two modules for handling SASL
* virNetSASLContext provides the process-wide state, currently
just a whitelist of usernames on the server and a one time
library init call
* virNetTLSSession provides the per-connection state, ie the
SASL session itself. This also include APIs for providing
data encryption/decryption once the session is established
* src/Makefile.am: Add to libvirt-net-rpc.la
* src/rpc/virnetsaslcontext.c, src/rpc/virnetsaslcontext.h: Generic
SASL handling code
This provides two modules for handling TLS
* virNetTLSContext provides the process-wide state, in particular
all the x509 credentials, DH params and x509 whitelists
* virNetTLSSession provides the per-connection state, ie the
TLS session itself.
The virNetTLSContext provides APIs for validating a TLS session's
x509 credentials. The virNetTLSSession includes APIs for performing
the initial TLS handshake and sending/recving encrypted data
* src/Makefile.am: Add to libvirt-net-rpc.la
* src/rpc/virnettlscontext.c, src/rpc/virnettlscontext.h: Generic
TLS handling code
Introduces a simple wrapper around the raw POSIX sockets APIs
and name resolution APIs. Allows for easy creation of client
and server sockets with correct usage of name resolution APIs
for protocol agnostic socket setup.
It can listen for UNIX and TCP stream sockets.
It can connect to UNIX, TCP streams directly, or indirectly
to UNIX sockets via an SSH tunnel or external command
* src/Makefile.am: Add to libvirt-net-rpc.la
* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Generic
sockets APIs
* tests/Makefile.am: Add socket test
* tests/virnetsockettest.c: New test case
* tests/testutils.c: Avoid overriding LIBVIRT_DEBUG settings
* tests/ssh.c: Dumb helper program for SSH tunnelling tests
This provides a new struct that contains a buffer for the RPC
message header+payload, as well as a decoded copy of the message
header. There is an API for applying a XDR encoding & decoding
of the message headers and payloads. There are also APIs for
maintaining a simple FIFO queue of message instances.
Expected usage scenarios are:
To send a message
msg = virNetMessageNew()
...fill in msg->header fields..
virNetMessageEncodeHeader(msg)
...loook at msg->header fields to determine payload filter
virNetMessageEncodePayload(msg, xdrfilter, data)
...send msg->bufferLength worth of data from buffer
To receive a message
msg = virNetMessageNew()
...read VIR_NET_MESSAGE_LEN_MAX of data into buffer
virNetMessageDecodeLength(msg)
...read msg->bufferLength-msg->bufferOffset of data into buffer
virNetMessageDecodeHeader(msg)
...look at msg->header fields to determine payload filter
virNetMessageDecodePayload(msg, xdrfilter, data)
...run payload processor
* src/Makefile.am: Add to libvirt-net-rpc.la
* src/rpc/virnetmessage.c, src/rpc/virnetmessage.h: Internal
message handling API.
* testutils.c, testutils.h: Helper for printing binary differences
* virnetmessagetest.c: Validate all XDR encoding/decoding
This patch defines the basics of a generic RPC protocol in XDR.
This is wire ABI compatible with the original remote_protocol.x.
It takes everything except for the RPC calls / events from that
protocol
- The basic header virNetMessageHeader (aka remote_message_header)
- The error object virNetMessageError (aka remote_error)
- Two dummy objects virNetMessageDomain & virNetMessageNetwork
sadly needed to keep virNetMessageError ABI compatible with
the old remote_error
The RPC protocol supports method calls, async events and
bidirectional data streams as before
* src/Makefile.am: Add rules for generating RPC code from
protocol & define a new libvirt-net-rpc.la helper library
* src/rpc/virnetprotocol.x: New generic RPC protocol
GCC complained about a C99 for-loop declaration outside of C99 mode
when compiling on RHEL 5.
* src/qemu/qemu_driver.c (qemudDomainPinVcpuFlags): Avoid C99 for
loop, since gcc 4.1.2 hates it.
This patch fixes the compilation of netlink.c and interface.c on those
systems missing either libnl or that have an older linux/if_link.h
include file not supporting macvtap or VF_PORTS.
WITH_MACVTAP is '1' if newer include files were detected, '0' otherwise.
IFLA_PORT_MAX is defined in linux/if_link.h if yet more functionality is
supported.
volDelete used to return VIR_ERR_INTERNAL_ERROR when attempting to
delete a volume which was still being allocated. It should return
VIR_ERR_OPERATION_INVALID.
* src/storage/storage_driver.c: Fix return of volDelete.
See previous patch for why this is good...
* src/xen/xen_driver.h (xenXMConfCache): Manage filename
dynamically.
* src/xen/xm_internal.c (xenXMConfigCacheAddFile)
(xenXMConfigFree, xenXMDomainDefineXML): Likewise.
POSIX allows implementations where PATH_MAX is undefined, leading
to compilation error. Not to mention that even if it is defined,
it is often wasteful in relation to the amount of data being stored.
All clients of vol->key were audited, and found not to care about
whether key is static or dynamic, except for these offenders:
* src/datatypes.h (struct _virStorageVol): Manage key dynamically.
* src/datatypes.c (virReleaseStorageVol): Free key.
(virGetStorageVol): Copy key.
In a second cleanup step this patch makes several interface functions from macvtap.c commonly available by moving them into interface.c and prefixing their names with 'iface'. Those functions taking Linux-specific structures as parameters are only visible on Linux.
ifaceRestoreMacAddress returns the return code from the ifaceSetMacAddr call and display an error message if setting the MAC address did not work. The caller is unchanged and still ignores the return code (which is ok).
In a first cleanup step, make nlComm from macvtap.c commonly available
for other code to use. Since nlComm uses Linux-specific structures as
parameters it's prototype is only visible on Linux.
Files under src/util must not depend on src/conf
Solve the macvtap problem by moving the definition
of macvtap modes from domain_conf.h into macvtap.h
* src/util/macvtap.c, src/util/macvtap.h: Add enum
for macvtap modes
* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove
enum for macvtap modes
For virtio disks and interfaces, qemu allows users to enable or disable
ioeventfd feature. This means, qemu can execute domain code, while
another thread waits for I/O event. Basically, in some cases it is win,
in some loss. This feature is available via 'ioeventfd' attribute in disk
and interface <driver> element. It accepts 'on' and 'off'. Leaving this
attribute out defaults to hypervisor decision.
The following patch addresses the problem that when a PASSTHROUGH
mode DIRECT NIC connection is made the MAC address of the NIC is
not automatically set and reset to the configured VM MAC and
back again.
The attached patch fixes this problem by setting and resetting the MAC
while remembering the previous setting while the VM is running.
This also works if libvirtd is restarted while the VM is running.
the patch passes make syntax-check
Since we virEventRegisterDefaultImpl is now a public API, callers need
a way to invoke the default registered Handle and Timeout functions. We
already have general functions for these internally, so promote
them to the public API.
v2:
Actually add APIs to libvirt.h
* virDomainDefParse: There is a goto label "no_memory", which
reports OOM error, and then fallthrough label "error". This
patch changes things like following:
virReportOOMError();
goto error;
into:
goto no_memory;
Removes special case code from the generator and handle additional
methods.
The generated version of remoteDispatchDomainPinVcpu(Flags) has no
length check, but this check was useless anyway as it was applied to
data that was already deserialized from its XDR form.
Pinning to all physical cpus means resetting, hence it is preferable to
delete vcpupin setting of XML.
This patch changes qemu driver to delete vcpupin setting by invoking
virDomainVcpupinDel API when pinning the specified virtual cpu to
all host physical cpus.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
This patch add the private API (virDomainVcpupinDel).
This API can delete the vcpupin setting of a specified virtual cpu.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Implemented as setting NUMA policy between fork and exec as a hook,
using libnuma. Only support memory tuning on domain process currently.
For the nodemask out of range, will report soft warning instead of
hard error in libvirt layer. (Kernel will be silent as long as one
of set bit in the nodemask is valid on the host. E.g. For a host
has two NUMA nodes, kernel will be silent for nodemask "01010101").
So, soft warning is the only thing libvirt can do, as one might want
to specify the numa policy prior to a node that doesn't exist yet,
however, it may come as hotplug soon.
* src/conf/domain_conf.h: Introduce one new struct for representing
NUMA tuning related stuffs.
* src/conf/domain_conf.c: Parse and format numatune XML.
When building libvirt without libvirtd, we will receive the following error
message:
make[3]: Entering directory `/home/wency/rpmbuild/BUILD/libvirt-0.9.2/tools'
CC virsh-virsh.o
CC virsh-console.o
GEN virt-xml-validate
GEN virt-pki-validate
CCLD virsh
./src/.libs/libvirt.so: undefined reference to `numa_available'
./src/.libs/libvirt.so: undefined reference to `numa_max_node'
collect2: ld returned 1 exit status
The reason is that: we check numactl only when building qemu driver, and qemu
driver will not be built when bulding without libvirtd. So with_numactl's
value is check and we will not link libnuma.so.
In the other function, we call numa_available() and numa_max_node() only
when HAVE_NUMACTL is 1. We should do the same check in the function nodeGetMemoryStats().
During a savevm operation, libvirt will now use fd migration if qemu
supports it. When the AppArmor driver is enabled, AppArmorSetFDLabel()
is used but since this function simply returns '0', the dynamic AppArmor
profile is not updated and AppArmor blocks access to the save file. This
patch implements AppArmorSetFDLabel() to get the pathname of the file by
resolving the fd symlink in /proc, and then gives that pathname to
reload_profile(), which fixes 'virsh save' when AppArmor is enabled.
Reference: https://launchpad.net/bugs/795800
Most of the safezero() implementations return -1 on error,
setting errno. The safezero() impl using posix_fallocate()
though returned a positive errno value on error (due to
the unusual API contract of posix_fallocate() compared to
most syscall APIs).
* src/util/util.c: Ensure safezero() returns -1 and sets
errno on error.
* src/storage/storage_backend.c: Change safezero != 0 to
< 0 for detecting errors
If the 'mac_filter' configuration parameter is enabled, and there
is a failure to enable filtering, no error is reported back to
the caller. Also fix some bogus whitespace indentation for
hugetlbfs_mount
* src/qemu/qemu_conf.c: Add missing error reporting
Even though rpc uses 'unsigned int' for the _len parameter that
passes the length of item<length>, the public libvirt APIs all
use 'int' and filter out lengths < 0, except for virDomainSendKey.
* include/libvirt/libvirt.h.in (virDomainSendKey): All other APIs
use int for array length.
* src/libvirt.c (virDomainSendKey): Adjust.
* src/driver.h (virDrvDomainSendKey): Likewise.
* daemon/remote_generator.pl: Likewise.
Detected by autobuild.sh when cross-building for mingw.
Introduced in commits ce76e85 and af35cec.
* src/nodeinfo.c (nodeGetCPUStats, nodeGetMemoryStats): Mark
parameters as potentially unused.
The position of the struct parameter in the function signature
differs. Instead of hardcoding the handling for this add an annotation
to the .x file to define the position.
The LXC driver networking uses veth device pairs. These can
be easily hooked into the network filtering code.
* src/lxc/lxc_driver.c: Add calls to setup/teardown nwfilter
The algorithm for autoassigning vethXXX devices, was always
skipping over the starting dev index when finding a free
name for the guest device. This should only be done if the host
device was autoallocated.
* src/lxc/veth.c: Don't skip over veth indexes
Prefer bootindex=N option for -device over the old way -boot ORDER
possibly accompanied with boot=on option for -drive. This gives us full
control over which device will actually be used for booting guest OS.
Moreover, if qemu doesn't support boot=on, this is the only way to boot
of certain disks in some configurations (such as virtio disks when used
together IDE disks) without transforming domain XML to use per device
boot elements.
When an operation started by virDomainBlockPullAll completes (either with
success or with failure), raise an event to indicate the final status. This
allows an API user to avoid polling on virDomainBlockPullInfo if they would
prefer to use the event mechanism.
* daemon/remote.c: Dispatch events to client
* include/libvirt/libvirt.h.in: Define event ID and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle the new event
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for block_stream completion and emit a libvirt block pull event
* src/remote/remote_driver.c: Receive and dispatch events to application
* src/remote/remote_protocol.x: Wire protocol definition for the event
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for BLOCK_STREAM_COMPLETED event
from QEMU monitor
Signed-off-by: Adam Litke <agl@us.ibm.com>
The virDomainBlockPull* family of commands are enabled by the
'block_stream' and 'info block_stream' qemu monitor commands.
* src/qemu/qemu_driver.c src/qemu/qemu_monitor_text.[ch]: implement disk
streaming by using the stream and info stream text monitor commands
* src/qemu/qemu_monitor_json.[ch]: implement commands using the qmp monitor
Signed-off-by: Adam Litke <agl@us.ibm.com>
Acked-by: Daniel P. Berrange <berrange@redhat.com>
The generator can handle DomainBlockPullAll and DomainBlockPullAbort.
DomainBlockPull and DomainBlockPullInfo must be written by hand.
* src/remote/remote_protocol.x: provide defines for the new entry points
* src/remote/remote_driver.c daemon/remote.c: implement the client and
server side
* src/remote_protocol-structs: structure definitions for protocol verification
Signed-off-by: Adam Litke <agl@us.ibm.com>
Set up the types for the block pull functions and insert them into the
virDriver structure definition. Symbols are exported in this patch to prevent
documentation compile failures.
* include/libvirt/libvirt.h.in: new API
* src/driver.h: add the new entry to the driver structure
* python/generator.py: fix compiler errors, the actual python bindings are
implemented later
* src/libvirt_public.syms: export symbols
Signed-off-by: Adam Litke <agl@us.ibm.com>
From a security pov copy and paste between the guest and the client is not
always desirable. So we need to be able to enable/disable this. The best place
to do this from an administration pov is on the hypervisor, so the qemu cmdline
is getting a spice disable-copy-paste option, see bug 693645. Example qemu
invocation:
qemu -spice port=5932,disable-ticketing,disable-copy-paste
https://bugzilla.redhat.com/show_bug.cgi?id=693661
Drivers load running persistent and transient domain configs before
inactive persistent domain configs, however only the latter would set a
domain's autostart flag. This mismatch between the loaded and on-disk
state could later cause problems with "virsh autostart":
# virsh autostart example
error: Failed to mark domain example as autostarted
error: Failed to create symlink '/etc/libvirt/qemu/autostart/example.xml to '/etc/libvirt/qemu/example.xml': File exists
This patch ensures the autostart flag is set correctly even when the
domain is already defined.
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=632100https://bugzilla.redhat.com/show_bug.cgi?id=675319
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Add public virDomainSendKey() and enum libvirt_keycode_set
for the @codeset.
Python version of virDomainSendKey() has not been implemented yet,
it will be done soon.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Previously, the parent process opened 'null' to /dev/null, then
the child process closes 'null' as well as 'childout'. But if
childout was set to be null, then this is a double close. At
least the double close was confined to the child process after a
fork, and therefore there is no risk of another thread opening
an fd of the same value to be bitten by the double close, but it
is always better to avoid double-close to begin with.
Additionally, if all three fds were specified, then opening
'null' was wasted.
This patch fixes things to lazily open null on the first use,
then guarantees it gets closed exactly once.
* src/util/command.c (getDevNull): New helper function.
(virExecWithHook): Use it to avoid spurious opens and double close.
This also reduces malloc pressure for invoking a child when
VIR_DEBUG is enabled.
* src/util/command.c (virExecWithHook): Drop debug, since the only
caller (virCommandRunAsync) also prints debug info.
If qemu supports -chardev, our char frontend aliases are ex. 'charserial0'
not just 'serial0'. Typically we don't use this code path because the
pty's are scraped from stdout.
Qemu once supported following memory stats which will returned by
"query_balloon":
stat_put(dict, "actual", actual);
stat_put(dict, "mem_swapped_in", dev->stats[VIRTIO_BALLOON_S_SWAP_IN]);
stat_put(dict, "mem_swapped_out", dev->stats[VIRTIO_BALLOON_S_SWAP_OUT]);
stat_put(dict, "major_page_faults", dev->stats[VIRTIO_BALLOON_S_MAJFLT]);
stat_put(dict, "minor_page_faults", dev->stats[VIRTIO_BALLOON_S_MINFLT]);
stat_put(dict, "free_mem", dev->stats[VIRTIO_BALLOON_S_MEMFREE]);
stat_put(dict, "total_mem", dev->stats[VIRTIO_BALLOON_S_MEMTOT]);
But it later disabled all the stats except "actual" by commit
07b0403dfc2b2ac179ae5b48105096cc2d03375a.
libvirt doesn't parse "actual", so user will always see a empty result
with "virsh dommemstat $domain". Even qemu haven't disabled the stats,
we should support parsing "actual".
There is the case where cpu affinites for vcpu of qemu doesn't work
correctly. For example, if only one vcpupin setting entry is provided
and its setting is not for vcpu0, it doesn't work.
# virsh dumpxml VM
...
<vcpu>4</vcpu>
<cputune>
<vcpupin vcpu='3' cpuset='9-11'/>
</cputune>
...
# virsh start VM
Domain VM started
# virsh vcpuinfo VM
VCPU: 0
CPU: 31
State: running
CPU time: 2.5s
CPU Affinity: yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
VCPU: 1
CPU: 12
State: running
CPU time: 0.9s
CPU Affinity: yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
VCPU: 2
CPU: 30
State: running
CPU time: 1.5s
CPU Affinity: yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
VCPU: 3
CPU: 13
State: running
CPU time: 1.7s
CPU Affinity: yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
This patch fixes this problem.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Since the addition of the lock manager framework in 6a943419c5
dlopen is always required, but the checks in configure wasn't changed
to reflect that. This didn't show up directly because the VirtualBox
driver linking dlopen in covered it. But disabling the VirtualBox
driver makes the build fail due to missing dlopen.
Change the dlopen check in configure to pick up dlopen when available.
Reported by Ruben Kerkhof.
This patch deprecates following enums:
VIR_DOMAIN_MEM_CURRENT
VIR_DOMAIN_MEM_LIVE
VIR_DOMAIN_MEM_CONFIG
VIR_DOMAIN_VCPU_LIVE
VIR_DOMAIN_VCPU_CONFIG
VIR_DOMAIN_DEVICE_MODIFY_CURRENT
VIR_DOMAIN_DEVICE_MODIFY_LIVE
VIR_DOMAIN_DEVICE_MODIFY_CONFIG
And modify internal codes to use virDomainModificationImpact.
The below patch decreases the response time of libvirt to errors reported by Qemu upon startup by checking whether the qemu process is still alive while polling for the local socket to show up.
This patch also introduces a special handling of signal for the Win32 part of virKillProcess.
If qemu supports multi function PCI device, the format of the PCI address passed
to qemu is "bus=pci.0,multifunction=on,addr=slot.function".
If qemu does not support multi function PCI device, the format of the PCI address
passed to qemu is "bus=pci.0,addr=slot".
Hot pluging/unpluging multi PCI device is not supported now. So the function
of hotplugged PCI device must be 0. When we hot unplug it, we should set release
all functions in the slot.
We save all used PCI address in the hash table. The key is generated by domain,
bus and slot now. We will support multi function PCI device, so the key should
be generated by domain, bus, slot and function.
We do not support to hot unplug multi function PCI device now. If the device is
one function of multi function PCI device, we shoul not allow to hot unplugg
it.
XenAPI session login can fail for a number of reasons, but currently no
specific
reason is displayed to the user, e.g.:
virsh -c XenAPI://citrix-xen.example.com/
Enter username for citrix-xen.example.com: root
Enter root's password for citrix-xen.example.com:
error: authentication failed: (null)
error: failed to connect to the hypervisor
This patch displays the session error description on failure.
Coverity complained about these intentional fallthrough cases, but
not about other cases that were explicitly marked with nice comments.
For some reason, Coverity doesn't seem smart enough to parse the
up-front English comment in virsh about intentional fallthrough :)
* tools/virsh.c (cmdVolSize): Mark fallthrough in a more typical
fashion.
* src/conf/nwfilter_conf.c (virNWFilterRuleDefDetailsFormat)
(virNWFilterRuleDetailsParse): Mark explicit fallthrough.
Detected by Coverity. The beginning of the function already filtered
out NULL objectContentList as invalid. Further investigation shows:
esxVI_RetrieveProperties is generated and returns a list of objects
that match the given propertyFilterSpec.
esxVI_LookupObjectContentByType then tests whether the result
corresponds to the expected occurrence and reports an error otherwise.
This simplifies the callers of esxVI_LookupObjectContentByType, but
due to the missing dereference the check was never performed because
the code thought that at least one item was obtained. NULL represents
an empty list. This is a potential segfault fix because callers of
esxVI_LookupObjectContentByType that specified "required" occurrence
assume *objectContentList to be non-NULL when
esxVI_LookupObjectContentByType succeeds.
* src/esx/esx_vi.c (esxVI_LookupObjectContentByType): Check
correct pointer.
Detected by Coverity. The only ways to get to the cleanup label
were by an early abort (list still unassigned) or after successfully
transferring list to dest, so there is no list to clean up.
* src/secret/secret_driver.c (loadSecrets): Kill dead code.
Detected by Coverity. All existing callers happen to be in
range, so this isn't too serious.
* src/qemu/qemu_cgroup.c (qemuCgroupControllerActive): Check
bounds before dereference.
Coverity already saw through a NULL dereference without these
annotations, and gcc is still too puny to do good NULL analysis.
But clang still benefits (and is easier to run than coverity),
not to mention that adding this bit of documentation to the code
may help future developers remember the constraints.
* src/util/uuid.h (virGetHostUUID, virUUIDFormat): Document
restrictions, for improved static analysis.
Detected by Coverity. Commit a98d8f0d tried to make uuid debugging
more robust, but missed some APIs. And on the APIs that it visited,
the mere act of preparing the debug message ends up dereferencing
uuid prior to the null check. Which means the APIs which are supposed
to gracefully reject NULL arguments now end up with SIGSEGV.
* src/libvirt.c (VIR_UUID_DEBUG): New macro.
(virDomainLookupByUUID, virDomainLookupByUUIDString)
(virNetworkLookupByUUID, virNetworkLookupByUUIDString)
(virStoragePoolLookupByUUID, virStoragePoolLookupByUUIDString)
(virSecretLookupByUUID, virSecretLookupByUUIDString)
(virNWFilterLookupByUUID, virNWFilterLookupByUUIDString): Avoid
null dereference.
Similar in nature to commit fd21ecfd, which shut up valgrind.
sigaction is apparently a nasty interface for analyzer tools,
at least for how many false positives it generates.
* src/util/command.c (virExecWithHook): Initialize entire var, since
coverity gripes about the (unused and non-standard) sa_restorer.
Detected by Coverity. The code was doing math on shifted unsigned
char (which promotes to int), then promoting that to unsigned long
during assignment to size. On 64-bit platforms, this risks sign
extending values of size > 2GiB. Bug present since commit
489fd3 (v0.6.0).
I'm not sure if a specially-crafted bogus qcow2 image could
exploit this, although it's probably not possible, since we
were already checking for the computed results being within
range of our fixed-size buffer.
* src/util/storage_file.c (qcowXGetBackingStore): Avoid sign
extension.
Add a simple handshake with the lxc_controller process so we can detect
process startup failures. We do this by adding a new --handshake cli arg
to lxc_controller for passing a file descriptor. If the process fails to
launch, we scrape all output from the logfile and report it to the user.
Seems reasonable to have all command wrappers in the same place
v2:
Dont move SetInherit
v3:
Comment spelling fix
Adjust WARN0 comment
Remove spurious #include movement
Don't include sys/types.h
Combine virExec enums
Signed-off-by: Cole Robinson <crobinso@redhat.com>
virGetVersion itself doesn't take a virConnectPtr, but in order to obtain
the hypervisor version against which libvirt was compiled it is used in
combination with virConnectGetType like this:
hvType = virConnectGetType(conn)
virGetVersion(&libVer, hvType, &typeVer)
When virConnectGetType is called on a remote connection then the remote
driver returns the type of the underlying driver on the server side, for
example QEMU. Then virGetVersion compares hvType to a set of strings that
depend on configure options and returns LIBVIR_VERSION_NUMBER in most
cases. Now this fails in case libvirt on the client side is just compiled
with the remote driver enabled only and the server side has the actual
driver such as the QEMU driver. It just happens to work when the actual
driver is enabled on client and server side. But that's not always true.
I noticed this on FreeBSD:
freebsd# virsh -c qemu+tcp://192.168.178.22/system version
Compiled against library: libvir 0.9.2
error: failed to get the library version
error: this function is not supported by the connection driver: virGetVersion
This is not FreeBSD specific, happens on Windows as well due to the
similar driver support configuration. The problem is that virConnectGetType
returns QEMU, but virGetVersion on the client side only accepts Remote
as hvType due to all other drivers being disabled on the client side.
Daniel P. Berrange suggested to get rid of all the conditional code in
virGetVersion, ignoring the hvType and always setting typeVer to
LIBVIR_VERSION_NUMBER. virConnectGetVersion is supposed to be used to
obtain the hypervisor version.
When peer-2-peer migration was invoked by a client supporting
v3, but where the target server only supported v2, we'd not
correctly shutdown the guest.
* src/qemu/qemu_migration.c: Ensure guest is shutdown in
v2 peer 2 peer migration
The v2 migration protocol doesn't use cookies, so we should not
be raising an error if the cookie parameters are NULL.
* src/qemu/qemu_migration.c: Don't raise error if cookie is NULL
The error code for virKillProcess is returned in the errno variable
not the return value. THis mistake caused the logs to be filled with
errors when shutting down QEMU processes
* src/qemu/qemu_process.c: Fix process kill check.
VirtualBox 4.0.8 changed the registry key layout. Before the version
number was in a Version key. Now the Version key contains %VER% and
the actual version number is in VersionExt now.
Move value lookup code into its own function: vboxLookupRegistryValue.
This commit is safe precisely because there has been no release
for any of the enum values being deleted (they were added post-0.9.1).
After the 0.9.2 release, we can then take advantage of
virDomainModificationImpact in more places.
* include/libvirt/libvirt.h.in (virDomainModificationImpact): New
enum.
(virDomainSchedParameterFlags, virMemoryParamFlags): Delete, since
these were never released, and the new enum works fine here.
* src/libvirt.c (virDomainGetMemoryParameters)
(virDomainSetMemoryParameters)
(virDomainGetSchedulerParametersFlags)
(virDomainSetSchedulerParametersFlags): Update documentation.
* src/qemu/qemu_driver.c (qemuDomainSetMemoryParameters)
(qemuDomainGetMemoryParameters, qemuSetSchedulerParametersFlags)
(qemuSetSchedulerParameters, qemuGetSchedulerParametersFlags)
(qemuGetSchedulerParameters): Adjust clients.
* tools/virsh.c (cmdSchedinfo, cmdMemtune): Likewise.
Based on ideas by Daniel Veillard and Hu Tao.
This fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=702044https://bugzilla.redhat.com/show_bug.cgi?id=709454
Both of these complain of a failure to use an image file that resides
on a read-only NFS volume. The function in the DAC security driver
that chowns image files to the qemu user:group before using them
already has special cases to ignore failure of chown on read-only file
systems, and in a few other cases, but it hadn't been checking for
EINVAL, which is what is returned if the qemu user doesn't even exist
on the NFS server.
Since the explanation of EINVAL in the chown man page almost exactly
matches the log message already present for the case of EOPNOTSUPP,
I've just added EINVAL to that same conditional.
Coverity couldn't see that priv is NULL on failure. But on failure,
we might as well guarantee that callers don't try to free uninitialized
memory.
* src/remote/remote_driver.c (remoteGenericOpen): Even on failure,
pass priv back to caller.
Coverity complained that infd could be -1 at the point where it is
passed to write, when in reality, this code can only be reached if
infd is non-negative.
* src/util/command.c (virCommandProcessIO): Help out coverity.
Detected by Coverity. Bug introduced in 08106e2044 (unreleased).
* src/conf/domain_conf.c (virDomainChannelDefCheckABIStability):
Use correct sizeof operand.
Detected by Coverity. Introduced in commit aaf2b70, and turned into
a regression in the next few commits through 4e6e6672 (unreleased).
* src/conf/domain_event.c (virDomainEventStateFree): Free object,
per documentation.
Detected by Coverity. This leaked a cpumap on every iteration
of the loop. Leak introduced in commit 1cc4d02 (v0.9.0).
* src/qemu/qemu_process.c (qemuProcessSetVcpuAffinites): Plug
leak, and hoist allocation outside loop.
Spotted by coverity. Triggers on failed stat, although I'm not sure
how easy that condition is, so I'm not sure if this is a runtime
memory hog. Regression introduced in commit 8077d64 (unreleased).
* src/util/storage_file.c (virStorageFileGetMetadataFromFD):
Reduce need for malloc, avoiding a leak.
Coverity detected that options was being set by strdup but never
freed. But why even bother with an options variable? The options
parameter never changes! Leak present since commit 44948f5b (0.7.0).
This function could probably be rewritten to take better advantage
of virCommand, but that is more invasive.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemMount): Avoid wasted strdup, and
guarantee proper cleanup on all paths.
Detected by Coverity. While it is possible on OOM condition, as
well as with bad code that passes binary == NULL, it is unlikely
to be encountered in the wild.
* src/util/command.c (virCommandNewArgList): Don't leak memory.
In v3 migration, once migration is completed, the VM needs
to be left in a paused state until after Finish3 has been
executed on the target. Only then will the VM be killed
off. When using non-JSON QEMU monitor though, we don't
receive any 'STOP' event from QEMU, so we need to manually
set our state offline & thus release lock manager leases.
It doesn't hurt to run this on the JSON case too, just in
case the event gets lost somehow
* src/qemu/qemu_migration.c: Explicitly set VM state to
paused when migration completes
The change 18c2a59206 caused
some regressions in behaviour of virDomainBlockStats
and virDomainBlockInfo in the QEMU driver.
The virDomainBlockInfo API stopped working for inactive
guests if querying a block device.
The virDomainBlockStats API did not promptly report
an error if the guest was not running in some cases.
* src/qemu/qemu_driver.c: Fix inactive guest handling
in BlockStats/Info APIs
The qemuAuditDisk calls in disk hotunplug operations were being
passed 'ret >= 0', but the code which sets ret to 0 was not yet
executed, and the error path had already jumped to the 'cleanup'
label. This meant hotunplug failures were never audited, and
hotunplug success was audited as a failure
* src/qemu/qemu_hotplug.c: Fix auditing of hotunplug
When virLockDriverAcquire is invoked during hotplug the state
parameter will be left as NULL.
* src/locking/lock_driver_nop.c,
src/locking/lock_driver_sanlock.c: Don't reference NULL state
parameter
Refactoring of the lock manager hotplug methods lost the
ret = 0 assignment for successful return path
* src/locking/domain_lock.c: Add missing ret = 0 assignments
Commit 4454a9efc7 introduced bad
behaviour on the VIR_EVENT_HANDLE_ERROR condition. This condition
is only hit when an invalid FD is used in poll() (typically due
to a double-close bug). The QEMU monitor code was treating this
condition as non-fatal, and thus libvirt would poll() in a fast
loop forever burning 100% CPU. VIR_EVENT_HANDLE_ERROR must be
handled in the same way as VIR_EVENT_HANDLE_HANGUP, killing the
QEMU instance.
* src/qemu/qemu_monitor.c: Treat VIR_EVENT_HANDLE_ERROR as EOF
In between fork and exec, a connection to sanlock is acquired
and the socket file descriptor is intionally leaked to the
child process. sanlock watches this FD for POLL_HANGUP to
detect when QEMU has exited. We don't want a rogus/compromised
QEMU from issuing sanlock RPC calls on the leaked FD though,
since that could be used to DOS other guests. By calling
sanlock_restrict() on the socket before exec() we can lock
it down.
* configure.ac: Check for sanlock_restrict API
* src/locking/domain_lock.c: Restrict lock acquired in
process startup phase
* src/locking/lock_driver.h: Add VIR_LOCK_MANAGER_ACQUIRE_RESTRICT
* src/locking/lock_driver_sanlock.c: Add call to sanlock_restrict
when requested by VIR_LOCK_MANAGER_ACQUIRE_RESTRICT flag
Based on the equivalent qemu driver code
* src/libxl/libxl_driver.c: refactor the Start save and restore
routines of the driver and adds the new entry points for
managed saves handling
Sanlock is a project that implements a disk-paxos locking
algorithm. This is suitable for cluster deployments with
shared storage.
* src/Makefile.am: Add dlopen plugin for sanlock
* src/locking/lock_driver_sanlock.c: Sanlock driver
* configure.ac: Check for sanlock
* libvirt.spec.in: Add a libvirt-lock-sanlock RPM
* src/conf/domain_conf.c, src/conf/domain_conf.h: APIs for
inserting/finding/removing virDomainLeaseDefPtr instances
* src/qemu/qemu_driver.c: Wire up hotplug/unplug for leases
* src/qemu/qemu_hotplug.h, src/qemu/qemu_hotplug.c: Support
for hotplug and unplug of leases
Some lock managers associate state with leases, allowing a process
to temporarily release its leases, and re-acquire them later, safe
in the knowledge that no other process has acquired + released the
leases in between.
This is already used between suspend/resume operations, and must
also be used across migration. This passes the lockstate in the
migration cookie. If the lock manager uses lockstate, then it
becomes compulsory to use the migration v3 protocol to get the
cookie support.
* src/qemu/qemu_driver.c: Validate that migration v2 protocol is
not used if lock manager needs state transfer
* src/qemu/qemu_migration.c: Transfer lock state in migration
cookie XML
The QEMU integrates with the lock manager instructure in a number
of key places
* During startup, a lock is acquired in between the fork & exec
* During startup, the libvirtd process acquires a lock before
setting file labelling
* During shutdown, the libvirtd process acquires a lock
before restoring file labelling
* During hotplug, unplug & media change the libvirtd process
holds a lock while setting/restoring labels
The main content lock is only ever held by the QEMU child process,
or libvirtd during VM shutdown. The rest of the operations only
require libvirtd to hold the metadata locks, relying on the active
QEMU still holding the content lock.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h,
src/qemu/libvirtd_qemu.aug, src/qemu/test_libvirtd_qemu.aug:
Add config parameter for configuring lock managers
* src/qemu/qemu_driver.c: Add calls to the lock manager
To facilitate use of the locking plugins from hypervisor drivers,
introduce a higher level API for locking virDomainObjPtr instances.
In includes APIs targetted to VM startup, and hotplug/unplug
* src/Makefile.am: Add domain lock API
* src/locking/domain_lock.c, src/locking/domain_lock.h: High
level API for domain locking
To allow hypervisor drivers to assume that a lock driver impl
will be guaranteed to exist, provide a 'nop' impl that is
compiled into the library
* src/Makefile.am: Add nop driver
* src/locking/lock_driver_nop.c, src/locking/lock_driver_nop.h:
Nop lock driver implementation
* src/locking/lock_manager.c: Enable direct access of 'nop'
driver, instead of dlopen()ing it.
Define the basic framework lock manager plugins. The
basic plugin API for 3rd parties to implemented is
defined in
src/locking/lock_driver.h
This allows dlopen()able modules for alternative locking
schemes, however, we do not install the header. This
requires lock plugins to be in-tree allowing changing of
the lock manager plugin API in future.
The libvirt code for loading & calling into plugins
is in
src/locking/lock_manager.{c,h}
* include/libvirt/virterror.h, src/util/virterror.c: Add
VIR_FROM_LOCKING
* src/locking/lock_driver.h: API for lock driver plugins
to implement
* src/locking/lock_manager.c, src/locking/lock_manager.h:
Internal API for managing locking
* src/Makefile.am: Add locking code
A lock manager may operate in various modes. The direct mode of
operation is to obtain locks based on the resources associated
with devices in the XML. The indirect mode is where the app
creating the domain provides explicit leases for each resource
that needs to be locked. This XML extension allows for listing
resources in the XML
<devices>
...
<lease>
<lockspace>somearea</lockspace>
<key>thequickbrownfoxjumpsoverthelazydog</key>
<target path='/some/lease/path' offset='23432'/>
</lease>
...
</devices>
The 'lockspace' is a unique identifier for the lockspace which
the lease is associated
The 'key' is a unique identifier for the resource associated
with the lease.
The 'target' is the file on disk where the leases are held.
* docs/schemas/domain.rng: Add lease schema
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing and
formatting for leases
* tests/qemuxml2argvdata/qemuxml2argv-lease.args,
tests/qemuxml2argvdata/qemuxml2argv-lease.xml,
tests/qemuxml2xmltest.c: Test XML handling for leases
Allow the parent process to perform a bi-directional handshake
with the child process during fork/exec. The child process
will fork and do its initial setup. Immediately prior to the
exec(), it will stop & wait for a handshake from the parent
process. The parent process will spawn the child and wait
until the child reaches the handshake point. It will do
whatever extra setup work is required, before signalling the
child to continue.
The implementation of this is done using two pairs of blocking
pipes. The first pair is used to block the parent, until the
child writes a single byte. Then the second pair pair is used
to block the child, until the parent confirms with another
single byte.
* src/util/command.c, src/util/command.h,
src/libvirt_private.syms: Add APIs to perform a handshake
Regression introduced in commit d6623003 (v0.8.8) - using the
wrong sizeof operand meant that security manager private data
was overlaying the allowDiskFormatProbing member of struct
_virSecurityManager. This reopens disk probing, which was
supposed to be prevented by the solution to CVE-2010-2238.
* src/security/security_manager.c
(virSecurityManagerGetPrivateData): Use correct offset.
Commit 2d6adabd53 replaced qsorting disk
and controller devices with inserting them at the right position. That
was to fix unnecessary reordering of devices. However, when parsing
domain XML devices are just taken in the order in which they appear in
the XML since. Use the correct insertion algorithm to honor device
target.
Remove some special case code that took care of mapping hyper to the
correct C types.
As the list of procedures that is allowed to map hyper to long is fixed
put it in the generator instead annotations in the .x files. This
results in simpler .x file parsing code.
Use macros for hyper to long assignments that perform overflow checks
when long is smaller than hyper. Map hyper to long long by default.
Suggested by Eric Blake.
The gnutls_certificate_type_set_priority method is deprecated.
Since we already set the default gnutls priority, and do not
support OpenGPG credentials in any case, it was not serving
any useful purpose and can be removed
* src/remote/remote_driver.c: Remove src/remote/remote_driver.c
call
Convert openvzLocateConfFile to a replaceable function pointer to
allow testing the config file parsing without rewriting the whole
OpenVZ config parsing to a more testable structure.
Substitute VIR_ERR_NO_SUPPORT with VIR_ERR_INTERNAL_ERROR. Error
like following is not what user want to see.
error : pciDeviceIsAssignable:1487 : this function is not supported
by the connection driver: Device 0000:07:10.0 is behind a switch
lacking ACS and cannot be assigned
This function is also affected by getline conversion. But this
didn't result in a regression in general, because the difference
would only affect the behavior of the function when the line in
/proc/vz/vestat for the given vpsid wasn't found. Under normal
conditions this should not happen.
The regression fix in 3aab7f2d6b altered the error handling.
getline returns -1 on failure to read a line (including EOF). The
original openvzReadConfigParam function using openvz_readline only
treated EOF as not-found. The current getline version treats all
getline failures as not-found.
This patch fixes this and distinguishes EOF from other getline
failures.
Since directories can be used for <filesystem> passthrough, they are
basically storage volumes.
v2:
Skip ., .., lost+found dirs
v3:
Use gnulib last_component
v4:
Use gnulib "dirname.h", not system <dirname.h>
Don't skip lost+found
If spice graphics has no <channel> elements, the output graphics XML
is messed up. To prevent this, we need to end the <graphics> element
just before adding any compression selecting elements.
The virSysinfoIsEqual method was mistakenly inside a #ifndef WIN32
conditional.
The existing virSysinfoFormat is also stubbed out on Win32, even
though the code works without any trouble. This breaks XML output
on Win32, so the stub is removed.
virsh migrate mistakenly had some variables inside the conditional
* src/util/sysinfo.c: Build virSysinfoIsEqual on Win32 and remove
Win32 stub for virSysinfoFormat
* tools/virsh.c: Fix variable declaration on Win32
Update the qemuDomainMigrateBegin method so that it accepts
an optional incoming XML document. This will be validated
for ABI compatibility against the current domain config,
and if this check passes, will be passed back out for use
by the qemuDomainMigratePrepare method on the target
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h,
src/qemu/qemu_migration.c: Allow custom XML to be passed
To allow a client app to pass in custom XML during migration
of a guest it is neccessary to ensure the guest ABI remains
unchanged. The virDomainDefCheckABIStablity method accepts
two virDomainDefPtr structs and compares everything in them
that could impact the guest machine ABI
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/libvirt_private.syms: Add virDomainDefCheckABIStablity
* src/conf/cpu_conf.c, src/conf/cpu_conf.h: Add virCPUDefIsEqual
* src/util/sysinfo.c, src/util/sysinfo.h: Add virSysinfoIsEqual
The virDomainHostdevDef struct contains a 'char *target'
field. This is set to 'NULL' when parsing XML and never
used / set anywhere else. Clearly it is bogus & unused
* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove
target from virDomainHostdevDef
This patch seperate the domain config loading just as qemu driver
does, first loading config of running or trasient domains, then
of persistent inactive domains. And only try to reconnect the
monitor of running domains, so that it won't always throws errors
saying can't connect to domain monitor.
And as "virDomainLoadConfig->virDomainAssignDef->virDomainObjAssignDef",
already do things like "vm->newDef = def", removed the codes
in "lxcReconnectVM" that does the same work.
Add support to set the maximum memory of the domain.
Also add support to change the memory of the current
state of the domain, which translates to a running
domain or the config of the domain.
Based on the code from the qemu driver.
v3:
* initialize xml pointer to avoid segfault
* throw error message if domain is paused as
libxenlight itself will pause it
v2:
* header is now padded and has a version field
* the correct restore function from libxl is used
* only create the restore event once in libxlVmStart
This patch fixes the population of the
libxenlight data structures. Now the devices
should be removed correctly from the xenstore
if they are detached.
Currently the QEMU monitor I/O handler code uses errno values
to report errors. This results in a sub-optimal error messages
on certain conditions, in particular when parsing JSON strings
malformed data simply results in 'EINVAL'.
This changes the code to use the standard libvirt error reporting
APIs. The virError is stored against the qemuMonitorPtr struct,
and when a monitor API is run, any existing stored error is copied
into that thread's error local
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Use
virError APIs for all monitor I/O handling code
Currently whenever there is any failure with parsing the monitor,
this is treated in the same was as end-of-file (ie QEMU quit).
The domain is terminated, if not already dead.
With this change, failures in parsing the monitor stream do not
result in the death of QEMU. The guest continues running unchanged,
but all further use of the monitor will be disabled.
The VMM_FAILURE event will be emitted, and the mgmt application
can decide when to kill/restart the guest to re-gain control
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Run a
different callback for monitor EOF vs error conditions.
* src/qemu/qemu_process.c: Emit VMM_FAILURE event when monitor
fails
This introduces a new domain
VIR_DOMAIN_EVENT_ID_CONTROL_ERROR
Which uses the existing generic callback
typedef void (*virConnectDomainEventGenericCallback)(virConnectPtr conn,
virDomainPtr dom,
void *opaque);
This event is intended to be emitted when there is a failure in
some part of the domain virtualization system. Whether the domain
continues to run/exist after the failure is an implementation
detail specific to the hypervisor.
The idea is that with some types of failure, hypervisors may
prefer to leave the domain running in a "degraded" mode of
operation. For example, if something goes wrong with the QEMU
monitor, it is possible to leave the guest OS running quite
happily. The mgmt app will simply loose the ability todo various
tasks. The mgmt app can then choose how/when to deal with the
failure that occured.
* daemon/remote.c: Dispatch of new event
* examples/domain-events/events-c/event-test.c: Demo catch
of event
* include/libvirt/libvirt.h.in: Define event ID and callback
* src/conf/domain_event.c, src/conf/domain_event.h: Internal
event handling
* src/remote/remote_driver.c: Receipt of new event from daemon
* src/remote/remote_protocol.x: Wire protocol for new event
* src/remote_protocol-structs: add new event for checks
Well, the remaining drivers that already had the get/set
scheduler parameter functionality to begin with.
For now, this blindly treats VIR_DOMAIN_SCHEDINFO_CURRENT as
the only supported operation for these 5 domains; it will
take domain-specific patches if more specific behavior is
preferred.
* src/esx/esx_driver.c (esxDomainGetSchedulerParameters)
(esxDomainSetSchedulerParameters): Move guts...
(esxDomainGetSchedulerParametersFlags)
(esxDomainSetSchedulerParametersFlags): ...to new functions.
* src/libxl/libxl_driver.c (libxlDomainGetSchedulerParameters)
(libxlDomainSetSchedulerParameters)
(libxlDomainGetSchedulerParametersFlags)
(libxlDomainSetSchedulerParametersFlags): Likewise.
* src/lxc/lxc_driver.c (lxcGetSchedulerParameters)
(lxcSetSchedulerParameters, lxcGetSchedulerParametersFlags)
(lxcSetSchedulerParametersFlags): Likewise.
* src/test/test_driver.c (testDomainGetSchedulerParams)
(testDomainSetSchedulerParams, testDomainGetSchedulerParamsFlags)
(testDomainSetSchedulerParamsFlags): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainGetSchedulerParameters)
(xenUnifiedDomainSetSchedulerParameters)
(xenUnifiedDomainGetSchedulerParametersFlags)
(xenUnifiedDomainSetSchedulerParametersFlags): Likewise.
* src/qemu/qemu_driver.c (qemuGetSchedulerParameters): Move
guts...
(qemuGetSchedulerParametersFlags): ...to new callback, and honor
flags more accurately.
If we can choose live or config when setting, then we need to
be able to choose which one we are querying.
Also, make the documentation clear that set must use a non-empty
subset (some of the hypervisors fail if params is NULL).
* include/libvirt/libvirt.h.in
(virDomainGetSchedulerParametersFlags): New prototype.
* src/libvirt.c (virDomainGetSchedulerParametersFlags): Implement
it.
* src/libvirt_public.syms: Export it.
* python/generator.py (skip_impl): Don't auto-generate.
* src/driver.h (virDrvDomainGetSchedulerParametersFlags): New
callback.
Apparently introdunced in commit 376e1d9420
the generator produces u_int flags not unsigned int flags.
* src/remote_protocol-structs: fix to the actual expected type and
alignment
This patch reorders the locks for the nwfilter updates and the access
the nwfilter objects. In the case that the IP address learning thread
was instantiating filters while an update happened, the previous order
lead to a deadlock.
It was suggested during review of a different patch that the libvirt
interface driver API's should have "netcf:" in their log
messages. This patch eliminates that from all interface driver API
functions, and also eliminates the extra " - " in the case that netcf
returns no details in its error info (which *never* happens at
present, but could happen sometime in the future.
This is the API agreed on in:
https://www.redhat.com/archives/libvir-list/2011-May/msg00026.html
(with a slight name change to use "...begin" rather than
"...start"). This implements transactional changes to the host network
config. When a transaction is begun with ncf_change_begin(), all other
netcf APIs will continue to work as they always have, but a snapshot
of the existing config will be taken, allowing reversion (rollback,
using ncf_change_rollback()) to the exact state of config at the time
ncf_change_begin() was called. Alternately, if it's determined that
the new changes are acceptable, ncf_change_commit() can be called,
which will eliminate the snapshot and make the changes permanent.
As a failsafe measure, if neither ncf_change_commit() or
ncf_change_rollback() is called by the next time the system reboots,
the netcf-transaction initscript will be automatically called to
rollback the changes.
Commit f044376530 replaced openvz_readline with getline and
changed EOF-handling in the openvzGetVPSUUID.
This patch restores original EOF-handling.
Reported by Jean-Baptiste Rouault.
This patch allows to modify interfaces of domain(qemu)
* src/conf/domain_conf.c src/conf/domain_conf.h src/libvirt_private.syms:
(virDomainNetInsert) : Insert a network device to domain definition.
(virDomainNetIndexByMac) : Returns an index of net device in array.
(virDomainNetRemoveByMac): Remove a NIC of passed MAC address.
* src/qemu/qemu_driver.c
(qemuDomainAttachDeviceConfig): add codes for NIC.
(qemuDomainDetachDeviceConfig): add codes for NIC.
Before commit 145d6cb05c (in August 2010) absolute file names
in VMX and domain XML configs were handled correctly. But this got
lost during the refactoring. The test cases didn't highlight this
problem because they have their own set of file name handling
functions. The actual ones require a real connection to an ESX
server. Also the test case functions always worked correctly.
Fix the regression and add a new in-the-wild VMX file that contains
such a problematic absolute path. Even though this test case won't
protect against new regressions.
Reported by lofic (IRC nick)
As reported by Diego Blanco in
https://bugzilla.redhat.com/show_bug.cgi?id=702602
commit f0443765 which replaced openvz_readline to getline(3)
broke OpenVZ driver as it changed semantics of EOF-handling
when parsing OpenVZ configuration.
There're several other issues reported with current OpenVZ driver:
#1: unclear error message when parsing "CPUS=" line
#2: openvz driver goes into crashing loop
#3: "NETIF=" line in configuration is not parsed correctly
#4: aborts even when optional parameter is missing
#5: there's a potential memory leak
This updated patch to fix #[145]. This patch does not fix #[23]
as I haven't verified these yet, but this at least got me to run
OpenVZ on libvirt once again.
Coverity spotted this off-by-one. Thankfully, no one in libvirt
was ever calling virAuditSend with an argument of 3.
* src/util/virtaudit.c (virAuditSend): Use correct comparison.
Originally most of libvirt domain-specific calls were blocking
during a migration.
A new mechanism to allow specific calls (blkstat/blkinfo) to be
executed in such condition has been implemented.
In the long term it'd be desirable to get a more general
solution to mark further APIs as migration safe, without needing
special case code.
* src/qemu/qemu_migration.c: add some additional job signal
flags for doing blkstat/blkinfo during a migration
* src/qemu/qemu_domain.c: add a condition variable that can be
used to efficiently wait for the migration code to clear the
signal flag
* src/qemu/qemu_driver.c: execute blkstat/blkinfo using the
job signal flags during migration
Based on the device attach/detach code from the QEMU driver,
but using the new functions to create the structures associated.
* src/libxl/libxl_driver.c: implements domainAttachDevice,
domainAttachDeviceFlags, domainDetachDevice, domainDetachDeviceFlags
and domainUpdateDeviceFlags
Create 3 new function refactored from previous list ones and
exports them internally to the driver
* src/libxl/libxl_conf.c src/libxl/libxl_conf.h: create libxlMakeDisk,
libxlMakeNic libxlMakeVfb out of the exsting static List functions
and exports them
When modifying the disk devices of a live domain and the domain
configuration, the function qemuDomainAttachDeviceConfig
first sets dev->data->disk to NULL. Later qemuDomainAttachDeviceLive
accesses dev->data.disk and causes a segfault.
* src/qemu/qemu_driver.c: fix qemuDomainModifyDeviceFlags() accordingly
Anything generated that must end up in the tarball must either
have unconditional rules for generation (remote_protocol.c) or
must live in libvirt.git for the case where the person running
'make dist' has disabled the configure options that control the
rebuild of the generated file (remote_protocol-structs).
* src/Makefile.am (remote_protocol-structs): Add a dependency and
document why it must live in git.
($(srcdir)/remote/%_protocol.c, $(srcdir)/remote/%_protocol.c):
Unconditionally generate.
http://lists.gnu.org/archive/html/qemu-devel/2011-05/threads.html#02162
Currently, qemu silently clips any JSON integer in the range
0x8000000000000000 - 0xffffffffffffffff (all numbers in this range
will be clipped to 0x7fffffffffffffff == LLONG_MAX).
To avoid this, pass these as signed 64 bit integers in the QMP
request.
In most cases this affects flags parameters that are unsigned in the
public and driver API but signed in the XDR protocol. Switch the
XDR protocol to unsigned for those.
A counterexample is virNWFilterGetXMLDesc. Its flags parameter is signed
in the public API and XDR protocol, but unsigned in the driver API.
virNodeGetFreeMemory used unsigned long long in the public API but
signed hyper in the XDR protocol. Convert the XDR protocol to use
unsigned hyper.
As explained by Eric before, this doesn't affect the on-the-wire protocol.
Several functions return values by reference parameters. This is realized
by passing the members of remote_CALL_ret by reference to the called
function.
The position of this parameters in the function signature follows some
patterns with some exceptions. This patterns and exceptions are hardcoded
in the generator.
Add an insert@<offset> annotation to the remote_CALL_ret struct members
for functions that return lists to remove some of the hardcoded patterns
and exceptions.
The current virDomainMigrateFinish3 method signature attempts to
distinguish two types of errors, by allowing return with ret== 0,
but ddomain == NULL, to indicate a failure to start the guest.
This is flawed, because when ret == 0, there is no way for the
virErrorPtr details to be sent back to the client.
Change the signature of virDomainMigrateFinish3 so it simply
returns a virDomainPtr, in the same way as virDomainMigrateFinish2
The disk locking code will protect against the only possible
failure mode this doesn't account for (loosing conenctivity to
libvirtd after Finish3 starts the CPUs, but before the client
sees the reply for Finish3).
* src/driver.h, src/libvirt.c, src/libvirt_internal.h: Change
virDomainMigrateFinish3 to return a virDomainPtr instead of int
* src/remote/remote_driver.c, src/remote/remote_protocol.x,
daemon/remote.c, src/qemu/qemu_driver.c, src/qemu/qemu_migration.c:
Update for API change
When doing migration, if an error occurs in Perform, it must not
be overwritten during Finish/Confirm steps. If an error occurs
in Finish, it must not be overwritten in Confirm.
Previous commit a9d12c2444 added
code to qemudDomainMigrateFinish2 to preserve the error. This
is not the right place, because it is not applicable in non-p2p
migration. The src/libvirt.c virDomainMigrateV2/3 methods need
code to preserve errors for non-p2p migration, while the
doPeer2PeerMigrate2 and doPeer2PeerMigrate3 methods contain
code to preverse errors for p2p migration.
Remove the bogus error preservation from qemudDomainMigrateFinish2
and qemudDomainMigrateFinish3.
Fix virDomainMigrateV3 and doPeer2PeerMigrate3 so that they
preserve any error hit during the Finish3 step, before invoking
Confirm3.
Finally if qemuMigrationFinish fails to resume the CPUs, it must
preserve the error before tearing down the VM, so that VM cleanup
doesn't overwrite it.
* src/libvirt.c: Preserve error before invoking Confirm3
* src/qemu/qemu_driver.c: Remove bogus error preservation
code in qemudDomainMigrateFinish2/qemudDomainMigrateFinish3
* src/qemu/qemu_migration.c: Preserve error before invoking Confirm3
and after resume fails in qemuMigrationFinish.
* src/libvirt.c: Add further debug lines in helper APIs for
migration
* src/qemu/qemu_migration.c: Add debug lines for all internal
migration API parameters
Even when failing to start CPUs, the finish method was returning
a success result. Fix this so that the QEMU process is killed
off when finish fails under v3 protocol. Also rename the
killOnFinish boolean to 'v3proto' to make it clearer that this
is a tunable based on the migration protocol version
* src/qemu/qemu_driver.c: Update for API change
* src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Kill
VM in qemuMigrationFinish if failing to start CPUs
The SPICE seamless migration process requires data to be passed
back from the target host, to the source host via a cookie.
The cookie includes the target host's hostname, but this was not
stored, merely validated. This patch explicitly records the
remote hostname after parsing the cookie, and uses it when
initiating the SPICE migration
* qemu/qemu_migration.c: Fix SPICE seamless migration hostname
Before running perform in peer-2-peer migration, the current
guest state must be recorded, so that non-live migration can
currently unpause a running guest on completion.
* src/qemu/qemu_migration.c: Move check for offline guest
to fix non-live migration
There are two pieces of information which are desirable for
migration, which cannot be supplied by applications
- The explicit QEMU migration URI, while using Peer2Peer
migration
- An override for the target VM XML
This introduces two new public APIs to support these extra
parameters. There is no need for extra wire protocool changes,
since this is supported by the v3 migration enhancements
* include/libvirt/libvirt.h.in,
src/libvirt.c, src/libvirt_public.syms: Add virDomainMigrate2
and virDomainMigrateToURI2
The virDomainMigratePerform3 currently has a single URI parameter
whose meaning varies. It is either
- A QEMU migration URI (normal migration)
- A libvirtd connection URI (peer2peer migration)
Unfortunately when using peer2peer migration, without also
using tunnelled migration, it is possible that both URIs are
required.
This adds a second URI parameter to the virDomainMigratePerform3
method, to cope with this scenario. Each parameter how has a fixed
meaning.
NB, there is no way to actually take advantage of this yet,
since virDomainMigrate/virDomainMigrateToURI do not have any
way to provide the 2 separate URIs
* daemon/remote.c, src/remote/remote_driver.c,
src/remote/remote_protocol.x, src/remote_protocol-structs: Add
the second URI parameter to perform3 message
* src/driver.h, src/libvirt.c, src/libvirt_internal.h: Add
the second URI parameter to Perform3 method
* src/libvirt_internal.h, src/qemu/qemu_migration.c,
src/qemu/qemu_migration.h: Update to handle URIs correctly
This extends the v3 migration protocol such that the
virDomainMigrateBegin3 and virDomainMigratePerform3
methods accept an application supplied XML config for
the target VM.
If the 'xmlin' parameter is NULL, then Begin3 uses the
current guest XML as normal. A driver implementing the
Begin3 method should either reject all non-NULL 'xmlin'
parameters, or strictly validate that the app supplied
XML does not change guest ABI.
The Perform3 method also needed the xmlin parameter to
cope with the Peer2Peer migration sequence.
NB it is not yet possible to use this capability since
neither of the public virDomainMigrate/virDomainMigrateToURI
methods have a way to pass in XML.
* daemon/remote.c, src/remote/remote_driver.c,
src/remote/remote_protocol.x, src/remote_protocol-structs:
Add 'remote_string xmlin' parameter to begin3/perform3
RPC messages
* src/libvirt.c, src/driver.h, src/libvirt_internal.h: Add
'const char *xmlin' parameter to Begin3/Perform3 methods
* src/qemu/qemu_driver.c, src/qemu/qemu_migration.c,
src/qemu/qemu_migration.h: Pass xmlin parameter around
migration methods
Otherwise an attempt to use virConnectOpen or virConnectOpenAuth without
auth pointer results in the driver declining the URI and libvirt falling
back to the remote driver for an esx:// URI.
The cur_vcpus member of struct libxl_domain_build_info was incorrectly
initialized to the number of vcpus, when it should have been interpreted
as a bitmap, where bit X corresponds to online/offline status of vcpuX.
To complicate matters, cur_vcpus is an int, so only 32 vcpus can be
set online. Add a check to ensure vcpus does not exceed this limit.
V2: Eric Blake noted a compilation pitfal when '1 << 32' on an int.
Account for vcpus == 32.
We don't use the gnulib vsnprintf replacement, which means that
on mingw, vsnprintf doesn't support %zn or %lln.
And as it turns out, VIR_GET_VAR_STR was a rather inefficient
reimplementation of virVasprintf logic.
* src/util/logging.c (VIR_GET_VAR_STR): Drop.
(virLogMessage): Inline a simpler version here.
* src/util/virterror.c (VIR_GET_VAR_STR, virRaiseErrorFull):
Likewise.
Reported by Matthias Bolte.
Saving domain to previously created file changes also its ownership.
This is certainly not what users want if some conditions are met:
it is a regular, local file and dynamic_ownership is off.
NB: the enum that uses the string vnet-host (now changed to vhost-net)
is used in XML, but fortunately that hasn't been in an official
release yet, so it can still be fixed.
Since -vnc uses ':' to separate the address from the port, raw
IPv6 addresses need to be escaped like [addr]:port
* src/qemu/qemu_command.c: Escape raw IPv6 addresses with []
* tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.args,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.xml: Tweak
to test Ipv6 escaping
* docs/schemas/domain.rng: Allow Ipv6 addresses, or hostnames
in <graphics> listen attributes
The qemuMigrationConfirm method shouldn't deal with final VM
cleanup, since it can be called from the peer2peer migration,
which expects to still use the 'vm' object afterwards.
Push the cleanup code out of qemuMigrationConfirm, into its
caller, qemuDomainMigrateConfirm3
* src/qemu/qemu_driver.c: Add VM cleanup code to
qemuDomainMigrateConfirm3
* src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Remove
job handling cleanup from qemuMigrationConfirm
To allow new mandatory migration cookie data to be introduced,
add support for checking supported feature flags when parsing
migration cookie.
* src/qemu/qemu_migration.c: Feature flag checking in migration
cookie parsing
Two additional places need initgroups call to properly work in an
environment where the UID is allowed to open/create stuff through its
supplementary groups.
This adds a streaming-video=filter|all|off attribute. It is used to change
the behavior of video stream detection in spice, the default is filter (the
default for libvirt is not to specify it - the actual default is defined in
libspice-server.so).
Usage:
<graphics type='spice' autoport='yes'>
<streaming mode='off'/>
</graphics>
Tested with the above and with tests/qemuxml2argvtest.
Signed-off-by: Alon Levy <alevy@redhat.com>
This patch enables filtering of gratuitous ARP packets using the following XML:
<rule action='accept' direction='in' priority='425'>
<arp gratuitous='true'/>
</rule>
This was discussed in:
https://www.redhat.com/archives/libvir-list/2011-May/msg01370.html
The capabilities code only sets the flag to allow use of vhost-net if
kvm is detected (set if the help string contains "(qemu-kvm-" or
"(kvm-"), but actually vhost-net is available in some qemu builds that
don't have kvm in their name, so just checking for ",vhost=" is enough.
When using TLS authentication and operating as the non-root user,
initially attempt to use that specific user's TLS certificates before
attempting to use the system wide TLS certificates.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Otherwise qemu is unable to write to it, with the error:
libvir: QEMU error : internal error unable to execute QEMU command 'memsave': Could not open '/var/cache/libvirt/qemu/qemu.mem.RRNvLv'
The v2 migration protocol had a limit on cookie length that was
too small to be useful for QEMU. Avoid generating cookies with
v2 protocol, so that old libvirtd can still reliably migrate a
guest to new libvirtd uses v2 protocol.
* src/qemu/qemu_driver.c: Avoid migration cookies with v2
migration
When generating a cookie for a guest with no data, the
QEMU_MIGRATION_COOKIE_GRAPHICS flag was set even if no
graphics data was added. Avoid setting the flag unless
it was needed, also add a safety check for mig->graphics
being non-NULL
* src/qemu/qemu_migration.c: Avoid cookie crash for guest
with no graphics
The internal virDomainMigratePeer2Peer and virDomainMigrateDirect
helper methods were not checking whether the target supports the
v3 migration protocol.
* src/libvirt.c: Use v3 migration protocol for p2p/direct
migration if available.
Some bogus apps are generating a VNC/SPICE/RFB listen attribute
with no content. This then causes a failure with the graphics
migration cookie parsing. Blank out the 'listenAddr' parameter
after parsing domain XML if it is the empty string, so the host
default takes over
* src/qemu/qemu_migration.c: Blank out listenAddr parameter
if empty
The on-the-wire protocol is identical; XDR guarantees that
both 'hyper' and 'unsigned hyper' are transmitted as 8 bytes.
* src/remote/remote_protocol.x (remote_get_version_ret)
(remote_get_lib_version_ret): Match public API.
* daemon/remote_generator.pl: Drop special case.
* src/remote_protocol-structs: Reflect updated type.
Clang couldn't quite see that the same condition of
(flags & VIR_DOMAIN_MEM_CONFIG) is used twice, such that
the second block is guaranteed that def was assigned in
the first block.
* src/libxl/libxl_driver.c (libxlDomainSetMemoryFlags): Add a hint
for clang.
Improve invalid argument checks in the size query case. The drivers already
relied on this unchecked behavior.
Relax the implementation of virDomainGet(Memory|Blkio)MemoryParameters
in the drivers and allow to pass more memory than necessary for all
parameters.
Add invalid argument checks for params and nparams to the public API
and remove them from the drivers (e.g. xend).
Add subset handling to libxl and test drivers.
params and nparams are essential and cannot be NULL. Check this in
libvirt.c and remove redundant checks from the drivers (e.g. xend).
Instead of enforcing that nparams must point to exact same value as
returned by virDomainGetSchedulerType relax this to a lower bound
check. This is what some drivers (e.g. xen hypervisor and esx)
already did. Other drivers (e.g. xend) didn't check nparams at all
and assumed that there is enough space in params.
Unify the behavior in all drivers to a lower bound check and update
nparams to the number of valid values in params on success.
Some drivers assumed it can be NULL (e.g. qemu and lxc) and check it
before assigning to it, other drivers assumed it must be non-NULL
(e.g. test and esx) and just assigned to it.
Unify this to nparams being optional and document it.
This error code has existed since the dawn of time, yet the messages it
generates are almost universally busted. Here's a small sampling:
src/conf/domain_conf.c:4889 : XML description for missing root element is not well formed or invalid
src/conf/domain_conf.c:4951 : XML description for unknown device type is not well formed or invalid
src/conf/domain_conf.c:5460 : XML description for maximum vcpus must be an integer is not well formed or invalid
src/conf/domain_conf.c:5468 : XML description for invalid maxvcpus %(count)lu is not well formed or invalid
Fix up the error code to instead be
XML error: <msg>
Adjust the few locations that were using the original correctly (or shouldn't
have been using the error code at all).
v2:
Fix wording of error code without a passed argument
starting with kernel 2.6.38 macvtap supports a 'passthru' mode for
attaching virtual functions of a SRIOV capable network card directly to a VM.
This patch adds the capability to configure such a device.
Signed-off-by: Dirk Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
<sys/syslimits.h> is not standardized, so portable programs should
not need to rely on it. If there really is something that we need
where <sys/syslimits.h> provided the limit but <limits.h> did not,
then that would be a candidate for fixing in gnulib. But this patch
did not turn up any compilation failures on Linux.
* src/internal.h (includes): Drop unused header.
* daemon/libvirtd.h (includes): Likewise.
* configure.ac (AC_CHECK_HEADERS): Likewise.
Based on a report by Matthias Bolte.
POSIX allows sysconf(_SC_GETPW_R_SIZE_MAX) to return -1 if there
is no fixed limit, and requires ERANGE errors to track real size.
Model our behavior after the example in POSIX itself:
http://pubs.opengroup.org/onlinepubs/9699919799/functions/getpwuid_r.html
Also, on error for get*_r functions, errno is undefined, and the
real error was the return value.
* src/util/util.c (virGetUserEnt, virGetUserID, virGetGroupID)
(virSetUIDGID): Cope with sysconf failure or too small buffer.
Reported by Matthias Bolte.
virRunWithHook is now unused, so we can drop it. Tested w/ raw + qcow2
volume creation and copying.
v2:
Use opaque data to skip hook second time around
Simply command building
v3:
Drop explicit FindFileInPath
virStreamNew needs to dispatch the error that virGetStream reports
on failure.
remoteCreateClientStream can fail due to virStreamNew or due to
VIR_ALLOC. Report OOM error for VIR_ALLOC failure to report errors
in all error cases.
Remove OOM error reporting from remoteCreateClientStream callers.
When the session has expired then multiple threads can race while
reestablishing it.
This race condition is not that critical as it requires a special usage
pattern to be triggered. It can only happen when an application doesn't
do API calls for quite some time (the session expires after 30 min
inactivity) and then multiple threads doing simultaneous API calls and
end up doing simultaneous calls to esxVI_EnsureSession.
virsh didn't call virInitialize(), which (among other things)
initializes virLastErr thread local variable. As a result of that, virsh
could just segfault in virEventRegisterDefaultImpl() since that is the
first call that touches (resets) virLastErr.
I have no idea what lucky coincidence made this bug visible but I was
able to reproduce it in 100% cases but only in one specific environment
which included building in sandbox.
Mingw execve() has a broken signature. Disable this
function until gnulib fixes the signature, since we
don't really need this on Win32 anyway.
* src/util/command.c: Disable virCommandExec on Win32
When failing to marshall an XDR message, include the
full program/version/status/proc/type info, to allow
easier debugging & diagnosis of the problem.
* src/remote/remote_driver.c: Improve error when marshalling
fails
By running the doTunnelSendAll code in a separate thread, the
main thread can do qemuMigrationWaitForCompletion as with
normal migration. This in turn ensures that job signals work
correctly and that progress monitoring can be done
* src/qemu/qemu_migration.c: Run tunnelled migration in
separate thread
Cancelling the QEMU migration may cause QEMU to flush pending
data on the migration socket. This may in turn block QEMU if
nothing reads from the other end of the socket. Closing the
socket before cancelling QEMU migration avoids this possible
deadlock.
* src/qemu/qemu_migration.c: Close sockets before cancelling
migration on failure
The 'nbytes' variable was not re-initialized to the
buffer size on each iteration of the tunnelled migration
loop. While saferead() will ensure a full read, except
on EOF, it is clearer to use the real buffer size
* src/qemu/qemu_migration.c: Always read full buffer of data
The qemuMigrationWaitForCompletion method contains a loop which
repeatedly queries QEMU to check migration progress, and also
processes job signals (pause, setspeed, setbandwidth, cancel).
The tunnelled migration loop does not currently support this
functionality, but should. Refactor the code to allow it to
be used with tunnelled migration.
Implement the v3 migration protocol, which has two extra
steps, 'begin' on the source host and 'confirm' on the
source host. All other methods also gain both input and
output cookies to allow bi-directional data passing at
all stages.
The QEMU peer2peer migration method gains another impl
to provide the v3 migration. This finally allows migration
cookies to work with tunnelled migration, which is required
for Spice seamless migration & the lock manager transfer
* src/qemu/qemu_driver.c: Wire up migrate v3 APIs
* src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Add
begin & confirm methods, and peer2peer impl of v3
Merge the doNonTunnelMigrate2 and doTunnelMigrate2 methods
into one doPeer2PeerMigrate2 method, since they are substantially
the same. With the introduction of v3 migration, this will be
even more important, to avoid massive code duplication.
* src/qemu/qemu_migration.c: Merge tunnel & non-tunnel migration
The v2 migration protocol was accidentally missing out the
finish step, when prepare succeeded, but returned an invalid
URI
* src/libvirt.c: Teardown VM if prepare returns invalid URI
To facilitate the introduction of the v3 migration protocol,
the doTunnelMigrate method is refactored into two pieces. One
piece is intended to mirror the flow of virDomainMigrateVersion2,
while the other is the helper for setting up sockets and processing
the data.
Previously socket setup would be done before the 'prepare' step,
so errors could be dealt with immediately, avoiding need to shut
off the destination QEMU. In the new split, socket setup is done
after the 'prepare' step. This is not a serious problem, since
the control flow already requires calling 'finish' to tear down
the destination QEMU upon several errors.
* src/qemu/qemu_migration.c:
Use the graphics information from the QEMU migration cookie to
issue a 'client_migrate_info' monitor command to QEMU. This causes
the SPICE client to automatically reconnect to the target host
when migration completes
* src/qemu/qemu_migration.c: Set data for SPICE client relocation
before starting migration on src
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
new qemuMonitorGraphicsRelocate() command
Extend the QEMU migration cookie structure to allow information
about the destination host graphics setup to be passed by to
the source host. This will enable seamless migration of any
connected graphics clients
* src/qemu/qemu_migration.c: Add graphics info to migration
cookies
* daemon/libvirtd.c: Always initialize gnutls to enable
x509 cert parsing in QEMU
The migration protocol has support for a 'cookie' parameter which
is an opaque array of bytes as far as libvirt is concerned. Drivers
may use this for passing around arbitrary extra data they might
need during migration. The QEMU driver needs to do a few things:
- Pass hostname/uuid to allow strict protection against localhost
migration attempts
- Pass SPICE/VNC server port from the target back to the source to
allow seamless relocation of client sessions
- Pass lock driver state from source to destination
This patch introduces the basic glue for handling cookies
but only includes the host/guest UUID & name.
* src/libvirt_private.syms: Export virXMLParseStrHelper
* src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Parsing
and formatting of migration cookies
* src/qemu/qemu_driver.c: Pass in cookie parameters where possible
* src/remote/remote_protocol.h, src/remote/remote_protocol.x: Change
cookie max length to 16384 bytes
The qemuMigrationPrepareTunnel method should not unlock the
qemu driver, since that is the caller's job.
* src/qemu/qemu_migration.c: Fix qemuMigrationPrepareTunnel
unlocking of QEMU driver
Migration just seems to go from bad to worse. We already had to
introduce a second migration protocol when adding the QEMU driver,
since the one from Xen was insufficiently flexible to cope with
passing the data the QEMU driver required.
It turns out that this protocol still has some flaws that we
need to address. The current sequence is
* Src: DumpXML
- Generate XML to pass to dst
* Dst: Prepare
- Get ready to accept incoming VM
- Generate optional cookie to pass to src
* Src: Perform
- Start migration and wait for send completion
- Kill off VM if successful, resume if failed
* Dst: Finish
- Wait for recv completion and check status
- Kill off VM if unsuccessful
The problems with this are:
- Since the first step is a generic 'DumpXML' call, we can't
add in other migration specific data. eg, we can't include
any VM lease data from lock manager plugins
- Since the first step is a generic 'DumpXML' call, we can't
emit any 'migration begin' event on the source, or have
any hook that runs right at the start of the process
- Since there is no final step on the source, if the Finish
method fails to receive all migration data & has to kill
the VM, then there's no way to resume the original VM
on the source
This patch attempts to introduce a version 3 that uses the
improved 5 step sequence
* Src: Begin
- Generate XML to pass to dst
- Generate optional cookie to pass to dst
* Dst: Prepare
- Get ready to accept incoming VM
- Generate optional cookie to pass to src
* Src: Perform
- Start migration and wait for send completion
- Generate optional cookie to pass to dst
* Dst: Finish
- Wait for recv completion and check status
- Kill off VM if failed, resume if success
- Generate optional cookie to pass to src
* Src: Confirm
- Kill off VM if success, resume if failed
The API is designed to allow both input and output cookies
in all methods where applicable. This lets us pass around
arbitrary extra driver specific data between src & dst during
migration. Combined with the extra 'Begin' method this lets
us pass lease information from source to dst at the start of
migration
Moving the killing of the source VM out of Perform and
into Confirm, means we can now recover if the dst host
can't successfully Finish receiving migration data.
Change all the driver struct initializers to use the
C99 style, leaving out unused fields. This will make
it possible to add new APIs without changing every
driver. eg change:
qemudDomainResume, /* domainResume */
qemudDomainShutdown, /* domainShutdown */
NULL, /* domainReboot */
qemudDomainDestroy, /* domainDestroy */
to
.domainResume = qemudDomainResume,
.domainShutdown = qemudDomainShutdown,
.domainDestroy = qemudDomainDestroy,
And get rid of any existing C99 style initializersr which
set NULL, eg change
.listPools = vboxStorageListPools,
.numOfDefinedPools = NULL,
.listDefinedPools = NULL,
.findPoolSources = NULL,
.poolLookupByName = vboxStoragePoolLookupByName,
to
.listPools = vboxStorageListPools,
.poolLookupByName = vboxStoragePoolLookupByName,
Fix some driver names:
s/virDrvCPUCompare/virDrvCompareCPU/
s/virDrvCPUBaseline/virDrvBaselineCPU/
s/virDrvQemuDomainMonitorCommand/virDrvDomainQemuMonitorCommand/
s/virDrvSecretNumOfSecrets/virDrvNumOfSecrets/
s/virDrvSecretListSecrets/virDrvListSecrets/
And some driver struct field names:
s/getFreeMemory/nodeGetFreeMemory/
Only in drivers which use virDomainObj, drivers that query hypervisor
for domain status need to be updated separately in case their hypervisor
supports this functionality.
The reason is also saved into domain state XML so if a domain is not
running (i.e., no state XML exists) the reason will be lost by libvirtd
restart. I think this is an acceptable limitation.
This has been present since the introduction of phypAttachDevice
in commit 444fd07a.
* src/phyp/phyp_driver.c (phypAttachDevice): Don't dereference
NULL.
virFDStreamClose used a mutex after it was freed, and failed
to destroy that mutex on its last use.
* src/fdstream.c (virFDStreamFree): Inline into sole caller...
(virFDStreamClose): ...to avoid use-after-free and leak.
Reported by Matthias Bolte.
Several vSphere API methods are called on global objects like the
FileManager, the PerformanceManager or the SearchIndex. The generator
input file allows to mark such methods and the generator generates
such method in a way that automatically handles marked parameter. This
is done by some special macros. Those were manually written and this
patch moves them to the generator.
One functionality change here is that we no longer force enable the event
timeout for every queued event, only enable it for the first event after
the queue has been flushed. This is how other drivers have already done it,
and I haven't encountered problems in practice.
v3:
Adjust for new virDomainEventStateNew argument
The same code for queueing, flushing, and deregistering events exists
in multiple drivers, which will soon use these common functions.
v2:
Adjust libvirt_private.syms
isDispatching bool fixes
NONNULL tagging
v3:
Add requireTimer parameter to virDomainEventStateNew
This structure will be used to unify lots of duplicated event handling code
across the state drivers.
v2:
Check for state == NULL in StateFree
Add NONNULL tagging
Use bool for isDispatching
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Use capabilities to allow a driver to register a default <init> if none
is specified in the XML. Openvz was already open-coding this to be /sbin/init
LXC currently falls over if no init is specified, so an explicit error is
an improvement IMO.
(Side note: I don't think we can set a default value for LXC. If we use
/sbin/init but the user doesn't specify a separate root FS for their guest,
the container will rerun the host's init which can be traumatic :). For
virt-install I'm thinking of defaulting to /sbin/init if a root FS has
been specified, otherwise require the user to manually specify <init>)
This is needed if we want to transfer a temporary file. If the
transfer is done with iohelper, we might run into a race condition,
where we unlink() file before iohelper is executed.
* src/fdstream.c, src/fdstream.h,
src/util/iohelper.c: Add new option
* src/lxc/lxc_driver.c, src/qemu/qemu_driver.c,
src/storage/storage_driver.c, src/uml/uml_driver.c,
src/xen/xen_driver.c: Expand existing function calls
Add public API for taking screenshots of current domain console.
* include/libvirt/libvirt.h.in: add virDomainScreenshot
* src/libvirt_public.syms: Export new symbol
The public API and RPC over-the-wire format have no flags argument,
so neither should the internal callback API. This simplifies the
RPC generator.
* src/driver.h (virDrvNWFilterDefineXML): Drop argument that does
not match public API.
* src/nwfilter/nwfilter_driver.c (nwfilterDefine): Likewise.
* src/libvirt.c (virNWFilterDefineXML): Likewise.
* daemon/remote_generator.pl: Drop special case.
We were 31/73 on whether to translate; since less than 50% translated
and since VIR_INFO is less than VIR_WARN which also doesn't translate,
this makes sense.
* cfg.mk (sc_prohibit_gettext_markup): Add VIR_INFO, since it
falls between WARN and DEBUG.
* daemon/libvirtd.c (qemudDispatchSignalEvent, remoteCheckAccess)
(qemudDispatchServer): Adjust offenders.
* daemon/remote.c (remoteDispatchAuthPolkit): Likewise.
* src/network/bridge_driver.c (networkReloadIptablesRules)
(networkStartNetworkDaemon, networkShutdownNetworkDaemon)
(networkCreate, networkDefine, networkUndefine): Likewise.
* src/qemu/qemu_driver.c (qemudDomainDefine)
(qemudDomainUndefine): Likewise.
* src/storage/storage_driver.c (storagePoolCreate)
(storagePoolDefine, storagePoolUndefine, storagePoolStart)
(storagePoolDestroy, storagePoolDelete, storageVolumeCreateXML)
(storageVolumeCreateXMLFrom, storageVolumeDelete): Likewise.
* src/util/bridge.c (brProbeVnetHdr): Likewise.
* po/POTFILES.in: Drop src/util/bridge.c.
This one's tricker than the VIR_DEBUG0() removal, but the end
result is still C99 compliant, and reasonable with enough comments.
* src/libvirt.c (VIR_ARG10, VIR_HAS_COMMA)
(VIR_DOMAIN_DEBUG_EXPAND, VIR_DOMAIN_DEBUG_PASTE): New macros.
(VIR_DOMAIN_DEBUG): Rewrite to handle one argument, moving
multi-argument guts to...
(VIR_DOMAIN_DEBUG_1): New macro.
(VIR_DOMAIN_DEBUG0): Rename to VIR_DOMAIN_DEBUG_0.
Use of ',##__VA_ARGS__' is a gcc extension not guaranteed by
C99; thankfully, we can avoid it by lumping the format argument
into the var-args set.
* src/util/logging.h (VIR_DEBUG_INT, VIR_INFO_INT, VIR_WARN_INT)
(VIR_ERROR_INT, VIR_DEBUG, VIR_INFO, VIR_WARN, VIR_ERROR): Stick
to C99 var-arg macro syntax.
* examples/domain-events/events-c/event-test.c (VIR_DEBUG):
Simplify.
These VIR_XXXX0 APIs make us confused, use the non-0-suffix APIs instead.
How do these coversions works? The magic is using the gcc extension of ##.
When __VA_ARGS__ is empty, "##" will swallow the "," in "fmt," to
avoid compile error.
example: origin after CPP
high_level_api("%d", a_int) low_level_api("%d", a_int)
high_level_api("a string") low_level_api("a string")
About 400 conversions.
8 special conversions:
VIR_XXXX0("") -> VIR_XXXX("msg") (avoid empty format) 2 conversions
VIR_XXXX0(string_literal_with_%) -> VIR_XXXX(%->%%) 0 conversions
VIR_XXXX0(non_string_literal) -> VIR_XXXX("%s", non_string_literal)
(for security) 6 conversions
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
If we plow on after udev_device_get_syspath fails, we will hit a NULL
dereference. Clang found one due to strdup later in udevSetParent,
but in fact we hit a NULL dereference sooner because of the use of
STREQ within virNodeDeviceFindBySysfsPath.
* src/conf/node_device_conf.h (virNodeDeviceFindBySysfsPath): Mark
path argument non-null.
* src/node_device/node_device_udev.c (udevSetParent): Avoid null
dereference.
No syntactic effect; this merely silences some clang warnings.
* src/libxl/libxl_driver.c (libxlDomainSetVcpusFlags): Drop
redundant ret=0 statement.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextDriveDel):
Likewise.
Introduce a virProcessKill function that can be safely called
even when the job mutex is held. This allows virDomainDestroy
to kill any VM even if it is asleep in a monitor job. The PID
will die and the thread asleep on the monitor will then wake
up releasing the job mutex.
* src/qemu/qemu_driver.c: Kill process before using qemuProcessStop
to ensure job is released
* src/qemu/qemu_process.c: Add virProcessKill for killing off
QEMU processes
Version 2.0.0 or yajl changed API. It is fairly trivial for us to
cope with both APIs in libvirt, so adapt.
* configure.ac: Probe for yajl2 API
* src/util/json.c: Conditional support for yajl2 API
libxl accepts hpet configuration in its domain info struct. Parse the
domain definition's <clock> element in order to set the value.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Apologies from Eric Blake, for mistakenly committing the broken
intermediate version.
libxl accepts hpet configuration in its domain info struct. Parse the
domain definition's <clock> element in order to set the value.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recent versions of Xen disable the virtual HPET by default. This is
usually more precise because tick policies are not implemented for
the HPET in Xen. However, there may be several reasons to control
the HPET manually: 1) to test the emulation; 2) because distros may
provide the knob while leaving the default to "enabled" for compatibility
reasons.
This patch provides support for the hpet item in both sexpr and xm
formats, and translates it to a <timer> element.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow the CA certificate to come from the user's home directory or from
the global location independently of the client certificate/key pair.
Mostly for the case when each user on a system has their own cert/key
pair but the system as a whole shares the same CA.
Signed-off-by: Doug Goldstein <cardoe@gentoo.org>
This matches the public API and helps to get rid of some special
case code in the remote generator.
Rename driver API functions and XDR protocol structs.
No functional change included outside of the remote generator.
