Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Instead of creating an empty object and then setting keys one
at a time, it is possible to pass a dict object to
configuration_data(). This is nicer because it doesn't require
repeating the name of the cfg_data object over and over.
There is one exception: the 'conf' object, where we store values
that are used directly by C code. In that case, using a dict
object is not feasible for two reasons: first of all, replacing
the set_quoted() calls would result in awkward code with a lot
of calls to format(); moreover, since code that modifies it is
sprinkled all over the place, refactoring it would probably
make things more complicated rather than simpler.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Currently translated at 22.9% (2389 of 10404 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/fi/
Co-authored-by: Jan Kuparinen <copper_fin@hotmail.com>
Signed-off-by: Jan Kuparinen <copper_fin@hotmail.com>
'cmdEvent' along with all the helper functions it needs is ~950 LOC.
Move it out from virsh-domain.c to virsh-domain-event.c along with the
completer function so that the new module doesn't have to expose any new
types.
Semantically this creates a new category in 'virsh help' but all other
behaviour stays the same.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Currently translated at 22.9% (2396 of 10455 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/fi/
Co-authored-by: Jan Kuparinen <copper_fin@hotmail.com>
Signed-off-by: Jan Kuparinen <copper_fin@hotmail.com>
Currently translated at 22.4% (2345 of 10455 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/pl/
Co-authored-by: Piotr Drąg <piotrdrag@gmail.com>
Signed-off-by: Piotr Drąg <piotrdrag@gmail.com>
The existing helpers we have are very clumsy and there's no integration
with the monitor.
This patch introduces new helpers to bridge the gap and simplify handing
of fdsets and classic FD passing when generating commandline/hotplug
arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently translated at 22.8% (2392 of 10455 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/fi/
Co-authored-by: Jan Kuparinen <copper_fin@hotmail.com>
Signed-off-by: Jan Kuparinen <copper_fin@hotmail.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Currently translated at 22.4% (2347 of 10441 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/pl/
Co-authored-by: Piotr Drąg <piotrdrag@gmail.com>
Signed-off-by: Piotr Drąg <piotrdrag@gmail.com>
With this program we do not have to depend on the output of `certtool -i`, which
changed the order of the fields at some point and the newest version is
incompatible with what libvirt expects in tls_allowed_dn_list configuration
option.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Currently translated at 22.9% (2397 of 10441 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/fi/
Co-authored-by: Jan Kuparinen <copper_fin@hotmail.com>
Signed-off-by: Jan Kuparinen <copper_fin@hotmail.com>
Currently translated at 22.8% (2385 of 10441 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/fi/
Co-authored-by: Jan Kuparinen <copper_fin@hotmail.com>
Signed-off-by: Jan Kuparinen <copper_fin@hotmail.com>
Currently translated at 22.3% (2335 of 10441 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/pl/
Co-authored-by: Piotr Drąg <piotrdrag@gmail.com>
Signed-off-by: Piotr Drąg <piotrdrag@gmail.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Add support for deserializing the binary PCI/PCIe VPD format and storing
results in memory.
The VPD format is specified in "I.3. VPD Definitions" in PCI specs
(2.2+) and "6.28.1 VPD Format" PCIe 4.0. As section 6.28 in PCIe 4.0
notes, the PCI Local Bus and PCIe VPD formats are binary compatible
and PCIe 4.0 merely started incorporating what was already present in
PCI specs.
Linux kernel exposes a binary blob in the VPD format via sysfs since
v2.6.26 (commit 94e6108803469a37ee1e3c92dafdd1d59298602f) which requires
a parser to interpret.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
Currently translated at 23.0% (2387 of 10374 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/fi/
Co-authored-by: Jan Kuparinen <copper_fin@hotmail.com>
Signed-off-by: Jan Kuparinen <copper_fin@hotmail.com>
Currently translated at 22.6% (2345 of 10374 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/pl/
Co-authored-by: Piotr Drąg <piotrdrag@gmail.com>
Signed-off-by: Piotr Drąg <piotrdrag@gmail.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Currently translated at 100.0% (10353 of 10353 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/ko/
Co-authored-by: jason lee <ppark5237@gmail.com>
Signed-off-by: jason lee <ppark5237@gmail.com>
Currently translated at 79.3% (8219 of 10353 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/ko/
Co-authored-by: jason lee <ppark5237@gmail.com>
Signed-off-by: jason lee <ppark5237@gmail.com>
Currently translated at 78.5% (8130 of 10353 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/ko/
Co-authored-by: jason lee <ppark5237@gmail.com>
Signed-off-by: jason lee <ppark5237@gmail.com>
Currently translated at 78.1% (8095 of 10353 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/ko/
Co-authored-by: jason lee <ppark5237@gmail.com>
Signed-off-by: jason lee <ppark5237@gmail.com>
Currently translated at 73.2% (7583 of 10353 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/ko/
Co-authored-by: jason lee <ppark5237@gmail.com>
Signed-off-by: jason lee <ppark5237@gmail.com>
Currently translated at 49.4% (5118 of 10353 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/ko/
Co-authored-by: jason lee <ppark5237@gmail.com>
Signed-off-by: jason lee <ppark5237@gmail.com>
Currently translated at 47.7% (4943 of 10353 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/ko/
Co-authored-by: jason lee <ppark5237@gmail.com>
Signed-off-by: jason lee <ppark5237@gmail.com>
Currently translated at 46.9% (4865 of 10353 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/ko/
Co-authored-by: jason lee <ppark5237@gmail.com>
Signed-off-by: jason lee <ppark5237@gmail.com>
Currently translated at 46.1% (4781 of 10353 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/ko/
Co-authored-by: jason lee <ppark5237@gmail.com>
Signed-off-by: jason lee <ppark5237@gmail.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Currently translated at 22.6% (2344 of 10349 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/fi/
Co-authored-by: Jan Kuparinen <copper_fin@hotmail.com>
Signed-off-by: Jan Kuparinen <copper_fin@hotmail.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Currently translated at 49.6% (5132 of 10342 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/de/
Co-authored-by: Christian Kirbach <christian.kirbach@gmail.com>
Signed-off-by: Christian Kirbach <christian.kirbach@gmail.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Cloud-Hypervisor is a KVM virtualization using hypervisor. It
functions similarly to qemu and the libvirt Cloud-Hypervisor driver
uses a very similar structure to the libvirt driver.
The biggest difference from the libvirt perspective is that the
"monitor" socket is seperated into two sockets one that commands are
issued to and one that events are notified from. The current
implementation only uses the command socket (running over a REST API
with json encoded data) with future changes to add support for the
event socket (to better handle shutdowns from inside the VM).
This patch adds support for the following initial VM actions using the
Cloud-Hypervsior API:
* vm.create
* vm.delete
* vm.boot
* vm.shutdown
* vm.reboot
* vm.pause
* vm.resume
To use the Cloud-Hypervisor driver, the v15.0 release of
Cloud-Hypervisor is required to be installed.
Some additional notes:
* The curl handle is persistent but not useful to detect ch process
shutdown/crash (a future patch will address this shortcoming)
* On a 64-bit host Cloud-Hypervisor needs to support PVH and so can
emulate 32-bit mode but it isn't fully tested (a 64-bit kernel and
32-bit userspace is fine, a 32-bit kernel isn't validated)
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
Currently translated at 20.9% (2158 of 10314 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/fi/
Co-authored-by: Jan Kuparinen <copper_fin@hotmail.com>
Signed-off-by: Jan Kuparinen <copper_fin@hotmail.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Currently translated at 20.3% (2154 of 10581 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/fi/
Co-authored-by: Jan Kuparinen <copper_fin@hotmail.com>
Signed-off-by: Jan Kuparinen <copper_fin@hotmail.com>
Currently translated at 33.8% (3577 of 10581 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/ko/
Co-authored-by: SeongHyun Jo <caelus9536@gmail.com>
Signed-off-by: SeongHyun Jo <caelus9536@gmail.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Implement "<os firmware='efi'>" support for bhyve driver.
As there are not really lot of options, try to find
"BHYVE_UEFI.fd" firmware which is installed by the
sysutils/uefi-edk2-bhyve FreeBSD port.
If not found, just use the first found firmware
in the firmwares directory (which is configurable via
config file).
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Currently translated at 13.5% (1415 of 10451 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/fi/
Co-authored-by: Jan Kuparinen <copper_fin@hotmail.com>
Signed-off-by: Jan Kuparinen <copper_fin@hotmail.com>
Currently translated at 13.4% (1404 of 10451 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/fi/
Co-authored-by: Jan Kuparinen <copper_fin@hotmail.com>
Signed-off-by: Jan Kuparinen <copper_fin@hotmail.com>
Currently translated at 13.0% (1366 of 10451 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/fi/
Co-authored-by: Jan Kuparinen <copper_fin@hotmail.com>
Signed-off-by: Jan Kuparinen <copper_fin@hotmail.com>
The parsers for the backing store strings are relatively self-contained
and rather massive piece of code. Move them to a new module called
storage_source_backingstore.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The code handles XML bits and internal definition and should be
in conf directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The code handles XML bits and internal definition and should be
in conf directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Same as virStorageFileBackend, it doesn't belong into util directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
It's used only by storage file code so it doesn't make sense to have
it in util directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Up until now we had a runtime code and XML related code in the same
source file inside util directory.
This patch takes the runtime part and extracts it into the new
storage_file directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This code is not directly relevant to virStorageSource so move it to
separate file.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduce a new storage_file directory where we will keep storage file
related code. Add a backend prefix to the file name to separate it from
other future files with 'storage_file' prefix.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently translated at 10.9% (1145 of 10451 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/fi/
Co-authored-by: Jan Kuparinen <copper_fin@hotmail.com>
Signed-off-by: Jan Kuparinen <copper_fin@hotmail.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Currently translated at 23.4% (2446 of 10440 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/pl/
Co-authored-by: Piotr Drąg <piotrdrag@gmail.com>
Signed-off-by: Piotr Drąg <piotrdrag@gmail.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Currently translated at 3.1% (329 of 10440 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/bg/
Co-authored-by: Nickys Music Group <nickys.music.group@gmail.com>
Signed-off-by: Nickys Music Group <nickys.music.group@gmail.com>
Currently translated at 23.4% (2444 of 10440 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/pl/
Co-authored-by: Piotr Drąg <piotrdrag@gmail.com>
Signed-off-by: Piotr Drąg <piotrdrag@gmail.com>
This patch creates a new function, virDomainDefBootValidate(), to host
the validation of boot menu timeout and rebootTimeout outside of parse
time. The checks in virDomainDefParseBootXML() were changed to throw
VIR_ERR_XML_ERROR in case of parse error of those values.
In an attempt to alleviate the amount of code being stacked inside
domain_conf.c, let's put this new function in a new domain_validate.c
file that will be used to place these validations.
Suggested-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Currently translated at 23.6% (2450 of 10354 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/pl/
Co-authored-by: Piotr Drąg <piotrdrag@gmail.com>
Signed-off-by: Piotr Drąg <piotrdrag@gmail.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Currently, slot 1 is only allowed to be used by the LPC device.
Relax this requirement and allow to use slot 1 if it was explicitly
specified by the user for any other device type. In this case the LPC
device will have the next available address.
If slot 1 was not used by the user, it'll be reserved for the LPC
device, even if it is not configured to make address assignment
consistent in case the LPC device becomes necessary (e.g. the user
adds a console or a video device which require LPC).
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
With libdbus our wrappers had a special syntax to create the DBus
messages by defining the DBus message signature followed by list
of arguments providing data based on the signature.
There will be no similar helper with GLib implementation as they
provide same functionality via GVariant APIs. The syntax is slightly
different mostly for how arrays, variadic types and dictionaries are
created/parsed.
Additional difference is that with GLib DBus everything is wrapped in
extra tuple (struct). For more details refer to the documentation [1].
[1] <https://developer.gnome.org/glib/stable/gvariant-format-strings.html>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There was one attempt a year ago done by me to drop HAL [1] but it was
never resolved. There was another time when Dan suggested to drop HAL
driver [2] but it was decided to keep it around in case device
assignment will be implemented for FreeBSD and the fact that
virt-manager uses node device driver [3].
I checked git history and code and it doesn't look like bhyve supports
device assignment so from that POV it should not block removing HAL.
The argument about virt-manager is not strong as well because libvirt
installed from FreeBSD packages doesn't have HAL support so it will not
affect these users as well [4].
The only users affected by this change would be the ones compiling
libvirt from GIT on FreeBSD.
I looked into alternatives and there is libudev-devd package on FreeBSD
but unfortunately it doesn't work as it doesn't list any devices when
used with libvirt. It provides libudev APIs using devd.
I also looked into devd directly and it provides some APIs but there are
no APIs for device monitoring and events so that would have to be
somehow done by libvirt.
Main motivation for dropping HAL support is to replace libdbus with GLib
dbus implementation and it cannot be done with HAL driver present in
libvirt because HAL APIs heavily depends on symbols provided by libdbus.
[1] <https://www.redhat.com/archives/libvir-list/2019-May/msg00203.html>
[2] <https://www.redhat.com/archives/libvir-list/2016-April/msg00992.html>
[3] <https://www.redhat.com/archives/libvir-list/2016-April/msg00994.html>
[4] <https://svnweb.freebsd.org/ports/head/devel/libvirt/Makefile?view=markup>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When accessing libvirtd over a SSH tunnel, the remote driver needs a way
to proxy the SSH input/output stream to a suitable libvirt daemon. This
is currently done by spawning netcat, pointing it to the libvirtd socket
path. This is problematic for a number of reasons:
- The socket path varies according to the --prefix chosen at build
time. The remote client is seeing the local prefix, but what we
need is the remote prefix
- The socket path varies according to remote env variables, such as
the XDG_RUNTIME_DIR location. Again we see the local XDG_RUNTIME_DIR
value, but what we need is the remote value (if any)
- The remote driver doesn't know whether it must connect to the legacy
libvirtd or the modular daemons, so must always assume legacy
libvirtd for back-compat. This means we'll always end up using the
virtproxyd daemon adding an extra hop in the RPC layer.
- We can not able to autospawn the libvirtd daemon for session mode
access
To address these problems this patch introduces the 'virtd-ssh-helper'
program which takes the URI for the remote driver as a CLI parameter.
It then figures out which daemon to connect to and its socket path,
using the same code that the remote driver client would on the remote
host's build of libvirt.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We delay converting the remote transport string to enum form until
fairly late. As a result we're doing string comparisons when we
could be just doing enum comparisons.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This patch takes care of just the obvious cases: there are
many more situations where the data we pass to configure_file()
could likely be obtained in a more effective way, but we can
address the low-hanging fruits as a first approximation.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
We've dumped all the snapshot helpers and related code into
qemu_driver.c. It accounted for ~10% of overal size of qemu_driver.c.
Separate the code to qemu_snapshot.c/h.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There's a lot of helper code related to the save image handling. Extract
it to qemu_saveimage.c/h.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemu_domain.c file is big as is and we should split it into
separate semantic blocks. Start with code that handles domain
namespaces.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
EXTRA_DIST is not relevant because meson makes a git copy when creating
dist archive so everything tracked by git is part of dist tarball.
The remaining ones are not converted to meson files as they are
automatically tracked by meson.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
CVE-2020-14339
When building domain's private /dev in a namespace, libdevmapper
is consulted for getting full dependency tree of domain's disks.
The reason is that for a multipath devices all dependent devices
must be created in the namespace and allowed in CGroups.
However, this approach is very fragile as building of namespace
happens in the forked off child process, after mass close of FDs
and just before dropping privileges and execing QEMU. And it so
happens that when calling libdevmapper APIs, one of them opens
/dev/mapper/control and saves the FD into a global variable. The
FD is kept open until the lib is unlinked or dm_lib_release() is
called explicitly. We are doing neither.
However, the virDevMapperGetTargets() function is called also
from libvirtd (when setting up CGroups) and thus has to be thread
safe. Unfortunately, libdevmapper APIs are not thread safe (nor
async signal safe) and thus we can't use them. Reimplement what
libdevmapper would do using plain C (ioctl()-s, /proc/devices
parsing, /dev/mapper dirwalking, and so on).
Fixes: a30078cb83
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1858260
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Update translation files
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
There is no need to provide relative paths to the current directory if
we provide search paths using --directory option for xgettext.
In addition it will make libvirt.pot file look cleaner as it will not
contain relative paths to current directory. It improves the situation
for developers which are using different build path as that would
change the relative path in libvirt.pot as well. After this patch
it will not happen anymore.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Update translation files
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
All the domain job related APIs were present in `qemu_domain.c`
along with the other domain APIs. In this patch, we move all the
qemu domain job APIs into a separate file.
Also, in this process, `qemuDomainTrackJob()`,
`qemuDomainFreeJob()`, `qemuDomainInitJob()` and
`qemuDomainObjSaveStatus()` were converted to a non-static
funciton and exposed using `qemu_domain.h`.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Update translation files
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Now that we're storing libvirt.pot in git, it will be in srcdir instead
of builddir. Weblate is responsible for running msgmerge when the .pot
file changes, so add a warning that this target is not for general usage.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We're no longer using Zanata, so remove the old push/pull rules.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The old information about managing PO files was outdated, as we're
managing files in a different way with Weblate. This also introduces a
badge showing the translation progress across languages.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Weblate gets confused if the same email address is mentioned multiple
times in the translation headers. Dedupe authors so that each author
is mentioned only once, with a range of years listed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To integrate with weblate the only practical option currently is to
store the .pot file in git. This is required so that it can add new
languages by cloning the .pot file. It also enables weblate to run
msgmerge on the languages whenever pulling in new changes from git.
The pot file will have to be the full content including the source
locations, so this is going to result in unpleasant diffs when it
is updated periodically.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We previously adopted a minimization technique for po files which
stripped source locations and non-translated msgids in order to save
space in the git repos and have saner commit diffs.
At this time it is not possible to integrate with weblate while having
non-translated msgids stripped, as it will immediately add them back
again.
By keeping all non-translated msgids, our .po files are about x2 the
size at 37 MB vs the original 18 MB. This is still way better than the
original po/ directory which was 109 MB. We're saving 38 MB by still
omitting source file locations, and another 34 MB are saved by the
dropping of all languages which are 100% untranslated.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The .po files are stored with strings in alphabetical order instead of
source file location order, because this minimizes the diffs created
when code moves around within or between files.
By default msgmerge will honour the order of strings in the .pot file
when creating a .po file, so it is useful if we also create the .pot
file with desired ordering.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A .mini.po file is exactly the same format as a .po file. We just used
the alternative extension as we wanted to be able to store both full and
minimized forms in the same directory.
This complicates integration with some translation tools, however, which
only really expect to see $LANG.po as a filename.
With this change we drop the rules for creating non-minimized po files,
and thus the po/*.po are always minimized. A useful side effect is that
we no longer run msgmerge during creation of the gmo files, and thus
don't need to have a date override to get reproducible builds.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is no need to keep .po files which are 100% untranslated in
git. New languages can be added on demand.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To enable translation management systems to add new languages they need
to be able to modify the supported language list. The LINGUAS file is a
simple standard format that can be used for the language list, as this
is easier than modifying make variables.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Long ago we switched the vbox driver to run inside libvirtd to avoid
libvirt.so being polluted with GPLv2-only code. Since libvirtd is not
built on Windows, we disabled vbox on Windows builds. Thus the MSCOM
glue code is not required.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We've adopted reStructuredText as the primary markup language for
our documentation and, given that both GitLab and GitHub can render
documents in this format just fine, it makes sense to get rid of
the few last remaining bits of Markdown and standardize on
reStructuredText across the board.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch introduces a new file to host domain validations from
the QEMU driver. And to get things started, let's move
qemuDomainDefValidateFeatures() to this new file.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Several daemons have similar code around general daemon startup code.
Let's move it into a file and share it among them.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a unit to start & stop a private dbus-daemon.
The daemon is meant to be started on demand, and associated with a
QEMU process. It should be stopped when the QEMU process is stopped.
The current policy is permissive like a session bus. Stricter
policies can be added later, following recommendations from:
https://git.qemu.org/?p=qemu.git;a=blob;f=docs/interop/dbus.rst
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This code was based on a per-helper instance and peer-to-peer
connections. The code that landed in qemu master for v5.0 is relying
on a single instance and DBus bus.
Instead of trying to adapt the existing dbus-vmstate code, let's
remove it and resubmit. That should make reviewing easier.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The functionality is now provided by glib's GKeyFile.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We want a way to easily run a private GMainContext in a
thread, with correct synchronization between startup
and shutdown of the thread.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virbpf module wraps syscalls to BPF. However, if the kernel
headers used at the compile time don't have support for BPF the
module offers stubs which return a negative one to signal error
to the caller. But there is a slight discrepancy between real
functions and these stubs. While the former set errno and return
-1 the latter report an error (without setting the errno) and
return -1. This is not optimal because the caller might see stale
errno and overwrite the error message with a less accurate one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Start virtiofsd for each <filesystem> device using it.
Pre-create the socket for communication with QEMU and pass it
to virtiofsd.
Note that virtiofsd needs to run as root.
https://bugzilla.redhat.com/show_bug.cgi?id=1694166
Introduced by QEMU commit a43efa34c7d7b628cbf1ec0fe60043e5c91043ea
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Just like virhostdev, this depends on domain_conf and
it's shared by multiple hypervisor drivers.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This module depends on domain_conf and is used directly by various
hypervisor drivers.
Move it to src/hypervisor.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After the introduction of virDomainDriverMergeBlkioDevice() in a
previous patch, it is now clear that lxcDomainSetBlkioParameters() and
qemuDomainSetBlkioParameters() uses the same loop to set cgroup
blkio parameter of a domain.
Avoid the repetition by adding a new helper called
virDomainCgroupSetupDomainBlkioParameters().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
lxcDomainMergeBlkioDevice() and qemuDomainMergeBlkioDevice()
are the same functions. This duplicated code can't be put in
the existing domain_cgroup.c since it's not cgroup related.
This patch introduces a new src/hypervisor/domain_driver.c to
host this more generic code that can be shared between virt
drivers. This new file is then used to create a new helper
called virDomainDeivceMergeBlkioDevice() to eliminate the code
repetition mentioned above. Callers in LXC and QEMU files
were updated.
This change is a preliminary step for more code reduction of
cgroup related code inside lxcDomainSetBlkioParameters() and
qemuDomainSetBlkioParameters().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>